LG | 42LT650H | LG 42LT650H Owner’s Manual

OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating your set and retain it
for future reference.
LT64**
LT65**
LT74**
LT76**
LS34**
LS64**
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3
LICENSES
32 MAINTENANCE
3
OPEN SOURCE SOFTWARE
NOTICE
32 Cleaning your TV
32 - Screen, frame, cabinet and stand
32 - Power cord
4
INSTALLATION PROCEDURE
32 TROUBLESHOOTING
4
ASSEMBLING AND
PREPARING
33 CAUTION FOR USING
EZSIGN
4
8
9
11
12
12
15
17
19
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
20 MAKING CONNECTIONS
20
20
21
22
23
23
24
24
24
25
25
25
26
26
26
27
Adapter connection
Antenna connection
HDMI connection
DVI to HDMI connection
Component connection
RGB-PC connection
Composite connection
Audio connection
- Digital optical audio connection
Speaker output setup
- Volume control port
External speaker out
Network Connection
- Connecting to a Wired Network
Headphone connection
USB connection
28 REMOTE CONTROL
34 SPECIFICATIONS
39 IR CODES
40 EXTERNAL CONTROL
DEVICE SETUP
40 RS-232C Setup
40 Type of connector;
D-Sub 9-Pin Male
40 RS-232C Configurations
41 Communication Parameters
41 Command reference list
42 Transmission / Receiving Protocol
WARNING
If you ignore the warning message, you may
yy
be seriously injured or there is a possibility
of accident or death.
CAUTION
If you ignore the caution message, you may
yy
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use
yy
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit
divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”
Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
ENGLISH
ENG
ENGLISH
LICENSES
4
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
ENGLISH
NOTE
Image shown may differ from your TV.
yy
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy
The available menus and options may differ from the input source or product model that you are
yy
using.
New features may be added to this TV in the future.
yy
The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
yy
be turned off if it will not be watched for some time, as this will reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture
yy
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available. You can use the TV network functions only when the
network connection is made. (Only LT74**, LT76**)
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and item.
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
yy
Some models have a thin film attached on to the screen and this must not be removed.
yy
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to upgrade
yy
of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
yy
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
B
A
B
A
*A
10 mm
*B
18 mm
ASSEMBLING AND PREPARING
ENGLISH
ENG
ENGLISH
ENERGY AV MODE INPUT
TV
SAVING
1
2
3
4
5
6
7
8
9
LIST
0
FLASHBK
MARK
FAV
VOL
3D
CH
P
A
G
E
MUTE
MENU INFO
Q.MENU
ENTER
BACK
EXIT
L/R SELECT
FREEZE
RATIO
5
Remote control,
Batteries (AAA)
(See p.28, 29, 30, 31)
Owner’s manual
Cable holder
(Depending on model)
(See p.19)
Power cord
(Depending on model)
Stand Screws
8 EA, M4 x 12
(Only 26LT64**, 26LT65**)
(See p.12)
Stand Screws
8 EA, M4 x 14
(Only 32/37/42/47LT64**,
32/37/42/47LT65**,
32/37/42/47LT74**,
32/37/42/47LT76**)
(See p.13)
Stand Screws
2EA, P4 x 16
4EA, M4 x 20
(Only 32LS34**)
(See p.13)
Stand Screws
4EA, P4 x 16
4EA, M4 x 14
(Only 42LS34**)
(See p.14)
Stand Screws
8 EA, M4 x 20
(Only 55LS64**)
(See p.14)
Desk-mount Screw
1 EA
(Only 32/37/42/47LT64**,
32/37/42/47LT65**,
32/37/42/47LT74**,
32/37/42/47LT76**,
32/42LS34**)
(See p.15)
Wall mount Screws
4 EA, M6 x 51
(Only 47LT**** models)
Stand Screws
4EA, M4 x 12
2EA, P4 x 16
(Only 22LT65**)
(See p.12)
Power Cord holder
(Only 32/37/42/47LT64**,
32/37/42/47LT65**,
32/37/42/47LT74**,
32/37/42/47LT76**)
(See p.19)
Protection cover
(Only 32/37/42/47LT64**,
32/37/42/47LT65**,
32/37/42/47LT74**,
32/37/42/47LT76**)
(See p.18)
Protection cover
(Only 32LS34**)
(See p.18)
DC Adapter
(Only 26LT64**,
22/26LT65**)
(See p.20)
6
ASSEMBLING AND PREPARING
ENGLISH
ENG
ENGLISH
or
Stand body / Stand base
(Only 26LT64**,
22/26LT65**)
(See p.12)
Stand body / Stand base
(Only 32/37/42/47LT64**,
32/37/42/47LT65**,
32/37/42/47LT74**,
32/37/42/47LT76**)
(See p.13)
Stand body / Stand base
(Only 32LS34**)
(See p.13)
Stand body / Stand base
(Only 42LS34**)
(See p.14)
Stand body / Stand base
(Only 55LS64**)
(See p.14)
EzSign Editor CD
(Only LT640E)
Isolator
(Depending on model)
(See p.7)
Wall mount inner
spacers
4EA
(Only 55LS64**)
(See p.18)
ASSEMBLING AND PREPARING
Antenna Isolator Installation Guide
yy
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.
»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact
might be heated and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall,
mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a cable
distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection
to a cable distribution system has therefore to be provided through a device providing electrical
isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ENGLISH
ENG
ENGLISH
NOTE
7
8
ASSEMBLING AND PREPARING
ENGLISH
ENG
ENGLISH
CAUTION
Power Cord Installation Guide
yy
-- If the power cord provided with TV looks like the below picture, please ensure that it is inserted in
the right direction.
Correct
Power Cord
TV
Wrong
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buying these items.
These devices only work with certain models.
AN-WF100
Wireless Dongle
(Only LT640E)
Compatibility
LT640E
AN-WF100
Wireless Dongle
•
LT640H, LT650H, LT740H,
LT760H, LS345H, LS645H
ASSEMBLING AND PREPARING
9
ENGLISH
ENG
ENGLISH
Parts and buttons
(Only LT64**, LT65**, LT74**, LT76**)
Buttons
(Only
32/37/42/47LT64**,
32/37/42/47LT65**,
32/37/42/47LT74**,
32/37/42/47LT76**)
Screen
Buttons
(Only 26LT64**,
22/26LT65**)
Remote control sensor
Power Indicator
(Can be adjusted using
the Power Indicator
in the OPTION -menu.)
Speakers
Clock LED
(Only LT64**, LT74**)
Button
Description
∧∨
Scrolls through the saved programmes.
+-
Adjusts the volume level.
Turns the power on or off.
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
ENGLISH
(A type : Only 32/42LS34**)
(B type : Only 55LS64**)
Button
Screen
Screen
Remote control
sensor
OK
OK
SETTINGS
Speakers
INPUT
Power Indicator
(Can be adjusted
using the Power
Indicator in the
OPTION menu.)
SETTINGS
INPUT
Speakers
Remote control sensor
OK
Power indicator
SETTINGS
INPUT
Touch buttton1
A type
B type
Button
Touch button
∧∨
∨∧
Scrolls through the saved programmes.
+-
-+
Adjusts the volume level.
H
S
H
OK
SETTINGS
INPUT
/I
Description
Selects the highlighted menu option or confirms an input.
Accesses the main menu, or saves your input and exits the menus.
Changes the input source.
Turns the power on or off.
1 B type buttons are touch sensitive and can be operated through simple touch with your finger.
ASSEMBLING AND PREPARING
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
When transporting a large TV, there should be
yy
at least 2 people.
When transporting the TV by hand, hold the TV
yy
as shown in the following illustration.
CAUTION
Avoid touching the screen at all times, as this
yy
may result in damage to the screen.
It is recommended to move the TV in the box
yy
or packing material that the TV originally came
in.
Before moving or lifting the TV, disconnect the
yy
power cord and all cables.
When holding the TV, the screen should face
yy
away from you to avoid damage.
Hold the top and bottom of the TV frame firmly.
yy
Make sure not to hold the transparent part,
speaker, or speaker grill area.
When transporting the TV, do not expose the
yy
TV to jolts or excessive vibration.
When transporting the TV, keep the TV upright,
yy
never turn the TV on its side or tilt towards the
left or right.
Do not apply excessive pressure to cause
yy
flexing / bending of frame chassis as it may
damage screen.
ENGLISH
ENG
ENGLISH
Lifting and moving the TV
11
12
ASSEMBLING AND PREPARING
ENGLISH
ENG
ENGLISH
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
(Only 26LT64**, 22/26LT65**)
3
1
M4 x 12
4 EA
Stand Body
M4X20
Front
Stand Base
Top View
P4 x 16
2 EA
(Only 22LT65**)
2
M4 x 12
4 EA
(Only 26LT64**,
26LT65**)
ASSEMBLING AND PREPARING
(Only 32LS34**)
1
1
P4 x 16
M4 x 14
4 EA
Stand Body
M4X20
2EA
Stand Body
Front
Stand Base
Stand Base
Top View
2
3
Top View
2
3
M4 x 14
4 EA
M4 x 20
4EA
ENGLISH
ENG
ENGLISH
(Only 32/37/42/47LT64**, 32/37/42/47LT65**,
32/37/42/47LT74**, 32/37/42/47LT76**)
13
14
ASSEMBLING AND PREPARING
ENGLISH
ENG
ENGLISH
(Only 55LS64**)
(Only 42LS34**)
1
1
P4 x 16
4EA
M4 x 20
4EA
Stand Body
Stand Body
Front
Stand Base
Stand Base
Top View
2
Top View
2
3
3
M4 x 14
4EA
M4 x 20
4EA
ASSEMBLING AND PREPARING
15
When attaching the stand to the TV
yy
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
Make sure that the screws are inserted
yy
correctly and fastened securely. If they are
not fastened securely enough, the TV may
tilt forward after being installed.
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
(Only 32/37/42/47LT64**, 32/37/42/47LT65**,
32/37/42/47LT74**, 32/37/42/47LT76**)
4-Screws
(not provided as parts of the product)
NOTE
Stand
Remove the stand before installing the TV
yy
on a wall mount by performing the stand
attachment in reverse.
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
-Leave a 10 cm (minimum) space from the
wall for proper ventilation.
Table
Screws: M5 x L (*L: Table depth + 8-10 mm)
ex) Table depth: 15 mm, Screw: M5 x 25
Securing the TV to a table
10 cm
10 cm
m
10 c
10 cm
(Only 32/37/42/47LT64**, 32/37/42/47LT65**,
32/37/42/47LT74**, 32/37/42/47LT76**,
32/42LS34**)
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
2 Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources of
yy
heat, as this may result in fire or other
damage.
WARNING
To prevent TV from falling over, the TV
yy
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
ENGLISH
ENG
ENGLISH
Attaching the TV to a table
CAUTION
16
ASSEMBLING AND PREPARING
ENGLISH
ENG
ENGLISH
Adjusting the angle of the TV to suit view
Swivel 90 degrees to the left or right and adjust the
angle of the TV to suit your view.
(Only LT64**, LT65**, LT74**, LT76**)
90
Securing the TV to a wall
(This feature is not available for all models.)
90
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
(Only LS64**)
1 Insert and tighten the eye-bolts, or TV brackets
CAUTION
When adjusting the angle of the product, watch
yy
out for your fingers.
»» Personal injury may occur if hands or
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
WARNING
yyIf a television is not positioned in a sufficiently
stable location, it can be potentially hazardous
due to falling. Many injuries, particularly to
children, can be avoided by taking simple
precautions such as:
»» Using cabinets or stands recommended
by the manufacturer of the television.
»» Only using furniture that can safely
support the television.
»» Ensuring the television is not overhanging
the edge of the supporting furniture.
»» Not placing the television on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and
the television to a suitable support.
»» Not standing the televisions on cloth
or other materials placed between the
television and supporting furniture.
»» Educating children about the dangers
of climbing on furniture to reach the
television or its controls.
and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
yy
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
yy
large enough to support the TV securely.
Brackets, bolts and ropes are not provided.
yy
You can obtain additional accessories from
your local dealer.
ASSEMBLING AND PREPARING
(This feature is not available for all models.)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase (Wall Mounting Bracket)
Model
26LT64**,
22/26LT65**
VESA
Standard screw
Number of screws
Wall mount
bracket
100 x 100
M4
4
LSW100B(G)
Model
37/42LT64**,
37/42LT65**,
37/42LT74**,
37/42LT76**,
42LS34**
Connect the Kensington security system cable
between the TV and a table.
VESA
Standard screw
Number of screws
Wall mount
bracket
Mounting on a wall
Model
Attach an optional wall mount bracket at the rear of
the TV carefully and install the wall mount bracket
on a solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
VESA
Standard screw
Number of screws
Wall mount
bracket
200 x 200
M6
4
LSW200B(G)
47LT64**,
47LT65**,
47LT74**,
47LT76**,
55LS64**
400 x 400
M6
4
LSW420BX
LG recommends that wall mounting be performed
by a qualified professional installer.
A
10 cm
B
10 cm
10 cm
10 cm
32LT64**,
32LT65**,
32LT74**,
32LT76**,
32LS34**
200 x 100
M4
4
LSW220BX
ENGLISH
ENG
ENGLISH
Using the Kensington security system
17
18
ASSEMBLING AND PREPARING
ENGLISH
ENG
ENGLISH
CAUTION
Disconnect the power first, and then move
yy
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
yy
wall, it may fall and result in severe injury.
Use an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
yy
cause damage to the TV and void your
warranty.
Use the screws and wall mount bracket
yy
that meet the VESA standard. Any
damages or injuries by misuse or using an
improper accessory are not covered by the
manufacturer's warranty.
On the 47LT**** models, use M6 x 51
yy
screws.
If you use the wall mounting bracket, do
yy
not fix screw into holes for assembling the
stand.
NOTE
Use the screws that are listed on the VESA
yy
standard screw specifications.
The wall mount kit includes an installation
yy
manual and necessary parts.
The wall mount bracket is not provided. You
yy
can obtain additional accessories from your
local dealer.
The length of screws may differ depending
yy
on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
yy
supplied with the wall mount.
When attaching a third-party wall mounting
yy
bracket to the TV, insert the wall mount
inner spacers into the TV wall mount holes
to move your TV in vertical angle. Please
make sure not to use the spacers for LG
wall mounting bracket. (Only 55LS64**)
Not using the DESK-TYPE STAND
(Only 32/37/42/47LT64**, 32/37/42/47LT65**,
32/37/42/47LT74**, 32/37/42/47LT76**)
Image shown may differ from your TV.
When installing the wall-mounted unit, use the
protection cover.
Insert the Protection cover into the TV until
clicking sound.
Protection Cover
(Only 32LS34**)
When installing the wall mounting bracket, use the
Protection cover. This will protect the opening from
accumulating dust and dirt.
Push the supplied protection cover into the
yy
opening at the bottom of the TV until it locks
in place.
Protection cover
NOTE
When removing Protection Cover from bottom
yy
of TV insert your fingers into hole of cover
hold firmly and pull upwards towards you to
remove. (Only 32LS34**)
Wall Mount Inner Spacer
Protection cover
ASSEMBLING AND PREPARING
(Only 32/42LS34**)
(Only 32/37/42/47LT64**, 32/37/42/47LT65**,
32/37/42/47LT74**, 32/37/42/47LT76**)
1 Gather and bind the cables with the Cable
Holder on the TV back cover.
1 Install the Power Cord Holder and Power Cord.
It will help prevent the power cable from being
removed by accident.
Cable Holder
Power Cord Holder
2 Gather and bind the cables with the cable
holder.
Cable Holder
(Only 26LT64**, 22/26LT65**, 55LS64**)
1 Gather and bind the cables with the cable
holder.
Cable Holder
CAUTION
Do not move the TV by holding the Cable
yy
Holder and Power Cord Holder, as the Cable
holders may break, and injuries and damage
to the TV may occur.
ENGLISH
ENG
ENGLISH
Tidying cables
19
20
ENGLISH
ENG
ENGLISH
LE
MAKING CONNECTIONS
MAKING
CONNECTIONS
This section on MAKING CONNECTIONS mainly
uses diagrams for the 32LT64** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information on external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
NOTE
The external device connection may differ
yy
from the model.
Connect external devices to the TV
yy
regardless of the order of the TV port.
If you record a TV program on a DVD
yy
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
on recording, refer to the manual provided
with the connected device.
Refer to the external equipment’s manual for
yy
operating instructions.
If you connect a gaming device to the TV,
yy
use the cable supplied with the gaming
device.
ANTENNA
IN
In PC mode, there may be noise associated
yy
with the resolution, vertical pattern, contrast
IN
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
In PC mode, some resolution settings may
yy
not work properly depending on the graphics
card.
Adapter connection
(Only 26LT64**, 22/26LT65**)
DC IN
DC Adapter
1 Connect the antenna cable to the antenna
input port on the TV.
2 Connect the DC adapter plug to the power
input jack on the TV.
3 Connect the power cord to the DC adapter first,
then plug the power cord into the wall power
outlet.
Antenna connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
ANTENNA /
CABLE IN
NOTE
Use a signal splitter to use more than 2 TVs.
yy
If the image quality is poor, install a signal
yy
amplifier properly to improve the image
quality.
If the image quality is poor with an antenna
yy
connected, try to realign the antenna in the
correct direction.
An antenna cable and converter are not
yy
supplied.
Supported DTV Audio: MPEG, Dolby Digital,
yy
Dolby Digital Plus, HE-AAC
MAKING CONNECTIONS
(Only 32/37/42/47LT76**)
Transmits the digital video and audio signals from
your PC to the TV. Connect the PC and the TV
with the HDMI cable as shown. Choose any HDMI
input port to connect. It does not matter which port
you use.
3
(Only LT64**,
LT65**, LS34**
LS64**, LT76**)
DVD/ Blu-Ray /
HD Cable Box /
HD STB / PC
1
2
(*Not Provided)
HDMI
NOTE
It is recommended to use the TV with the
yy
HDMI connection for the best image quality.
Use the latest High Speed HDMI™ Cable
yy
with CEC (Customer Electronics Control)
function.
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
Supported HDMI Audio format : Dolby
yy
Digital, PCM (Up to 192 KHz, 32 KHz/44.1
KHz/48 KHz/88 KHz/96 KHz/176 KHz/192
KHz, DTS Not supported.)
ARC (Audio Return Channel)
An external audio device that supports
yy
SIMPLINK and ARC must be connected
using HDMI/DVI IN 1 (ARC) port.
When connected with a high-speed HDMI
yy
cable, the external audio device that
supports ARC outputs optical SPDIF without
additional optical audio cable and supports
the SIMPLINK function.
ENGLISH
ENG
ENGLISH
HDMI connection
21
22
MAKING CONNECTIONS
(Only LS34**)
VIDEO
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
Choose any HDMI input port to connect. It does
not matter which port you use.
L/MONO AUDIO R
L
(Only LT64**, LT65**, LT74**, LT76**, LS64**)
WHITE
R
RED
AUDIO IN (RGB/DVI)
(Only LT64**,
LT65**, LT76**,
LS64**)
1
2
3
ENGLISH
ENG
ENGLISH
DVI to HDMI connection
(*Not Provided)
AUDIO IN
(RGB/DVI)
1
2
DVI OUT
AUDIO OUT
(*Not Provided)
DVD/ Blu-Ray / HD Cable Box / PC
AUDIO OUT
DVI OUT
NOTE
yyDepending on the graphics card, DOS mode
may not work if a HDMI to DVI Cable is in use.
DVD/ Blu-Ray / HD Cable Box / PC
OPTICAL
DIGITA
T L
AUDIO OUT
SPEAKER
OUT
(RGB/DVI)
AUDIO IN
RGB IN (PC)
VOLUME CONTROL
STEREO(8 )
RS-232C IN
(CONTROL & SERV
R ICE)
ANTENNA
IN
MAKING CONNECTIONS
23
RGB-PC connection
(Only LT64**, LT65**, LT74**, LS64**)
Transmits the video signal from PC to the TV. To
transmit an audio signal, connect an audio cable.
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with the component cable as
shown.
(Only LT64**, LT65**, LT74**, LT76**, LS64**)
AUDIO IN
(RGB/DVI)
VIDEO
VIDEO
GREEN
RGB IN (PC)
AV IN
BLUE
WHITE
(*Not Provided)
VIDEO
AUDIO
L/MONO AUDIO R
RED
RED
AV IN
(*Not Provided)
AUDIO OUT
RGB OUT(PC)
R
PC
RED
WHITE
RED
BLUE
GREEN
(Only LS34**)
VIDEO
RGB IN (PC)
R
L/MONO AUDIO R
AUDIO
L
VIDEO
AUDIO IN (RGB/DVI)
DVD / Blu-Ray / HD Cable Box
(*Not Provided)
NOTE
If cables are not installed correctly, it could
yy
cause this image to display in black and
white or with distorted colours.
RGB OUT(PC)
PC
AUDIO OUT
ENGLISH
ENG
ENGLISH
Component connection
24
MAKING CONNECTIONS
ENGLISH
ENG
ENGLISH
Composite connection
Audio connection
Transmits the analogue video and audio signals
from an external device to the TV. Connect the
external device and the TV with the composite
cable as shown.
(Only 32/37/42/47LT64**, 32/37/42/47LT65**,
LT74**, LT76**, LS64**)
(Only LT64**, LT65**, LS64**)
You may use an optional external audio system
instead of the built-in speaker.
NOTE
VIDEO
VIDEO
YELLOW
If you use an optional external audio device
yy
instead of the built-in speaker, set the TV
speaker feature to off.
AV IN
AUDIO
L/MONO AUDIO R
RED
Digital optical audio connection
WHITE
RED
(Only LT74**, LT76**
LS34**)
VIDEO
L/MONO AUDIO R
R
Transmits the digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
YELLOW
WHITE
OPTICAL
DIGITA
T L
AUDIO OUT
RED
(*Not Provided)
YELLOW
WHITE
RED
R
(*Not Provided)
L/MONO
Digital Audio System
OPTICAL AUDIO IN
NOTE
VCR / DVD / Blu-Ray / HD Cable Box
Do not look into the optical output port.
yy
Looking at the laser beam may damage your
vision.
Audio with ACP (Audio Copy Protection)
yy
function may block digital audio output.
REMOTE CONTROL
Connect the external speaker to the Speaker
output(STEREO) jack on the TV.
Volume control port
Cable
Spec.
GND / Up / Down
(Only LT64**, LT65**, LT76**, LS64**)
UP
DOWN
ENGLISH
ENG
ENGLISH
Speaker output setup
25
Control port for
Speaker out
Each Up/ Down pin is pulled to 3.3V with CPU
yy
GPIO.
CPU detects that vol. crtl. Port is shorted to
yy
GND for volume control. (Only LT64**, LT65**,
LT76**, LS64**)
CPU detects transition from 3.3V to GND level
yy
for volume control.
SPEAKER
OUT
VOLUME
CONTROL
STEREO
NOTE
(8 )
LL+
R+
R-
(Only LT74**)
UP
DOWN
Control port for
Speaker out
External speaker must be used four
yy
plug(BTL: Bridge Tied Load, Stereo) as
shown in the drawings and external speaker
fully inserted with external Speaker Jack.
(Only LT64**, LT65**, LT76**, LS64**)
External speaker must be used three plug
yy
(SE : Single Ended, Stereo) as shown in
the drawings and external speaker fully
inserted with external Speaker Jack. (Only
LT74**)
Otherwise it will cause defact.
yy
External speaker out
(Only LS34**)
SPEAKER
OUT
Connecting External Speaker.
VOLUME
CONTROL
EXTERNAL
SPEAKER OUT
STEREO
(8 )
LL+
R+
R-
GND
RIGHT
NOTE
LEFT
GND
Make sure when connecting External
yy
Speaker that TV is Power OFF.
26
MAKING CONNECTIONS
ENGLISH
ENG
ENGLISH
Headphone connection
Network Connection
(Only LT74**, LT76**)
(Only LT64**, LT65**, LT74**, LS64**)
Connecting to a Wired Network
This TV can be connected to a local area network
(LAN) via the LAN port. After making the physical
connection, the TV needs to be set up for network
communication.
(Image shown may differ from your TV.)
Transmits the headphone signal from the TV to
an external device. Connect the external device
and the TV with the headphone.
(*Not Provided)
H
2
1
AUX LAN
2
LAN
NOTE
1
Broadband Modem
Router
Broadband Service
Broadband Modem
Broadband Service
1 Connect the LAN port of the Modem or Router
to the LAN port on the TV.
2 Connect the LAN port of the PC to the AUX LAN
port on the TV.
CAUTION
yyDo not connect a modular phone cable to the
LAN port.
yySince there are various connection methods,
please follow the specifications of your
telecommunication carrier or internet service
provider.
AUDIO menu items are disabled when
yy
connecting a headphone.
When changing AV MODE with a headphone
yy
connected, the change is applied to video
but not to audio.
Optical Digital Audio Out is not available
yy
when connecting a headphone.
Headphone impedance: 16 Ω
yy
Max audio output of headphone: 9 mW to 15
yy
mW
Headphone jack size: 0.35 cm
yy
MAKING CONNECTIONS
Connect a USB storage device such as s USB
flash memory, external hard drive or a USB
memory card reader to the TV.
USB IN
(Only LT64**, LT65**, LT74**, LS64**, LS34**)
USB
(*Not Provided)
USB IN
USB IN
(Only LT76**)
(*Not Provided)
(*Not Provided)
NOTE
yyTo use a USB Hub device, make sure that it is
connected to the USB IN 1 (HUB) port.
yySome USB Hubs may not work. If a USB
device connected using a USB Hub is not
detected, connect it to the USB port on the TV
directly.
ENGLISH
ENG
ENGLISH
USB connection
27
28
REMOTE CONTROL
ENGLISH
ENG
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
yy
In Analogue TV and some countries, some remote control buttons may not work.
yy
Make sure to point the remote control toward the remote control sensor on the TV.
(Only LT64**)
Number buttons
Enters numbers.
POWER
Turns the TV on or off.
ꕊ ENERGY SAVING
Adjusts the brightness of the screen to
reduce energy consumption.
ENERGY
AV MODE
LIST
Accesses the saved programme list.
INPUT
TV/
RAD
AV MODE
Selects an AV mode.
INPUT
Changes the input source.
TV/RAD
Selects Radio, TV and DTV programme.
GUIDE
- Shows programme guide. (Only LT640H)
- Shows Contents List in EzSign mode.
(Only LT640E)
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
RATIO
P
MUTE
GUIDE PORTAL INFO
INFO
- Views the information of the current
programme and screen. (Only LT640H)
- Shows or hides the information on TV
remote control buttons in EzSign mode.
(Only LT640E)
RATIO
Resizes an image.
MUTE
Mutes all sounds.
P
A
G
E
ꕍPꕌ
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
Colour buttons
These access special functions in some
menus.
(
: Red,
: Green,
: Yellow,
: Blue)
SUBTITLE
Recalls your preferred subtitle in digital mode.
OK
Selects menus or options and confirms
your input.
EXIT
Clears on-screen displays and return to
TV viewing.
FAV
Accesses your favourite programme list.
1 TELETEXT BUTTONS
These buttons are used for teletext.
OK
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
(BACK)
Returns to the previous level.
Adjusts the volume level.
FAV
PORTAL
- Displays and removes hotel interactive
menu. (Only LT640H)
- Displays the EzSign content on a TV
Screen. (Only LT640E)
Home
Selects a menu.
Clears all on-screen displays and returns
to TV viewing from any menu.
Q.VIEW
Returns to the previously viewed programme.
SAVING
EXIT
Home
1
Q.MENU
ALARM
Control buttons (ꕗ, ꕖ, ꕘ, ꕚ, ꕙ)
- Controls the MY MEDIA menus, or the
SIMPLINK compatible devices
(USB,SIMPLINK). (Only LT640H)
- Not functional when EzSign contents is on.
(Only LT640E)
SIMPLINK
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC.
Opens the SIMPLINK menu.
Q. MENU
Accesses the quick menus.
ALARM
Sets the alarm function.
REMOTE CONTROL
29
ENGLISH
ENG
ENGLISH
(Only LT65**, LT76**, LS64**)
Q.VIEW
Returns to the previously viewed
programme.
POWER
Turns the TV on or off.
ꕊ ENERGY SAVING
Adjusts the brightness of the screen to
reduce energy consumption.
ENERGY
AV MODE
INPUT
TV/
RAD
Adjusts the volume level.
SAVING
AV MODE
Selects an AV mode.
1
2
3
FAV
Accesses your favourite programme list.
INPUT
Changes the input source.
4
5
6
RATIO
Resizes an image.
TV/RAD
Selects Radio, TV and DTV programme.
7
8
9
MUTE
Mutes all sounds.
LIST
0
Q.VIEW
GUIDE
Shows programme guide.
PORTAL
Displays and removes hotel interactive
menu.
FAV
RATIO
INFO
Views the information of the current
programme and screen.
GUIDE
OK
Selects menus or options and confirms
your input.
Number buttons
Enters numbers.
LIST
Accesses the saved programme list.
PORTAL INFO
Home
1
Q.MENU
P
A
G
E
PAGE
Moves to the previous or next screen.
Colour buttons
These access special functions in some
menus.
(
: Red,
: Green,
: Yellow,
: Blue)
1 TELETEXT BUTTONS
These buttons are used for teletext.
SUBTITLE
Recalls your preferred subtitle in digital
mode.
OK
Home
Selects a menu.
Clears all on-screen displays and returns
to TV viewing from any menu.
EXIT
Clears on-screen displays and return to
TV viewing.
P
MUTE
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
(BACK)
Returns to the previous level.
ꕍPꕌ
Scrolls through the saved programmes.
EXIT
Control buttons (ꕗ, ꕖ, ꕘ, ꕚ, ꕙ)
- Controls the MY MEDIA menus, or the
SIMPLINK compatible devices
(USB,SIMPLINK).(Only LT65**, LS64**)
- Controls the Premium contents, DVR or
Smart Share menus or the SIMPLINK
compatible devices (USB or SIMPLINK or
DVR). (Only LT76**)
SIMPLINK
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC.
Opens the SIMPLINK menu.
Q. MENU
Accesses the quick menus.
30
REMOTE CONTROL
Number buttons
Enters numbers.
POWER
Turns the TV on or off.
ꕊ ENERGY SAVING
Adjusts the brightness of the screen to
reduce energy consumption.
ENERGY
AV MODE
SAVING
1.,;@ 2 abc 3 def
INPUT
Changes the input source.
MARK
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
7pqrs 8 tuv 9 wxyz
GUIDE
Shows programme guide.
LIST
PORTAL
Displays and removes hotel interactive
menu.
0
Q.VIEW
CHAR/NUM
Shifts the Character or Number.
CHAR/NUM
MARK
RATIO
INFO
Views the information of the current
programme and screen.
P
DELETE
MUTE
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
PORTAL INFO
GUIDE PORTAL
OK
Selects menus or options and confirms
your input.
OK
Home
Selects a menu.
Clears all on-screen displays and returns
to TV viewing from any menu.
Home
BACK
Returns to the previous level.
P
A
G
E
RATIO
Resizes an image.
MUTE
Mutes all sounds.
DELETE
Deletes the entered character when entering
the character on the screen keyboard.
ꕍPꕌ
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
BACK EXIT
Colour buttons
These access special functions in some
menus.
(
: Red,
: Green,
: Yellow,
: Blue)
SUBTITLE
Recalls your preferred subtitle in digital mode.
1
AD
Switches the Audio Description On or Off.
SIMPLINK
Accesses the AV devices connected with
the HDMI cable through HDMI-CEC.
Opens the SIMPLINK menu.
Adjusts the volume level.
4 ghi 5 jkl 6 mno
TV/RAD
Selects Radio, TV and DTV programme.
1 TELETEXT BUTTONS
These buttons are used for teletext.
Q.VIEW
Returns to the previously viewed programme.
TV/
RAD
AV MODE
Selects an AV mode.
EXIT
Clears on-screen displays and return to
TV viewing.
LIST
Accesses the saved programme list.
INPUT
[
ENGLISH
ENG
ENGLISH
(Only LT74**)
Q.MENU
AD
ALARM
Control buttons (ꕗ, ꕖ, ꕘ, ꕚ, ꕙ)
Controls the MY MEDIA menus, or
the SIMPLINK compatible devices
(USB,SIMPLINK).
Q. MENU
Accesses the quick menus.
ALARM
Sets the alarm function.
REMOTE CONTROL
31
ENGLISH
ENG
ENGLISH
(Only LS34**)
POWER
Turns the TV on or off.
ENERGY SAVING
Adjusts the brightness of the screen to
reduce energy consumption.
(Back)
Returns to the previous level.
ENERGY
TV/RAD
SAVING
GUIDE
INFO
RATIO
TV/RAD
Selects Radio, TV and DTV programme.
Adjusts the volume level.
FAV
Accesses your favourite programme list.
GUIDE
Shows programme guide.
INFO
Views the information of the current
programme and screen.
LIST
SIMPLINK
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC. Opens the
SIMPLINK menu.
Q.VIEW
RATIO
Resizes an image.
INPUT
Changes the input source.
Q.MENU
SETTINGS
BACK
LIST
Accesses the saved programme list.
EXIT
FAV
P
P
A
G
E
Q. MENU
Accesses the quick menus.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
OK
Selects menus or options and confirms
your input.
1
2
3
5
6
8
9
7
0
MARK
FAV
P
A
G
E
MUTE
1
OK
PAGE
Moves to the previous or next screen.
(
: Red,
: Green,
: Yellow,
SUBTITLE
Recalls your preferred subtitle in digital
mode.
1 TELETEXT BUTTONS
These buttons are used for teletext.
AD
: Blue)
Control buttons (ꕗ, ꕖ, ꕘ, ꕚ, ꕙ)
Controls the MY MEDIA menus, or
the SIMPLINK compatible devices
(USB,SIMPLINK).
MUTE
INPUT
4
MUTE
Mutes all sounds.
Colour buttons
These access special functions in some
menus.
MARK
SETTINGS
Accesses the main menus.
AV MODE
P
Scrolls through the saved programmes.
Number buttons
Enters numbers.
Q.VIEW
Returns to the previously viewed
programme.
EXIT
Clears on-screen displays and return to TV
viewing.
PR
32
TROUBLESHOOTING / SPECIFICATIONS
ENGLISH
ENG
ENGLISH
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
Make sure to turn the power off and disconnect the power cord and all other cables first.
yy
When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
yy
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
yy
detergent. Then wipe immediately with a dry cloth.
CAUTION
Avoid touching the screen at all times, as this may result in damage to the screen.
yy
Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
yy
scratches and image distortions.
Do not use any chemicals as this may damage the product.
yy
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
yy
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
The software version can be updated to improve performance of product. Customer needs to ensure that
LGE software is compatible with Customer Product Model. If needed please consult with LGE Customer
Service for guidance on procedure.
Problem
Solution
Cannot control the
TV with the remote
control.
Check the remote control sensor on the product and try again.
yy
Check if there is any obstacle between the product and the remote control.
yy
Check if the batteries are still working and properly installed (
to , to ).
yy
No image display
and no sound is
produced.
Check if the product is turned on.
yy
Check if the power cord is connected to a wall outlet.
yy
Check if there is a problem in the wall outlet by connecting other products.
yy
The TV turns off
suddenly.
Check the power control settings. The power supply may be interrupted.
yy
Check if the Auto sleep feature is activated in the Time settings.
yy
When connecting to
the PC (RGB/HDMI
DVI), ‘No signal’ or
‘Invalid Format’ is
displayed.
Turn the TV off/on using the remote control.
yy
Reconnect the RGB/HDMI cable.
yy
Restart the PC with the TV on.
yy
CAUTION FOR USING EZSIGN
33
Only LT640E
yy Do not remove a USB drive while data is being copied. It can corrupt the data and EzSign may not
work properly.
yy While loading a USB device or dongle, your TV may function slower than normal.
yy Some user-created subtitles may not work properly.
yy Some special characters are not supported in subtitles.
yy HTML tags are not supported in subtitles.
yy Subtitles in languages other than the supported languages are not available.
yy EzSign TV function does not work before completing the initial setup Wizard. Make sure to complete
the initial setup Wizard by turning on the TV after installation.
yy If the time is set according to the TV signal, it may not appeared exactly for some region. In that case,
set the time manually.
yy It is recommended that you copy files to the TV memory before playing them, as playing directly from
the USB memory for an extended period of time may cause the device to overheat.
yy In EzSign TV mode, some remote control keys may not work.
yy EzSign TV dose not support the USB HUB. It is recommended that you connect a USB device directly
to the TV without using a USB extension cable as it may not work properly.
yy It is recommended that you use EzSign TV within 8 hours per day as it is standard.
yy Refer to the EzSign Editor user guide for details.
yy EzSign TV does not support Store Demo.
yy Supported external subtitles format: *.smi/*.srt/*.sub(MicroDVD, Subviewer 1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer) /*.psb(PowerDivX)
yy Do not update the EzSign content via wireless networking and a USB drive at the same time. And do
not play content from a USB drive while updating EzSign content via wireless networking.
ENGLISH
ENG
ENGLISH
CAUTION FOR USING EZSIGN
34
SPECIFICATIONS
ENGLISH
ENG
ENGLISH
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
22LT65**
26LT64**
26LT65**
22LT650H-TA
26LT640H-TA
26LT640E-TA
26LT650H-TA
516.6 x 385.7 x 192.0
625.9 x 453.5 x 192.0
625.9 x 453.5 x 192.0
516.6 x 332.2 x 41.6
625.9 x 393.2 x 46.6
625.9 x 393.2 x 46.6
With stand(kg)
3.7
4.7
4.7
Without stand(kg)
3.1
4.1
4.1
DC 24 V, 1.4 A
AC-DC adaptor : 24 V
, 2.5
A / AC 100-240 V~ 50 / 60 Hz
DC 24 V, 1.8 A
AC-DC adaptor : 24 V
, 2.5
A / AC 100-240 V~ 50 / 60 Hz
DC 24 V, 1.8 A
AC-DC adaptor : 24 V
, 2.5
A / AC 100-240 V~ 50 / 60 Hz
32LT64**
32LT65**
32LT74**
32LT640H-TA
32LT640E-TA
32LT650H-TA
32LT740H-TA
765.6 x 535.6 x 231.9
765.6 x 535.6 x 231.9
765.6 x 535.6 x 231.9
765.6 x 475.8 x 68.5
765.6 x 475.8 x 68.5
765.6 x 475.8 x 68.5
9.2
9.2
9.2
MODELS
Dimensions With stand(mm)
(W x H x D)
Without stand(mm)
Weight
Power requirement
MODELS
Dimensions With stand(mm)
(W x H x D)
Without stand(mm)
Weight
With stand(kg)
Without stand(kg)
Power requirement
MODELS
Dimensions With stand(mm)
(W x H x D)
Without stand(mm)
Weight
8.0
AC 100-240 V~ 50 / 60 Hz
32LT76**
32LS34**
32LT760H-TA
32LS345H-TA
765.6 x 535.6 x 231.9
738.0 x 501.0 x 185.0
765.6 x 475.8 x 68.5
738.0 x 438.0 x 86.0
9.2
7.5
Without stand(kg)
8.0
6.9
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
37LT64**
37LT65**
37LT74**
37LT640H-TA
37LT640E-TA
37LT650H-TA
37LT740H-TA
867.3 x 592.8 x 231.9
867.3 x 592.8 x 231.9
867.3 x 592.8 x 231.9
867.3 x 532.8 x 68.6
867.3 x 532.8 x 68.6
867.3 x 532.8 x 68.6
11.2
11.2
11.2
MODELS
Dimensions With stand(mm)
(W x H x D)
Without stand(mm)
With stand(kg)
Without stand(kg)
Power requirement
MODELS
Dimensions With stand(mm)
(W x H x D)
Without stand(mm)
Weight
8.0
AC 100-240 V~ 50 / 60 Hz
With stand(kg)
Power requirement
Weight
8.0
AC 100-240 V~ 50 / 60 Hz
10.0
10.0
10.0
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
37LT76**
37LT760H-TA
867.3 x 592.8 x 231.9
867.3 x 532.8 x 68.6
With stand(kg)
11.2
Without stand(kg)
10.0
Power requirement
AC 100-240 V~ 50 / 60 Hz
SPECIFICATIONS
35
42LT65**
42LT74**
42LT640H-TA
42LT640E-TA
42LT650H-TA
42LT740H-TA
Dimensions With stand(mm)
(W x H x D)
Without stand(mm)
991.7 x 666.5 x 273.1
991.7 x 666.5 x 273.1
991.7 x 666.5 x 273.1
991.7 x 604.0 x 55.0
991.7 x 604.0 x 55.0
991.7 x 604.0 x 55.0
With stand(kg)
15.5
15.5
15.5
Without stand(kg)
13.5
13.5
13.5
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
42LT76**
42LS34**
Weight
Power requirement
MODELS
Dimensions With stand(mm)
(W x H x D)
Without stand(mm)
Weight
With stand(kg)
Without stand(kg)
991.7 x 604.0 x 55.0
972.0 x 571.0 x 86.0
15.5
11.8
13.5
10.7
AC 100-240 V~ 50 / 60 Hz
47LT64**
47LT65**
47LT74**
47LT640H-TA
47LT640E-TA
47LT650H-TA
47LT740H-TA
1101.0 x 728.5 x 273.1
1101.0 x 728.5 x 273.1
1101.0 x 728.5 x 273.1
1101.0 x 665.4 x 54.5
1101.0 x 665.4 x 54.5
1101.0 x 665.4 x 54.5
With stand(kg)
17.3
17.3
17.3
Without stand(kg)
15.3
15.3
15.3
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
47LT76**
55LS64**
47LT760H-TA
55LS645H-TB
1101.0 x 728.5 x 273.1
1263.0 x 822.0 x 315.0
MODELS
Dimensions With stand(mm)
(W x H x D)
Without stand(mm)
Power requirement
MODELS
Dimensions With stand(mm)
(W x H x D)
Without stand(mm)
Weight
42LS345H-TA
972.0 x 635.0 x 212.0
AC 100-240 V~ 50 / 60 Hz
Power requirement
Weight
42LT760H-TA
991.7 x 666.5 x 273.1
1101.0 x 665.4 x 54.5
1263.0 x 754.0 x 35.5
With stand(kg)
17.3
25.5
Without stand(kg)
15.3
21.9
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
ENGLISH
ENG
ENGLISH
42LT64**
MODELS
36
SPECIFICATIONS
ENGLISH
ENG
ENGLISH
Environment condition
New Zealand,
Singapore
Australia
Operating temperature
0 °C to 40 °C
Operating humidity
Less than 80 %
Storage temperature
-20 °C to 60 °C
Storage humidity
Less than 85 %
Television System
Programme
Coverage
Television System
Programme
Coverage
Indonesia,
Israel,
Myanmar, Sri
Lanka
Television System
Vietnam,
Malaysia
Television System
Programme
Coverage
Programme
Coverage
Iran, Algeria,
Tunisia, Digital
model
Television System
Analogue
model, India,
Thailand,
South Africa, --
Television System
Programme
Coverage
Programme
Coverage
External Antenna
Impedance
Digital TV
Analogue TV
DVB-T
PAL/SECAM-B/G/D/K, PAL-I
UHF 21 to 69
DVB-T
VHF 06 to 12,
UHF 27 to 69
DVB-T
UHF 21 to 69
DVB-T
VHF 6 to 12,
UHF 21 to 69
DVB-T
VHF 5 to 12,
UHF 21 to 69
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
PAL B/B
B/B : VHF/UHF 0 to 75, CATV : 2 to
44
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
-
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
-
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
75 Ω
75 Ω
ln country that Digital broadcasting regulation isn't fixed, some DTV function may not work depending on
digital broadcasting circumstances. (Only DTV)
SPECIFICATIONS
Wireless LAN module(WN8122E) specification
Standard
IEEE802.11a/b/g/n
Frequency Range
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz
Modulation
CCK / OFDM / MIMO
Output Power
(Typical)
Data rate
Antenna Gain
(Typical)
Occupied bandwidth
802.11a: 14 dBm
802.11b: 17 dBm
802.11g: 15 dBm
802.11n - 2.4GHz: 13.5 dBm
802.11n - 5GHz: 12 dBm
802.11a/g: 54 Mbps
802.11b: 11 Mbps
802.11n: 300 Mbps
2400 to 2483.5 MHz: -0.79 dBi
5150 to 5250 MHz: 0.62 dBi
5725 to 5850 MHz: 0.52 dBi
802.11a/b/g: HT20
802.11n: HT20/40
Because band channel used by the country could be different, the user can not change or adjust the
yy
operating frequency and this product is set for the regional frequency table.
ENGLISH
ENG
ENGLISH
(Only LT76**)
37
38
SPECIFICATIONS
ENGLISH
ENG
ENGLISH
HDMI/DVI-DTV supported mode
RGB-PC, HDMI/DVI-PC supported mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720x480
31.469
31.5
59.94
60
720x576
31.25
50
1280x720
37.5
44.96
45
50
59.94
60
1920x1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
Resolution
(Only 37/42/47LT64**,
37/42/47LT65**, 37/42/47LT74**,
37/42/47LT76**, 42LS34**,
55LS64**)
(Only LT64**, LT65**, LT74**, LS34**, LS64**)
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency
(Hz)
720x400
31.468
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1280x720
45
60
1280x768
47.78
59.87
1360x768
47.72
59.80
1280x1024
63.981
60.02
1920x1080
(RGB-PC)
66.587
59.93
1920x1080
(HDMI-PC)
67.5
60.00
(Only 37/42/47LT64**, 37/42/47LT65**,
37/42/47LT74**, 42LS34**, 55LS64**)
(Only LT76**)
Component port connecting information
(Only LT64**, LT65**, LT74**, LS64**)
Component ports on the
TV
Video output ports
on DVD player
Y
PB
PR
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640x350
31.468
70.09
720x400
31.469
70.08
640x480
31.469
59.94
Y
PB
PR
Y
B-Y
R-Y
800x600
37.879
60.31
Y
Cb
Cr
Y
Pb
Pr
1024x768
48.363
60.00
1152x864
54.348
60.053
1360x768
47.712
60.015
Signal
Component
1280x1024
(HDMI/DVI-PC)
63.981
60.020
480i/576i
O
1920x1080
67.5
60.00
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
(Only 37/42/47LT76**)
IR CODES
ENGLISH
ENG
ENGLISH
IR CODES
This feature is not available for all models.
yy
Code
(Hexa)
08
Function
Note
Remote control Button (Power On/Off)
95
(POWER)
ENERGY SAVING
30
0B
F0
10-19
53
1A
AV MODE
INPUT
TV/RAD
Number Key 0-9
LIST
Q.VIEW
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
02
Remote control Button
Remote control Button
03
Remote control Button
79
1E
09
00
RATIO
FAV
MUTE (DELETE)
Pꕌ(P+)
Remote control Button
Remote control Button
Remote control Button
Remote control Button
01
AB
0C
AA
43
28
5B
44
40
Pꕍ (P-)
GUIDE
PORTAL
INFO
MENU
BACK
EXIT
OK
ꕌ
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
41
07
ꕍ
<
Remote control Button
Remote control Button
06
>
Remote control Button
72
71
63
61
RED
GREEN
YELLOW
BLUE
20
TEXT
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
21
T.OPT(T.Option)
Remote control Button
39
SUBTITLE
ꕗ
Remote control Button
B1
B0
BA
8E

ꕘ
39
Remote control Button
Remote control Button

Remote control Button
Remote control Button
8F

Remote control Button
7E
45
E8
1E
91
43
SIMPLINK
Q.MENU
ALARM
MARK (CHAR/NUM)
AD
Home
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
40
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
RS-232C Configurations
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an
A/V control system) to control the product’s functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied
with the product.
RS-232C IN
(CONTROL & SERVICE)
7-Wire Configurations (Standard RS-232C cable)
RXD TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations(Not standard)
RXD TXD
GND
DTR
DSR
RTS
CTS
Type of connector;
D-Sub 9-Pin Male
1
5
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Set ID number. "Real Data Mapping".
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to
OPTION and press OK.
6
No.
9
Pin name
1
3.5V
2
RXD (Receive data)
3
TXD (Transmit data)
4
IR OUT from TV
5
GND
6
No Connection
7
+5V Power out (except for LS34**)
8
No Connection
9
+12V Power out (except for LS34**)
3 Press the Navigation buttons to scroll to SET
ID and press OK.
4 Scroll left or right to select a set ID number and
select CLOSE. The adjustment range is 1-99.
5 When you are finished, press EXIT.
EXTERNAL CONTROL DEVICE SETUP
41
yy
Baud rate: 9600 bps (UART)
yy
Data length: 8 bits
yy
Parity : None
ENGLISH
ENG
ENGLISH
Communication Parameters
yy
Stop bit: 1 bit
yy
Communication code: ASCII code
yy
Use a crossed (reverse) cable.
Command reference list
(Depending on model)
01. Power
k
02. Aspect Ratio k
03. Screen Mute k
a
c
d
DATA
(Hexadecimal)
00 to 01
(See p.43)
(See p.43)
04. Volume Mute k
e
00 to 01
05. Volume
Control
k
f
00 to 64
06. Contrast
k
g
00 to 64
07. Brightness
k
h
00 to 64
08. Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
10. Sharpness
k
k
00 to 64
11. OSD Select
k
l
00 to 01
12. Remote
Control
Lock Mode
k
m
00 to 01
COMMAND1 COMMAND2
k
k
k
DATA
COMMAND2 (Hexadecimal)
r
00 to 64
s
00 to 64
t
00 to 64
x
u
00 to 64
j
q
00 to 05
j
u
01
m
a
(See p.45)
m
b
00 to 01
m
m
c
g
Key Code
00 to 64
x
b
(See p.46)
COMMAND1
13. Treble
14. Bass
15. Balance
16. Colour
Temperature
17. Energy
Saving
18. Auto Configuration
19. Tune
Command
20. Programme
Add/Skip
21. Key
22. Control Back
Light
23. Input select
(Main Picture
Input)
yy
* Note : During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are
not executed and treated as NG.
42
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
ENGLISH
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1]
[Command 2]
[Set ID]
: First command to control the TV.(j, k, m or x)
: Second command to control the TV.
: You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment
range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1 to 99) on menu and as Hexa decimal (0x0 to 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data. Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ]
: ASCII code ‘space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data00: Illegal Code
EXTERNAL CONTROL DEVICE SETUP
43
04. Volume Mute (Command: k e)
►► To control Power On/Off of the set.
►► To control volume mute on/off.
You can also adjust mute using the MUTE button on remote
control.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To show Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’ data based on this
format, Acknowledgement data feed back presents status
about each function.
* OK Ack., Error Ack. and other message may display on the
screen when TV is power On.
05. Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
02. Aspect Ratio (Command: k c) (Main Picture
Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the Aspect
Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen (4:3)
02 : Wide screen
(16:9)
04 : Zoom
06 : Original
07 : 14:9
09 : Just Scan
0B : Full Wide
10 to 1F : Cinema Zoom 1 to 16
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3 screen aspect
ratio.
* In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 60 Hz, 1080p
24 Hz / 30 Hz / 50 Hz / 60 Hz), Component( 720p, 1080i,
1080p 50 Hz / 60 Hz) mode, Just Scan is available.
* Full Wide is supported only for DTV.
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.46.
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.46.
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
03. Screen Mute (Command: k d)
►► To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 :
01 :
10 :
Screen mute off (Picture on)
Video mute off
Screen mute on (Picture off)
Video mute on
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On Screen
Display(OSD). But, in case of Screen mute on, TV will not
display OSD.
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.46.
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
ENG
ENGLISH
01. Power (Command: k a)
44
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
ENGLISH
12. Remote control lock mode (Command: k m)
08. Colour (Command: k i)
►► To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.46.
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
►► To lock the front panel controls on the monitor and remote
control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
01 : Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this mode.
When main power is on/off, external control lock is released.
* In the standby mode, if key lock is on, TV will not turn on by
power on key of IR & Local Key.
09. Tint (Command: k j)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
* Refer to ‘Real data mapping’. See p.46.
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
13. Treble (Command: k r) (Except for LT76**)
►► To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.46.
Ack [r][ ][Set ID][ ][OK/NG][Data][x]
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64 (Except for LT76**)
Data Min : 00 to Max : 32 (Only LT76**)
* Refer to ‘Real data mapping’. See p.46.
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when controlling
remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
14. Bass (Command: k s) (Except for LT76**)
►► To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.46.
Ack [s][ ][Set ID][ ][OK/NG][Data][x]
15. Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.46.
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
19. Tune Command (Command: m a)
►► To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
►► Select channel to following physical number.
Data00 :High channel data
Data01 :Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.46.
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
17. Energy Saving (Command: j q)
►► To reduce the power consumption of the TV. You can also
adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Power Saving
Function
7
6
5
4
0
0
0
0
0
0
0
0
0
0
Level
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Description
3
2
1
0
Low
Power
0
0
0
0
Off
0
Low
Power
0
0
0
1
Minimum
0
0
Low
Power
0
0
1
0
Medium
0
0
0
Low
Power
0
0
1
1
Maximum
0
0
0
0
Low
Power
0
1
0
1
Screen Off
0
0
0
0
Low
Power
0
1
0
0
Auto
►► 'Auto' is available in TV that supports 'Intelligent Sensor'.
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
(Only LT64**, LT65**, LT76**, LS64**)
Data02 :[Anttena]
0x00 : Analog Main
0x10 : DTV Main
0x20 : Radio
[Cable]
0x80 : Analog Main
0x90 : DTV Main
0xA0 : Radio
Channel data range
Analog - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
(Only LT74**, LS34**)
Data02 : 0x00 : Analogue Main
0x10 : DTV Main
0x20 : Radio
Channel data range
Analogue - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
(Except For Sweden, Finland, Norway, Denmark,
Ireland)
Digital - Min: 00 to Max: 270F (0 to 9999)
(Only Sweden, Finland, Norway, Denmark, Ireland)
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 to Max: 7DH
20. Programme Add/Skip(Command: m b)
►► To set skip status for the current Programme.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
18. Auto Configure(Command: j u)
►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
Data 00 : Skip
01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
21. Key(Command: m c)
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - See p.39
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
ENG
ENGLISH
16. Colour Temperature (Command: x u)
45
46
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
ENGLISH
22. Control Back Light(Command: m g)
* Real data mapping
►► To control the back light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
23. Input select (Command: x b)
(Main Picture Input)
00 :
Step 0
A:
Step 10 (Set ID 10)
F:
10 :
Step 15 (Set ID 15)
Step 16 (Set ID 16)
64 :
Step 100
6E : Step 110
►► To select input source for main picture.
73 :
74 :
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data Structure
CF : Step 199
MSB
0
LSB
0
Step 115
Step 116
0
0
External Input
0
0
0
Input Number
External Input
Data
0
0
0
0
DTV
0
0
0
1
Analogue
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB
0
1
1
1
1
0
0
0
1
0
0
1
1
0
1
0
Input Number
HDMI
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
0
FE : Step 254
FF : Step 255
Record the model number and serial number
of the TV.
Refer to the label on the back cover and
quote this information to your dealer when
requiring any service.
Model :
Serial No. :
(Only DTV)
Download PDF