LG | WD-1274FHB | LG WD-1274FHB Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD-1274(6)FHB
WD-1074(6)FHB
WD-8074FHB
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Jumbo drum
40%
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
water level and
consumption.
Child-Lock
The Child-Lock
pressing
system has been used
any button to
Low noise
change
to
prevent children from
the program
during operation.
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
W arnings
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
or injury
precautions, including the following:
store the washer where it will
?
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
recommended in the user-maintenance
instructions
or
published user-repair instructions
?
that you understand and have the skills to carry
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals,
?
?
?
have been
or
etc.
Do not leave the washer door open.
An open door could entice children to
or
hang
Never reach into washer while it is
laundry process
retardant of fabrics.
can
Wait
reduce the flame
or
try to
possibility of electric shock,
unplug this appliance from the power supply
To minimize the
or
disconnect the washer at the household
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
distribution
?
moving.
completely stopped.
The
?
on
crawl inside the washer.
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
supervision is necessary if this appliance
is used by or near children.
Do not allow children to play on, with, or inside
this or any other appliance.
until the drum has
?
?
Close
the door
dry articles that
instructions.
out.
?
or
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
combustible
Do not
or
Do not wash
using
cleaned in, washed in, soaked in,
exposed to the weather.
Do not
to persons when
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
?
?
If you don't have the proper outlet, consult
WARNING :
an
electrician.
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
Improper
shock. Check with
a
-
3
S pecification
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
or its service agents
similarly qualified person in
manufacturer
Drawer
or a
(For detergent and
fabric softener)
order to avoid
Control
a
hazard.
panel
Drain hose
Door
Lower
cover
Drum
Adjustable
Drain pump filter
Lower
Drain
feet
cover
cap
plug
Name
:
Front
:
240V~,50Hz
Size
:
Weight / Max.Watt
Wash capacity
Spin speed
:
Water
:
600mm(W) 600mm(D) 850mm(H)
63kg / 2100W
7.0kg
No Spin/400/600/800[WD-8074FHB]
No Spin/400/600/800/1000[WD-1074(6)FHB]
No Spin/400/600/800/1000/1200[WD-1274(6)FHB]
86 (12 / kg )[WD-8074FHB]
84 (12 / kg )[WD-1074(6)FHB]
87 (12 / kg )[WD-1274(6)FHB]
0.3-10kgf/ (30-1000kPa)
Power
supply
:
:
consumption
loading washing
machine
Permissible water pressure :
The external hot water supply 60˚C and must NOT be above 70˚C
Permissible cold water
temperature : 4-25˚C
co.y with the requirement by certification Type Test Mark.
No further backflow protection required for connection to the water supply.
TT
:
Appliance
The appearance and
specifications
may be varied without notice to raise the units
Accessories
Inlet hose
4
:
Hot/Cold(2EA)
Spanner
quality.
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin, pay particular
are areas
attention to
is installed
on a
which may be subject to infestation by cockroaches or other
keeping the appliance and its surroundings in clean condition
at all times.
Any damage which may
appliance guarantee.
be
cause
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
appliance
is fitted with transit bolts to
Removing
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
along
with the rubber
vibration,
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
not removed, it may cause
noise and malfunction.
are
3. Take out the 4 bolts
heavy
?
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
I
nstallation
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
than
Laundry
one
appliance.
Additional Clearance :
For wall, door and floor modeling is
Tub
approx.
2cm
(10cm
: rear
Do not
place
/2cm:right
or
store
& left
required.
side)
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
Green and Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
or coloured Green or Green and Yellow.
letter E or by the earth symbol
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
identifying
6
nstallation
I
Electrical connection
1. Do not
3.
extension cord
use an
cord is
5. The
?
?
appliance
or
it must be
4. Connect the machine to
?
double
adapter.
supply
damaged,
replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
2. If the
must be
an
manufacturer
after
so
that the
plug
is
easily
its service agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
Washing Machine
is to be connected to the water mains
sets and that old hose-sets should not be used.
Connecting
water
using
new
hose-
supply hose
Water supply pressure must be between
30kPa and 1000kPa (0.3~10kgf/cm2)
Don't
strip or crossthread when connecting
Inlet hose
to
the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the tap
completely
?
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Hot water tap
Cold
Hot(option)
Cold
water
Make sure that there is no kink
hose and that it is not crushed.
When your washer has
tap
?
?
two
on
the
valves,
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
2.
screw
type inlet hose
Push the connector up till the
rubber
packing
3.
is in
with the tap. Then
tight contact
tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
2.
touch type inlet hose
one
Push the upper connector up till
the rubber packing is in tight
screw.
contact with the
Upper
Rubber
Connector
Fixing
screw
tighten
packing
Middle
connector
the 4
Rubber
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
(Single
3. Connect the
water
inlet
supply
models)
hose
to the middle connector,
tap. Then
pushing
the
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Guide
Water
Middle
connector
remove
plate
?
hose
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
caravans, aircraft etc.
Turn off the stopcock if the machine is to be left for any length of time
especially if there is no floor drain(gully) in the immediate vicinity.
When
of the
disposing
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the plug Disable
the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
of suffocation !
all
Keep
packaging
as
a
risk
well away from children
Installation of drain hose
ca.
ca.
100 cm
145 cm
?
max.10cm min.60cm
When
secure
ca.
105 cm
?
installing the drain hose sink,
it tightly with a string.
Proper securing
of the drain hose will
protect the floor from
water
damage
due to
leakage.
Laundry tub
ca.
100 cm
Hose
ca.
Retainer
145 cm
Tie
100cm
min. 60cm
max.
ca.
?
The drain hose should not be
higher
?
min.60cm max.10 cm
105 cm
than 100
Proper securing
cm
?
strap
placed
above the floor.
of the drain hose will
protect the floor from damage due
water
100cm
min. 60cm
max.
to
leakage.
When the drain hose is too
long,
do
not force back into the washer. This
will
cause
abnormal noise.
9
I
nstallation
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
floor
the
appliance
on a
solid and level
surface, preferably in
of
a corner
room.
2. If the floor is uneven,
feet
adjustable
insert pieces
Make
sure
as
adjust the
required. (do not
of wood etc. under the
that all four feet
are
feet)
stable
and
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
that the
Adjustable feet
Higher
a
Lower
Adjustable feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
move
the
up and down at
all. (Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
10
C
are
before
washing
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that
can
be washed with the
same
wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
causing discoloration
lightly soiled one.
can occur
soiled items with
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
3.
Caring
before
of white etc. If
do not wash
possible,
heavily
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets to
make
sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
recommended amount,
occur
used more than the
many suds can
and this will decrease the washing result
too
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
(Causing
a
detergent only for the front
washer.
Detergent usage
for water
?PreWash+MainWashU
motor.
may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
the last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the clothes
directly
12
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
at
unction
F
Recommended
according
courses
Fabric
to the
First check if
Whites
laundry
95˚C
Eco
washable.
(60˚C, 50˚C,
40˚C)
Rinse+
in
kWh
Minutes
Synthetic Polyamide, Acryic,
Polyester
40˚C
(50˚C, 60˚C,
Cold, 30˚C)
Delicate
laundry
easily damaged
(silk, curtains...)
(40˚C, Cold)
Machine washable
(40˚C, Cold)
Hand
"Hand Wash" marked
Wash
delicate and wool
:
Cold(30˚C,
40˚C)
Rating
Bio
the
Energy
115
Label
Rapid
Pre Wash
Eco
Rinse+
Less than
3.5
0.45
88
0.41
58
0.28
58
0.03
57
kg
Bio
Less than
Rinse+
3.0
kg
Less than
Rinse+
Rinse+
2.0
kg
Less than
2.0
kg
If the laundry is heavily soiled, "Pre Wash" course is recommended. Pre Wash is available in
Coloureds, Whites and Synthetic Program.
By selecting
you
Rinse+
30˚C
woolens with pure
new wool only
Pre Wash
158
Refer to
Eco
30˚C
laundry
2.74
Bio
Pre Wash
(shirts, night dresses,
40˚C
pajamas...)and lightly (50˚C, 60˚C,
soiled white
Cold, 30˚C)
cotton(underwear...)
Wool
Rating
Rapid
Coloureds Color fast gaments
Delicate
Time
in
Pre Wash
is machine
(white cotton, linen
sheets...)
can
Eco function, the water temperature is reduced and
consumption of heating energy.
washing time
is
lengthened.
So
economize in your
Rinse+: Used to introduce
:
Load
Temp.
towel and
Bio
Energy
Option
Type
:
Maximum
Proper
Program
Eco
laundry type
an
additional rinse, which may assist in
If you want to eliminate protein stains
the option button.
removing traces
(milk, blood, chocolate...),
of
detergent
residue.
you may select Bio function
by
pressing
NB. You
can
only select Bio function
Synthetic.
and Eco function when
temperature is higher than 60˚C in Whites,
Coloureds and
13
H
ow
to
1. Coloureds
use
washer
automatically
selected upon power
2. Manual
?
Press the Power button to start.
?
?
Press the Start/Pause button.
?
?
Initial condition
-
Wash
:
main wash
-
Rinse
:
3 times
Water temperature
:
40˚C
Program : Coloureds
14
Select the conditions which you want to
use, by pressing each button.
selecting the each conditions, please
refer to the page15~page20
?
-
Press the Power button to start.
For
-Spin:800rpm
-
Selecting
on.
Press the Start/Pause button.
H
ow
to
use
(1)
(1)
(2)
(3)
Button
:
Button
:
Button
:
washer
(2)
(3)
(4)
(5)
(6)
By pressing
button, only
(7)
(8)
(9)
(9)
Button
Dial
?
the
Option
one Option
Start/Pause
:
Power
By selecting Eco function, the water
temperature is reduced and washing time is
Bio
lengthened. So you can
consumption of energy.
-
Rinse+
NB. You
function may be selected.
-
:
Program
Button
-
-
:
3. Eco
Option
economize in your
select Eco function when
can
is
Eco
temperature
Pre Wash
Coloureds and
higher than
Synthetic.
60 C in
Whites,
4. Pre Wash
1. Bio
?
(8)
(4) Child Lock
(5) Button : Time Delay
(6) Button : Rapid
Option
Spin
Temp.
?
(7)
If you want to eliminate protein stains(milk, blood,
chocolate...), you may select Bio function by
pressing the option button.
[You can select Bio function when temperature
higher than 60 C in Whites, Coloureds and
Synthetic.]
?
?
is
If the
laundry
course
is
heavily soiled,
Pre Wash is available in
Coloureds and
The
"Pre Wash"
is effective.
Whites,
Synthetic.
required lamp
identification.
will
light up for
2. Rinse+
?
Used to additional
removing
?
rinse, which may assist in
traces of
detergent
By selecting Rinse+ function,
and the rinse water
are
residue.
the rinse time
increased.
15
ow
H
to
use
washer
Spin
?
WD-1274(6)FHB
-
Whites / Coloureds
800U 1000U 1200U Rinse HoldU
No
-
SpinU 400U
Synthetic
600
800U 1000U Rinse HoldU No
SpinU
400U 600
-
[WD-8074FHB]
[WD-1274(6)FHB]
[WD-1074(6)FHB]
-
?
By pressing
can
the
Spin button,
the
spin speed
Spin speed
program
?
as
is available
Spin
2. No spin
according
to the
-
Delicate / Wool / Hand Wash
Spin
WD-1074(6)FHB
Whites / Coloureds/Synthetic
?
400U 600
-
?
Delicate
400U 600U 800U Rinse HoldU No
Spin
Wool / Hand Wash
400U 600U 800U 1000U Rinse HoldU No
Spin
16
will
the washer stops after
light up for
3. Rinse Hold
800U 1000U Rinse HoldU No
SpinU
spin is selected,
draining water.
no
required lamp
identification.
-
-
If
The
Whites / Coloureds / Synthetic
800U Rinse HoldU No SpinU 400U 600
400U 600U 800U Rinse HoldU No
?
?
follows.
WD-8074FHB
-
Spin
Wool / Hand Wash
400U 600U 800U 1000U Rinse HoldU No
be chosen.
1. Spin selection
?
Delicate
400U 600U 800U Rinse HoldU No
Is selected
by pressing the spin button
repeatedly this function leaves clothes in the
machine; suspended in the water after a
rinse without entering into spin.
To proceed through to a drain or spin, once
the rinse hold function is completed using to
program dial scroll to the required program.
(Spin or Pump)
The
required lamp
identification.
will
light up for
H
ow
to
use
washer
Child Lock
Water Temp.
By pressing
?
the
Temp.
button, the water
temperature can be
selected.
-
Cold
-30˚C/40˚C/50˚C/60˚C/
If you choose to lock the buttons on the
control assembly to prevent tampering this
function may be selected.
95˚C
1. Child Lock
?
-
-
Water temperature can be selected
below according to the program.
Whites
95˚C U 40˚C
U
50˚C
U
Coloureds & Synthetic
50˚CU 60˚CU
40˚CU
-
Hand Wash
U 30˚C
The
U
60˚C
?
more
When child lock is set, all buttons
are
ColdU 30˚C
inoperable.
To deactivate Child Lock
and Time
system, press Temp.
Delay button simultaneously again.
40˚C
required temperature lamp
identification.
For the
by pressing the Temp.
Delay button simultaneously.
Time Left
Delicate & Wool
30˚C U 40˚C U Cold
Cold
be set
as
?
-
can
button and Time
1. Water Temperature
?
Child Lock
Time Left
will light up for
detailed information, please
refer
?
to the page13.
To
change to the desired
program, whilst in child
lock mode.
1. Press both
once
Temp.
and Time
Delay together
again.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button
again.
Change
the desired
program
?
The child lock
can
be set at any time and it is
automatically canceled when operational
occur.
errors
Also Child Lock works when power is off.
17
to
ow
H
use
Time
washer
Rapid
Delay
?
By pressing
the
Rapid
button, Rapid function is
selected.
Time Left
Time Left
1. Rapid
1. Time
Delay
?
Preparing washing before starting
Delay"
Turn on the water tap.
-
Load
"Time
machine encounters
the
laundry and close the door.
detergent and fabric softener
Place the
function reduces the entire
Rapid
program time by approximately half an hour.
Program time will be extended if the
-
-
The
cycle
program.
The
in
abnormality during
an
required lamp
identification.
will
light up for
the drawer.
Program
?
How to set "Time
-
-
-
Delay"
?
Press Power button.
Turn the
Program
dial to select
the
type.
Press the Start/Pause button.
?
If Time Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
?
?
pressing of the button
delay by one hour.
To cancel the time
delay,
advances
on
-
Time
or
?
is
to the
selected
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time
18
may vary.
the
Program dial,
Delicate
U
Wool
U
Rinse+Spin
U
Spin
U
U
press the Power
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
present
By turning
pressed, the
automatically selected.
the program is
selected in order of "Coloureds
button.
?
When Start/Pause button is
Coloureds program is
Each
time
(Program)
1. Program
hours.
?
Lamp will light
up to indicate
selected program.
(":" blinks.)
?
are
according to
laundry
the program you require.
Press Time Delay button and set the
desired time.
-
9 programs
available
U
Synthetic
Hand Wash
U
Whites".
PumpU
Regarding to the laundry type for each program
Please refer to the page13.
2. Course
-
Whites
-
-
Coloureds
-
-
Synthetic
-
Delicate
Wool
Hand Wash
-
-
-
Rinse+Spin
Spin
Pump
ow
H
to
use
washer
Start/Pause
Power
1. Power
1. Start
?
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
cycle.
?
2. Pause
?
If
temporary stop of wash cycle is needed,
When in
Pause, the power is turned off
automatically
?
To cancel the Time
Delay function,
pressed.
if the
2. Initial Program
?
after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
on
power button should be
press the Start/Pause button.
?
Press the Power button to turn power
and off
at the end of the wash
When the Power button is
pressed,
the
for Coloureds program.
And the other initial conditions as follows.
?
cycle.
washer is
ready
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
Initial program
-
Coloureds
Program / Main
wash /
Normal Rinse/800 rpm / 40˚C
19
H
ow
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
"
1. Special function
?
When child lock is selected, the
is displayed.
"
"
?
display
If the machine encounters
operation;
displayed
a
fault
4. Time left
during
?
the associated fault will be
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
2. Self
diagnosis display
If the machine encounters
operation,
displayed.
"
"
"
"
"
"
"
"
"
"
"
"
"
:
Door is not closed
:
Over load in motor.
:
Over load in motor.
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
If these
sensing
Problem of
"
"
during
-
-
:
"
"
fault
the associated fault will be
Water pressure
:
"
a
overfilling
-
error
water
-
-
-
-
-
letters
Whites
:
Coloureds
around 2 hours and 38 minutes
:
around 1 hour and 55 minutes
Synthetic
:
around 1 hour and 28 minutes
Delicate
:
around 58 minutes
Wool
:
around 58 minutes
Hand Wash : around 57 minutes
Rinse+
Spin
:
Pump
Spin
:
around 19 minutes
around 11 minutes
:
around 1 minute
trouble
?
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
amount of
Water temperature trouble
displayed, please
refer
troubleshooting page24 and
follow the guide.
error
by
manufacturer.
-
?
washing
are
conditions.
to the
?
If
an
unbalanced load is detected
the suds
or
if
removing program operates,
the wash time may be extended.
(Max. increasing time is 45minutes.)
20
M
aintenance
Before
the washer interior,
cleaning
unplug the electrical power cord to avoid
electrical shock to
avoid electrical shock hazards.
When
disposing
of the
appliance, cut off the mains cable,
being trapped inside.
and
destroy the plug
Disable the door
lock to prevent young children
The water inlet filter
-"
"
message will blink
error
detergent
If your water is very hard
-
become
on
the control
panel
when water does not enter the
drawer.
clogged.
a good
It is therefore
or
contains traces of lime
deposit,
the water inlet filter may
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the filter
CAUTION
First drain
is clean to
using
objects left
in the
smooth
ensure
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever any threads
or
remove
objects.
Be careful when
Allow the water to cool
emptying
1.
or
opening
Open the lower cover
cap( )byusinga
draining if the water is hot.
down before cleaning the drain pump, carrying
the door in
2.
an
out emergency
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Remove out any
At
foreign material
( ). After
the pump filter ( )
from the pump filter
coin. Turn the drain
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
use a
flowing
vessel to
on
prevent
to the floor. When
( )
open to the left.
cleaning,
turn
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
3
2
2
21
aintenance
M
Dispenser drawer
After
?
?
?
a
while
and fabric softeners leave
detergents
It should be cleaned from time to time with
a
jet
of
a
deposit
running
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
water.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
?
with
occasionally
washing
?
?
recess
which should
old toothbrush.
replace
the drawer and
run a
drum
If you live in a hard water area, limescale may
seen and thus not easily removed.
Over time the build up of scale
be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
recess
also accumulate inside the
continuously
clogs appliances,
build up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
Although
the
washing
If you
use
descaling agents, dyes
or
bleaches, make
sure
they
kept
places where
in check these may have to
of rust
can
be caused
Remove any
Never
22
use
spots with
steel wool.
a
stainless steel
damage part
are
of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler may contain chemicals that may
it cannot be
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and
a
neutral
non
abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
damp
cloth.
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
opening,
flexible
a
Remove hard water
and door
glass.
hot water.
through complete cycle using
Repeat process if necessary.
NOTE
gasket
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV) antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
dispenser
8. Store washer in
9. To
remove
through
a
an
for 1minute to drain out all water.
expelled.
dry the
drawer drain and
drum
dry
interior, and close the door.
excessive water from the compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
T roubleshooting guide
This
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop washer
and check drum
and drain filter.
If noise continues after washer
pump.
is
restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
redistribute wash load.
If not removed
Have all the transit bolts and
packing
been removed?
Are all the feet
the
If sound continues, washer is
probably out of balance. Stop and
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
is not
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
hose(s)
are
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse
breaker
blown, circuit
tripped,or
a
power
outage has occurred.
Reset circuit breaker
Do not increase fuse
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
Turn
by a qualified electrician.
on water supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
25
T roubleshooting guide
Possible Cause
Symptom
?
Water
?
Water
?
?
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
are
Check another tap in the house.
Fully open tap.
Straighten hose(s).
kinked.
hose(s)
Solution
clogged.
Check the filter of the inlet hose.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
Rearrange
spinning
appliance
or clogged.
clogged.
has
an
imbalance
detection and correction system. If
individual heavy articles are loaded
(ex.
bath mat, both robe,
or
straighten the
drain hose.
2 similar items to
help
load to allow proper
etc.) this system
interrupt the
may stop spinning
spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry
to balance the load and repeat the spin
cycle.
or even
?
?
Is the door
Close the door.
opened?
If"
"is not released, call for service.
Unplug the
power
plug
service.
?
Water overfills due to the
faulty water
valve.
26
Close the water tap.
Unplug the power
Call for service.
?
Water level
?
Over load in motor.
?
Over load in motor.
sensor
has malfunctioned.
plug.
and call for
T
of Warranty
erms
What Is Not Covered:
?
?
?
?
Service
to your home to teach you how to use the
trips
If the
product
rating plate.
is connected to any
voltage
product.
other than that shown
the
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
or
change the set-up of the product.
by pests for example,
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
of
Correcting
or
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
by the
owner's manual.
foreign objects / substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
?
?
?
Replace
or
correct house
Correction of unauthorized
Incidental
possible
?
fuses in
If this
or
wiring
or
correct house
plumbing.
repairs.
consequential damage to personal property
appliance.
caused
by
defects with this
product
is used for commercial purpose, it is not warranted.
Public
(Example
places
center, dormitory)
:
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
P/No.: 3828ER3010K
Download PDF