LG | WD-8016F | LG WD-8016F Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD-1016F
WD-8016F
WD-6516F
Thank you for
LG
Fully
buying a
Washing
Automatic
machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
40%
Jumbo drum
LG's
jumbo
drum
conventional
can
washing
wash about 40%
machines. A
more
bigger
load than
drum
improves
the wash
performance.
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
washing
time to minimize energy and water
water level and
consumption.
Child-Lock
The Child-Lock system has been used to prevent children from
pressing any button to change the program during operation.
Low noise
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
C
evenly
distributes
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
W arnings
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
or injury
precautions, including the following:
store the washer where it will
?
exposed to the weather.
recommended in the user-maintenance
?
?
published user-repair instructions
or
garment manufacturer's wash and
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
?
on,
with,
Do not slam the washer door closed
or
try to
?
inside
To minimize the
possibility of electric shock,
unplug this appliance from the power supply
or
disconnect the washer at the household
distribution
Do not leave the washer door open.
An open door could entice children to
or
or
care
force the door open when locked. This could
result in damage to the washer.
as
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this appliance
is used by or near children.
the door
?
?
out.
play
this or any other appliance.
?
dry articles that have been
or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
that you understand and have the skills to carry
Do not allow children to
?
Do not wash
using
cleaned in, washed in, soaked in,
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
instructions
to persons when
hang
on
crawl inside the washer.
?
Never reach into washer while it is
moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
retardant of fabrics.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
S pecification
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
Drawer
or a
(For detergent and
fabric softener)
order to avoid
or
its service agents
person in
similarly qualified
a
hazard.
Control panel
Drum
Door
Lower
cover
Adjustable feet
Lower
Drain pump filter
Drain
cover
cap
plug
Name
Power
supply
Size
/ Max.Watt
:
Front
:
240V~,50Hz
:
600mm(W) 600mm(D) 850mm(H)
67kg / 2200W
7.5kg
No Spin/400/500/650[WD-6516F]
No Spin/400/600/800[WD-8016F]
No Spin/400/800/1000[WD-1016F]
79.7 (10.6 / kg)
0.3-10kgf/ cm2 (30-1000kPa)
Weight
Wash capacity
Spin speed
:
Water
:
:
:
consumption
Permissible water pressure
The external hot water
:
supply 60˚C
loading washing
machine
and must NOT be above 70˚C
Permissible cold water temperature : 4-25˚C
TT : Appliance co.y with the requirement by certification
Type Test Mark.
protection required for connection to the water supply.
The appearance and specifications may be varied without notice to raise the units quality.
No further backflow
Accessories
Spanner
4
nstallation
I
Install or store where it will not be
weather.
exposed
to
temperatures below freezing
or
exposed
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin, pay particular
are areas
attention to
to the
is installed
on a
which may be subject to infestation by cockroaches or other
keeping the appliance and its surroundings in clean condition at
all times.
Any damage which may
appliance guarantee.
be
cause
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
appliance is fitted
Removing
with transit bolts to
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
?
?
If
it may
removed,
they
vibration, noise and malfunction.
are
not
use.
bungs.
cause
heavy
Whenever the
appliance is transported, the
transit bolts must be refitted.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
I
nstallation
Installation place requirement
Level floor
Drain Hose
:
Allowable slope under entire washer is 1˚
Power outlet :
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
Washer
than
Laundry
appliance.
one
Additional Clearance :
For wall, door and floor modeling is
(10cm : rear /2cm:right & left side)
Tub
approx.
2cm
Do not place or store
washer at any times.
They
can
damage
required.
laundry products
the finish
or
on
top of
controls.
650
850
600
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not
identifying the terminals in your plug, proceed as follows:
correspond
with the coloured
markings
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
6
nstallation
I
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the manufacturer or its service agents
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after use.
Connect the machine to an earthed socket in accordance with current wiring regulations.
The appliance must be positioned so that the plug is easily accessible.
2. If the
3.
4.
5.
?
?
?
Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur.
Frozen hoses may burst under pressure. The reliability of the electronic control unit may be
impaired at temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
Washing Machine
is to be connected to the water mains
sets and that old hose-sets should not be used.
using
new
hose-
Connecting water supply hose
Water supply pressure must be between
30kPa and 1000kPa (0.3~10kgf/cm2)
Don't
strip
Inlet hose
If the
water
1000kPa,
a
crossthread when
the valve.
or
to
connecting
supply pressure is more than
decompression device should be
installed.
?
Two rubber seals
are
supplied
with the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the tap
completely
?
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
Hot water
?
tap
Cold
Cold
Hot(option)
Make sure that there is no kink
hose and that it is not crushed.
on
the
water
When your washer has
tap
?
?
two
valves,
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
connector up till the
packing is
3. Push the
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up till
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
(Single
3. Connect the
water
inlet
models)
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Water
Middle
remove
Guide
hose
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
of suffocation ! Keep all packaging well away from children
Turn off the
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
ca.
105
When
installing the drain hose sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
cm
?
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
max.
ca.
?
?
?
105
cm
min.60cm max.10cm
100cm
max.
100cm
min. 60cm
strap
min. 60cm
The drain hose should not be
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
I
nstallation
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
appliance on a solid and level
preferably in a corner of
floor surface,
the room.
2. If the floor is uneven,
adjust the
adjustable feet as required. (do not
insert pieces of wood etc. under the
Make
sure
that all four feet
are
feet)
stable
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
and
that the
a
level, tighten the lock
of the washer.
All lock nuts must be tightened.
After the
washer is
nuts up towards
of the base
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
all.
(Please,
move
check both
the
up and down at
of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
10
C
are
before
washing
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that
can
be washed with the
same
wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
3.
causing discoloration of white
lightly soiled one.
can occur
soiled items with
Color
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Separate
Separate
Lint
Wash lint
Caring
before
etc. If
possible, do
clothes
according
not wash
heavily
to amount of soil.
white fabrics from colored fabrics.
producers and
separately.
lint collectors
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all pockets to make sure
they are empty. Items such
that
as
nails, hair clip, matches, pens,
coins and
keys
can
damage
both
your washer and your clothes.
?
Close zippers, hooks and strings to
make sure that these items don't
snag
?
on
other clothes.
Pre treat dirt and stains
a
little
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
?
If too
much
detergent is
recommended amount,
occur
used more than the
many suds can
and this will decrease the washing result
too
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
?PreWash+MainWashU
2.
)
MAX
MAX
125 ml
125ml
can cause
Detergent usage may need to be adjusted
for water temperature, water hardness,
size and soil level of the load. For best
Full load
Do not leave the fabric softener in the
2
days.
Softener will automatically be added
during the last rinse cycle.
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the clothes
directly
12
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
clothes.
?
according
:
manufacturer's recommendation.
of the fabric softener which could stain
?
detergent only for the front
Tips
Do not exceed the maximum fill line.
Overfilling
a
washer.
Part load
?
(Causing
results, avoid oversudsing.
Adding Fabric Softener
(
motor.
at
F
unction
Recommended
according
courses
Fabric
to the
Maximum
Proper
Program
Energy
Option
Type
First check if
Load
Temp.
laundry
is machine
Time
in
in
kWh
Minutes
Pre Wash
95˚C
Time Save
washable.
Cotton
laundry type
Rinse+
(white cotton, linen
sheets...)
Rating
2.74
163
Rating
1.33
161
Less than
0.45
82
0.41
56
0.28
58
0.03
71
0.35
30
Crease Care
towel and
Color fast gaments
Pre Wash
(shirts, night dresses,
pajamas...)and lightly
soiled white
60˚C
Time Save
(Cold, 30˚C,
Rinse+
40˚C)
Crease Care
cotton(underwear...)
Synthetic Polyamide, Acryic,
Polyester
Delicate
Delicate
laundry
easily damaged
(silk, curtains...)
Wool
Machine washable
woolens with pure
new wool only
Hand
"Hand Wash" marked
Wash
delicate and wool
laundry
Colored
Quick 30
which is
Laundry
lightly soiled
fast.
Pre Wash
:
If the
Pre Wash
40˚C
(60˚C, Cold,
30˚C)
Time Save
Rinse+
Time Save
(40˚C, Cold)
Rinse+
30˚C
Time Save
(40˚C, Cold)
Rinse+
Cold(30˚C,
40˚C)
Time Save
laundry is heavily soiled, "Pre
Synthetic Program.
kg
Crease Care
30˚C
30˚C(40˚C,
Cold)
3.5
Rinse+
Less than
3.0
kg
Less than
2.0
kg
Less than
2.0
kg
Less than
Rinse+
2.0
kg
Wash" Cotton is recommended. Pre Wash is available in
Cotton and
Rinse+: Used to introduce
an
additional rinse, which may assist in
removing
traces of
detergent
residue.
13
H
ow
1. Cotton
to
use
washer
?
?
?
2. Manual
automatically
selected upon power
Press the
Power(
) button
Press the
Start/Pause(
to start.
) button.
?
?
Initial condition
-
Wash
:
main wash
-
Rinse
:
3 times
-
-
Program : Cotton
14
Power(
) button
to start.
Select the conditions which you want to
use, by pressing each button.
selecting the each conditions, please
refer to the page15~page20
Spin : 1000 rpm [WD-1016F]
800 rpm [WD-8016F]
650 rpm [WD-6516F]
Water temperature
Press the
For
?
-
Selecting
on.
:
60˚C
Press the
Start/Pause(
) button.
H
(1)
(2)
(3)
ow
to
use
washer
Button
:
Button
:
Power
Program
Button
:
Start/Pause
(4)
(5)
(6)
Button
:
Button
:
Button
:
(7) Child Lock
(8) Button : Temp.
(9) Button : Spin
Time
Delay
Option
Option
Option
2. Time Save
?
This
of
?
To
a
option
can
be used to reduce the time
wash program.
option press the Time Save
this
use
button
once
before the wash program is
started.
?
-
-
By pressing the Option button, all
Option functions may be selected.
Pre Wash
?
-
3. Rinse+
Rinse
+
If the
are
increased.
4. Crease Care
is effective.
?
Pre Wash is available in Cotton and
Synthetic.
The
By selecting Rinse+ function, the rinse time
and the rinse water
laundry is heavily soiled, "Pre Wash"
course
Used to additional rinse, which may assist in
traces of detergent residue.
removing
Crease Care
1. Pre Wash
?
not available with Quick 30
Time Save
?
?
option is
program.
?
-
This
required lamp
identification.
will
If you want to prevent creasing, select this
button with spin speed.
light up for
15
ow
H
to
use
washer
Spin
650
800
500
600
400
400
2. No spin
?
If
spin is selected, the washer stops after
draining water.
no
The
required lamp
identification.
[WD-6516F]
?
By pressing
can
[WD-8016F]
the
Spin
button, the
spin speed
be chosen.
Spin speed
program
?
as
is available
3. Rinse Hold
?
according
to the
follows.
?
Cotton/Synthetic/Wool/Hand Wash
Spin 400 500
650 Rinse Hold No
-
Delicate
500 Rinse Hold No
-
Quick 30
Spin
Cotton/Synthetic/Wool/Hand Wash
Spin 400 600
800 Rinse Hold No
-
Delicate
600 Rinse Hold No
-
Spin 400
Quick 30
400 600 800 Rinse Hold No
?
Spin
WD-1016F
-
-
Cotton/Synthetic/Wool/Hand Wash
1000 Rinse Hold No Spin 400 800
Delicate
800 Rinse Hold No
-
Spin 400
Quick 30
400 800 1000 Rinse Hold No
16
proceed through
to a drain or
Spin
in the
a
spin, once
completed.
Press the program button, than spin button
untill the required program is selected.
(Spin or Drain)
required lamp
identification.
WD-8016F
-
To
The
Spin 400
400 500 650 Rinse Hold No
?
Is selected by pressing the spin button
repeatedly this function leaves clothes
machine; suspended in the water after
rinse without entering into spin.
the rinse hold function is
WD-6516F
-
light up for
[WD-1016F]
1. Spin selection
?
will
will
light up for
ow
H
to
use
washer
Water Temp.
?
Child Lock
By pressing the Temp.
button, the water
temperature can be
If you choose to lock the buttons on the control
to prevent tampering this function
selected.
-
assembly
Cold
-30˚C/40˚C/60˚C/95˚C
may be selected.
1. Child Lock
?
-
by pressing and
holding
Option and the Temp.
button simultaneously.
can
be set
the the
1. Water Temperature
?
Child Lock
Water temperature can be selected
below according to the program.
as
Cotton
60˚C 95˚C Cold 30˚C 40˚C
-
Synthetic
40˚C 60˚C Cold 30˚C
-
?
Delicate & Wool & Quick 30
?
30˚C 40˚C Cold
-
Hand Wash
required temperature lamp
identification.
For the
more
detailed
are
inoperable
except power button.
To deactivate Child Lock system, press the
Option and the Temp. button simultaneously
again.
Cold 30˚C 40˚C
The
When child lock is set, all buttons
will
light up for
information, please refer
to the page13.
?
To
change
to the desired program, whilst
in child lock mode.
1. Press both the
together
once
Option
again.
and the
Temp.
2. Press the Start/Pause button.
3. Select the desired program and press
the Start/Pause button
again.
Change
the desired
program
?
The child lock
is
errors occur.
power is off.
be set at any time and it
canceled when operational
can
automatically
Also Child Lock works when
17
to
ow
H
use
Time
1. Time
washer
Delay
Program
Delay
Preparing washing before starting "Time
Delay"
Turn on the water tap.
-
-
-
Load
laundry and close the door.
Place the detergent and fabric softener
?
the drawer.
?
?
How to set "Time
-
-
-
are
available
according
to the
Lamp
will
light
up to indicate selected
program.
Delay"
Press Power button.
Press the
Program
button to select
1. Program
the program you require.
Press Time Delay button and set the
?
desired time.
-
8 programs
laundry type.
in
When Start/Pause button is
cotton program is
Press the Start/Pause button.
-
(":" blinks.)
pressed, the
automatically selected.
By turning the Program dial, the program is
"Cotton Synthetic
selected in order of
Delicate Wool Hand Wash Quick 30
?
If Time
pressed, "3:00" is
The
maximum
displayed.
delayed time is
Delay
button is
19:00 hours and the minimum time is 3:00
hours.
?
?
pressing of the button advances
delay by one hour.
Each
time
To cancel the time
on
delay, press the Power
button.
?
Time
?
time' from the
'expected
completion of washing cycle
selected process (Wash, Rinse, Spin).
Delay
present
or
is
to the
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time may vary.
18
Rinse+Spin Drain".
Regarding to the laundry type for each program
Please refer to the page13.
2. Course
-Cotton
-Wool
-Rinse+Spin
-Synthetic
-Hand Wash
-Drain
-Delicate
-Quick 30
ow
H
to
use
washer
Start/Pause
Power
1. Power
1. Start
?
This
Start/Pause( ) button is used
cycle or pause the wash cycle.
to start
?
2. Pause
?
?
?
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
at the end of the wash
on
2. Initial Program
If temporary stop of wash cycle is needed,
press the Start/Pause( ) button.
or
Press the Power button to turn power
and off
wash
cycle.
?
When the Power button is
pressed,
the
for Cotton program. And
the other initial conditions as follows.
?
washer is
ready
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause( )
button and then the washer will proceed.
Initial program
[WD-6516F]
-Cotton
Program/Main Wash
rpm/60˚C
Normal Rinse/650
[WD-8016F]
-Cotton
Program/Main Wash
rpm/60˚C
Normal Rinse/800
[WD-1016F]
-Cotton
Program/Main Wash
rpm/60˚C
Normal Rinse/1000
19
ow
H
to
use
washer
Display
4. Time left
?
?
1. Special function
During washing cycle, the remaining
washing time is displayed.
Recommended program
display
-
?
When child lock is selected, the
is displayed.
"
If the machine encounters
operation;
displayed
:
a
fault
the associated fault will be
"
"
-
"
"
"
"
"
"
"
"
"
"
a
fault
during
-
around 1 hour and
:
Delicate
:
around 56 minutes
Wool
:
around 58 minutes
Hand Wash
around 1 hour and
:
11 minutes
-
sensing
:
Problem of
:
Door is not closed
:
Water inlet trouble
overfilling
error
-
water
-
?
Drainage
:
Unbalanced load
:
around 30 minutes
Rinse+
Spin
Drain
around 1 minute
The
:
:
around 19 minutes
washing time may vary by the
laundry, water pressure,
water
temperature and other
washing
Water temperature trouble
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
Quick 30
amount of
trouble
:
:
Synthetic
the associated fault will be
Water pressure
:
around 2 hours and
22 minutes
If the machine encounters
"
:
41 minutes
-
"
Cotton 60˚C
during
diagnosis display
operation,
displayed.
around 2 hours and
43 minutes
-
2. Self
?
Cotton 95˚C
"
-
?
by
manufacturer.
?
If
an
conditions.
unbalanced load is detected
if the suds
removing
or
program
operates, the wash time may be
extended.
3. Completion of
?
When
washing
washing cycle is completed,
is displayed on the "Multi
display".
"
"
20
(Max. increasing
time is
45minutes.)
aintenance
M
Before
cleaning
the washer interior,
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
When
disposing
of the
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
-"
-
"error message will blink
If your water is very hard
or
on
the control
when water does not enter the
panel
contains traces of lime
deposit,
drawer.
detergent
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
First drain
filter is clean to
using
objects
ensure
left in the
smooth
laundry.
running of your
machine.
the drain and then open the pump filter to
remove
whatever
any threads or objects.
Be careful when draining if the water is hot.
Allow the water to cool down before
emptying
1.
or
opening
Open the lower cover
cap( )byusinga
2.
the door in
an
cleaning
the drain pump,
carrying
out emergency
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Remove any
At
foreign
from the pump filter
coin. Turn the drain
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
use a
flowing
vessel to prevent
on
to the floor. When
( )
open to the left.
cleaning,
material
( ).
After
turn the pump filter
(
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
3
2
2
21
)
aintenance
M
Dispenser drawer
After
?
?
?
a
while
and fabric softeners leave
detergents
It should be cleaned from time to time with
a
jet
of
a
deposit
running
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
water.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
?
with
occasionally
washing
?
?
recess
which should
old toothbrush.
replace
the drawer and
run a
drum
If you live in a hard water area, limescale may
seen and thus not easily removed.
Over time the build up of scale
be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
recess
also accumulate inside the
continuously
clogs appliances,
build up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
Although
the
washing
If you
use
descaling agents, dyes
or
bleaches, make
sure
they
kept
places where
in check these may have to
of rust
can
be caused
Remove any spots with
Never
22
use
steel wool.
a
stainless steel
damage part
are
of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler may contain chemicals that may
it cannot be
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
water.
Repeat process if necessary.
Remove hard water
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
T roubleshooting guide
This
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
out of balance.
If not removed
been removed?
Are all the feet
the
probably
Stop
and
redistribute wash load.
Have all the transit bolts and
packing
If sound continues, washer is
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
clogged.
are
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
?
drains
24
slowly.
Drain hose is kinked
or
clogged.
or
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
Turn
by a qualified electrician.
on water supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
25
T roubleshooting guide
Possible Cause
Symptom
?
?
?
?
?
?
?
?
?
Water
Water
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s) clogged.
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose.
Drain hose is kinked
Clean and
The drain filter is
Clean the drain filter.
or clogged.
clogged.
straighten the
Load is too small.
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
unbalance
detection and correction system. If
individual heavy articles are loaded
or
2 similar items to
load to allow proper
Is the door
opened?
Close the door.
If
"
"is not released, call for service.
Unplug the
power
plug
service.
Water overfills due to the
faulty water
valve.
?
26
help
bath mat, both robe,
?
?
drain hose.
etc.), this
system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and
repeat the spin cycle.
(ex.
?
Solution
Water level
Close the water tap.
Unplug the power
Call for service.
sensor
has malfunction.
plug.
and call for
T
of Warranty
erms
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by factors
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
other than normal domestic
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
by
of
product
pests for
or
change
example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
on use
example
water drain
warming beeps.
the installation for
example, levelling
the
product, adjustment of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
?
?
?
Replace fuses
wiring
or
correct house
product
plumbing.
caused
by
is used for commercial purpose, it is not warranted.
Public
(Example
places
center, dormitory)
:
the
repairs.
Incidental or consequential damage to personal property
possible defects with this appliance.
If this
including
example, grit, nails, bra wires, buttons etc.
in or correct house
Correction of unauthorized
the owner's manual.
/ substances from the machine,
pump and inlet hose filter for
?
by
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
a
27
P/No.: 3828ER3034C
Download PDF

advertising