LG | WF-T851 | LG WF-T851 Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T851
Please read this manual
carefully
and retain it for future reference.
P/No.: 3828FA3848U
before
operating your
set
CONTENTS
FEATURES
CAUTION
FEATURES
.........................................................................................
"Turbo Drum" washer doesn't operate during the lid opened. When the lid is
open during the wash, rinse and spin cycle, the operation stops for safety.
3
IMPORTANT SAFETY PRECAUTION................................................ 4
Fuzzy logic control
A load
PARTS NAME
.....................................................................................
6
INSTALLATION................................................................................... 7
AUTOMATIC AND MANUAL PROGRAMMING.................................10
set
micro processor in the controller detect laundry load and
washing conditions such as water level, wash time etc.
sensor
optimum
&
a
The most advanced
electronic control
the best
technology
in
system provides
START
washing performance.
SENSING
SETTING
Laundry Sensor
Optimum
Washing
Water Level Sensor
Condition
WASHING
AUTO
POWER
OFF
NORMAL WASH PROGRAM.............................................................12
HEAVY WASH PROGRAM............................................................... 14
SPEEDY WASH PROGRAM
WOOL WASH PROGRAM
............................................................
...............................................................
16
18
Turbo drum
When "Punch
DELAY START WASHING PROGRAM
SOAK WASH PROGRAM
................................................................
SELECTABLE WASHING METHODS
WASHING PROCEDURE
............................................
..............................................
.................................................................
WATER LEVEL AND AMOUNT OF DETERGENT
...........................
20
22
washing
washing wings turns, the washing
tub turns in the opposite direction. This makes the both
sides current of water which improve wash-performance by rubbing clothes strongly.
+
3"
24
26
27
HOW TO USE THE BLEACH AND THE SOFTNER......................... 28
Innovated
washing wings
Three small
BASIC OF SELECTING EACH BUTTON
MAINTENANCE
.........................................
................................................................................
29
30
TROUBLE-SHOOTING GUIDE......................................................... 31
SPECIFICATIONS
............................................................................
washing wings generate strong and
sharp washing currents to clean laundry uniformly.
Adjusted vertical movement and rotating direction
of the washing punch reduces laundry entanglement
and improves washing power.
33
Device for
removing naps
Lint filter catches naps and thread generated
washing to make the laundry cleaner.
2P/No.3828FA3848U
during
3
P/No.3828FA3848U
IMPORTANT SAFETY PRECAUTION
Never touch the clothes in the bowl during
operation or until the bowl stops rotating.
Even when
around
rotating slowly,
your fingers, which
the clothes may wrap
is dangerous.
Don't
put hand(s) under the washer during
operation.
Rotating parts
may
injure
your
hand(s).
The
the
The washer may be deformed
out.
fire(a heater,
Don't put kerosene, gasoline, benzine,
thinner or clothes containing these chemicals into the washer.
explosion might
After
fire may break
result.
To
Don't bend the lid
objects
on or
apply pres-
forcibly,
as
it may break.
Don't install the washer where it would be
to direct sunlight.
exposed
Plastic
parts and the painted cabinet may be
of time.
Switch and/or
panel damage
or a
malfunction may
spin-dry
starched clothes.
spined by mistake, operate the washer without
load with only half the normal amount of detergent.
Otherwise, starch adhering
Don't use excessively
(above 70°C)
Plastic
hot water.
parts of the washer may be deformed
or
damaged.
If
tap.
Don't press the switches and/or the panel
with a sharp object, i.e mechanical pencil.
result.
Don't
Turn the POWER button "OFF" at the wall power
outlet, if you will not be using the machine for a
long period
Don't rest heavy
to the lid.
sure
deformed and/or fade.
washing
Close the water
or a
is not intended for use by
or infirm persons without
supervision.
Young children should be supervised
to ensure that they do not play with the
appliance.
An
Keep washer away from
burning cigarette, etc.).
appliance
young children
Don't
use
The rubber
strong alkaline detergents.
parts may be damaged.
to the bowl may soil
other clothes.
prevent water leakage, fire, electric shocks,
etc.
OFF
OFF
OFF
4P/No.3828FA3848U
5
P/No.3828FA3848U
PARTS NAME
INSTALLATION
START/PAUSE
HOT WATER SUPPLY
BUTTON
HOSE
Use to start
washing
porarily.
or
How to install the drain hose
1. Fit the machine end of the drain hose to the outlet of the drain
stop the
pump and
machine tem-
clamp.
COLD WATER SUPPLY
HOSE
Make
FUNCTION SELECTOR
Holder
sure
the water
Within 50mm
does not leak.
Push
Powder
for
the
tighten
detergent box
delayed washing/
softener box
LINT FILTER
Hose
Clean
regularly to stop
Guide
linting
on
2. Put the other end of the drain hose
Drain Hose
Holes
For Holder
the clothes
3. Fit the
the
standpipe
or
holder into either holes for the holder at the
rear
to fit at either direction
possible
according to location of the standpipe. Make sure that the
holder keeps firmly the drain hose so that the drain hose
should not fall down as shown in the fig.
1m
INLET HOLE FOR
BLEACH
plastic
of the machine. The holder is
0.9~
load.
over
wash tub.
DRAIN HOSE
Check if the drain hose
Holes for the Holder
is located in the
WASHING WINGS
tub before
Vertical movement of
washing
washing punch can be
operated when a sufficient
amount of laundry is
deposited.
To
machine.
If the supply cord is
damaged, it must be
replaced by the manufacture
or
laundry.
its service
agents
similarly qualified
or
person
hazard.
a
washing
not extend
from the end of the hose
discharge height
should be
guide.
approximately 0.9~1m
Your machine
requires
a
floor
drainage slope (or hole)
that will SAFELY DISPOSE of the FULL FLOW of
any water that may leak out the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in an area with a
drain hole
(or slope)
that will
prevent any possibility of
water
damage
to floor
coverings
or
property.
Connect inlet hose
machine for correct balance
BASE
spin operation.
Check that
sealing
washers
are
firmly
MACHINE END
seated.
Attach the curved end of the hose to the inlet valve of the
washing machine; Tighten the coupling nuts securely by
(Fig. 1)
Attach the straight end of the hose to the tap.
Tighten the coupling nuts securely by hand. (Fig. 2)
Accessories
Either hose
Inlet hose
Drain hose
be attached to hot inlet valve and
hand.
tap.
taps and check for leaks. Tighten the coupling nuts
firmly if there is any leakage. If water pressure is strong, close
the water tap completely then open it slightly.
Turn
Height adjustment
plate
mm
Flooding drainage
LEVELLING LEGS
&
than 50
POWER PLUG
in order to avoid
Use to level the
prevent syphoning, the drain hose should
more
from the floor.
water may increase
of
NOTE:
The
Set the proper water level,
an excessive amount of
entanglement
laundry
operating the
on
can
TAP
SEALING
WASHER
SEALING
WASHER
TAP
END
INLET
VALVE
the
Do not install the washer where it is
CAUTION
TWIST
INLET
HOSE
(Fig. 1)
directly exposed to sunlight, wind,
(Fig. 2)
rain etc.
Plug the power cord of this washer into a properly installed standard power
Permissible water temperature : Max 70°C(160°F)
point that
is switched & earthed.
Permissible water pressure : Max 116psi (800kpa, 8kg/cm2), Min 4psi (30kpa, 0.3kg/cm2)
If water temperature & pressure is greater than above, it may cause damage to the machine. If you have
uncontrolled water temperature & pressure you should fit a temperature & pressure relief valve to ensure
1 Each for cold and
2 Pieces
6P/No.3828FA3848U
hot water
that water
temperature & water pressure remains within the safe limits. Consult a plumber or electrician if
you are unable to adjust water temperature and pressure.
Do not over tighten the coupling nuts with a tool. Inlets are plastic : Do not strip or crossthread.
7
P/No.3828FA3848U
INSTALLATION
Improper installation of the washer may cause noise and malfunctioning.
1. The ventilating openings in the base area must not be obstructed by carpeting
washing machine is installed on a carpeted floor.
2. Install the washing machine on a level and firm surface.
How to
adjust level
1
Installation
Install the washer
on
when the
area
2 Checking
flat and firm surface.
Open
the
level
3 Checking slope
lid, and check it the washer is correctly
by looking down from the top.
Adjust the drop of the level indicator to
Check if installation surface is tilted.
leveled
4
Horizontal
setting
5 Confirming
(Try to shake
ly installed.)
the red circle.
level
the washer and check if the washer is firm-
Distance between drain hose and
the wall
More than 10cm
More than 2cm
Adjustable leg
More than 2cm
Lift up the front of the washer and
the level indicator to the center by
adjustable legs
clockwise
or
adjust the drop of
turning the
using the adjusting plate.
Place the washer to
Distance between drain hose and the wall should be
level
than 10cm, and the distance between the other
the wall should be more than 2 cm.
as
in the
firm the
level.)
original position and confirm the
figure. (Try to shake the washer and con-
more
part and
Check the location of the level in the front of washer.
Horizontal
setting
CAUTION
If the
core
Location of
(Example)
Cause
To
drop
move
plate,
How to
adjust
to
When the front is lower.
Adjust the front adjusting plate
or adjust the adjustable legs.
with the
adjustable legs(2),
When the
Adjust the rear adjusting plate
or adjust the supporting plate.
with the
adjustable legs(2),
rear
is lower.
When the left is lower
Adjust the left part of
the supporting plate.
When the
Adjust the right part of
the supporting plate.
the
drop
and turn the
8P/No.3828FA3848U
right
is lower.
of the level indicator
adjustable legs
by
15
mm:
Use two
the front and
the front and
adjusting plates
adjusting plates
rear
rear
and
a
mm
Use the
use
the
is
supplied
splashing
or
or
from
electrical
ingress
a
cord extension set
portable
or
electrical
outlet device should be
portable outlet device the
positioned so it is not subject
of moisture.
adjusting plates
adjusting plates
to level the washer when the
adjustable legs
cannot cover the gap.
or
adjusting plates
10
How to
appliance
extension set
or
supporting
2-3 times.
9
P/No.3828FA3848U
AUTOMATIC AND MANUAL PROGRAMMING
Full automatic control
The NORMAL program is used for average
Manual control
day
Close the lid and press START/PAUSE button.
lights will scroll up and down while
to
day washing.
The water level
Press POWER ON button.
the washer is
Load clothes.
for your clothes load.
Add
detergent,
bleach and conditioner
as
working
out the
optimum
Other programmes are selected
Press POWER ON button.
as
follows.
Load clothes.
water level
Add
desired.
detergent,
Select
bleach and conditioner
desired.
as
temperature, level, process, program and options
as
described below.
Close the lid and press START/PAUSE button.
Preparation before wash
?
Sort your
washing
Each load of
washing
washing
into
separate wash loads
should contain
conditions. For
which needs the
clothing
same
you should not wash delicate
work clothes.
example,
clothes with very dirty
Some fabrics are lint collectors and
from other
fabrics, which
are
lint
Wash process display
Detergent deposit display
Upon loading laundry,
it displays the correct
amount of detergent to
be added according to
Indicates the current
?
washing
Next
?
How to select
?
status.
step is lit,
Use it to select
washing
current
?
?
pro-
?
By pressing
[NORMAL
WOOL].
the button, it cycles
HEAVY
SPEEDY
pick up lint, dirt and colour
producers. Some examples are list-
LINT COLLECTORS
LINT PRODUCERS
Towels
Permanent press fabrics
Chenille / Candlewick
Make
sure
Use it turn
and turn off.
on
By pressing the button [turn
on turn off] are repeated.
Electric power automatically
'
supply : IE lamp blinks.
drainage : OE lamp blinks.
Abnormal spin : UE lamp blinks.
Abnormal water level sensing : PE lamp blinks.
Abnormal lid open : DE lamp blinks.
Abnormal over flooding sensing : OF lamp blinks.
?
Abnormal
turns off 10 seconds after the
washing cycle
finishes with
"boo-" sound.
Nappies
that you wash lint collectors
separately from
lint
producers.
WATER
?
DETERGENTT
EX
HOUR
WARM
?LMS
WATER
TEMP.
GENTLE
laundry
Be
sure
to remove
keys, pins
laundry.
water.
as
things
SOAK
60
1
START
3
WATER
LEVEL
is washable in
MINUTE
DELAY / TIME LEFT
HOT COLD
Check if
?
Abnormal water
ed below.
Corduroy
Synthetics
Used to indicate the time left of all processes or reservation.
In case of abnormal operation, the following indications are
displayed.
dry(based on concentrated detergent).
can
Power switch
Display
grams.
step blinks and finished
step is turned off.
the amount of laun-
washing program
a
PAUSE
15
57
10
5
(MIN)
How to
DELAY
START
adjust
wash conditions
?Wash:
(MIN)
12345
such
AUTO OFF
21
Use it to change washing time.
By pressing the button[21min
(TIMES)
and coins from the
5min
SOAK 10min
SOAK 21min
OFF
SOAK
SOAK 15min
5min
10min
15min]
How to
How to select temp.
Wash
oily
arately.
or
dyed laundry
sep-
Shake loose dirt off before
?
washing.
Used to select proper water temperature of wash-
Child Lock
?
?
fluffy laundry by turning
it inside out.
10
P/No.3828FA3848U
Wash delicate
ping
them in
a
clothes, wrap-
nylon
net.
(When
or
cold
hot water
only is selected, hot water
is suppled for washing
and cold water
are
plied for rinsing)
sup-
unlock the
prevent
setting from being
changed by a child.
For locking, push both
buttons simultaneously
and for unlocking, push
them
ing
one more
the water level
adjust
By pressing the button, it cycles
[LARGE LARGE EX-LARGE
?
EX-LARGE
all the
?
Use it to select hot
water.
Wash
repeats.
or
control buttons to
ing water, [WARM(HOT+
COLD) HOT COLD]
mode
Used to lock
How to
?
SMALL
?
MEDIUM
?
in wash-
process.
?
SMALL
MEDIUM
MEDIUM
LARGE
LARGE].
?
At NORMAL, HEAVY or SOAK
program, water level is automati-
cally based
laundry.
on
Water level
can
adjusted ever
operation.
dirt
more
remove
old
or
Use this function for
Soak time is about 60 minutes.
Use it to set the
not
delayed washing.
delay time.
?Bypressingthebutton,itcycles[3 4 5
... 11 12 14 16 ... 46 48 3]
hours. (up to 48 hours can be delayed)
To cancel delay time, turn the power switch off.
?
Start and temporary pause
?
?
Use it to start
Pressing
or pause temporarily.
the button repeats start and
pause.
After 10 minutes in
power will
temporary
?
change
Rinse
hardened
effectively.
?
?
be
SOAK is used to
delayed washing
?
the amount of
when the washer is in
use
in WOOL
(You
can-
program.)
:
Use it to
change the frequency of rinse.
By pressing the button.
[rinse1 rinse2 rinse3 rinse4
rinse 5
OFF
rinse 1] are repeated.
When you select rinse only, the operation
starts with water supply.
?Spin:
Use it to
a
temporary pause state, the
automatically turn
off.
change the spinning time.
By pressing the button [5 min 7 min
OFF 1min 3min 5min].
11
P/No.3828FA3848U
NORMAL WASH PROGRAM
Use this program for washing normal wash load.
Preset program gives :
1 spray rinse + 1 deep rinse
Warm wash water (cold or hot water
be set
can
optionally...)
WATER
?
DETERGENT
EX
WARM
HOT COLD
HOUR
?L?
GENTLE
M
SOAK
60
1
?S
STAART
357
WATER
TEMP.
MINUTE
DELAY / TIME LEFT
WATER
LEVEL
AUTO OFF
21
PAUUSE
15
10
DELAY
5
(MIN)
START
(MIN)
123
45
(TIMES)
2
In NORMAL and SOAK programs.......
The washer
senses
the amount and kinds of
laundry
and sets the most
appropriate
water
current, wash
1
Press the
1
[POWER SWITCH]
button.
time, number of rinses and spin time by itself.
While
sensing
the most
appropriate
level, each
water
If either the inner-tub contains water
become
Bulky
higher. Manually adjust
and
light laundry
may
or
water level
the
laundry
2
is wet before
proper water level before
cause a
blinks in turn.
lamp
loading, water levels may
operating the washer in this case.
water level lower than usual. In this case,
manually adjust
the water level.
For
laundry
Water
that may
easily
be
discolored, do
supply may be resumed about
adjustment function.
not use
2 minutes after
[SOAK] washing.
starting
the wash. It is
12
3
an
automatic
water level
When
on
the
neutral
using
[instruction
12
P/No.3828FA3848U
detergent
liquid detergent, deposit
detergent].
or
proper amount of
39
detergent
based
6
Deposit laundry
and
push [START/PAUSE]
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
Electric power
"boo--" sound.
automatically
turns off 10 seconds after the
If the lid is not
closed, the machine
cannot start
washing
washing cycle
and it
to
finishes with
displays "DE"
with
alarm sound.
for
13
P/No.3828FA3848U
HEAVY WASH PROGRAM
Use this program for washing
Preset program gives :
2
deep
heavily
soiled durable garments such
as
overalls, jeans
etc.
rinses
Warm wash water
(cold
or
hot water
can
be set
optionally...)
WATER
?
DETERGENT
EX
WARM
HOT COLD
HOUR
?L?
GENTLE
M
SOAK
60
1
?S
STAART
WATER
TEMP.
MINUTE
DELAY / TIME LEFT
WATER
LEVEL
357
AUTO OFF
21
PAUUSE
15
10
DELAY
5
(MIN)
START
(M N)
123
45
(TIMES)
42
All conditions such
as
water
level, wash time and spin time
are
automatically
selected
by
1
1
Press the
[POWER SWITCH]
button.
microcomputer.
2
Select
3
Deposit laundry.
4
Press
59
12
63
14
P/No.3828FA3848U
[HEAVY] program by pressing the program button.
[START/PAUSE]
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
If the lid is not
closed, the machine
cannot start
washing
and it
displays "DE"
to
with
alarm sound.
15
P/No.3828FA3848U
SPEEDY WASH PROGRAM
Use this program for
washing slightly
soiled
laundry.
Preset program gives:
-10 minutes wash
-1 spray rinse + 1
-3 minutes spin
deep
rinse
WATER
-Medium water level
-Warm water
can
be set
(Cold
optionally)
or
?
DETERGENT
EX
hot water
WARM
HOT COLD
HOUR
?L?
GENTLE
M
SOAK
60
1
?S
STAART
3
WATER
TEMP.
MINUTE
DELAY / TIME LEFT
WATER
LEVEL
AUTO OFF
21
PAUUSE
15
57
10
DELAY
5
(MIN)
START
(M N)
123
45
(TIMES)
42
This program is economical because of its short
Adjust water quantity according
Preset water level is medium.
to the amount of
washing
laundry.(less
Press the
1
time.
then
2
Select
3
Deposit laundry.
4
Press
12
3
6
P/No.3828FA3848U
[POWER SWITCH]
button.
3.0kg)
59
16
1
[SPEEDY] program by pressing
[START/PAUSE]
the program button.
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
If the lid is not
closed, the machine
cannot start
washing
and it
displays "DE"
to
with alarm
sound.
17
P/No.3828FA3848U
WOOL WASH PROGRAM
Use this program for
washing
washable
woollens, less than 2.0kg
Preset program gives:
-5 minutes wash
-2
deep
rinses
-1 minutes
WATER
spin
DETERGENT
EX
water level
-Large
?
-Warm water
WARM
HOUR
?L?
HOT COLD
SOAK
GENTLE
M
60
1
?S
STAART
357
WATER
TEMP.
MINUTE
DELAY / TIME LEFT
WATER
LEVEL
AUTO OFF
21
PAUUSE
15
10
DELAY
START
5
(MIN)
(M N)
123
45
(TIMES)
32
How to
Spread
dry wool clothes
wool and WOOL clothes
on a
shady,
flat
In
surface.
case
of
using a clothes hanger, wrap the upper
the hanger with a towel to maintain the
portion of
shape of the
neck
Weak wrinkles after
or
may
setting the water
get damaged.
Only
cold
or warm
level
drying
can
be smoothed out
Wash less than
Do not wash
can
be
Since
easily
spin
for
or
SMALL water levels.
Select
3
Deposit laundry
by ironing.
Laundry
49
12
6
set(Hot water may damage laundry).
button.
[WOOL] program.
Water level is
For
laundry
automatically
with
[LARGE].
and press the
fragile buttons, etc.,
Deposit detergent
If the lid is not
set
[START/PAUSE]
button.
turn them inside out.
and close the lid.
closed, the machine
cannot start
washing
and it
displays "DE"
with alarm
sound.
liquid detergents for woolens or home dry cleaning that are low
in case of powdered detergent it should be dissolved in water
readily
best washing results.
use
of
and dissolve
sudsing
before being put
do not select MEDIUM
[POWER SWITCH]
2
3
water is
It is recommended the
manually,
Press the
1
shoulder section.
CAUTION
When
1
2.0kg
or
of
laundry
altogether with
at a time.
white
clothes, bright-colored clothes
or
dark-colored clothes which
discolored.
is 'weak' for WOOL program, water may
18
P/No.3828FA3848U
drop
even
after
spinning.
19
P/No.3828FA3848U
DELAY START WASHING PROGRAM
This
can
conveniently for the every washing type.(except for WOOL program.)
to cancel delay start for delayed washing, switch the power off and start again.
be used
When you want
WATER
?
DETERGENT
EX
WARM
HOT COLD
HOUR
?L?
SOAK
GENTLE
M
60
1
?S
STAART
357
WATER
TEMP.
MINUTE
DELAY / TIME LEFT
WATER
LEVEL
AUTO OFF
21
PAUUSE
15
10
DELAY
5
(MIN)
START
(M N)
123
45
(TIMES)
42
How to set the
HOUR
you'd like your wash to finish at
set the time as in the figure right.
When you push the button the delay time changes [3
4
12
14
16...
48
3] repeatedly.
Example
:
It's 7
Delay Time
a.m. now.
If
How to put the
For
Put the
detergent
Pull the box and
9 p.m.
14hours:7a.m.
5...
For
powder detergent
detergent
box.
put the detergent then close the box
Put the
detergent
liquid detergent
after
diluting
it with the water at
the rate of 1:1.
2
Put the
bleaching
agent here
3
the
3
Set the Time.
4
Deposit laundry
and press the
Deposit detergent
in the
59
63
deposit detergent in the powder detergent box.
If you leave detergent with the laundry for a long time, the laundry may get partially discolored.
When the lid is opened, delayed washing cannot proceed.
In case of power failure, set again from the beginning.
According to water supply conditions, washing may be unable to be completed by the preset time.
Remove any water from the powder detergent box before depositing detergent.
Moisture may harden the detergent.
After setting delay time, you can change the program, wash time, number of rinses, spin time,
water
sure
to
temperature and
20
P/No.3828FA3848U
button.
Select
12
CAUTION
Make
[POWER SWITCH]
2
1
Dry the moisture in and out of the box before inserting
detergent (the detergent can become hard).
Press the
~9p.m.
detergent into the detergent box
into the exclusive
again.
1
MIN
DELAY / TIME LEFT
1
a
program.
Select program
except for [WOOL] program.
Press the DELAY START button to set the time when the
Pull the
[START/PAUSE]
powder detergent
box forward and
powder detergent
according to instruction of detergent
If the lid is not
delayed washing
deposit
manufacturer.
closed, the machine
completed.
button.
box and must close the lid.
proper amount of
Then, push
cannot start
is
washing
detergent displayed
or
back the box.
and it
displays "DE"
with
alarm sound.
How to wash when you go out
When you cannot take the laundry out
select wash and rinse
only (in
immediately
after
this case, do not select
washing is completed, you'd
spin to prevent wrinkle).
better
water level.
21
P/No.3828FA3848U
SOAK WASH PROGRAM
Use this program for
washing heavily
soiled
laundry
after
soaking.
Preset program gives:
-60 minutes soaking
-1
rinse
deep
-Warm water
(Cold
or
hot water
can
be set
WATER
optionally)
?
DETERGENT
EX
WARM
HOT COLD
HOUR
?L?
GENTLE
M
SOAK
60
1
?S
STAART
WATER
TEMP.
MINUTE
DELAY / TIME LEFT
WATER
LEVEL
357
AUTO OFF
21
PAUUSE
15
10
DELAY
5
(MIN)
START
(MIN)
123
45
(TIMES)
432
1
CAUTION
If either the inner-tub contains water
or the laundry is wet, water level may be different from the inilevel.(It is not malfunction. It is the proper water setting for laundry.)
Bulky and light laundry may cause a water level lower than usual. In this case, manually adjust the
tial set
Press the
2
Select
3
Press the
water level.
For
laundry
that may
easily
be
discolored, do
not use
[SOAK] washing.
1
Ghutra
Soak
a
[POWER SWITCH]
program.
washing
is not available for
[WASH]
washing
21M
59
12
3
6
22
P/No.3828FA3848U
soaking washing.
button until soak and wash blink.
time order
5M
10M
Select rinse times and
4
button.
15M
spin
Deposit laundry
21M
5M
10M
15M
time.
and press
[START/PAUSE]
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
If the lid is not
closed, the machine
cannot start
washing
and it
displays "DE"
to
with alarm
sound.
23
P/No.3828FA3848U
SELECTABLE WASHING METHODS
Use it to select the desired
or
to
repeat
one
cycle among washing, rinse and spin,
washing is completed.
of them after
WATER
?
DETERGENT
EX
WARM
HOUR
?L?
HOT COLD
SOAK
GENTLE
M
60
1
?S
STAART
357
WATER
TEMP.
MINUTE
DELAY / TIME LEFT
WATER
LEVEL
AUTO OFF
21
PAUUSE
15
10
DELAY
START
5
(MIN)
(MIN)
123
45
(TIMES)
1
4
2
1 Press the [POWER SWITCH] button.
2
WASH
Only
WASH & RINSE
START
WASH & SPIN
Only
Press the
Push the wash button to select
?
In this
case
selected wash
?
Adjust
water level for
Preset water level
laundry.
is "Large"
?
Adjust
If the water level is not
automatically
[LARGE].
detergent
&
4
close the lid.
washer
generates the
alarm sound.
24
P/No.3828FA3848U
the
?
?
spin time.
Adjust water level for laundry.
Put laundry and detergent.
?
?
Only
DRAIN
Only
START
START
START
PAUSE
PAUSE
PAUSE
PAUSE
Push the wash button
?
In this
case
Preset water level is
?
?
[START/PAUSE]
?
When
washing
button.
finishs
START
buzzer sound for 10
PAUSE
and then electric power is
automatically off.
secs
Push the
?
?
Adjust the water level
according to the amount
of laundry.
spin
button.
Push the Start/Pause
button with the lid open.
If the water level is not
cally
Push the
Press the SPIN button
to select the time.
selected, it is automati-
"Large"
set to
?
rinses.
selected
wash time is lit up.
Adjust water level for
Press the RINSE button
to select the number of
laundry.
selected,
Ifthelidisnotcom-
pletely closed,
SPIN
Only
START
to select wash time.
according
laundry.
it is
Put
Press the WASH and SPIN but-
the water level
to the amount of
?
3
?
ton to select wash and
Press the RINSE button to select
the number of rinses.
time is lit up.
?
Press the WASH button to select
the time.
wash time.
?
RINSE
Only
button.
PAUSE
PAUSE
?
?
[POWER SWITCH]
RINSE & SPIN
START
START
PAUSE
Only
1
2
3
Close the lid
4
Press the
set to
[LARGE].
[START/PAUSE]
3 Open
the lid
button.
Electric power turns off automatically 10 seconds
after the alarm sounds, when washing completely
START
PAUSE
finishes.
25
P/No.3828FA3848U
WASHING PROCEDURE
Here is the
of
description
washing cycle programmed
Auto-Water
Programmed
Wash Cycles
WATER LEVEL AND AMOUNT OF DETERGENT
Level
Setting
into the
Washing
washing
Rinsing
machine memory.
Spinning
7 min.
EX-LARGE
21 min.
max.
10, 15 min.
NORMAL
SMALL
5 min. min.
DEEP rinse is 3min a time
Deep2
Spray rinse + Deep1
Time
required
(Approx.)
140 min.
~
~
5 min.
63 min.
~
~
1 min.
38 min.
AMOUNT OF DETERGENT
WATER
LEVEL
AMOUNT
OF WATER
EX
94L
80L
?
135 min.
EX-LARGE
21 min.
10,
HEAVY
SMALL
5 min. min.
Deep2
Spray rinse + Deep1
78 min.
~
1 min.
70L
L
~
60L
MEDIUM
SPEEDY
(PROCESS)
10 min.
Spray rinse + Deep1
3 min.
43 min.
55L
M
50L
?
WOOL
LARGE
5 min.
(3
49 min.
1 min.
time)
S
189 min.
DEEP rinse is 3min a time
EX-LARGE
SOAK 60 min.
SOAK
DEEP2
min.a
SMALL
Deep2
Spray rinse + Deep1
1~7min.
~
96 min.
40L
CONCENTRATED
Less than
8.5kg
About
94g
About
80g
Less than
6.5kg
Less than
5.0kg
About
70g
About
60g
About
55g
About
50g
About
40g
38 min.
?
NORMAL
REGULAR
~
7 min.
max.
15 min.
AMOUNT
OF LAUNDRY
Less than
4.0kg
Less than
3.0kg
Less than
2.0kg
Less than
1.0kg
detergent: 20g per 30 liters of water.
Regular synthetic detergent: 30g per 30 liters of water.
When sensing water levels automatically, the amount of water
About
63g
About
54g
About
47g
About
40g
About
37g
About
34g
About
27g
Concentrated
even
For
can
differ
according
to the amount of
laundry
at the same water level.
synthetic detergent,
use one
that
generates less bubbles. This type of detergent is specially designed
for washers.
In
INFORMATION
:
The time
required for each cycle may differ depending on the water pressure. The time shown on the
Table is set under the situation of water supply for approx. 3min.per cycle(20 liters per minute EX-LARGE
water
level).
The indication shown
case
bleach
by
dissolve it with
water(detergent: water=1:1)
and
deposit
it
through
the
Detergent
Use correct amount of
When
is the standard time.
of using liquid detergent,
deposit hole.
washing
detergent according
woollens remember to
to the
use a
detergent manufacturer's instruction.
detergent recommended by Australian Wool
Board
or
New
Zealand Wool Board.
We recommend the
Do not
use
NOTE:
High water pressure may cause noise
if the noise rather annoying.
26
P/No.3828FA3848U
during
the water
supply.
Turn the water
tap
to
adjust water supply
detergent which are low sudsing and dissolve readly to obtain the best wash results.
detergent, which may cause an over sudsing problem and decrease rinsing efficiency.
use
too much
CAUTION
of
If you use laundry soap(natural resin) for a long time, dirt separated from laundry
may remain on the inner-tub wall and cling to laundry during washing.
Using excessive amount of detergent may reduce the rinse effect and pollute the
environment.
27
P/No.3828FA3848U
HOW TO USE THE BLEACH AND THE SOFTNER
BASIC OF SELECTING EACH BUTTON
In addition to full-automatic
How to
In the
the bleach agent
use
Water
of using the bleach, it is necessary to use the oxygenated bleach.
powdered bleaching agent after separating the clothes only for bleaching.
liquid bleaching agent into the bleach inlet.
case
Put the
Put the
For detail usage, refer to the bleach
washing, the user can select other functions
operation, pause the washer before making changes.
washer is in
agent manufacturer's instruction.
the
Even when
only
cold
desired. When the
supply selection
By pressing
Only
as
HOT
COLD
WARM.
button, it cycles WARM(COLD & HOT)
HOT or WARM is selected, water is supplied COLD only during the RINSE cycle.
water is set in the WOOL
or warm
washing.
Water LEVEL selection
Bleach inlet
Water level is set
automatically
button to
the water level.
change
after
sensing
the amount of
laundry
is
high
or
low, press the WATER LEVEL
Wash selection
SOAK
21 min.
Heavily
15 min.
Normal clothes, cotton, yam,
21
10
-
5 min.
5
stained clothes, thick clothes
synthetic fabric, normally-stained clothes,
Soft clothes, delicate clothes,
Actual wash time may differ according to water level.
For WOOL program, washing wings revolve very slowly(to
lightly-stained
thin clothes
clothes
prevent shrinkage and damage).
Rinse selection
Rinse 2~5
Rinse 1
How to
the softener agent
use
Spin
Pull and open the detergent box in the direction of arrow as indicated at picture.
Put the enough agent under the standard line as indicated at the picture.
Put the box
slowly
and
smoothly
not to make the
For detail usage, refer to the softener
Detergent
agent flow
agent manufacturer's instruction.
inlet
7min.
Thick clothes
5min.
Normal clothes,
3min.
Soft clothes
1min. at low revolution
it
can
flow
synthetic fabric, normally-stained clothes,
thin clothes
For WOOL program, the tub turns
very slowly and spins for a very
short time (to prevent damage to
light clothes, thin clothes
clothes).
Clothes to be ironed, delicate clothes
speed
Child Lock Selection
Limited line
If the softener is
stained clothes
Normal clothes, cotton, yam,
selection
over.
Softener cap
Heavily
over
put,
over.
To
guard against
unwanted alteration of
cycle settings during operation
the child lock may be utilised.
HOW TO LOCK
1
Softener inlet
Powder
detergent
Press the POWER
Press the START/PAUSE
2 key
button
after all
ditions
box
are
set
to the manual.
Preset all
which it is to be
matically when
automatically
manually inserted.
yourself at the last
Insert the softener
at the last time of rinse
except
washing
WATER
TEMP.
itself when left with softener because of the
put the bleach and softener directly
can
be failed to be inserted auto-
to the clothes.
of
solidating
(The clothes
days. (It could fail to insert
softener.)
can be damaged of discolored.)
"CJ"
& the
shown
on
HOW TO UNLOCK
If you want to unlock
P/No.3828FA3848U
CJ
START
the water pressure is weak (less than 0.5kgf/cm2).
washing machine with the softener in it more than 2
28
WATER
VEL
for selectable wash for
PAUSE
time of rinse since softener
Do not leave the
by
key and the
key simultaneously while
wash is proceeding, then all the keys are
locked until completing the wash program
or unlocking them.
AUTO OFF
The softener is to be inserted
Do not
3
Press both the WATER TEMP.
WATER LEVEL
conditions.
CAUTION
softener
washing
according
con-
during
wash press both the water
temp key and the
remaining time are altematively
diplay while they are locked.
the
water level
key simultaneously again
29
P/No.3828FA3848U
MAINTENANCE
Cleaning
If
the filter in the valve
Clean the filter when water
1
TROUBLE-SHOOTING GUIDE
supply
into the tub is bad
Disconnect the power cord.
2
or
the inlet valve is
Pull out the filter from the
clogged
3
inlet valve.
with
a
tooth brush to
dirt.
Replace
symbol appears in the display window, check the following before asking for service.
for the service center or agent in the case of failure or damage except for the following.
abnormal
Request
appliance
impurity.
Use
a
This
get
rid of
is fitted with
machine when it is
it.
safety function that automatically stops the operation
exposed heavy disturbance on the mains.
a
of the
washing
to
SYMPTOM
ITEM TO BE CHECKED
Abnormal faucet
Cleaning
1
the lint filter
Pull out the waste thread collection
net from the tub like the
arrow
2
direc-
Turn inside out to
get
rid of filth.
3
tion below.
Insert it to the
original
location.
Is the faucet
Is the faucet frozen?
closed?
Is water
supply
discontinued?
Is the water preslowered or
cold water hose is connected to
the filter
the cold
sure
clogged?
Is hot water selected when
cold
Abnormal
Clean the pump
1
Unfasten 2
screws
cover.
2
Turn the cap to the
and unfasten it.
Remove
arrow
foreign objects
direction
such
as
3
pin,
Reassemble the cap to the
direction and fasten it.
arrow
Abnormal
Check it
over
if water leaks after
When there is a fear of
1 Close the water
2 Hold the water
taps and
supply
remove
hoses
as
freezing
the water
shown in
supply hoses.
the drawing so that
does not sag.
4 Press START/PAUSE button and
warm.
operate the washing machine
for 20 seconds.
5
6
is in the
supply is removed.
Press START/PAUSE button to stop the operation.
Lower the drain hose and select manual spin mode.
7 Press START/PAUSE button and
power
has gone off.
hose is not twisted
or
kinked?
Is the drain hose
Check whether the
hung properly?
drain pump is locked
by foreign objects.
spin
If Frozen
supply hose,
and immerse it in hot water at
approx. 40°C.
2 Pour approx. 2 liters of hot water at approx.
and let it stand for 10 minutes.
40°C, into the bowl
3 Connect the water
tap, and confirm
that the
Water which remains in the water
Check that the drain
cap)
1 Remove the water
it
Check if electric
(Bottom view)
reassembling.(Rubber ring
3 Set the POWER button to "ON" and the WATER TEMP. to
?
select
drainage
etc.
(Bottom view)
:
valve?(In this case,
water.)
casing (when drainage is bad)
of the back
button, coin;
CAUTION
only a
washing
supply
machine
hose to the water
performs
the
Is the
supply
and
drainage
laundry gathered
to one side?
Is the washer tilted?
of
water.
Opened
lid
operate for
30 seconds.
Set the POWER button to "OFF".
?
Drain the water in the bowl and the drain hose.
CAUTION
Do not pour water directly on the cabinet.
Do not wipe the cabinet with benzine, thinner,
Do not rub the cabinet with
When you
30
P/No.3828FA3848U
use a
chemical
a
scrubbing
cleanser, alkaline detergent
brush.
or wax.
(At this time, buzzer sounds
without lamp indication)
Is the lid closed? If the lid is open, alarm
generated and rinse and spin cannot
is
be
proceeded.
Is the lid closed after setting delayed
washing? If the lid is opened, delayed
washing cannot be proceeded.
dustcloth, follow the instructions.
31
P/No.3828FA3848U
SPECIFICATION
TROUBLE-SHOOTING GUIDE
Inlet water pressure
max
800 KPa
min 30 KPa
SYMPTOM
Abnormal
(115 psi)
(4 psi)
ITEM TO BE CHECKED
sensor
M90-12m Standpie inmuhegtofaps clrhetofmain
Abnormal power
1029m
Ask for service center
Abnormal overflood
Abnormal Ball
sensor
1 50m
alowingfor adjustblef
No power
AUTO OFF
Electricity supply
Is the power switch
No
Is the power plug
firmly connected?
pressed?
operation
688mm
Is power supply correct?
Is the short-circuit breaker
240V
50 Hz sinusoidal
632mm
closed?
START
PAUSE
Model
WF-T851
Type
Is the lid closed and the
Is the tub filled with
START/PAUSE button
required
is
Is the faucet closed?
amount of water?
pressed?
noise
8.5
Washing capacity
Electrical
Excessive vibration and
See the
ratings
(EX-LARGE
water
level)
Standard amount of water used
(NORMAL cycle)
Is the washer installed
supply and rinse after
pausing it during spining.
32
P/No.3828FA3848U
rating plate
kg
attached to the
rear
of the washer
Standard amount of water
during spin
Water
automatic washer
Fully
on
firm and level surface?
It is
normal, the washer is automatically correcting the laundry gathered
No
special
action is needed.
to one side.
Approx. 94L
Approx. 190L
Washing system
Automatic
Water
30-800kPa(0.3-8kgf/cm2)
tap pressure
Outer dimension
Weight
reverse
pulsator type
632×688×1029(W×D×H)mm
47kg
33
P/No.3828FA3848U
Download PDF

advertising