LG | WD-1438RD | LG WD-1438RD Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD-1438RD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Features
Jumbo drum
LG's
jumbo
drum
machines. A
can
wash about 40%
bigger drum improves
More economical
more
the wash
load than conventional
washing
performance.
by Intelligent Wash System
System detects the amount of load and water temperature, and
then determines the optimum water level and washing time to minimize energy and
water consumption.
Intelligent
Wash
Child-Lock
The child-lock system is to be used for preventing children from
button to change the program during operation.
Low noise
pressing
any
speed control system
By sensing the amount of load and balance, it
the spinning noise level.
evenly
distributes load to minimize
Auto Restart
Auto Restart allows the program to restart all
It does from the stage where it stopped.
Direct Drive
by
itself in
of power failure.
System
The advanced Brushless DC motor rotates the drum
C
case
directly without
belt and
pulley.
ontents
Warnings....................................................................................3
Specifications.............................................................................5
Installation..................................................................................6
Care before
washing................................................................12
Adding detergent
.....................................................................13
Function ...................................................................................14
How to
use
washer ..................................................................15
Maintenance ............................................................................23
Troubleshooting guide
Terms of
2
Warranty
.............................................................26
...................................................................30
W arnings
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
precautions, including
the
injury
following:
store the washer where it will
ignite
exposed to the weather.
a
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
or
?
?
Keep the area underneath and around your
appliances free of combustible materials such
?
as
play
on,
?
?
with,
or
inside this
?
any other appliance.
Keep washer away from fire.
Do not leave the washer door open.
An open door could entice children to
the door or crawl inside the washer.
hang
on
?
?
The
?
Do not wash
moving. Wait
completely stopped.
laundry process
retardant of fabrics.
or
dry
can
Do not slam the washer door closed
or
try to
To minimize the
possibility of electric shock,
unplug this appliance from the power supply
or
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
The dryer part is intend only for drying textile
materials.
Never reach into washer while it is
until the drum has
a result, carefully follow the
garment manufacturer's wash and care
distribution
or
?
To avoid such
disconnect the washer at the household
etc.
Close supervision is necessary if this appliance
is used by or near children or infirm persons.
Do not allow them to
explode. Oil may remain in the tub after
cycle resulting in fire during drying. So,
force the door open when locked. This could
result in damage to the washer.
out.
lint, paper, rags, chemicals,
using
instructions.
published user-repair instructions
that you understand and have the skills to carry
?
or
whole
to persons when
do not load oiled clothes.
?
recommended in the user-maintenance
instructions
or
?
If the power is supplied from an extension cord
electrical portable outlet device, the
or an
reduce the flame
extension cord set
the electrical
portable
positioned so that it is not
subject to water splash or moisture.
If the washer has been exposed to water, call an
authorized service provider to avoid any risk of
or
outlet device must be
articles that have been
cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as
oil, paint, gasoline, degreasers, dry
cleaning solvents, kerosene, etc.) which may
wax,
?
fire
or
electric shock.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
?
?
If you don't have the proper
outlet, consult
an
electrician.
WARNING : Improper connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided
proper outlet installed by a qualified electrician.
with the
appliance
-
if it does not fit the
outlet, have
3
a
I
nstallation
To minimize the risk of fire in
?
a
tumble
dryer,
the
following
spotted or soaked with vegetable
placed in a tumble dryer.
Items that have been
or
should be observed:
cooking
oil constitute
a
fire
hazard and should not be
Oil-affected items
sources
Such
as
can
in
a
ignite spontaneously, especially when exposed
dryer. The items become warm, causing
tumble
to heat
an
oxidation
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can
become hot enough to catch fire. Piling, stacking or storing oil-affected items can
prevent heat from escaping and
so
create a fire hazard.
If it is unavoidable that fabrics that contain
vegetable or cooking oil or have been
products be placed in a tumble dryer they should first be
washed in hot water with extra detergent-this will reduce, but not eliminate, the
hazard. Washed in hot water with extra detergent-this will reduce, but not
eliminate, the hazard. The 'cool down' cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be removed from the tumble
dryer or piled or stacked while hot.
contaminated
?
?
by
hair
care
Items that have been previously cleaned in, washed in, soaked in or spotted with
petrol/gasoline, dry-cleaning solvents or other flammable or explosive substances
should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments include
acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and was removers.
Items
containing
foam rubber
foam) or similarly testured
dryer on a heat setting.
heated, produce fire by spontaneous combustion.
(also
known
as
rubber. like materials should not be dried in
Foam rubber materials can, when
?
Fabric softeners
a
latex
tumble
products should not be used in a tumble dryer to eliminate
electricity unless this practice is specifically recommended by the
the fabric softener or product.
or
similar
the effects of static
manufacturer of
?
Undergarments
dryer.
that contain metal reinforcements should not be
placed
Damage to the tumble dryer can result if metal reinforcements come
drying. When available a drying rack could be used for such items.
?
Plastic articles such
be
?
placed
in
a
as
tumble
shower caps
or
babies
waterproof napkin
loose
covers
a
tumble
during
should not
dryer.
Rubber-backed articles, clothes fitted with foam rubber pads,
rubber-coated tennis shoes should not be placed in a tumble
4
in
pillows, galoshes
dryer.
and
S pecifications
Coton
C
Eco
Delic
Name
Power
supply
:
Front
:
240V~,50Hz
600mm(W)×550mm(D)×850mm(H)
61kg
7kg(2100W)
4kg(1200W)
loading washing
Size
:
Weight
Wash capacity
Dry capacity
:
Max. Watt
:
2100W
Spin speed
:
No
Water
:
:
:
consumption
Permissible water pressure
The external hot water
:
machine
spin/400/600/800/1000/1200/1400
72ℓ(10.3ℓ/ kg )
:4.5~114PSI(30~800kPa)
supply MUST NOT exceed
Permissible cold water temperature
TT
t
:
70
deg C
4-25˚C
with the requirement by certification Type Test Mark.
protection required for connection to the water supply.
Appliance complies
No further backflow
The appearance and
specifications may
Specifications subject
to
be varied without notice to improve the units
change by
manufacturer.
Option
Hot/Cold(2EA)
quality.
Accessories
Inlet
hose(1EA)
:
Spanner
5
nstallation
I
or store where it will not be
exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance
Install
guarantee.
Transit bolts
The
?
appliance is fitted
with transit bolts to
prevent internal damage during transport.
and all transit bolts must
Packing
be removed before
using
the
washer.
When
sure
Washer
the base, be
the additional
unpacking
to
remove
packing support in the
of the base packing.
Removing
middle
Packing Support
Base
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
remove
(Packing support may not
be used depending on
models.)
Packing
the bolts
along
3. Take out the 4 bolts
along with the
bungs by slightly twisting the
bung. Keep the 4 bolts and the
rubber
spanner for future
with the rubber
use.
bungs.
?
If
they are not removed, it may cause
heavy vibration, noise and malfunction.
2. Unscrew the 4 bolts with
the spanner
6
supplied.
?
Whenever the
appliance is transported,
the transit bolts must be refitted.
4. Close the holes with the caps
supplied.
I
nstallation
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 25
mm
:
Must be within 1.5 meters of either side of
location of washer. Do not overload the outlet
with
Laundry
Tub
more
than
one
appliance.
Additional Clearance
approx.
2cm
For wall, door and floor
(10cm
: rear
Do not
place
/2cm:right
or
store
:
modeling is required.
side)
& left
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
Positioning
Install the washer on a flat hard floor.
Make sure that air circulation around the washer is not
?
?
?
?
?
Never try to correct any
washer.
unevenness
in the floor with
impeded by carpets,rug etc.
pieces of wood, cardboard or similar
materials under the
If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliances.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of
a
breakdown.
With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This appliance must be earthed
Green and
Yellow(Earth)
E
Brown(Live)
Blue(Neutral)
L
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
7
I
nstallation
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the manufacturer or its service agents
similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after use.
Connect the machine to an earthed socket in accordance with current wiring regulations.
The appliance must be positioned so that the plug is easily accessible.
2. If the
3.
4.
5.
?
?
?
or
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting
water
supply
hose
▶Water
supply pressure
▶Don't strip
or
must
be between 30kPa and 800kPa
crossthread when
▶If the water supply pressure
is
connecting Inlet hose to the valve.
than 800kPa, a decompression
more
device should be installed.
?
Two rubber seals
are
?
?
?
in order to
are
supplied
prevent
with the water inlet hoses these
water leaks.
Check water tightness of washing machine connections by
turning the tap completely on.
Periodically check the condition of the hose and replace the
hose if necessary.
Make sure that there is
no
kink
on
the hose and that it is not
crushed.
▶When your washer has
Hose connector
?
?
Rubber seal
valve.
8
two
valves,
The Inlet hose which has red connector is for the hot water tap.
If the washer has two valves, the energy is saved by using hot
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
connector up till the
packing is
3.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Un tighten the upper
connector
screw.
one
touch type inlet hose
2. Push the upper connector up till
the rubber packing is in tight
contact with the
Upper
Rubber
Connector
Fixing
screw
tighten the
packing
Middle
Rubber
connector
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
3. Connect the
water
supply hose
to the middle connector,
tap. Then
pushing the plate down.
4 screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Water
Middle
remove
Guide
hose
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
Square tap
9
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
Turn off the
stopcock
if there is
especially
When disposing
if the machine is to be left for any length of time
floor drain(gully) in the immediate vicinity.
(e.g. holiday),
no
of the
appliance,
cut off the mains
cable, and destroy the Plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
a
risk
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
?
When
installing the drain hose to a sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage should the drain hose
secure
?
become loose.
?
?
?
The drain hose end should not be
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will protect
the floor from damage due to water leakage.
When the drain hose is too long, do not force
back into the washer. This will
cause
abnormal
noise, malfunction, and water leakage.
10
I
nstallation
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
in
appliance
a corner
of the
Timber
NOTE
or
on a
solid and level floor surface,
suspended type flooring
excessive vibration
or
load balance
may contribute to
errors.
2. If the floor is uneven,
adjust the adjustable
not insert
of wood etc. under the
feet
as required.
feet)
Make sure that all four feet are stable and resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base
of the washer. All lock nuts must be tightened.
(do
※
preferably
room.
pieces
In the
NOTE
case
platform,
that the
washing machine is installed
securely fastened in order
risk that it might fall off.
on a
raised
it must be
to eliminate the
Diagonal Check
When pushing down the edges of the washing machine top plate
diagonally, the machine should not move up and down at all.
(Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally,
adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
?
Position each foot
Tile floors
on a
be
clean, dry and level.
(Slippery floors)
on
sections and stick the
Tread Mate is
※
must
flat hard floor.
a
the Tread Mate and level the machine
pieces
on
to
the
dry tile where
(Cut Tread
to suit.
machine is
to
be
Mate into 70x70
self adhesive material used on ladders & steps that prevents
slipping.
Rubber
Wooden floors
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups
?
?
at
If
?
least 15mm thick under the
possible
washer, secured
install the washer in
one
of the
corners
※
Insert the rubber cups to reduce vibration.
※
Rubber cups
?
?
?
?
?
( p/no.
4620ER4002B
)
to at
can
be
under each
foot,
least 2 floor beams with
of the
room,
※
screws.
where the floor is
purchasedfrom
mm
placed.)
more
Cup
can be
purchased from
hardware suppliers.
It
stable.
the LG spare parts
department.
Important!
Proper placement and levelling of the washer ensures long, regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
It must not "Seesaw" across corners under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
11
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C, add
clothing.
a
without
This will
remove
a
half load of
detergent)
allow the unit to wash
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
a care
2.
on your clothes. This will tell you about the fabric content of your
it should be washed.
label
garment and how
Sorting
To
get the best results, Sort clothes into loads that
can
be washed with the
same
wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
3.
causing discoloration of white
lightly soiled one.
can occur
soiled items with
Color
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Separate
Separate
Lint
Wash lint
Caring
before
etc. If
possible, do
clothes
according
not wash
heavily
to amount of soil.
white fabrics from colored fabrics.
producers and
separately.
lint collectors
loading
large and small items in a load. Load large items first. Large items should not be
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
Combine
more
?
Check all pockets to make sure that they are
empty. Items such as nails, hair clip, matches,
pens, coins and keys can damage both your
washer and your clothes.
?
Close zippers, hooks and
strings
that these items don't snag
?
on
to make
sure
other clothes.
Do not be stuck between the door and the
glass.
?
Pre treat dirt and stains
detergent
collars and cuffs to
?
by brushing
little
help shift dirt.
If you wash underwear,
bag. if you don't use the
washing the underwear.
use
the wash cloth
wash cloth
Wires in the bra may make
12
a
dissolved in water onto stains like
a
noise.
bag
while
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
The
?
dosage
detergent should be used according to the
of the detergent manufactrurers.
instruction
If too much detergent
?
max
can occur
result
is used, too many suds
and this will decrease the washing
heavy load to
malfunction)
or cause
(Causing
a
If there are too many suds,
quantity must be reduced.
?
Use
?
the
the
motor.
detergent
specified Front loader washing powder
only.
?
Main wash
only
Detergent usage may need to be
adjusted for water temperature, water
?
?PreWash+MainWash
2.
hardness, size and soil level of the load.
For best results, avoid oversudsing.
Adding Fabric Softener
()
MAX
MAX
125 ml
125 ml
4. Water softener
?
A water
softener, such
used to cut down
on
as
the
Calgon can be
of detergent
use
in
?
extremely hard water areas. Dispense
according to the amount specified on the
packaging. First add detergent and then
Do not exceed the maximum fill line.
Overfilling
can cause
early dispensing
of the fabric softener which could stain
the water softener.
clothes.
?
?
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
?
2
days.
?
not
allowable.
NOTE
as
for soft
Full load
according
:
to
recommendation.
?
are
quantity of detergent
manufacturer's
The soap drawer can be partially
opened to add pre dissolved soap
Solvents(benzene, etc)
a
Tips
Softener will automatically be added
during the last rinse cycle.
powder during the initial fill.
?
Use
water.
?
Part load
?
Minimum load
:
3/4 of the normal amount.
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
at the
Do not pour fabric softener
on the clothes
directly
13
F
unction
Recommended
Fabric
Program
according
courses
First check if
to the
Proper
Temp.
(Option)
Type
laundry
95˚C
(30°C, 40°C,
60°C-Eco)
(Cold, 40˚C)
30˚C
(Cold, 40˚C)
"Hand Wash" marked
delicate and wool laundry.
Cold
:
:
When
Intensive
4.0kg
80
3.0kg
52
2.0kg
50
2.0kg
44
4.0kg
30
Rinse +
30˚C
soiled.
Select the water
temperature
Always follow garment
when laundering.
Intensive
100
Rinse Hold
(30˚C)
Quick 30 Coloured fast laundary
Temperature
Rating
Dry
30˚C
Delicate laundry easily
damaged.
lightly
Rinse +
Pre Wash
(30˚C,60˚C)
Wool/Silk Machine washable woolens
with pure new wool only.
Water
137
40˚C
Synthetic Polyamide, Acrylic,
Polyester.
which is
Rating
Rinse Hold
60˚C
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton(underwear...)
Hand
Wash
in
Minutes
Intensive
Colour fast gaments
Delicate
Load
linen towel
(white cotton,
and sheets...)
Time
Maximum
Option
is
machine washable.
Cotton
laundry type
to the wash
manufacture's
cycles.
care
washing full load or heavily soiled laundry,
by choosing intensive option.
you
label
can
or
instructions
increase
effectiveness
Program setting
with "Intensive"
option
for test in accordance
or
in
conformity
with
AS/NZS 2442.2.
Pre Wash
:
If the
laundry
is
heavily soiled,
"Pre Wash" Cotton is recommended.
Pre Wash is available in Cotton, Cotton-Eco and
14
Synthetic Program.
H
ow
1. Cotton
to
use
washer
selected upon power
?
?
?
2. Manual
automatically
Press the
Power(
) button
Press the
Start/Pause(
to start.
) button.
?
?
-
-
-
-
Wash
:
main wash
Rinse
:
2 times
Power(
) button
to start.
Select the conditions which you want to
by turning the program dial and
pressing
each button.
For
selecting the each conditions, please
refer to the page16~page22
Spin : 1400 rpm
Water temperature
Press the
use,
Initial conditions
-
Selecting
on.
?
:
60˚C
Press the
Start/Pause(
) button.
Program : Cotton
15
ow
H
(1)
(2)
(3)
(4)
Dial
:
to
use
washer
Program
Button
Button
:
Button
:
:
Start / Pause
Intensive
Rinse Hold
(5)
(6)
(7)
(8)
Button
:
Rinse +
Button
Button
:
Pre Wash
:
Dry
Button
:
Child Lock
(9) Button : Power
(10) Button : Spin
(11) Button : Time Delay
Power
Start/Pause
1. Start
?
1. Power
This Start/Pause button is used to start
wash
cycle
or
pause the wash
?
Press the Power button to turn power
on
and off
cycle.
?
To cancel the Time
Delay function,
pressed.
the
power button should be
2. Pause
?
?
?
2. Initial Program
If
temporary stop of wash cycle is
needed, press the Start/Pause button.
?
or
at the end of the wash
pressed,
ready
follows.
?
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
-
16
the
for Cotton program.
And the other initial conditions as
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
When the Power button is
washer is
Cotton
Program
/ Main wash /
Normal Rinse / 1400 rpm / 60˚C
H
ow
to
use
washer
Option
4. Pre Wash
?
If the
laundry
"Pre Wash"
?
?
the
By pressing
all
Option button,
Option
Intensive
-
Rinse Hold
-
-
Rinse +
-
?
1. Intensive
?
When you want to
washing full load or heavily soiled
laundry, you can increase effectiveness by
choosing intensive option.
the Intensive
time may be extended,
program selected.
option, the wash
depending on the
?
Please note that the
drying capacity is
Kg. Please remove excess clothes from
the completed wash before commencing
the drying and ensure that the cold water
tap is left
1. Push
2. Push
Is selected
by pressing
the Rinse Hold
button this function leaves clothes in the
machine; suspended in the water after
rinse without
?
To
proceed
entering
into
to a Drain or
a
on.
Spin
4. Push
dry only
function after
Rinse hold, select Drain on the program
dial or press the Spin selector button to the
speed,
3. Push
use
Power(9) button
Dry (7) button and select dry
rpm(10) button and select 0 rpm
Start/Pause(2) button
spin.
a
desired
select this button.
4
How to
2. Rinse Hold
?
dry,
Available in Cotton, Cotton-Eco and
Synthetic.
When
By selecting
Dry
Pre Wash
?
?
is effective.
Pre Wash is available in Cotton and
5.
Dry
heavily soiled,
Synthetic.
functions may be selected.
-
is
course
The
required lamp
will
light
up for
identification.
then press the Start/Pause
button.
3. Rinse+
?
For additional rinse which may assist in
traces of detergent residue.
removing
?
Rinse + function, the rinse
time and the rinse water are increased.
By selecting
17
ow
H
to
use
washer
Water Temp.
Spin
?
By pressing the Spin button, the spin
speed can be chosen and the LED of
is turned
rpm
on.
?
the
By turning
temperature
-
Program Dial,
can
the water
be selected.
Cold
-30˚C/40˚C/60˚C/95˚C
?
Spin only:
1. Press the Power button.
2. Set the desired
the
Spin
spin speed by pressing
button.
3. Press the Start/Pause button.
1. Spin selection
?
is available
Spin Speed
the program
as
according
to
follows.
Cotton, Rinse+Spin, Quick 30
-
NoSpin-400-600800
-
1000
-
1200- 1400
Synthetic, Wool/Silk, Hand Wash
NoSpin-400-600-800-1000
-
Delicate
-
NoSpin-400-600-800
2. No spin
?
If
no
after
18
spin is selected,
draining water.
the washer stops
Water temperature can be selected
according to the program.
The required temperature lamp
for identification.
For the
more
refer to
the
detailed
page14.
will
light up
information, please
H
ow
to
use
washer
Child Lock
Dry
If you choose to lock
the buttons on the
control
assembly
NOTE
model is
to
use
prevent tampering this
Child Lock
can
be set
the
4kg.
When
indicator behind the door
function may be
selected.
?
drying capacity for this
loading, please
maximum drying capacity
The maximum
as
shown
below.
by pressing
the
Rinse + button and Pre Wash button
simultaneously. (About
three
seconds)
?
Do not overload above the
maximum
?
?
When child lock is set, all buttons
are
locked
drying capacity
indicator. Items must be able to
except for power button.
To deactivate Child Lock system, press
Rinse + and Pre Wash buttons
tumble
?
simultaneously again. (About three seconds)
?
freely.
washer-dryer's automatic
process from washing to drying
can be selected easily.
For most even drying make
This
,
sure
all articles in the clothes
load
are
similar in material and
thickness.
?
?
To
change
to the desired program, whilst
1. Press both Rinse
once
and Pre Wash
remove
cycle,
?
together
By pressing
the DRY button, you
can
select
again. (About three seconds)
2. Press the Start/Pause button.
Normal
3. Select the desired program and press the
Start/Pause button
again.
Low
Temp.
The child lock can be set at any time and
it is automatically canceled when
operational errors occur. Also Child Lock
works when power is off.
Time
More
Less
"
?
?
load before
remember to
press the Start/Pause button.
in child lock mode.
+
If you open door and
has finished its
dryer
"
After the end of dry,
is displayed.
By pressing the "Start/Pause" button the
program can be ended. If you not press
the "Start/Pause" button, the program is
ended after about 4 hours.
"
"
Cooling Cycle.
19
H
ow
to
use
washer
Dry
1.Drying
?
Automatic
Use your Automatic
loads.
Electronic
Cycles
guide
to
sensors measures
dry
2.Drying
most
the
By press the
selected.
?
control.
?
Recommend Automatic
clothes type.
a) For Synthetics select
b)
c)
d)
drying
-
Low
course
for
Temp.
If you want to iron clothes-Less.
For Cottons select Normal
nappies
select
-
More
-
the
drying
time
can
NOTE: The estimated
drying time varies
drying time with an
Automatic. The type of fabric, size of the
load, and the dryness selected, do affect the
drying times.
-
from the actual
The standard
laundry weight which shows
laundry to put into the washer.
-
dry woolen articles. Pull them
original shape and dry them flat.
Do not tumble
their
how much
Dry button,
be
Woolen Articles
-
For washable
guide
Drying course can last up to 150min. When
selecting drying only, drying course will start
after spinning.
(The spinning time is about 19~22min.)
These drying times are given as a guide to help
you set your dryer for manual drying. Drying
times can vary greatly depending on dampness,
room temperature and type of fabric and your
own experience will be your best guide.
?
temperature of the exhaust to increase or
decrease drying temperatures for faster
reaction time and tighter temperature
?
time
Some
woven and loop knit materials may shrinks,
by varying amounts, depending on their quality.
Always stretch them
out
immediately after drying.
Permanent Press and
Do not overload your
-
Synthetics
dryer
Take out permanent press articles
dryer stops to reduce wrinkles.
-
to
as soon as
the
Fiber
Sorts of
laundry
Diaper
Single
weight
Shirt
Shortsleeved
Baby
200g
Leather Materials
clothes and
Night
Gowns
Always check the manufacture's instructions.
-
100g
or
Always check the manufacture's instructions.
-
300g
Rubber and Plastics
Sorts of
Do not
-
laundry
Single
weight
rubber
Underwear
Nightclothes
Jean
50g
500g
1200g
or
containing
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
Fiber
-
glass
dry fiberglass articles in your dryer.
particles left in the dryer could be
picked up by your clothes the next time
you use the dryer and irri tate your skin.
Do not
Glass
20
dry any items made from
plastics, such as:
or
to
ow
H
use
washer
Time
3.Completion of Drying
?
?
?
drying cycle is completed,
[Cool Down] is displayed on the Multi
display.
The Cool Down is setting automatically
when a drying cycle is complete.
"
1. Time
When you are not remove a loaf of clothes
from the dryer as soon as it stops, wrinkles
can
?
"
When
operating periodically
-
tumbles, rearranges and fluffs the load to
-
avoid wrinkles without heat for up to 4
hours.
?
message will continue to
until the clothes are removed or the
The
Start/Pause button is
Delay
Preparing washing before starting
"Time Delay"
Turn on the water tap.
form.
The Cool Down
Delay
-
Load
laundry and close the door.
detergent and fabric softener
Place the
in the drawer.
display
?
How to set "Time
pressed.
-
Program
-
Delay"
Press Power button.
-
Turn the
Program
dial to select
the program you require.
Press Time Delay button and set the
desired time.
Press the Start/Pause button.
-
(":" blinks.)
?
If Time
Delay button is pressed, "3:00"
displayed. The maximum delayed time
is
is 19 hours and the minimum time is
3 hours.
?
Each
on
?
?
8 programs
are
available
according
Lamp
will
light
to the
?
up to indicate selected
-
By turning
the
pressed, the
automatically selected.
Program dial,
?
Cotton
Drain
For
-
-
Delicate
-
delay,
press the
is
to the
According to
the condition
of water supply
and temperature, the delayed time and the
actual washing time may vary.
the program is
selected in order of
"
hour.
'expected time' from the
completion of washing
selected process (Wash, Rinse,
Delay
cycle or
Spin).
When Start/Pause button is
Cotton program is
Time
present
program.
?
To cancel the time
button advances
Power button.
laundry type.
?
pressing of the
delay by one
time
Quick 30 Rinse+Spin
Wool/Silk Synthetic".
Hand Wash
-
-
-
-
information regarding laundry type for each
please refer to page 14.
program,
21
H
washer
ow to use
Display
3.
?
Completion of washing
When
washing cycle is completed,
is displayed.
"
"
1.
?
Special function display
When child lock is selected, the
is displayed.
?
?
"
"
?
4. Time left
After the end of
dry,
"
"
is
displayed.
?
During washing cycle, the remaining
washing time is displayed.
Recommended program
When time
the
delay is selected, it shows
remaining time to finish the selected
-
-
2. Self
-
operation,
displayed.
a
fault
during
the associated fault will be
-
:
Water pressure
:
Problem of
:
Door is not closed
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
Water temperature trouble
:
Over load in motor
:
Over load in motor
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
:
Dry
sensing
overfilling
error
-
-
-
trouble
heater
or
Cotton
(60˚C)
:
thermostat
If these error letters are displayed, please
refer to the troubleshooting page28 and
follow the guide.
Synthetic (40°C)
:
Delicate
(30°C)
Wool/Silk
around 52 minutes
:
(30°C)
Hand Wash
around 50 minutes
:
(Cold)
:
around 44 minutes
water
trouble.
22
:
around 1 hour and 20 minutes
-
"
(95˚C)
around 1 hour and 40 minutes
diagnosis display
If the machine encounters
"
Cotton
around 2 hours and 17 minutes
program.
?
by
manufacturer.
-
?
Quick 30
(30°C)
:
around 30 minutes
around 21 minutes
Rinse+
Spin
Drain
around 1 minute
:
:
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
amount of
conditions.
?
If
an
unbalanced load is detected
the suds
or
if
removing program operates,
the wash time may be extended.
(Max. increasing time is 45 minutes.)
M
aintenance
Before
the electrical power cord to avoid electrical
cleaning the washer interior, unplug
shock to avoid electrical shock hazards.
When
of the appliance, cut off the mains cable, and destroy the plug Disable the
prevent young children being trapped inside.
disposing
door lock to
The water inlet filter
"
-"
error
detergent
-
message will blink
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
regularly
CAUTION
that the filter is clean to
laundry.
running of your machine.
using "Drain" program and
or foreign objects.
tangled
careful when draining if the water is hot.
Be
or
opening
Open the lower cover
cap ( ) by using a
coin. Drain plug ( )
to pull out the hose.
then open the pump filter to
threads
Allow the water to cool down before
1.
left in the
smooth
First drain the water
remove
emptying
objects
ensure
the door in
2.
an
cleaning
the drain pump,
water
use a
flowing
out emergency
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
this time
carrying
3. Remove any
At
vessel to prevent
on
to the floor. When
foreign
from the pump filter
cleaning,
( )
clockwise and insert the drain
)to the original place.
plug (
the pump filter
close the lower
open to the left.
After
turn the pump filter
water does not flow any more, turn
( )
material
( ).
cover
cap.
100
3
1
2
3
2
23
aintenance
M
Dispenser drawer
After
?
?
?
a
while
and fabric softeners leave
detergents
It should be cleaned from time to time with
a
a
deposit
jet of running
water.
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
an
washing
recess
which should
old toothbrush.
Once you have finished cleaning,
rinse cycle without laundry.
The
?
also accumulate inside the
occasionally with
be cleaned
?
recess
replace
the drawer and
run a
drum
If you live in a hard water area, lime scale may
and thus not easily removed.
continuously
build up in
places
where it cannot be
seen
Over time the build up of scale clogs
maintenance or repairs may result.
?
?
?
appliances,
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
Although
the
washing
If you
use
descalling agents, dyes
or
bleaches, make
sure
kept
in check,
of rust
can
expensive
be caused
they
are
suitable for
washing
use.
Descaler may contain chemicals that may
Remove any spots with
Never
24
use
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
by
small
the drum.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Run washer
Repeat
through
a
complete cycle using hot
water.
process if necessary.
Keep the washer door opening, flexible gasket and the door glass dry
Dry around the washer door opening, clean the glass, flexible gasket and door glass,
clean the circulation nozzle upper the gasket with the pin or stick.
NOTE
Remove hard water
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
freezing
may
temperatures, follow these instructions to prevent
1. Turn off water
3.
Plug
damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
4. Add
occur or
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
the drum interior, and close the door.
dry
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
up
water from the
compartments.
right position.
antifreeze from washer after storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
25
T roubleshooting guide
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately.
When the machine does not function properly or does not function at all, check the following points before
you contact your service
provider.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
If not removed
been removed?
Are all the feet
the
out of balance.
Stop
and
redistribute wash load.
Have all the transit bolts and
packing
If sound continues, washer is
probably
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
?
Over
There is
Clean the
the
the
something between
gasket and the glass.
sudsing
Water does not enter
washer
slowly
or
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
leaks, and vibration during spin.
?
it enters
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
Fully
is not
hose(s)
are
The filter of the inlet
clogged.
26
gasket and
glass with the towel.
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
T roubleshooting guide
Possible Cause
Symptom
Water in the washer
does not drain
drains
or
?
?
slowly.
Washer does not start
?
Drain hose is kinked
The drain filter is
or
Solution
clogged.
clogged.
Clean and
straighten
the drain hose.
Clean the drain filter.
Electrical power cord may not be
in or connection may be
plugged
Make
plug
sure
fits
tightly in wall
outlet.
loose.
?
House fuse blown, circuit breaker
a power outage has
tripped,or
Reset circuit breaker
Do not increase fuse
If
occurred.
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
Turn
on
by a qualified electrician.
water supply tap.
on.
Washer will not
Check that the door is
spin
firmly
shut.
Close the door and press the
Start/Pause button. After pressing the
Start/Pause button, it may take
few moments before the clothes
a
washer
begins to spin. The door must
spin can be achieved.
lock before
Once started, the door
Door does not open
can
not be
opened for safety reasons.
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Display
on
stuck
6min left.
Check the
of clothes.
the condition of the clothes at
The
clothes
6min left to evaluate if
should be less then
This
or
washing
machine checks
they
not. If the clothes are
dry
not dry,
are
weight
weight of the
4kg.
washing machine will further
dry for 30min. The 6min display
the
will then continue to count down
after 30min.
27
T roubleshooting guide
Possible Cause
Symptom
Wash
cycle
delayed
time
?
It takes time to balance the
laundry
before the
spin cycle
Solution
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
Stop the wash and pull out the
laundry then put it again to untwist
Dry problem
?
Does not
dry
Do not overload.
Check that the washer is
properly to
extract
draining
adequate water
from the load.
Clothes load is too small to tumble
property. Add
28
a
few towels.
T roubleshooting guide
Possible Cause
Symptom
?
?
?
?
Water
Water
Solution
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
Fully open tap.
Straighten hose(s).
kinked.
hose(s)
Check another tap in the house.
Check the filter of the inlet hose(s).
are
clogged.
?
?
?
?
?
Drain hose is kinked
Clean and
The drain filter is
Clean the drain filter.
or clogged.
clogged.
straighten the drain
Load is too small.
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
unbalance
an
detection and correction system. If
individual heavy articles are loaded
or
2 similar items to
hose.
help
load to allow proper
(ex.
etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
bath mat, both robe,
?
?
Is the door
not
opened
completely
or
Close the door
If
"
completely.
"is not released, call for service.
closed?
Unplug the
?
Water overfills due to the
faulty water
valve.
?
?
?
?
Water level
power
and call for service.
Close the water tap.
Unplug the power
Call for service.
sensor
plug
plug.
has malfunctioned.
Over load in motor.
Over load in motor.
Check water
supply.
Turn the tap on
If"
is not released,
plug and call service.
"
unplug
power
29
T
of Warranty
erms
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by factors
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
other than normal domestic
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
of
product
change
or
by pests for example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
on use
example
water drain
warming beeps.
the installation for
example, leveling
the
product, adjustment of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
pump and inlet hose filter for
?
?
?
Replace fuses
Incidental
possible
?
If this
or
the owner's manual.
example, grit, nails,
in or correct house
Correction of unauthorized
by
/ substances from the machine,
wiring
or
including
the
bra wires, buttons etc.
correct house
plumbing.
repairs.
consequential damage to personal property
appliance.
caused
by
defects with this
product
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
30
a
P/No.: MFL30138406
Download PDF

advertising