LG | WF-T853A | LG WF-T853A Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T853A
Please read this manual
washing
carefully
before
operating your
machine and retain it for future reference.
FEATURES
.........................................................................................
SAFETY INFORMATION
....................................................................
4
5
MACHINE PARTS............................................................................... 6
INSTALLATION................................................................................... 7
AUTOMATIC AND MANUAL PROGRAMMING.................................10
NORMAL, JEAN WASH PROGRAM
.................................................12
SPEEDY, DELICATE WASH PROGRAM
.........................................
WOOL, SOAK, FAVOURITE WASH PROGRAM
DELAY START WASHING PROGRAM
SELECTABLE WASHING METHODS
WASHING PROCEDURE
.............................
............................................
..............................................
.................................................................
WATER LEVEL AND AMOUNT OF DETERGENT
...........................
HOW TO USE THE BLEACH AND THE SOFTENER
SELECTING EACH BUTTON
MAINTENANCE
......................
...........................................................
................................................................................
14
16
18
20
22
23
24
25
26
TROUBLE-SHOOTING GUIDE......................................................... 28
SPECIFICATIONS
............................................................................
30
WARRANTY CARD........................................................................... 31
3
P/No.3828EA3020W
FEATURES
operate while the lid is open. If the lid is opened
wash, rinse and spin cycles, the operation stops for safety.
"Turbo Drum" washer does not
during
the
Fuzzy logic control
A load sensor & a micro processor in
the controller detect laundry load and
set optimum washing conditions such
as water level, wash time etc.
SENSING
START
SETTING
Laundry Sensor
Optimum
Washing
Water Level Sensor
WASHING
Condition
AUTO
POWER
OFF
The most advanced technology in
electronic control system provides the
best washing performance.
Tubo drum
washing
The "punch + 3" washing wings and the washing tub turn
in opposite directions. This makes the water current flow
in two directions which improve.
The wash performance is also improved by the water
which continually cascades into the wash bowl from small
waterfalls in the washing tub.
3
step washing
3
step washing produces the best washing performance with low tangling.
Rubbing
Shaking
Rubbing
Innovated
and
washing wings
Three small
washing wings generate strong and
sharp washing currents to clean laundry uniformly.
Adjusted vertical movement and rotating direction of
the washing punch reduces laundry entanglement
and improves washing power.
Device for
removing
lint
Lint filters catch lint and thread generated
during washing to make the laundry cleaner.
4
P/No.3828EA3020W
and
Shaking
Disentangling
WARNING!
Read and follow this
safety information carefully.
safety, the information in this manual must be followed to minimize the risk of fire
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
For your
or
Save these instructions.
WATER HEATER
SAFETY
Under certain conditions
hydrogen gas may be produced in a water heater that has not
Hydrogen gas can explosive under these circumstances.
If the hot water has not been used for two weeks or mare, prevent the possibility of damage
or injury by turning on all hot water faucets and allowing them to run for several minutes.
Do this before using any electrical appliance which is connected to the hot water system.
This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is
flammable, do not smoke or use an open flame or appliance during this process.
been used for two weeks
PROPER
Install
INSTALLATION
the weather.
or more.
store where it will not be
or
Properly ground
exposed
washer to conform with all
to
temperatures below freezing
governing
or
exposed
to
codes and ordinances. Follow details
in Installation Instructions.
YOUR
LAUNDRY
AREA
Keep
as
the
area
underneath and around your
lint, paper, rags, chemicals,
Close
appliances
free of combustible materials such
etc.
supervision is necessary if this appliance is used by or
play on, with, or inside this or any other appliance.
near
children. Do not allow
children to
Keep
washer away from fire.
WHEN USING
Use this
THE WASHER
Never reach into washer while it is
before
appliance only
opening
for its intended purpose as described in this Owner's Manual.
moving. Wait until the machine has completely stopped
the lid.
Do not mix chlorine bleach with ammonia
Mixing
different chemicals
Do not wash
or
acids such
as
vinegar
and/or rust
remover.
toxic gas which may cause death.
articles that have been cleaned in, washed in, soaked
can
produce
a
in, or spotted
explosive substances (such as wax, oil, paint, gasoline, dry-cleaning
solvents, kerosene, etc.) which may ignite or expolde. Do not add these substances to the
wash water. Do not use or place these substances around your washer or dryer during
operation.
The laundry process can reduce the flame retardancy of fabrics. To avoid such a result,
carefully follow the garment manufacturer's wash and care instructions.
To minimize the possibility of electric shock, unplug this appliance from the power supply or
disconnect the washer at the household distribution panel by removing the fuse or swiching
off the circuit breaker before attempting any maintenance or cleaning.
NOTE: Pressing Power button to turn off does NOT disconnect the appliance from the
power supply.
Never attempt to operate this appliance if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts, including a damaged cord or plug.
or
with combustible
WHEN NOT IN
USE
dry
or
Turn off water
break
or
taps to relieve pressure on hoses and valves and to minimize leakage if a
rupture should occur. Check the condition of the fill hoses; they may need
replacement after 5 years.
Before discarding a washer, or removing it from service, remove the washer lid to prevent
children from hiding inside.
Do not attempt to repair or replace any part of this appliance unless specifically
recommended in this Owner's Manual, or in published user-repair instructions that you
understand and have the skills to carry out.
Do not tamper with controls.
5
P/No.3828EA3020W
MACHINE PARTS
Soap dispenser
box for delayed
washing/ softener
HOT WATER SUPPLY
HOSE
box
COLD WATER SUPPLY
HOSE
INLET HOLE FOR
Make
BLEACH
does not leak.
sure
the water
LINT FILTER
FUNCTION SELECTOR
Clean
regularly
linting
on
to
stop
the clothes
load.
START/PAUSE
BUTTON
Use to start
washing
porarily.
or
stop the
machine tem-
DRAIN HOSE
Check if the drain hose
is located in the
WASHING WINGS
tub before
Vertical movement of
washing
washing punch can be
operated when a sufficient
amount of laundry is
deposited.
If the supply cord is
damaged, it must be
replaced by the manufacturer
water may increase
of
machine.
POWER PLUG
Set the proper water level,
an excessive amount of
entanglement
laundry
operating the
or
laundry.
its service
agents
similarly qualified
in order to avoid
person
hazard.
a
LEVELLING LEGS
Use to level the
washing
machine for correct balance
&
BASE
spin operation.
Accessories
Height adjustment
plate
Inlet hose
1 Each for cold and
2 Pieces
6
P/No.3828EA3020W
hot water
or
Drain hose
INSTALLATION
How to install the drain hose
1. Fit the machine end of the drain hose to the outlet of the drain
pump and
tighten
the
clamp.
Holder
Within 50mm
Push
Drain Hose
Hose
2. Put the other end of the drain hose
Holes
Guide
For Holder
3. Fit the
plastic
over
the
standpipe
wash tub.
or
holder into the holes located at either side of the
of the machine. The holder will fit in either direction
0.9~
rear
1.2m
according
to location of the
standpipe. Make sure that the holder
firmly so that the drain hose does not hang
the fig.
holds the drain hose
down
Holes for the Holder
as
shown in
NOTE:
To
prevent syphoning, the drain hose should
more
The
than 50
mm
not extend
from the end of the hose
discharge height
should be
guide.
approximately 0.9~1.2m
from the floor.
Flooding drainage
Your machine
requires
a
floor
drainage slope (or hole)
that will SAFELY DISPOSE of the FULL FLOW of
any water that may leak out should the machine in the event of a malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in an area with a
drain hole
(or slope)
that will
prevent any possibility of
water
damage
Connect inlet hose
Check that
sealing washers
are
firmly
property.
SEALING
WASHER
washing machine;
TWIST
the
Either hose
TAP
END
INLET
VALVE
be attached to hot inlet valve and tap.
taps and check for leaks. Tighten the coupling nuts firmly if there
is any leakage. If water pressure is strong, close the water tap completely
on
or
TAP
SEALING
WASHER
seated.
coupling nuts securely by hand. (Fig. 1)
Attach the straight end of the hose to the tap.
Tighten the coupling nuts securely by hand. (Fig. 2)
Turn
coverings
MACHINE END
Attach the curved end of the hose to the inlet valve of the
Tighten
to floor
can
INLET
HOSE
the
then open it
(Fig. 1)
slightly.
Do not install the washer where it is
CAUTION
directly exposed to sunlight, wind,
(Fig. 2)
rain etc.
Plug the
power cord of this washer into a properly installed standard power
Permissible water temperature : Max 70°C(160°F)
point that
is switched & earthed.
Permissible water pressure : Max 116psi (800kpa, 8kg/cm2), Min 4psi (30kpa, 0.3kg/cm2)
If water temperature & pressure is greater than above, it may cause damage to the machine. If you have
uncontrolled water temperature & pressure you should fit a temperature & pressure relief valve to ensure that
water
temperature
& water pressure remains within the safe limits. Consult
Do
adjust water temperature and pressure.
not over tighten the coupling nuts with a tool. Inlets
a
plumber or electrician
if you
are
unable to
are
plastic
:
Do not
strip
or
crossthread.
7
P/No.3828EA3020W
INSTALLATION
Improper
installation of the washer may
1. The
cause
noise and
in the base
ventilating openings
on a carpeted floor.
Install the washing machine on
area
malfunctioning.
must not be obstructed
by carpeting
when the
washing
machine is
installed
CAUTION
2.
a
level and
1Installation
firm surface.
area
Install the washer
How to
on
flat and firm surface.
adjust level
4
Horizontal
setting
Adjustable leg
Turn the
adjustable legs
horizontal(2EA).
to set the washer
If the washer is installed
CAUTION
spin
Lift up the front of the washer and
the level indicator to the center by
failure
or
adjustable legs
on a
SPIN Er."
can
uneven,weak
happen
or
clockwise
or
adjust the drop of
turning the
using the adjusting plate.
tilted floor
to it. It must be
causing excessive vibration,
placed on a firm and level floor
prevent spin failure.
Horizontal
Location of
setting
Cause
drop
When the front is lower.
When the
rear
is lower.
When the left is lower
When the
(Example)
To
move
plate,
the
right
is lower.
How to
8
P/No.3828EA3020W
adjustable legs(2),
Adjust the rear adjusting plate with the adjustable legs(2),
or adjust the supporting plate.
Adjust the left part of the front and rear adjusting plates or
the supporting plate.
Adjust the right part of the front and rear adjusting plates
or the supporting plate.
drop of the level indicator by 1.5
adjustable legs 2-3 times.
and turn the
adjust
Adjust the front adjusting plate with the
or adjust the adjustable legs.
mm:
Use two
adjusting plates
and
a
10
mm
supporting
to
2
Checking
Open
the
leveled
level
lid, and check if the washer is correctly
down from the top.
confirming
Checking slope
Check if installation surface is tilted.
(Try to shake the
firmly installed.)
by looking
Adjust the drop
5
3
washer and check if the washer is
of the level indicator to the red circle.
level
Place the washer to
6
Distance between drain hose and the wall
More than 10cm
original
position and confirm the level
as in figure 2.
(Try to shake the washer and
confirm the level.)
More than 2cm
More than 2cm
Check the location of the
level in the front of washer.
Distance between drain hose and the wall should be
more
part
than 10cm, and the distance between the other
the rear part and the wall should be more
or
than 2
CAUTION
If the
core
to
How to
Use the
legs
use
the
appliance
is
supplied
extension set
splashing
or
or
from
electrical
ingress
a
cm.
cord extension set
portable
or
electrical
outlet device should be
portable outlet device the
positioned so it is not subject
of moisture.
adjusting plates
adjusting plates
to level the washer when the
adjustable
cannot cover the gap.
9
P/No.3828EA3020W
AUTOMATIC AND MANUAL PROGRAMMING
Fully automatic control
The
program is used for average
Fuzzy
washing.
day
to
Close the lid and press START/PAUSE button.
lights will scroll up and down while
day
The water level
Press POWER ON button.
the washer is
Load clothes.
for your clothes load.
Add
detergent,
bleach and softener
as
washing
Each load of
washing
into
which needs the
clothing
same
conditions. For example, you should not wash delicate
clothes with very dirty work clothes.
Some fabrics are lint collectors and can pick up lint, dirt and colour
from other fabrics, which are lint producers. Some examples are
washing
listed below.
LINT PRODUCERS
Corduroy
Synthetics
Towels
Permanent press fabrics
Chenille / Candlewick
sure
water level
Upon loading laundry,
displays the correct
amount of detergent
to be added according
it
to the amount of laun-
dry(based on concendetergent).
trated
WASH POWER
Use it to adjust the
strength of water current.
By pressing the button, it
GN ]
cycles[ S
Strength of the water current can be adjusted at
to any level.
At the
LINT COLLECTORS
Make
optimum
DETERGENT DEPOSIT
DISPLAY
separate wash loads
should contain
out the
desired.
Preparation before wash
Sort your
working
beginning,
[ S ].
it starts
with MED
Nappies
that you wash lint collectors
separately from
lint
producers.
WARM
HOT
COLD
WATER DETERGENT
EX-LARGE
LARGE
LEVEL
MEDIUM
SMALL
Check if
laundry
is washable in
Be
to remove
sure
keys, pins
laundry.
water.
as
things
such
and coins from the
HOW TO USE
DELAYED WASHING
Use this function for
delayed washing.
Use it to set the delay
Wash
oily dyed laundry
separately.
or
time.
washing.
By pressing the button,itcycles[3 4
washing water.
[WARM(Hot and cold
light turn on) HOT
COLD
WARM]
5
mode
...
16
11
...
12
46
3] hours.
(Up to 48 hours can
be delayed).
To cancel delay time,
48
fluffy laundry by turning
it inside out.
10
P/No.3828EA3020W
Used to select proper
temperature of
water
Shake loose dirt off before
14
Wash
HOW TO
SELECT TEMP.
Wash delicate
wrapping
turn the power switch
clothes,
them in
a
nylon
net.
off.
repeats.
Manual control
Other programmes are selected
Press POWER ON button.
as
follows.
Load clothes.
Add
bleach and conditioner
detergent,
as
desired.
Select
temperature, level, process, program and
Close the lid and press START/PAUSE button.
washing
In
status.
case
described below.
of abnormal
operation, the following
displayed.
water supply : INLET Er. lamp blinks.
drainage : DRAIN Er. lamp blinks.
spin : SPIN Er. lamp blinks.
water level sensing :
PE
indications
Next
step is lit, current step blinks
and finished step is turned off.
Abnormal
Abnormal
The
NOTE
as
HOW TO SELECT A
WASHING PROGRAM
DISPLAY ABNORMAL
OPERATION
WASH PROCESS DISPLAY
Indicates the current
options
display panel uses the
following abbreviations :
M(minutes), T(Times) and
M(minutes).
Abnormal
Abnormal
are
Use it to select
washing programs.
By pressing the button, it cycles
[NORMAL DELICATE SPEEDY
JEAN
WOOL
FAVOURITE
NORMAL]
displayed.
Abnormal lid open
:
DOOR Er.
lamp
blinks.
FOR MANUAL WASH,
RINSE AND SPIN
Wash:
SOAK
WASH
SHOWER
RINSE
Use it to change washing time.
By pressing the button [21min
FAVOURITE
SPIN
S TRONG
INLET Er.
DELAY
N ORMAL
G ENTLE
DELICATE
WOOL
SPEEDY
JEAN
DRAIN Er.
DOOR Er.
TIME
LEFT
3min
SPIN Er.
AUSE
6min
18min
HOW TO ADJUST
START AND TEMPORARY PAUSE
Pressing
pause temporarily.
the button repeats start and
or
temporary pause.
After 10 minutes in
a
temporary pause
state, the power will automatically turn off.
CHILD LOCK
Used to lock
tons to
or
unlock the control but-
prevent all the setting from being
changed by a child
For locking, push both buttons simultaneously and for unlocking, push them
once more during the washing process.
3
step works
or
12min
15min
SOAKING is used to
hardened dirt
more
effectively.
Soaking time is about 40, 50, 60minutes
(You cannot choose in WOOL and
DELICATE program.).
Rinse:
Use it to start
:
9min
21min]
old
remove
THE WATER LEVEL
25min
40min 50min 60min OFF
at
large
Spray rinse/Deep
1 is
preset in the
FUZZY wash program.
[Sprayrinse+Deep1 Deep2
Deep3 Deep4 Deep5 Off]
mode
repeats.
Use it to
change
Pressing
the button
the
frequency
are
of rinses.
repeats.
When you select rinse only, the
operation starts with water supply.
Spin:
Use it to change the spinning time.
By pressing the button, [5min 7min
OFF 1min 3min 5min].
and medium water level of NORMAL and JEAN program.
11
P/No.3828EA3020W
Use the Normal program for normal
Jeans, overalls etc.
All conditions such
automatically
as
water
selected
dirty laundry
and Jean program for
level, wash time, rinse and spin time
by microcomputer.
are
All you have to do is press the
START/PAUSE button.
Check to
see
if
everything
Preset program
Spray
rinse
gives
is
ready.
:
rinse
(Normal course)
Deep1
(cold or hot water can be
following table 1.)
+
Warm wash water
...
see
the
set
optionally
Table 1. WASH WATER TEMPERATURE GUIDE
USED FOR
WATER TEMPERATURE
White and colorfast cottons, linens with heavy or normal soil.
Permanent press & synthetics with heavy or oily soil.
Hot
Dark
Warm
or
non-color fast fabrics. White & colored
synthetics.
Permanent press with normal or light soil.
Wool is pre selected with warm only.
Lightly
Cold
soiled fabrics.
Table 2. FILL TEMPERATURE OF EACH CYCLE FOR PROGRAM
For each program, the
washing
machine
automatically
selects
a
suitable fill water
temperature.
FILL TEMPERATURE
PROGRAM
APPENDIX EXPLANATION
WASH
Nomal, Jean,
Speedy, Soak,
Favourite
Fill
HOT
WARM
The wash
WARM
temperature for wash
can
COLD
changed
to suit the
Cold water is used for all rinses to increase energy
saving.
Fill temperature is not able to be
clothes from transformation.
WARM
temperature that is selected is illuminated during the complete cycle
:
be
washing style.
COLD
Delicate, Wool
NOTE
RINSE
the
or
Manually adjust proper water level
Bulky and light laundry may cause
water level lower than usual. In this case,
a
to
the control
If either the inner-tub contains water
before
laundry is wet, water
operating the washer.
on
changed
levels may become
protect
panel.
higher.
manually adjust the
water level.
For
laundry that may easily be discolored, do not use [SOAKING] washing.
supply may be topped up about 2 minutes after starting the wash. It is an automatic water
level adjustment function.
When using soap powder or liquid detergent, deposit proper amount of detergent based on the
[instruction for detergent].
Water
12
P/No.3828EA3020W
1
Press the POWER button.
2
Select the desired program.
in the tub.
3
Put
6
Close the lid.
laundry
FAVOURITE
DELICATE
WOOL
SPEEDY
Press program button to select
either
[NORMAL]
or
[JEAN].
Press the START/PAUSE
4 button.
5
Put amount of
detergent
the wash bowl
as
on
or
in
indicated
the water level
instruction of
display
detergent
manufacturer.
WATER DETERGENT
EX-LARGE
LARGE
MEDIUM
AUSE
SMALL
Electric power is automatically
out after washing program
finishes.
NOTE
: Do not pour
detergent directly
into the wash bowl when
using
DELAY START. Use
dispenser
draw.
13
P/No.3828EA3020W
SPEEDY WASH PROGRAM
Use this program for
washing slightly
soiled
laundry.
This program is economical because of its short
washing time.
of laundry.
1Press
the power button
1Press
the power button
Adjust water quantity according to the amount
Preset program gives: -6 minutes wash
-Spray rinse + Deep1 rinse
-3 minutes spin
-Warm water
(Cold
or
hot water
can
be set
optionally)
DELICATE WASH PROGRAM
Use this program for
Microcomputer
Place
detergent
Preset program
washing
controls the
delicate
strength
laundry
such
as
lingerie,
blouses etc.
of circulation.
in
detergent dispenser.
gives: -10 minutes wash (Gentle wash)
-Deep 2 rinse
-1 minutes spin
-Large water level
-Warm water
NOTE
:
When you wish to
change washing cycles,
select them
manually.
4Press
the START/PAUSE
button.
USE
14
P/No.3828EA3020W
2
PROGRAM
[CYCLE] selector
3
FAVOURITE
DELICATE
WOOL
JEAN
Deposit amount of detergent
indicated
by water
level indicator.
Press the
Set the program selector to
2
Put
laundry
[SPEEDY] by pressing
it.
in the tub.
START/PAUSE, close the lid.
Power goes off
finishes.
3
PROGRAM
automatically after wash
[CYCLE] selector
FAVOURITE
WOOL
SPEEDY
Set the program selector to
pressing it.
5
Put
detergent in the wash bowl as indicated on the water
display or instruction of detergent manufacturer.
level
6
JEAN
[DELICATE] by
Close the lid.
WATER DETERGENT
EX-LARGE
LARGE
MEDIUM
SMALL
Power is
automatically
washing
program finishes.
turned off after
15
P/No.3828EA3020W
WOOL WASH PROGRAM
Use this program for
washing
Do not wash woollens with
a
washable
woollens, less than 2.0kg.
dry cleaning
Do not set water level to medium
label attached.
1Press
the power button
1Press
the power button
1Press
the power button
below.
or
Wash clothes with buttons and accessories inside out.
Preset program
gives:
-5 minutes wash
-Deep
2 rinse
-1 minutes
-Large
spin
water level
-Warm water
NOTE
When you wish to
:
change washing cycles,
select them
manually.
SOAK WASH PROGRAM
Use this program for
washing heavily soiled laundry after soaking.
provides the best washing effect.
this program for washing laundry that may discolor.
This program
Do not
use
Preset program
gives:
-40
or
50
or
60 minutes
soaking
-Warm water
(Cold
or
hot water
can
be set
optionally)
FAVOURITE WASH PROGRAM
Pressing
the favourite button allows you to store your favourite wash
cycle memory and then recall it for use at a
conditions in the normal
later time.
16
P/No.3828EA3020W
2
PROGRAM
[CYCLE] selector
FAVOURITE
3
Deposit detergent
4
DELICATE
JEAN
SPEEDY
Set the program selector to
[WOOL] by pressing it.
Use proper kind of detergent
according to the type of laundry.
Always observe detergent
instructions.
2
[WATER LEVEL] selector
3
PROGRAM
WASH
[CYCLE] selector
SHOWER
RINSE
closing
the lid.
Power goes off automatically
after wash finishes.
4
SPIN
INLET Er.
DELAY
DRAIN Er.
WATER DETERGENT
EX-LARGE
Press the START/PAUSE
button after
DOOR Er.
TIME
LEFT
SPIN Er.
LARGE
MEDIUM
ASH
RINSE
SPIN
SMALL
After
Set the program selector to
[SOAK] by pressing it.
Deposit appropriate detergent
2
Select the
[FAVOURITE]
program.
3
amount.
Select your favourite wash
conditions.
the lid press the
START/PAUSE button.
closing
Power goes off automatically
after wash finishes.
4Press
the START/PAUSE button
to store & start your favourite
Press the WATER TEMP. button to
wash
select wash water
Power turns off
temperature.
Press the WATER LEVEL button to
cycle.
automatically
after wash.
select water level.
DELICATE
SPEEDY
WOOL
JEAN
Press the WASH POWER to select
STRONG
or
GENTLE wash
Press the WASH
button,
option.
the RINSE
button & the SPIN button to select
wash
time,
rinse times &
respectively
spin
time
you want to store.
To recall your favourite
1. Press POWER
2. Select the favourite
pressign
cycle.
on.
cycle by
the PROGRAM.
3. Press the START/PAUSE button.
Then the wash
cycle
starts.
17
P/No.3828EA3020W
DELAY START WASHING PROGRAM
This
can
be used
conveniently for every washing program.(except for DELICATE
delayed washing, switch the power off and start again.
and WOOL
program.)
When you want to cancel
1
Press the power button.
2
Select
a
program.
DELICATE
3
Set the time.
WOOL
Press the DELAY START button
to set the number of hours before
you want the
washing
completed.
How to set the
delay
time
you'd like your wash to finish at 9 p.m. set the time as in the figure below.
push the delay start button, the delay time repeatedly changes the number of hours before
youwantthewashtobecompleted[3 4 5... 12 14 16... 48 3]
Example
It's 7
:
a.m. now.
If
When you
14hours:7a.m.
How to
~9p.m.
put the detergent into the detergent box
For
powder detergent
detergent box.
Pull put the box and put the detergent then
close the box again.
Pour it into the exclusive
For
Pour the
liquid detergent
detergent after diluting it with
2
Bleach inlet
3
1
Dry
the moisture in and out of the box before
the
detergent.(moisture
18
P/No.3828EA3020W
may harden the
inserting
detergent)
the
water at the rate of 1:1 into the Bleach inlet.
to be
4
Insert laundry and press the
START/PAUSE button.
5
Deposit detergent into
dispenser box.
the
Close lid and press
START/PAUSE button two
6
soap
times
again.
AUSE
Insert
Pull the soap dispenser box forward and
deposit displayed amount of detergent on
control panel (or detergent usage of brand)
Then, push back the box.
During depositing powder detergent, you will
and press
START/PAUSE button. The
laundry
washer
senses
laundry
and
the amount of
displays
the water
hear
level.
an
alarm sound. It is not
message, but
lid.
just
If the lid is not
closed, the
machine cannot start
It
If the lid is
an error
washing
reminds you to close the
spinning.
generates the alarm sound.
opened, delayed
proceed.
cannot
CAUTION
Make
sure
deposit detergent in the soap dispenser box.
detergent with the laundry for a long time, the laundry
to
If you leave
When the lid is
In
case
opened, delayed washing
of power
Depending
or
failure,
to water
set
again
cannot
from the
setting delay time,
temperature and
you
can
change
discolored.
proceed.
may be unable to be
Remove any water from the soap dispenser box before
Moisture may harden the detergent.
After
partially
beginning.
supply conditions, washing
water
may become
completed by
the
preset time.
depositing detergent.
the program, wash
time, number of rinses, spin time,
water level.
NOTE:
How to wash when you go out
When you cannot take the laundry out immediately after
and rinse only(In this case, do not select spin to prevent
washing is completed,
wrinkles).
you should select wash
19
P/No.3828EA3020W
SELECTABLE WASHING METHODS
Use it to select the desired
cycle
Press the
power switch.
among
washing,
rinse and
WASHONLY?
?
?
spin,
to
or
When wash
repeat
liquid
one
of them after
RINSE
SPIN
Adjust
is
washing
time.
completed.
is to be used twice.
Press the WASH button to select the
ASH
washing
the water level
according
If the water level is not
to the amount of
laundry.
selected, it is automatically
set to
[LARGE].
WASH&RINSE?
?
?
When it is not desirable to
spin
clothes in order to avoid wrinkles.
Press the WASH button to select the
ASH
RINSE
washing
time.
Press the RINSE button to select the number of rinses.
SPIN
Adjust
the water level
according
If the water level is not
to the amount of
laundry.
selected, it is automatically
set to
[LARGE].
RINSEONLY?
?
?
When it is desirable to rinse clothes which have
already
been washed.
Press the RINSE button to select the number of rinses.
Adjust
the water level
according
If the water level is not
ASH
RINSE
SPIN
[LARGE].
To deposit
to the amount of
laundry.
selected, it is automatically
fabric softener... Refer to
use
set to
of fabric softener.
When Rinse
When
RINSE&SPIN?
?
?
only, amount of laundry will not be sensed.
selecting rinse only, it starts with water supply.
When it is desirable to rinse and
spin
clothes which have
already been washed.
Press the RINSE button to select the number of rinses.
ASH
RINSE
Press the SPIN button to select the
SPIN
Adjust
the water level
according
If the water level is not
spinning
time.
to the amount of
laundry.
selected, it is automatically
set to
[LARGE].
DRAINorSPINONLY?
?
?
When it is desirable to drain water from the bowl
spin
ASH
RINSE
clothes before
drying.
SPIN
Press the SPIN button to select the
WASH&SPIN?
ASH
RINSE
SPIN
?
?
When
heavy soiling
is removed
spinning
prior
time.
to normal
washing
Press the WASH and SPIN button to select the desired
combination.
NOTE: If Rinse is not
remain
20
P/No.3828EA3020W
on
selected, detergent residue may
clothes.
or
Deposit laundry
Press the START/PAUSE
Deposit detergent
button
the lid
and close
AUSE
Deposit detergent
based
on
the
indicated amount.
If
The washer
of
displays the amount
detergent and begins supplying
water.
only [WASH
selected,
it is
For
or
WASH+RINSE]
is
water will not be drained after
completed.
draining, press
the SPIN button and
the START/PAUSE button.
Close the lid
Press the START/PAUSE
button
AUSE
Electric power turns off automatically
10 seconds after the alarm sounds,
when
washing completely finishes.
CAUTION
In
case
of
selecting
RINSE and
SPIN,
RINSE
or
water will be
before
starting RINSE,
by SPIN.
of selecting RINSE only,
supplied
followed
In
case
water will not be drained after
Check
pockets
belongings.
for
If the lid is not
the washer
sound.
completely closed,
generates the alarm
RINSE. To drain water, select
SPIN.
If the water level is not
is
automatically
set to
selected, it
[LARGE].
21
P/No.3828EA3020W
WASHING PROCEDURE
Here is the
of
description
washing cycle programmed
Auto-Water
Programmed
Wash Cycles
Level
into the
Washing
Setting
EX-LARGE
25 min.
SMALL
25 min.
Spinning
7 min.
DEEP rinse is 3min a time
max.
Time
required
(Approx.)
141 min.
~
~
Deep2 5
Spray rinse + Deep1
5 min.
65 min.
~
~
1 min.
33 min.
DEEP rinse is 3min a time
7 min.
141 min.
~
~
Deep3 5
Deep2
Spray rinse + Deep1
5 min.
78 min.
~
3 min. min.
EX-LARGE
machine memory.
Rinsing
21 min.
NORMAL
washing
max.
~
21 min.
JEAN
SMALL
DELICATE
3 min. min.
LARGE
DEEP2
10 min.
(3
min.a
time)
~
~
1 min.
33 min.
1 min.
57 min.
3 min.
42 min.
1 min.
52 min.
NORMAL
(PROCESS)
EX-LARGE
6 min.
SPEEDY
Spray rinse + Deep1
SMALL
WOOL
5 min.
LARGE
DEEP2
(3
40or50or60min.
Deep2 5
Spray rinse + Deep1
~
SMALL
The time
time)
176 min.
DEEP rinse is 3min a time
EX-LARGE
SOAK
INFORMATION
min.a
1~7min.
~
70 min.
:
required
cycle may differ depending on the water pressure. The time shown on the
Table is set under the situation of water supply for approx. 3min.per cycle(20 liters per minute EX-LARGE
water
for each
level).
The indication shown
Spray
by
rinse is carried out rinse
is the standard time.
cycle
in accordance with
filling
water.
NOTE:
High
water pressure may cause noise
if the noise is
annoying.
22
P/No.3828EA3020W
during
the water
supply.
Turn the water
tap
to
adjust water supply
WATER LEVEL AND AMOUNT OF DETERGENT
AMOUNT OF DETERGENT
WATER
LEVEL
AMOUNT
OF WATER
94L
EX-LARGE
80L
70L
LARGE
60L
55L
MEDIUM
50L
40L
SMALL
AMOUNT
OF LAUNDRY
REGULAR
Less than
8.5kg
About
About
80g
About
70g
About
60g
About
55g
About
50g
About
40g
Less than
5.0kg
Less than
4.0kg
Less than
3.0kg
Less than
2.0kg
Less than
1.0kg
About
63g
About
54g
About
47g
About
40g
About
37g
About
34g
About
27g
94g
Less than
6.5kg
CONCENTRATED
Concentrated
detergent: 20g per 30 liters of water.
Regular synthetic detergent: 30g per 30 liters of water.
When sensing water levels automatically, the amount of water can differ according to the volume and
weight of laundry.
For synthetic detergent, use one that generates less bubbles. This type of detergent is specially designed
for washers.
In
case
of
using liquid detergent,
dissolve it with
water(detergent: water=1:1)
and
deposit
it
through
the
bleach inlet hole.
Detergent
Use correct amount of
When
washing
detergent according
woollens remember to
to the
use a
detergent manufacturer's instruction.
detergent recommended by Australian Wool
Board
or
New
Zealand Wool Board.
We recommend the
Do not
use
CAUTION
detergents which are low sudsing and dissolve readly to obtain the best wash results.
detergent, which may cause an over sudsing problem and decrease rinsing efficiency.
use
too much
of
If you use laundry soap(natural resin) and cold water regularly, dirt separated from
laundry may remain on the inner-tub wall and cling to laundry during washing.
Using excessive amount of detergent may reduce the rinse effect and pollute the
environment.
23
P/No.3828EA3020W
HOW TO USE THE BLEACH AND THE SOFTENER
How to
When
use
the bleach agent
using bleach, always
Pour the
make
sure
powdered bleaching agent
only for bleaching.
it is
after
oxygenated
bleach.
separating
the clothes
Pour the
liquid bleaching agent
Bleach inlet
into the
Bleach inlet.
How to
use
the softener agent
the soap dispenser box by pulling in the direction of the arrow, as indicated in the picture.
Fill the soap dispenser box with softener, making sure not to fill over the standard line, as indicated at the
Open
picture.
Push the box closed
The softener will be
slowly and gently so as not to allow the softener
automatically released at the proper time.
to
spill
out.
Softener cap
Detergent
inlet
Max Level
If the softener is
it
Soap dispenser
box
can
flow
over
over.
Softener inlet
CAUTION
Don't
When
detergent. Use softener in last rinse water.
using dispenser, dilute softener(30ml) with fresh water(30ml)
When
filling dispenser,
use
softener with
do not
splash
or
overfill. It may stain clothes.
Never pour fabric softener and bleach
If
spotting
The
occurs, wet and rub hand
rewash.
only liquid fabric softener.
manually (during the last rinse cycle) when water pressure is too weak
than
0.5
as
it
will not be possible for the softener to be released automatically.
(less
kg/cm2)
Do not leave the softener in the dispenser for more than two days.
It is important to clean the dispenser regularly.
dispenser
is
directly on clothes. It may stain them.
dishwashing liquid (or mild bar soap) and
designed
Softener should be added
24
P/No.3828EA3020W
to use
filled,
SELECTING EACH BUTTON
In addition to full-automatic
washing, the user can select other functions as desired.
operation, pause the washer before making changes.
selection
When the washer is in
Water
supply
By pressing
the
Even when
only
button, it cycles WARM(COLD & HOT) HOT COLD WARM.
HOT is selected, COLD water is supplied during the RINSE cycle.
Water LEVEL selection
Water level is set
change
automatically
after
sensing
the amount of
laundry.
Press the WATER LEVEL button to
the water level.
Wash power selection
Heavily-stained
S TRONG
For WOOL program, water current is
clothes
N
ORMAL
Normally-stanied clothes, cotton,
G
ENTLE
Lightly-stained
yam,
synthetic fabric,
thin clothes
clothes
separately adjusted
very gentle one to prevent damage to clothes.
To dissolve detergent, the washer starts operating at
to
a
level which is
one
a
step lower than the preset water level.
Wash selection
SOAKING
40, 50, 60min.
25
18
9
3
-
-
3
Heavily
Actual wash time may differ
stained clothes
25min.
Heavily
15min.
Normal clothes, cotton, yam,
-
6min.
stained clothes, thick clothes
synthetic fabric, normally-stained clothes,
Soft clothes, delicate clothes,
lightly-stained
according
to water level.
For WOOL and DELICATE program,
methods cannot be selected.
thin clothes
soaking
clothes
Rinse selection
Deep2~Deep5
Spray
rinse
+
Deep
Spin
Deep
Heavily
stained clothes
Normal clothes, cotton, yam,
1
1
Lightly-stained
synthetic fabric, normally-stained clothes,
thin clothes
clothes
selection
5
3
1
7min.
Thick clothes
5min.
Normal clothes,
3min.
Soft clothes
~
~
~
1min. at low revolution
light
For WOOL and DELICATE program, the tub turns
very slowly and spins for a very short time
clothes, thin clothes
(to prevent damage to clothes).
Clothes to be ironed, delicate clothes
speed
CHILD LOCK SELECTION
To
guard against
unwanted alteration of
cycle settings during operation,
the child lock may be utilised.
HOW TO LOCK
1Press
the POWER
2
button
Press the START/PAUSE
key
washing conditions are
according to the manual.
after all
set
Preset all
3
Press both the RINSE
key and the
key simultaneously while wash is
proceeding, then all the keys are locked
until completing the wash program or
unlocking them.
SPIN
washing
conditions.
RINSE
SPIN
AUSE
"CJ"
shown
HOW TO UNLOCK
If you want to unlock
during
wash press both the water
temp key and the
& the
on
remaining time are altematively
diplay while they are locked.
the
water level
key simultaneously again
25
P/No.3828EA3020W
MAINTENANCE
CLEAN THE FILTER IN THE VALVE
Clean the filter when water
1Disconnect
the power
2
cord.
supply into the tub appears dirty or the inlet valve is
Turn off water supply and
Pull out the filter from
remove
3
the inlet hose.
clogged
Use
4
the inlet valve.
a
with
impurity.
tooth brush to
rid of dirt.
Replace
get
it.
CLEAN THE LINT FILTER
out the waste thread
1Pull
Turn inside out when
collection net from the tub in the
direction of the
2 submerged
below.
arrow
remove
lint
in water and
a
Do not rub the cabinet with
When you use
instructions.
CLEAN THE PUMP CASING
1
a
towel
on
the
floor under the drain
2
counter-
pump cap. Excess
clockwise and
it out.
pull
Check it
over
26
P/No.3828EA3020W
Remove any foreign
and fluff inside
3 objects
Cap
:
a
chemical
or wax.
a
scrubbing
dustcloth,
brush.
follow the
(when drainage is bad)
Turn the cap
water may flow out.
CAUTION
location.
Do not pour water directly on the cabinet.
Do not wipe the cabinet with benzine, thinner,
panel
soft cloth.
cleanser, alkaline detergent
Place
original
CAUTION
stains from the cabinet
and the control
with
Insert it into the
build-up.
CLEAN THE CABINET
Wipe
3
if water leaks after
Replace the cap. Insert the filter
the guide ribs inside the
pump casing. Filter must face the
guide ribs inside pump casing and
securely turn the cap clockwise.
4 along
pump casing and from
the filter.
Filter
reassembling.(Rubber ring
Guide rib
is in the
cap)
SCRUD
Scrud is the
given to the waxy build-up that can occur within
detergent. This build-up is not brought about by a
name
into contact with
in the machine it can result in stains on your clothes
If you wish to use fabric softener we recommend:
Using the dispenser, do not splash or overfill.
build-up
Clean
dispenser
as soon as
the
cycle
unpleasant
build-up occurring.
intervals e.g. approx. every 5th wash.
Fabric softener of thinner consistency is less likely to leave residue
a
smell in your washer.
has finished.
Clean your machine regularly.
Cold water washing increases the chance of this
wash at
or an
any washer when the fabric softener comes
fault in the machine. If scrud is allowed to
We recommend
a warm or
hot
regular
on
the
dispenser
and contribute to
build-up.
CLEANING THE INSIDE OF YOUR WASHER
If you use fabric softener
inside of your machine.
or
do
regular cold
water
washing,
Fill your machine with hot water. Add about two cups of
Let it rotate for several minutes.
Stop
the
After
soaking,
machine, open the lid. and leave it
drain the machine and
run
a
it is
important
that you
powder detergent
occasionally
that contains
clean the
phosphate.
to soak
overnight.
through a regular cycle.
during this procedure.
the machine
We do not recommend that you wash clothes
WHEN THERE IS A FEAR OF FREEZING
1 Close the water
2 Hold the water
taps and
supply
remove
hoses
as
the water
supply hoses.
drawing so that
shown in the
it
does not sag.
3 Set the POWER button to "ON" and the WATER TEMP. to
4 Press START/PAUSE button and
operate
the
washing
warm.
machine for
20 seconds.
Water which remains in the water
supply is removed.
stop the operation.
select manual spin mode.
5 Press START/PAUSE button to
6 Lower the drain hose and
7 Press START/PAUSE button and
operate for
30 seconds.
Set the POWER button to "OFF".
Drain the water in the bowl and the drain hose.
IF FROZEN
1 Remove the water
supply hose,
and immerse it in
hot water at approx. 40°C.
2 Pour approx. 2 liters of hot water at approx.
into the bowl for 10 minutes.
3 Connect the water
washing
machine
40°C,
supply hose to the water tap, and confirm that
performs the supply and drainage of water.
the
27
P/No.3828EA3020W
TROUBLE
If
a
-
SHOOTING GUIDE
abnormal
symbol appears in the display window, check the
for the service center or agent in the case of failure or
following before asking for service.
damage except for the following.
automatically stops the operation of the washing machine
Request
appliance is fitted with a safety function that
when it is exposed to heavy disturbance on the mains.
This
SYMPTOM
ITEM TO BE CHECKED
Abnormal
water
supply
INLET Er.
Abnormal.
Water
supply.
Is the water
Is the
Is the
tap frozen?
pressure lowered or cold water hose is connected to
the filter clogged?
the cold valve?(In this case, select
tap
Is water
closed?
supply
discontinued?
Abnormal
Is hot water selected when
cold
only
a
water.)
drainage
DRAIN Er.
Check if electric
Check that the
Is the drain hose
Check whether the
power has gone
off.
drain hose is not
hung properly?
drain pump is
locked by foreign
twisted
or
kinked?
objects.
Abnormal
spin
SPIN Er.
Is the
Opened
laundry gathered
to
one
side?
Is the washer tilted?
lid
DOOR Er.
this time, buzzer sounds
without lamp indication)
(At
28
P/No.3828EA3020W
Is the lid closed? If the lid is open, alarm
generated and rinse and spin cannot
is
proceed.
Is the lid closed after setting delayed
washing? If the lid is opened, delayed
washing cannot proceed.
SYMPTOM
ITEM TO BE CHECKED
Others
Ask for service center
No power
Is the power switch
pressed?
Is the power
connected?
plug firmly
Is power supply correct?
Is the short-circuit
breaker closed?
No
operation
Is the lid closed and the
Is the tub filled with
START/PAUSE button
required
pressed?
water?
Is the
tap closed?
amount of
Excessive vibration and
noise
during spin
Is the washer installed
Water
and rinse
It is normal, the washer is
after
it
one
supply
pausing
rinse or spin.
during
No
on
firm and level surface?
automatically correcting
the
laundry gathered
to
side.
special
action is needed.
29
P/No.3828EA3020W
Inlet water pressure
max
800 KPa
min 30 KPa
(115 psi)
(4 psi)
M90-12m Standpie inmuhegtofaps clrhetofmain
1 50m
120 m
915m
Alowingfor adjustblef
Electricity supply
625mm
625mm
Model
WF-T853A
Type
automatic washer
Fully
8.5
Washing capacity
Electrical
See the
ratings
Standard amount of water
(EX-LARGE
water
level)
rating plate
kg
attached to the
rear
of the washer
Approx. 94L
Washing system
Automatic
Water
30-800kPa(0.3-8kgf/cm2)
tap pressure
Outer dimension
Weight
30
P/No.3828EA3020W
240V
50 Hz sinusoidal
reverse
pulsator type
625×625×1007(W×D×H)mm
47kg
GUARANTEE
2 YEARS ON COMPONENTS
10 YEARS STAINLESS
STEEL BOWL
THE LG EXPRESS GUARANTEE
This
specifically covers replacement and repair of any defective componentry
period specified in the LG Guarantee medallion above.
or
faults in manufacture
for the
However, LG accepts
any
reason
beyond
no
liability
where any
goods
fail to
comply
with this express guarantee because of
LG's control.
replaced by LG at no cost to the owner. Similarly all work shop labour costs
goods to their original working condition will be met by LG during the guarantee
This
to
work done in any approved LG Service Centre and specifically excludes travel
period.
applies
if
the
time, freight
product is outside the LG Service Centres normal service area.
Faulty components
will be
needed to restore the
The conditions of this
Express guarantee only apply
if
repairs
are
carried out
by
an
approved
LG
Service Centre in New Zealand.
This guarantee is not transferable except
as
provided by
the
consumer
Guarantee Act 1993.
EXPRESS GUARANTEE SERVICE
LG guarantees the continued supply spare parts for a period after the date of manufacture of not less
than 5 years for electrical components and 3 years for cabinet and other cosmetic components.
If there is any conflict between this LG Express Guarantee and the
Guarantee Act 1993, the provisions of the Act shall apply.
Model No.
:
Date
Serial No.
:
Purchased From
purchased
provisions
of the Consumer
:
:
31
P/No.3828EA3020W
P/No.: 3828EA3020W
Download PDF

advertising