LG | WF-T502A | LG WF-T502 Owner’s Manual

시방;
표 1,5,7,8,9,10,11,12,13,
14,15,16,17,18,19,20,21,23,
26,27P.
OWNER'S MANUAL
MODEL
:
WF-T502A, T552A
WF-T652A, T752A
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of
the life of your washer. You will find many answers to
common problems in the Troubleshooting section. If you review our chart of
Troubleshooting Tips first, you may not need to call for service at all.
time and money
FEATURES
over
.........................................................................................
3
IMPORTANT SAFETY PRECAUTION................................................ 4
MACHINE PARTS............................................................................... 5
INSTALLATION
...................................................................................
6
AUTOMATIC AND MANUAL PROGRAMMING...................................8
NORMAL WASH PROGRAM.............................................................10
SPEEDY/HEAVY WASH PROGRAM
WOOL/SOAK WASH PROGRAM
...............................................
.....................................................
DELAY START WASHING PROGRAM
SELECTABLE WASHING METHODS
WASHING PROCEDURE
............................................
..............................................
.................................................................
LOAD SIZE AND DETERGENT
........................................................
HOW TO USE THE BLEACH AND THE SOFTENER
CHILD LOCK / WASH OPTION
MAINTENANCE
......................
........................................................
................................................................................
12
14
16
18
20
21
22
23
24
TROUBLE-SHOOTING GUIDE......................................................... 26
SPECIFICATIONS
2
P/No.3828EA3010Q
............................................................................
27
FEATURES
CAUTION
"Turbo Drum" washer doesn't operate while the lid is open. If the lid is
during the wash, rinse and spin cycles, the operation stops for safety.
Fuzzy logic
A load
set
sensor
&
a
control
micro processor in the controller detect
optimum washing
conditions such
technology in
electronic control system provides
the best washing performance.
as
water
The most advanced
Turbo drum
opened
START
laundry
load and
level, wash time etc.
SENSING
SETTING
Laundry Sensor
Optimum
Washing
Water Level Sensor
Condition
WASHING
AUTO
POWER
OFF
washing
The
in
in
"punch + 3" washing wings and the washing tub turn
opposite directions. This makes the water current flow
two directions which improves washing efficiency.
The wash
which
small
performance is also improved by the water
continually cascades into the wash bowl from
waterfalls in the washing tub.
Innovated washing wings
Three small
washing wings generate strong and
sharp washing currents to clean laundry uniformly.
Adjusted vertical movement and rotating direction
of the washing punch reduces laundry entanglement and improves washing power.
3 Step washing
3 step
washing produces
tangling.
the best
washing performance
with low
Rubbing
Shaking
Rubbing
and
and
Shaking
Disentangling
Device for removing lint
Lint filter catches lint and thread
washing
to make the
laundry
generated during
clean.
3
P/No.3828EA3010Q
Never touch the clothes in the bowl
operation.
Wait until the bowl
Even when
during
stops rotating.
rotating slowly, the clothes
fingers, which is
may wrap around your
dangerous.
Don't
The
is not intended for
appliance
young children
or
use
by
infirm persons without
supervision.
Young children should be supervised
to ensure that they do not play with the
appliance.
Don't put hand(s) under the washer
during operation.
Rotating parts may injure your hand(s).
Keep washer away from fire(a heater,
burning cigarette, etc.).
After
cals into the washer.
The washer may be deformed
Turn the POWER button "OFF" at the
An
may break out.
put kerosene, gasoline, benzine,
thinner
or
clothes
containing
explosion might
these chemi-
result.
or a
fire
washing
Close the water
tap.
wall power outlet, if you will not be using
the machine for a long period of time.
To
prevent
water
leakage, fire,
electric
shocks,
OFF
OFF
etc.
OFF
Don't rest
heavy objects
apply
on or
pressure to the lid.
Don't bend the lid forcibly,
as
it may
break.
exposed
Switch and/or
Plastic
panel damage
or a
mal-
function may result.
Don't use excessively
(above 70°C)
Plastic
Don't press the switches and/or the panel
a sharp object, i.e mechanical pencil.
with
hot water.
parts of the washer may be
deformed
or
damaged.
spin-dry starched clothes.
spin by mistake, operate the washer
without load with only half the normal
amount of detergent.
Don't
The rubber
to the
bowl may soil
other clothes.
sunlight.
be deformed and/or fade.
If
Otherwise, starch
P/No.3828EA3010Q
to direct
parts and the painted cabinet may
Don't
adhering
4
Don't install the washer where it would be
use
strong alkaline detergents.
parts may be damaged.
MACHINE PARTS
Powder
HOT WATER SUPPLY
HOSE
detergent
delayed
washing
box for
COLD WATER SUPPLY
HOSE
SOFTENER INLET
Make sure the water
does not leak.
Softener will automatically
flow into the tub.
LINT FILTER
INLET HOLE FOR
Clean regularly it to remove
Cumulated lints from the
clothes.
BLEACH
FUNCTION SELECTOR
START/PAUSE
BUTTON
Use to start or stop the
washing
porarily.
DRAIN HOSE
Check if the drain hose
is located in the laundry
tub before operating the
washing machine.
machine tem-
WASHING WINGS
Vertical movement of
washing punch can be
operated when a sufficient
amount of laundry is deposited.
POWER PLUG
If the supply cord is
damaged, it must be
replaced by the manufacturer
Set the proper water level,
an excessive amount of
water may increase
entanglement of laundry.
or
its service
agents
or
similarly qualified
person
in order to avoid a hazard.
LEVELLING LEGS
Use to level the
washing
BASE
machine for correct balance
&
spin operation.
Accessories
Height adjustment
plate
Inlet hose
Drain hose
Silent
cover
(WF-T502A, T552A)
UP
1 Each for cold and
2 Pieces
hot water
5
P/No.3828EA3010Q
INSTALLATION
Connect the drain hose
Connect the drain hose to
Attach the
the outlet of the drain pump
located at the rear of the
And then
clip to the drain hose.
push it toward the body
of the washing machine as
indicated by the arrow.
machine.
washing
Place the hose
laundry
Do not
tub
guide
over
the stand
or
the
pipe.
extension hose.
use an
Within 50mm
NOTE:
Never
Hose Guide
down the drain
lay
the drain hose is
hose,
as
water will be
Be
sure
To
prevent syphoning, the drain hose should
from the end of the hose
The
"
routed
so
discharged.
it will not kink
or
0.9~1.2m
not extend more than 50 mm
approximately
0.9~1.2mfrom the floor.
machine is to be connected to the water mains
should not be reused
Drain Hose
lift from the sink.
guide.
should be
discharge height
Washing
properly
using
new
hose-sets and that old hose-sets
"
Flooding drainage
Your machine
requires
a
floor
drainage slope (or hole)
that will SAFELY DISPOSE of the FULL FLOW of
any water that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in an area with a
drain hole
that will
(or slope)
prevent any possibility of
water
to floor
damage
coverings
or
property.
Connect the inlet hose
Check that
sealing
washers
are
firmly
seated.
MACHINE
Attach the curved end of the hose to the inlet valve of the
machine; Tighten the coupling
nuts
securely by
hand.
washing
(Fig. 1)
END
TAP
SEALING
Attach the
straight end of the hose to the tap.
Tighten the coupling nuts securely by hand. (Fig. 2)
Another hose
Turn
can
be attached to hot inlet valve and
WASHER
TWIST
TAP
tap.
WASHER
taps and check for leaks. Tighten the coupling nuts
firmly if there is any leakage. If water pressure is strong, close the
water tap completely then open it slightly.
on
the
CAUTION
Do not install the washer where it is
directly exposed
END
SEALING
INLET
VALVE
INLET
HOSE
(Fig. 1)
to
sunlight, wind,
(Fig. 2)
rain etc.
the power cord of this washer into a properly installed standard power point that is switched & earthed.
Your machine requires a floor drainage slope (or hole) that will SAFELY DISPOSE of the FULL
Plug
FLOW of any water that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in
a
drain hole
(or slope)
Permissible water
that will
prevent any possibility of
water
damage to
floor
coverings
an area
or
with
property.
temperature : Max 70°C(160°F)
Permissible water pressure : Max 116psi (800kpa, 8kg/cm2), Min 4psi (30kpa, 0.3kg/cm2)
If water temperature & pressure is greater than above, it may cause damage to the machine. If you
have uncontrolled water temperature & pressure you should fit a temperature & pressure relief valve
that water temperature & water pressure remains within the safe limits. Consult a plumber
electrician if you are unable to adjust water temperature and pressure.
Do not over tighten the coupling nuts with a tool. Inlets are plastic : Do not strip or crossthread.
to
ensure
or
6
P/No.3828EA3010Q
SETTING SCREW
Install the silent
Insert the silent
back of
washing
cover
to be
firmly
machine and
CAUTION
Install the
SILENT BASE
cover (WF-T502A, T552A)
fixed from the
screw
it
SILENT COVER
(1pcs)
UP
Do not install the washer where it is
directly exposed to sunlight, wind, rain etc.
a properly installed standard power point
the power cord of this washer into
that is switched & earthed.
Plug
washing machine
on a
flat and firm surface.
Install the
washing machine on a level and firm surface.
washing machine more than 10cm from the wall to prevent vibration
The base opening must not be obstructed by carpeting when the washing
machine is installed on a carpeted floor.
Wooden floors may need reinforcing to prevent the normal vibration which
Keep
the
occurs
with
an
noise
during spinning.
unbalanced load.
10cm
CAUTION
Level the
If the
appliance
device the
core
positioned
so
is
supplied
from
extension set
it is not
subject
or
to
or electrical portable outlet
portable outlet device should be
splashing or ingress of moisture.
a
cord extension set
electrical
washing machine
Check the level of the
washing machine using a
spirit
washing cabinet
You can check the level also by visually lining up the
washer with the fills, adjacent walls or cabinets.
level
You
can
on
the side of the
level the washer
using
the A.L
spindle fitted
to the cabinet.
Screw the A.L SPINDLE
legs up or down as required.
height adjustment plates are provided in the accessory bag.
if required to allow for greater adjustment of the legs.
When washing machine does not even out, turn A.L SPINDLE
right or left to be level.
Should the height adjustment exceed the maximum
allowed by the A.L SPINDLE, place height
adjustment plats provided under
the legs as shown in the
diagram.
Additional
1
plate used
2
plates used
3
plates
used 4
plates used
These fit under A.L SPINDLE
UP
DOWN
A.L SPINDLE
7
P/No.3828EA3010Q
AUTOMATIC AND MANUAL PROGRAMMING
Fully automatic control
The
Fuzzy program is used for average
Press POWER ON button.
Close the lid and press START/PAUSE button.
lights will scroll up and down while the
day to day washing.
The water level
Load clothes.
Add
washer is
detergent,
bleach and conditioner
as
working
out the
optimum
water level for your
clothes load.
desired.
Preparation before wash
Sort your
washing
Each load of
washing
washing
into
separate wash loads
should contain
conditions. For
clothing
clothes with very
example, you
dirty work clothes.
Some fabrics
lint collectors and
from other
are
fabrics, which
are
lint
which needs the
same
should not wash delicate
can pick up lint, dirt and colour
producers. Some examples are
WATER TEMP. SELECTOR
Used to select proper water
temperature of
washing water.
[Warm Hot Cold Warm
(Hot and Cold light on)] mode repeats.
listed below.
LINT COLLECTORS
LINT PRODUCERS
Corduroy
Synthetics
Towels
Permanent press fabrics
Chenille / Candlewick
Make
sure
Nappies
that you wash lint collectors
separately from
lint
producers.
HOT
COLD
WARM
Check if
laundry
is washable in
Be
sure
to remove
keys, pins
laundry.
water.
as
things
such
and coins from the
WASH
OPTION
to kinds of
Wash
oily or dyed laundry
arately.
sep-
Shake loose dirt off before
According
laundry, soiled extent
or washing habit you
can
select suitable
wash
option.
By pressing the button wash option is
changed GENTLE
washing.
SPIN
RINSE
WASH
Wash
fluffy laundry by turning
it inside out.
8
P/No.3828EA3010Q
Wash delicate
ping
them in
a
clothes, wrap-
nylon
net.
EXTRA
EXTRA
repeatedly.
WATER LEVEL
SELECTOR
Use to select the
proper amount of
water in relation to
the
of
weight
laundry.
and
type
Controlled
automatically in
Fuzzy program.
the
Manual control
Other programmes are selected
Press POWER ON button.
as
follows.
Load clothes.
Add
detergent,
bleach and conditioner
as
desired.
Select
temperature, level, process, program and
Close the lid and press START/PAUSE button.
DETERGENT
VOLUME
options
described below.
PROCESS
SELECTOR
DISPLAY
Used to indicate proper
detergent for
as
Used to indicate the
Use to select the desired
amount of
time left of all Processes
each water level.
or
function among SOAK,
WASH, RINSE or SPIN.
reservation.
START/PAUSE
BUTTON
Use to start
washing
porarily.
or
stop the
machine tem-
After 10 minutes in pause
state, the power is
automatically
turned off.
AUTO OFF
WATER DETERGENT
EX-LARGE
LARGE
MEDIUM
SMALL
DELAY
HOUR
TIME
LEFT
MIN.
NORMAL
SPEEDY
HEAVY
WOOL
SOAK
WASH
RINSE
SPIN
AUSE
PROCESS
DELAY START
Used to
reserve
CHILD LOCK
the time
Used to lock
or
unlock
when wash program
ends from now to pre-
the control buttons to
vent wrinkle while you
from
are
away for
a
prevent all the setting
while.
By pressing the button
changes [3 4
5...
12
48
14
16
HEAVY
once more
washing
:
3
step works
at
large
laundry
them
buttons
3] repeatedly.
to
and stain you can select
suitable program
locking, push both
simultaneously
and for unlocking push
child.
For
the time
According
yourself.
By pressing the button
washing program
changes in order of
[NORMAL SPEEDY
a
being changed by
PROGRAM
SELECTOR
in
process.
POWER BUTTON
Power is
automatically
cut after the wash pro-
gram finishes.
WOOL
NORMAL] repeatedly.
and medium water level of NORMAL and HEAVY program.
9
P/No.3828EA3010Q
NORMAL WASH PROGRAM
Use the Normal program for normal dirty laundry.
All conditions such as water level, wash time, rinse and
spin
time
are
automatically
selected
1
by microcomputer.
Press the POWER button.
All you have to do is press the START/PAUSE button.
Check to see if everything is ready.
Preset program
Deep1
gives
:
rinse
Warm wash water
...
see
the
(cold or hot water
following table 1.)
can
be set
optionally
Fuzzy wash
power is
indicator
lamp
illuminates when the
on.
Table 1. WASH WATER TEMPERATURE GUIDE
USED FOR
WATER TEMPERATURE
White and colour fast cottons, linens with heavy or normal soil.
Permanent press & synthetics with heavy or oily soil.
Hot
Dark
Warm
or
non-colour fast fabrics. White & coloured
synthetics.
Permanent press with normal or light soil.
Wool is only selected with warm.
Lightly
Cold
soiled fabrics.
Table 2. FILL TEMPERATURE OF EACH CYCLE FOR PROGRAM
For each program, the
washing
machine
automatically
selects
a
suitable fill water
temperature.
FILL TEMPERATURE
PROGRAM
APPENDIX EXPLANATION
WASH
Normal, Heavy,
Speedy
Wool
A wash
temperature
RINSE
Fill
HOT
WARM
COLD
COLD
WARM
P/No.3828EA3010Q
Fill cold for rinse is not able to
energy
WARM
to be selected is illuminated
10
temperature for wash is able
to
change
washing style.
because of
change
saving.
Fill temperature is not able to
transformation.
during
for your
a
complete cycle
on
change
to
the control
protect laundry
panel.
2
in the wash bowl.
Put
laundry
Put
detergent
4 the display
or
in the wash bowl
instruction of
3
as
indicated
detergent
on
manufac-
5
Press the START/PAUSE button.
Close the lid.
turer.
Electric power is automatically out after
program finishes.
washing
11
P/No.3828EA3010Q
SPEEDY WASH PROGRAM
Use this program for
soiled
washing slightly
laundry.
This program is economical because of its short
Adjust water
level
Preset program
according to the amount
gives: -4 minutes wash
-Deep1 rinse
-2 minutes spin
of
washing
laundry.
the power button
1Press
time.
AUTO OFF
-Medium water level
-Warm water
(Cold
or
hot water
can
be set
optionally)
HEAVY WASH PROGRAM
Use this program for
overalls, jeans
washing heavily
soiled durable
garments such
as
etc.
All conditions such
as
water
level, wash time and spin time
are
automatically
1Press
the power button
sellected
Preset
by microcomputer.
program gives : -Deep
AUTO OFF
2 rinses
-4 minutes
spin
-Warm water
(Cold
or
hot water
can
be set
optionally)
4Press
the START/PAUSE
button.
HOUR
TIME
LEFT
MIN.
START
CAUTION
Do not wash
DELAY
an
electric mat
12
P/No.3828EA3010Q
or
blanket.
2
PROGRAM
[CYCLE] selector
3
NORMAL
SPEEDY
HEAVY
WOOL
PROGRAM
After
closing
the lid press the START/PAUSE
button.
Set the program selector to
2
Put
laundry
[SPEEDY] by pressing
Power goes off
finishes.
it.
in the wash bowl.
3
PROGRAM
automatically
after wash
[CYCLE] selector
NORMAL
SPEEDY
HEAVY
WOOL
Set the program selector to
it.
[HEAVY] by
pressing
Put
detergent
5 display
or
in the wash bowl
instruction of
as
detergent
indicated
on
the
manufacturer.
6
Close the lid.
WATER DETERGENT
EX-LARGE
LARGE
MEDIUM
SMALL
Electric power is
washing
automatically
out after
program finishes.
13
P/No.3828EA3010Q
WOOL WASH PROGRAM
Use this program for
washing
Do not wash woollens with
a
washable
woollens, less than 2.0kg.
dry cleaning
Do not set water level to medium
1Press
label attached.
the power button
below.
or
Wash clothes with buttons and accessories inside out.
Preset program
gives:
-6 minutes wash
-Deep
-1 minutes soft
-Large
AUTO OFF
2 rinses
spin
water level
-Warm water
NOTE
When you wish to
:
change washing cycles,
select them
manually.
SOAK WASH PROGRAM
Use this program for
washing heavily soiled laundry after soaking.
provides the best washing effect.
this program for washing laundry that may discolor.
This program
Do not
use
Preset program
gives:
-60 minutes
-Deep
14
P/No.3828EA3010Q
the power button
soaking
1 rinse
-Warm water
(Cold
1Press
or
hot water
AUTO OFF
can
be set
optionally)
2
PROGRAM
[CYCLE] selector
3
NORMAL
SPEEDY
HEAVY
WOOL
OGRAM
Press the START/PAUSE button after
closing
Set the program selector to
2
PROGRAM
[WOOL] by pressing
it.
[CYCLE] selector
the lid.
Power goes off automatically
after wash finishes.
3
SOAK
WASH
RINSE
SPIN
After
the lid press the
START/PAUSE button.
Set the program selector to
all the lights turn on.
[SOAK] by pressing
it 6 times until
closing
Power goes off
finishes.
automatically
after wash
15
P/No.3828EA3010Q
DELAY START WASHING PROGRAM
1Press
the power button ON.
2
Select program.
3
NORMAL
SPEEDY
HEAVY
AUTO OFF
WOOL
Set the time.
DELAY
HOUR
TIME
LEFT
MIN.
DELA
AR
Select
a
desired
Select how many hours from
now you would like your wash
Program.
If not selected NORMAL program will be provided.
The
to finish.
When you
delay time
start for WOOL is not
delay
possible to prevent damage
laundry.
to
push the button
changes [3 4
the
5... 12 14 16... 48
3] repeatedly.
EX)
It's 7
a.m. now.
If
16
P/No.3828EA3010Q
you'd
like your wash to finish at 9 p.m. set the time
DELAY
HOUR
TIME
LEFT
MIN.
14 hours
:
as
in the
figure
7 a.m.~9p.m.
below.
4
Put laundry and press the
START/PAUSE button.
TIME
LEFT
5
Deposit detergent.
Close the lid.
6
MIN.
Put laundry and press the
START/PAUSE button. The
washer
senses
laundry
and
mended
the amount of
displays recomamount of detergent.
The washer does not
amount of
laundry
sense
at WOOL
the
Pull the
detergent box forward
deposit proper amount of
detergent, then push back the
If the lid is not
and
closed, the machine generates
box.
If the lid is
Concentrated
detergent
is not
an
completely
alarm sound.
opened
START WASHING
suitable for DELAY START
DELAY
can
not
proceed.
WASHING.
program.
CAUTION
A wet
detergent box may cause the detergent
use powdered hand soap.
to
clump together.
Do not
If the lid is open, the machine will not
operate and
an error
signal
will sound.
When you would like to cancel this program press the POWER button OFF.
17
P/No.3828EA3010Q
SELECTABLE WASHING METHODS
WASHONLY?
?
?
When wash
Press the power
button.
liquid
Set the WASH
pressing
is to be used twice.
position by
PROCESS
button.
RINSEONLY?
?
?
Press the power
button.
Set the RINSE
pressing
position by
PROCESS
the lid.
?
?
pressing
button.
tub does not pump
already
Rinse ends.
PAUSE button after
time the water in the
the lid.
(At this
tub does not pump
or
spin
clothes
drying.
position by
PROCESS
out.)
been washed.
When it is desirable to drain water from the bowl
Set the SPIN
(At this
Press the START/
closing
before
P/No.3828EA3010Q
time the water in the
When it is desirable to rinse clothes which have
DRAINorSPINONLY?
18
Wash ends.
PAUSE button after
closing
button.
Press the power
button.
Press the START/
Press the START/
PAUSE button after
closing
the lid.
Spin
ends.
out.)
WASH&RINSE?
?
?
When it is not desirable to
spin
clothes in order to avoid wrinkles.
SOAK
WASH
RINSE
SPIN
PROCESS
Press the power
button.'
Set the WASH & RINSE
Press the START/
position by pressing
PAUSE button after
PROCESS button.
closing
Wash and rinse ends.
(At this
the lid.
time the water in
the tub does not pump
out.)
RINSE&SPIN?
?
?
When it is desirable to rinse and
spin
clothes which have
already
been washed.
SOAK
WASH
RINSE
SPIN
PROCESS
Press the power
button.
Set the RINSE & SPIN
Press the START/
position by pressing
PAUSE button after
PROCESS button.
closing
Rinse and
spin
end.
the lid.
19
P/No.3828EA3010Q
WASHING PROCEDURE
Here is the
description
of
washing cycle programmed
Level
washing
machine memory.
Time
Auto-Water
Programmed
Wash Cycles
into the
Washing
Setting
Rinsing
Spinning
required
WF-T652A, T752A
WF-T502A, T552A
EX-LARGE
NORMAL
SMALL
SPEEDY
MEDIUM
EX-LARGE
NORMAL
HEAVY
(PROCESS)
SMALL
WOOL
LARGE
EX-LARGE
SOAK
SMALL
INFORMATION
The time
:
for each
required
cycle may differ depending on the water pressure. The time shown
Table is set under the situation of water supply for approx. 3min.per cycle(20 litres per minute
EX-LARGE water level).
The indication shown
Spray
on
the
is the standard time.
by
rinse is carried out rinse
cycle
in accordance with
filling
water.
NOTE:
High water pressure may
if the noise is annoying.
20
P/No.3828EA3010Q
cause
noise
during
the water
supply.
Turn the water
tap
to
adjust water supply
LOAD SIZE AND DETERGENT
Water level and wash bowl
SMALL
Water level will be automati-
cally
selected based
volume of clothes
the
on
LARGE
MEDIUM
EX-LARGE
WF-T652A
WF-T502A
WF-T652A
WF-T502A
WF-T652A
WF-T502A
WF-T652A
WF-T502A
T752A
T552A
T752A
T552A
T752A
T552A
T752A
T552A
in
placed
capacity
the wash bowl in the FUZZY
or
Approx.
44L
the HEAVY programs.
If the movement of the clothes
items until the clothes
move
stops,
freely
Approx.
29L
too much
clothing
Approx.
54L
Approx.
38L
has been
Approx.
64L
Approx.
55L
Approx.
78L
put into the machine. Remove
Approx.
61L
some
around the wash bowl.
Detergent
Use correct amount of
When
washing
detergent according
woollens remember to
to the
use a
detergent manufacturer's instruction.
detergent recommended by Australian Wool
Board
or
New
Zealand Wool Board.
We recommend the
use
of
detergent which
are
low
sudsing
and dissolve
readly
to obtain the best wash
results.
Do not
use
too much
detergent,
Using powdered soap
When
powdered
soap flakes
which may
cause an over
sudsing problem
used the
following procedure
Set POWER button to "ON".
2
After the
3
When the soap flakes
4
Turn POWER button to "ON" and select the desired automatic
add the soap flakes and
are
rinsing efficiency.
flakes
are
1
agitating starts,
and decrease
operate for
should be followed.
2 minutes.
dissolved turn POWER button to "OFF" and load the
menu
laundry.
then press START/PAUSE button.
To dissolve the soap flakes quickly, prepare 5L of warm water and gradually stir in the desired amount of
flakes. Then add to the wash bowl and proceed with your cycle selection.
CAUTION
Since soap flakes are more liable to remain in clothing
and bad odour may occur unless the clothing is rinsed
If
compared to synthetic detergent, yellowing
sufficiently.
soap flakes are directly poured into water at a
excessive amount of soap flakes are used or
temperature, soap content and soap dregs adhere to the inside of the
an
low
the float
Do not
making
the
hose, wash bowl and
laundry dirty.
soap flakes in the following
When the soak wash is used yellowing
use
cases.
or
blackening
may
occur
due to the
long
term
SOAK WASH action.
21
P/No.3828EA3010Q
HOW TO USE THE BLEACH AND THE SOFTENER
How to
When
the bleach agent
use
using bleach, always
make
sure
Pour the
clothes
powdered bleaching agent
only for bleaching.
Pour the
liquid bleaching agent
it is
after
into the
washing
Bleach Inlet
the
separating
Using fabric softener
Spin
bleach.
oxygenated
()
cask.
(For detailed description,
refer directions
on
fabric softener
container.)
basket
Remove the softener cup by pulling out in the direction of the
Put fabric softener into the cup and return it to the orig-
arrow.
inal
position
before
starting the wash.
automatically dispensed
The fabric softener is
at the last rinse
cycle.
Do not add too much softener.
Refer to the softener manufacturer's instructions.
()
Softener
Cup
CAUTION
Don't
softener with detergent. Use softener in last rinse water.
using dispenser, dilute softener(30ml) with fresh water(30ml)
When filling dispenser, do not splash or overfill. It may stain clothes.
Never pour fabric softener and bleach directly on clothes. It may stain them.
If spotting occurs, wet and rub hand dishwashing liquid (or mild bar soap) and
use
When
Opening
the lid
during
the
spin cycle
Do not leave the washer for
The effect of
softening
is
will
more
than
changeble
to
quicken
deposit time, lowering its effect.
a day after depositing fabric softener into the tub.
position
Selectable washes described in page 16 & 17
22
P/No.3828EA3010Q
rewash.
the softener
of inlet box and wash bowl.
are
not
designed
to be used with the fabric softener.
CHILD LOCK OPTION
To
guard against
unwanted alteration of
cycle settings during operation
the child lock
option
may be utilised.
HOW TO LOCK
1Press
the POWER
Press the START/PAUSE
2
button
after all
set
key
conditions
washing
according to the
are
manual.
3
Press both the PROCESS
key and the
key simultaneously while
wash is proceeding, then all the keys
are locked until completing the wash
program or unlocking them.
PROGRAM
"CJ" and the remaining time are
altematively shown on the display.
HOW TO UNLOCK
If you want to unlock
during
wash press both the water
temp key and the
water level
key simultaneously again
WASH OPTION
One
or more
wash
options
changed
Wash program is
EXTRA WASH
:
can
as
be selected for every washing program.
according to sellected wash options.
follows
Gives additional 3 min wash
eg.)
If extra wash is selected for loads that
Wash time is
EXTRA RINSE
:
Gives additional
eg.)
:
Gives
eg.)
one
deep
deep
require
during the heavy program.
(normal time)
extra water
to 24 min instead of 21 min.
rinse
If extra rinse is selected in the
one
GENTLE SPIN
changed
fuzzy
program it
gives
two
deep
rinses instead of
rinse.
gentle spin
instead of normal
spin.
If both extra wash and extra rinse
are
selected for loads that
require
extra water
the
during
heavy program. It gives 24 min wash instead of 21 min normal wash
and two deep rinses instead of one normal deep rinse.
23
P/No.3828EA3010Q
MAINTENANCE
CLEAN THE FILTER IN THE VALVE
Clean the filter when water
1Disconnect
supply
the power cord.
2
into the tub appears
dirty
or
the inlet valve is
Pull out the filter from the
3
inlet valve.
Use
dirt.
a
clogged
with
impurity.
tooth brush to
Replace
get rid of
it.
CLEAN THE LINT FILTER
out the waste thread collec-
1Pull
tion net from the tub in the direction of the
arrow
2
Turn inside out to
rid of filth.
get
3
Insert it into the
original
location.
below.
CLEAN THE CABINET
Wipe
with
stains from the cabinet and the control
a
soft cloth.
panel
CAUTION
Do not pour water directly on the cabinet.
Do not wipe the cabinet with benzine, thinner,
cleanser, alkaline detergent or wax.
Do not rub the cabinet with
When you use
instructions.
24
P/No.3828EA3010Q
a
chemical
a
scrubbing
dustcloth,
brush.
follow the
CLEAN THE PUMP CASING
1
Unfasten 2
screws on
the back
cover.
2
(when drainage is bad)
Turn the cap as indicated
the arrow and unfasten it.
Remove
as
foreign objects
pins, buttons, coins;
by
3
Reassemble the cap as indicatby the arrow and fasten it.
ed
such
etc.
(Bottom view)
CAUTION
Check it
:
over
if water leaks after
(Bottom view)
reassembling.(Rubber ring
is in the
cap)
WHEN THERE IS A FEAR OF FREEZING
1 Close the
2 Hold the
water
water
taps and
supply
remove
hoses
as
the water
supply
shown in the
hoses.
drawing
so
that it does
not sag.
3
Set the POWER button to "ON" and the WATER TEMP. to
warm.
4 Press START/PAUSE button and operate the washing machine for
20 seconds.
Water which remains in the water
5 Press START/PAUSE button
6
to
supply
is removed.
stop the operation.
Lower the drain hose and select manual
spin
7 Press START/PAUSE button and operate for
mode.
30 seconds.
Set the POWER button to "OFF".
Drain the water in the bowl and the drain hose.
IF FROZEN
1 Remove the
water
supply hose,
and immerse it in
hot water at approx. 40°C.
2 Pour approx.
2 liters of hot water at approx.
40°C,
into the bowl for 10 minutes.
3
Connect the water
confirm that the
and
drainage
supply hose to the water tap, and
washing machine performs the supply
of water.
25
P/No.3828EA3010Q
TROUBLE-SHOOTING GUIDE
If
an abnormal symbol appears in the display window, check the following before asking for service.
Request for the service center or agent in the case of failure or damage except for the following.
This appliance is fitted with a safety function that automatically stops the operation of the washing machine
when it is exposed to heavy disturbance on the mains.
TROUBLES
No water
CHECK UP
supply
Is
tap turned off?
Is the water
supply
cut off?
Is the
tap frozen?
No drain
Check if electric
Check that the drain
Is the drain hose
Check whether the
power has gone off.
hose is not twisted
hung properly?
drain pump is locked
or
kinked?
No
by foreign objects.
spinning
Is the wash load
unevenly balanced?,
evenly & close the
redistribute the load
Is the lid closed?
lid.
Power failure?
Fuse blown
No power
or
check
circuit breaker?
Is the power button on?
Is the power cord
or switched off?
unplugged
Not
working
Has the START/PAUSE button
been
Is the water shut off?
A
high
Is the water level normal?
pressed?
The power will automatically
shut down after 10 minutes.
level of vibration
and noise
during spin-
ning.
Is the
washing
installed
on a
Others
ASK FOR SERVICE
26
P/No.3828EA3010Q
machine
correctly
firm and level surface?
Inlet water pressure
max
800 KPa
min 30 KPa
H
(115 psi)
(4 psi)
M90-12m Standpie inmuhegtofaps clrhetofmain
1 50m
Alowingfor adjustblef t
Electricity supply
240V
50 Hz sinusoidal
D
Model
W
WF-T502A
WF-T552A
Type
Fully
Washing capacity
5.0
Electrical
See the
ratings
Standard amount of water
(EX-LARGE water level)
5.5
kg
Approx. 61L
Water tap pressure
Weight
D×
(W×
H)
6.5
attached to the
Automatic
WF-T752A
automatic washer
kg
rating plate
Washing system
Outer dimension
WF-T652A
7.5
kg
rear
kg
of the washer
Approx. 78L
reverse
pulsator type
30-800kPa(0.3-8kgf/cm2)
540
×
540
32
×
850mm
kg
590
×
606
×
958mm
41
kg
27
P/No.3828EA3010Q
Download PDF

advertising