LG | WF-T753A | LG WF-T753A Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T502A, T552A
WF-T653A, T753A
Please read this manual
washing
carefully
before
operating your
machine and retain it for future reference.
CONTENTS
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of
the life of your washer. You will find many answers to
common problems in the Troubleshooting section. If you review our chart of
Troubleshooting Tips first, you may not need to call for service at all.
time and money
FEATURES
over
.........................................................................................
SAFETY INFORMATION
....................................................................
3
4
MACHINE PARTS............................................................................... 5
INSTALLATION
...................................................................................
6
AUTOMATIC AND MANUAL PROGRAMMING...................................8
NORMAL WASH PROGRAM.............................................................10
SPEEDY / HEAVY WASH PROGRAM
.............................................
WOOL / SPEEDY SOAK WASH PROGRAM
DELAY START WASHING PROGRAM
SELECTABLE WASHING METHODS
WASHING PROCEDURE
...................................
............................................
..............................................
.................................................................
LOAD SIZE AND DETERGENT
........................................................
HOW TO USE THE BLEACH AND THE SOFTENER
CHILD LOCK / WASH OPTION
MAINTENANCE
......................
........................................................
................................................................................
12
14
16
18
20
21
22
23
24
TROUBLE-SHOOTING GUIDE......................................................... 26
SPECIFICATIONS
2
............................................................................
27
FEATURES
CAUTION
"Turbo Drum" washer doesn't operate while the lid is open. If the lid is
during the wash, rinse and spin cycles, the operation stops for safety.
Fuzzy logic
A load
set
sensor
&
a
opened
control
micro processor in the controller detect laundry load and
conditions such as water level, wash time etc.
optimum washing
The most advanced
technology
in
START
electronic control system provides
the best washing performance.
Turbo drum
SENSING
SETTING
Laundry Sensor
Optimum
Washing
Water Level Sensor
Condition
WASHING
AUTO
POWER
OFF
washing
The
in
in
"punch + 3" washing wings and the washing tub turn
opposite directions. This makes the water current flow
two directions which improves washing efficiency.
The wash
which
small
performance is also improved by the water
continually cascades into the wash bowl from
waterfalls in the washing tub.
Innovated washing wings
Three small
washing wings generate strong and
sharp washing currents to clean laundry uniformly.
Adjusted vertical movement and rotating direction
of the washing punch reduces laundry entanglement and improves washing power.
3 Step washing
3 step
washing produces
tangling.
the best
washing performance
with low
Rubbing
Shaking
Rubbing
and
and
Shaking
Disentangling
Device for removing lint
Lint filter catches lint and thread
washing
to make the
laundry
generated during
clean.
3
SAFETY INFORMATION
WARNING!
Read and follow this
safety information carefully.
safety, the information in this manual must be followed to minimize the risk of fire
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
For your
or
Save these instructions.
WATER HEATER
SAFETY
Under certain conditions
hydrogen gas may be produced in a water heater that has not
Hydrogen gas can explosive under these circumstances.
If the hot water has not been used for two weeks or mare, prevent the possibility of damage
or injury by turning on all hot water faucets and allowing them to run for several minutes.
Do this before using any electrical appliance which is connected to the hot water system.
This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is
flammable, do not smoke or use an open flame or appliance during this process.
been used for two weeks
PROPER
Install
INSTALLATION
the weather.
or more.
store where it will not be
or
Properly ground
exposed
washer to conform with all
to
temperatures below freezing
governing
or
exposed
to
codes and ordinances. Follow details
in Installation Instructions.
YOUR
LAUNDRY
AREA
Keep
as
the
area
underneath and around your
lint, paper, rags, chemicals,
Close
appliances
free of combustible materials such
etc.
supervision is necessary if this appliance is used by or
play on, with, or inside this or any other appliance.
near
children. Do not allow
children to
Keep
washer away from fire.
WHEN USING
Use this
THE WASHER
Never reach into washer while it is
before
appliance only
opening
for its intended purpose as described in this Owner's Manual.
moving. Wait until the machine has completely stopped
the lid.
Do not mix chlorine bleach with ammonia
Mixing
different chemicals
Do not wash
or
acids such
as
vinegar
and/or rust
remover.
toxic gas which may cause death.
articles that have been cleaned in, washed in, soaked
can
produce
a
in, or spotted
explosive substances (such as wax, oil, paint, gasoline, dry-cleaning
solvents, kerosene, etc.) which may ignite or expolde. Do not add these substances to the
wash water. Do not use or place these substances around your washer or dryer during
operation.
The laundry process can reduce the flame retardancy of fabrics. To avoid such a result,
carefully follow the garment manufacturer's wash and care instructions.
To minimize the possibility of electric shock, unplug this appliance from the power supply or
disconnect the washer at the household distribution panel by removing the fuse or swiching
off the circuit breaker before attempting any maintenance or cleaning.
NOTE: Pressing Power button to turn off does NOT disconnect the appliance from the
power supply.
Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
or
with combustible
WHEN NOT IN
USE
dry
or
Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if
a break or rupture should occur. Check the condition of the fill hoses; they may need
replacement after 5 years.
Before discarding a washer, or removing it from service, remove the washer lid to prevent
children from hiding inside.
Do not attempt to repair or replace any part of this appliance unless specifically recommended in this Owner's Manual, or in published user-repair instructions that you understand and have the skills to carry out.
Do not tamper with controls.
4
MACHINE PARTS
Powder
HOT WATER SUPPLY
HOSE
detergent
delayed
washing
box for
COLD WATER SUPPLY
HOSE
SOFTENER INLET
Make sure the water
does not leak.
Softener will automatically
flow into the tub.
LINT FILTER
INLET HOLE FOR
Clean regularly it to remove
Cumulated lints from the
clothes.
BLEACH
FUNCTION SELECTOR
START/PAUSE
BUTTON
Use to start or stop the
washing
porarily.
DRAIN HOSE
Check if the drain hose
is located in the laundry
tub before operating the
washing machine.
machine tem-
WASHING WINGS
Vertical movement of
washing punch can be
operated when a sufficient
amount of laundry is deposited.
POWER PLUG
If the supply cord is
damaged, it must be
replaced by the manufacturer
Set the proper water level,
an excessive amount of
water may increase
entanglement of laundry.
or
its service
agents
or
similarly qualified
person
in order to avoid a hazard.
LEVELLING LEGS
Use to level the
washing
BASE
machine for correct balance
&
spin operation.
Accessories
Height adjustment
plate
Inlet hose
Drain hose
Silent
cover
(WF-T502A, T552A)
UP
1 Each for cold and
2 Pieces
hot water
5
INSTALLATION
Connect the drain hose
Connect the drain hose to
Attach the
the outlet of the drain pump
located at the rear of the
And then
clip to the drain hose.
push it toward the body
of the washing machine as
indicated by the arrow.
machine.
washing
Place the hose
laundry
Do not
tub
guide
over
the stand
or
the
pipe.
extension hose.
use an
Within 50mm
NOTE:
Never
Hose Guide
down the drain
lay
the drain hose is
hose,
as
water will be
Be
sure
To
prevent syphoning, the drain hose should
from the end of the hose
The
"
routed
so
discharged.
it will not kink
or
0.9~1.2m
not extend more than 50 mm
approximately
0.9~1.2mfrom the floor.
machine is to be connected to the water mains
should not be reused
Drain Hose
lift from the sink.
guide.
should be
discharge height
Washing
properly
using
new
hose-sets and that old hose-sets
"
Flooding drainage
Your machine
requires
a
floor
drainage slope (or hole)
that will SAFELY DISPOSE of the FULL FLOW of
any water that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in an area with a
drain hole
that will
(or slope)
prevent any possibility of
water
damage
to floor
coverings
or
property.
Connect the inlet hose
Check that
sealing
washers
are
firmly
seated.
Attach the curved end of the hose to the inlet valve of the
machine; Tighten the coupling
nuts
securely by
hand.
washing
(Fig. 1)
MACHINE
END
TAP
SEALING
WASHER
Attach the
straight end of the hose to the tap.
Tighten the coupling nuts securely by hand. (Fig. 2)
Another hose
Turn
can
be attached to hot inlet valve and
TWIST
TAP
tap.
the
CAUTION
INLET
WASHER
taps and check for leaks. Tighten the coupling nuts
if
there
is any leakage. If water pressure is strong, close the
firmly
water tap completely then open it slightly.
on
END
SEALING
VALVE
INLET
HOSE
(Fig. 1)
(Fig. 2)
Do not install the washer where it is
directly exposed to sunlight, wind, rain etc.
Plug the power cord of this washer into a properly installed standard power point that is switched & earthed.
Your machine requires a floor drainage slope (or hole) that will SAFELY DISPOSE of the FULL
FLOW of any water that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in
an area
with
(or slope) that will prevent any possibility of water damage to floor coverings or property.
Permissible water temperature : Max 70°C(160°F)
Permissible water pressure : Max 116psi (800kpa, 8kg/cm2), Min 4psi (30kpa, 0.3kg/cm2)
If water temperature & pressure is greater than above, it may cause damage to the machine. If you
a
drain hole
have uncontrolled water
to
or
temperature & pressure you should fit a temperature & pressure relief valve
temperature & water pressure remains within the safe limits. Consult a plumber
electrician if you are unable to adjust water temperature and pressure.
ensure
Do not
6
that water
over
tighten
the
coupling
nuts with
a
tool. Inlets
are
plastic
:
Do not
strip
or
crossthread.
SETTING SCREW
Install the silent
Insert the silent
back of
washing
cover
to be
firmly
machine and
Install the
fixed from the
screw
it
SILENT COVER
(1pcs)
UP
Do not install the washer where it is
CAUTION
directly exposed to sunlight, wind, rain etc.
a properly installed standard power point
the power cord of this washer into
that is switched & earthed.
Plug
washing machine
on a
Install the washing machine on a level and firm surface.
the washing machine more than 10cm from the wall to
Keep
The base
opening
SILENT BASE
cover (WF-T502A, T552A)
must not be obstructed
machine is installed
by carpeting
carpeted floor.
need reinforcing to prevent
flat and firm surface.
prevent vibration noise during spinning.
when the
washing
on a
Wooden floors may
with an unbalanced load.
the normal vibration which
occurs
10cm
CAUTION
Level the
If the
appliance
device the
core
positioned
so
is
supplied
from
extension set
it is not
subject
or
to
or electrical portable outlet
portable outlet device should be
splashing or ingress of moisture.
a
cord extension set
electrical
washing machine
Check the level of the
washing machine using a
spirit
washing cabinet
You can check the level also by visually lining up the
washer with the fills, adjacent walls or cabinets.
level
You
can
on
the side of the
level the washer
using
the A.L
spindle fitted
to the cabinet.
Screw the A.L SPINDLE
legs up or down as required.
height adjustment plates are provided in the accessory bag.
if required to allow for greater adjustment of the legs.
When washing machine does not even out, turn A.L SPINDLE
right or left to be level.
Should the height adjustment exceed the maximum
allowed by the A.L SPINDLE, place height
adjustment plats provided under
the legs as shown in the
diagram.
Additional
1
plate used
2
plates used
3
plates
used 4
plates used
These fit under A.L SPINDLE
UP
DOWN
A.L SPINDLE
7
AUTOMATIC AND MANUAL PROGRAMMING
Fully automatic control
The
Fuzzy program is used for average
Press POWER ON button.
Close the lid and press START/PAUSE button.
lights will scroll up and down while the
day to day washing.
The water level
Load clothes.
Add
washer is
detergent,
bleach and conditioner
as
working
out the
optimum
water level for your
clothes load.
desired.
Preparation before wash
Sort your
washing
Each load of
washing
washing
into
separate wash loads
should contain
conditions. For
clothing
clothes with very
example, you
dirty work clothes.
Some fabrics
lint collectors and
from other
are
fabrics, which
are
lint
which needs the
same
should not wash delicate
can pick up lint, dirt and colour
producers. Some examples are
WATER TEMP. SELECTOR
Used to select proper water
temperature of
washing water.
[Warm Hot Cold Warm
(Hot and Cold light on)] mode repeats.
listed below.
LINT COLLECTORS
LINT PRODUCERS
Corduroy
Synthetics
Towels
Permanent press fabrics
Chenille / Candlewick
Make
sure
Check if
Nappies
that you wash lint collectors
laundry
is washable in
separately from
Be
sure
to remove
keys, pins
laundry.
water.
lint
as
producers.
things
such
and coins from the
WASH
OPTION
to kinds of
Wash
oily or dyed laundry
arately.
sep-
Shake loose dirt off before
washing.
According
laundry, soiled extent
or washing habit you
can
select suitable
wash
option.
By pressing the button wash option is
changed GENTLE
SPIN
RINSE
WASH
Wash
8
fluffy laundry by turning
it inside out.
EXTRA
EXTRA
repeatedly.
WATER LEVEL
SELECTOR
Use to select the
proper amount of
water in relation to
the
of
weight and type
laundry.
Controlled
automatically in
Fuzzy program.
the
Manual control
Other programmes are selected
Press POWER ON button.
as
follows.
Load clothes.
Add
detergent,
Select
bleach and conditioner
as
desired.
temperature, level, process, program and options
as
described below.
Close the lid and press START/PAUSE button.
DETERGENT
VOLUME
DISPLAY
Used to indicate proper
detergent for
PROCESS
SELECTOR
Used to indicate the
Use to select the desired
amount of
time left of all Processes
each water level.
or
function among SPEEDY
SOAK, WASH, RINSE or
reservation.
SPIN.
START/PAUSE
BUTTON
Use to start
washing
porarily.
or
stop the
machine tem-
After 10 minutes in pause
state, the power is
automatically
DELAY START
Used to
reserve
CHILD LOCK
the time
Used to lock
or
unlock
when wash program
ends from now to pre-
the control buttons to
vent wrinkle while you
from
are
away for
a
prevent all the setting
while.
By pressing the button
changes [3 4
5...
12
48
14
16
HEAVY
once more
washing
:
3
step works
at
large
laundry
them
buttons
3] repeatedly.
to
and stain you can select
suitable program
locking, push both
simultaneously
and for unlocking push
child.
For
the time
According
yourself.
By pressing the button
washing program
changes in order of
[NORMAL SPEEDY
a
being changed by
PROGRAM
SELECTOR
in
process.
turned off.
POWER BUTTON
Power is
automatically
cut after the wash pro-
gram finishes.
WOOL
NORMAL] repeatedly.
and medium water level of NORMAL and HEAVY program.
9
NORMAL WASH PROGRAM
Use the Normal program for normal dirty laundry.
All conditions such as water level, wash time, rinse and
spin
time
are
automatically
selected
1
by microcomputer.
Press the POWER button.
All you have to do is press the START/PAUSE button.
Check to see if everything is ready.
Preset program
Deep1
gives
:
rinse
Warm wash water
...
see
the
(cold or hot water
following table 1.)
can
be set
optionally
Fuzzy wash
power is
indicator
lamp
illuminates when the
on.
Table 1. WASH WATER TEMPERATURE GUIDE
USED FOR
WATER TEMPERATURE
White and colour fast cottons, linens with heavy or normal soil.
Permanent press & synthetics with heavy or oily soil.
Hot
Dark
Warm
or
non-colour fast fabrics. White & coloured
synthetics.
Permanent press with normal or light soil.
Wool is only selected with warm.
Lightly
Cold
soiled fabrics.
Table 2. FILL TEMPERATURE OF EACH CYCLE FOR PROGRAM
For each program, the
washing
machine
automatically
selects
a
suitable fill water
temperature.
FILL TEMPERATURE
PROGRAM
APPENDIX EXPLANATION
WASH
Normal, Heavy,
Speedy
Wool
A wash
10
temperature
RINSE
Fill
HOT
WARM
COLD
COLD
WARM
temperature for wash is able
Fill cold for rinse is not able to
energy
WARM
to be selected is illuminated
to
change
washing style.
because of
change
saving.
Fill temperature is not able to
transformation.
during
for your
a
complete cycle
on
change
to
the control
protect laundry
panel.
2
in the wash bowl.
Put
laundry
Put
detergent
4 the display
or
in the wash bowl
instruction of
as
indicated
detergent
on
manufac-
3
Press the START/PAUSE button.
5
Close the lid.
turer.
Electric power is automatically out after
program finishes.
washing
11
SPEEDY WASH PROGRAM
Use this program for
soiled
washing slightly
laundry.
This program is economical because of its short
Adjust water
level
Preset program
according
gives:
to the amount of
washing
laundry.
time.
1Press
the power button
1Press
the power button
-3 minutes wash
-Deep1
rinse
-1 minutes
spin
-Warm water
(Cold
or
hot water
can
be set
optionally)
HEAVY WASH PROGRAM
Use this program for
overalls, jeans
washing heavily
soiled durable
garments such
as
etc.
All conditions such
as
water
level, wash time and spin time
are
automatically
sellected
Preset
by microcomputer.
program gives : -Deep
2 rinses
-4 minutes
spin
-Warm water
(Cold
or
hot water
can
be set
optionally)
4Press
the START/PAUSE
button.
CAUTION
Do not wash
12
an
electric mat
or
blanket.
2
PROGRAM
[CYCLE] selector
3
After
closing
the lid press the START/PAUSE
button.
Set the program selector to
2
Put
laundry
[SPEEDY] by pressing
Power goes off
finishes.
it.
in the wash bowl.
3
PROGRAM
automatically
after wash
[CYCLE] selector
Set the program selector to
it.
[HEAVY] by
pressing
Put
detergent
5 display
or
in the wash bowl
instruction of
as
detergent
indicated
on
the
manufacturer.
6
Close the lid.
Electric power is
washing
automatically
out after
program finishes.
13
WOOL WASH PROGRAM
Use this program for
washing
Do not wash woollens with
a
washable
woollens, less than 2.0kg.
dry cleaning
Do not set water level to medium
or
1Press
label attached.
the power button
below.
Wash clothes with buttons and accessories inside out.
Preset program
gives:
-6 minutes wash
-Deep
2 rinses
-1 minutes soft
-Large
spin
water level
-Warm water
NOTE
:
When you wish to
change washing cycles,
select them
manually.
SPEEDY SOAK WASH PROGRAM
Use this program for
washing heavily soiled laundry after soaking.
provides the best washing effect.
Do not use this program for washing laundry that may discolor.
Preset program gives: -30 minutes soaking
-Deep 1 rinse
This program
-Warm water
(Cold
14
or
hot water
can
be set
optionally)
1Press
the power button
2
PROGRAM
[CYCLE] selector
3
Press the START/PAUSE button after
closing
Set the program selector to
2
PROGRAM
[WOOL] by pressing
the lid.
Power goes off automatically
after wash finishes.
it.
[CYCLE] selector
3
After
closing the lid press the
START/PAUSE button.
Set the program selector to [SPEEDY
once until all the lights turn on.
SOAK] by pressing
it
Power goes off
finishes.
automatically
after wash
15
DELAY START WASHING PROGRAM
1Press
the power button ON.
2
Select program.
Select
a
desired
3
Select how many hours from
now you would like your wash
Program.
If not selected NORMAL program will be provided.
The
to finish.
When you
delay time
start for WOOL is not
delay
possible to prevent damage
laundry.
Set the time.
to
push the button
changes [3 4
the
5... 12 14 16... 48
3] repeatedly.
EX)
It's 7
a.m. now.
If
you'd
like your wash to finish at 9 p.m. set the time
14 hours
16
:
as
in the
figure
7 a.m.~9p.m.
below.
4
Put laundry and press the
START/PAUSE button.
Put laundry and press the
START/PAUSE button. The
washer
senses
laundry
and
mended
the amount of
displays recomamount of detergent.
The washer does not
amount of
laundry
sense
at WOOL
the
5
Deposit detergent.
Close the lid.
6
Pull the
detergent box forward
deposit proper amount of
detergent, then push back the
If the lid is not
and
closed, the machine generates
box.
If the lid is
Concentrated
detergent
is not
an
completely
alarm sound.
opened
START WASHING
suitable for DELAY START
DELAY
can
not
proceed.
WASHING.
program.
CAUTION
A wet
detergent box may cause the detergent
use powdered hand soap.
to
clump together.
Do not
If the lid is open, the machine will not
operate and
an error
signal
will sound.
When you would like to cancel this program press the POWER button OFF.
17
SELECTABLE WASHING METHODS
WASHONLY?
?
?
Press the power
button.
When wash
liquid
Set the WASH
pressing
is to be used twice.
position by
PROCESS
button.
RINSEONLY?
Press the power
button.
?
?
time the water in the
the lid.
When it is desirable to rinse clothes which have
Set the RINSE
pressing
DRAINorSPINONLY?
position by
PROCESS
?
?
pressing
button.
tub does not pump
already
Rinse ends.
PAUSE button after
time the water in the
the lid.
(At this
tub does not pump
or
spin
clothes
drying.
position by
PROCESS
out.)
been washed.
When it is desirable to drain water from the bowl
Set the SPIN
(At this
Press the START/
closing
before
18
Wash ends.
PAUSE button after
closing
button.
Press the power
button.
Press the START/
Press the START/
PAUSE button after
closing
the lid.
Spin
ends.
out.)
WASH&RINSE?
?
Press the power
button.'
?
When it is not desirable to
Press the power
button.
?
?
clothes in order to avoid wrinkles.
Set the WASH & RINSE
Press the START/
position by pressing
PAUSE button after
PROCESS button.
RINSE&SPIN?
spin
closing
When it is desirable to rinse and
spin
the lid.
clothes which have
Set the RINSE & SPIN
Press the START/
position by pressing
PAUSE button after
PROCESS button.
closing
Wash and rinse ends.
(At this
time the water in
the tub does not pump
already
been washed.
Rinse and
spin
end.
the lid.
19
WASHING PROCEDURE
Here is the
description
of
washing cycle programmed
Level
Washing
Setting
EX-LARGE
Rinsing
max.
9 min. min.
SMALL
Deep2
Spray rinse + Deep1
EX-LARGE
SPEEDY
DEEP1
3 min.
(3 min.)
SMALL
EX-LARGE
HEAVY
(PROCESS)
max.
9 min. min.
LARGE
SMALL
INFORMATION
Deep2
Spray rinse + Deep1
DEEP2
(3 min.a time)
Deep2
Spray rinse + Deep1
T752A
49 min.
~
~
34 min.
27 min.
29 min.
25 min.
~
~
21 min.
16 min.
61 min.
55 min.
1 min.
4 min.
~
~
39 min.
32 min.
39 min.
33 min.
83 min.
79 min.
(SOFT)
4 min.
~
~
64 min.
57 min.
:
required
cycle may differ depending on the water pressure. The time shown
Table is set under the situation of water supply for approx. 3min.per cycle(20 litres per minute
EX-LARGE water level).
for each
The indication shown
Spray
WF-T502A, T552A
53 min.
4 min.
1 min.
required(Approx.)
WF-T652A,
DEEP rinse is 3min a time
SOAK 30 min.
SOAK
The time
6 min.
EX-LARGE
SPEEDY
Spinning
DEEP rinse is 3min a time
21 min.
SMALL
WOOL
machine memory.
DEEP rinse is 3min a time
21 min.
NORMAL
NORMAL
washing
Time
Auto-Water
Programmed
Wash Cycles
into the
on
the
is the standard time.
by
rinse is carried out rinse
cycle
in accordance with
filling
water.
NOTE:
High water pressure may
if the noise is annoying.
20
cause
noise
during
the water
supply.
Turn the water
tap
to
adjust water supply
LOAD SIZE AND DETERGENT
Water level and wash bowl
SMALL
Water level will be automati-
cally
selected based
volume of clothes
the
on
LARGE
MEDIUM
EX-LARGE
WF-T653A
WF-T502A
WF-T653A
WF-T502A
WF-T653A
WF-T502A
WF-T653A
WF-T502A
T753A
T552A
T753A
T552A
T753A
T552A
T753A
T552A
in
placed
capacity
the wash bowl in the FUZZY
or
Approx.
44L
the HEAVY programs.
If the movement of the clothes
items until the clothes
move
stops,
freely
Approx.
29L
too much
clothing
Approx.
54L
Approx.
38L
has been
Approx.
64L
Approx.
55L
Approx.
78L
put into the machine. Remove
Approx.
61L
some
around the wash bowl.
Detergent
Use correct amount of
When
washing
detergent according
woollens remember to
to the
use a
detergent manufacturer's instruction.
detergent recommended by Australian Wool
Board
or
New
Zealand Wool Board.
We recommend the
use
of
detergent which
are
low
sudsing
and dissolve
readly
to obtain the best wash
results.
Do not
use
too much
detergent,
Using powdered soap
When
powdered
soap flakes
which may
cause an over
sudsing problem
used the
following procedure
Set POWER button to "ON".
2
After the
3
When the soap flakes
4
Turn POWER button to "ON" and select the desired automatic
add the soap flakes and
are
rinsing efficiency.
flakes
are
1
agitating starts,
and decrease
operate for
should be followed.
2 minutes.
dissolved turn POWER button to "OFF" and load the
menu
laundry.
then press START/PAUSE button.
To dissolve the soap flakes quickly, prepare 5L of warm water and gradually stir in the desired amount of
flakes. Then add to the wash bowl and proceed with your cycle selection.
CAUTION
Since soap flakes are more liable to remain in clothing
and bad odour may occur unless the clothing is rinsed
If
compared to synthetic detergent, yellowing
sufficiently.
soap flakes are directly poured into water at a
excessive amount of soap flakes are used or
temperature, soap content and soap dregs adhere to the inside of the
an
low
the float
Do not
making
the
hose, wash bowl and
laundry dirty.
soap flakes in the following
When the soak wash is used yellowing
use
cases.
or
blackening
may
occur
due to the
long
term
SOAK WASH action.
21
HOW TO USE THE BLEACH AND THE SOFTENER
How to
When
the bleach agent
use
using bleach, always
make
Pour the
clothes
sure
powdered bleaching agent
only for bleaching.
Pour the
liquid bleaching agent
it is
after
into the
oxygenated
Using fabric softener
Spin
Bleach Inlet
the
separating
washing
bleach.
()
cask.
(For detailed description,
refer directions
on
fabric softener
container.)
basket
Remove the softener cup by pulling out in the direction of the
Put fabric softener into the cup and return it to the orig-
arrow.
inal
position
before
The fabric softener
starting the wash.
is automatically dispensed
at the last rinse
cycle.
Do not add too much softener.
Refer to the softener manufacturer's instructions.
()
Softener
NOTE
Cup
: It is not neccessary to
cup for
always
filling, however,
periodically
for
remove
the softener
it should be removed
cleaning.
CAUTION
Don't
When
When
detergent. Use softener in last rinse water.
using dispenser, dilute softener(30ml) with fresh water(30ml)
filling dispenser, do not splash or overfill. It may stain clothes.
use
softener with
Never pour fabric softener and bleach
directly on clothes. It may stain them.
spotting
dishwashing liquid (or mild bar soap) and rewash.
Opening the lid during the spin cycle will quicken the softener deposit time, lowering its effect.
Do not leave the washer for more than a day after depositing fabric softener into the tub.
The effect of softening is changeble to position of inlet box and wash bowl.
If
occurs, wet and rub hand
Selectable washes described in page 16 & 17
22
are
not
designed
to be used with the fabric softener.
CHILD LOCK OPTION
To
guard against
unwanted alteration of
cycle settings during operation
the child lock
option
may be utilised.
HOW TO LOCK
1Press
the POWER
Press the START/PAUSE
2
button
after all
set
key
conditions
washing
according to the
are
manual.
3
Press both the PROCESS
key and the
key simultaneously while
wash is proceeding, then all the keys
are locked until completing the wash
program or unlocking them.
PROGRAM
Preset all washing
conditions.
"CJ" and the remaining time are
altematively shown on the display.
HOW TO UNLOCK
If you want to unlock
during
wash press both the water
temp key and the
water level
key simultaneously again
WASH OPTION
One
or more
wash
options
changed
Wash program is
EXTRA WASH
:
can
as
be selected for every washing program.
according to sellected wash options.
follows
Gives additional 3 min wash
eg.)
If extra wash is selected for loads that
Wash time is
EXTRA RINSE
:
Gives additional
eg.)
:
Gives
eg.)
one
deep
deep
require
during the heavy program.
(normal time)
extra water
to 24 min instead of 21 min.
rinse
If extra rinse is selected in the
one
GENTLE SPIN
changed
fuzzy
program it
gives
two
deep
rinses instead of
rinse.
gentle spin
instead of normal
spin.
If both extra wash and extra rinse
are
selected for loads that
require
extra water
the
during
heavy program. It gives 24 min wash instead of 21 min normal wash
and two deep rinses instead of one normal deep rinse.
23
MAINTENANCE
CLEAN THE FILTER IN THE VALVE
Clean the filter when water
1Disconnect
supply
the power cord.
2
into the tub appears dirty or the inlet valve is clogged with impurity.
Pull out the filter from the
Use a tooth brush to get rid of
3
inlet valve.
dirt.
Replace
it.
CLEAN THE LINT FILTER
out the waste thread collec-
1Pull
tion net from the tub in the direction of the
arrow
2
Turn inside out to
rid of filth.
get
3
Insert it into the
original
location.
below.
CLEAN THE CABINET
Wipe
with
stains from the cabinet and the control
a
soft cloth.
panel
CAUTION
Do not pour water directly on the cabinet.
Do not wipe the cabinet with benzine, thinner,
cleanser, alkaline detergent or wax.
Do not rub the cabinet with
When you use
instructions.
24
a
chemical
a
scrubbing
dustcloth,
brush.
follow the
CLEAN THE PUMP CASING
1
Unfasten 2
screws on
the back
cover.
2
(when drainage is bad)
Turn the cap as indicated
the arrow and unfasten it.
Remove
as
foreign objects
pins, buttons, coins;
by
3
Reassemble the cap as indicatby the arrow and fasten it.
ed
such
etc.
(Bottom view)
CAUTION
Check it
:
over
if water leaks after
(Bottom view)
reassembling.(Rubber ring
is in the
cap)
WHEN THERE IS A FEAR OF FREEZING
1 Close the
2 Hold the
water
water
taps and
supply
remove
hoses
as
the water
supply
shown in the
hoses.
drawing
so
that it does
not sag.
3
Set the POWER button to "ON" and the WATER TEMP. to
warm.
4 Press START/PAUSE button and operate the washing machine for
20 seconds.
Water which remains in the water
5 Press START/PAUSE button
6
to
supply
is removed.
stop the operation.
Lower the drain hose and select manual
spin
7 Press START/PAUSE button and operate for
mode.
30 seconds.
Set the POWER button to "OFF".
Drain the water in the bowl and the drain hose.
IF FROZEN
1 Remove the
water
supply hose,
and immerse it in
hot water at approx. 40°C.
2 Pour approx.
2 liters of hot water at approx.
40°C,
into the bowl for 10 minutes.
3
Connect the water
confirm that the
and
drainage
supply hose to the water tap, and
washing machine performs the supply
of water.
25
TROUBLE-SHOOTING GUIDE
If
an abnormal symbol appears in the display window, check the following before asking for service.
Request for the service center or agent in the case of failure or damage except for the following.
This appliance is fitted with a safety function that automatically stops the operation of the washing machine
when it is exposed to heavy disturbance on the mains.
TROUBLES
No water
CHECK UP
supply
Is
tap turned off?
Is the water
supply
cut off?
Is the
tap frozen?
No drain
Check if electric
Check that the drain
Is the drain hose
Check whether the
power has gone off.
hose is not twisted
hung properly?
drain pump is locked
or
kinked?
No
by foreign objects.
spinning
Is the wash load
unevenly balanced?,
evenly & close the
redistribute the load
Is the lid closed?
lid.
Power failure?
Fuse blown
No power
or
check
circuit breaker?
Is the power button on?
Is the power cord
or switched off?
unplugged
Not
working
Has the START/PAUSE button
been
Is the water shut off?
A
high
Is the water level normal?
level of vibration
and noise
during spin-
ning.
Is the
washing
installed
on a
Others
ASK FOR SERVICE
26
pressed?
The power will automatically
shut down after 10 minutes.
machine
correctly
firm and level surface?
SPECIFICATIONS
Inlet water pressure
max
800 KPa
min 30 KPa
H
(115 psi)
(4 psi)
M90-12m Standpie inmuhegtofaps clrhetofmain
1 50m
Alowingfor adjustblef t
Electricity supply
240V
50 Hz sinusoidal
D
W
Model
WF-T502A
WF-T552A
Type
Fully
Washing capacity
5.0
Electrical
See the
ratings
Standard amount of water
5.5
kg
Washing system
Water tap pressure
Weight
attached to the
Automatic
(W
6.5
kg
rating plate
WF-T753A
automatic washer
Approx. 61L
(EX-LARGE water level)
Outer dimension
WF-T653A
7.5
kg
rear
kg
of the washer
Approx. 78L
reverse
pulsator type
30-800kPa(0.3-8kgf/cm2)
D
H)
540
×
540
32
×
850mm
kg
590
×
606
×
958mm
41
kg
27
P/No.: 3828EA3019J
Download PDF

advertising