LG | WD-1460FHD | LG WD-1460FHD Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD-1060F(H)D/1065F(H)D
WD-1260F(H)D/1265F(H)D
WD-1460F(H)D/1465F(H)D
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
!
40%
Jumbo drum
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
!
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
!
Direct Drive
water level and
consumption.
System
The advanced Brushless DC motor rotates the Drum
without belt and
!
Wash
Child-Lock
The Child-Lock
Rinse
pressing
!
system has been used
any button to
Low noise
change
to
prevent children from
the program
during operation.
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
!
directly
pulley.
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................20
Troubleshooting guide
2
.............................................................23
W arnings
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
Do not install
be
?
?
or
store the washer where it will
?
exposed to the weather.
Do not
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
instructions
or
published user-repair
instructions
?
that you understand and have the skills to carry
using
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals,
The
Do not wash
or
dry
articles that have been
in, washed in, soaked in,
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
or
instructions.
out.
?
to persons when
combustible
recommended in the user-maintenance
?
injury
cleaned
Do not
or
or
washer, follow basic precautions, including the following:
appliance
?
etc.
is not intended for
use by young
infirm persons without supervision.
children should be supervised to ensure
children
Young
that they do
?
Do not leave the washer door open.
An open door could entice children to
the door
?
or
not
play with
the
?
The
until the drum has
hang
on
?
moving.
completely stopped.
laundry process
retardant of fabrics.
can
this
possibility of electric shock,
appliance from the power supply
or
distribution
crawl inside the washer.
Never reach into washer while it is
try to
disconnect the washer at the household
appliance.
?
or
To minimize the
unplug
or
?
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
Wait
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
pecification
S
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
or its service agents
similarly qualified person in
Drawer
or a
(For detergent and
fabric softener)
order to avoid
Control
a
hazard.
panel
Drain hose
Door
Lower
cover
Drum
Leveling leg
Drain pump filter
Lower
Drain
cap
plug
∀
Name
∀
Power
supply
:
Front
:
240V~,50Hz
600mm(W)
65kg
loading washing
∀
Size
:
∀
Weight
Wash capacity
:
:
Refer to the
∀
Max. Watt
:
2100W
∀
Spin speed
:
∀
cover
machine
600mm(D)
Rating
850mm(H)
label
No
Spin/400/600/800/1000[WD-1060F(H)D]
Spin/400/800/1000/1200[WD-1260F(H)D/WD-1265F(H)D]
No Spin/400/800/1000/1400[WD-1460F(H)D/WD-1465F(H)D]
:75
(10.7 /kg)
: 0.3-10kgf/
(30-1000kPa)
No
∀
Water
∀
Permissible water pressure
∀
The hot water should
∀
Permissible cold water
∀
TT
∀
No further backflow
:
consumption
Appliance
requirement by certification Type Test Mark.
protection required for connection to the water supply.
and specifications may be varied without notice to raise the
Accessories
Inlet
4
60˚C and must NOT be above 70˚C
temperature : 4-25˚C
co.y with the
The appearance
∀
ideally be
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
units
quality.
nstallation
I
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Install
Transit bolts
!
The
appliance
is fitted with transit bolts to
Removing
!
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
?
?
If
they
are
not
removed, it may
use.
bungs.
cause
heavy
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
vibration, noise and malfunction.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
!
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
under entire washer is 1˚
slope
Power outlet
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with
than
Laundry
one
Additional Clearance :
For wall, door and floor modeling is
Tub
approx.
2cm
more
appliance.
(10cm
: rear
Do not
place
/2cm:right
or
store
& left
required.
side)
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
!
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
Green and Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
identifying
letter E
or
by
the earth
symbol (
)
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
!
Electrical connection
1. Do not
or double adapter.
supplied from a cord extension set or electrical portable outlet device the
cord set or electrical portable outlet device should be positioned so it is not subject to
splashing or ingress of moisture.
Always unplug the machine and turn off the water supply after use.
Connect the machine to an earthed socket in accordance with current wiring regulations.
The appliance must be positioned so that the plug is easily accessible.
2. If the
3.
4.
5.
!
use an
extension cord
appliance
is
Washing Machine
is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
!
Connecting
water
supply hose
Water
supply pressure must be between
(0.3~10kg.f/cm2)
30kPa and 1000kPa
Don't
strip or crossthread when connecting
Inlet hose to the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the
completely
?
tap
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Hot water
?
Hot(option)
on
the
When your washer has two valve,
tap
Cold
Cold
Make sure that there is no kink
hose and that it is not crushed.
water
tap
?
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
!
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
2.
screw
type inlet hose
Push the connector up till the
rubber
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
!
Normal Tap without thread &
1. Untighten the upper
connector
2.
touch type inlet hose
one
Push the upper connector up till
the rubber
screw.
packing
contact with the
Upper
Rubber
Connector
Fixing
tighten
packing
screw
Middle
the 4
Rubber
connector
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
tap is
Connector
Water
hose
Middle
guide plate.
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
tap. Then pull the
down, pushing the
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
I
!
nstallation
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
ca.
105
When
installing the drain hose sink,
it tightly with a string.
secure
cm
?
Proper securing the drain hose will protect
damage due to water
leakage.
the floor from
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
max.
ca.
?
than 100
Proper securing
protect
water
?
cm
placed
?
above the floor.
the drain hose will
the floor from
damage
due to
leakage.
When the drain hose is too
strap
100cm
min. 60cm
min. 60cm
min.60cm max.10cm
cm
The drain hose should not be
higher
?
105
100cm
max.
When
installing the drain hose sink,
it tightly with a string.
secure
?
Proper securing the drain hose will protect
damage due to water
leakage.
the floor from
long, please
don't fill into the washer. This will
cause
abnormal noise.
9
I
!
nstallation
Level
adjustment
1.
the
a
prevents
excessive noise and vibration.
Install the
floor
the
washing
machine
Leveling
appliance
on a
properly
solid and level
surface, preferably in
a corner
of
room.
2. If the floor is uneven, adjust the leveling
feet as required. (do not insert pieces of
wood etc. under the
Make
sure
feet)
that all four feet
are
stable
and
resting on the floor and then check
that the appliance is perfectly level. (use
a spirit level)
Leveling leg
Higher
Lower
Leveling leg
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
move
the
up and down at
(Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the legs again.
all.
10
C
!
before
are
washing
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
temperature and spin speed and different fabrics need to be washed in different ways.
Water
Always
transfer
sort dark colors from
soiled items with
Soil
3.
Caring
!
before
colors and whites. Wash
separately as dye and lint
possible, do not wash heavily
one.
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
pale
discoloration of white etc. If
causing
lightly soiled
can occur
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all the
that
as
pockets
to make sure
empty. Things such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hook and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
A dding detergent
!
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
used more than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
(Causing
a
detergent only for the front
washer.
Detergent
for water
?PreWash+MainWashU
motor.
usage may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
directly
12
on
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
the cloths
at
F
!
unction
Recommended
courses
Fabric
according
Proper
Temp.
(Option)
Program
Type
to the
laundry type
Water
Energy
in
in
in
Load
Liter
kWh
Minutes
Rating
75
0.47
119
Less than
55
0.39
92
55
0.15
65
55
0.05
55
Washing Maximum
(Option)
Time
Coloureds Color fast garments
(shirts, night
40˚C
dresses,
(Cold, 30˚C, Main(+Pre)
60˚C)
pajamas...)and
lightly soiled white
cotton
(underwear...)
40˚C
Synthetic Polyamide, Acrylic,
(Cold, 30˚C, Main(+Pre)
Polyester
60˚C)
Delicate
Wool
Rapid
laundry
easily damaged
(silk, curtains...)
Machine washable
Cold
(30˚C,
40˚C)
Laundry type is the
in Coloureds
and
Synthetic.
kg
Less than
Main
(30˚C,
40˚C)
woolens with pure
new wool only
same
Whites
Cold
Delicate
4.0
3.0
kg
Less than
Main
2.0
kg
Cold
Main
Rating
55
0.10
54
Main(+Pre)
Rating
90
2.74
162
Main(+Pre)
Rating
70
1.13
178
(30˚C,
40˚C)
First check if
laundry is machine
washable.
(white cotton,
95˚C
(40˚C,
60˚C)
linen
towels and
sheets...)
WhitesEco
Laundry type is the
in Whites.
same
Pre Wash
Water
:
For
heavily
Temperature
60˚C
(40˚C)
:
soiled and
protein-stained
Select the water
garment
items.
temperature
manufacture's
care
to the wash
label
or
cycles. Always
follow
instructions when
laundering.
13
ow
H
to
use
washer
Synthetic
Coloureds
Whites-Eco
Delicate
Rapid
Start/Pause
use
in the initial
programme
To start
?
Push the Start/Pause button.
?
the Power button.
Wash
:
Only main
-
Rinse
:
3 times
wash
-
Water temperature
:
40˚C
Program : Coloureds
14
60
Rinse Hold
600
40
400
30
Main Wash
Normal
Wash
Rinse
2. Manual
?
?
No
Spin
Spin
Cold
Temp.
Selecting
To start
push
the Power button.
Select the conditions which you want to
use, by pressing each button.
For selecting the each
conditions, please
refer to the page15~page19
?
-Spin:800rpm
-
95˚C
800
Super
Time Left
Initial condition
-
1000
(Coloureds)
?
push
Delay
Pre Wash
Wool
e
Whites
1. For
Time
Push the Start/Pause button.
ow
H
to
use
washer
Synthetic
Coloureds
Whites-Eco
Wool
e
Whites
Button
Dial
:
:
Programme
Button
:
Start/Pause
Super
Normal
Wash
(3)
(4)
(2)
Power
Pre Wash
Main Wash
Start/Pause
95˚C
1000
60
800
40
400
30
No
Rinse
(5)
1400
Delay
Rinse Hold
Time Left
Rapid
(1)
(1)
(2)
(3)
Time
Delicate
Cold
Spin
Spin
(6)
Temp.
(7) (8)
(4) Button : Wash
(5) Child lock
(6) Button : Rinse
(9)
(7)
(8)
(9)
Power
Button
:
Time
Button
:
Spin
Button
:
Water
7 programs
are
available
according
laundry type.
-
-
1. Power
-
-
Press the Power button to turn power
on
and off
?
To cancel the Time
can
Temp.
Programme
?
?
Delay
Delay function, it
-
to the
Synthetic
Coloureds
Coloureds
Synthetic
Whites-Eco
Delicate
Delicate
Wool
e
Whites
Rapid
Wool
Rapid
-
Whites
-
Whites-Eco
(Programme)
also be used.
1. Program
?
2. Initial Program
?
When the Power button is
pushed,
?
So, if you
-
washing cycle
selecting
program, just push Start/Pause button
and then the washer will proceed.
Initial program
Coloureds Program / Main wash /
Normal Rinse/800 rpm / 40˚C
Whites
the
pushed,
automatically
By turning the Program dial, the program is
selected in orders of "Coloureds U
Synthetic
want to advance into the
without
-
Coloureds program is
selected.
the
ready for Coloureds program.
And the other initial conditions as follows.
washer is
When Start/Pause button is
U
U
Delicate
Wool
U
U
Rapid
U
Whites-Eco".
Regarding to the laundry type for each program
Please refer to the page13.
2. Course
-
Whites
-
-
Whites-Eco
-
-
Coloureds
-
-
Synthetic
Delicate
Wool
Rapid
15
to
ow
H
use
washer
Child lock
Start/Pause
If you want to lock all the buttons to prevent
a child or infirm persons, this
1. Start
?
operation by
function
This Start/Pause button is used to start
wash
cycle
pause the
or
cycles.
?
If
temporary stop
push
?
of wash
cycle
be used.
can
1. Child lock
2. Pause
?
is
needed,
Child lock
can
be set
"Start/Pause" button.
After the pause button is pressed, the
power is turned off automatically 4 minutes
Time Left
Wash
?
Wash
?
Pre Wash
By pressing
?
Rinse
When child lock is set, all buttons
To deactivate Child lock
and Rinse button
the Wash
can
-
Wash
-
be selected.
Main Wash
Time Left
Pre
+
1. Main Wash
2. Pre
If the
+
change the program when
is available for
lightly
laundry.
or
Child
together.
2. Press the Start/Pause button.
3.
Change the desired
program and press the
Start/Pause button.
Main Wash
laundry
Main Wash"
?
If you want to
lock is active,
1. Press and hold both Wash and Rinse
course
soiled
Rinse
Main Wash
?
normally
inoperable.
press and hold Wash
simultaneously again.
Wash
Main Wash
system,
are
button, the wash type
Main Wash
?
by pressing and holding the
simultaneously.
Wash button and Rinse button
later.
?
Rinse
Wash
Start/Pause
is
heavily soiled,
course
"Pre
Change
+
the desired
program
is effective.
Wash
Rinse
Start/Pa
Start/Pau
Pre Wash is available in
Whites,
Whites-Eco
Coloureds,
and Synthetic
If lamp
turns on,
selected.
16
?
The child lock
can
be set at any time and it is
automatically canceled when operational
program.
that function has been
occur.
errors
Also Child lock works when power is off.
ow
H
to
washer
use
Rinse
?
Rinse Hold
Time
By pressing
the Rinse
button, the Rinse type
Super
can
Normal
-
-
-
-
Rinse
Time
be selected.
+
1. Time
-
-
Turn
?
How to set "Time
-
?
Use the
Super
rinse time.
-
rinse when additional
rinsing is desired to remove
and detergent soiled loads.
excess
the water
tap.
laundry and close the door.
Place the detergent and fabric softener
-
more
on
Load
in
the drawer.
2. Super
1
"Time
Delay"
Rapid / Wool / Delicate performs 2 Rinses
+
Delay
Preparing washing before starting
performs 3 Rinses
Normal
Delay
Rinse Hold
Super + Rinse Hold
Coloureds / Whites / Whites-Eco / Synthetic
?
Time
Time Left
Super
Normal
-
?
Delay
Time Left
Normal
1. Normal
?
Delay
Delay"
Push Power button.
Turn the
Programme
dial to select
the program you require.
Push Time Delay button and set the
desired time.
dirt
-
Push the Start/Pause button.
(":" blinks.)
3. Rinse Hold
?
?
If you desire to leave fabrics in the
machine without spinning after rinse to
by pressing
the
spin, press the Rinse button
Start/Pause button to turn off the rinse
hours.
?
To drain and
or
hold
?
turns on,
Each
pushing of the
delay by one hour.
To cancel the time
button advances time
delay, push
the Power
button.
lamp.
If lamp
Delay button is pushed, "3:00" is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
prevent them from getting wrinkled, you
may select rinse hold
Rinse button.
If Time
that function has been
?
selected.
Time
present
or
?
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
is
to the
selected
According to
the condition
temperature, the
washing time
delayed
of water supply and
time and the actual
may vary.
17
ow
H
to
use
washer
2. No spin
Spin
1000
1200
1400
800
1000
1000
?
If no spin is selected,
draining water.
600
800
800
If lamp
400
400
400
selected.
No
No
Spin
No
Spin
the washer
stops after
that function has been
turns on,
Spin
Water Temp.
Spin
Spin
Spin
[WD-1060F(H)D]
?
[WD-1260F(H)D/ [WD-1460F(H)D/
1265F(H)D]
1465F(H)D]
By pushing the Spin button, the spin rpm
can
[WD-1260F(H)D/
1265F(H)D]
No Spin
40
-
No
-
400
-
400
-
400
-
600
-
800
-
800
-
800
-
1000
-
1000
-
1000
-
1200
-
1400
Spin
-
-
Cold
according
to the
No
(1200)U (1400)U
SpinU
400U
(600)
-
-
Whites/Whites-Eco
800U 1000U
(1200)U (1400)U
No
SpinU
400U
(600)
-
-
Rapid
800U 1000U
(1200)U (1400)U
No
SpinU
400U
(600)
-
-
Synthetic
800U 1000U No
-
SpinU
400U
Delicate
400U No SpinU 600U 800
400U No SpinU 800
(600)
[WD-1060F(H)D]
[WD-1260F(H)D/1265F(H)D/1460F(H)D/1465F(H)D]
-
Wool
400U No
18
SpinU (600)U
800U 1000
Water
temperature
below
Coloureds
800U 1000U
-30˚C/40˚C/60˚C/95˚C
1. Water Temperature
-
-
Cold
Temp.
?
rpm is available
program as follows.
Spin
Temp
-
1. Spin selection
?
the
selected.
30
[WD-1460F(H)D/
1465F(H)D]
No Spin
By pushing
button, the water
temperature can be
60
be chosen.
[WD-1060F(H)D]
?
95˚C
according
can
be selected
Coloureds &
Synthetic
40˚C
60˚C
U
Cold
Whites
95˚C U 40˚C
U
60˚C
U
as
to the program.
U
30˚C
Whites-Eco
60˚C U 40˚C
& Wool & Delicate
Rapid
Cold
U
Selected
For the
30˚C
U
40˚C
temperature's lamp
more
to the page13.
detailed
turns
on.
information, please refer
H
ow
to
washer
use
3. Completion of
Display
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
"
Time Left
1. Special function
?
When child lock is selected, the
is displayed.
"
"
?
display
delay is selected, it shows
remaining times to finish the selected
4. Time left
?
When time
the
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
-
-
diagnose display
-
?
If the washer has
a
trouble, the trouble
-
type is displayed.
"
"
"
"
Sensing
:
Problem of
:
Door is not closed
:
Over load in motor
:
Over load in motor
:
Water inlet trouble
:
Drainage
:
Imbalance trouble
:
Water temperature trouble
"
"
"
"
"
"
"
"
"
"
"
"
"
"
-
:
water pressure error
overfilling
-
water
-
?
to the
guide.
:
around 1 hour and 59 minutes
Synthetic
:
around 1 hour and 32 minutes
Delicate
:
around 1 hour and 5 minutes
Wool
:
around 55 minutes
Rapid
:
around 54 minutes
Whites
:
around 2 hours and 42 minutes
Whites-Eco : around 2 hours and 58 minutes
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
conditions.
trouble
error letters are displayed, please refer
troubleshooting page23 and follow the
Coloureds
amount of
?
If this
by
manufacturer.
program.
2. Self
washing
If the imbalance is detected
or
if the
suds
removing program works, the
wash time shall be longer.
(Max. increasing time is 45minutes.)
19
M
aintenance
Before
cleaning the washer interior, unplug the electrical
power cord to avoid electrical
shock to avoid electrical shock hazards.
!
The water inlet filter
"
-"
error
detergent
-
message will blink
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It is
clogged.
therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
!
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain it
using
1.
Open the lower cover
cap( )byusing
2.
left in the
smooth
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever may have
Be careful when
objects
ensure
stopped
it up.
if the water is hot.
draining
Unplug the drain plug ( ),
allowing the water to flow out.
3. Take out any
At
foreign material
( ). After
cleaning, turn the pump filter ( )
from the pump filter
coin. Turn the drain
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
use a
flowing
remove
vessel to
on
prevent
to the floor. If the
( )
open to the left.
clockwise and insert the drain
)to the original place.
cover
100
3
1
3
20
2
2
cap.
aintenance
M
!
Dispenser
After
a
while
drawer
detergents
and fabric softeners leave
deposit
It should be cleaned from time to time with
?
If necessary it can be removed completely from the machine
downward and by pulling it out.
?
To facilitate
cleaning,
the upper
a
jet
of
a
?
running
in the drawer.
water.
by pressing
part of the fabric softener compartment
the catch
can
be removed.
max
max
!
The drawer
Detergent can
be cleaned
?
also accumulate inside the
occasionally
Once you have finished
rinse
!
?
recess
cycle
The
without
washing
with
an
recess
which should
old toothbrush.
cleaning, replace
the drawer and
run a
laundry.
drum
If you live in a hard water area, limescale
and it is not easily removed.
Over time the build up of scale
have to be replaced.
continuously
clogs appliances,
builds up in
and if it is not
places where
kept
in check these will
?
Although the washing drum is made of Stainless steel, specks of rust can
articles (paper clips, safety pins) which have been left in the drum.
?
The
?
If you
washing
use
it cannot be
be caused
seen
eventually
by
small metal
drum should be cleaned from time to time.
descaling agents, dyes
or
bleaches, make
sure
they
are
suitable for
washing
machine
use.
Descaler could contain
components that
Remove the
a
Never
use
spots with
stainless steel
can
attack
part of your washing machine.
cleaning agent.
steel wool.
21
aintenance
M
!
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
Immediately wipe
Try
warm
off any
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
damp cloth.
sharp objects.
use
methylated spirit,
diluents
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket
always be clean to ensure a water tight seal.
Run washer
through
a
complete cycle using
Repeat
process if necessary.
NOTE
Remove hard water
!
Winterizing
winterizing
1. Turn off water
3.
an area
where
instructions to
should
cleaners labeled
as
washer safe.
freezing
can occur or
prevent damage
moved in
freezing temperatures,
to the washer:
supply tap.
electrical cord into
Plug
areas
hot water.
deposits using only
2. Disconnect hoses from water
4. Add
These
glass.
instructions
If the washer is stored in
follow these
and door
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze to
empty wash drum. Close
door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
Replace
22
a
cord, dry drum interior, and close door.
dispenser drawer.
remove
through
expelled.
Drain any water in
compartments and dry compartments.
drawer.
8. Store washer in
9. To
for 1minute to drain out all water.
an
uprignt position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
T roubleshooting guide
This washing machine is
equipped with automatic safety functions which detect and diagnose faults at an
appropriately
When the machine does not function properly or does not function at all, check the following points before
you call the Service Department.
early stage and
react
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop washer and
check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service.
Thumping
sound
?
Heavy wash loads may produce
thumping sound. This is usually
If sound continues, washer is
probably out of balance. Stop and
normal.
redistribute wash load.
a
Vibrating
noise
?
Have all the transit bolts and
packing
?
Are all the feet
the
If not removed
been removed?
resting firmly
during
installation. See Installation for
on
transit bolts.
removing
Wash load
ground?
in drum.
unevenly distributed
Stop washer and
rearrange wash load.
Water leaks.
?
Fill hose connection is loose at
tap
?
or
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
Oversudsing
detergent?
can cause
Water does not enter
washer
or
?
supply
it not
adequate
in
or
unsuitable
The formation of foam
water leaks.
Check another
tap in the house.
area.
it enters
slowly
Water
detergent
?
Water
?
Water inlet hose
?
The filter of the inlet hose
supply tap
completely open.
is not
are
Fully
kinked.
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
Clean and
straighten
the drain hose.
or
clogged.
Clean the drain filter.
23
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug
sure
fits
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace
capacity.
or
fuse.
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer won't
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
24
removing
T roubleshooting guide
Possible Cause
Symptom
?
Water
?
Water
?
?
Solution
supply it not adequate in area
supply taps are not completely
open.
Water inlet hose
are
Fully open tap.
Straighten hose.
Check the filter of the inlet hose.
kinked.
The filter of the inlet hose
Check another tap in the house.
clogged.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
appliance
or clogged.
clogged.
has
an
imbalance
detection and correction
system.
individual
are
heavy
articles
If
or
straighten
the drain hose.
2 similar items to
Rearrange
spinning
help
load to allow proper
loaded
bath mat, both robe, etc. this
system
may stop spinning or even interrupt
the spin cycle altogether, if the
imbalance is too
great
even
after
several
?
spin starts.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and
repeat the spin cycle.
?
Is the door
Close the door.
opened?
If
"
"is not released, call for service.
Unplug the
power
plug
and call for
service.
?
If the water overfills due to the
water
"
?"
faulty
valve, you will get
"
display.
"is
sensor
displayed
Close the water tap.
Unplug the power
Call for service.
plug.
if the water level
malfunction.
?
Over load in motor.
?
Over load in motor.
25
M
26
emo
M
emo
27
P/No.: 3828ER3007J
Download PDF

advertising