LG | WF-T655A | LG WF-T655A Owner’s Manual

P/No.: 3828EA3027K
Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T655A
WF-T755A
Please read this manual
carefully
Retain it for future reference.
before
operating your
set.
P
roduct Features
Washer doesn't operate while the lid is open. If the lid is open
rinse or spin cycles, the operation stops for safety.
during
the
wash,
sensors
The
the
automatically
sensor
detects the quantity of
of water to make the best
quality
washing
the best
FUZZY
sensor
SENSING
Laundry
washing algorithm
automatically
as
detects the
washing
and
technology
laundry load and a microprocessor optimizes
washing time.
AUTO
POWER
OFF
WASHING
Optimum
Washing
Condition
is built into the Electronic Control
System which
ensures
result.
washing
Turbo drum
The
and the temperature and
rinsing, which can give
a user
ideal WATER LEVEL and
SETTING
Sensor
Water Level Sensor
Advanced
for
effect.
conditions such
START
Detergent put by
logic control
A built-in load
washing
a
"punch
+
3"
washing
washing wings
and the
washing tub
turn in
opposite
directions. This makes the water current flow in two directions which
improves washing efficiency.
The wash
performance
is also
improved by
the water which
cascades into the wash bowl from small waterfalls in the
Innovated
washing wings
Three small
to
clean
Adjusted
reduces
3
continually
washing tub.
washing wings generate strong
laundry uniformly.
vertical movement and
laundry entanglement
and
sharp washing
currents
rotating direction of the washing
and improves
washing
action
power.
Step washing
3 step
washing
makes the best
washing performance with
Rubbing and Shaking
Rubbing
Device for
removing
Lint filter catches lint and threads
the
laundry
clean.
low
tangling.
Shaking and Disentangling
lint
generated during washing to keep
the best
Contents
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your washer
a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
properly. Just
in the
Troubleshooting
may not
need
to
section. If you review
at all.
Introduction
Before
our
chart of
Troubleshooting Tips first,
you
call for service
Starting
to Wash
Safety Information
4
Identification of Parts
5
Installation
6
Function Information
8
Preparation Before Washing
9
Use of Water,
Special
Detergent, Bleach and Softener
Guide for Stain Removal
10
13
Function of each Button
14
NORMAL Wash
16
SPEEDY Wash
16
HEAVY Wash
16
WOOL Wash
16
DELICATE Wash
16
SPEEDY SOAK Wash
18
FAVORITE Wash
19
SILENT Wash
20
ECOSAVE Wash
21
Additional Function
DELAY START (RESERVATION) Wash
22
Program
Option Washing
23
Other Useful Functions
24
Maintenance
Maintenance
25
Troubleshooting
Troubleshooting
27
Specification
Specification
28
Washing Programs
4
S
afety
Information
WARNING!
Introducin
Read and follow this safety information carefully.
For your safety, the information in this manual must be followed to minimize the risk of fire
shock, or to prevent property damage, personal injury, or loss of life.
Save these instructions.
WATER HEATER
SAFETY
PROPER
INSTALLATION
or
explosion, electric
Under certain conditions
hydrogen gas may be produced in a water heater that has not been used for
Hydrogen gas can explosive under these circumstances. If the hot water has not
been used for two weeks or more, prevent the possibility of damage or injury by turning on all hot
water faucets and allowing them to run for several minutes. Do this before using any electrical
appliance which is connected to the hot water system. This simple procedure will allow any built-up
hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance
during this process.
two
weeks
Install
or
or more.
store
where it will not be
exposed
to
temperatures below freezing
or
exposed
to
the
weather.
Properly ground
washer to conform with all
governing
codes and ordinances. Follow details in
Installation Instructions.
the
underneath and around your
YOUR
Keep
LAUNDRY
paper, rags, chemicals, etc.
Close supervision is necessary if this
AREA
WHEN USING
THE WASHER
area
play on, with, or inside this or any
Keep washer away from fire.
Use this
appliance only
appliances
free of combustible materials such
appliance is used by
appliance.
or near
lint,
children. Do not allow children to
other
for its intended purpose as described in this Owner's Manual.
moving. Wait until the machine has completely
Never reach into washer while it is
opening
as
stopped
before
the lid.
Do not mix chlorine bleach with ammonia
different chemicals
Do not wash
can
produce
a
or
acids such
toxic gas which may
as
cause
vinegar and/or
rust
remover.
Mixing
death.
dry articles that have been cleaned in, washed in, soaked in, or spotted with
explosive substances (such as wax, oil, paint, gasoline, dry-cleaning solvents,
kerosene, etc.) which may ignite or expolde. Do not add these substances to the wash water. Do not
use or
place these substances around your washer or dryer during operation.
The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully
combustible
or
or
follow the garment manufacturer's wash and
To minimize the
disconnect the washer at
care
instructions.
shock, unplug this appliance from the power supply or
the household distribution panel by removing the fuse or swiching off the
possibility
of electric
circuit breaker before
attempting any maintenance or cleaning.
Pressing Power button to turn off does NOT disconnect the appliance from the
power supply.
Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or
has missing or broken parts, including a damaged cord or plug.
NOTE:
Turn off water faucets to relieve pressure
WHEN NOT IN
USE
rupture should
occur.
on
hoses and valves and to minimize
leakage
if
a
break
or
Check the condition of the fill
Before
hoses; they may need replacement after 5 years.
service, remove the washer lid to prevent children
discarding a washer, or removing it from
hiding inside.
Do not attempt to repair or replace any part of this appliance unless specifically recommended in this
Owner's Manual, or in published user-repair instructions that you understand and have the skills to
from
carry out.
Do not
tamper with controls.
5
Identification
of Parts
POWDER DETERGENT
BOX FOR DELAYED
HOT WATER SUPPLY
HOSE
WASHING
COLD WATER SUPPLY
HOSE
SOFTENER INLET
Make
Softner will automatically
flow into the tub.
sure
the water
does not leak.
POWER PLUG
If the
supply cord is
damaged, it must be
replaced by the
INLET HOLE FOR
BLEACH
manufacturer
or
its service agents
or
similarly qualified
person in order to
avoid a hazard.
TUB
LINT FILTER
Clean
START/PAUSE
Use to start
regularly
linting
BUTTON
on
to
stop
the clothes
load.
stop the
or
washing machine
temporarily.
DRAIN HOSE
WASHING WINGS
Check if the drain hose
Vertical movement of
is
hung up before
operating the
washing machine.
washing action can be
operated when a sufficient
amount of laundry is
deposited.
Set the proper water level,
an excessive amount of
water may increase
entanglement
of
laundry.
BASE
LEVELLING LEGS
Use to level the
washing
machine for correct balance
&
spin operation.
Accessories
Height adjustment
plate
Inlet hose
1 Each for cold and
2 Pieces
hot water
Drain hose
Introducin
6
I
Introducin
nstallation
Connect the drain hose
Connect the drain hose to the
Attach the
Place the hose
outlet of the drain pump located
at the rear of the washing
then
clip to the drain hose. And
push it toward the body of the
washing machine as
indicated by the arrow.
laundry
machine.
Do not
tub
or
use an
guide
over
the stand
the
pipe.
extension hose.
NOTE:
lay down the drain hose, as water will be discharged.
the drain hose is properly routed so it will not kink or lift from the sink.
To prevent syphoning, the drain hose should not extend more than 50 mm
from the end of the hose guide.
The discharge height should be approximately 0.9~1.2mfrom the floor.
Never
Be
"
sure
Washing machine is
reused
to be connected to the water mains
using new
hose-sets and that old hose-sets should not be
"
Flooding drainage
Your machine
requires
a
floor
drainage slope (or hole)
that will SAFELY DISPOSE of the FULL FLOW of any
water that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make
(or slope) that will prevent any possibility
of water
sure
damage
this machine is installed in
to floor
coverings
or
an area
with
a
drain hole
property.
Connect the inlet hose
Check that
sealing
washers
firmly
are
seated.
Attach the curved end of the hose to the inlet valve of the
machine; Tighten the coupling
Attach the
Tighten
on
washing
securely by hand. (Fig. 1)
straight end of the hose to the tap.
coupling nuts securely by hand. (Fig. 2)
the
Another hose
Turn
nuts
can
be attached to hot inlet valve and tap.
Tighten the coupling nuts
the taps and check for leaks.
firmly
if there is any leakage. If water pressure is strong, close the water tap
completely then open it slightly.
Do not install the washer where it is
directly exposed
to
sunlight, wind,
rain etc.
the power cord of this washer into a properly installed standard power point that is switched & earthed.
Your machine requires a floor drainage slope (or hole) that will SAFELY DISPOSE of the FULL
Plug
FLOW of any water that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in
that will prevent any possibility of water
Permissible water temperature : Max 70°C(160°F)
a
drain hole
(or slope)
damage to
Permissible water pressure : Max 80psi (550kpa, 8kg/cm2), Min 4psi
temperature & pressure is greater than above, it may cause
If water
floor
coverings
an area
or
with
property.
(30kpa, 0.3kg/cm2)
damage to the machine.
If you
have uncontrolled water temperature & pressure you should fit a temperature & pressure relief valve
to ensure that water temperature & water pressure remains within the safe limits. Consult a plumber
or
electrician if you
Do not
over
tighten
are
unable to
adjust water temperature
the
coupling
nuts with a tool. Inlets are
and pressure.
: Do not
plastic
strip
or
crossthread.
7
Installation
Install the washing machine
Introducin
flat and firm surface.
on a
Install the
washing machine on a level and firm surface.
washing machine more than 10cm from the wall to prevent vibration
The base opening must not be obstructed by carpeting when the washing
machine is installed on a carpeted floor.
Wooden floors may need reinforcing to prevent the normal vibration which
Keep
the
occurs
with
an
noise
during spinning.
unbalanced load.
10cm
CAUTION
If the washer is installed on a uneven,weak or tilted floor causing excessive vibration,
error can happen to it.
spin failure or
It must be placed on a firm and level floor to prevent spin failure.
If the appliance is supplied from a cord extension set or electrical portable outlet
device the core extension set or electrical portable outlet device should be
positioned so it is not subject to splashing or ingress of moisture.
"
Level the washing machine
Check the level of the
spirit
You
level
can
on
can
a
check the level also
washer with the
You
washing machine using
washing cabinet
the side of the
by visually lining up the
fills, adjacent walls or cabinets.
level the washer
using
Screw the A.L SPINDLE
the A.L
down
spindle fitted to the
legs up
required.
height adjustment plates are provided in the accessory bag.
if required to allow for greater adjustment of the legs.
When washing machine does not even out, turn A.L SPINDLE
right or left to be level.
Should the height adjustment exceed the maximum
allowed by the A.L SPINDLE, place height
adjustment plats provided under
the legs as shown in the
diagram.
or
cabinet.
as
Additional
These fit under A.L SPINDLE
UP
1
plate
used
2
plates
used 3
plates
used 4
plates
used
DOWN
A.L SPINDLE
8
F
unction Information
Our machine
provides
types of laundry.
Different types of laundry
Introducin
various
washing methods which
suits various conditions and
washing
NORMAL Wash
Use this
Program for everyday washing e.g. sheets, towels, T-shirts. (refer to page 16)
HEAVY Wash
Use this Program for heavily soiled durable garments e.g. overalls, jeans.
Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms
can
be washed.
(refer to page 16)
DELICATE Wash
Use this program to wash DELICATE and washable laundries.
(refer to page 16)
WOOL Wash
Delicate clothes
(lingerie, wool, etc.) which may be easily damaged can be washed. (refer to page 16)
The fibers of machine washable woolens have been specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
Before washing your woolens check the care label for the washing instructions.
When washing woolens use a mild Detergent recommended for washing wool.
Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
(The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.)
Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.)
You may wish to handwash these articles and place them in the machine to spin dry.
?
?
?
?
FAVORITE Wash
This
setting allows you to store your FAVORITE wash conditions in the normal cycle memory. (refer to page 19)
SILENT Wash
Use this program to wash
Washing according
quietly at night. (refer to page 20)
to the condition of
laundry
SPEEDY Wash
SPEEDY wash
can
be selected to wash
lightly soiled clothes of less than 2.0 kg in a short time. (refer to page 16)
SPEEDY SOAK Wash
SPEEDY SOAK Wash is designed to maximize washing performance and
soiled laundry with NORMAL or HEAVY Program. (refer to page 18)
Other
washing
can
be selected to wash
heavily
method
ECOSAVE Wash
ECOSAVE Wash is the economical program
to
minimize water
consumption. (refer to page 21)
DELAY START Wash
DELAY START Wash is used to delay the finishing time of the operation.
The number of hours to be delayed can be set by the user accordingly. (refer to page 22)
OPTION WASH
When the
user
needs
only SPIN, RINSE/SPIN, RINSE, WASH/RINSE, WASH, WASH/RINSE/SPIN,
(refer to page 23)
SPEEDY SOAK/WASH/RINSE/SPIN.
WASH OPTION
One
or more
WASH OPTIONS
can
be selected for NORMAL and
HEAVYwashing program. (refer to page 24)
9
Preparation
Before
Washing
BeforStaingWsh
Care Labels
*
Look for a
care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Sort clothes into loads that can be washed with the
same
wash
cycle, Water Temperature and spin speed.
Sorting
results, different fabrics need to be washed in different ways.
To get the best
?
?
?
(Heavy, Normal, Light)
Separate clothes according to the type and amount of soil.
Lights, Darks) Separate white fabrics from colored fabrics.
LINT (Lint producers, Collectors) Separate lint producers and lint collectors.
SOIL
COLOR (Whites,
Lint Producers
Terry cloth, Chenille, Towels, Nappies
Synthetics, Corduroy, Permanent Press, Socks
Lint Collectors
Check before
?
Check all
pockets to make sure that they are empty. Things such as nails, hairclips, matches,
and keys can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
pens,
?
?
?
?
?
?
coins,
Pretreat any dirt and stains.
Make sure the clothes are washable in water.
washing instructions.
Remove tissue in pockets.
on
stains
or
heavy soil
Pretreat shirt collars and cuffs with
Before
?
WIRE
Check the
Pretreatment
?
Loading
Use
a
a pre-wash product or liquid Detergent when placing them in the washer.
washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.
pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The
longer they are left the harder they are to remove.
(For more detail refer to page13)
Loading
Do not wash fabrics
WARNING
containing flammable materials (waxes, cleaning fluids, etc.).
Fire Hazard
Load Size
The WATER LEVEL should just
cover
the clothes.
Adjust the load size
Never place items in the washer that are
dampened with gasoline or other flammable
accordingly. Loosely load clothes no higher than the top row of holes in the
fluids.
washer tub. To add items after washer has
No washer can completely remove oil.
Do not dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
started, press Start button and
submerge additional items. Close the lid and press Start button again to restart.
Light
and
Large-sized clothing
Clothes like downs and woollens
light weight, large and float easily. Use a nylon net and
laundry floats during the wash cycle, it may
become damaged. Use dissolved Detergent to prevent the Detergent from clumping.
wash them in
a
are
small amount of water. If the
Long laundry items
nylon nets for long, DELICATE items. For laundry with long strings or long length a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Use
,
10
U
BeforStaingWsh
Using
of Water,
se
Bleach and Softener
Detergent,
Water
Amount of WATER LEVEL
?
?
This machine detects the
quantity
(to
be
used) will be
shown
The
?
When the WATER LEVEL is
Water
the control
Temperature
The machine sets the
?
You
appropriate temperature automatically according to the wash program
change
Temperature by pressing the WATER TEMP. button. (refer to page 14)
The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning results.
can
.
the Water
We recommend temperatures of:
HOT 49~60°C...(120-140˚F)
-
-
-
WARM 29~40°C...(85-105˚F)
COLD* 18~24°C...(65-75˚F)
White items,
Most items
diapers, underclothing and heavily soiled,
colorfast items.
Only very bright colors with light soil.
washing in COLD water additional steps may be needed:
Adjust Detergent amount and pre-dissolve Detergent in WARM water
When
-
-
-
-
*
WATER
even
?
?
sets the
automatically detected, it may differ depending on the
quantity
though the same WATER LEVEL is indicated on the control panel.
The amount of a cup in the diagram is about 40g for concentrated Detergent.
of laundry
?
automatically, then
panel.
following table shows the amount of water.
on
?
?
of laundry
LEVEL and proper amount of Detergent.
When you select a wash program, the WATER LEVEL and amount of Detergent
Pretreat spots and stains
Soak heavily soiled items
appropriate bleach
Use
Temperature below 18°C...(65˚F) will not activate laundry additives and may cause lint, residue, poor cleaning,
In addition, Detergent manufactures and care labels define COLD water as 26~29°C...(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the Detergent will not activate and clean
effectively.
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be
necessary for
severe cases.
Using Detergent
Detergent
Follow the
Use
more
Detergent package directions. Using too little Detergent is a common cause of laundry problems.
Detergent if you have hard water, large loads, greasy or oily soils or lower Water Temperature.
Choosing the right Detergent
We recommend the
use
of domestic
Detergent, (powder, liquid or concentrated). Soap flakes or
washing woolens
granulated soap powders should not be used in your washing machine. When
remember to use Detergent suitable for washing woolens.
etc.
11
Using Detergent
How much
Detergent
When you select a wash program the WATER LEVEL and the amount of Detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated Detergent.
The correct amount of Detergent will vary depending on the amount of soil in your clothes
cloches may need more Detergent, while bath towels usually need less.).
For
liquid and concentrated Detergents,
follow the recommendations of the
(Jeans
and work
Detergent manufacturer.
Note: To check you are using the correct amount of Detergent, lift the lid of your machine about halfway through the wash. There should be a thin layer of foam over the surface of the water. Lots of
foam may look good, but it does not contribute to cleaning your clothes. No foam means not enough
Detergent has been used; soil and lint can settle back on the clothes or the washing machine.
If excess
Detergent is used, the rinse will not be as clean and efficient. Also, it could cause
pollution, so use it accordingly.
environmental
Adding the Detergent
Open the Detergent dispenser and deposit the appropriate
Powder Detergent Box
amount of Detergent
()
where you deposit the Detergent
Powder Detergent dispenser.
Where you
Some Detergents MUST be fully dissolved before
deposit the
Detergent
adding to your machine to get the best wash results.
Check the instructions on the Detergent packet.
If you use powdered Detergent it is essential that the required amount be fully dissolved in very HOT water
before being added to WARM or HOT water for the actual wash.
Pre-dissolving Detergent in WARM water when washing in COLD water can improve its performance.
Using Liquid
?
?
?
?
Bleach
Bleach
clothing care label for special instructions and separate the
laundry to be bleached
Dilute liquid chlorine bleach.
Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
Check
dispenser
()
Attention
Never pour undiluted liquid bleach directly onto clothes
This may cause change of color or damage the laundry.
or
into the wash basket.
Do not mix chlorine bleach with ammonia
as
vinegar and/or rust remover. Mixing can reduce
toxic gas which may cause death.
Do not pour powdered bleach into bleach
or
acids such
a
dispenser.
BeforStaingWsh
12
U
BeforStaingWsh
Using
?
?
se
of Water,
Detergent,
Bleach and Softener
Fabric Softener
Dilute fabric softener with water.
Undiluted fabric softener may result in spots that look like oil
stains.
Softener
dispenser (
)
Measure and add the recommended amount of fabric softener
into the compartment marked with this
Follow manufacturer's direction.
symbol(
).
or
Fabric softener is automatically
with indication beep.
dispensed
in the final rinse
If you want EXTRA RINSE, you must add fabric
softener manually when indication beep rings in the final
rinse. This maximize the fabric softener function.
?
Do not overfill. The dispenser hold
Never add more than 35mL.
max
35mL.
of the fabric softener
which could result in stained clothes. A cup with a pouring spout will
Overfilling can cause early dispensing
?
help
you avoid
spilling.
The effect of adding fabric softener may vary according to its viscosity. The stickier fabric softener makes its
effect the lower. For a sticky fabric softener it is recommended that it be diluted with water, then be manually
put during the time when the washer beeps several times before the final rinse. This function informing
correct time to dispense manually is optionally applied to some models. Please keep it in mind that fabric
softener has to be diluted with water before dispensed and never poured directly on clothes.
Attention
Do not mix with
Detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Option washing is not designed to be used with fabric
softener
dispenser.
13
Guide for Stain Removal
Special
WARNING
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of children's reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
?
?
?
?
?
?
For successful stain removal:
?
Remove stains
?
Determine the kind of
promptly.
stain,
then follow the recommended treatment in the stain
removal chart below.
To pretreat
stains, use a prewash product, liquid Detergent,
granular Detergent and water.
?
unknown stains because HOT water
?
Use COLD water
?
Check
?
Check for colorfastness
?
Rinse and wash items after stain removal.
care
on
label instructions for treatments to avoid
by testing
stain
on
remover on an
or a
paste made from
set
can
stains.
specific fabrics.
inside
Follow fabric
care
label
instructions
seam.
Stain Removal
TREATMENT
STAIN
Adhesive tape,
rubber cement
chewing gum,
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
Candle wax, crayon
Apply ice. Scrape off excess. Place stain face down
nonflammable dry cleaning fluid.
Use
Rinse with COLD water. Rub with bar soap. Or pretreat
bleach safe for fabric.
soak in WARM water using product
Pretreat with prewash stain remover
Ink
Mildew, scorch
Mud
Mustard, tomato
Nail polish
Paint, varnish
Rust, brown or yellow
discoloration
Shoe polish
or
soak with product
containing enzymes. Wash using
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
or
product containing enzymes to pretreat or soak stains.
Collar or cuff soil, cosmetics
Grass
paper towels. Saturate with prewash stain remover
Pretreat stain. Wash using COLD water and bleach safe for fabric.
Chocolate
Dye transfer on white fabric
on
or
or
containing enzymes. Wash using bleach safe for fabric.
rub with bar soap.
packaged color remover. Wash using bleach safe for fabric.
or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
residue
from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
Scrape
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before washing. Badly
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular Detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash using bleach
Use
Pretreat
safe for fabric.
BeforStaingWsh
14
F
BeforStaingWsh
unction of each Button
WATER TEMPERATURE BUTTON
Use to select Water
WATER LEVEL BUTTON
(INDICATION OF DETERGENT AMOUNT)
Temperature.
Pressing the button allows you to
select
?
WARM (HOT&COLD)
HOT
COLD
WARM respectively.
Default
Use to adjust the WATER LEVEL as required. The appropriate amount of
Detergent is shown next to the WATER LEVEL in the WATERDETERGENT diagram
setting is WARM.
?
WATER LEVEL is automatically selected for NORMAL program.
The following
LARGE
settings are indicated as the button is pushed
LARGE EX-LARGE
.
SMALL MEDIUM
WASH OPTION BUTTON
?
According to kinds of
laundry, soiled extent or
washing habit you can
?
The time increases when the button
?
The
a
is
OPTION manually.
pushed.
following settings are indicated
as the button is pushed 3
4
5
By pressing the button
...11
select suitable WASH
?
delayed finishing time.
Use to set
WASH OPTION is
changed.
(refer to page 24)
12
14
16
...46
48
3 HOUR.
?
To cancel
delay time, turn the power
switch off.
(refer to page 22)
EX-LARGE
SMALL
MEDIUM LARGE
LARGE
WASHING CONDITION INDICATOR
DELAY START (RESERVATION) BUTTON
?
MEDIUM
?
?
It only operates in NORMAL Program.
During being detected by the sensor, the LED flashes green, orange
and red in turn. And, after detecting, the LED lights a specific color
according to the detecting condition as follows:
If the current washing condition (Detergent quantity, Water
Temperature, water quality, etc.) is determined as better than the
standard one, it optimizes the algorithm to save the energy by
decreasing washing time/strength, and the LED automatically turns
to red.
If the current washing condition is determined as worse than the
standard one, it optimizes the algorithm by increasing washing
time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard
one, the algorithm has no change and the LED turns to green.
Note
*
*
*
optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
For
15
TIME
LEFT,
DELAY START
START/ PAUSE BUTTON
(RESERVATION), ALARM INDICATION
?
Time left
?
-
During operation,
the
remaining time is indicated.
DELAY START INDICATION
(RESERVATION) When
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
?
-
?
DELAY START
Alarm indication -When
?
appears to indicate the
that the lid is open.
an error
occurs,
an error
abnormality. For example,
Use to start
or
pause the
washing process.
Repeats start and pause by
pushing the button.
message
indicates
AUTO OFF
(POWER) BUTTON
?
?
?
Use to turn the power
off.
Push
again
on or
off
on or
and power goes
The power goes off
automatically about 10
seconds after the wash is
finished.
CHILD LOCK FUNCTION
PROCESS BUTTON
?
ge
Use to select
?
SPEEDY SOAK,
Wash, Rinse and Spin
or
functions
as
desired.
Use to lock
or
unlock the control
buttons to prevent
from
settings
being changed by a child.
To lock, push the PROCESS
and to unlock
simultaneously
push them one more time during
the washing process.
urns
e
(refer to page 24)
?
?
Use for
selecting wash program.
This button allows you to select 4
different programs for different kinds of
laundry
and
PROGRAM buttons
e
PROGRAM BUTTON
?
and dirtiness.
program selections
light up in
follows: NORMAL
sequence
SPEEDY
HEAVY
SILENT
FAVORITE
WOOL
ECOSAVE
NORMAL etc.
Select the desired program
by pressing the
button.
andard
*
designed to detect based on a synthetic Detergent powder. If you put a
bleaching agent, the detecting ability of the sensor may be decreased.
Even if the water level or the water temperature are changed by the user in NORMAL Program,
the sensor will still work. The sensor algorithm may differ according to models.
The control panel may differ according to different models.
The
sensor
liquid
*
*
for
one or a
a
Detergent quantity
natural
one or
is
too much
as
DELICATE
BeforStaingWsh
16
Washing Programs
WashingProm
Add
the
Washing
Programs
1
2
LEVEL next to
manufacturer's instructions
3
laundry
highly
Select the
a
program
short
the
Control
under
2.0kg.
Add the appropriate
quantity of Detergent as
indicated by the WATER
LEVEL next to
WATER DETERGENT.
Or follow the Detergent
on
recommended
amount is
5
2
SPEEDY
washing
soiled clothes for
4
WATER DETERGENT.
Or follow the Detergent
SPEEDY Wash
lightly
Detergent
Add the appropriate
quantity of Detergent as
indicated by the WATER
1
time. The
the
laundry
NORMAL Wash
Used for normal loads, this
mode automatically selects the
most appropriate conditions
and completes the sequence
in one operation. The built-in
sensor detects the size of the
load and the ideal wash
power and wash, rinse and
spin times are set accordingly.
Use this mode when
Add
panel.
manufacturer's
instructions
1
5
2
3
HEAVY Wash
Use HEAVY program when
washing Jeans of different sizes
Spread
heavy
evenly in
Select the
the
HEAVY
the tub
the Control
program
on
panel.
1
3
5
2
WOOL Wash
Use this program for
Select the
Use neutral
fabrics such
WOOL
Detergent
appropriate for the
(wash only
as
washing delicate
lingerie and woolens.
"water washable"
program
clothes)
Before
washing your woolens check
the care label for the washing
on
the Control
laundry.
panel.
When washing
woolens use a
mild Detergent
recommend- ed
for washing wool.
instructions.
(wash only water washable clothes)
DELICATE
Use this program to wash items
requiring a GENTLE WASH
3
5
2
・Select the
action.
This would include
nylons and dress
light soiled.
1
blouses,
shirts with
DELICATE
program
on
the Control
panel.
17
Close the lid
3
5
Finish
Caution & Note
6
If water is
the
wet
tub before starting
already in
laundry into the
tub,
or
putting
will increase the WATER LEVEL.
The pulsator rotates for
8 seconds to detect the
laundry load.
Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.
Water will be
for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.
supplied
When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
With
automatically.
(refer to page 14)
lightweight bulky loads,
LEVEL
can
WATER
be set low.
Changes
to Water Temperature
(HOT/COLD) and wash level are
possible during operation.
7
4
6
4
6
7
4
6
7
When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
Washing with HOT water may damage
the laundry
Ensure that the load is under 2kg.
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing
.
may still contain
This is normal.
some
water.
If WOOL wash is selected, GENTLE SPIN
will be set automatically.
4
6
7
・Before starting to wash, make
the laundry is washable.
Washing with
the laundry.
sure
HOT water may
that
damage
WashingProm
18
S
WashingProm
PEEDY SOAK Wash
Use this mode to wash normal clothes or thick and
SPEEDY SOAK mode can be used with NORMAL
1
Press the AUTO OFF
2
Press the PROGRAM button to select the
(POWER) button
clothes which
HEAVY program.
heavy
or
washing
DELICATE
program.
not work
in WOOL and
SPEEDY,
Program.
Keep pressing the PROCESS button until the SPEEDY SOAK
light is on and then Wash, Rinse, Spin lights are on
simultaneously.
Until the washing
light is on.
4
excessively dirty.
to turn power on.
SPEEDY SOAK will
3
are
process is
Add the Detergent.
completed,
The
the SPEEDY SOAK
appropriate quantity of Detergent marked next to
the
WATER LEVEL of WATER-DETERGENT.
5
Add the
laundry
and press the START/PAUSE button.
The WATER LEVEL and the amount of
used will be shown and water will be
6
Close the lid.
Water will be
wash to
Finish
Detergent to be
supplied.
supplied for 2 minutes after the start of the
supplement the absorbed water by the laundry.
When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
19
FAVORITE
Wash
Pressing the FAVORITE button allows you to store your FAVORITE
normal cycle memory and then recall it for use at a later time.
1
Press the AUTO OFF
2
Select the FAVORITE program.
3
Select your FAVORITE wash conditions.
(POWER) button
wash conditions in the
WashingProm
to turn power on.
?
Press the WATER LEVEL button to select
?
Press the WASH OPTION to select WASH OPTION.
?
Press the PROCESS button to select
WATER LEVEL.
RINSE, SPIN) respectively
4
PROCESS(WASH,
you want to store.
Press the START/PAUSE button to store & start your FAVORITE wash
Power turns off automatically after wash.
Note
To recall your FAVORITE
1. Press POWER
cycle.
on.
2. Select the FAVORITE
cycle by pressing
the PROGRAM.
3. Press the START/PAUSE button. Then the wash
cycle
starts.
cycle.
20
S
WashingProm
ILENT Wash
Use this program to wash
quietly
in SILENT
especially during
1
Press the AUTO OFF
2
Press the PROGRAM button to select SILENT program.
3
Add the
4
Press the START/PAUSE button.
5
Add the Detergent and close the lid.
laundry
(POWER) button
into the
to turn power on.
washing tub.
Note
?
?
late
SILENT program takes
longer washing
To reduce noise in
spinning, spin rpm
So the
more
laundry has
time than NORMAL program.
is lower than normal
moisture than normal.
spinning
rpm.
night
and dawn.
21
ECOSAVE
Wash
ECOSAVE is the economical program to minimize water
consumption.
WashingProm
1
Press the POWER button to turn power
2
Press the PROGRAM button to select the ECOSAVE program.
3
Press the START/PAUSE button.
?
4
Left time is
on.
displayed.
Close the lid.
?
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid.
an
Note
?
?
Compared with other programs, it could seem rinseability is reduced so you
key (Extra Rinse) based on clothes weight and detergent amount if needed.
ECOSAVE
can
handle all types of clothes that the normal
course can
do.
can use
wash
option
22
D
AditonalFucPrgm
ELAY START
(RESERVATION) Wash
DELAY START (RESERVATION) Wash is used to
operation. The hours
The time
on
the
to
display
be
be set
by the
is
time
not
delayed can
the finishing
1
Press the POWER button to turn power
2
Press the PROGRAM button to select the
,
delay the finishing
user accordingly.
time of the
the start time.
on.
washing
program.
Select the program for laundry on the Control panel.
This program will not work in WOOL and DELICATE
Program.
3
Press the DELAY START
delayed washing
is to
How to set the
to set
the time when the
delay time.
you'd like your wash to finish at 9
in the figure below.
When you push the button the reservation time changes
3E 4E5E...12E 14E 16E...E 48E 3 repeatedly.
Example
:
It's 7
(RESERVATION) button
be completed.
a.m. now.
p.m. set the
4
If
time
as
The
Add the Detergent.
(RES.=DELAY)
appropriate quantity of Detergent marked next to
the
WATER LEVEL of WATER?DETERGENT.
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid
5
Add the
laundry
and press the START/PAUSE button.
When you press the START/PAUSE button the
blink.
6
Close the lid.
Water will be
Finish
The
wash to
light will
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
washing will be finished according to the delayed time.
Note
If the lid is open, the machine will not work, and
START
an
alarm
signal will
alarm to remind you to close the lid.
washing program, spinning time, WATER LEVEL or HOT/COLD manually, press the DELAY
button and select the desired option. Then press the START/PAUSE button.
To select
(RESERVATION)
laundry cannot be taken out immediately after the wash program ends, it is better to
spinning program (The laundry will be wrinkled if left for a long time after spinning.)
When the
.
an
omit the
23
Option
Washing
When you
need the Wash, Wash/Rinse
only
or
Rinse
cycles,
these
can
be set
manually
1
Press the AUTO OFF
2
Wash
(POWER) button
Wash+Rinse
,
,
Rinse
,
to turn power on.
Rinse+Spin
,
Press the PROCESS button until above
light is on. (refer to p15)
When you want to
washing tub drains
Spin only options
Option Washing
only drain, wait until the water in
completely and then, turn off the
the
power.
3
Press the WATER LEVEL
to
WATER LEVEL
to control the WATER LEVEL according
do not choose anything, it is set the Large
button,
laundry. If you
automatically.
the amount of
(refer to page 14)
4
Add the
5
Press the START/PAUSE button.
6
Add the Detergent and close the lid.
laundry
into the
washing tub.
Note
?
When
a
wash is
?
?
Wash, Wash/Rinse
completed.
If you do not
If
specify
or
Rinse only
option
the WATER LEVEL, then
only Rinse is selected,
is selected, the water will not be drained off after the
Large
will be
the process will start from Water
automatically
Supply.
selected.
AditonalFucPrgm
24
O
AditonalFucPrgm
ther Useful Functions
Child Lock Function
If you want to lock all the
child lock
keys to prevent settings from being changed by a child,
you
can use
the
option.
How to Lock
1
Press the POWER button.
Turn Power
2
Press the START/PAUSE button to start
washing.
After all
3
on.
washing conditions
are
set
Press both the PROCESS button and the PROGRAM button
according to the manual.
simultaneously.
During the wash program, all the buttons are locked
washing is completed or until the child- lock
function is deactivated manually.
and the remaining time will be displayed
alternately in child-lock mode.
until
"
"
How to Unlock
If you want to unlock
during wash, press both the PROCESS
and the PROGRAM button
simultaneously
again.
WASH OPTION
One
(OPTION)
or more
WASH OPTIONS
Wash program is
changed
can
be selected for FUZZY and
follows
according to
?
EXTRA WASH
:
Gives additional 3 min wash
?
EXTRA RINSE
:
Gives additional
eg.)
?
Mute
as
one
HEAVYwashing program.
selected WASH OPTIONS.
deep rinse
If you want EXTRA
RINSE, you
indication
in the final rinse. This maximize the fabric softener function.
beep rings
must add fabric softener
GENTLE SPIN : Gives GENTLE SPIN instead of normal
manually when
spin.
Option
If you want to
use
the
washing machine without alarm signal sounds, press both the
WATER LEVEL and
PROCESS buttons simultaneously.
To make buzzer
time.
work, press both the WATER LEVEL and PROCESS buttons simultaneously
one more
25
Maintenance
CLEAN THE FILTER IN THE VALVE
1
Disconnect the power cord.
2
3
Pull out the filter from the
inlet valve.
Use
tooth brush to get rid of
Replace it.
a
dirt.
CLEAN THE LINT FILTER
1
Pull out the waste thread
collection net from the tub
in the direction of the
2
Turn inside out to get
rid of filth.
3
Insert it into the
original
location.
arrow
below.
CLEAN THE CABINET
Wipe
with
stains from the cabinet and the control
a
panel
soft cloth.
CAUTION
Do not pour water directly on the cabinet.
Do not wipe the cabinet with benzine, thinner,
cleanser, alkaline detergent or wax.
Do not rub the cabinet with
When you
use a
instructions.
a
scrubbing
brush.
chemical dustcloth, follow the
Mainte c
26
M
Mainte c
aintenance
CLEAN THE PUMP CASING
Place
1
a
towel
on
the
Turn the cap
2
floor under the drain
(when drainage is bad)
clockwise and
pump cap. Excess
water may flow out.
pull
pump
filter.
it out.
:
Check it
over
casing
4
and from the
Guide rib
Filter
if water leaks after
reassembling.(Rubber ring
WHEN THERE IS A FEAR OF FREEZING
1
Close the water taps and
2
Hold the water
remove
supply hoses
as
the water
supply hoses.
shown in the
drawing
so
that it does not sag.
3
Set the POWER button to "ON" and the WATER TEMP. to
4
Press START/PAUSE button and
operate the
washing
Water which remains in the water
supply is
5
Press START/PAUSE button to
6
Lower the drain hose and select manual
7
Press START/PAUSE button and
removed.
stop the operation.
spin
mode.
operate for 30 seconds.
Set the POWER button to "OFF".
?
Drain the water in the bowl and the drain hose.
IF FROZEN
1
Remove the water
supply hose,
and immerse it in
hot water at approx. 40°C.
2
Pour approx. 2 liters of hot water at approx. 40°C,
into the bowl for 10 minutes.
3
Connect the water
confirm that the
and
drainage
supply hose to the water tap, and
washing machine performs the supply
of water.
warm.
machine for 20
seconds.
?
Replace the cap. Insert the filter along
the guide ribs inside the pump casing.
Filter must face the guide ribs inside
pump casing and securely turn the cap
clockwise.
Cap
CAUTION
Remove any foreign
objects and fluff inside
3
counter-
is in the
cap)
27
Troubleshooting
?
If
an
abnormal
?
Request
?
This
symbol
appears in the
for the service center
appliance
is fitted with
machine when it is
exposed
Symptom
Water
Supply
Failure
or
a
to
display window,
agent
in the
case
check the
of failure
or
following
damage
Message
asking
except for the
safety function that automatically stops
heavy disturbance on the mains.
Error
before
for service.
following.
the operation of the
washing
Check up
.
.
.
.
Is the water tap shut off?
Is the water supply cut off ?
Is the tap
or
water
supply hose frozen ?
Is the water pressure low or is the filter of the inlet
clogged with impurities?
valve
.
.
Drainage Failure
Spin Failure
Door(Lid) Open
Internal sensing
failure
Power failure
Overflow failure
Is the Hot hose connected to cold?
Is the Cold hose connected to hot?
.
Is the drain hose
.
Is the drain hose bent
.
Is the internal part of the hose or drain pump
(only pump model) clogged with impurities?
.
Check if power has gone off.
positioned correctly?
or placed too high?
.
Is the
laundry evenly balanced?
.
Is the
washing machine placed on
.
Is the lid closed?
.
a
flat surface?
Please call your nearest LG Electronics service center
for help.
Troubleshting
28
S
pecification
Specifaton
Inlet water pressure
550
max
min 30
H
kpa (80 psi)
kpa (4 psi)
M90-12m Standpie inmuhegtofaps clrhetofmain
150m
Alowingfor adjustblef t
Electricity supply
240V
50 Hz sinusoidal
D
W
Model
WF-T655A
Type
Fully
6.5
Washing capacity
Electrical
See the
ratings
7.5
rating plate
attached to the
Approx.
(EX-LARGE water level)
Washing system
Automatic
Water tap pressure
Outer dimension
(W
automatic washer
kg
Standard amount of water
Weight
WF-T755A
rear
kg
of the washer
82
reverse
pulsator type
30-550kpa(0.3-8kgf/cm2)
D
H)
590 x
606 x 928
590 x 606 x 958
mm
41
kg
mm
Memo
Download PDF

advertising