LG | WD-8023FB | LG WD-8023FB Owner’s Manual

P/No.: 3828ER3029E
Washing
Machine
OWNER'S MANUAL
WD-8023FB
WD-1023FB
WD-1223FB
Thank you for
LG
Fully
buying a
Washing
Automatic
machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Jumbo drum
40%
LG's
jumbo
drum
conventional
can
washing
wash about 40%
machines. A
more
bigger
load than
drum
improves
the wash
performance.
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
washing
time to minimize energy and water
water level and
consumption.
Child-Lock
The Child-Lock system has been used to prevent children from
pressing any button to change the program during operation.
The power button will
activated.
Low noise
always
remain
operative
whilst Child-Lock is
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
W arnings
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
or injury
precautions, including the following:
store the washer where it will
?
exposed to the weather.
recommended in the user-maintenance
?
?
published user-repair instructions
or
garment manufacturer's wash and
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
?
on,
with,
Do not slam the washer door closed
or
try to
?
inside
To minimize the
possibility of electric shock,
unplug this appliance from the power supply
or
disconnect the washer at the household
distribution
Do not leave the washer door open.
An open door could entice children to
or
or
care
force the door open when locked. This could
result in damage to the washer.
as
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this appliance
is used by or near children.
the door
?
?
out.
play
this or any other appliance.
?
dry articles that have been
or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
that you understand and have the skills to carry
Do not allow children to
?
Do not wash
using
cleaned in, washed in, soaked in,
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
instructions
to persons when
hang
on
crawl inside the washer.
?
Never reach into washer while it is
moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
retardant of fabrics.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
S pecification
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
Drawer
or a
order to avoid
(For detergent and
fabric softener)
its service agents
person in
or
similarly qualified
a
hazard.
k
Control
panel
Drum
Door
Lower
cover
Adjustable
Drain pump filter
Drain
Lower
feet
cover
cap
plug
Name
Power
supply
:
Front
:
240V~,50Hz
600mm(W) 600mm(D) 850mm(H)
65kg / 2100W
7.5kg
No spin/400/500/600/800 [WD-8023FB]
No spin/400/600/800/1000 [WD-1023FB]
No spin/400/800/1000/1200 [ WD-1223FB]
74
(9.8 /kg) [WD-8023FB]
77
(10.3 /kg) [WD-1023FB]
71
(9.5 /kg) [WD-1223FB]
0.3-10kgf/ (30-1000kPa)
Size
:
Weight / Max.Watt
Wash capacity
Spin speed
:
Water
:
:
:
consumption
loading washing
machine
Permissible water pressure :
The external hot water supply 60˚C and must NOT be above 70˚C
Permissible cold water temperature : 4-25˚C
: Appliance co.y with the requirement by certification
TT
No further backflow
protection required for connection
The appearance and
specifications may
Type
Test Mark.
to the water
supply.
be varied without notice to raise the units
Accessories
Inlet hose 2EA
4
(Hot/Cold)
Spanner
quality.
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
is installed
on a
In countries where there are areas which may be subject to infestation by cockroaches or other
vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at
all times.
Any damage which may
appliance guarantee.
be
cause
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
?
appliance is fitted
Packing
removed before
When
with transit bolts to
prevent internal damage during transport.
and all transit bolts must be
using
the washer.
the base, be
the additional packing
unpacking
remove
support in
packing.
sure
Washer
to
Packing Support
the middle of the base
Base
Removing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
along
with the rubber
2. Unscrew the 4 bolts with
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
If they are not removed, it may cause heavy
vibration, noise and malfunction.
the spanner
Packing
?
Whenever the
appliance is transported, the
transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
I
nstallation
Installation place requirement
Drain Hose
Level floor
:
Allowable slope under entire washer is 1˚
Power outlet :
Must be within 1.5 meters of either side of location of washer. Do not
overload the outlet with more than one appliance.
Washer
Laundry
Tub
approx.
Additional Clearance
2cm
:
For wall, door and floor
modeling is required.
/2cm:right & left side)
Do not place or store laundry products on top
They can damage the finish or controls.
(10cm
: rear
of washer at any times.
Positioning
Install the washer
on a
flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
Before placing the washer on tiles, apply a rubber mat under the feet.
?
?
?
?
?
?
Never try to correct any
washer.
unevenness
in the floor with
pieces of wood,
cardboard
or
similar materials under the
If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of
a
breakdown.
With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This appliance must be earthed
Green and
Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
6
I
nstallation
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the manufacturer or its service agents
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after use.
Connect the machine to an earthed socket in accordance with current wiring regulations.
The appliance must be positioned so that the plug is easily accessible.
2. If the
3.
4.
5.
?
?
?
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
Washing Machine
is to be connected to the water mains
sets and that old hose-sets should not be used.
using
new
hose-
Connecting water supply hose
Water supply pressure must be between
30kPa and 1000kPa (0.3~10kgf/cm2)
Don't
strip
Inlet hose
If the
or
to
water
1000kPa,
a
crossthread when
connecting
the valve.
supply pressure is more than
decompression device should be
installed.
?
Two rubber seals
are
supplied
with the
water inlet hoses these are in order to
prevent
?
Hose connector
water leaks.
Check water tightness of washing
machine connections by turning the tap
completely
Rubber seal
?
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Hot water
tap
Make sure that there is no kink
hose and that it is not crushed.
on
the
Cold
Cold
Hot(option)
water
When your washer has
tap
?
?
two
valves,
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
connector up till the
packing is
3. Push the
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up till
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
(Single
3. Connect the
water
inlet
models)
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Water
Middle
remove
Guide
hose
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
Turn off the
of suffocation !
all
Keep
well away from children
packaging
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
When
installing the drain hose sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
ca.
105
cm
?
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
max.
ca.
?
?
?
105
cm
min.60cm max.10cm
100cm
max.
100cm
min. 60cm
strap
min. 60cm
The drain hose should not be
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
I
nstallation
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
appliance
of the
Timber
NOTE
on a
solid and level floor surface,
2. If the floor is uneven,
pieces
Make
sure
or
load balance
errors.
adjust the adjustable
feet)
feet
as
required. (do
not
of wood etc. under the
that all four feet
then check that the
After the
in
may contribute to
suspended type flooring
or
excessive vibration
insert
preferably
room.
washer is
stable and
are
appliance
level, tighten
is
perfectly
resting on the floor and
(use a spirit level)
level.
the lock nuts up towards
the washer. All lock nuts must be
of the
base
of
tightened.
Diagonal Check
When pushing down the edges of the washing machine top plate
diagonally, the machine should not move up and down at all. (Please,
check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust
the feet again.
Concrete
floors(tile...)
?
The installation surface
?
Install washer
?
Before
on a
placing
must
be
clean, dry and level.
flat hard floor.
the washer
on
tiles, apply a rubber mat under the feet.
Do not let the feet of the washer get wet. If feet of the washer get wet,
slipping
may
Wooden floors
?
?
?
occur.
Rubber
Cup
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
at least 15mm thick under the washer, secured to at least 2 floor beams with screws.
If possible install the washer in one of the corners of the room, where the floor is more stable.
Insert the rubber cups to reduce vibration.
You
can
obtain the rubber cups
(p/no.4620ER3001B) from
the LG spares
dept.
Important!
?
Proper placement and levelling of the washer ensure long,regular and reliable operation.
must be absolutely horizontal and stand firmly in position.
?
The washer
?
It must not "Seesaw"
?
The installation surface
10
across corners
must
under load.
be clean, free from floor wax and other lubricant coatings.
a
C
are
before
washing
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that
can
be washed with the
same
wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
3.
causing discoloration of white
lightly soiled one.
can occur
soiled items with
Color
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Separate
Separate
Lint
Wash lint
Caring
before
etc. If
possible, do
clothes
according
not wash
heavily
to amount of soil.
white fabrics from colored fabrics.
producers and
separately.
lint collectors
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all pockets to make sure
they are empty. Items such
that
as
nails, hair clip, matches, pens,
coins and
keys
can
damage
both
your washer and your clothes.
?
Close zippers, hooks and strings to
make sure that these items don't
snag
?
on
other clothes.
Pre treat dirt and stains
a
little
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
recommended amount,
occur
used more than the
many suds can
and this will decrease the washing result
too
heavy load to the
malfunction)
or cause
for
main wash
Detergent
()
Fabric
softener
for
pre wash
Main wash
only
?
()
U
?
?PreWash+MainWashU
2.
Use powder
)
MAX
MAX
125 ml
125ml
Detergent usage may need to be adjusted
for water temperature, water hardness,
size and soil level of the load. For best
Tips
Full load
can cause
clothes.
?
Do not leave the fabric softener in the
2
days.
Softener will automatically be added
during the last rinse cycle.
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the clothes
directly
12
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
Do not exceed the maximum fill line.
Overfilling
detergent only for the front
washer.
Part load
?
a
results, avoid oversudsing.
Adding Fabric Softener
(
(Causing
Detergent
()
loading
?
motor.
at
unction
F
Recommended
courses
according
Fabric
to the
laundry type
Maximum
Proper
Program
Option
Type
First check if
laundry
is machine
95˚C
(white
Minutes
2.74
Rating
159
Crease Care
sheets...)
Bio
Color fast gaments
60˚C
(shirts, night dresses,
pajamas...)and lightly (30˚C, 40˚C,
60˚C-Eco)
soiled white
in
kWh
Time Save
Rinse+
cotton, linen
towel and
Time
in
Pre Wash
washable.
Cotton
Load
Temp.
Energy
Pre Wash
Time Save
Rinse+
Crease Care
Bio
Refer to
the
Rating
155
Energy
label
cotton(underwear...)
Synthetic Polyamide, Acryic,
Polyester
Pre Wash
40˚C
(60˚C, 30˚C)
Time Save
Rinse+
Crease Care
Less than
3.5
0.45
85
0.41
59
0.28
59
0.03
58
0.35
30
kg
Bio
Delicate
Delicate laundry
easily damaged
Wool/Silk
Machine washable
woolens with pure
new
Wool, Silk
only
Hand
"Hand Wash" marked
Wash
delicate and wool
30˚C
(40˚C, Cold)
30˚C
(40˚C, Cold)
Colored
which is
Rinse+
Crease Care
Time Save
Rinse+
Crease Care
Time Save
Cold(30˚C )
Rinse+
Crease Care
laundry
Quick 30
Time Save
Laundry
lightly soiled
30˚C
Rinse+
Crease Care
Less than
3.0
kg
Less than
2.0
kg
Less than
2.0
kg
Less than
2.0
kg
fast.
Pre Wash
If the
laundry is heavily soiled, "Pre Wash" course is recommended. Pre Wash is
Synthetic Program.
Eco : By selecting Eco function, the water temperature is reduced and washing time is lengthened.
So you can economize in your consumption of heating energy.
Rinse+: Used to introduce an additional rinse, which may assist in removing traces of detergent
:
available in Cotton and
residue.
Bio
:
If you want to eliminate protein stains
pressing the option button.
NB. You
can
(milk, blood, chocolate...), you may select Bio function by
only select Bio function when temperature is higher than 60˚C
Synthetic.
Cotton and
in
13
H
ow
to
use
washer
1200
1000
800
400
No
Spin
Rinse+Spin
1. Cotton
selected upon power
?
?
?
2. Manual
automatically
Press the
Power(
) button
Press the
Start/Pause(
to start.
) button.
?
?
Initial condition
-
-
Wash
:
main wash
Rinse
:
3 times
Program : Cotton
14
) button
to start.
each button.
selecting the each conditions, please
refer to the page15~page20
?
800 rpm [WD-8023FB]
Water temperature
Power(
Select the conditions which you want to
use, by turning the program dial and
pressing
1200 rpm [WD-1223FB]
1000 rpm [WD-1023FB]
-
Press the
For
-Spin:
-
Selecting
on.
:
60˚C
Press the
Start/Pause(
) button.
H
to
ow
use
washer
Sye
Coo
eay
e
DLk
1200
SaPase
1000
oo/Sk
800
400
Q
R
e
k30
Rinse +Spin
a
(1)
(1)
(2)
(3)
(4)
meSave
B
dWas
a
CeaseCa
se
Button
Dial
(2)
:
Power
Program
:
Button
:
Start/Pause
Button
:
Time
Delay
(3)
(4)
(5)
(6)
(7)
(8)
Button
:
Bio
(5)
(6)
Button
:
Time Save
Button
:
Rinse+
Button
:
Pre Wash
(7)
(8)
(9)
(10)
Button
(11)
Crease Care
(9)
(10) Button : Spin
(11) Child Lock
:
Option
ime
2. Time Save
Save
?
This
?
option
To
?
By pressing the Option button, all
Option functions may be selected.
-
Bio
-
Pre Wash
-
-
-
Rinse+
be used to reduce the time of
this option press the Time Save button
before the wash program is started.
use
once
?
can
wash program.
a
This
option
is not available with Quick 30
program.
3. Rinse+
Used to additional rinse, which may assist
removing traces of detergent residue.
?
Crease Care
in
Time Save
By selecting Rinse+ function,
?
time and the rinse water
are
the rinse
increased.
1. Bio
4. Pre Wash
?
If you want to eliminate
protein
stains(milk, blood, chocolate...), you may
select Bio function by pressing the option
button. [You can select Bio function when
temperature is higher than 60˚C in Cotton
and Synthetic.]
?
If the
laundry
course
?
is
heavily soiled,
"Pre Wash"
is effective.
Pre Wash is available in Cotton and
Synthetic.
NOTE
Do not
use
or near
the
damage
to
Pre Wash stain
Washer,
removers on
they may cause
the control panel's finish.
as
5. Crease Care
?
If you want to prevent crease, select this
button with spin speed.
15
H
ow
to
use
washer
Spin
?
800
1000
1200
600
800
1000
500
600
800
400
400
400
[WD-8023FB]
[WD-1023FB]
Spin Speed
program
as
is available
spin
2. No spin
according
to the
?
follows.
If
no
after
WD-8023FB
?
the
[WD-1223FB]
1. Spin selection
?
By pressing the Spin button,
speed can be chosen.
-Cotton, Rinse+Spin, Synthetic,
Wool/Silk,Hand Wash, Quick 30,
spin is selected,
draining water.
will
The required lamp
identification.
the washer stops
light
up for
Delicate
Rinse Hold-No
Spin-400-500-600-
800
WD-1023FB
?
3. Rinse Hold
?
-Cotton, Rinse+Spin, Synthetic,
Wool/Silk,Hand Wash, Quick 30
Rinse Hold-No
-
Rinse Hold-No
Spin-400-600-800
WD-1223FB
-Cotton, Rinse+Spin, Quick 30
?
Rinse Hold-No
Spin-400-800-1000-
1200
-
Delicate
Rinse Hold-No
-
Spin-400-800
Synthetic, Wool/Silk, Hand Wash
Rinse Hold-No Spin-400-800-1000
16
a
?
Delicate
by pressing
this function leaves clothes in
the machine;
Spin-400-600-800-
1000
Is selected
repeatedly
the
spin
button
suspended in the water
entering into spin.
after
rinse without
To
proceed through
to a drain or
once
the rinse hold function is
using
to program dial scroll to
spin,
completed
the required
program.
(Spin)
The
required lamp
identification.
will
light
up for
H
ow
to
use
washer
Child Lock
Water Temp.
If you choose to lock
the buttons on the
control
assembly to
prevent tampering this
function may be
selected.
Rinse+Spin
1. Child Lock
?
?
By turning
the
temperature
-
can
Child Lock
can
be set
by pressing the Rinse+
simultaneously.
button and Pre Wash button
Program Dial, the water
be selected.
Cold
-30˚C/40˚C/60˚C/95˚C
1. Water Temperature
?
?
Water temperature can be selected
according to the program.
The required temperature lamp
for identification.
For the
more
refer to
the
detailed
will
light
?
When child lock is set, all buttons
are
inoperable
except power button.
To deactivate Child Lock system, press
Rinse+ and Pre Wash button simultaneously
again.
up
information, please
page13.
?
To
change
to the desired program, whilst in
child lock mode.
1. Press both Rinse+ and Pre Wash
once
together
again.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button
again.
Rse
Change
the desired
program
?
The child lock can be set at any time and it
is automatically canceled when operational
errors occur. Also Child Lock works when
power is off.
17
to
ow
H
use
Time
washer
Program
Delay
Rinse+Spin
1. Time
Delay
Preparing washing before starting
Delay"
Turn on the water tap.
"Time
8 programs
?
are
available
according
to the
laundry type.
-
-
-
Lamp
?
Load
laundry and close the door.
Place the detergent and fabric softener
will
up to indicate selected
light
program.
in
the drawer.
?
How to set "Time
-
-
-
1. Program
Delay"
Press Power button.
Turn the
Program
?
the program you require.
Press Time Delay button and set the
-
Quick 30
Press the Start/Pause button.
Wash-
(":" blinks.)
?
pressing of the button
delay by one hour.
Each
time
To cancel the time
advances
on
delay, press the Power
button.
Time
'expected time' from the
completion of washing cycle
selected process (Wash, Rinse, Spin).
Delay
present
or
?
Delicate-
-
Rinse+Spin- Drain
Wool/Silk
Synthetic".
-
Hand
-
2. Course
-
?
Cotton
If Time Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
?
"
-
Regarding to the laundry type for each program
Please refer to the page13.
hours.
?
pressed, the
By turning the Program dial, the program is
selected in order of
desired time.
-
When Start/Pause button is
Cotton program is automatically selected.
dial to select
is
to the
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time
18
may vary.
-
-
Cotton
-
30
Quick
Synthetic
-
-
Delicate
Wool/Silk
Hand Wash
-
-
Rinse+Spin
Drain
ow
H
to
use
washer
Start/Pause
Power
1. Power
1. Start
?
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
Press the Power button to turn power
on
and off
cycle.
?
To cancel the Time
Delay function,
pressed.
if the
power button should be
2. Initial Program
2. Pause
?
?
?
If temporary stop of wash cycle is
needed, press the Start/Pause button.
When in Pause, the power is turned off
automatically after 4 minutes.
?
at the end of the wash
pressed,
the
for Cotton program. And
the other initial conditions as follows.
?
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
When the Power button is
washer is
ready
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
[WD-8023FB]
-
Cotton
Program
/ Main wash /
Normal Rinse / 800 rpm / 60˚C
[WD-1023FB]
-
Cotton
Program
/ Main wash /
Normal Rinse / 1000 rpm / 60˚C
[WD-1223FB]
-
Cotton
Program
/ Main wash /
Normal Rinse / 1200 rpm / 60˚C
19
H
ow
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
?
When child lock is selected, the
is displayed.
"
?
display
"
delay is selected, it shows
remaining times to finish the selected
?
program.
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
2. Self
diagnosis display
-
?
If the machine encounters
operation,
displayed.
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
:
:
:
a
during
-
the associated fault will be
-
Water pressure
Problem of
-
sensing
error
-
overfilling
water
-
Door is not closed
:
Over load in motor.
:
Over load in motor.
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
fault
"
4. Time left
When time
the
washing
-
-
-
by
manufacturer.
Cotton 95˚C : around 2 hours and 39 minutes
Cotton 60˚C
:
around 2 hours and 35 minutes
Synthetic : around
Delicate
Wool/Silk
1 hour and 25 minutes
around 59 minutes
:
:
around 59 minutes
Hand Wash : around 58 minutes
Quick 30 : around 30 minutes
Rinse+
Spin
:
around 20 minutes
Drain : around 1 minute
trouble
?
The
washing time may vary by the
laundry, water pressure,
temperature and other washing
amount of
Water temperature trouble
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
water
conditions.
?
If
an
suds
unbalanced load is detected
or
if the
program operates, the
wash time may be extended.
20
removing
M
aintenance
Before
the washer interior,
cleaning
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
When
disposing
of the
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
"
-"
detergent
-
message will blink
error
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain
using
any threads
or
emptying
the lower
opening
Open
cap( )byusinga
cover
draining
the door in
2.
laundry.
running of your machine.
the drain and then open the pump filter to
Allow the water to cool down before
1.
left in the
smooth
remove
whatever
objects.
Be careful when
or
objects
ensure
an
if the water is hot.
cleaning
the drain pump,
carrying
out emergency
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Remove any
At
cleaning,
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
flowing
on
to the floor. When
( )
open to the left.
material
( ).
After
turn the pump filter
coin. Turn the drain
use a
vessel to prevent
foreign
from the pump filter
(
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
3
2
2
21
)
aintenance
M
Dispenser drawer
After
?
?
?
a
while
and fabric softeners leave
detergents
It should be cleaned from time to time with
a
jet
of
a
deposit
running
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
water.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
?
with
occasionally
washing
?
?
recess
which should
old toothbrush.
replace
the drawer and
run a
drum
If you live in a hard water area, limescale may
seen and thus not easily removed.
Over time the build up of scale
be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
recess
also accumulate inside the
continuously
clogs appliances,
build up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
Although
the
washing
If you
use
descaling agents, dyes
or
bleaches, make
sure
they
kept
places where
in check these may have to
of rust
can
be caused
Remove any spots with
Never
22
use
steel wool.
a
stainless steel
damage part
are
of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler may contain chemicals that may
it cannot be
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
water.
Repeat process if necessary.
NOTE
Remove hard water
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
T roubleshooting guide
This
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
out of balance.
If not removed
been removed?
Are all the feet
the
probably
Stop
and
redistribute wash load.
Have all the transit bolts and
packing
If sound continues, washer is
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
clogged.
are
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
?
drains
24
slowly.
Drain hose is kinked
or
clogged.
or
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
Turn
by a qualified electrician.
on water supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
25
T roubleshooting guide
Possible Cause
Symptom
?
?
?
?
?
?
?
?
?
Water
Water
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
are
Check another tap in the house.
Fully open tap.
Straighten hose(s).
kinked.
hose(s)
Solution
clogged.
Check the filter of the inlet hose.
Drain hose is kinked
Clean and
The drain filter is
Clean the drain filter.
or clogged.
clogged.
straighten the
Load is too small.
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
imbalance
detection and correction system. If
individual heavy articles are loaded
(ex.
bath mat, both robe,
or
drain hose.
2 similar items to
help
load to allow proper
etc.) this system
interrupt the
may stop spinning
spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry
to balance the load and repeat the spin
cycle.
or even
?
?
Is the door
Close the door.
opened?
If"
"is not released, call for service.
Unplug the
power
plug
service.
?
Water overfills due to the
faulty water
valve.
?
?
?
26
Water level
Close the water tap.
Unplug the power
Call for service.
sensor
Over load in motor.
Over load in motor.
has malfunctioned.
plug.
and call for
T
of Warranty
erms
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by factors
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
other than normal domestic
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
by
of
product
pests for
or
change
example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
on use
example
water drain
warming beeps.
the installation for
example, levelling
the
product, adjustment of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
?
?
?
Replace fuses
wiring
or
correct house
product
plumbing.
caused
by
is used for commercial purpose, it is not warranted.
Public
(Example
places
center, dormitory)
:
the
repairs.
Incidental or consequential damage to personal property
possible defects with this appliance.
If this
including
example, grit, nails, bra wires, buttons etc.
in or correct house
Correction of unauthorized
the owner's manual.
/ substances from the machine,
pump and inlet hose filter for
?
by
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
a
27
Download PDF