LG | WF-T857 | LG WF-T857 Owner’s Manual

Washing Machine
OWNER'S MANUAL
MODEL : WF-T857
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model name and serial number of the set.
Quote this information to your dealer when you require service.
P
roduct Features
Washer doesn't operate while the lid is open. If the lid is open during the wash, rinse or spin cycles,
the operation stops for safety.
sensors (option)
The sensor automatically detects the quantity of a Detergent put by a user and the
temperature and the quality of water to make the best washing algorithm for
washing and rinsing, which can give the best washing effect.
FUZZY logic control
A built-in load sensor automatically detects the laundry load and a
microprocessor optimizes washing conditions such as ideal WATER
LEVEL and washing time.
START
SENSING SETTING
Laundry Sensor
Water Level Sensor
Optimum
Washing
Condition
WASHING
AUTO
POWER
OFF
Advanced technology is built into the Electronic Control System which
ensures the best washing result.
Turbo drum washing (option)
When "Punch + 3" washing wings turn, the washing
tub turns in the opposite direction. This creates
opposing water currents and results in a more
efficient wash action.
3 Step washing
3 step washing makes the best washing performance with low tangling.
Rubbing
Rubbing and
Shaking
Shaking and
Disentangling
NOTE : Be sure to remove the unit from the carton base, otherwise the
machine will not be able to operate properly.
C
ontents
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you
may not need to call for service at all.
Introduction
Safety Information
Identification of Parts
Function Information
Before Starting to Wash
Preparation Before Washing
Use of Water, Detergent, Bleach and Softener
9
10
Special Guide for Stain Removal
Function of each Button
FUZZY Wash
13
14
16
QUICK WASH
JEAN Wash
WOOL Wash
DELICATE Wash
16
16
16
16
SOAK Wash
FAVORITE Wash
SILENT Wash
NORMAL
18
19
20
21
AIR DRY
Option Washing
22
23
DELAY START (RESERVATION) Wash
Other Useful Functions
Installation
Connecting Water Supply Hose
24
25
26
29
Grounding Method
Cleaning and Maintenance
Common washing problems
Troubleshooting
Terms of Warranty
Specification
32
33
35
36
37
38
Washing Programs
Additional Function
Program
Installation
Care and Maintenance
Troubleshooting
Terms of Warranty
Specification
4
7
8
4
Introduction
S
afety Information
Read carefully and thoroughly through this booklet as it contains important safety information
that will protect the user from unexpected dangers and prevent potential damages to the product.
This booklet is divided into 2 parts : Warning and Caution.
: This is a warning sign specifying user’s applications which might
be dangerous.
: This is a sign specifying ‘Strictly Forbidden’ applications.
Warning : Failure to comply with the instructions under this
sign may result in major physical injuries or death.
Caution : Failure to comply with the instructions under this
sign may result in minor physical injuries or
damages to the product.
WATER
HEATER
SAFETY
PROPER
INSTALLATION
Warning
• Under certain conditions hydrogen gas may be produced in a water heater that has not been
used for two weeks or more. Hydrogen gas can be explosive under these circumstances.
If the HOT water has not been used for two weeks or more, prevent the possibility of
damage or injury by turning on all Hot water faucets and allowing them to run for several
minutes. Do this before using any electrical appliance which is connected to the HOT
water system. This simple procedure will allow any built-up hydrogen gas to escape. Since
the gas is flammable, do not smoke or use an open flame or appliance during this process.
Caution
• The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
• Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
If the product is exposed to such conditions, electric shock, fire, break down or
deformation may occur.
• Properly ground washer to conform with all governing codes and ordinances. Follow details in
Installation Instructions.
If not grounded properly, break down and leakage of electricity may occur, which may
cause electric shock.
• Must be positioned so that the plug is accessible.
If the plug is placed between the wall and the machine, it may get damaged, possibly
causing fire or electric shock.
• Make sure the plug is completely pushed into the outlet.
Failure to do so may cause electric shock and fire due to overheating.
5
S
afety Information
Warning
• Keep the area underneath and around your appliances free of combustible
materials such as lint, paper, rags, chemical, etc.
Operating with such materials around the machine may trigger
explosion or fire.
• Close supervision is necessary if this appliance is used by or near children.
Do not allow children to play on, with, or inside this or any other appliance.
There is potential danger that children might drown in the tub.
Do not touch the power plug with a wet hand.
It will cause electric shock
Do not put your hand, foot or anything under the washing machine
while the washing machine is in operation.
There is a rotating mechanism under the machine, so you could be injured.
WHEN USING
THE WASHER
Caution
• Use this appliance only for its intended purpose as described in this Owner’s Manual.
• The laundry process can reduce the flame retardancy of fabrics. To avoid such a result,
carefully follow the garment manufacturer’s wash and care instructions.
• To minimize the possibility of electric shock, unplug this appliance from the power
supply or disconnect the washer at the household distribution panel by removing the
fuse or switching off the cirduit breaker before attempting any maintenance or cleaning.
NOTE : Pressing Power button to turn off does NOT
disconnect the appliance from the power supply.
• Make sure that drainage is working properly.
If water is not drained properly, your floor may be flooded. Flooded floors
may induce electricity leakage, further resulting in electric shock or fire.
• If, during spinning, opening the lid does not stop the tub within about 15 seconds,
immediately discontinue operating the machine.
Call for repair. A machine that spins with its door open may cause injuries.
Never reach into washer while it is moving.
Wait until the machine has completely stopped before opening the lid.
Even slow rotation can cause injury.
Never attempt to operate this appliance if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts, including a damaged cord or plug.
Operating with a damaged plug may cause electric shock.
Do not use water hotter than 60°C.
Use of excessively hot water may cause damage to fabrics or cause
leakage of water.
Introduction
YOUR
LAUNDRY
AREA
6
Introduction
S
afety Information
WHEN USING
THE WASHER
Warning
Do not use a plug socket and wiring equipment for more than their rated capacity.
Exceeding the limit may lead to electric shock, fire , break down, and/or
deformation of parts.
Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover.
Mixing different chemicals can produce toxic gases which may cause death.
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted
with combustible or explosive substances (such as wax, oil, paint, gasoline, drycleaning solvents, kerosene, etc). Do not add these substances to the wash water.
Do not use or place these substances around your washer or dryer during operation.
It may ignite or explode.
WHEN NOT
IN USE
Caution
• Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage
if a break or rupture should occur. Check the condition of the fill hoses; they may need
replacement after 5years.
• When the air temperature is high and the water temperature is low, condensation may
occur and thus wet the floor.
• Wipe off dirt or dust on the contacts of the power plug.
Using unclean power plug may cause fire.
• Before discarding a washer, or removing it from service, remove the washer lid to
prevent children from hiding inside.
Children may be trapped and suffocated if the lid is left intact.
Do not attempt to repair or replace any part of this appliance unless specifically
recommended in this Owner’s Manual, or in published user-repair instructions
that you understand and have the skills to carry out.
Operating the machine with improperly replaced parts may be a
cause for fire or electric shock.
Do not tamper with controls.
It may lead to electric shock, fire , break down, deformation.
Do not yank the power cord in an attempt to disconnect the power plug.
Securely hold the power plug to unplug the machine.
Failure to observe these instructions may cause electric shock or fire
due to short-circuit .
When you are cleaning the washing machine, do not apply water directly to any
part of the washing machine.
It will cause short circuit and electric shock.
7
I
dentification of Parts
POWDER DETERGENT BOX
FOR DELAYED WASHING /
SOFTENER BOX
WATER SUPPLY
HOSE
Make sure the
water does not
leak.
POWER PLUG
If the supply cord is
damaged, it must be
replaced by the
manufacturer or its
service agents or
similarly qualified
person in order to
avoid a hazard.
BLEACH
DISPENSER
FUNCTION
SELECTOR
LINT FILTER
Clean regularly to
stop linting on the
clothes load.
TUB
START/PAUSE
BUTTON
Use to start or
stop the washing
machine
temporarily.
DRAIN HOSE
Check if the drain
hose is hung up
before operating the
washing machine.
ADJUSTABLE LEGS
Use to level the washing
machine for correct
balance & spin
operation.
BASE
Accessories
Height adjustment
plate
Inlet hose
2 Pieces
1 Each for cold and
hot water
NOTE
“ ” Part can be different according to the model.
Drain hose
Introduction
Body
8
Introduction
F
unction Information
Our machine provides various washing methods which suits various conditions and
types of laundry.
Different types of laundry washing
FUZZY Wash
Use this Program for everyday washing e.g. sheets, towels, T-shirts. (refer to page 16)
JEAN Wash
Use this Program for heavily soiled durable garments e.g. overalls, jeans.
Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed. (refer to page 16)
DELICATE Wash
Use this program to wash DELICATE and washable laundries. (refer to page 16)
WOOL Wash
Delicate clothes (lingerie, wool, etc.) which may be easily damaged can be washed. (refer to page 16)
The fibers of machine washable woolens have been specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
• Before washing your woolens check the care label for the washing instructions.
• When washing woolens use a mild Detergent recommended for washing wool.
• Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
• To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
(The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.)
Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.)
You may wish to handwash these articles and place them in the machine to spin dry.
FAVORITE Wash
This setting allows you to store your FAVORITE wash conditions in the normal cycle memory. (refer to page 19)
SILENT Wash
Use this program to wash quietly at night. (refer to page 20)
NORMAL Wash
Normal is the economical program to minimize water consumption. (refer to page 21)
Washing according to the condition of laundry
QUICK WASH
QUICK WASH can be selected to wash lightly soiled clothes of less than 2.0 kg in a short time. (refer to page 16)
SOAK Wash
SOAK Wash can be selected to wash heavily soiled laundry by soaking in water for some time to remove dirt and
grime. (refer to page 18)
Other washing method
OPTION WASH
When the user needs only SPIN, RINSE/SPIN, RINSE, WASH/RINSE, WASH, WASH/RINSE/SPIN,
SOAK/WASH/RINSE/SPIN. (refer to page 23)
DELAY START Wash
DELAY START Wash is used to delay the finishing time of the operation.
The number of hours to be delayed can be set by the user accordingly. (refer to page 24)
9
reparation Before Washing
Before Starting to Wash
P
Care Labels
* Look for a care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Sort clothes into loads that can be washed with the same wash cycle, Water Temperature and spin speed.
Sorting
To get the best results, different fabrics need to be washed in different ways.
• SOIL (Heavy, Normal, Light)
Separate clothes according to the type and amount of soil.
• COLOR (Whites, Lights, Darks) Separate white fabrics from colored fabrics.
• LINT (Lint producers, Collectors) Separate lint producers and lint collectors.
Lint Producers
Lint Collectors
Terry cloth, Chenille, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Check before Loading
• Check all pockets to make sure that they are empty. Things such as nails, hairclips, matches,
pens, coins, and keys can damage both your washer and your clothes.
• Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
• Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
• Pretreat any dirt and stains.
• Make sure the clothes are washable in water.
• Check the washing instructions.
• Remove tissue in pockets.
WIRE
Pretreatment on stains or heavy soil
• Pretreat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the washer.
Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.
• Use a pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.
(For more detail refer to page13)
Loading
Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).
Load Size
The WATER LEVEL should just cover the clothes. Adjust the load size
accordingly. Loosely load clothes no higher than the top row of holes in the
washer tub. To add items after washer has started, press Start button and
submerge additional items. Close the lid and press Start button again to restart.
WARNING
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Light and Large-sized clothing
Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and
wash them in a small amount of water. If the laundry floats during the wash cycle, it may
become damaged. Use dissolved Detergent to prevent the Detergent from clumping.
Long laundry items
Use nylon nets for long, DELICATE items. For laundry with long strings or long length , a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Before Starting to Wash
10
U
se of Water, Detergent, Bleach and Softener
Using Water
Amount of WATER LEVEL
• This machine detects the quantity of laundry automatically, then sets the
WATER LEVEL and proper amount of Detergent.
• When you select a wash program, the WATER LEVEL and amount of
Detergent (to be used) will be shown on the control panel.
• The following table shows the amount of water.
• When the WATER LEVEL is automatically detected, it may differ depending
on the quantity of laundry even though the same WATER LEVEL is indicated
on the control panel.
• The amount of a cup in the diagram is about 40g for concentrated Detergent.
NOTE
[ Minimum water amount ]
Water can be placed into the bowl by hand during each fill sequence. The machine will not start washing until
the minimum amount of water is in the bowl. If the unit pauses after starting, more water may be required in the
bowl.
Water Temperature
• The machine sets the appropriate temperature automatically according to the wash program .
• You can change the Water Temperature by pressing the WATER TEMP. button. (refer to page 14)
• The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning results.
We recommend temperatures of:
- HOT 49~60°C…(120-140˚F)
White items, diapers, underclothing and heavily soiled, colorfast items.
- WARM 29~40°C…(85-105˚F)
Most items
- COLD* 18~24°C…(65-75˚F)
Only very bright colors with light soil.
• When washing in COLD water additional steps may be needed:
- Adjust Detergent amount and pre-dissolve Detergent in WARM water
- Pretreat spots and stains
- Soak heavily soiled items
- Use appropriate bleach
* Temperature below 18°C…(65˚F) will not activate laundry additives and may cause lint, residue, poor cleaning, etc.
In addition, Detergent manufactures and care labels define COLD water as 26~29°C…(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the Detergent will not activate and clean effectively.
NOTE
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown or orange
spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be necessary for severe cases.
Using Detergent
Detergent
Follow the Detergent package directions. Using too little Detergent is a common cause of laundry problems.
Use more Detergent if you have hard water, large loads, greasy or oily soils or lower Water Temperature.
Choosing the right Detergent
We recommend the use of domestic Detergent, (powder, liquid or concentrated). Soap flakes or
granulated soap powders should not be used in your washing machine. When washing woolens
remember to use Detergent suitable for washing woolens.
11
se of Water, Detergent, Bleach and Softener
Using Detergent
How much Detergent
When you select a wash program the WATER LEVEL and the amount of Detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated Detergent.
The correct amount of Detergent will vary depending on the amount of soil in your clothes (Jeans and work
overalls may need more Detergent, while bath towels usually need less.).
For liquid and concentrated Detergents, follow the recommendations of the Detergent manufacturer.
Note: To check you are using the correct amount of Detergent, lift the lid of your machine about halfway through the wash. There should be a thin layer of foam over the surface of the water. Lots of
foam may look good, but it does not contribute to cleaning your clothes. No foam means not enough
Detergent has been used; soil and lint can settle back on the clothes or the washing machine.
If excess Detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, so use it accordingly.
Adding the Detergent
Open the Detergent dispenser and deposit the appropriate
Powder/Liquid Detergent dispenser
amount of Detergent
where you deposit the Detergent
Where you
Powder Detergent dispenser.
deposit the
Some Detergents MUST be fully dissolved before
detergent
adding to your machine to get the best wash results.
Check the instructions on the Detergent packet.
If you use powdered Detergent it is essential that the required amount be fully dissolved in very HOT water
before being added to WARM or HOTwater for the actual wash.
Pre-dissolving Detergent in WARM water when washing in COLD water can improve its performance.
Using Liquid Bleach
• Check clothing care label for special instructions and separate the
laundry to be bleached
• Dilute liquid chlorine bleach.
• Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
• Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
NOTE
Never pour undiluted liquid bleach directly onto clothes or into the wash basket.
This may cause change of color or damage the laundry.
Do not pour powdered bleach into bleach dispenser.
Bleach dispenser
Before Starting to Wash
U
Before Starting to Wash
12
U
se of Water, Detergent, Bleach and Softener
Using Fabric Softener
Available Fabric Softener Type
• Do not use concentrated fabric softener. This may cause some problems in automatic dispensing.
• For more details refer to the softener products instructions for use.
Depositing Fabric Softener
• Don't use softener with detergent. Use softener in
last rinse water
• When using dispenser, dilute softener (30ml)
with fresh water (30ml)
• When filling dispenser, do not splash or overfill.
It may stain clothes.
• Never pour fabric softener directly on clothes. It
may stain them
• If spotting occurs, wet and rub with hand
dishwashing liquid (or mild bar soap) and
rewash.
Powder Detergent / Fabric Softener dispenser.
Where you deposit
the softener
If the softener is over Fabric
filled, it can overflow. Softener Cap
Limit Line
Depositing
softener
don’t fill it
above the
limit line.
NOTE
Fabric Softener will be inserted automatically during the final rinse and the machine gives on alarm sound.
When water pressure is low, the softener may have to be inserted manually.
Can not use the Softener at Normal course water level XL (Water saving course).
Scrud(Waxy Build up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with Detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it can result in stains on your clothes or an unpleasant
smell in your washer.
If you wish to use fabric softener we recommend
• Using fabric softener sparingly.
• When filling the dispenser, do not splash or overfill.
• Clean dispenser as soon as the cycle is finished.
• Clean your machine regularly. (refer to page 22 or 33)
• Cold water washing increases the chance of this build-up occurring. We recommend a regular WARM or
HOT wash e.g. every 5th wash should be at least a warm one.
• Fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a
build-up.
13
pecial Guide for Stain Removal
WARNING
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
• Read and comply with all instructions on stain removal products.
• Keep stain removal products in their original labeled containers and out of children’s reach.
• Thoroughly wash any utensil used.
• Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
• Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.
• Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
For successful stain removal:
• Remove stains promptly.
• Determine the kind of stain, then follow the recommended treatment in the stain
removal chart below.
• To pretreat stains, use a prewash product, liquid Detergent, or a paste made from
granular Detergent and water.
• Use COLD water on unknown stains because HOT water can set stains.
• Check care label instructions for treatments to avoid on specific fabrics.
Follow fabric care label
• Check for colorfastness by testing stain remover on an inside seam.
instructions
• Rinse and wash items after stain removal.
Stain Removal
STAIN
Adhesive tape, chewing gum,
rubber cement
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Ink
Mildew, scorch
Mud
Mustard, tomato
Nail polish
Paint, varnish
Rust, brown or yellow
discoloration
Shoe polish
TREATMENT
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or
nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using COLD water and bleach safe for fabric.
Rinse with COLD water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using
bleach safe for fabric.
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before washing. Badly
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular Detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash using bleach
safe for fabric.
Before Starting to Wash
S
Before Starting to Wash
14
F
unction of each Button
WATER TEMPERATURE
BUTTON (OPTION)
• Use to select Water
Temperature.
Pressing the button allows
you to select COLD
WARM (HOT&COLD)
HOT COLD
respectively.
Default setting is COLD.
WATER LEVEL BUTTON
(INDICATION OF DETERGENT AMOUNT)
TIME LEFT, DELAY START
(RESERVATION), ALARM INDICATION
• Use to adjust the WATER LEVEL as required. The
appropriate amount of Detergent is shown next to the
WATER LEVEL in the WATER-DETERGENT diagram
• WATER LEVEL is automatically selected for FUZZY,
NORMAL program.
The following settings are indicated as the button is pushed
LARGE LARGE EX-LARGE EX-LARGE
SMALL SMALL MEDIUM MEDIUM
MEDIUM LARGE LARGE
• Time left - During operation, the remaining time
is indicated.
• DELAY START INDICATION
(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication -When an error occurs, an error
message appears to indicate the abnormality.
For example,
indicates that the lid is open.
AIR DRY
DELAY START (RESERVATION) BUTTON
WASH. RINSE. SPIN BUTTON
• This button is used for air-drying of your
laundry.
• Air dry selections light up in sequence as
follows.
30min. 1hr. 2hr. 30min. as the
button is pushed.
• Use to set a delayed finishing time.
• The time increases when the button is
pushed.
• The following settings are indicated as
the button is pushed 3 4 5
...11 12 14 16 ...46
48 3 HOUR.
• To cancel delay time, turn the power
switch off.
• Use when wash, rinse, spin
time need to be adjusted.
• The time increases when the
button is pressed .
• If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes.
• When the button is pressed
during washing, the remaining
time is displayed.
(refer to page 24)
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
15
• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange
and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as
follows:
If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength,
and the LED automatically turns to red.
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by
increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and the
LED turns to green.
AUTO OFF
(POWER) BUTTON
• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically about
10 seconds after the wash is finished.
CHILD LOCK FUNCTION
• Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the RINSE and
SPIN buttons simultaneously and
to unlock push them one more
time during the washing process.
(refer to page 25)
PROGRAM BUTTON
• Use for selecting wash program.
• This button allows you to select 8
different programs for different kinds of
laundry and dirtiness.
• program selections light up in sequence as
follows: FUZZY DELICATE
QUICK WASH JEAN WOOL
SILENT FAVORITE NORMAL
FUZZY etc. Select the desired
program by pressing the button.
START/ PAUSE BUTTON
• Use to start or pause the
washing process.
• Repeats start and pause by
pushing the button.
* Even if the water level or the water temperature are changed by the user in FUZZY Program,
the sensor will still work. The sensor algorithm may differ according to models.
* The control panel may differ according to different models.
Before Starting to Wash
WASHING CONDITION INDICATOR (OPTION)
Washing Programs
16
W
ashing Programs
Add
the
laundry
Washing
Programs
FUZZY Wash
Used for normal loads, this mode
automatically selects the most
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
detects the size of the load and the
ideal wash power and wash, rinse
and spin times are set accordingly.
QUICK WASH
1
2
WOOL Wash
1
3
DELICATE
2
Select the
QUICK WASH
program on
the Control
panel.
1
3
Spread
the jean
evenly in
the tub
1
3
Use this program for washing delicate
fabrics such as lingerie and woolens.
(wash only “machine washable” clothes)
Before washing your woolens read the
care label for the washing instructions.
(wash only machine washable clothes)
Use this program to wash items
requiring a GENTLE WASH action.
This would include blouses, nylons
and dress shirts with light soiled.
4
Add the appropriate quantity
of Detergent as indicated by
the WATER LEVEL next to
WATER DETERGENT.
Or follow the Detergent
manufacturer’s instructions
Use this mode when washing
lightly soiled clothes for a short
time. The highly recommended
laundry amount is under 2.0kg.
JEAN Wash
Use Jean program when washing
Jeans of different sizes
Add
the Detergent
2
3
Add the appropriate quantity
of Detergent as indicated by
the WATER LEVEL next to
WATER DETERGENT.
Or follow the Detergent
manufacturer’s instructions
5
Select the JEAN
program on the
Control panel.
2
Select the
WOOL
program on
the Control
panel.
1
5
2
Select the
DELICATE
program on the
Control panel.
5
Use neutral Detergent
appropriate for the
laundry.
When washing
woolens use a mild
Detergent recommended for washing wool.
5
17
3
The pulsator rotates for 8
seconds to detect the
laundry load.
Then the WATER LEVEL and
the amount of Detergent to
be used will be shown and
water will be supplied.
5
Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.
Finish
Caution & Note
6
When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.
4
6
7
4
6
7
4
6
7
4
6
7
If water is already in the tub, or putting
wet laundry into the tub before starting
will increase the WATER LEVEL.
With lightweight bulky loads, WATER
LEVEL can be set low.
Changes to Water Temperature
(HOT/COLD) and wash level are
possible during operation.
(refer to page 14)
When setting the WATER LEVEL manually,
do not set to Medium to prevent damage to
laundry.
Washing with HOT water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg.
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may
still contain some water. This is normal.
Before starting to wash, make sure that the
laundry is washable.
Washing with HOT water may damage the
laundry (Water is set to COLD
automatically).
Ensure that the load is under 2kg.
Washing Programs
Close the lid
Washing Programs
18
S
OAK Wash
Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty.
SOAK mode can be used with FUZZY or JEAN or SILENT or FAVORITE program.
1
Press the AUTO OFF (POWER) button to turn power on.
2
Press the PROGRAM button to select the washing program.
• SOAK will not work in WOOL and QUICK WASH,
DELICATE Program.
3
Press the WASH button, to select SOAK program.
• Keep pressing the WASH button until
the light turns on ‘Soak’ and ‘Wash’
simultaneously as next image.
• SOAK program only works when
socking time is 40, 50 or 60 minutes.
4
Add the Detergent.
5
Add the laundry and press the START/PAUSE button.
• The appropriate quantity of Detergent marked next to the
WATER LEVEL of WATER-DETERGENT.
• The WATER LEVEL and the amount of Detergent to be
used will be shown and water will be supplied.
6
Close the lid.
• Water will be supplied for 2 minutes after the start of the
wash to supplement the absorbed water by the laundry.
Finish
• When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
NOTE
• Order of Soak-Wash timing
Soak-Wash
min
min
min
min
min
min
min
min
Lamp
Off
min
min
min
• Select soaking time 40minutes, 50minutes, or 60minutes (including washing time) by pressing
the Wash button repeatedly.
• If necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin
buttons till you reach the desired times.
min
min
19
Pressing the FAVORITE button allows you to store your FAVORITE wash conditions in the
normal cycle memory and then recall it for use at a later time.
1
Press the AUTO OFF (POWER) button to turn power on.
2
Select the FAVORITE program.
3
Select your FAVORITE wash conditions.
• Press the WATER TEMP. button to select wash Water
Temperature.
• Press the WATER LEVEL button to select
WATER LEVEL.
• Press the WASH button, the RINSE button & the SPIN
button to select wash time, rinse time & spin time
respectively you want to store.
4
Press the START/PAUSE button to store & start your FAVORITE wash cycle.
Power turns off automatically after wash.
NOTE
To recall your FAVORITE cycle.
1. Press POWER on.
2. Select the FAVORITE cycle by pressing the PROGRAM.
3. Press the START/PAUSE button. Then the wash cycle starts.
Washing Programs
F
AVORITE Wash
Washing Programs
20
S
ILENT Wash
Use this program to wash quietly in SILENT especially during late night and dawn.
1
Press the AUTO OFF (POWER) button to turn power on.
2
Press the PROGRAM button to select SILENT program.
3
Add the laundry into the washing tub.
4
Press the START/PAUSE button.
5
Add the Detergent and close the lid.
NOTE
• The SILENT program lengthens the wash time compared to a normal, or FUZZY program. In the
SILENT program, the spin RPM is reduced, so at the end of the spin, the laundry will have more
than the normal moisture.
21
Normal is the economical program to minimize water consumption.
1
Press the AUTO OFF (POWER) button to turn power on.
2
Press the PROGRAM button to select the NORMAL program.
Ex-Large WATER LEVEL is set automatically.
3
Add the laundry into the washing tub.
4
Press the START/PAUSE button.
5
Add the detergent and close the lid.
• Remaining time is displayed.
When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid.
NOTE
• The Normal program uses Fuzzy logic and will accept all types of clothes.
Washing Programs
N
ORMAL
Additional Function Program
22
A
IR DRY
AIR DRY for your laundary.
1
Press the AUTO OFF (POWER) button to turn power on.
2
Press the AIR DRY button to select the desired timing.
3
Press the START/PAUSE button.
4
Closed the lid.
NOTE
Select “Air Dry” 30min
Tub Dry
-Use this mode to keep inner tub from getting moldy caused by remaining moisture.
- Do not place any laundry inside tub.
- Use this mode once a week.
Caution) For better performance during this function, put drain hose down to the floor waste so
that water inside will be completely drained out.
Select “Air Dry” above 1 hour
- Use this mode to reduce the drying time by minimizing remaining moisture on the laundry.
- In general, this is very effective on synthetic items(100% polyester).
- Will effectively reduce the drying time for laundry under 2kg. when placed evenly in the tub.
- For normal clothes : Select 1 hour
- For synthetic items(100% polyester): Select 2 hours or 3 hours only applicable to some models.
23
1
2
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.
Press the AUTO OFF (POWER) button to turn power on.
Only Wash
Only Rinse
Press the WASH button to Press the RINSE button to
select the desired timing.
select the desired times of
rinse.
Only Wash,Rinse
Press the WASH button to
select the desired timing.
Press the RINSE button to
select the desired times of
rinse.
Only Rinse,Spin
Press the RINSE button to
select the desired times of
rinse.
Only Spin
Press the SPIN button to
select the desired times of
spin.
Only Drain
When you want to only
drain, wait until the water
in the washing tub drains
completely.
Press the SPIN button to
select the desired times of
spin.
You can use this option
for preventing wrinkles of
laundry
3
Press the WATER LEVEL button, to control the water level according to the
amount of laundry. If you do not choose anything, it is set the middle water
level automatically.
4
Add the laundry into the washing tub.
5
Press the START/PAUSE button.
6
Add the detergent and close the lid.
NOTE
• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not
be drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.
• If you do not specify the water level, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.
Additional Function Program
O
ption Washing
Additional Function Program
24
D
ELAY START (RESERVATION) Wash
DELAY START (RESERVATION) Wash is used to delay the finishing time of the operation.
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time , not the start time.
1
Press the AUTO OFF (POWER) button to turn power on.
2
Press the PROGRAM button to select the washing program.
• Select the program for laundry on the Control panel.
This program will not work in WOOL and DELICATE
Program.
3
Press the DELAY START (RESERVATION) button.
• The light will ‘ DELAY’ turn on and
‘TIME LEFT’
will be marked.
• Press the button repeatedly to set the desired finishing time.
For example, To finish washing in 9 hours from now, by
make the number 9:00 pressing the DELAY START
(RESERVATION ) button repeatedly.
(RES.=DELAY)
4
Add the Detergent.
5
Add the laundry and press the START/PAUSE button.
• The appropriate quantity of Detergent marked next to
the WATER LEVEL of WATER•DETERGENT.
• When the lid is open the machine will not operate, and
an alarm signal will remind you to close the lid
• When you press the START/PAUSE button the light will
blink.
6
Close the lid.
• Water will be supplied for 2 minutes after the start of the
wash to supplement the water the laundry has absorbed.
Finish
• The washing will be finished according to the delayed time.
NOTE
• Finishing time can be delayed from 3~48 hours. Delaying from3~12 hours can be done in 1 hour time intervals
and from 12~48 hours in 2 hour time intervals.
• If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the
DELAY START (RESERVATION) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning
program . (The laundry will be wrinkled if left for a long time after spinning.)
25
Child Lock Function
If you want to lock all the keys to prevent settings from being changed by a child, you can use the
child lock option.
How to Lock
1
Press the AUTO OFF (POWER) button.
Turn Power on.
2
Press the START/PAUSE button to start washing.
After all washing conditions are set according to the manual.
3
Press both the RINSE button and the SPIN button for 2 second simultaneously.
During the wash program, all the buttons are locked
until washing is completed or it is child- lock
function is deactivated manually.
How to Unlock
If you want to unlock during wash, press both the RINSE and the SPIN button for 2 second simultaneously
again.
NOTE
“
” & the remaining time are alternatively shown on the display while they are locked.
Mute Option
If you want to use the washing machine without alarm signal sounds, press both the WASH and SPIN
buttons simultaneously.
To make buzzer work, press both the WASH and SPIN buttons simultaneously one more time.
Seeing Remaining Time
To see the remaining time for each process, press one of the WASH, RINSE and SPIN buttons.
The remaining time for each process will appear for about 1 second.
Additional Function Program
O
ther Useful Functions
26
Installation
I
nstallation
Caution
Improper installation of the washer may cause noise and malfunctioning.
1. The ventilation openings in the base area must not be ostructed by carpet when the washing
machine is installed on a carpeted floor.
2. Install the washing machine on a level and firm surface.
1 Installation area
How to adjust level
• Install the washer on a flat and firm surface.
4 Horizontal setting
• Lift up the front of the washer and adjust the
level indicator bubble to the center by turning
the adjustable legs clockwise or using the
adjusting plate.
Caution
• If the washer is installed on an uneven, weak, or slippery tiled floor, it can cause excessive
vibration leading to spin failure, indicated by a "UE" error. It must be placed on a firm a and
level floor to prevent spin failure.
27
3 Checking slope
• Open the lid and check if the washer is correctly
leveled by refering to the level indicator.
• Check if installation surface is tilted.
(Try to shake the washer and check if the
washer is firmly installed.)
5 Confirming level
6 Distance between drain hose and the wall
• Place the washer to original position and
confirm the level as in figure 2. (Try to shake the
washer and confirm the level.)
• Check the location of the
level in the front of washer.
• Distance between drain hose and the wall
should be more than 10cm, and the distance
between the wall should be more than 2cm.
Caution
• If the appliance is supplied from a cord extension set or electrical portable outlet device the
core extension set or elecerical portable outlet device should be positoined so it is not subject
to splashing or ingress of moisture.
How to sue the adjusting plates
• Use the adjusting plates to level the washer when the
adjustable legs cannot cover the gap.
Installation
2 Checking level
28
Installation
I
nstallion
How to install the drain hose
1. Fit the machine end of the drain hose to the outlet of the
drain pump and tighten the clamp.
2. Put the other end of the drain hose over the standpipe or
wash tub.
3. Fit the plastic holder into the holes located at either side of
the rear of the machine. The holder will fit in either
direction accordign to location of the standpipe. Make sure
that the holder holds the drain hose firmly so that the
drain hose does not hang down as shown in the fig.
NOTE
• To prevent syphoning, the drain hose should not extend more
than 50 mm from the end of the hose guide.
• The discharge height should be approximately 0.9~1.2m from
the floor.
Flooding drainage
• Your machine requires a floor drainage slope (or hole)that will SAFELY DISPOSE of the FULL FLOW of
any water that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in an area with a
drain hole (or slope)that will prevent any possibility of water damage to floor coverings or property.
Connect the inlet hose
• Check that sealing washers are firmly seated.
• Attach the curved end of the hose to the inlet valve of the
washing machine;
Tighten the coupling nuts securely by hand.(Fig.1)
• Attach the straight end of the hose to the tap.
Tighten the coupling nuts securely by hand.(Fig.2)
• Either hose can be attached to hot inlet valve and tap.
• Turn on the taps and check for leaks.Tighten the
coupling nuts firmly if there is any leakage.If water
pressure is strong,close the water tap completely then
open it slightly.
Caution
• Do not install the washer where it is directily exposed to sunlight, wind, rain, etc.
• Plug the power cord of this washer into a properly installed standard power point that is switched & earthed.
• Permissible water temperature : Max 60˚C(140˚F)
• Permissible water pressure : Max 87 psi (600 kPa, 6.0 kg/cm2), Min 7.2 psi (50 kPa, 0.5 kg/cm2)
• If water temperature & pressure if greater than above, it may cause damage to the machine. If ou have uncontrolled
water temperature & pressure you should fit a temperature & pressure relief valve to ensure that water temperature
& water pressure remains within the safe limits. Consult a plumber or electrician if you are unable to adjust water
temperature and pressure.
• Do not over tighten the coupling nuts with a tool. Inlets plastic : Do not strip of crossthread.
29
C
onnecting Water Supply Hose
Connecting Water Supply Hose to water tap
Normal Type
1
(Normal tap without thread & screw type inlet hose.)
Untighten the screw
Rubber packing
Untighten the screw of the connector so that the
tap can be placed in the middle.
2
screw
Connector
Fixing the connector to the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
3
Attach the water supply hose securely to the
connector
Push the water supply hose vertically upwards so
that the rubber seal within the hose can adhere
completely to the tap.
4
Connector
Water
Supply Hose
Fixing the connector to the water supply hose
Attach the water supply hose to the connector and
then tighten it by screwing it to the right.
5
Check the connection of water supply hose and the connector
After connecting the hose, open the tap to check
for any water leakage.
If the water leaks, close the tap and start again
from step 1
NOTE
The washing machine is to be connected to the water mains using new hose-sets and old hose-sets should
not be reused.
Installation
Before connecting the Water Supply Hose to the water tap, check the hose type and then
choose the correct instruction here under.
Note that the Water Supply Hose supplied may vary from country to country, Make sure to
connect the blue inlet hose to the COLD water tap, and the orange inlet hose to the HOT
water tap.
30
Installation
C
onnecting Water Supply Hose
Normal Type
1
(Normal tap without thread & one touch type inlet hose.)
Separate Middle connector from Water Supply Hose
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose.
Middle
connector
Fixed Sticker
Pressing Handle
Pressing Rod
Water Supply Hose
2
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
Rubber packing
screw
Fixed sticker
NOTE
In case tap is too large.
Guide plate
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate. Then follow step1.
3
Fixing Connectors to the Tap
Rubber packing
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
4
Fixing Upper Connector and Middle Connector
Remove the fixed sticker in between the Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
5
Connector
Middle
Connector
Fixed sticker
Connecting Middle Connector and Water Supply Hose
Press down the pressing rod of the Water Supply
Hose which was separated from middle connector
(refer to Step1) and then join it to the middle
connector.
Pressing rod
Water Supply Hose
6
Connector
Middle
Connector
Check for water leakage
After connecting the hose, open the tap to check
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
If you skip step 1, water leakage may occur.
Pressing handle
31
C
onnecting Water Supply Hose
Installation
Screw Type
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
Water
tap
Rubber Packing
Water Supply Hose
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then
tighten it by screwing it to the right.
3
Check water leakage.
After connecting the hose, open the tap to check
for any water leakage.
Connecting Water Supply Hose to the machine
• Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
• Check to see if there is a rubber seal inside the
connector.
Hose connector
Rubber seal
Care and Maintenance
32
G
rounding Method
Earth wire should be connected.
If the earth wire is not connected, there is possible a danger of electric shock caused by
the current leakage .
Grounding Method with Ground insert space Terminal
If the AC outlet has a ground terminal, then separate
grounding is not required. Note that AC power outlet
configurations may differ from country to country
Caution
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers
only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the appliance.
Other Grounding Method
Burying Copper Plate
Connect the Ground Wire to a Ground Copper
Plate and bury it more than 75cm in the ground.
Ground Wire
75cm
Ground Copper Plate
Using a Short Circuit Breaker
If grounding methods described above are not
possible, a separate circuit breaker should be
employed and installed by a qualified electrician
Short-circuit
breaker
Caution
• To prevent a possible explosion, do not connect ground to a gas pipe
• Do not connect ground to telephone wires or lightning rods. This may be dangerous during electrical
storms
• Connecting ground to plastic has no effect
• Ground wires should be connected when an extension cord is used.
33
leaning and Maintenance
Cold water washing
• If you always use COLD water, we recommend that a WARM or HOT wash be used at a regular
intervals e.g. every 5th wash should be at least a WARM one.
When you have finished
• Turn off taps to prevent the chance of flooding should a hose burst.
• Always unplug the power cord after use.
When water supply into the tub is not clean or the filter is clogged with particles (such as sand), clean the
filter in the inlet valve occasionally.
(The figure of power cord and water tap may vary according to the country)
To Clean the Filter in the Inlet Valve
1
Close the tap before turning off the power.
Select both HOT/COLD and then press the
[START/PAUSE] button to remove water
from the machine completely.
2
Turn off the power before
pulling out the cord.
3
After removing the water supply
hose pull out the filter.
Then use a brush to clean the filter.
4
Replace the filter after cleaning it.
NOTE
• Before cleaning the filter, the impurities in the water supply hose should be removed.
To Clean the Lint Filter
1
Pull out the lint filter from
the tub in the direction
shown below.
2
Turn the net inside out to
clean the filter and rinse it
with water.
3
Replace- the filter to the
original location. Push the lip
of the filter until a pop sound
is heard.
NOTE
• If the lint filter is torn or damaged, purchase a new one from LG service center.
To Clean the Pump casing (for pump model)
1
Place a towel on the
floor under the drain
pump cap. Excess
water may flow out.
2
Turn the cap
counterclockwise and
pull it out.
Cap
3
Remove any foreign
objects and fluff inside
pump casing and from the
filter.
Filter
4
Replace the cap. Insert the filter along
the guide ribs inside the pump casing.
Filter must face the guide ribs inside
pump casing and securely turn the cap
clockwise.
Guide rib
Filter
NOTE
• Check if water leaks after reassembling. (The Rubber ring is in the cap)
Care and Maintenance
C
Care and Maintenance
34
C
leaning and Maintenance
When there is a fear of freezing
• Close the water taps and remove the Water Supply Hose.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.
If frozen
• Remove the water supply hose, and immerse it in HOT water at approx.. 40˚C.
• Pour approx.. 2 liters of HOT water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs the
supply and drainage of water.
Wash Inner-tub
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
the inner-tub use a clean soft cloth dampened with liquid Detergent, then rinse. (Do
not use harsh or gritty cleaners.)
Inlet Hoses
Exterior
Hoses connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp
objects.
Long Vacations
Be sure water supply is shut off at faucets. Drain all water from hoses if weather will
be below freezing.
Cleaning the Inside of your Washer
If you use fabric softener or do regular COLD water washing, it is very important that you occasionally clean the
inside of your washer.
• Fill your washer with HOT water.
• Add about two cups of a powdered Detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle.
Products that might damage your washing machine
• Concentrated bleaches and diaper sanitizer will cause damage to the paintwork and components of your washer.
• Hydrocarbon solvents i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and blister paint
(Be careful when washing garments stained with these solvents as they are flammable DO NOT put them in
washer or dryer.)
• Some pretreatment sprays or liquids can damage your washer’s control panel.
• Use of dyes in your washer may cause staining of the plastic components. The dye will not damage the machine
but we suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in
your washer.
• Do not use your washer lid as a work surface.
35
C
ommon washing problems
WASH PROBLEM
Problems
Possible Causes
Solutions & Preventive Measures
Poor soil
removal
• Not enough Detergent
• Wash Water Temperature
too low.
• Overloading the washer
• Incorrect wash cycle
• Incorrect sorting
• Do not pretreat stain
• Use correct amount of Detergent for load size, amount of
soil and water Hardness.
• Use WARM or HOT water for normal soil.
Different Water Temperature may be required according to
soil type. (refer to page 10)
• Reduce load size.
• Wash with JEAN or SOAK & JEAN wash cycle for heavy
soiled laundry.
• Separate heavily soiled items from lightly soiled ones.
• Pretreat stain and heavy soil according to directions shown
on page 9.
Blue Stains
• Undiluted fabric softener
dispensed directly onto
fabric
• Rub the stain with bar soap. Wash.
• Do not overfill fabric softener dispenser and do not pour
liquid fabric softener directly onto fabric.
See page 12 for more instructions.
Black or gray
marks on
clothes
• A buildup caused by the
interaction of fabric softener
and Detergent can flake off
and mark clothes
• Not enough Detergent
• Keep the recommendations against Scrud(waxy buildup).
(refer to scrud page12.)
• Use correct amount of Detergent for load size, amount of soil
and water Hardness.
Yellow or
brown rust
stains
• Iron or manganese in
water supply, water pipes,
or water heater
• To restore discolored load of whites, use rust remover safe
for fabric.
• Install nonprecipitating water softener or an iron filter in
your water supply system for an ongoing problem.
• Before washing, run water for a few minutes to clear lines.
Lint
• Incorrect sorting
• Tissues left in pocket
• Overloading the washer
• Wash lint givers eg towels, flannelette sheets, separately
from lint collectors eg synthetic fabrics and remove tissues in
pockets before wash. See page 9 for sorting and caring
before loading.
• Do not overload the washer
Residue or
Detergent
• Overloading the washer
• Undissolved Detergent
• Use too much Detergent
• Do not overload the washer.
• Some Detergents need to be pre-dissolved, check the Detergent
instructions. Try pre-dissolving the Detergent.
• Increase Water Temperature using HOT water safe for fabric.
• Use proper amount of Detergent.
Holes, tears,
or snags
• Incorrect use of chlorine
bleach.
• Unfastened zippers,
hooks, buckles
• Ribs, tears and broken
threads
• Overloading the washer
• Degradation of fabric
• Never pour chlorine bleach directly on fabric.
See page 11 for adding liquid bleach.
• Fasten zippers, hooks, and buckles.
• Remove objects in pockets. See page 9 for caring before
loading.
• Do not overload the washer.
Troubleshooting
Many washing problems involve poor soil & stain removal, residues of lint and scum, and
fabric damage. For satisfactory washing results, follow these instructions.
36
Troubleshooting
T
roubleshooting
Before calling for service, check the problem against the list bellows.
Symptom
Water Supply
Failure
Error Message
Check up
. Is the water tap shut off?
. Is the water supply cut off ?
. Is the tap or water supply hose frozen ?
. Is the water pressure low or is the filter of the inlet
valve clogged with impurities?
. Is the Hot hose connected to cold?
. Is the Cold hose connected to hot?
Drainage Failure
. Is the drain hose positioned correctly?
. Is the drain hose bent or placed too high?
. Is the internal part of the hose or drain pump
(only pump model) clogged with impurities?
. Check if electric power has gone off.
Spin Failure
Door(Lid) Open
. Is the laundry evenly balanced?
. Is the washing machine placed on a flat surface?
. Is the lid closed?
. Please call your nearest LG Electronics service center
Internal sensing
failure
Power failure
Overflow failure
for help.
37
What Is Not Covered:
• Service trips to your home to teach you how to use the product.
• If the product is connected to any voltage other than that shown on the rating plate.
• If the fault is caused by accident, neglect, misuse or Act of God.
• If the fault is caused by factors other than normal domestic use or use in
accordance with the owner's manual.
• Provide instruction on use of product or change the set-up of the product.
• If the fault is caused by pests for example, rats or cockroaches etc..
• Noise or vibration that is considered normal for example water drain sound, spin
sound, or warming beeps.
• Correcting the installation for example, levelling the product, adjustment of drain.
• Normal maintenance which recommended by the owner's manual.
• Removal of foreign objects / substances from the machine, including the pump and
inlet hose filter for example, grit, nails, bra wires, buttons etc.
• Replace fuses in or correct house wiring or correct house plumbing.
• Correction of unauthorized repairs.
• Incidental or consequential damage to personal property caused by possible defects
with this appliance.
• If this product is used for commercial purpose, it is not warranted.
(Example : Public places such as public bathroom, lodging house, training center,
dormitory)
If the product is installed outside the normal service area, any cost of transportation
involved in the repair of the product, or the replacement of a defective part, shall be
borne by the owner.
Terms of Warranty
T
erms of Warranty
38
Specification
S
pecification
2 hr
1 hr
30
(Tubdmin.
ry)
QUICK
Wash
ash
H
W
Model
WF-T857
Size
632(W) x 670(D) x 1020(H)
Water tap pressure
50 - 600 kPa (0.5 - 6.0 kgf/cm2)
Wash Capacity
8.5kg
D
In our continuing effort to improve the quality of our appliances, it may be necessary to make changes to the
appliance without revising this manual.
M
emo
P/No.: MFL30138460
Download PDF

advertising