LG | WT-H755TH | LG WT-H755TH Owner’s Manual

MODELS
:
WT-H555TH / WT-H755TH
Please read this manual
carefully
before
operating your product.
Retain it for future reference.
Record model
name
and serial number of the
product.
Quote this information to your dealer if you require service.
P
roduct Features
Washer doesn't operate while the lid is open. If the lid is open
rinse or spin cycles, the operation stops for safety.
The
during the wash,
washing machine may during normal usage cary out an operational test.
a programed check to ensure reliability and does not indicate a fault.
This is
I
?
sensor
The
automatically detects the quantity of a Detergent selected by a user and the
temperature and the quality of water to determine the best washing algorithm for washing
and rinsing, which will give the best washing effect.
sensor
FUZZY
?
logic control
A built-in load
sensor
optimizes washing
SENSING
Laundry Sensor
START
Water Level Sensor
?
Advanced
ensures
3
?
automatically detects the laundry
conditions such
SETTING
Optimum
Washing
as
load and a microprocessor
ideal WATER LEVEL and washing time.
AUTO
POWER
OFF
WASHING
condition
technology is built into the
washing result.
Electronic Control
System which
the best
Type Washing Methods (Direct
3 actions
are
Pulsator
used to create the best
washing
results with minimal
Drum rotates
rotates
with the cloth
ATTENTION
:
Be
Drive
System)
tangling.
Water pours down
and circultes
sure
to
remove
the
product
from the carton base,
otherwise the machine will not be able to
operate properly.
4
S
Introduci
afety
Information
Read carefully and thoroughly through this booklet as it contains important safety information
that will protect the user from unexpected dangers and prevent potential damages to the product.
This booklet is divided into 2
:
This is
be
:
parts
:
Warning
warning sign specifying
dangerous.
This is
a
a
sign specifying 'Strictly
and Caution.
user's
applications which might
Forbidden'
applications.
Warning
:
comply with the instructions under this
sign may result in major physical injuries or death.
Caution
:
Failure to
comply with
sign may
damages
result in minor
Failure to
WATER
to the
the instructions under this
physical injuries
or
product.
Warning
HEATER
SAFETY
?
hydrogen gas may be produced in a water heater that has not been
Hydrogen gas can be explosive under these circumstances.
If the HOT water has not been used for two weeks or more, prevent the possibility of
damage or injury by turning on all Hot water faucets and allowing them to run for several
minutes. Do this before using any electrical appliance which is connected to the HOT
water system. This simple procedure will allow any built-up hydrogen gas to escape. Since
the gas is flammable, do not smoke or use an open flame or appliance during this process.
Under certain conditions
used for two weeks
PROPER
or more.
Caution
INSTALLATION
?
?
The base
opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
If the product is exposed to such conditions, electric shock, fire, break down or
deformation may
?
Properly
occur.
ground washer to conform with all
governing codes and ordinances.
Follow details in
Installation Instructions.
?
If not
grounded properly, break down and leakage of electricity may occur, which
cause
electric shock.
Must be
positioned so that the plug is accessible.
If the
plug is placed between the wall
causing fire or electric shock.
?
Make
may
sure
the
and the
machine,
it may
get damaged, possibly
plug is completely pushed into the outlet.
Failure to do
so
may
cause
electric shock and fire due to
overheating.
5
S
afety
Information
YOUR
Warning
LAUNDRY
AREA
?
Keep the
underneath and around your
area
materials such
as
lint,
paper, rags,
Operating with such
explosion or fire.
?
appliances
chemical,
free of combustible
etc.
materials around the machine may
trigger
supervision is necessary if this appliance is used by or near children or
infirm persons. Do not allow children to play on, with, or inside this or any other appliance.
There is potential danger that children might drown in the tub.
Close
Do not touch the power
It will
cause
plug with
a
wet hand.
electric shock
hand, foot
anything under the washing machine
operation.
There is a rotating mechanism under the machine, so you could be injured.
Do not put your
while the
WHEN USING
washing
or
machine is in
Caution
THE WASHER
?
?
?
appliance only for its intended purpose as described in this OwnerOs Manual.
laundry process can reduce the flame retardancy of fabrics. To avoid such a result,
carefully follow the garment manufacturerOs wash and care instructions.
To minimize the possibility of electric shock, unplug this appliance from the power
supply or disconnect the washer at the household distribution panel by removing the
fuse or switching off the cirduit breaker before attempting any maintenance or cleaning.
Use this
The
NOTE
Pressing
:
Power button to turn off does NOT
disconnect the
?
Make
sure
that
drainage
is
appliance
from the power
supply.
working properly.
If water is not drained
may induce
?
properly, your floor may get flooded. Flooded floors
electricity leakage, further resulting in electric shock or fire.
If, during spinning, opening the lid does
immediately
Call for
discontinue
repair. A
operating
not
stop the tub within about 15 seconds,
the machine.
machine that
spins with its
door open may
cause
injuries.
Never reach into washer while it is
Wait until the machine has
Even slow rotation
moving.
completely stopped before opening the
can cause
Never attempt to operate this
disassembled, or has missing
Operating with
Do not
use
a
lid.
injury.
appliance if it is damaged, malfunctioning, partially
or broken parts, including a damaged cord or plug.
damaged plug
may
cause
electric shock.
water hotter than 50°C.
Use of excessively hot water may
leakage of water.
cause
damage to
fabrics
or cause
Introduci
6
S
Introduci
afety
Information
WHEN USING
Warning
THE WASHER
Do not
use a
plug
equipment for more than their rated capacity.
shock, fire break down, and/or
socket and wiring
Exceeding the limit may lead to electric
deformation of parts.
Do not mix chlorine bleach with ammonia
Mixing
different chemicals
can
or
,
acids such
produce
as
vinegar and/or rust remover.
toxic gases which may
death.
cause
dry articles that have been cleaned in, washed in, soaked in, or spotted
or explosive substances (such as wax, oil, paint, gasoline, drycleaning solvents, kerosene, etc). Do not add these substances to the wash water.
Do not use or place these substances around your washer or dryer during operation.
Do not wash
or
with combustible
It may
WHEN NOT
ignite or explode.
Caution
IN USE
?
Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage
if a break or rupture should occur. Check the condition of the fill hoses; they may need
replacement after 5years.
?
?
?
When the air temperature is high and the water temperature is low, condensation may
occur and thus wet the floor.
Wipe off dirt or dust on the contacts
of the power plug.
Using unclean power plug
cause
may
fire.
discarding a washer, or removing it from service, remove the washer lid to
prevent children from hiding inside.
Before
Children may be
and suffocated if the lid is left intact.
trapped
Do not attempt to
repair or replace any part of this appliance unless specifically
recommended in this Owner's Manual, or in published user-repair instructions
that you understand and have the skills to carry out.
Operating the
cause
for fire
machine with
or
improperly replaced parts
may be
a
electric shock.
Do not tamper with controls.
It may lead to electric
shock, fire break down, deformation.
,
Do not yank the power cord in an attempt to disconnect the power plug.
Securely hold the power plug to unplug the machine.
Failure to observe these instructions may
due to short-circuit
cause
electric shock
or
fire
directly to
any
.
When you are cleaning the washing machine, do not apply water
part of the washing machine.
It will
cause
short circuit and electric shock.
7
I
dentification of Parts
Introduci
Body
Accessories
Height adjustment
plate
Inlet hose
1 Each for cold and
2 Pieces
hot water
Drain hose
8
nstallation
I
Introduci
Connect the drain hose
Connect the drain hose to the outlet
Attach the
of the drain pump located at the
of the washing machine.
And then
clip to the drain hose.
push it toward the body of
the washing machine as indicated by
rear
the
Place the hose
guide over the
laundry tub or the stand pipe.
Do not
use an
extension hose.
arrow.
Wlthin 50mm
Hose Guide
NOTE:
?
Never
?
Be
sure
?
To
prevent syphoning,the drain hose should
lay
down the drain hose,
the drain hose is
as
properly
water will be
routed
so
Drain Hose
discharged.
it will not kink
not extend
lift from the sink.
or
more
than 50
mm
0.9~1.2m
from
the end of the hose
?
The
guide.
discharge height should
approximately
0.9~1.2mfrom the floor.
machine is to be connected to the water mains
"Washing
be reused
be
using new hose-sets
and that old hose-sets should not
"
Flooding drainage
?
Your machine
requires
a
floor
drainage slope (or hole)
that will SAFELY DISPOSE of the FULL FLOW of any water
that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make
slope)
that will prevent any
possibility of water damage to
sure
this machine is installed in
floor
coverings
or
an area
with
a
drain hole
(or
property.
Connect the inlet hose
?
?
Check that
sealing washers
machine ;
?
?
?
are
firmly seated.
Attach the curved end of the hose to the inlet valve of the
the
hand.
Tighten
coupling
securely by
straight end of the hose to the tap.
Tighten the coupling nuts securely by hand. (Fig.2)
nuts
washing
(Fig.1)
INLET
VALVE
TAP
Attach the
Another hose
SEALING
WASHER
be attached to hot inlet valve and tap.
Turn on the taps and check for leaks. Tighten the coupling nuts firmly
if there is any leakage. If water pressure is strong, close the water tap
can
TAP
SEALING
WASHER
completely then open it slightly.
END
MACHINE
END
(Fig. 1)
CAUTION
Do not install the washer where it is
Your machine
requires
a
floor
INLET
HOSE
(Fig. 2)
directly exposed to sunlight, wind, rain etc.
a properly installed standard power point that
the power cord of this washer into
earthed.
Plug
TWIST
drainage slope (or hole)
is switched &
that will SAFELY DISPOSE of the FULL
FLOW of any water that may leak out should the machine malfunction. It is therefore the OWNER'S
RESPONSIBILITY to make sure this machine is installed in an area with a drain hole (or slope) that
will
prevent any possibility of water damage to floor
Permissible water temperature : Max 70°C (160°F)
Permissible water pressure : Max
If water temperature &pressure is
coverings
or
property.
80psi (550kpa, 8kg/cm 2 ), Min 4psi (30kpa, 0.3kg/cm 2 )
greater than above, it may cause damage to the machine. If you
have uncontrolled water temperature & pressure you should fit a temperature & pressure relief valve
to ensure that water temperature & water pressure remains within the safe limits. Consult a plumber
or electrician if you are unable to adjust water temperature and pressure.
Do not over tighten the coupling nuts with a tool. Inlets are plastic : Do not strip or crossthread.
9
I
nstallation
CAUTION
CAUTION
Install the
?
?
?
?
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional outlets or branch circuits. Check the specification page of
this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any
of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if
its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the
cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the appliance.
machine
washing
on a
flat and firm surface.
washing machine on a level and firm surface.
Keep the washing machine more than 10cm from the wall to prevent vibration noise during spinning.
The base opening must not be obstructed by carpeting when the washing
machine is installed on a carpeted floor.
Wooden floors may need reinforcing to prevent the normal vibration which occurs with an unbalanced load.
Install the
10cm
CAUTION
?
If the washer is installed
or
"
UE
"
error can
on a
happen
uneven,weak
or
tilted floor
causing
excessive
vibration, spin failure
to it.
placed on a firm and level floor to prevent spin failure.
appliance is supplied from a cord extension set or electrical portable outlet device the
extension set or electrical portable outlet device should be positioned so it is not subject to
splashing or ingress of moisture.
It must be
?
Level the
washing
If the
core
machine
Check the level of the
spirit level on the
You
can
washing machine using a
side of the washing cabinet
check the level also
washer with the fills,
using the A.L spindle fitted to the cabinet.
legs up or down as required.
Additional height adjustment plates are provided in the accessory bag.
to allow for greater adjustment of the legs.
When washing machine does not even out, turn A.L SPINDLE
right or left to be level.
Should the height adjustment exceed the maximum
allowed by the A.L SPINDLE, place height
adjustment plats provided under
the legs as shown in the
diagram.
You
?
?
?
?
by visually lining up the
adjacent walls or cabinets.
can
level the washer
Screw the A.L SPINDLE
1
plate
used
2
plates
used 3
plates used
4
plates
used
These fit under A.L SPINDLE if required
UP
DOWN
A.L SPINCLE
Introduci
12
BeforStaingWsh
U
Using
of Water,
se
Detergent,
Bleach and Softener
Water
Amount of WATER LEVEL
?
This machine detects the quantity of laundry
automatically,then sets the WATER LEVEL
and
proper amount of Detergent.
?
?
?
When you select
a
will be shown
the control
The
Water
?
?
wash program, the WATER LEVEL and amount of Detergent (to be used)
panel.
following table shows the amount of water.
When the WATER LEVEL is automatically detected, it may differ depending on the quantity
of laundry even though the same WATER LEVEL is indicated on the control panel.
on
Temperature
The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning results.
The machine sets the appropriate temperature automatically according to the wash program
.
?
You
can
change
the Water
Temperature by pressing the WATER TEMP. button.
(refer
to page
16)
We recommend temperatures of:
...(120-140 F) White items, diapers, underclothing and heavily soiled, colorfast items.
...(85-105 F) Most items
-COLD* 18~24°C ...(65-75 F) Only very bright colors with light soil.
When washing in COLD water additional steps may be needed:
-Adjust Detergent amount and pre-dissolve Detergent in WARM water
-HOT 49~60°C
-WARM 29~40°C
?
-Pretreat spots and stains
-Soak heavily soiled items
appropriate bleach
Temperature below 18 °C ...(65 F) will not activate laundry additives and may cause lint, residue, poor
cleaning, etc.
In addition, Detergent manufactures and care labels define COLD water as 26~29°C ...(80-85 F).
If the temperature of the water in the tub is too cold for your hands, the Detergent will not activate and clean
effectively.
-Use
*
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron
brown
filter may be necessary for
severe cases.
Using Detergent
Detergent
Follow the
Detergent package directions. Using too little Detergent is
a common cause
of laundry
problems.
Use
more
Detergent if you have hard water, large loads,greasy or oily soils
or
lower Water
Temperature.
Choosing the right Detergent
We recommend the
use of domestic Detergent, (powder, liquid or concentrated). Soap flakes or granulated
powders should not be used in your washing machine. When washing woolens remember to use
Detergent suitable for washing woolens.
soap
13
U
se
of Water,
Detergent,
Bleach and Softener
Using Detergent
How much
Detergent
When you select a wash program the WATER LEVEL and the amount of Detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated Detergent.
The correct amount of Detergent will vary depending on the amount of soil in your clothes
cloches may need more Detergent, while bath towels usually need less.).
(Jeans
and work
liquid and concentrated Detergents, follow the recommendations of the Detergent manufacturer.
Note : To check you are using the correct amount of Detergent, lift the lid of your machine about halfway through the wash. There should be a thin layer of foam over the surface of the water. Lots of
foam may look good, but it does not contribute to cleaning your clothes. No foam means not enough
Detergent has been used ; soil and lint can settle back on the clothes or the washing machine.
If excess Detergent is used, the rinse will not be as clean and efficient.Also, it could cause
environmental pollution, so use it accordingly.
For
Adding the Detergent
Open the Detergent dispenser and deposit the appropriate
Powder Detergent Box
amount of Detergent
()
where you deposit the Detergent
Powder Detergent dispenser.
Where you
Some Detergents MUST be fully dissolved before
deposit the
to
machine
to
the
best
wash
results.
Detergent
adding your
get
Check the instructions on the Detergent packet.
If you use powdered Detergent it is essential that the required amount be fully dissolved in very HOT water
before being added to WARM or HOT water for the actual wash.
Pre-dissolving Detergent in WARM water when washing in COLD water can improve its performance.
Using Liquid
?
?
?
?
Bleach
Check clothing care label for special
laundry to be bleached
Dilute liquid chlorine bleach.
instructions and separate the
Bleach
dispenser
()
Measure the recommended amount of liquid bleach
carefully
following instructions on the bottle.
Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
Attention
Never pour undiluted liquid bleach directly onto clothes
This may cause change of color or damage the laundry.
or
into the wash basket.
Do not mix chlorine bleach with ammonia
as
vinegar
reduce
or
acids such
toxic gas which may cause death.
Do not pour powdered bleach into bleach dispenser.
can
a
and/or rust
remover.
Mixing
BeforStaingWsh
14
BeforStaingWsh
U
of Water,
Detergent,
Bleach and Softener
Fabric Softener
Using
?
se
Dilute fabric softener with water.
Undiluted fabric softener may result in spots that look like oil
stains.
?
Softener
dispenser (
)
Measure and add the recommended amount of fabric softener
into the compartment marked with this
Follow manufacturer's direction.
Fabric softener is
symbol(
).
automatically dispensed in the final rinse
with indication beep.
If you want extra rinse, you must add fabric softener
manually when indication beep rings in the final rinse.
This
maximize the fabric softener function.
?
Do not overfill. The
dispenser hold max 35mL.
Never add more than 35mL.
Overfilling can cause early dispensing of the fabric
pouring spout will help you avoid spilling.
?
softener which could result in stained clothes. A cup with
a
The effect of adding fabric softener may vary according to its viscosity. If the softener is to thick, its effectiveness
a sticky fabric softener it is recommended that it be diluted with water, and then added
will be reduced. For
manually when the washer beeps several times before the final rinse. This function of advising the correct time to
dispense manually is optionally applied to some models. Please keep it in mind that fabric softener has to be
diluted with water before dispensed and never poured directly on clothes.
Attention
Do not mix with
Detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin. This will cause the dispencing time to be incorrect.
Option washing
is not
designed to
be used with fabric softener
dispenser.
15
S
pecial Guide for Stain Removal
WARNING
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of children's reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning
solvents or other flammable or explosive substances because they give off vapors that could ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or
sparks.
?
?
?
?
?
?
For successful stain removal:
?
?
?
Remove stains
promptly.
Determine the kind of stain, then follow the recommended treatment in the stain removal chart below.
To pretreat
stains,
use a
prewash product, liquid Detergent,
or a
paste made fromgranular Detergent and
water.
?
?
?
?
Use COLD water
on
unknown stains because HOT water
Check care label instructions for treatments to avoid on
Check for colorfastness
can
set stains.
specific fabrics.
by testing stain remover on an inside seam.
Rinse and wash items after stain removal.
Stain Removal
STAIN
Adhesive tape,
rubber cement
chewing gum,
Baby formula, dairy products, egg
Beverages(coffee, tea, soda,
juice, alcoholic beverages)
TREATMENT
Apply ice. Scrape off excess. Place stain face down on paper towels.
dry cleaning fluid.
Saturate with prewash stain remover or nonflammable
product containing enzymes to pretreat or soak stains.
Use
Pretreat stain. Wash using COLD water and bleach safe for fabric.
Blood
Rinse with COLD water. Rub with bar soap. Or pretreat or soak with product
fabric.
Candle wax, crayon
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Chocolate
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Collar or cuff soil, cosmetics
Pretreat with prewash stain remover
Dye transfer on white fabric
Use
Grass
Pretreat
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Scrape residue from fabric. Pretreat.Wash using hottest water safe for fabric. For heavy stains and tar, apply nonflammable
dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash using hottest water safe for
or
containing enzymes. Wash using bleach safe for
rub with bar soap.
packaged color remover. Wash using bleach safe for fabric.
or
soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
fabric.
Ink
Some inks may be impossible to remove. Washing may set some inks. Use
alcohol or nonflammable dry cleaning fluid.
Mildew,scorch
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before washing.
fabrics may be permanently damaged.
Mud
Brush off dry mud. Pretreat or soak with product containing enzymes.
Mustard,
Nail
tomato
polish
prewash stain remover, denatured
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
Paint, varnish
WATER BASED : Rinse fabric in cool water while stain is wet. Wash.Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
Rust, brown or yellow
For spots.
discoloration
not
Shoe polish
Badly mildewed
use
use rust remover safe for fabric. For discoloration of an entire
chlorine bleach because it may intensify discoloration.
load, use phosphate Detergent and nonchlorine bleach. Do
: Pretreat with a paste of granular Detergent and water. PASTE : Scrape residue from fabric. Pretreat with prewash
stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash using bleach safe for fabric.
LIQUID
BeforStaingWsh
16
BeforStaingWsh
F
unction of each Button
BUTTON
Use to select Water
Pressing
(INDICATION
Temperature.
the button allows you to
select WARM
COLD
(HOT&COLD)
HOT
WARM
respectively.
Default
Use to
adjust the WATER LEVEL as required.
appropriate amount of Detergent is shown
Time left -During
time is indicated.
DELAY START INDICATION
DETERGENT
(RESERVATION)-When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
diagram
LEVEL is automatically selected for
The
is
following settings are indicated as the button
pushed LARGE LARGE EX-LARGE
.
EX-LARGE
MEDIUM
SMALL
SMALL.MEDIUM
MEDIUM.LARGE
LARGE
Alarm indication When
-
(RESERVATION)
This button allows you to select the
strength of the water current.
option
sequence
STRONG
as
the button is
selections
light up
Use to set
GENTLE
This
in
NORMAL
can
delayed finishing
time..
pushed.
following settings are indicated as
the button is pushed 3
4
5
...11
The
as
be
selected for any program, but when
washing jeans, it starts with STRONG.
Adjustment can be made while
washing. (* Default stain in NORMAL)
121416...46483
HOUR.
To cancel
switch off.
delay time,,turn the
(refer to page 24)
occurs,
WASH.RINSE.SPIN
BUTTON
The time increases when the button is
follows NORMAL
pushed.
a
an error
message appears to indicate the
indicates
abnormality. For example,
that the lid is open.
an error
DELAY START
STAIN LEVEL BUTTON
Power
operation,the remaining
next to the WATER LEVEL in the WATER-
NORMAL program.
is WARM.
LEFT, DELAY START
(RESERVATION), ALARM INDICATION
OF DETERGENT AMOUNT)
The
WATER
setting
TIME
WATER LEVEL BUTTON
WATER TEMPERATURE
power
BUTTON
Use when
wash,rinse,spin
adjusted.
time need to be
The time increases when the
button is
pressed
adjustments are needed
during the wash, press the
[START/PAUSE] button
before making any changes.
When the button is pressed
during washing, the
remaining time is displayed.
.
If
Note
*
*
*
washing algorithm, the displaying time may be changed during washing-increased by 8 minutes at
maximum and decreased by 4 minutes at maximum.
If the Detergent quantity is put more than the standard, for increasing the rinsing performance,it automatically adds
rinsing, and the remaining time may be increased.
The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to the
washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
For
optimizing
the
18
W
WashingProm
ashing Programs
Add the
Washing Programs
NORMAL Wash
Add
the
laundry
1
2
4
Used for normal loads, this mode
automatically selects the most
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
detects the size of the load and
the ideal wash power and wash,
rinse,temperature and spin
times are set accordingly.
SPEEDY Wash
Use this mode when
Add the
appropriate
of Detergent as
indicated by the WATER
quantity
LEVEL next to WATER
DETERGENT.
Or follow the Detergent
manufacturer's
instructions
1
3
2
washing
lightly soiled clothes for
short time. The highly
recommended laundry
amount is under 2.0kg.
Detergent
a
5
Select the
Add the
SPEEDY
quantity
on
program
the Control
panel.
appropriate
of Detergent as
indicated by the WATER
LEVEL next to WATER
DETERGENT.
Or follow the Detergent
manufacturer's
instructions
HEAVY Wash
1
Use Jean program when
of different
3
2
Select the
Spread
washing Jeans
the jean
sizes
evenly
the tub
5
in
HEAVY
program
on
the Control
panel.
WOOL Wash
1
3
Use this program for washing
delicate fabrics such as
lingerie and woolens. (wash
only "water washable"
clothes) Before washing your
woolens check the care label
for the washing instructions.
(wash only water washable
clothes) The highly
recommended laundry
amount is under 1.5kg.
DELICATE Wash
2
5
Select the
Use neutral
WOOL
appropriate for the laundry.
program
on
the Control
panel.
1
3
2
Select the
blouses, nylons and dress shirts
program
DELICATE
on
the Control
panel.
When washing woolens use
a mild Detergent
recommend- ed for washing
wool.
5
Use this program to wash items
requiring a GENTLE WASH
action. This would include
with light soiled. The highly
recommended laundry amount
is under 2.0kg.
Detergent
19
3
Caution & Note
Finish
Close the lid
6
5
?
?
The
pulsator
rotates
for 15 seconds to
detect the laundry
?
load.
Then the WATER
LEVEL and the amount
of Detergent to be
used will be shown
and water will be
?
Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
the laundry
water
has absorbed.
?
When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
If water is
putting
before
already in the tub, or
laundry into the tub
wet
starting will
increase the
WATER LEVEL.
?
With
lightweight bulky loads,
LEVEL
?
automatically.
can
Changes to
WATER
be set low.
Water
Temperature
(HOT/COLD) and wash level
are
possible during operation.
(refer
to page
16)
When
setting the WATER
supplied.
4
6
7
4
6
7
4
6
7
?
?
?
contain
?
4
6
7
?
LEVEL
manually, do not set to Medium to
prevent damage to laundry.
Washing with HOT water may damage
the laundry. Ensure that the load is
under 1.5kg.
In order to avoid damage to laundry, the
spin cycle may appear slow. This also
avoids wrinkles and clothing may still
some
water.
This is normal.
Before starting to wash, make sure that
the laundry is washable.
Washing with HOT water may damage
the laundry.
WashingProm
20
S
WashingProm
OAK Wash
Use this mode to wash normal clothes
SOAK mode
can
or
be used with NORMAL
thick and
or
1
Press the AUTO OFF
2
Press the PROGRAM button to select the
(POWER) button
?
heavy clothes which
are
excessively dirty.
HEAVY program.
to turn power on.
washing
program.
SOAK will not work in WOOL and
SPEEDY, DELICATE
Porgram.
3
Keep pressing the
PROCESS
(WASH, RINSE, SPIN) button
until the SOAK
lights
light is on and then WASH, RINSE, SPIN
simultaneously.
washing process is completed, the SOAK light is
are on
Until the
WASH
4
5
Add the
Add the
Detergent.
laundry
RINSE
?
The
on.
SPIN
appropriate quantity of Detergent marked next to
and press the START/PAUSE button.
?
The WATER LEVEL and the amount of Detergent to be
used will be shown and water will be
6
Close the lid.
?
supplied.
Water will be
wash to
Finish
the
WATER LEVEL of WATER-DETERGENT.
supplied for 2 minutes after the start of the
supplement the absorbed water by the laundry.
When the wash program ends,the buzzer will ring for
10seconds before the Power goes off automatically.
22
S
WashingProm
1
ILENT Wash
Use this program to wash
Press the AUTO OFF
quietly
in SILENT
(POWER) button
especially during
late
Press the PROGRAM button to select SILENT program.
3
Add the
4
Press the START/PAUSE button.
5
Add the
into the
dawn.
to turn power on.
2
laundry
night and
washing tub.
Detergent and close the lid.
Note
?
?
SILENT program takes
longer washing
time than NORMAL program.
To reduce noise in spinning,spin rpm is lower than normal
moisture than normal.
spinning rpm.
So the
laundry has more
24
D
AditonalFucPrgm
ELAY START
DELAY START
Wash
(RESERVATION)
(RESERVATIO N) W ash is used
to
delay
the
finishing
time of the
operation. The hours to be delayed can be set by the user ac cordingly.
The time on the display is the finishing time not the start time.
,
1
2
Press the POWER button to turn pow er
Press the PROGRAM button to select the
?
Press the DELAY START
delayed washing
?
is to be
How to set the
Example
:
program.
Program.
(RESERVATION)
c ompleted.
delay
It 's 7
washing
Select the program for laundry on the Control panel.
This program will not work in WOOL, DELICATE and
ECOSAVE
3
on.
button to set the time when the
time.
a.m.now.
If
you'd
like your wash to
as in the figure
finish at 9 p.m.set the time
below.
When you push the button the reservation time changes
48
[3 4 5 ...12 14 16
3] repeatedly.
(RES. =D ELAY)
...
4
Add the D etergent.
?
The
appropriate quantity
of
?
5
6
Add the
laundry
Close the lid.
?
DETERGENT.
When the lid is open the machine will not operate, and
signal will remind you to close the lid
an
alarm
and press the START/PAUSE button.
?
When you press the START/PAUSE button the
supplement the water the laundry has absorbed.
?
Water will be
supplement
The
Finish
marked next to the
Detergent
WATER LEVEL of WATER
washing
supplied
light
will whas to
for 2 minutes after the start of the wash to
the water the
laundry has
will be finished
absorbed.
according
to the
delayed
time.
Note
?
?
?
If the lid is
open,the machine will not work, and an alarm signal will alarm to remind you to close the lid.
washing program,spinning time, WATER LEVEL or HOT/COLD manually, press the DELAY
START (RESERVATION) button and select the desired option. Then press the START/PAUSE button.
When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the
spinning program (The laundry will be wrinkled if left for a long time after spinning.)
To select
.
25
O
ption Washing
When you
only
need the Wash, Wash/Rinse
or
Rinse
cycles,
these
can
be set
By pressing
manually
button
Select water
levels Add
detergent.
1
Wash
only
2
3
4
Select
Close the lid
WASH
Press
time.
Start/Pause
button.
15
18202540 (Soak)
50 (Soak)
60 (Soak)
141063OFF
Add
detergent
by display the
the digit.
1
Rinse
2
3
Close the lid
Select No.
1
2 time
time
Start/Pause
Spin
only
2
Select
3
Close the lid
SPIN time.
4
Press
Start/Pause
button.
1
2
Select
Rinse
Spin
only
5 time
4 time
OFF
button.
1
3 time
Press
of RINSE
only
4
3
4
Close the lid
No. of
Press
RINSE and
Start/Pause
SPIN itme.
button.
4 min
5 min
6 min
7 min
OFF
1 min
2 min
3 min
AditonalFucPrgm
26
AditonalFucPrgm
ther Useful Functions
O
Child Lock Function
If you want to lock all the
child lock
keys to prevent settings
from
being changed by a child,
you
can use
the
option.
How to Lock
1
Press the POWER button.
?
2
on.
Press the START/PAUSE button to start
?
3
Turn Power
After all
washing
washing.
conditions
are
Press both the RINSE button and the SPIN button
set
according
to the manual.
simultaneously.
During the wash program, all the buttons are locked until washing
is completed or until the child-lock function is deactivated
manually.
?"
and the remaining time will be displayed alternately in
?
"
child-lock mode.
How to Unlock
If you want to unlock
Mute
during wash,
press both the RINSE and the SPIN button
simultaneously again.
Option
If you want to
buttons
washing machine without
simultaneously.
use
To make buzzer
the
work,
Seeing Remaining
To
signal sounds,
press both the WASH and SPIN buttons
press both the WASH and SPIN
simultaneously one more time.
Time
the remaining time for each process,press one of the WASH, RINSE
remaining time for each process will appear for about 1 second.
see
The
alarm
and SPIN buttons.
27
M
aintenance
CLEAN THE FILTER IN THE VALVE
1
Disconnect the power cord
2
Pull out the filter from the
inlet valve.
3
Use
dirt.
tooth brush to get rid of
Replace it.
a
CLEAN THE LINT FILTER
1
Pull out the waste thread
collection net from the tub
in the direction of the
2
Turn inside out to
rid of filth.
get
3
Insert it into the
original
location.
arrow
below.
CLEAN THE CABINET
Wipe
with
stains from the cabinet and the control
a
panel
CAUTION
soft cloth.
Do not pour water directly on the cabinet.
Do not wipe the cabinet with benzine, thinner,
cleanser, alkaline detergent
Do not rub the cabinet with
When you use
instructions.
a
or wax.
a
scrubbing brush.
chemical dustcloth, follow the
Mainte c
28
Wash Inner-tub
Leave the lid open after
the inner-tub
not
use
harsh
Long Vacations
Be
?
?
?
supply
freezing.
surface with
is shut off at faucets. Drain all water from hoses if weather will
Inside of your Washer
use fabric softener
inside of your washer.
?
gritty cleaners.)
water
sure
be below
?
allow moisture to evaporate. If you want to clean
then rinse. (Do
dampened with liquid Detergent,
Hoses
Exterior
If you
or
washing to
clean soft cloth
connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit
sharp objects.
Inlet Hoses
Cleaning the
use a
do
or
regular
COLD water
washing,
it is very
important that you occasionally clean the
Fill your washer with HOT water.
Add about two cups of a powdered
Let it operate for several minutes.
Stop
Detergent that contains phosphate.
the washer, open the lid and leave it to soak overnight.
soaking, drain the washer and run it through a normal
After
Or
use
TUB CLEAN PROGRAM
cycle.
periodically.
during this procedure.
We do not recommend that you wash clothes
Products that
?
?
?
?
might damage
Concentrated bleaches and
your
diaper
washing
sanitizer will
damage to the paintwork and components
of your washer.
Hydrocarbon solvents i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and blister paint
(Be careful when washing garments stained with these solvents as they are flammable DO NOT put them in
washer or dryer.)
Some pretreatment sprays
or
liquids
can
damage your washer's
control
panel.
Use of dyes in your washer may cause staining of the plastic components. The dye will not damage the machine
but we suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in
your washer.
?
machine
cause
Do not
use
your washer lid
as a
work surface.
29
T
roubleshooting
Before
calling
Symptom
Water
Supply
Failure
for service, check the
Error
problem against the
list bellows.
Check up
Message
?
Is the water
?
Is the water
?
Is the
?
tap shut off?
supply cut off ?
tap or water supply hose
Is the water pressure low
with impurities?
or
frozen ?
is the filter of the inlet valve
clogged
?
Is the Hot hose connected to cold?
?
Is the Cold hose connected to hot?
Drainage
?
Is the drain hose
Failure
?
?
?
Spin Failure
Door(Lid)
positioned correctly?
or placed too high?
Is the internal part of the hose or drain pump
(only pump model) clogged with impurities?
Is the drain hose bent
Check if electric power has gone off.
?
Is the
laundry evenly
?
Is the
washing
?
Is the lid closed?
balanced?
machine
placed
on a
flat surface?
Open
Internal
sensing
failure
Power failure
Overflow
failure
?
Please call your nearest LG Electronics service center
for help.
Troubleshting
30
S
pecification
Specifaton
Inlet water pressure
550 kpa (80 psi)
max
min 30
kpa (4 psi)
M90-12m Standpie inmuhegtofaps clrhetofmain
150m
t
r
o
f
g
H
in
w
o
ll
A
e
e
f
e
l
b
a
t
s
u
j
d
a
Electricity supply
240V
50 Hz sinusoidal
D
W
Model
WT-H555TH
Type
automatic washer
Fully
Washing capacity
Electrical
5.5kg
See the
ratings
rating plate
attached to the
rear
of the washer
Standard amount of water
Approx.
(EX-LARGE
water
Automatic
Washing system
Water tap pressure
Outer dimension
Weight
113
level)
(WxDxH)
30 -550
pulsator type
reverse
kpa(0.3
-
8kgf
/cm 2 )
540(W)X540(D)X910(H)mm
33
kg
Specifaton
Inlet water pressure
550 kpa (80 psi)
max
min 30
kpa (4 psi)
M90-12m Standpie inmuhegtofaps clrhetofmain
150m
t
r
fo
H
e
e
f
g
le
n
b
i
w
o
ll
A
ta
s
u
j
d
a
Electricity supply
240V
50 Hz sinusoidal
D
W
Model
WT-H755TH
Type
automatic washer
Fully
Washing capacity
Electrical
7.5kg
See the
ratings
rating plate
attached to the
rear
of the washer
Standard amount of water
Approx.
(EX-LARGE
water
Automatic
Washing system
Water tap pressure
Outer dimension
Weight
169
level)
(WxDxH)
30 -550
pulsator type
reverse
kpa(0.3
-
8kgf
/cm 2 )
590(W)X606(D)X958(H)mm
41
kg
P/No.:3828EY3080A
Download PDF

advertising