LG | WD-80130F | LG WD-80130F Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD(M)-10130(5)F
WD(M)-80130F
WD(M)-65130F
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
40%
n
Jumbo drum
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
n
More economical
Intelligent
Wash
by Intelligent
System
Wash
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
n
Temp.
Child-Lock
The Child-Lock
Option
pressing
n
system has been used
any button to
Low noise
speed
change
control
to
prevent children from
the program
during operation.
system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
C
water level and
consumption.
evenly
distributes
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
Do not install
be
?
?
or
store the washer where it will
?
exposed to the weather.
Do not
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
instructions
or
published user-repair
instructions
?
that you understand and have the skills to carry
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this
is used
by
or near
Do not wash
or
dry
articles that have been
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
in, washed in, soaked in,
or
on,
with,
this or any other
Do not leave the washer door open.
An open door could entice children to
or
appliance
or
?
inside
?
Never reach into washer while it is
?
The
hang
can
try to
To minimize the
this
possibility of electric shock,
appliance from the power supply
or
disconnect the washer at the household
on
?
moving.
completely stopped.
laundry process
retardant of fabrics.
or
distribution
crawl inside the washer.
until the drum has
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
unplug
play
appliance.
the door
?
children.
Do not allow children to
?
using
instructions.
out.
?
to persons when
combustible
recommended in the user-maintenance
?
injury
cleaned
Do not
or
or
washer, follow basic precautions, including the following:
Wait
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
pecification
S
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
Drawer
or a
(For detergent and
fabric softener)
or its service agents
similarly qualified person in
order to avoid
PreWa h
1000
Hand
Wool
Wa h
Quck 30
800
400
i
Dlicate
Synhetic
Rinse+Spin
P
No Spin
RinseHold
304695˚C
TimeSave
Control
Cold
Pump
Coton
a
hazard.
Rinse+
CreaseFree
Option
panel
Temp.
Spin
Drum
Door
Lower
cover
Adjustable
Lower
Drain pump filter
Drain
Name
n
Power
n
Size
:
Weight / Max.Watt
Wash capacity
Spin speed
:
n
n
cover
supply
n
Water
n
Permissible water pressure
consumption
The appearance and
:
Front
:
220-240V~,50Hz
loading washing
machine
600mm(W) 600mm(D) 850mm(H)
67kg / 2200W
: 7.0kg
: No Spin/400/500/650[WD(M)-65130F]
No Spin/400/600/800[WD(M)-80130F]
No Spin/400/800/1000[WD(M)-10130(5)F]
:67
(9.6 /kg)
: 0.3-10kgf/
(30-1000kPa)
specifications
may be varied without notice to raise the units
quality.
n
Accessories
Spanner
4
cap
plug
n
n
feet
nstallation
I
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Install
Transit bolts
n
The
appliance
is fitted with transit bolts to
Removing
n
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
?
?
If
they
are
not
removed, it may
use.
bungs.
cause
heavy
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
vibration, noise and malfunction.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
n
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
under entire washer is 1˚
slope
Power outlet
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with
than
Laundry
one
Additional Clearance :
For wall, door and floor modeling is
Tub
approx.
2cm
more
appliance.
(10cm
: rear
Do not
place
/2cm:right
or
store
& left
required.
side)
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
n
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
identifying
letter E
or
by
the earth
symbol (
)
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
n
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
2. If the
3.
4. Connect the machine to
5. The
n
appliance
Washing
must be
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Machine is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
n
Connecting
water
hose
supply
Water
supply pressure must be between
(0.3~10kgf/cm2)
30kPa and 1000kPa
Don't
strip or crossthread when connecting
Inlet hose to the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the
completely
?
tap
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Hot water
?
Hot(option)
on
the
When your washer has two valves,
tap
Cold
Cold
Make sure that there is no kink
hose and that it is not crushed.
water
tap
?
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Tap without
Normal
n
1. Unscrew the fixing
attach the tap.
screw
thread &
2.
to
screw
type inlet hose
Push the connector up till the
rubber
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
Tap without
Normal
n
1. Untighten the upper
thread &
connector
2.
touch
one
packing
contact with the
Upper
Rubber
Connector
Fixing
tighten
packing
screw
type inlet hose (Single inlet models)
Push the upper connector up till
the rubber
screw.
Middle
the 4
Rubber
connector
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
tap is
Connector
Water
hose
Middle
guide plate.
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
tap. Then pull the
down, pushing the
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
I
n
nstallation
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
ca.
105
When
installing the drain hose sink,
it tightly with a string.
secure
cm
?
Proper securing
protect
water
of the drain hose will
the floor from
damage
due to
leakage.
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
max.
ca.
?
100
Proper securing
cm
min.60cm max.10cm
cm
The drain hose should not be
higher than
?
105
?
100cm
min. 60cm
strap
min. 60cm
placed
above the floor.
of the drain hose will
protect the floor from damage due
water
100cm
max.
to
leakage.
When the drain hose is too
long,
do not
force back into the washer. This will
cause
abnormal noise.
9
I
n
nstallation
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
floor
the
appliance
on a
solid and level
surface, preferably in
of
a corner
room.
2. If the floor is uneven, adjust the
adjustable feet as required. (do not
insert
pieces
Make
sure
of wood etc. under the
that all four feet
are
feet)
stable
and
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
that the
Adjustable
Higher
Adjustable
feet
a
Lower
feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
move
the
up and down at
(Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
all.
10
C
n
before
are
Caring
before
washing
washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always
transfer
sort dark colors from
soiled items with
Soil
3.
Caring
n
before
colors and whites. Wash
separately as dye and lint
possible, do not wash heavily
one.
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
pale
discoloration of white etc. If
causing
lightly soiled
can occur
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets to
make
sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
dding detergent
A
n
Adding detergent
1. The
Dispenser
and fabric softener
3. Detergent dosage
Drawer
?
The
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
used more than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
(Causing
a
detergent only for the front
washer.
Detergent
for water
?PreWash+MainWashU
motor.
usage may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
the last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the clothes
directly
12
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
at
F
n
unction
Recommended
according
courses
Fabric
to the
laundry type
Maximum
Proper
Program
Energy
Type
First check if
Load
Temp.
laundry
is machine
in
kWh
Minutes
Pre Wash
95˚C
Time Save
washable.
Rinse+
(white cotton, linen
sheets...)
Cotton
Time
in
Option
Rating
2.74
158
Rating
1.33
154
Less than
0.45
88
0.41
58
0.28
58
0.03
57
0.35
30
Crease Care
towel and
Color fast gaments
Pre Wash
(shirts, night dresses,
pajamas...)and lightly
60˚C
Time Save
(Cold, 30˚C,
40˚C)
Rinse+
soiled white
Crease Care
cotton(underwear...)
Synthetic Polyamide, Acryic,
Polyester
Delicate
Delicate
laundry
easily damaged
(silk, curtains...)
Wool
Machine washable
woolens with pure
new wool only
Hand
"Hand Wash" marked
Wash
delicate and wool
laundry
Colored
Quick 30
which is
Laundry
lightly soiled
fast.
Pre Wash
:
If the
Pre Wash
40˚C
(60˚C, Cold,
30˚C)
Time Save
Rinse+
Time Save
(40˚C, Cold)
Rinse+
30˚C
Time Save
(40˚C, Cold)
Rinse+
Cold(30˚C,
40˚C)
Time Save
laundry is heavily soiled, "Pre
Synthetic Program.
kg
Crease Care
30˚C
30˚C(40˚C,
Cold)
3.5
Rinse+
Less than
3.0
kg
Less than
2.0
kg
Less than
2.0
kg
Less than
Rinse+
2.0
kg
Wash" Cotton is recommended. Pre Wash is available in
Cotton and
Rinse+: Used to introduce
an
additional rinse, which may assist in
removing traces
of
detergent
residue.
13
H
ow to use
washer
1000
95˚C
800
60
400
No
40
Spin
Rinse Hold
Spin
1. Cotton
?
Press the
Power(
?
Press the
Start/Pause(
?
) button
Wash
:
main wash
-
Rinse
:
3 times
to start.
) button.
?
?
-
-
Program : Cotton
14
Cold
Option
Temp.
Selecting
Press the
Power(
) button
to start.
Select the conditions which you want to
use, by pressing each button.
conditions, please
refer to the page15~page20
Spin : 1000 rpm [WD(M)-10130(5)F]
800 rpm [WD(M)-80130F]
650 rpm [WD(M)-65130F]
Water temperature
Crease Care
For selecting the each
?
-
Time Save
on.
Initial condition
-
Rinse+
30
2. Manual
automatically
selected upon power
Pre Wash
:
60˚C
Press the
Start/Pause(
) button.
H
ow to use
washer
1000
95˚C
800
60
400
No
40
:
Button
:
Power
Program
Button
:
Start/Pause
Time Save
Crease Care
Cold
Option
Temp.
Spin
Button
Rinse+
30
Spin
Rinse Hold
(1)
(2)
(3)
Pre Wash
(4) Button : Spin
(5) Button : Temp.
(6) Child Lock
(7)
(8)
Button
:
Button
:
Option
Option
Option
Pre Wash
Rinse+
Time Save
Crease Care
2. Time Save
?
This
of
?
Option
To
a
option
can
be used to reduce the time
wash program.
this
use
button
press the Time Save
before the wash program is
option
once
started.
?
By pressing the Option button, all
Option functions may be selected.
?
This
option
is not available with Quick 30
program.
-
-
-
-
Pre Wash
3. Rinse+
Time Save
Rinse
+
?
Crease Care
removing
?
If the
laundry
course
?
is
rinse, which may assist in
traces of
heavily soiled,
"Pre Wash"
is effective.
are
residue.
the rinse time
increased.
4. Crease Care
?
Pre Wash is available in Cotton and
detergent
By selecting Rinse+ function,
and the rinse water
1. Pre Wash
?
Used to additional
If you want to prevent crease, select this
button with spin speed.
Synthetic.
The
required lamp
identification.
will
light up for
15
ow to use
H
washer
Spin
650
800
1000
500
600
800
400
400
400
No
Spin
No
Rinse Hold
No
Spin
Spin
2. No
?
Rinse Hold
Rinse Hold
If
spin
spin is selected,
draining water.
no
The required lamp
identification.
Spin
Spin
[WD(M)-65130F]
[WD(M)-80130F]
?
By pressing
can
1.
the
Spin button,
[WD(M)-10130(5)F]
the
spin speed
?
program
?
as
according
to the
follows.
-
Spin 400 500
Delicate/Wool/Hand Wash /Quick 30
400 500 650 Rinse Hold No
?
Cotton/Synthetic
800 Rinse Hold No
-
Spin 400 600
Delicate/Wool/Hand Wash /Quick 30
400 600 800 Rinse Hold No
?
Spin
WD(M)-80130F
-
Spin
WD(M)-10130(5)F
-
Cotton/Synthetic
1000 Rinse Hold No
-
Spin 400 800
Wool/Quick 30
400 800 1000 Rinse Hold No
-
Hand Wash/Delicate
400 800 Rinse Hold No
16
the
To
proceed through
spin
button
Spin
Spin
The required lamp
identification.
will
after
to a drain or
the rinse hold function is
Program button and Spin
required program.
(Spin or Pump)
Cotton/Synthetic
650 Rinse Hold No
by pressing
repeatedly
machine; suspended in the water
rinse without entering into spin.
WD(M)-65130F
-
Is selected
this function leaves clothes in the
Spin selection
is available
light up for
3. Rinse Hold
be chosen.
Spin speed
stops after
Spin
?
?
will
the washer
a
spin, once
completed using to
button to the
light up for
washer
ow to use
H
Water
Temp.
1. Child Lock
?
By pressing
?
95˚C
the
Temp.
40
30
by pressing and
holding
Temp. and the Option
button simultaneously.
can
selected.
Cold
Cold
-
-30˚C/40˚C/60˚C/95˚C
(All program lamps blink)
?
1. Water
-
-
Option
Temp
Temp.
?
be set
the the
button, the water
temperature can be
60
Child Lock
Temperature
Water
temperature
below
according
can
be selected
?
as
to the program.
When child lock is set, all buttons
are
inoperable
except power button.
To deactivate Child Lock system, press the
Temp. and the Option button simultaneously
again.
Cotton
60˚C 95˚C Cold 30˚C 40˚C
Synthetic
40˚C 60˚C Cold 30˚C
-
?
-
Hand Wash
Cold 30˚C 40˚C
detailed
change
to the desired program, whilst
1. Press both the
required temperature lamp
identification.
more
To
in child lock mode.
The
For the
Option
Temp
Delicate & Wool & Quick 30
30˚C 40˚C Cold
will
light up for
together
once
Temp.
again.
and the
Option
2. Press the Start/Pause button.
information, please refer
to the page13.
3. Select the desired program and press
the Start/Pause button again.
Child Lock
Change
the desired
program
Temp
Option
Temp.
?
If you choose to lock the buttons on the control
to prevent tampering this function
assembly
may be selected.
Option
The child lock
is
errors occur.
be set at any time and it
canceled when operational
can
automatically
Also Child Lock works when
power is off.
NOTE
?
If the
Program lamps
are
blinked at the
same
time after the power off or the end of the
washing, the child lock mode is set.
?
Cancel the child lock mode
Temp.
and the
for 3 seconds.
Option
by pressing the
simultaneously
button
17
H
ow to use
washer
Program
?
8 programs
are
available
according
to the
laundry type.
?
Lamp will light
up to indicate selected program.
(Program)
1.
?
-
2. Course
Program
When Start/Pause button is
-Cotton
-Wool
Coloureds program is
-Synthetic
-Hand Wash
-Delicate
-Quick 30
By turning
selected in
pressed, the
automatically selected.
the
Program dial, the program is
order of "Cotton Synthetic
Delicate Wool Hand Wash Quick 30
Rinse+Spin Pump".
Regarding to the laundry type for each program
Please refer to the page13.
18
-Rinse+Spin
-Pump
ow to use
H
washer
Start/Pause
Power
1. Power
1. Start
?
?
This
Start/Pause( ) button is used
wash cycle or pause the wash cycle.
to start
2. Initial
2. Pause
?
If
temporary stop of wash cycle is needed,
press the
?
When in
Start/Pause(
?
)
after 4 minutes.
at the end of the wash
cycle.
on
Program
When the Power button is
pressed,
the
for Cotton program. And
the other initial conditions as follows.
?
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
?
button.
Pause, the power is turned off
automatically
Press the Power button to turn power
and off
washer is
ready
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause( )
button and then the washer will proceed.
Initial program
[WD(M)-65130F]
-Cotton Program/Main Wash
Normal Rinse/650 rpm/60˚C
[WD(M)-80130F]
-Cotton Program/Main Wash
Normal Rinse/800 rpm/60˚C
[WD(M)-10130(5)F]
-Cotton Program/Main Wash
Normal Rinse/1000
rpm/60˚C
19
H
ow to use
washer
Time Left
?
Recommended program
-
-
-
-
-
-
-
-
-
?
?
Cotton 95˚C
:
Cotton 60˚C
:
by
manufacturer.
around 2 hours and 38 minutes
around 2 hour and 34 minutes
Synthetic
:
around 1 hour and 28 minutes
Delicate
:
around 58 minutes
Wool
:
around 58 minutes
Hand Wash
Quick 30
:
around 57 minutes
:
around 30 minutes
Rinse+
Spin
Pump
around 1 minute
The
:
:
around 19 minutes
time may vary by the amount of
and
other washing conditions.
temperature
If
an
washing
unbalanced load is detected
or
the wash time may be extended.
(Max. increasing time is 45minutes.)
20
laundry,
if the suds
water pressure, water
removing program operates,
aintenance
M
Before
cleaning
the washer interior,
unplug the electrical
power cord to avoid electrical
shock to avoid electrical shock hazards.
n
The water inlet filter
-
Rinse+ and Crease Care
detergent
-
lamps will
blink
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
n
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain
using
any threads
or
Open the lower cover
cap( )byusinga
finger Turn the drain
plug( )topullout
the hose.
2.
left in the
smooth
laundry.
running of your
machine.
the drain and then open the pump filter to
remove
whatever
objects.
Be careful when
1.
objects
ensure
draining
if the water is hot.
Unplug the drain plug ( ),
allowing the water to flow out.
this time
water
use a
flowing
vessel to
on
3. Remove any
At
prevent
to the floor. When
foreign
from the pump filter
cleaning,
(
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
( )
After
turn the pump filter
water does not flow any more, turn
open to the left.
material
( ).
original place.
cover
cap.
3
1
3
2
2
21
)
aintenance
M
n
Dispenser drawer
After
a
while
detergents
and fabric softeners leave
deposit
It should be cleaned from time to time with
?
If necessary it can be removed completely from the machine
downwards and by pulling it out.
?
To facilitate
cleaning,
the upper
a
jet
of
a
?
running
in the drawer.
water.
by pressing
part of the fabric softener compartment
the catch
can
be removed.
max
max
n
The drawer
Detergent
can
be cleaned
?
with
occasionally
an
Once you have finished cleaning,
rinse cycle without laundry.
n
?
recess
also accumulate inside the
The
washing
recess
replace
the drawer and
run a
drum
If you live in a hard water area, limescale may
seen and thus not easily removed.
Over time the build up of scale
be replaced.
continuously
clogs appliances,
build up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
?
The
drum should be cleaned from time to time.
?
If you
?
Although
the
which should
old toothbrush.
washing
use
descaling agents, dyes
or
bleaches, make
sure
they
kept
places where
in check these may have to
of rust
can
be caused
Remove any
Never
22
use
spots
with
steel wool.
a
stainless steel
damage part
are
of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler may contain chemicals that may
it cannot be
washing
machine.
machine
aintenance
M
n
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
with
spills. Wipe
damp
cloth.
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
through
a
opening,
complete cycle using
Repeat
process if necessary.
NOTE
Remove hard water
n
flexible
and door
glass.
hot water.
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
freezing
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
gasket
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
dispenser
8. Store washer in
9. To
remove
through
a
an
for 1minute to drain out all water.
expelled.
cord, dry the drum interior, and close the door.
drawer drain and
excessive water from the
dry
compartments.
uprignt position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
roubleshooting guide
T
This
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop washer
and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads may produce
thumping sound. This is usually
If sound continues, washer is
probably out of balance. Stop and
normal.
redistribute wash load.
a
Vibrating
noise
?
Have all the transit bolts and
packing
?
Are all the feet
the
If not removed
been removed?
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
is not
hose(s)
are
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug
sure
fits
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
by a qualified electrician.
on water supply tap.
Turn
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting guide
T
Possible Cause
Symptom
Rinse+
?
Water
?
Water
Crease Care
?
?
Pre Wash
Time Save
1000
800
(800) (650)
(600) (500)
400
(400) (400)
No
open.
Water inlet
Rinse+
are
clogged.
Clean and
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
appliance
or clogged.
clogged.
has
an
imbalance
detection and correction
system. If
individual
are
heavy
articles
or
straighten
the drain hose.
2 similar items to
Rearrange
spinning
load to allow proper
loaded
etc.) this system
or
even
may stop spinning
interrupt the
spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry
to balance the load and repeat the spin
cycle.
Close the door.
?
30
Cold
Is the door
If "door error" is not released, call for
opened?
service.
95˚C
60
Unplug the
40
service.
power
plug
30
Cold
Pre Wash
Rinse+
Time Save
Crease Care
95˚C
40
?
Water overfills due to the
?
Water level
?
Over load in motor.
Time Save
sensor
Cold
1000
95˚C
800
60
400
40
No
30
Rinse Hold
26
Cold
Close the water tap.
Unplug the power
Call for service.
30
Spin
faulty water
valve.
Pre Wash
60
help
bath mat, both robe,
60
40
Check the filter of the inlet hose.
Drain hose is kinked
?
Crease Care
hose(s)
The drain filter is
(ex.
Pre Wash
Straighten hose(s).
kinked.
are
Fully open tap.
?
Spin
Time Save
hose(s)
The filter of the inlet
Check another tap in the house.
?
Rinse Hold
95˚C
supply is not adequate in area
supply taps are not completely
Solution
has malfunctioned.
plug.
and call for
T
of
erms
Warranty
What Is Not Covered:
?
?
?
?
Service
to your home to teach you how to use the
trips
If the
product
rating plate.
is connected to any
voltage
product.
other than that shown
the
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
pests for
or
change
example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
by
of
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
by the
owner's manual.
/ substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
?
?
?
Replace
or
correct house
Correction of unauthorized
Incidental
possible
?
fuses in
If this
or
wiring
or
correct house
plumbing.
repairs.
consequential damage to personal property
appliance.
caused
by
defects with this
product
is used for commercial purpose, it is not warranted.
Public
(Example
places
center, dormitory)
:
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
P/No.: 3828ER3012A
Download PDF