LG | WTP20WX | LG WTP20WX Owner’s Manual

LG(66) 설계 042 A3 (95.02.01) REV_1
RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
MFL68881061
Work
WORK
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
SEC.
61
가
BRAND
나
P/No.
PRINTING DEGREE
LG
SIGNATURE
MFL68881061
1
<FRONT>
MATERIAL AND PRINTING DESCRIPTION
LANGUAGE
PAGE
PRODUCT
외지: 아트지 150g OFFSET 인쇄
내지: 모조지 80g OFFSET 인쇄
English
44
W-MODULE
REMARK
LG SIGNATURE 24인치
양산처 : 국제인쇄
<BACK>
작업 주기
1. 재질 : 작업표에 준함.
2. 인쇄방법 : 작업표에 준함.
3. 인쇄 내용, 문자의 크기, 선의 굵기 및 형상 등은 주어진 도면에 준한다.
4. 외곽 치수는 절단 후 치수임.
5. 양산 전 설계 한도를 득할 것.
210
6. 본 부품에 금지 물질이 포함되지 않도록 하고, 상세 내용은 LG(63)-A-5501-34를 만족할 것.
WORK SPECIFICATIONS
1. Material should be refer to work table.
2. Printing method should be refer to work table.
3. Printing contents, the size of text and font follow the LG Drawing.
4. There is the external dimension after cutting size.
5. Before product controlled by criteria sample.
148
148
6. Standard of supervision for hazardous material
The part should not contain prohibited substances and details should comply with LG standard of LG(63)-A-5501-34
PDF
ILLUSTRATOR
4
TRIG.
UNIT
mm SCALE N S
DESIGNED REVIEWED CHECKED APPROVED
3
2
1
REV. NO.
기호
단가 등록 위한 가도면 이후 매뉴얼 등록.
REVISION DESCRIPTION
변경 사항
EAGH300755 17.04.01 이승현 김영수
REF. NO.
시방 번호
DATE
년/월/일
PREPARED APPROVED
시방자
승인자
김은지
17.02.20
최차림
17.02.20
LG 전자
(주)
LG Electronics Inc.
이승현
17.02.20
김영수
17.02.20
RELATED DWG.
T
I
T
L
E
DWG.
No.
DR COMPLETED
도면 DR 완료
완료일 :
Manual, Quick Guide
W-MODULE 1/1
MFL68881061
OWNER'S MANUAL
MINI WASHER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that
the product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
WTP20WX
MFL68881061
www.LGSIGNATURE.com
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS
This manual may contain images or
content different from the model you
purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS........................................................4
IMPORTANT SAFETY INSTRUCTIONS..................................................... 4
INSTALLATION.......................................................................10
Parts.......................................................................................................... 10
Accessories............................................................................................... 11
Specifications............................................................................................ 11
Installation Place Requirements................................................................ 12
Stacking Mini Washer................................................................................ 13
Connecting the Supply Hose..................................................................... 15
Installing the Drain Hose........................................................................... 17
Leveling the Appliance............................................................................... 18
OPERATION............................................................................19
Using the Application................................................................................. 19
Sorting Laundry......................................................................................... 20
Using the Door and Drawer....................................................................... 21
Adding Cleaning Products......................................................................... 22
Control Panel............................................................................................. 24
Programme Table...................................................................................... 26
Option Programme.................................................................................... 27
SMART FUNCTIONS..............................................................28
Using the Smart Diagnosis™ Function...................................................... 28
MAINTENANCE.......................................................................29
Cleaning the Washing Machine................................................................. 29
Cleaning the Drum..................................................................................... 30
Cleaning the Water Inlet Filter................................................................... 30
Cleaning the Lint Filter............................................................................... 31
Caution on Freezing During Winter........................................................... 31
TROUBLESHOOTING............................................................33
Diagnosing Problems................................................................................ 33
Error Messages......................................................................................... 37
Rev.00_032917
SAFETY INSTRUCTIONS
EN
The following safety guidelines are intended to prevent
unforeseen risks or damage from unsafe or incorrect operation
of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’
as described below.
This symbol is displayed to indicate matters and
operations that can cause risk. Read the part with this
symbol carefully and follow the instructions in order to
avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, fire, death, electric shock,
injury or scalding to persons when using this product, follow
basic precautions, including the following:
Children in the Household
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.
4
EN
Installation
•Never
•
attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken
parts, including a damaged cord or plug.
•This
•
appliance should only be installed and transported by two or
more people holding the appliance securely.
•Do
• not install the appliance in a damp and dusty place. Do not
install or store the appliance in any outdoor area, or any area that
is subject to weathering conditions such as direct sunlight, wind, or
rain or temperatures below freezing.
•Tighten
•
the drain hose at connecting ends to avoid separation.
5
EN
•If
• the power cord is damaged or the hole of the socket outlet is
loose, do not use the power cord and contact an authorized service
centre.
•This
•
appliance must not be installed behind a lockable door, a
sliding door or a door with a hinge on the opposite side to that of
the appliance, in such a way that a full opening of the appliance
door is restricted.
•This
•
appliance must be grounded (earthed via the power cord).
In the event of malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least resistance for
electric current.
•This
•
appliance is equipped with a power cord having an equipmentgrounding conductor (earthing pin) and a grounding power plug.
The power plug must be plugged into an appropriate socket outlet
that is installed and grounded in accordance with all local codes
and ordinances.
•Improper
•
connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or
service personnel if you are in doubt as to whether the appliance is
properly grounded.
•Do
• not modify the power plug provided with the appliance. If it
does not fit the outlet, have a proper outlet installed by a qualified
electrician.
6
EN
Operation
•Do
• not use a sharp object like drill or pin to penetrate, modify or
disassemble the unit.
•Do
• not repair or replace any part of the appliance. All repairs
and servicing must be performed by qualified service personnel
unless specifically recommended in this Owner’s Manual. Use only
authorized factory parts.
•Use
•
a new hose or hose-set supplied with the appliance. Reusing
old hoses can cause a water leak and subsequent property
damage.
•Do
• not reach into the appliance if the tub or agitator is moving.
•Keep
•
the area underneath and around the appliance free of
combustible materials such as lint, paper, rags, chemicals, etc.
•Do
• not put animals, such as pets into the appliance.
•Do
• not leave the appliance door open. Children may hang on the
door or crawl inside the appliance, causing damage or injury.
•Never
•
reach into the appliance while it is operating. Wait until the
drum has completely stopped.
•Do
• not put in, wash or dry articles that have been cleaned in,
washed in, soaked in, or spotted with combustible or explosive
substances (such as wax, oil, paint, gasoline, degreasers,
drycleaning solvents, kerosene, vegetable oil, cooking oil, etc.).
Improper use can cause a fire or explosion.
•In
• case of flood, disconnect the power plug and contact the LG
Electronics customer information centre.
•Do
• not push down the drawer excessively, when the appliance
drawer is open.
7
EN
•Do
• not use flammable gas and combustible substances (benzene,
gasoline, thinner, petroleum, alcohol, etc.) near the appliance.
•If
• the drain hose or inlet hose is frozen during winter, use it only
after thawing.
•Keep
•
all washing detergents, softener and bleach away from
children.
•Do
• not touch the power plug or the appliance controls with wet
hands.
•When
•
pulling out the power plug from an outlet, hold the power
plug, not the cable.
•Do
• not bend the power cable excessively or place a heavy object
on it.
•If
• there is a gas leakage (isobutane, propane, natural gas, etc.),
do not touch the appliance or power plug and ventilate the area
immediately.
•Do
• not install the Mini Washer on top of another Mini Washer or
Pedestal or elevated surface or stand.
•To
• avoid breaking the door glass, do not push too hard on the door
when closing.
•Do
• not step on Mini Washer.
•The
•
Mini Washer is designed to wash lightly soiled and delicate
items and should not be used to wash normally soiled clothes or
other items such as sheets, towels rugs, denim and pet blankets.
•This
•
appliance must only be used for domestic household purposes
and should not be used in mobile applications.
•Do
• not open or close the door by foot.
8
EN
Maintenance
•Securely
•
plug the power plug in the socket outlet after completely
removing any moisture and dust.
•Disconnect
•
the power cord before cleaning the appliance.
•Never
•
unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the socket
outlet.
•Do
• not spray water inside or outside the appliance to clean it.
Disposal
•Before
•
discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse.
•Dispose
•
of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can cause
suffocation.
•Remove
•
the door before disposing of or discarding this appliance to
avoid the danger of children or small animals getting trapped inside.
9
INSTALLATION
EN
Parts
6
7
3
1
2
4
5
11
10
9
8
1 Door
7 Power Plug
2 Drum
8 Water Drain Hose
3 Stacking Switch
9 Leveling Feet
4 Control Panel
10 Unlock Button
5 Drawer
11 Remote Sensor
6 Water Supply Hose
10
EN
Accessories
Water supply hose
(for cold water)
Connecting
supply hose
Water drain hose
Water supply hose
connector
Water drain hose
connector
Anti-slip sheets
(2 EA)
Detergent
measuring
cup
Brackets (front)
(2 EA)
Brackets (back)
(2 EA)
Spanner
* Screws
Type A (37 EA)
Type B (5 EA)
Type C (3 EA)
Cable ties
(2 EA)
Band clamps
(3 EA)
Stacking holder
Remote control
* Type A : long sheet metal screw, Type B : short sheet metal screw, Type C : machine screw
NOTE
••Different accessories may apply to each model.
••The stacking holder is for preventing independent operation.
••Depending on the installation environment, you may have to purchase a separate drain hose
connector. The connector supplied will suit a standard laundry drum side drain hole.
••In addition to the screws required for installation, some extra screws have been provided.
Specifications
Power supply
Size
Product weight
Permissible water pressure
Wash capacity
220 - 240 V~, 50 Hz
600 mm (W) X 660 mm (D) X 365 mm(H)
43 kg
0.1 - 0.8 Mpa (1.0 - 8.0 kgf / cm²)
2 kg
••Appearance and specifications may change without notice to improve the quality of the product.
11
EN
Installation Place Requirements
Location
135 cm
123 cm
0.5 cm
125 cm
2 cm
110 cm
*125 cm
10 cm
5 cm
60 cm
5 cm
*125 cm: minimum space for installation
Level floor : Allowable slope under the entire
appliance is 1°.
Power outlet : Must be within 1.5 meters of
either side of the location of the appliance.
Additional Clearance : 5 cm at the sides and 10
cm behind the unit.
••Do not place or store laundry products on top
of the appliance at any time. These products
may damage the finish or controls.
WARNING
••The plug must be plugged into an appropriate
outlet that is properly installed and grounded
in accordance with all local codes and
ordinances.
Positioning
••Install the appliance on a flat hard floor. Then,
level the Mini Washer before placing the Main
washer on top. Lock only the rear feet of the
Mini washer after leveling as the two front feet
may need readjusting after the Main Washer
has been placed on top.
••Make sure that air circulation around the
appliance is not impeded by carpets, rugs, etc.
••Never try to correct any unevenness in the
floor with pieces of wood, cardboard or similar
materials under the appliance.
••If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (85x60 cm) covered with
aluminum foil on the side facing the cooker
or stove must be inserted between the two
appliances.
12
••Do not install the appliance in rooms where
freezing temperatures may occur. Frozen
hoses may burst under pressure. The reliability
of the electronic control unit may be impaired
at temperatures below freezing point.
••Ensure that when the appliance is installed, it
is easily accessible for an engineer in the event
of a breakdown.
••With the appliance installed, adjust all four
feet using a transit bolt spanner to ensure
the appliance is stable, and a clearance of
approximately 5 mm is left between the top of
the appliance and the underside of any worktop.
••If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
••Do not use a drip pan as it can block the
drawer. Using the drip pan may result in
increased vibration and noise during operation.
WARNING
••This appliance is not designed for maritime
use or for use in mobile installations such as
caravans, aircraft etc.
Electrical Connection
••Do not use an extension cord or double
adapter.
••Always unplug the appliance and turn off the
water supply after use.
••Connect the appliance to an earthed socket in
accordance with current wiring regulations.
••The appliance must be positioned so that the
plug is easily accessible.
••Repairs to the appliance must only be carried
out by qualified personnel. Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your localan
authorised LG repairer.
EN
Stacking Mini Washer
2
Stacking holder
Brackets (front)
Assemble the front brackets and stacking
holder at the bottom of Main Washer.
••First assemble the stacking holder using
2 type A screws included in the accessory
box, then each bracket using 7 type A
screws included in the accessory box.
2
Brackets (back)
1
Brackets (front) Brackets (back) Stacking holder
3
NOTE
••The
error message appears on the
display, if the stacking holder is not attached to
the bottom of the Main Washer.
1
Tilt and hold Main Washer.
3
Pull and save the foam block for future use.
If Mini Washer must be moved in the future,
the foam block will help prevent damage to
Mini Washer during transportation.
NOTE
••To prevent damage, do not remove the
foam block until Mini Washer is at the final
location.
13
EN
4
Rotate the top cover 180 degrees.
Cover the upper hole with the top cover and
install 4 type B screws to fix it in place.
7
Securely attach the two appliances at the
corners using 14 type A screws.
••First, insert screws on each side. Then
insert screws on the front and back side.
NOTE
••It can be difficult to assemble if it is not
assembled in the proper order, or if the
Mini washer has not been leveled prior to
placing the Main washer on top.
••Use two type C screws to assemble the
stacking holder.
5
Attach the two back brackets on the rear
top of the Mini Washer by inserting 4 type A
screws in each bracket.
Stacking holder
8
6
1
1
2
3
Turn the feet of the Main Washer slightly
until they are firmly snug up against the Mini
Washer.
Carefully place the Main Washer on top of
Mini Washer.
••Make sure the 4 legs are totally wound in
and the holes of Mini Washer align with the
holes of Main Washer.
NOTE
••Mini Washer will not work as a standalone unit.
Washer leg
Washer leg
14
EN
Connecting the Supply Hose
••Water supply pressure must be between 0.1
MPa and 0.8 MPa (100 ~ 800kPa).
••Do not overtighten the water supply hose.
••If the water supply pressure is more than
0.8 MPa, a decompression device should be
installed.
••Periodically check the condition of the hose
and replace the hose if necessary.
••Contact the service centre if there is no rubber
seal fitted to the hose ends.
Connecting Hose to Water Tap
Connecting Screw-Type Hose to Tap
with Thread
Screw the hose connector onto the water supply
tap.
Checking the Rubber Seal on the
Supply Hose
Two rubber seals are supplied with the water
supply hoses. They are used for preventing
water leaks. Make sure the connection to taps is
sufficiently tight. Do not use mechanical devices
such as multi grips to tighten the inlet hoses.
Hose connector
Rubber seal
Hose connector
Rubber seal
15
EN
Connecting the Cold Supply
Hoses to Both Washing Machines
1
Connect one end of the cold water supply
hose connector to the cold water supply
hose of the Main Washer first. Open the
accessory package for the Mini Washer
installation accesories.
3
Connect the additionally provided water
supply hose of Main Washer to the cold
water supply hose connector and cold water
tap.
Water supply hose
connector
Water supply hose
connector
2
16
NOTE
Connect the water supply hose of Mini
Washer to the cold water supply hose
connector.
••Make sure the water supply hoses are not
kinked or pinched.
EN
Installing the Drain Hose
Using the Drain Hose Connector
••The drain hose should not be placed higher
than 100 cm above the floor. Water in the
appliance may not drain or may drain slowly.
1
Connect the drain hose of Main Washer and
Mini Washer to the drain connector.
2
Insert the included band clamps on to the
ends of the two drain hoses.
3
Push the drain hoses firmly onto the drain
connector.
1
Insert the band clamp onto the drain hose
elbow. Pliers may be required to open the
clamp so it can be fitted to the rubber end of
the hose.
Band clamp
2
With the hose leading up from the elbow,
firmly insert the elbow onto the drain outlet
on the back of Mini Washer.
Drain hose
connector
CAUTION
3
Adjust the band clamp with pliers to keep the
hose securely in place and prevent leaking.
••Adjust the band clamps to prevent the hoses
from coming loose or leaking. Failure to do
so could result in flooding. Use of the drain
connector helps avoid siphoning, odors, or
improper draining.
••Make sure the drain hose is not kinked or
pinched. This is a potential cause of drainage
problems or noise.
NOTE
••Depending on the installation environment, you
may have to purchase a separate drain hose
connector. The connector supplied will suit a
standard laundry drum side drain hole.
Band clamp
17
EN
Leveling the Appliance
Using Anti-Slip Sheets (Optional)
If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc. under
the feet). Make sure that all four feet are stable
and resting on the floor and then check that the
appliance is perfectly level (Use a spirit level).
••Once the appliance is level, tighten the lock
nuts up towards the base of the appliance. All
lock nuts must be tightened.
If you install the appliance on a slippery surface,
it may move because of excessive vibration.
Incorrect leveling may cause malfunction
through noise and vibration. If this occurs, install
the anti-slip sheets under the leveling feet and
adjust the level.
Raise
1
Clean the floor to attach the anti-slip sheets.
••Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
Lower
2
Adjust the level after placing the appliance in
the installation area.
Tighten all 4
lock nuts securely
3
Place the adhesive side of the anti-slip
sheets on the floor.
••It is most effective to install the anti-slip
sheets under the front feet. If it is difficult to
place the pads under the front feet, place
them under the back feet.
Lock nut
Diagonal Check
••When pushing down on the edges of the top
plate diagonally, the appliance should not move
up and down at all (check both directions). If
the appliance rocks when pushing the machine
top plate diagonally, adjust the necessary foot
or feet again.
This side up
Adhesive side
WARNING
••After stacking the Main Washer on to the Mini
Washer, use the leveling feet on Mini Washer
to level both. Main Washer´s leveling feet
should be already be firmly snug against the
Mini Washer and the locknuts turned counterclockwise to secure them.
NOTE
••Timber or suspended type flooring will
contribute to excessive vibration and
unbalance. Re enforcement or bracing of the
timber floor may need to be considered to stop
or reduce excessive noise and vibration.
4
Ensure the appliance is level.
••Push or rock the top edges of the
appliance gently to make sure that the
appliance does not rock. If the appliance
rocks, level the appliance again.
NOTE
••You can obtain anti-slip sheets from an LG
Service Centre or a Hardware store.
18
OPERATION
Using the Application
1
Sort laundry and load items.
••Sort laundry by fabric type, soil level,
colour and load size as needed. Open the
door and load items into Mini Washer.
2
Add cleaning products.
••Add the proper amount of detergent
with the detergent measuring cup to the
washing drum evenly.
3
Close the door and drawer.
4
Turn on Main Washer.
••Press the Power button to turn on the Main
Washer. On the Mini Washer's initial use, it
will need to be 'Paired' to the Main washer
so that the Mini Washer can be controlled
from the Main Washer's control panel.
EN
5
Select Mini Washer on the quick circle
display of Main Washer, then Choose the
desired washing programme.
••The options are selected by default
functions automatically. When you want
to change the options, press the options
button.
6
Begin cycle.
••Press the Start/Pause button to begin the
cycle. The Mini Washer will agitate briefly
without water to measure the weight of the
load.
7
Add softener.
••When the Mini Washer is ready for the
softener to be added (it can only be added
manually) it will sound a chime melody.
Press the Start/Pause button or Unlock
button on the right side in Mini Washer.
••The fabric softener can be added within 30
seconds after the chime has sounded.
••Open the drawer and door and add the
softener.
••Close the door and drawer and press the
Start/Pause button to start the appliance
again.
8
End of cycle.
••When the cycle is finished, another
melody will sound. Immediately reduce
your clothing from Mini Washer to remove
wrinkling and odors.
••After washing is complete, wipe off Mini
Washer door, gasket and inside the
washing drum with a soft dry towel for
clean washing.
19
EN
Sorting Laundry
1
3
Look for the care label on your clothes.
••This will tell you about the fabric content
of your garment and how it should be
washed.
••Symbols on the care labels.
Wash temperature
Normal machine wash
Caring before loading.
••Do not wash items that contain support
or memory wire such as Bras as it may
damage other clothes as well as the
washing machine and cause noise and
vibration.
••Check all pockets to make sure that
they are empty. Items such as nails, hair
clips, matches, pens, coins and keys can
damage both your washing machine and
your clothes.
Permanent press
Delicate
Hand wash
Do not wash
2
Sorting laundry.
••To get the best results, sort clothes into
loads that can be washed with the same
wash cycle.
••Different fabrics need to be washed at
varying temperatures and spin speeds.
••Wash two or more towels or knits together.
If washed separately, laundry which
absorbs a lot of water may not be washed
well or abnormal spin-drying may occur
due to an unbalanced load.
••Always sort dark colours from pale
colours and whites. Wash separately as
dye and lint transfer can occur causing
discolouration of white and pale garments.
Do not wash heavily soiled loads in this
Machine.
−−Soil (Heavy, Normal, Light) :
Separate clothes according to amount of
soil.
−−Colour (White, Lights, Darks):
Separate white fabrics from coloured
fabrics.
−−Lint (Lint producers, Collectors):
Wash lint producers and lint collectors
separately.
20
••Close zippers, hooks and strings to make
sure that these items don’t snag on other
clothes.
••Pre-treat dirt and stains by brushing a
small amount of detergent dissolved water
onto stains to help lift dirt.
••If an item of clothing has a long lace
attached to it, arrange the lace so it cannot
be tangled or put it into a washing net.
••Remove the insides of cushions, pillows,
or sitting mats and only wash the cover.
The insides may protrude, damaging
other laundry. Plastic parts may generate
abnormal vibrations.
CAUTION
••Divide laundry of large volume for seperate
washing so that the laundry can be submerged
under water completely. If laundry expands
during washing, it may cause damage to the
wash load and to the washer's parts during
washing or spin.
EN
Using the Door and Drawer
Opening the Door and Drawer
1
Push the O marked and pull out the drawer
until it is fully extended.
CAUTION
••Do not let your hands get stuck between the
door and Mini washer, as this can cause injury.
••Forcing the drawer or the door to open can
cause part damages and safety problems.
••Closing the drawer before having closed the
door completely may scratch the door glass.
••Ensure the drawer is pulled out completely to
prevent the door from contacting Main Washer.
NOTE
2
Push the O marked down on the door until
it clicks.
Closing the Door and Drawer
1
Push the O marked down on the door until
it clicks.
2
Push the drawer completely closed.
••Door lock may fail if there is too much laundry
in the machine or if the door is not completely
closed.
••If the product is operating or the drawer lock
, indicator is displayed, the door cannot open.
To open the door, press the Start/Pause button
to stop the washer, and when drawer lock
, indicator disappears, open the door. Do not
force the drawer and door open.
••If
,
,
or a warning sign appears
on the display, close the drawer and the door
completely. After doing so, press the Start/
Pause button.
••If the drawer cannot be opened completely, pull
the drawer forward with a little force using both
hands.
••If power failure occurs during product
operation, the door cannot be opened. Restore
the power again or contact the LG service
centre.
21
EN
Adding Cleaning Products
Adding Detergent
Detergent Dosage
Measure the detergent with the detergent
dispenser and pour it into the tub.
••Detergent should be used according to the
instruction of the detergent manufacturer and
selected according to type, colour, soiling of
the fabric and washing temperature.
••If too much detergent is used, too many suds
can occur and this will result in poor washing
results or cause heavy load to the motor.
••If you wish to use liquid detergent follow
the guidelines provided by the detergent
manufacturer.
••If too many suds occur, reduce the detergent
amount.
••Detergent usage may need to be adjusted for
water temperature, water hardness, size and
soil level of the load. For best results, avoid
oversudsing.
••Refer to the label of the clothes, before
choosing the detergent and water temperature.
••When using the washing machine, use
designated detergent for each type of clothing
only:
−−General powdered detergents for all types of
fabric
−−Powdered detergents for delicate fabric
−−Liquid detergents for all types of fabric or
designated detergents only for wool
••For better washing performance and whitening,
use detergent with the general powdered
bleach.
22
••Use the provided detergent measuring cup to
add only one cup of detergent.
••Less detergent is required for lightly soiled
items. Please use appropriate amount of
detergent in the Mini Washer. If you use too
much detergent, excessive bubbles will remain
after rinsing.
EN
Adding Softeners
Adding Fabric Softener
CASE 1. When the machine chimes:
1
Press Start/Pause to pause the cycle.
••It can be paused by pressing the button on
the right side of Mini Washer or by using
the remote control.
2
Slide open the drawer, open the door, and
add the liquid fabric softener.
3
Close the door, slide the drawer closed, and
press Start/Pause to restart the cycle.
NOTE
Adding Water Softener
••A water softener, such as anti-limescale (e.g.
Calgon) can be used to cut down on the use
of detergent in extremely hard water areas.
Dispense according to the amount specified
on the packaging. First add detergent and then
the water softener.
••Use the quantity of detergent required for soft
water.
CAUTION
••Do not directly pour bleach on to the clothes.
This may cause partial discoloration and
severe damage to the load.
••Do not use chlorine bleach or acidic cleaner
when washing the laundry, as it can cause
damage to clothes such as discoloration of the
clothes.
••To disable or enable the fabric softener alert,
press and hold the Extra Rinse and Child
Lock button for three seconds.
••The fabric softener can be added within 30
seconds after the chime has sounded.
CASE 2. If you miss the softener add point:
1
Press the Power button to interrupt the
cycle.
2
Slide open the drawer, open the door, and
add the liquid fabric softener.
3
Close the door, Slide the drawer, and select
the Rinse+Spin programme.
4
Press the Start/Pause to restart the cycle.
NOTE
••Do not pour fabric softener directly on the
clothes.
••The softener can also be diluted with water
and added directly into the drum. Do not pour
undiluted softener directly onto clothing as it
may stain fabrics.
23
EN
Control Panel
You can operate the Mini Washer by selecting the cycles from the control panel on the Main Washer,
Mini Washer or the remote control.
Control Panel on Main Washer
4
3
1
2
1 Display
••The display shows the cycle status and
estimated time remaining.
••The display shows the estimated time
remaining while the size of the load is
being calculated automatically.
2 Start/Pause Button
••The Start/Pause button is used to start the
wash cycle or pause the wash cycle.
••If a temporary stop of the wash cycle is
needed, press the Start/Pause button on
the Main Washer display or the remote
control.
3 Programme Button
••Programmes are available according to
laundry type.
4 Quick Setting
••Child Lock, Remote Start, Selection
of Main Washer and Mini Washer are
displayed. You can turn on or off a function
by touch.
NOTE
••If the Start/Pause button is not pressed
again to resume the cycle within 5 minutes,
the display screen on the Main Washer will
automatically turn off.
CAUTION
••Do not touch the control panel of the product with wet hands. The buttons may not function properly.
24
EN
Control Panel on Mini Washer
1
2
3
4
1 Power Button
••Press the Power button to turn the
washing machine on, or off if washing
hasn't commenced.
2 Display
••The display shows the cycle status and
estimated time remaining.
•• : Drawer lock indicator
•• : Child lock indicator
3 Start/Pause Button
••The Start/Pause button is used to start the
wash cycle or pause the wash cycle.
••If a temporary stop of the wash cycle is
needed, press the Unlock button on the
right side in the Mini washer display or the
remote control.
NOTE
••If the drawer is not closed within 5 seconds
after pressing the Start/Pause button on
the Mini Washer's control panel, the
error is appeared.
••If you do not press the Start/Pause
button within 15 minutes of selecting a
programme, or to resume the wash after
pausing already, the washing machine
automatically turns off and all cycle settings
are lost. Any water remaining in the tub will
be drained.
4 Options
••Use these buttons to select the desired
options for the selected programme.
NOTE
••The Mini Washer's control panel display is not available during operation. Use the Main Washer's
control panel or the remote to control the Mini Washer during operation.
••Only the Unlock button on the right side can be used to pause the operation.
25
EN
Programme Table
Washing Programme
All programmes are the cold water only.
Programme
Light Soil
Speed Wash
Hand Wash
Use this programme to wash
textiles, lingerie, or fine clothes
likely to shrink or deform.
Active Wear
Use this programme to wash
performance garments that are
specially designed and treated
for sports.
Rinse+Spin
Select this programme to rinse
and spin a load separately from
a regular cycle.
Tub Clean
26
Description
Use this programme to wash
lightly soiled normal items,
except delicate fabrics such as
wool or silk.
Use this programme to speed
up the washing time for small
loads and lightly soiled clothes.
Note
•• Pressing the Start/Pause button without
selecting a programme will cause the
Normal programme to begin immediately
using the default settings.
•• Use very little detergent in this programme.
•• To reduce damage to textiles and improve
washing performance, use special neutral
detergent for wool.
•• To prevent damage to clothes, the drum
spins gently to the left and right for
washing.
•• Use 1/2 the amount of detergent
recommended by the manufacturer for a
normal load.
•• Do not wash white or brightly colored
laundry with darkly colored laundry that can
discharge colors.
•• It is more effective to pre-wash laundry
which is stained with blood or milk briefly
before carrying out main washing can
remove stains more effectively.
•• Bubble Removing Function: If an excessive
amount of detergent is used, the bubble
removing function may operate.
•• Add fabric softener only.
•• Select a proper type of neutral detergent.
Use this programme to keep the
drum clean by sterilizing germs •• It is more effective to pre-wash laundry
stained with food, sweat, urine and feces
within the drum.
briefly before washing.
EN
Option Programme
Child Lock
Spin Only
Use this option to disable the controls. This
feature can prevent children from changing
cycles or operating the appliance.
Use this option to spin a hand washed load that
may not have been washed in the machine.
••The setting indicator lights above the buttons
will illuminate to show the current selection.
1
Press the Rinse+Spin button for three
seconds.
2
Press the Start/Pause button.
Locking the Control Panel
1
Press and hold the Child Lock button for
three seconds.
2
will appear on the display.
When the child lock is set, all buttons are
locked except the Power button.
No Spin
NOTE
Use this option to wash and rinse only.
••The setting indicator lights above the buttons
will illuminate to show the current selection.
••Turning off the power or completing all cycles
will not reset the child lock function. You must
deactivate child lock before you can access
any other functions.
1
2
Press the Tub Clean button for three
seconds.
Press the Start/Pause button.
Extra Rinse
Use this option to increase the number of rinsing
programmes.
1
Press the Power button.
2
Select a washing programme.
3
Press the Extra Rinse button to set the
amount of rinses required.
••When you press the Extra Rinse button,
the number of rinsing cycles (1 up to 5
depending on the programme) to be added
will be displayed.
4
Press the Start/Pause button.
Unlocking the Control Panel
Press and hold the Child Lock button for three
seconds.
••To change the cycle or option, press the Start/
Pause button to stop operation, and then
choose the cycle or option which you wish to
change. Depending on the selection, the cycle
may restart again.
27
SMART FUNCTIONS
Using the Smart Diagnosis™
Function
Use this function if you need an accurate
diagnosis by an LG Electronics service
centre when the product malfunctions or fails.
Use this function only to contact the service
representative, not during normal operation.
1
Press the Power button after opening the
drawer on Mini Washer.
2
When instructed to do so by the call centre,
place the mouthpiece of your phone close to
the Smart Diagnosis™ icon.
x.
Ma
mm
10
3
Press and hold the Extra Rinse button
for three seconds while holding the phone
mouthpiece to the Smart Diagnosis™ icon.
4
Keep the phone in place until the tone
transmission has finished. Time remaining
for data transfer is displayed.
••For best results, do not move the phone
while the tones are being transmitted.
••If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
5
Once the countdown is over and the tones
have stopped, resume your conversation
with the call centre agent, who will then
be able to assist you using the information
transmitted for analysis.
28
EN
NOTE
••The Smart Diagnosis™ function depends on
the local call quality.
••The communication performance will improve
and you can receive better service if you use
the home phone.
••If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
MAINTENANCE
WARNING
••Unplug the washing machine before cleaning
to avoid the risk of electric shock. Failure to
follow this warning may result in serious injury,
fire, electric shock, or death.
••Never use harsh chemicals, abrasive cleaners,
or solvents to clean the washing machine.
They may damage the finish.
Cleaning the Washing
Machine
Care After Wash
EN
Cleaning the Interior
••Use a towel or soft cloth to wipe around the
washing machine door opening and door glass.
* Care should be taken when removing items
from the tub after the wash as sharp objects
such as zippers can damage the door seal is
caution is not exercised.
••Always remove items from the washing
machine as soon as the cycle is complete.
Leaving damp items in the washing machine
can cause wrinkling, colour transfer, and odour.
••Run the Tub Clean programme once a month
(or more often if needed) to remove detergent
buildup and other residue
••After the cycle is finished, wipe the door and
the inside of the door seal to remove any
moisture.
••Leave the door open to dry the drum interior.
••Wipe the body of the washing machine with a
dry cloth to remove any moisture.
Cleaning the Exterior
Proper care of your washing machine can
extend its life.
Door:
••Wash with a damp cloth on the outside and
inside and then dry with a soft cloth.
Exterior:
••Immediately wipe off any spills.
••Wipe with a damp cloth.
••Do not press the surface or the display with
sharp objects.
29
EN
Cleaning the Drum
Cleaning the Water Inlet Filter
Use the Tub Clean option to keep the drum
clean.
••Turn off the water supply tap if the washing
machine is to be left for any length of time (e.g.
holiday), especially if there is no floor drain
(gully) in the immediate vicinity.
••
icon may blink on the display when the
water pressure is weak or an inlet filter is
clogged with dirt. Clean the inlet filter.
••The inlet filter mesh could be clogged by hard
water scale, sediment in the water supply, or
other debris.
1
Press the Power button.
2
Dilute 200 ml liquid chlorine bleach in 1 ℓ of
water and pour the mixture in the drum.
3
Press the Tub Clean button to set time
required.
4
1
Turn off the water tap and unscrew the water
inlet hose.
2
Clean the filter using a medium bristle tooth
brush.
Press the Start/Pause button.
CAUTION
••Do not leave the machine's door open if there
is an unsupervised child nearby.
30
EN
Cleaning the Lint Filter
The filter is an important part for efficient
washing performance result, so it needs special
care from you. It is recommended that the filter
be cleaned regularly.
1
Pull the cap of the lint filter.
Caution on Freezing During
Winter
••When frozen, the product does not operate
normally. Make sure to install the product
where it will not freeze during winter.
••In case the product must be installed outside
on a porch or in other outdoor conditions, make
sure to check the following.
How to Keep the Product from
Freezing
••After closing the tap, disconnect the cold
supply hose from the tap, and remove water
while keeping the hose facing downwards.
2
Open the cap and remove lint and then wash
out.
3
Insert the lower part of the filter into the
drum and close the cap until you hear a click
sound.
Supply hose
NOTE
••When the lint filter is damaged, contact LG
service centre.
••Do not operate the washing machine without
the lint filter.
••Do not place the lint filter loosely. Doing so may
damage the fabrics or the washing machine.
31
EN
How to Handle Freezing
Step 1. When the Door is Frozen
••Thaw out the door using a hot water cloth.
Step 2. When the Water Supply Hose is
Frozen
••
icon may blink on the display when water
supply problems occur, take the following
measures.
−−Take out water supply hose and connect to
the tap and check that water comes from the
tap and supply hose.
−−Turn off the tap, and thaw out the tap and
both connection areas of supply hose of the
product using a hot water cloth.
−−Take out supply hose and immerse in warm
water below 50–60 °C.
Supply hose
32
50‒60 °C
Step 3. When the Drain Pump is Frozen
••
,
icon may blink on the display when
drain pump problems occur, take the following
measures.
1
Pour 15 ℓ warm water below 50–60 °C in the
drum until washing machine wing nuts are
immersed and wait for an hour.
2
If the drawer is open, press the Rinse+Spin
button for three seconds and press the
Start/Pause button to run the Spin Only.
3
Select the Rinse+Spin programme and
press the Start/Pause button to check that
the washing machine works.
4
When
icon appears on the display,
thaw out the drain hose inner part with the
hot water.
TROUBLESHOOTING
EN
The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems
at an early stage. If the appliance does not function properly or does not function at all, check the
following before you call for service:
Diagnosing Problems
Symptoms
The drawer does
not open.
Reason
Power failure, or the power
cord was pulled out during
washing.
The machine may not be
level.
Draining starts
when pressing
Start/ Pause
button.
The Start/Pause button is
pressed during washing.
Rattling and
clanking noise
Foreign objects, such as
keys, coins, or safety pins
may be in the drum.
Thumping sound
Vibrating noise
Wash loads exceeding
manufacturer’s recommended
maximum load may produce a
thumping sound.
Wash load may be out of
balance.
Packaging materials were not
removed.
Wash load may be unevenly
distributed in the drum.
Not all leveling feet are
resting firmly and evenly on
the floor.
Floor not rigid enough.
Water leaks every
load
Hoses not installed correctly.
Excessive sudsing
Too much detergent or
incorrect detergent.
Solution
••After restoring the power again, press the
Power button on the control panel of the
Main Washer or the remote control.
••Ensure that the Mini Washer is leveled
correctly with the use of a spirit level and
checking the door symmetry for parallel
lines.
••When pressing the Start/Pause button
during washing, the drawer is unlocked
after the water is drained out for safety
reasons.
••Stop the washing machine, check drum
for foreign objects. If noise continues after
washing machine is restarted, call for
service.
••If sound continues, wash load is probably
out of balance. Stop and redistribute the
wash load.
••Pause the cycle and redistribute the load
after the door unlocks.
••Remove packing materials.
••Pause the cycle and redistribute the load
after the door unlocks.
••See Leveling the Appliance in the
Installation section.
••Make sure that the floor is solid and does
not flex.
••Check all fill and drain hose connections
to ensure that they are tight and secure.
••Less detergent is required for lightly soiled
items. Please use appropriate amount of
detergent in the Mini Washer. If you use
too much detergent, excessive bubbles
will remain after rinsing.
33
EN
Symptoms
Staining
Water leaking
Wrinkling
34
Reason
Solution
Clothes were not properly
sorted.
••Always wash dark colors separately
from light colors and whites to prevent
discoloration.
••Never wash heavily soiled items washed
with lightly soiled items.
Supply hose connection is
loose at the tap, washing
machine, or drain hose
connector.
••Check hoses and drain hose connectors
for leaks, cracks and splits.
••Tighten hose connections.
••The washing machine pumps out water
very rapidly. Check for water backing up
out of the drain pipe during drain. If water
House drain pipes are
is seen coming out of the drain, check for
clogged.
proper drain hose installation and check
for restrictions in the drain. Contact a
plumber to repair the drain pipe.
••Tie drain hose to supply hose or
standpipe to prevent it from coming out
Drain hose has come out
during drain. For smaller drain pipes,
of drain connector or is not
insert the drain hose into the pipe as far
inserted far enough.
as the drain hose flange. For larger drain
pipes, insert the drain hose into the pipe
2-5 cm past the flange.
••Reduce the load or use the Main Washer.
Load is too large for the
••Stop the washing machine and check the
drum.
load. Make sure the load fits loosely in the
drum and the door closes easily.
••Oversudsing may create leaks, and
may be caused by the type and amount
of detergent used. Always reduce the
Oversudsing of detergent.
amount of detergent if the load is small
or lightly soiled, or if your water is very
soft. Never use more than the maximum
amount shown in the dispenser provided.
•
•
Always remove items from the washing
Washing machine not
machine as soon as the cycle is
unloaded promptly.
completed.
••The washing machine can be fully loaded,
Washing machine overloaded. but the drum should not be tightly packed
with items. The door of the washing
machine should close easily.
EN
Symptoms
Washing machine
will not operate.
Reason
Solution
Control panel has powered off ••This is normal. Press the Power button to
due to inactivity.
turn the washing machine back on.
Washing machine is
••Make sure the power cord is plugged
unplugged.
securely into a working outlet.
Water supply is turned off.
••Turn the cold water tap fully on.
••Make sure the cycle was set correctly,
Controls are not set properly.
close the door and press the Start/Pause
button.
••Close the door and drawer make sure
Door or drawer is open.
that nothing is caught under the door
preventing it from closing completely.
••Check house circuit breakers/fuses.
Replace fuses or reset breaker. The
Circuit breaker/fuse is
washing machine should be on a
tripped/blown.
dedicated circuit. The washing machine
will resume the cycle from where it
stopped once power is restored.
••Press the Power button, then re-select
Control needs to be reset.
the desired programme and press the
Start/Pause button.
••Press the Start/Pause button on the
control panel of the Main Washer or
Start/Pause was not pressed
remote control after closing the drawer.
after a cycle was set.
••When using the control panel of the Mini
Washer, press the Start/Pause button
and close the drawer within 5 seconds.
••Check another tap in the house to make
Extremely low water pressure. sure that household water pressure is
adequate.
••If the washing machine has been exposed
to temperatures below freezing for an
Washing machine is too cold.
extended period of time, allow it to warm
up before pressing the Power button.
35
EN
Symptoms
Reason
Filter clogged.
Supply hoses may be kinked.
Washing machine
is not filling
properly.
Insufficient water supply.
door and drawer are open.
Water level is too low.
Water in the
washing machine
does not drain or
drains slowly.
Wash cycle time is
longer than usual.
Musty or mildewy
odor in washing
machine
Washing machine
chimes repeatedly
before final rinse.
36
••Make sure the inlet filters on the fill
valves are not clogged. Refer to the filter
cleaning instructions.
••Check that supply hoses are not kinked or
clogged.
••Make sure that the cold water tap is
turned on all the way.
••The washing machine will not operate
if the door is open. Close the door and
make sure that nothing is caught under
the door preventing it from closing
completely.
••The fill level is optimized for the wash
motion to achieve the best wash
performance.
sure the drain hose is free of
Drain hose is kinked, pinched, ••Make
blockages, kinks, etc., and is not pinched
or clogged.
behind or under the washing machine.
Heavily soiled load.
Poor stain removal
Solution
Previously set stains.
The washing machine
automatically adjusts the
wash time for the amount of
laundry, water pressure and
other operating conditions.
Incorrect or too much
detergent has been used.
••Use Main Washer.
••Articles that have previously been washed
may have stains that have been set.
These stains may be difficult to remove
and may require hand washing or pretreating to aid in stain removal.
••This is normal. The washing machine
adjusts cycle time automatically to
provide optimal results for the selected
programme. The time remaining shown
in the display is only an estimate. Actual
time may vary.
••This machine requires very little
detergent. Use the provided detergent
measuring cup.
Inside of drum was not
cleaned properly.
••Run the Tub Clean programme regularly.
This is not an error.
••This is an alert to allow the addition of
liquid fabric softener before the final rinse.
EN
Error Messages
Symptoms
Reason
Solution
••Close the drawer and press Start/Pause
button to start the cycle.
Drawer is not closed properly. ••If the drawer is closed and the drawer
lock error message is displayed, call for
service.
••Open the drawer and make sure the
latch area is free of clothing or other
obstructions.
Door is not closed properly.
••Close the door, shut the drawer, and
press Start/Pause to start the cycle.
••If the door is closed and the door error
message is displayed, call for service.
The cold water tap is not fully ••Make sure that the cold water tap is fully
open.
open.
••Make sure that the hoses are not kinked
Water line hoses are kinked,
or pinched. Be careful when moving the
pinched, or crushed.
washing machine during cleaning and
maintenance.
Water inlet filters are clogged. ••Clean the inlet filters.
••Check another tap in the house to make
sure that household water pressure
is adequate and flow is not restricted.
Water supply pressure to tap
Disconnect the supply hose from the
or house is too low or very
washing machine and run a few liters of
high.
water through the hose to flush the water
supply lines. If water pressure is too high,
it may need a pressure reduction device
fitted to the tap.
••Hoses designed to limit leaks can trip
Water supply connected with
falsely and prevent the washing machine
leak-limiting hoses.
from filling. The use of leak limiting hoses
is not recommended.
•
•
Make
sure the drain hose is free of
Drain hose is kinked, pinched, blockages,
kinks, etc., and is not pinched
or clogged.
behind or under the washing machine.
37
EN
Symptoms
Reason
Solution
The load is out of balance.
••The automatic attempt to rebalance the
load was not successful. The cycle has
been paused to allow the load to be
manually adjusted.
••Add more items to allow the washing
machine to balance the loads.
••Wash articles of somewhat similar weight.
••Remove heavy articles. The Mini Washer
is designed to wash light or delicate items
only.'
••Manually redistribute the load if articles
have become tangled.
Control error.
••Unplug the power plug and call for
service.
Water level is too high due to
a faulty water valve.
••Close the cold water tap, unplug the
washing machine, and call for service.
The water level sensor is not
working correctly.
••Close the cold water tap, unplug the
washing machine, and call for service.
A motor error has occurred.
••Allow the washing machine to stand for 30
minutes and then restart the cycle. If the
LE error code persists, call for service.
It is a reminder to run the Tub
Clean programme.
••Run the Tub Clean programme.
UE rebalancing operation was
not successful.
The load is too small.
Heavy articles are mixed with
lighter items.
Washer will not operate as a
Mini Washer is being operated ••Mini
standalone unit. It must be stacked under
without a full-size washing
a suitable LG front-loading washing
machine.
machine.
••The stacking switch will not operate
properly if the unit is not stacked under
Stacking switch is not
a matching LG Signature washer. This
working properly.
product is for use only in combination with
LG authorized compatible appliances.
•
•
Thaw
out the supply hose using a hot
Drain hose, supply hose or
water cloth.
drain pump is frozen.
••Pour warm water in the drum.
CL is not an error. This
prevents children from
changing cycles or operating
the appliance.
38
••To deactivate, turn off the Child Lock in
control panel of Main washer or press the
Child Lock button for three seconds in
control panel of Mini Washer.
Memo
Memo
Memo
Memo
Memo
Memo
Memo
Memo
Download PDF

advertising