LG | WD-8013F | LG WD-8013F Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD-1013F
WD-8013F
WD-6513F
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
40%
?
Jumbo drum
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
?
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
?
Temp.
Child-Lock
The Child-Lock
Option
pressing
?
system has been used
any button to
Low noise
change
to
prevent children from
the program
during operation.
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
C
water level and
consumption.
evenly
distributes
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
W arnings
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
or injury
precautions, including the following:
store the washer where it will
?
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
recommended in the user-maintenance
instructions
or
published user-repair instructions
?
that you understand and have the skills to carry
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals,
?
?
?
have been
or
etc.
Do not leave the washer door open.
An open door could entice children to
or
hang
Never reach into washer while it is
laundry process
retardant of fabrics.
can
Wait
reduce the flame
or
try to
possibility of electric shock,
unplug this appliance from the power supply
To minimize the
or
disconnect the washer at the household
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
distribution
?
moving.
completely stopped.
The
?
on
crawl inside the washer.
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
supervision is necessary if this appliance
is used by or near children.
Do not allow children to play on, with, or inside
this or any other appliance.
until the drum has
?
?
Close
the door
dry articles that
instructions.
out.
?
or
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
combustible
Do not
or
Do not wash
using
cleaned in, washed in, soaked in,
exposed to the weather.
Do not
to persons when
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
?
?
If you don't have the proper outlet, consult
WARNING :
an
electrician.
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
Improper
shock. Check with
a
-
3
S pecification
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
or its service agents
similarly qualified person in
manufacturer
Drawer
or a
(For detergent and
fabric softener)
order to avoid
1000
Hand Wah
Quick 30
Wool
Delicate
Synhetic
Rinse+Spin
P
800
400
No Spin
RinseHold
PreWah
406 95˚C
TimeSave
hazard.
CreaseFree
Control
30
Cold
Pump
Option
Coton
a
Rinse+
panel
Temp.
Spin
Drum
Door
Lower
cover
Adjustable
Lower
Drain pump filter
Drain
Name
?
Power
?
Size
supply
:
Front
:
240V~,50Hz
loading washing
machine
600mm(W) 600mm(D) 850mm(H)
67kg / 2200W
: 7.0kg
: No Spin/400/500/650[WD-6513F]
No Spin/400/600/800[WD-8013F]
No Spin/400/800/1000[WD-1013F]
:87
(12 /kg)
: 0.3-10kgf/ cm2 (30-1000kPa)
Weight
Wash capacity
Spin speed
?
:
?
Water
?
Permissible water pressure
The external hot water supply 60˚C and must NOT be above 70˚C
?
cap
:
/ Max.Watt
?
cover
plug
?
?
feet
consumption
?
Permissible cold water
?
TT
temperature
:
4-25˚C
co.y with the requirement by certification Type Test Mark.
No further backflow protection required for connection to the water supply.
?
:
Appliance
The appearance and
?
specifications
may be varied without notice to raise the units
Accessories
Spanner
4
quality.
nstallation
I
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Install
Transit bolts
?
The
appliance
is fitted with transit bolts to
Removing
?
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
?
?
If
they
are
not
removed, it may
use.
bungs.
cause
heavy
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
vibration, noise and malfunction.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
I
?
nstallation
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
than
Laundry
one
appliance.
Additional Clearance :
For wall, door and floor modeling is
Tub
approx.
2cm
(10cm
: rear
Do not
place
/2cm:right
or
store
& left
required.
side)
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
?
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol (
) or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
identifying
6
nstallation
I
?
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
2. If the
3.
4. Connect the machine to
5. The
?
appliance
must be
Washing Machine
an
manufacturer
after
so
that the
plug
is
its service agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
easily
is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
?
Connecting
water
supply hose
Water supply pressure must be between
30kPa and 1000kPa (0.3~10kgf/cm2)
Don't
strip or crossthread when connecting
Inlet hose
to
the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the tap
completely
?
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
When your washer has
Hot water tap
?
Cold
Hot(option)
Make sure that there is no kink
hose and that it is not crushed.
Cold
water
tap
?
two
on
the
valves,
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
?
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
2.
screw
type inlet hose
Push the connector up till the
rubber
packing
3.
is in
with the tap. Then
tight contact
tighten the 4
screws.
?
Normal Tap without thread &
1. Untighten the upper
connector
2.
touch type inlet hose
one
Push the upper connector up till
the rubber packing is in tight
screw.
contact with the
Upper
Rubber
Connector
Fixing
screw
tighten
packing
Middle
connector
the 4
Rubber
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
(Single
3. Connect the
water
inlet
supply
models)
hose
to the middle connector,
tap. Then
pushing
the
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Guide
Water
Middle
connector
remove
plate
?
hose
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
I
?
nstallation
Installation of drain hose
ca.
ca.
100 cm
145 cm
?
max.10cm min.60cm
ca.
When
installing the drain hose sink,
it tightly with a string.
secure
105 cm
?
Proper securing
of the drain hose will
protect the floor from
water
damage
due to
leakage.
Laundry tub
ca.
100 cm
Hose
ca.
Retainer
145 cm
Tie
100cm
min. 60cm
max.
ca.
?
The drain hose should not be
higher than
?
100
Proper securing
cm
min.60cm max.10 cm
105 cm
?
strap
placed
above the floor.
of the drain hose will
protect the floor from damage due
water
100cm
min. 60cm
max.
to
leakage.
When the drain hose is too
long,
do not
force back into the washer. This will
cause
abnormal noise.
9
I
?
nstallation
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
floor
the
appliance
on a
solid and level
surface, preferably in
of
a corner
room.
2. If the floor is uneven,
feet
adjustable
insert pieces
Make
sure
as
adjust the
required. (do not
of wood etc. under the
that all four feet
are
feet)
stable
and
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
that the
Adjustable feet
Higher
a
Lower
Adjustable feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
move
the
up and down at
all. (Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
10
C
?
are
before
washing
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that
can
be washed with the
same
wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
causing discoloration
lightly soiled one.
can occur
soiled items with
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
3.
Caring
?
before
of white etc. If
do not wash
possible,
heavily
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets to
make
sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
A dding detergent
?
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
recommended amount,
occur
used more than the
many suds can
and this will decrease the washing result
too
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
(Causing
a
detergent only for the front
washer.
Detergent usage
for water
?PreWash+MainWashU
motor.
may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
the last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
directly
12
on
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
the clothes
at
F
?
unction
Recommended
according
courses
Fabric
to the
laundry type
Maximum
Proper
Program
Energy
Type
First check if
Load
Temp.
laundry
is machine
in
kWh
Minutes
Pre Wash
Time Save
95˚C
washable.
Rinse+
(white cotton, linen
sheets...)
Cotton
Time
in
Option
Rating
2.74
158
Rating
1.33
154
Less than
0.45
88
0.41
58
0.28
58
0.03
57
0.35
30
Crease Care
towel and
Color fast gaments
Pre Wash
(shirts, night dresses,
pajamas...)and lightly
60˚C
Time Save
(Cold, 30˚C,
40˚C)
Rinse+
soiled white
Crease Care
cotton(underwear...)
Synthetic Polyamide, Acryic,
Polyester
Delicate
Delicate
laundry
easily damaged
(silk, curtains...)
Wool
Machine washable
woolens with pure
new wool only
Hand
"Hand Wash" marked
Wash
delicate and wool
laundry
Colored
Quick 30
which is
Laundry
lightly soiled
fast.
Pre Wash
:
If the
Pre Wash
40˚C
(60˚C, Cold,
30˚C)
Time Save
Rinse+
Time Save
(40˚C, Cold)
Rinse+
30˚C
Time Save
(40˚C, Cold)
Rinse+
Cold(30˚C,
40˚C)
Time Save
laundry is heavily soiled, "Pre
Synthetic Program.
kg
Crease Care
30˚C
30˚C(40˚C,
Cold)
3.5
Rinse+
Less than
3.0
kg
Less than
2.0
kg
Less than
2.0
kg
Less than
Rinse+
2.0
kg
Wash" Cotton is recommended. Pre Wash is available in
Cotton and
Rinse+: Used to introduce
an
additional rinse, which may assist in
removing traces
of
detergent
residue.
13
H
ow
to
use
washer
1000
95˚C
800
60
400
40
No
30
Spin
Rinse Hold
Spin
1. Cotton
?
Press the
Power(
?
Press the
Start/Pause(
?
) button
Wash
:
main wash
-
Rinse
:
3 times
to start.
) button.
?
?
-
-
Program : Cotton
14
Option
Temp.
Selecting
Press the
Power(
) button
to start.
Select the conditions which you want to
use, by pressing each button.
selecting the each conditions, please
refer to the page15~page20
Spin : 1000 rpm [WD-1013F]
800 rpm [WD-8013F]
650 rpm [WD-6513F]
Water temperature
Crease Care
For
?
-
Time Save
on.
Initial condition
-
Rinse+
Cold
2. Manual
automatically
selected upon power
Pre Wash
:
60˚C
Press the
Start/Pause(
) button.
H
ow
to
use
washer
1000
95˚C
800
60
400
40
No
30
Spin
Rinse Hold
Button
:
Button
:
Power
Program
Button
:
Start/Pause
Rinse+
Time Save
Crease Care
Cold
Option
Temp.
Spin
(1)
(2)
(3)
Pre Wash
(4) Button : Spin
(5) Button : Temp.
(6) Child Lock
(7)
(8)
Button
:
Button
:
Option
Option
Option
Pre Wash
Rinse+
Time Save
Crease Care
2. Time Save
?
This
of
?
Option
To
a
option
can
be used to reduce the time
wash program.
this
use
button
option press the
Time Save
before the wash program is
once
started.
?
By pressing the Option button, all
Option functions may be selected.
?
This
option
is not available with Quick 30
program.
-
-
-
-
Pre Wash
Time Save
3. Rinse+
Rinse
?
+
Crease Care
removing
?
If the
laundry
course
?
is
rinse, which may assist in
traces of
heavily soiled,
"Pre Wash"
is effective.
are
residue.
the rinse time
increased.
4. Crease Care
?
Pre Wash is available in Cotton and
detergent
By selecting Rinse+ function,
and the rinse water
1. Pre Wash
?
Used to additional
If you want to prevent crease, select this
button with spin speed.
Synthetic.
The
required lamp
identification.
will
light up for
15
ow
H
to
use
washer
Spin
650
800
1000
500
600
800
400
400
400
No
No
No
Spin
Rinse Hold
Spin
Spin
2. No spin
?
Rinse Hold
Rinse Hold
If
spin is selected,
draining water.
no
The
required lamp
identification.
?
Spin
Spin
[WD-6513F]
[WD-8013F]
By pressing
can
the
Spin button,
[WD-1013F]
the
spin speed
3. Rinse Hold
?
be chosen.
?
Spin speed
program
?
as
is available
according
to the
follows.
WD-6513F
-
-
Spin 400 500
Delicate/Wool/Hand Wash /Quick 30
400 500 650 Rinse Hold No
?
Cotton/Synthetic
800 Rinse Hold No
-
Spin 400 600
Delicate/Wool/Hand Wash /Quick 30
400 600 800 Rinse Hold No
?
Spin
WD-8013F
-
Spin
WD-1013F
-
Cotton/Synthetic
1000 Rinse Hold No
-
Spin 400 800
Wool/Quick 30
400 800 1000 Rinse Hold No
-
Hand Wash/Delicate
400 800 Rinse Hold No
16
Is selected
by pressing the spin button
repeatedly this function leaves clothes in
machine; suspended in the water after a
rinse without entering into spin.
To
proceed through
Spin
Spin
to
a
drain
or
spin,
the
once
the rinse hold function is completed.
Press the program button, than spin button
untill the required program is selected.
(Spin
Cotton/Synthetic
650 Rinse Hold No
light up for
Spin
1. Spin selection
?
will
the washer stops after
The
or
Pump)
required lamp
identification.
will
light up for
to
ow
H
use
washer
Water Temp.
1. Child Lock
?
?
95˚C
By pressing
the
Temp.
40
30
by pressing and
holding
Temp. and the Option
button simultaneously.
can
selected.
Cold
-
Cold
-30˚C/40˚C/60˚C/95˚C
(All program lamps blink)
?
1. Water Temperature
-
-
Option
Temp
Temp.
?
be set
the the
button, the water
temperature can be
60
Child Lock
Water temperature can be selected
below according to the program.
?
as
When child lock is set, all buttons
except power button.
To deactivate Child Lock
Temp.
again.
Cotton
60˚C 95˚C Cold 30˚C 40˚C
and the
Option
are
inoperable
system, press the
button
simultaneously
Synthetic
40˚C 60˚C Cold 30˚C
-
?
-
Hand Wash
Cold 30˚C 40˚C
The
more
detailed
To
change
to the desired program, whilst
in child lock mode.
1. Press both the
required temperature lamp
identification.
For the
Option
Temp
Delicate & Wool & Quick 30
30˚C 40˚C Cold
will
light up for
information, please refer
together
once
Temp.
again.
and the
Option
2. Press the Start/Pause button.
3. Select the desired program and press
the Start/Pause button
to the page13.
Child Lock
again.
Change
the desired
program
Temp
Temp.
Option
If you choose to lock the buttons on the control
to prevent tampering this function
assembly
may be selected.
?
Option
The child lock
is
errors occur.
be set at any time and it
canceled when operational
can
automatically
Also Child Lock works when
power is off.
NOTE
?
?
If the program lamps are blinking
simultaneously after the power off or the end
of the washing, the child lock mode is set.
Cancel the child lock mode by pressing the
Temp. and the Option button simultaneously
for 3 seconds.
17
H
to
ow
use
washer
Program
?
8 programs
are
available
according
to the
laundry type.
?
Lamp will light
up to indicate selected program.
(Program)
2. Course
1. Program
?
-
When Start/Pause button is
-Cotton
-Wool
cotton program is
-Synthetic
-Hand Wash
-Delicate
-Quick 30
By turning
selected in
pressed, the
automatically selected.
Program dial, the program is
order of "Cotton Synthetic
the
Delicate Wool Hand Wash Quick 30
Rinse+Spin Pump".
Regarding to the laundry type for each program
Please refer to the page13.
18
-Rinse+Spin
-Pump
ow
H
to
use
washer
Start/Pause
Power
1. Power
1. Start
?
?
This
Start/Pause( ) button is used
wash cycle or pause the wash cycle.
to start
If
temporary stop of wash cycle is needed,
press the
?
When in
Start/Pause(
?
)
after 4 minutes.
at the end of the wash
cycle.
When the Power button is
pressed,
the
for Cotton program. And
the other initial conditions as follows.
?
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
?
button.
Pause, the power is turned off
automatically
on
2. Initial Program
2. Pause
?
Press the Power button to turn power
and off
washer is
ready
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause( )
button and then the washer will proceed.
Initial program
[WD-6513F]
-Cotton
Program/Main Wash
rpm/60˚C
Normal Rinse/650
[WD-8013F]
-Cotton
Program/Main Wash
rpm/60˚C
Normal Rinse/800
[WD-1013F]
-Cotton
Program/Main Wash
rpm/60˚C
Normal Rinse/1000
19
H
ow
to
use
washer
Time Left
?
Recommended program
Cotton 95˚C
-
-
-
-
-
-
?
around 2 hours and 38 minutes
around 2 hour and 34 minutes
Synthetic
around 1 hour and 28 minutes
Delicate
:
around 58 minutes
Wool
:
around 58 minutes
Quick 30
-
:
manufacturer.
:
Hand Wash
-
?
:
Cotton 60˚C
-
by
:
around 57 minutes
:
around 30 minutes
Rinse+
Spin
Pump
around 1 minute
The
:
:
around 19 minutes
time may vary by the amount of
and
other washing conditions.
temperature
If
an
washing
unbalanced load is detected
or
the wash time may be extended.
(Max. increasing time is 45minutes.)
20
laundry,
if the suds
water pressure, water
removing program operates,
M
aintenance
Before
cleaning
the washer interior,
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
?
The water inlet filter
-
Rinse+ and Crease Care
detergent
-
lamps will
blink
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
?
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain
using
any threads
or
Open the lower cover
cap( )byusinga
finger Turn the drain
plug( )topullout
the hose.
2.
in the
smooth
laundry.
running of your
machine.
the drain and then open the pump filter to
remove
whatever
objects.
Be careful when
1.
objects left
ensure
draining
if the water is hot.
Unplug the drain plug ( ),
allowing the water to flow out.
this time
water
use a
flowing
vessel to
on
3. Remove any
At
prevent
to the floor. When
foreign
cleaning,
turn the
)to
the
plug (
the pump filter
close the lower
( )
( ). After
pump filter ( )
clockwise and insert the drain
water does not flow any more, turn
open to the left.
material
from the pump filter
original place.
cover
cap.
3
1
3
2
2
21
aintenance
M
?
Dispenser drawer
After
?
?
?
a
while
and fabric softeners leave
detergents
It should be cleaned from time to time with
a
jet
of
a
deposit
running
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
water.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
?
The drawer
Detergent
can
be cleaned
?
with
occasionally
The
washing
?
?
recess
which should
old toothbrush.
replace
the drawer and
run a
drum
If you live in a hard water area, limescale may
seen and thus not easily removed.
Over time the build up of scale
be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
?
?
recess
also accumulate inside the
continuously
clogs appliances,
build up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
Although
the
washing
If you
use
descaling agents, dyes
or
bleaches, make
sure
they
kept
places where
in check these may have to
of rust
can
be caused
Remove any
Never
22
use
spots with
steel wool.
a
stainless steel
damage part
are
of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler may contain chemicals that may
it cannot be
washing
machine.
machine
aintenance
M
?
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and
a
neutral
non
abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
damp
cloth.
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
opening,
flexible
?
a
Remove hard water
glass.
deposits using only cleaners
labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
freezing
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
and door
hot water.
through complete cycle using
Repeat process if necessary.
NOTE
gasket
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV) antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
dispenser
8. Store washer in
9. To
remove
through
a
an
for 1minute to drain out all water.
expelled.
dry the
drawer drain and
drum
dry
interior, and close the door.
excessive water from the compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
T roubleshooting guide
This
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop washer
and check drum
and drain filter.
If noise continues after washer
pump.
is
restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
redistribute wash load.
If not removed
Have all the transit bolts and
packing
been removed?
Are all the feet
the
If sound continues, washer is
probably out of balance. Stop and
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
is not
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
hose(s)
are
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse
breaker
blown, circuit
tripped,or
a
power
outage has occurred.
Reset circuit breaker
Do not increase fuse
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
Turn
by a qualified electrician.
on water supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
25
T roubleshooting guide
Possible Cause
Symptom
Rinse+
?
Water
?
Water
Crease Care
?
?
Pre Wash
Time Save
1000
(800) (650)
800 (600) (500)
400 (400) (400)
No Spin
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
are
Check another tap in the house.
Fully open tap.
Straighten hose(s).
kinked.
hose(s)
Solution
clogged.
Check the filter of the inlet hose.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
Rearrange
spinning
appliance
or clogged.
clogged.
has
an
imbalance
detection and correction system. If
individual heavy articles are loaded
Rinse Hold
(ex.
bath mat, both robe,
or
straighten the
drain hose.
2 similar items to
help
load to allow proper
etc.) this system
interrupt the
may stop spinning
spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry
to balance the load and repeat the spin
cycle.
or even
?
95˚C
Pre Wash
Rinse+
Time Save
Crease Care
Close the door.
60
40
?
30
Cold
Is the door
If "door error" is not released, call for
opened?
service.
95˚C
60
Unplug the
40
service.
power
plug
30
Cold
Pre Wash
Rinse+
Time Save
Crease Care
95˚C
Water overfills due to the
?
Water level
?
Over load in motor.
Time Save
sensor
Cold
95˚C
800
60
400
40
No
30
Spin
Rinse Hold
26
Cold
Close the water tap.
Unplug the power
Call for service.
30
1000
faulty water
valve.
Pre Wash
60
40
?
has malfunctioned.
plug.
and call for
T
of Warranty
erms
What Is Not Covered:
?
?
?
?
Service
to your home to teach you how to use the
trips
If the
product
rating plate.
is connected to any
voltage
product.
other than that shown
the
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
or
change the set-up of the product.
by pests for example,
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
of
Correcting
or
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
by the
owner's manual.
foreign objects / substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
?
?
?
Replace
or
correct house
Correction of unauthorized
Incidental
possible
?
fuses in
If this
or
wiring
or
correct house
plumbing.
repairs.
consequential damage to personal property
appliance.
caused
by
defects with this
product
is used for commercial purpose, it is not warranted.
Public
(Example
places
center, dormitory)
:
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
P/No.: 3828ER3012H
Download PDF