LG | WF-T853 | LG WF-T853 Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T853
Please read this manual
carefully
and retain it for future reference.
P/No.: 3828FA3848V
before
operating your
set
CONTENTS
FEATURES
CAUTION
FEATURES
.........................................................................................
3
IMPORTANT SAFETY PRECAUTION................................................ 4
"Turbo Drum" washer doesn't operate during the lid opened. When the lid is
open during the wash, rinse and spin cycle, the operation stops for safety.
Fuzzy logic
A load
PARTS NAME
.....................................................................................
6
INSTALLATION................................................................................... 7
AUTOMATIC AND MANUAL PROGRAMMING.................................10
set
sensor
&
control
a
micro processor in the controller detect
optimum washing
conditions such
as
technology in
electronic control system provides
the best washing performance.
water
laundry
load and
level, wash time etc.
The most advanced
START
SENSING
SETTING
Laundry Sensor
Optimum
Washing
Water Level Sensor
Condition
WASHING
AUTO
POWER
OFF
NORMAL WASH PROGRAM.............................................................12
SPEEDY/HEAVY WASH PROGRAM
WOOL/SOAK WASH PROGRAM
...............................................
.....................................................
DELAY START WASHING PROGRAM
............................................
14
16
18
Turbo drum
When "Punch
WASHING PROCEDURE
..............................................
.................................................................
LOAD SIZE AND DETERGENT
........................................................
HOW TO USE FABRIC SOFTENER AND BLEACH
CHILD LOCK / WASH OPTION
MAINTENANCE
........................
........................................................
................................................................................
20
22
23
24
25
26
3"
tub turns in the
The
SELECTABLE WASHING METHODS
washing
washing wings turns, the washing
opposite direction. This makes the
both sides current of water which improve wash-performance by rubbing clothes strongly.
+
wash-performance gets
course
which
cones
from
a
more
by falling
water-
small waterfall in the
washing tub,
Innovated washing wings
Three small
washing wings generate strong and
sharp washing currents to clean laundry uniformly.
Adjusted vertical movement and rotating direction
of the washing punch reduces laundry entanglement and improves washing power.
TROUBLE-SHOOTING GUIDE......................................................... 28
SPECIFICATIONS
............................................................................
29
Strong showering water supply
Strong showering removes detergent
improved rinsing effects.
and naps to
ensure
Device for removing naps
Lint filter catches naps and thread
ing washing
to make the
laundry
generated
dur-
cleaner.
2
P/No.
3
3828FA3848V
P/No.
3828FA3848V
Never touch the clothes in the bowl during
operation or until the bowl stops rotating.
Even when
around your
rotating slowly,
fingers, which
Don't put hand(s)
operation.
Rotating parts
may
the clothes may wrap
is
dangerous.
under the washer
injure
your
during
hand(s).
The
young children
the
The washer may be deformed
out.
fire(a heater,
Don't put kerosene, gasoline, benzine,
thinner or clothes containing these chemicals into the washer.
explosion might
After
fire may break
result.
objects
on or
apply pres-
forcibly,
as
it may break.
tap.
of time.
Don't press the switches and/or the panel
with a sharp object, i.e mechanical pencil.
Switch and/or
panel damage
or a
malfunction may
result.
Don't install the washer where it would be
to direct sunlight.
exposed
Plastic
Don't
Turn the POWER button "OFF" at the wall power
not be using the machine for a
To
Don't bend the lid
If
outlet, if you will
long period
Don't rest heavy
to the lid.
sure
parts and the painted cabinet may be
deformed and/or fade.
washing
Close the water
or a
is not intended for use by
or infirm persons without
supervision.
Young children should be supervised
to ensure that they do not play with the
appliance.
An
Keep washer away from
burning cigarette, etc.).
appliance
spin-dry
starched clothes.
only
half the normal amount of
Otherwise, starch adhering
Plastic
hot water.
parts of the washer may be deformed
or
damaged.
Don't
spined by mistake, operate the washer without
load with
Don't use excessively
(above 70°C)
use
The rubber
strong alkaline detergents.
parts may be damaged.
detergent.
to the bowl may soil
other clothes.
prevent water leakage, fire, electric shocks,
etc.
OFF
OFF
OFF
4
P/No.
5
3828FA3848V
P/No.
3828FA3848V
INSTALLATION
PARTS NAME
Powder
HOT WATER SUPPLY
box for
HOSE
detergent
delayed
washing/ softener
How to install the drain hose
1. Fit the machine end of the drain hose to the outlet of the drain
box
pump and
COLD WATER SUPPLY
Within 50mm
INLET HOLE FOR
Make
BLEACH
does not leak.
sure
the water
Push
Clean
regularly
linting
on
Drain Hose
Hose
LINT FILTER
to
2. Put the other end of the drain hose
Holes
Guide
the clothes
3. Fit the
0.9~
or
stop the
Check if the drain hose
WASHING WINGS
Vertical movement of
To
tub before
more
laundry
operating the
machine.
If the supply cord is
damaged, it must be
replaced by the manufacture
or
laundry.
its service
agents
similarly qualified
or
person
in order to avoid a hazard.
LEVELLING LEGS
Use to level the
than 50
mm
wash
rear
of
to fit at either direction
not extend
from the end of the hose
discharge height
should be
guide.
approximately 0.9~1.2m
Flooding drainage
You machine
requires
floor
a
drainage slope (or hole)
that will SAFELY DISPOSE of the FULL FLOW of any water
that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make
that will
(or slope)
prevent any possibility of
water
sure
damage
this machine is installed in
to floor
coverings
Connect inlet hose
washing
machine for correct balance
or
an area
with
a
drain hole
property.
MACHINE END
BASE
spin operation.
Check that
sealing washers
are
firmly
Accessories
Inlet hose
Drain hose
TAP
END
INLET
VALVE
be attached to hot inlet valve and tap.
taps and check for leaks. Tighten the coupling nuts firmly if there
is any leakage. If water pressure is strong, close the water tap completely
on
TWIST
the
Either hose
Turn
SEALING
WASHER
washing machine;
coupling nuts securely by hand. (Fig. 1)
Attach the straight end of the hose to the tap.
Tighten the coupling nuts securely by hand. (Fig. 2)
Tighten
TAP
SEALING
WASHER
seated.
Attach the curved end of the hose to the inlet valve of the
Height adjustment
plate
holder into either holes for the holder at the
prevent syphoning, the drain hose should
The
POWER PLUG
water may increase
of
or
from the floor.
Set the proper water level,
an excessive amount of
entanglement
standpipe
NOTE:
is located in the
washing
washing punch can be
operated when a sufficient
amount of laundry is
deposited.
&
Holes for the Holder
DRAIN HOSE
machine tem-
the
possible
according to location of the standpipe. Make sure that the holder
keeps firmly the drain hose so that the drain hose should not fall
down as shown in the fig.
BUTTON
Use to start
plastic
the machine. The holder is
1.2m
START/PAUSE
over
tub.
For Holder
stop
load.
washing
porarily.
clamp.
Holder
HOSE
FUNCTION SELECTOR
the
tighten
can
INLET
HOSE
the
then open it
(Fig. 1)
slightly.
Do not install the washer where it is
CAUTION
directly exposed to sunlight, wind,
(Fig. 2)
rain etc.
Plug the
power cord of this washer into a properly installed standard power
Permissible water temperature : Max 70°C(160°F)
point that
is switched & earthed.
Permissible water pressure : Max 116psi (800kpa, 8kg/cm2), Min 4psi (30kpa, 0.3kg/cm2)
If water temperature & pressure is greater than above, it may cause damage to the machine. If you have
uncontrolled water temperature & pressure you should fit a temperature & pressure relief valve to ensure that
1 Each for cold and
2 Pieces
hot water
water
temperature
& water pressure remains within the safe limits. Consult
Do
adjust water temperature and pressure.
not over tighten the coupling nuts with a tool. Inlets
a
plumber or electrician
are
plastic
:
Do not
strip
or
are
crossthread.
6
P/No.
if you
unable to
7
3828FA3848V
P/No.
3828FA3848V
INSTALLATION
Improper
installation of the washer may
1. The
cause
noise and
in the base
ventilating openings
on a carpeted floor.
Install the washing machine on
area
malfunctioning.
must not be obstructed
by carpeting
when the
washing
machine is
installed
CAUTION
2.
a
level and
1Installation
firm surface.
Install the washer
How to
adjust
Checking
2
area
on
Open
flat and firm surface.
3
the
leveled
level
level
lid, and check if the washer is correctly
by looking down from the top.
Adjust the drop of the
4
Horizontal
Lift up the front of the washer and
the level indicator to the center by
adjustable legs
confirming
5
setting
clockwise
or
adjust the drop of
turning the
using the adjusting plate.
as
in
Check if installation surface is tilted.
(Try to shake the
firmly installed.)
level
2.
figure
level.)
washer and check if the washer is
level indicator to the red circle.
6
Place the washer to
level
Checking slope
original position and confirm
(Try to shake the washer and
Distance between drain hose and the wall
Distance between drain hose and the wall should be
the
more
than 10cm, and the distance between the other
the rear part and the wall should be more
confirm the
part
Check the location of the
than 2
or
cm.
More than 10cm
level in the front of washer.
Adjustable leg
More than 2cm
Turn the
adjustable legs
horizontal(2EA).
Horizontal
to set the washer
More than 2cm
setting
CAUTION
If the
core
Location of
Cause
drop
When the front is lower.
When the
rear
(Example)
To
move
plate,
the
drop
and turn the
right
with the
adjusting plate
supporting plate.
rear
the
Adjust the left part of
the supporting plate.
Adjust
is lower.
adjustable legs
Adjust the front adjusting plate
or adjust the adjustable legs.
Adjust
or adjust
is lower.
of the level indicator
adjust
the
When the left is lower
When the
How to
or
by
the
1.5
mm:
Use two
front and
adjusting plates
adjustable legs(2),
Use the
leg's
rear
and
adjusting plates
rear
a
is
supplied
splashing
or
or
from
electrical
ingress
a
cord extension set
portable
or
electrical
outlet device should be
portable outlet device the
positioned so it is not subject
of moisture.
adjustable legs(2),
How to
with the
the front and
the right part of the
supporting plate.
to
appliance
extension set
10
use
the
adjusting plates
adjusting plates
to level the washer when the
adjustable
cannot cover the gap.
or
adjusting plates
mm
supporting
2-3 times.
8
P/No.
9
3828FA3848V
P/No.
3828FA3848V
AUTOMATIC AND MANUAL PROGRAMMING
Fully automatic control
The
Fuzzy
washing.
program is used for average
Manual control
day
to
Close the lid and press START/PAUSE button.
lights will scroll up and down while
day
Press POWER ON button.
the washer is
Load clothes.
for your clothes load.
Add
Other programmes are selected
Press POWER ON button.
The water level
detergent,
bleach and conditioner
as
working
out the
optimum
water level
washing
Each load of
washing
washing
into
desired.
same
you should not wash delicate
work clothes.
from other
fabrics, which
are
lint
DETERGENT
VOLUME
WATER TEMP. SELECTOR
Used to select proper water
example,
clothes with very dirty
Some fabrics are lint collectors and
bleach and conditioner
desired.
as
temperature, level, process, program and
Close the lid and press START/PAUSE button.
which needs the
clothing
detergent,
Select
separate wash loads
should contain
conditions. For
follows.
Load clothes.
Add
Preparation before wash
Sort your
as
pick up lint, dirt and colour
producers. Some examples are listcan
temperature of
as
described below.
PROCESS
SELECTOR
DISPLAY
Used to indicate proper
detergent for
washing water.
[Warm Hot Cold Warm
(Hot and Cold light on)] mode repeats.
options
Used to indicate the
Use to select the desired
amount of
time left of all Processes
each water level.
or
function among SOAK,
WASH, RINSE or SPIN.
reservation.
LINT PRODUCERS
Corduroy
Synthetics
Towels
Permanent press fabrics
Chenille / Candlewick
Make
sure
separately from
lint
HOT
-
DETERGENT
EX
EXTRA WASH
COLD
EXTRA RINSE
M
is washable in
Be
sure
to remove
keys, pins
laundry.
as
oily or dyed laundry
arately.
sep-
things
such
Shake loose dirt off before
washing.
it inside out.
Wash delicate
ping
them in
a
WATER
LEVEL
SOAK
SPEEDY
WASH
HEAVY
RINSE
WOOL
SPIN
START
PAUSE
PROGRAM
PROCESS
DELAY
START
and coins from the
WASH
OPTION
WATER LEVEL
According to kinds
laundry, soiled
extent or washing
clothes, wrap-
nylon
net.
SELECTOR
DELAY START
Use to select the
Used to
proper amount of
water in relation to
when wash program
ends from now to pre-
the control buttons to
habit you can select
suitable wash
the
vent wrinkle while you
from
option.
By pressing the button wash option is
changed GENTLE
Controlled automat-
RINSE
WASH
EXTRA
EXTRA
of
weight
laundry.
ically
and
in the
program.
type
are
Fuzzy
reserve
away for
a
the time
CHILD LOCK
of
SPIN
fluffy laundry by turning
MIN.
WATER
TEMP.
WASH
OPTION
water.
HOUR
TIME
LEFT
S
LEVEL
NORMAL
DELAY.
L
GENTLE SPIN
Wash
while.
By pressing the button
changes [3 4
the time
5...
48
12
14
16
3] repeatedly.
Used to lock
or
unlock
prevent all the setting
According
to
laundry
and stain you can select
suitable program
locking, push both
simultaneously
and for unlocking push
yourself.
By pressing the button
washing program
changes in order of
SPEEDY
[NORMAL
them
HEAVY
a
being changed by
PROGRAM
SELECTOR
child.
For
buttons
ing
one more
process.
in wash-
POWER BUTTON
Power is
automatically
cut after the wash pro-
gram finishes.
WOOL
NORMAL] repeatedly.
repeatedly.
10
P/No.
turned off.
producers.
WATER
Wash
stop the
Nappies
that you wash lint collectors
laundry
washing
porarily.
or
machine tem-
automatically
WWARM
Check if
Use to start
After 10 minutes in pause
state, the power is
ed below.
LINT COLLECTORS
START/PAUSE
BUTTON
11
3828FA3848V
P/No.
3828FA3848V
Use this program for normal
All conditions such as water
spin
time
are
automatically
dirty laundry.
1
level, wash time, rinse and
selected
by microcomputer.
Press the POWER button.
2
Put
laundry
in the wash bowl.
3
Press the START/PAUSE button.
All you have to do is press the START/PAUSE button.
Check to see if everything is ready.
Preset program
1 spray rinse
gives
:
deep rinse
Warm wash water.(cold or hot water
see the following table 1.)
1
+
can
be set
TIME
LEFT
optionally
MIN.
...
START
PAUSE
Fuzzy wash
power is
indicator
lamp
illuminates when the
on.
Table 1. WASH WATER TEMPERATURE GUIDE
USED FOR
WATER TEMPERATURE
White and colorfast cottons, linens with heavy or normal soil.
Permanent press & synthetics with heavy or oily soil.
Hot
Dark
Warm
or
non-color fast fabrics. White & colored
Permanent press with normal or light soil.
only selected with warm.
Lightly
in the wash bowl
detergent
or
instruction of
as
indicated
detergent
on
manufac-
5
Close the lid.
turer.
synthetics.
WATER
Wool is
Cold
Put
4 the display
-
DETERGENT
EX
L
soiled fabrics.
M
S
Table 2. FILL TEMPERATURE OF EACH CYCLE FOR PROGRAM
For each program,
washing
machine
automatically
selects
a
suitable fill water
temperature.
FILL TEMPERATURE
PROGRAM
APPENDIX EXPLANATION
WASH
Normal, Heavy,
Speedy
Wool
A wash
temperature
RINSE
Fill
HOT
WARM
COLD
COLD
WARM
temperature for wash is able
Fill cold for rinse is not able to
energy
WARM
to be selected is illuminated
to
change
washing style.
because of
change
saving.
Fill temperature is not able to
transformation.
during
for your
a
complete cycle
on
change
to
the control
protect laundry
panel.
Electric power is automatically out after
program finishes.
12
P/No.
washing
13
3828FA3848V
P/No.
3828FA3848V
Use this program for
washing slightly
soiled
laundry.
This program is economical because of its short
Adjust water
level
Preset program
according to the amount
gives: -6 minutes wash
-1 deep rinse
-2 minutes spin
of
washing
laundry.
the power button
1Press
time.
PROGRAM
2
[CYCLE] selector
3
NORMAL
SPEEDY
HEAVY
-Medium water level
WOOL
-Warm water
(Cold
or
hot water
can
be set
optionally)
After
closing
the lid press the START/PAUSE
button.
Set the program selector to
Use this program for
overalls, jeans
soiled durable
garments such
as
water
level, wash time and spin time
by microcomputer.
gives : -2 deep
Preset program
are
Power goes off
finishes.
it.
automatically
after wash
as
etc.
All conditions such
sellected
washing heavily
[SPEEDY] by pressing
automatically
1Press
the power button
2
Put
laundry
in the wash bowl.
3
PROGRAM
[CYCLE] selector
NORMAL
SPEEDY
HEAVY
rinses
-4 minutes
WOOL
spin
-Warm water
(Cold
or
hot water
can
be set
optionally)
Set the program selector to
pressing it.
4Press
the START/PAUSE
button.
TIME
LEFT
MIN.
Put
detergent
5 display
WATER
-
or
in the wash bowl
instruction of
as
detergent
indicated
on
the
manufacturer.
6
[HEAVY] by
Close the lid.
DETERGENT
EX
START
PAUSE
CAUTION
Do not wash
L
M
S
an
electric mat
or
blanket.
Electric power is
washing
automatically
14
P/No.
out after
program finishes.
15
3828FA3848V
P/No.
3828FA3848V
Use this program for
washing
Do not wash woollens with
a
washable
woollens, less than 2.0kg.
dry cleaning
Do not set water level to medium
1Press
label attached.
the power button
2
PROGRAM
gives:
3
below.
or
NORMAL
Wash clothes with buttons and accessories inside out.
Preset program
[CYCLE] selector
SPEEDY
-6 minutes wash
HEAVY
-2 rinses
(Deep 2)
-1 minutes gentle spin
-Large water level
WOOL
-Warm water
NOTE
When you wish to
:
change washing cycles,
select them
manually.
Press the START/PAUSE button after
closing
Set the program selector to
Use this program for
washing heavily soiled laundry after soaking.
provides the best washing effect.
this program for washing laundry that may discolor.
This program
Do not
use
Preset program
gives:
-60 minutes
-1
deep
1Press
the power button
2
PROGRAM
soaking
hot water
3
SOAK
rinse
or
it.
[CYCLE] selector
WASH
-Warm water
(Cold
[WOOL] by pressing
the lid.
Power goes off automatically
after wash finishes.
can
be set
RINSE
optionally)
SPIN
After
the lid press the
START/PAUSE button.
Set the program selector to
all the lights turn on.
[SOAK] by pressing
it 6 times until
closing
Power goes off
finishes.
automatically
16
P/No.
after wash
17
3828FA3848V
P/No.
3828FA3848V
DELAY START WASHING PROGRAM
1Press
the power button ON.
2
Select program.
3
Set the time.
4
Put laundry and press the
START/PAUSE button.
DELAY.
NORMAL
DELAY.
SPEEDY
5
Deposit detergent.
6
Close the lid.
HOUR
HOUR
HEAVY
WOOL
Select
a
desired
Program.
If not selected NORMAL program will be provided.
Select how many hours from
now you would like your wash
Put laundry and press the
START/PAUSE button. The
to finish.
washer
senses
laundry
and
When you
delay time
The
delay start for WOOL is not
possible to prevent damage to
laundry.
push the button
changes [3 4
the
the amount of
displays
detergent.
recom-
Pull the
If the lid is not
and
detergent box forward
deposit proper amount of
detergent, then push back the
closed, the machine generates
box.
an
alarm sound.
If the lid is
mended amount of
completely
opened
START WASHING
DELAY
can
not
proceed.
5... 12 14 16... 48
3] repeatedly.
EX)
It's 7
a.m. now.
If
you'd
like your wash to finish at 9 p.m. set the time
as
in the
figure
below.
CAUTION
A wet
detergent box may cause the detergent
use powdered hand soap.
to
clump together.
Do not
DELAY.
If the lid is open, the machine will not
HOUR
14 hours
:
7 a.m.~9p.m.
operate and
an error
signal
will sound.
When you would like to cancel this program press the POWER button OFF.
18
P/No.
19
3828FA3848V
P/No.
3828FA3848V
WASHONLY?
?
?
When wash
Press the power
button.
liquid
?
?
WASH
RINSE
RINSE
SPIN
SPIN
position by
PROCESS
Press the START/
PAUSE button after
closing
the lid.
?
?
button.
tub does not pump
already
position by pressing
PAUSE button after
RINSE&SPIN?
?
?
When it is desirable to rinse and
RINSE
SPIN
SPIN
position by
Press the START/
Rinse ends.
PAUSE button after
time the water in the
closing
the lid.
(At this
tub does not pump
When it is desirable to drain water from the bowl
or
spin
clothes
closing
Wash and rinse ends.
the lid.
(At this time
Press the power
button.
out.)
WASH&SPIN?
?
?
spin
clothes which have
Set the RINSE & SPIN
Press the START/
position by pressing
PAUSE button after
PROCESS button.
closing
When
heavy soiling
is removed
prior
already
been washed.
Rinse and
spin
end.
Wash and
spin
end.
the lid.
to normal
washing
drying.
SOAK
SOAK
WASH
WASH
RINSE
RINSE
SPIN
SPIN
position by
PROCESS
Press the START/
PAUSE button after
closing
the lid.
Spin
ends.
Press the power
button.
Set the WASH & SPIN
Press the START/
position by pressing
PAUSE button after
PROCESS button.
closing
the lid.
21
20
P/No.
the water in
the tub does not pump
out.)
WASH
PROCESS
clothes in order to avoid wrinkles.
Press the START/
PROCESS button.
out.)
been washed.
spin
Set the WASH & RINSE
RINSE
Set the SPIN
pressing
time the water in the
Press the power
button.
SOAK
before
Press the power
button.
(At this
WASH
button.
DRAINorSPINONLY?
Wash ends.
SOAK
Set the RINSE
pressing
When it is not desirable to
SOAK
When it is desirable to rinse clothes which have
Press the power
button.
?
WASH
button.
RINSEONLY?
?
SOAK
Set the WASH
pressing
WASH&RINSE?
is to be used twice.
3828FA3848V
P/No.
3828FA3848V
WASHING PROCEDURE
Here is the
description
of
washing cycle programmed
Auto-Water
Programmed
Wash Cycles
Level
Setting
into the
Washing
EX-LARGE
washing
machine memory.
Rinsing
Water level and wash bowl
Spinning
Time
required
(Approx.)
max.
9 min. min.
SMALL
4 min.
Deep2
Spray rinse + Deep1
cally
selected based
volume of clothes
the
on
MAL
~
or
the HEAVY pro-
6 min.
2 min.
(3 min.)
HEAVY
(PROCESS)
DEEP rinse is 3min a time
21 min.
SMALL
4 min.
Deep2
Spray rinse + Deep1
washing
move
stops,
freely
LARGE
6 min.
SOAK 60 min.
SMALL
INFORMATION
The time
94L
too much
clothing
has been
put into the machine. Remove
1 min.
(SOFT)
Deep2
Spray rinse + Deep1
50 min.
123 min.
4 min.
~
96 min.
to the
use a
detergent manufacturer's instruction.
detergent recommended by Australian Wool
Board
or
New
of
use
detergent which
are
low
sudsing
and dissolve
readly
to obtain the best wash
Do not
use
too much
detergent,
powdered
soap flakes
which may
cause an over
sudsing problem
used the
should be followed.
following procedure
Set POWER button to "ON".
2
After the
3
When the soap flakes
4
Turn POWER button to "ON" and select the desired automatic
add the soap flakes and
are
rinsing efficiency.
flakes
are
1
agitating starts,
and decrease
operate for
2 minutes.
dissolved turn POWER button to "OFF" and load the
menu
laundry.
then press START/PAUSE button.
To dissolve the soap flakes quickly, prepare 5L of warm water and gradually stir in the desired amount of
flakes. Then add to the wash bowl and proceed with your cycle selection.
:
required
cycle may differ depending on the water pressure. The time shown
Table is set under the situation of water supply for approx. 3min.per cycle(20 liters per minute
EX-LARGE water level).
for each
The indication shown
by
on
the
is the standard time.
CAUTION
Since soap flakes are more liable to remain in clothing compared to
and bad odor may occur unless the clothing is rinsed sufficiently.
If
the float
NOTE:
High water pressure may cause noise
if the noise rather annoying.
during
the water
supply.
Turn the water
tap
to
adjust water supply
synthetic detergent, yellowing
excessive amount of soap flakes are used or soap flakes are directly
temperature, soap content and soap dregs adhere to the inside of the
an
low
making
poured
hose,
into water at
a
wash bowl and
the
laundry dirty.
Do not use soap flakes in the following cases.
When the soak wash is used as yellowing or blackening
may
occur
due to the
long
term
SOAK WASH action.
22
P/No.
some
results.
49 min.
DEEP rinse is 3min a time
EX-LARGE
SOAK
(3 min.a time)
Approx.
70L
detergent according
Using powdered soap
WOOL
Approx.
55L
around the wash bowl.
woollens remember to
We recommend the
~
When
DEEP2
Approx.
40L
Zealand Wool Board.
81 min.
max.
9 min. min.
Approx.
Detergent
Use correct amount of
EX-LARGE
EX-LARGE
32 min.
When
NORMAL
LARGE
grams.
items until the clothes
MEDIUM
MEDIUM
in
placed
If the movement of the clothes
SPEEDY
SMALL
the wash bowl in the NOR-
36 min.
DEEP1
capacity
Water level will be automati-
63 min.
DEEP rinse is 3min a time
21 min.
NORMAL
LOAD SIZE AND DETERGENT
23
3828FA3848V
P/No.
3828FA3848V
HOW TO USE THE BLEACH AND THE SOFTENER
CHILD LOCK OPTION
To
How to
use
guard against
unwanted alteration of
cycle settings during operation
the child lock
option
may be utilised.
the bleach agent
HOW TO LOCK
In the
case
Put the
Put the
of
using
the
bleach, it is necessary
powdered bleaching agent
liquid bleaching agent
after
to use the
separating
oxygenated
the clothes
only
bleach.
for
1Press
the POWER
2
button
bleaching.
Press the START/PAUSE
after all
set
into the bleach inlet.
washing
according to the
Preset all
Bleach inlet
key
conditions
are
3
manual.
Press both the PROCESS
key and the
key simultaneously while
wash is proceeding, then all the keys
are locked until completing the wash
program or unlocking them.
PROGRAM
washing
conditions.
TIME
LEFT
MIN.
START
PAUSE
"CJ" and the remaining time are
altematively shown on the diplay.
HOW TO UNLOCK
If you want to unlock
How to
use
Pull and open the
Put the
the softner agent
detergent
enough agent
Put the box
slowly
box in the direction of
under the standard line
and
smoothly
as
not to make the
arrow as
indicated at
indicated at the
agent flow
One
picture.
or more
wash
options
changed
Wash program is
picture.
over.
EXTRA WASH
:
inlet
EXTRA RINSE
:
Limited line
If the softner is
it
can
flow
over
detergent
box
temp key and the
water level
key simultaneously again
put,
can
as
be sellectable for every washing program.
according to sellected wash options.
follows
It gives additional 3 min wash
ex) If extra wash is sellected for extra-large water
wash time is changed to 24 min instead of 21
It gives additional one deep rinse
ex) If extra rinse is sellected in the
one deep rinse.
needed
min.
laundry in the heavy program
(normal time)
NORMAL program it
gives
two
deep
rinses instead of
over.
GENTLE SPIN
Powder
wash press both the water
WASH OPTION
Softner cap
Detergent
during
Softner inlet
:
It
gives gentle spin instead of normal spin.
ex) If both extra wash and extra rinse are sellected for extra-large water needed laundry in
the heavy program, it gives 24 min wash instead of 21 min normal wash and two deep
rinses instead of one deep rinse.
CAUTION
The softner is to be inserted
automatically with the alarming
manually inserted.
sound at the last time of rinse
except for
selectable wash for which it is to be
Insert the softner
yourself at the
last time of rinse since softner
can
be failed to be inserted
automatically
when the water pressure is weak (less than 0.5kgf/cm2).
Do not leave the washing machine with the softner in it more than 2
days. ( It could fail to insert softner by
softner.)
solidating
softner directly to the clothes. (the clothes can be damaged of discolored.)
itself when left with softner because of the
Do not
put the bleach and
of
24
P/No.
25
3828FA3848V
P/No.
3828FA3848V
MAINTENANCE
CLEAN THE FILTER IN THE VALVE
Clean the filter when water
1Disconnect
supply
the power cord.
2
into the tub is bad
CLEAN THE PUMP CASING
or
the inlet valve is
Pull out the filter from the
3
inlet valve.
clogged
Use
dirt.
a
with
impurity.
tooth brush to
Replace
get rid of
1
Unfasten 2
screws
of the back
2
cover.
(when drainage is bad)
Turn the cap to the arrow
direction and unfasten it.
Remove
it.
as
foreign objects
pin, button, coin; etc.
3
Reassemble the cap to the
direction and fasten it.
arrow
such
(Bottom view)
CAUTION
CLEAN THE LINT FILTER
1Pull
out the waste thread collec-
tion net from the tub like the
arrow
2
:
Check it
over
if water leaks after
(Bottom view)
reassembling.(Rubber ring
is in the
cap)
WHEN THERE IS A FEAR OF FREEZING
Turn inside out to
get
3
rid of filth.
Insert it to the
original
location.
direction below.
1
Close the water
2
Hold the water
taps and
supply
remove
hoses
as
the water
supply
shown in the
hoses.
drawing
so
that it does
not sag.
3
Set the POWER button to "ON" and the WATER TEMP. to
4
Press START/PAUSE button and
warm.
operate the washing machine for
20 seconds.
Water which remains in the water
supply
5
Press START/PAUSE button to
6
Lower the drain hose and select manual
7
is removed.
stop the operation.
Press START/PAUSE button and
spin
operate for
mode.
30 seconds.
Set the POWER button to "OFF".
Drain the water in the bowl and the drain hose.
CLEAN THE CABINET
Wipe
with
stains from the cabinet and the control
a
panel
CAUTION
soft cloth.
Do not pour water
inet.
Do not
wipe
directly
on
IF FROZEN
the cab-
1
the cabinet with
benzine,
thinner, cleanser, alkaline detergent
2
or wax.
a
scrub-
brush.
When you use a chemical
follow the instructions.
supply hose,
and immerse it in
Pour approx. 2 liters of hot water at approx.
40°C,
into the bowl for 10 minutes.
Do not rub the cabinet with
bing
Remove the water
hot water at approx. 40°C.
dustcloth,
3
Connect the water
confirm that the
and
drainage
supply hose to the water tap, and
washing machine performs the supply
of water.
27
26
P/No.
3828FA3848V
P/No.
3828FA3848V
TROUBLE-SHOOTING GUIDE
If
a
abnormal
Request
symbol appears in the display window, check the
for the service center or agent in the case of failure or
SPECIFICATIONS
following before asking for service.
damage except for the following.
Inlet water pressure
max
TROUBLES
No water
CHECK UP
(115 psi)
(4 psi)
supply
Is
tap turned off?
Is the water
supply
cut off?
Is the
120 m
Check if electric
Check that the drain
Is the drain hose
Check whether the
power has gone off.
hose is not twisted
hung properly?
drain pump is locked
or
kinked?
M90-12m Standpie inmuhegtofaps clrhetofmain
tap frozen?
No drain
No
800 KPa
min 30 KPa
by foreign objects.
1 50m
10 7m Alowingfor
adjustblef
spinning
Is the wash load
unevenly balanced?,
evenly & close the
redistribute the load
Is the lid closed?
Electricity supply
lid.
625mm
Power failure?
Fuse blown
No power
or
240V
50 Hz sinusoidal
625mm
check
circuit breaker?
Is the power button on?
Is the power cord
or switched off?
Model
unplugged
WF-T853
Type
automatic washer
Fully
START
PAUSE
Not
working
Has the START/PAUSE button
been
Is the water shut off?
Is the water level normal?
pressed?
The power will automatically
shut down after 10 minutes.
8.5
Washing capacity
Electrical
See the
ratings
Standard amount of water
(EX-LARGE
water
level)
Standard amount of water used
A
high
(NORMAL cycle)
level of vibration
and noise
during spin-
ning.
Is the
washing
installed
on a
machine
correctly
firm and level surface?
ASK FOR SERVICE
attached to the
rear
Approx. 94L
Approx. 190L
Automatic
Water
30-800kPa(0.3-8kgf/cm2)
tap pressure
Weight
reverse
pulsator type
625×625×1007(W×D×H)mm
47kg
28
P/No.
of the washer
Washing system
Outer dimension
Others
rating plate
kg
29
3828FA3848V
P/No.
3828FA3848V
Download PDF