LG | 86TR3D-B | LG 86TR3D-B Owner’s Manual

OWNER’S MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it for future reference.
86TR3D
www.lg.com
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
2
ENGLISH
TABLE OF CONTENTS
SAFETY PRECAUTION...................3
-- Precautions In Installing the Product......................3
-- Precautions to the AC Adapter and Electrical
Power.......................................................................................5
-- Precautions In Moving the Product.........................7
-- Precautions In Using the Product.............................7
-- Mounting on a Wall..........................................................8
LICENSES........................................9
ASSEMBLY AND PREPARATION.10
-- Optional Accessories.....................................................11
-- Precaution When Using the Touch Pen..............11
-- Parts and Buttons..........................................................12
-- Connecting the Eye-Bolt Bracket..........................13
-- Installing on a Wall.........................................................13
REMOTE CONTROL..................... 15
MAKING CONNECTIONS............ 17
-- Connecting to a PC.......................................................17
-- External Device Connection......................................17
-- Using the Input List.......................................................19
TROUBLESHOOTING................... 20
PRODUCT SPECIFICATIONS....... 24
3
SAFETY PRECAUTION
Please read these safety precautions carefully before using the product.
WARNING
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or the product may be damaged.
WARNING
•• Indoor Use Only.
Precautions In Installing the Product
WARNING
•• Keep away from heat sources like electrical heaters.
-- Electrical shock, fire, malfunction, or deformation may occur.
•• Keep the packing anti-moisture material or vinyl packing out of the reach of children.
-- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
•• Do not put heavy objects on the product or sit upon it.
-- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
•• Do not leave the power or signal cable unattended on the pathway.
-- The passerby can trip or fall, which can cause electrical shock, fire, product breakdown, or injury.
•• Install the product in a neat and dry place.
-- Dust or moisture can cause electrical shock, fire or product damage.
•• If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.
-- If you continue to use without taking proper measures, electrical shock or fire can occur.
•• If you dropped the product or the case is broken, turn off the product and unplug the power cord.
-- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.
•• Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.
-- It can cause injury to human, problem to product and damage the display.
ENGLISH
WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
4
ENGLISH
•• Do not let the product fall or drop when connecting it with an external device.
-- This may cause injury and/or damage to the product.
•• When connecting it to a game device, keep a distance of four times the diagonal measurement of the screen from the
device.
-- If the product falls because of the short cable, this may cause injury and/or damage to the product.
•• Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. To use
the product for a long period of time, use a screen saver on the PC or utilize the residual image prevention function
on the product, and when the product is not used, turn off the power. Burn-in and related problems are not covered
by the warranty on this product.
•• Do NOT install this product on a wall where there is high risk of exposure to oil fumes or mist.
-- This may damage product and cause it to fall.
CAUTION
•• Make sure the product ventilation holes are not blocked. Install the product in a suitably wide place (more than 100
mm from the wall).
-- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
•• Do not block the ventilation hole of the product by a tablecloth or curtain.
-- The product can be deformed or fire can break out due to overheating inside the product.
•• Install the product on a flat and stable place that has no risk of dropping the product.
-- If the product is dropped, you may be injured or the product may be broken.
•• Install the product where no EMI occurs.
•• Keep the product away from direct sunlight.
-- The product can be damaged.
•• If you install the product in a place that does not meet the recommended conditions, this may cause serious damage
to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before
installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are
used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a
long period of time (airport and train station). failure to do so will invalidate the warranty.
•• Do not install the product in an area with poor ventilation (e.g.on a bookshelf, in a closet) or outside and avoid placing
on cushions or carpets.
•• In addition, do not install it where there are heating objects such as lighting equipment.
5
WARNING
•• If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the
power cord immediately and contact the service center.
-- Otherwise, this may cause a fire or electric shock due to damage to the product.
•• Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and dry
them before use.
-- Otherwise, this may cause a fire or electric shock.
•• Make sure to completely insert the power cord into the AC adapter.
-- If loosely connected, the poor connection may cause a fire or electric shock.
•• Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.
-- The use of non-approved products may cause a fire or electric shock.
•• When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive force.
-- The power line can be damaged, which may cause electric shock or fire.
•• Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC adapter.
Be careful not to damage the power cord or AC adapter with sharp objects.
-- Damaged power cords may cause a fire or electric shock.
•• Never disassemble, repair or modify the power cord or AC adapter.
-- This may cause a fire or electric shock.
•• Make sure to connect the power cable to the grounded current.
-- You may be electrocuted or injured.
•• Use the rated voltage only.
-- The product can be damaged, or you may be electrocuted.
•• In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very
dangerous.
-- It can cause electric shock.
•• Do not connect several extension cords, electrical appliances, or electrical heaters to a single outlet. Use a power strip
with a grounding terminal designed for exclusive use with the computer.
-- A fire can break out due to overheating.
ENGLISH
Precautions to the AC Adapter and Electrical Power
6
ENGLISH
•• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power
plug completely or wipe dust off.
-- You may be electrocuted due to excess moisture.
•• If you don’t intend to use the product for a long time, unplug the power cable from the product.
-- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
•• Fix the power cable completely.
-- If the power cable is not fixed completely, a fire can break out.
•• Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected
to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input
terminal.
-- You may be electrocuted.
•• The appliance coupler is used as the disconnect device.
•• Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily
accessible.
•• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the
unit is turned off.
CAUTION
•• Be sure to keep the outlet, AC adapter, and pins of the power plug clean from dust and etc.
-- This may cause a fire.
•• Do not unplug the power cord while the product is in use.
-- Electrical shock can damage the product.
•• Use only the power cord supplied with the unit. If you use another power cord, make sure that it is certified by the
applicable national standards when not provided by the supplier. If the power cable is faulty in any way, please contact
the manufacturer or the nearest authorized repair service provider for a replacement.
7
WARNING
•• Make sure to turn off the product.
-- You may be electrocuted or the product can be damaged.
•• Make sure to remove all cables before moving the product.
-- You may be electrocuted or the product can be damaged.
•• Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged
product can cause electric shock or fire. Contact an authorized the service center for repair.
•• Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to
carry larger apparatus. Do not press against or put stress on the front panel of the apparatus.
CAUTION
•• Do not shock the product when moving it.
-- You may be electrocuted or the product can be damaged.
•• Do not dispose the product-packing box. Use it when you move.
Precautions In Using the Product
WARNING
•• Do not disassemble, repair or modify the product at your own discretion.
-- Fire or electric shock accident can occur.
-- Contact the service center for check, calibration or repair.
•• When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.
•• Keep the product away from water.
-- Fire or electric shock accident can occur.
•• Do not shock or scratch the front and sides of the screen with metallic objects.
-- Otherwise, it may cause damage to the screen.
•• Avoid high temperatures and humidity.
ENGLISH
Precautions In Moving the Product
8
CAUTION
ENGLISH
•• Do not put or store inflammable substances near the product.
-- There is a danger of explosion or fire due to careless handling of the inflammable substances.
•• When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not
clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not
use chemicals such as benzene, paint thinners, or alcohol.)
•• Take a rest from time to time to protect your vision.
•• Keep the product clean at all times.
•• Take a comfortable and natural position when working with a product to relax the muscles.
•• Take a regular break when working with a product for a long time.
•• Do not press strongly upon the panel with a hand or sharp object such as nail, pencil, or pen, or make a scratch on it.
•• Keep the proper distance from the product.
-- Your vision may be impaired if you look at the product too closely.
•• Set the appropriate resolution and clock by referring to the User’s Guide.
-- Your vision can be impaired.
•• Use authorized detergent only when cleaning the product. (Do not use benzene, thinner, or alcohol.)
-- Product can be deformed.
•• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over
the apparatus (e.g. on shelves above the unit).
•• Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight, open fireplace, and
electric heaters.
•• Do NOT place non-rechargeable batteries in charging device.
•• Using headsets (earphones) for a long time or listening loudly can cause damage to your hearing.
•• Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much
moisture may cause staining.
WATER
CHEMICALS
•• Do not use products using high voltage around the Monitor. (e.g., a bug zapper)
-- Monitor may have malfunction as its electrical shock.
Mounting on a Wall
•• Do NOT install this product by yourself as you may injure yourself or cause damage to product. Please contact service
personnel authorised by manufacturer.
9
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD,
the Symbol, & DTS or DTS-HD and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights
Reserved.
ENGLISH
LICENSES
10
ENGLISH
ASSEMBLY AND PREPARATION
CAUTION
•• Always use genuine components to ensure safety and product performance.
•• The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
•• The accessories provided with your product may vary depending on the model or region.
•• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions.
•• SuperSign Software & Manual
-- Downloading from the LG Electronics website.
-- Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model.
•• The warranty will not cover any damage caused by using the product in an excessively dusty environment.
11
Without prior notice, optional accessories are subject to change to improve the performance of the product, and new
accessories may be added. The illustrations in this manual may differ from the actual product and accessories.
OPS kit
KT-OPSA
Screws
Card (Easy Setup Guide)
Power Cord
Connecting Cable
NOTE
•• Optional accessories are available for some models. If necessary, please purchase them separately.
•• Before you attach the OPS kit, connect the cable to the port.
Precaution When Using the Touch Pen
When the tip of the touch pen is worn as shown in the figure, replace it with a tip provided as an accessory.
ENGLISH
Optional Accessories
12
ENGLISH
Parts and Buttons
The image may be different according to the model.
Buttons
Press
Enters the
.
Press and Hold
Activates or deactivates the Screen Touch mode.
Press
Enters the
(Interactive Digital Board Application)
(Depending upon the model, this feature may not be supported.)
Press
Displays the current
Press and Hold
Activates or deactivates the
Press
Displays the current
Press and Hold
Activates or deactivates the
.
.
.
.
Adjusts the volume level.
Press
Press
Accesses the input source list.
1
Changes the input source or saves your input and exit menus.
Turns the power on or off.
1 You can use the function when you access menu control.
13
ENGLISH
Connecting the Eye-Bolt Bracket
-- The Eye-bolt bracket is designed to be used to lift the set up.
-- Attach the bracket to the product using the two screws provided.
Installing on a Wall
For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Detailed installation instructions
are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
100 mm
100 mm
100 mm
100 mm
100 mm
14
ENGLISH
To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
1 Use only screws and wall mounting brackets that conform to VESA standards.
2 Screws which are longer than standard length may damage the inside of the monitor.
3 A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for
any accidents related to the use of non-standard screws.
4 Please use VESA standard as below.
•• 785 mm and above
* Fixing screws: Diameter 8.0 mm x Pitch 1.25 mm x Length 14 mm
785 mm
CAUTION
•• Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.
•• If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount
and contact your local dealer or qualified personnel to assist with the installation.
•• Do not over tighten the screws as this may damage the monitor and void your warranty.
•• Use only screws and wall mounting brackets that meet the VESA standard. Any damage or injuries caused by misuse
or use of improper accessories are not covered by the warranty.
•• To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
(This pertains only to Australia and New Zealand.)
NOTE
•• The wall mount kit includes the installation guide and all necessary parts.
•• The wall mounting bracket is optional. You can obtain additional accessories from your local dealer.
•• The length of screws required may differ depending on the wall mount. Be sure to use the correct length.
•• For more information, please refer to the guide provided with the wall mount.
15
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to
use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
and
terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the
installation actions in reverse. The illustrations may differ from the actual accessories.
CAUTION
•• Do not mix old and new batteries, as this may damage the remote control.
•• Be sure to point the remote control toward the remote control sensor on the monitor.
•• Some features of the remote control may not be supported in certain models.
(POWER) Turns the monitor on or off.
Turns the monitor on.
Turns the monitor off.
Adjusts the brightness of the picture to reduce energy
consumption.
(INPUT) Selects the input mode.
Used for viewing 3D videos.
1/a/A Toggles between numerical and alphabetical.
Number and Alphabet buttons
Enters numerical or alphabetical characters depending upon the setting.
Deletes the entered numerical or alphabetical character.
Volume Up/Down Button Adjusts the volume.
Selects the Aspect Ratio mode.
Automatically adjusts picture position and minimizes image
instability (available for RGB input only).
(MUTE) Mutes all sounds.
A
djusts the brightness of the display. PAGE function is not
supported in this model.
",#
ENGLISH
REMOTE CONTROL
16
ENGLISH
Selects the Picture Mode.
(HOME) Activates the Launcher.
Enters the White Balance menu.
(SETTINGS) Accesses the main menus or saves your input and exit
menus.
SuperSign menu key.
Navigation Buttons Scrolls through menus or options.
Selects menus or options and confirms your input.
(BACK) Allows you to move back one step in the user interaction
function.
Quit all OSD tasks and applications.
Allows you to control various multimedia devices to enjoy
multimedia simply by using the remote control through the SimpLink
menu.
Selects the TILE Mode.
When the Picture ID number matches the Set ID
number, you can control whichever monitor you want in multi-display
format.
USB Menu Control Buttons Controls media playback.
17
You can connect various external devices to your monitor. Change the input mode and select the external device you
want to connect. For more information about external device connections, see the user manual provided with each
device.
Connecting to a PC
Some of the cables are not provided. This monitor supports the Plug and Play* feature.
*Plug and Play: a feature that enables a PC to recognize devices attached by the user without device configuration or
user intervention when powering up.
External Device Connection
Some of the cables are not provided. Connect a HD receiver, DVD, or VCR player to the monitor and select an
appropriate input mode.
For the best picture and sound quality, connecting external devices to your monitor using HDMI cables is recommended.
ENGLISH
MAKING CONNECTIONS
18
NOTE
ENGLISH
•• For the best image quality, using the monitor with HDMI connection is recommended.
•• To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a DVI-D/
HDMI cable.
•• If you turn the monitor on when the set is cold, the screen may flicker. This is normal.
•• Sometimes red, green, or blue spots may appear on the screen. This is normal.
•• Use a High Speed HDMI®/TM cable (shorter than 3 meters).
•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•• Recommended HDMI Cable Types
-- High-Speed HDMI®/TM Cable
-- High-Speed HDMI®/TM Cable with Ethernet
•• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to manually change
the default audio output to HDMI.
•• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
•• You may experience compatibility issues if you use HDMI-PC mode.
•• Make sure the power cable is disconnected.
•• If you connect a gaming device to the monitor, use the cable provided with the gaming device.
CAUTION
•• Connect the signal input cable and tighten it by turning the screws clockwise.
•• Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on the
screen.
•• Avoid displaying static images on the screen for a long period of time to prevent image burn. Use a screensaver if
possible.
•• A wireless communication device near your monitor can affect the image.
19
(HOME) •
•• RGB • HDMI1 • HDMI3/HDMI2/DVI • DISPLAYPORT • OPS
ENGLISH
Using the Input List
20
ENGLISH
TROUBLESHOOTING
No image is displayed.
Problem
Is the product power cord connected?
Does the “Invalid Format” message
appear?
Does the “No Signal” message appear?
Action
•• Check if the power cord is correctly plugged into the power outlet.
•• The signal from the PC (Graphic card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by referring
to the Specifications in this manual.
•• The signal cable between PC and product is not connected. Check the
signal cable.
•• Access the input menu to check the input signal.
The Unknown Product message appears when the product is connected.
Problem
Did you install the driver?
Action
•• Check if the Plug and Play function is supported by referring to the
graphic card user manual.
The screen image looks abnormal.
Problem
Is the screen position wrong?
The screen is displayed abnormally.
Action
•• Check if the graphic card resolution and frequency are supported by
the product. If the frequency is out of range, set to the recommended
resolution in the Control Panel Display Setting menu.
•• The proper input signal is not connected to the signal port. Connect the
signal cable that matches with the source input signal.
After-image appears on the product.
Problem
Action
After-image appears when the product is
turned off.
•• If you use a fixed image for a long time, the pixels may be damaged.
Use the screen-saver function.
•• When a dark image is displayed on the screen after an image with high
contrast (black and white or gray), this may cause image sticking. This
is normal for LCD screen products.
21
The audio function does not work.
No sound?
Sound is too dull.
Sound is too low.
Action
•• See if the audio cable is connected properly.
•• Adjust the volume.
•• See if the sound is set properly.
•• Select the appropriate equalizer sound.
•• Adjust the volume.
Screen color is abnormal.
Problem
Screen has poor color resolution (16
colors).
Screen color is unstable or mono-colored.
Do black spots appear on the screen?
Action
•• Set the number of colors to more than 24 bits (true color). Select
Control Panel - Display - Settings - Color Table menu in Windows.
•• Check the connection status of the signal cable. Or, re-insert the PC
graphic card.
•• Several pixels (red, green, white, or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. This is not a malfunction of the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Action
•• Is the Timer set?
•• Check the power control settings. Power interrupted.
ENGLISH
Problem
22
I have a problem with touch response.
ENGLISH
Problem
Touch does not respond.
Resolution
•• Remove the USB cable and connect it again in 10 seconds.
•• Check the USB cable connection.
-- This may occur when the USB cable between PC and monitor is not connected.
Check the USB cable and make it firmly connected. * Check the connection on
Windows 8.x / 10 Control Panel > System and Security > System
-- Check the number of touch-points supported under Pen and Touch.
•• Check the PC power.
-- This may occur when the PC is powered off. Make sure that your PC's power
cord is firmly plugged into a power outlet.
•• Restart your PC.
-- Touch may not respond when the system is down due to the unstable
network. Reconnect the LAN cable or restart your PC.
•• Check the signal cable connection.
-- If your PC and monitor are not connected using a signal cable, touch does not
respond. Check the signal cable connection.
•• Check the monitor power.
-- Touch may not respond when the monitor is powered off.
The location of a touch does
not correspond to the touch
coordinates.
A touch is applied to a monitor
other than the one I intended.
I cannot use 20 touch points in
Windows 8.x / 10.
•• Check if the screen is currently on.
•• Change your tablet PC settings (Windows 8.x / 10).
-- This may occur when the touch screen is not calibrated properly. Control Panel
> Hardware and Sound > Tablet PC Settings > Display > Display options >
Calibrate or Reset * For information about gestures and settings on Windows
8.x / 10, refer to the Windows Help.
•• Set the monitor as the default monitor.
-- This may occur if the monitor is not set as the default monitor when you are
using multiple monitors. Go to Control Panel > Display > Settings tab > Select
the monitor > Use this device as the primary monitor (U) > Apply (A)
•• Change your tablet PC settings (Windows 8.x / 10).
-- This may occur when the touch screen is not calibrated properly. Go to Control
Panel > Hardware and Sound > Tablet PC Settings > Display > Display options
> Calibrate or Reset
•• Make sure that you use a content that supports up to 20 touch points.
-- The content played (e.g. Flash Player, Paint, etc.) may not support 20 touch
points.
•• Remove the USB cable and connect it again in 10 seconds.
•• Run the content (e.g. Flash Player, Paint, etc.) again.
•• Restart your PC.
•• If the gap between two touch points is 20 mm or less, the touch error may
occur.
•• On the edge of the touch screen, 20 touch points may work unstably.
23
CAUTION
Recommended operating conditions
1 Change the background and the character colors using the same time interval.
ID: UPM 123
PW: ****
ID: UPM 123
PW: ****
When changing colors, using complementary colors helps to prevent image sticking.
Glass
BM
CF
BM
CF
BM
CF
CF
OC
PI
LC
PI
TFT Layers
Glass
ITO or MoTi Pixel Layer
2 Change the image using the same time
I D :interval.
UPM123
PW : ******
I D : UPM123
PW : ******
Make sure that the characters or images before changing the image remain in the same location after changing the
image.
What is image sticking?
When the LCD panel displays a static image for an extended period of time, it can cause a voltage difference between
the electrodes that operate the liquid crystals. When the voltage difference between the electrodes builds up over
time, liquid crystals have a tendency to remain aligned in one direction. During this process, a previously displayed image
remains visible. This phenomenon is referred to as image sticking.
ENGLISH
•• Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an
extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood
of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once
every 12 hours at the very minimum; if done more frequently, the prevention of image sticking is more effective.
24
ENGLISH
PRODUCT SPECIFICATIONS
The product specifications below may be changed without prior notice due to upgrade of product functions.
“ ” refers to alternating current (AC), and “
” refers to direct current (DC).
LCD screen
Screen type
Video signal
Maximum resolution
Recommended resolution
Horizontal frequency
Vertical frequency
Synchronization
Input/ Output ports
Embedded battery
Environmental
Conditions
Audio
Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
RGB/DVI-D: 1920 x 1080 @ 60 Hz
HDMI2/ HDMI3: 3840 x 2160 @ 30 Hz
HDMI1/ DisplayPort/ OPS: 3840 x 2160 @ 60 Hz
-- This may not be supported on some OS or graphic card
types.
RGB/DVI-D: 1920 x 1080 @ 60 Hz
HDMI2/ HDMI3: 3840 x 2160 @ 30 Hz
HDMI1/ DisplayPort/ OPS: 3840 x 2160 @ 60 Hz
-- This may not be supported on some OS or graphic card
types.
HDMI/ DisplayPort/ OPS(PC): 30 kHz ~ 135 kHz
DVI-D/RGB: 30 kHz ~ 83 kHz
DVI-D/ HDMI/ DisplayPort/ OPS(PC): 30 Hz ~ 60.31 Hz
RGB: 30 Hz ~ 83 Hz
Digital
HDMI IN 1, HDMI IN 2, HDMI IN 3, DP IN, DVI-D IN, RGB IN, USB 3.0 IN, USB 2.0 IN, LAN,
AUDIO IN, RS-232C IN/OUT, TOUCH USB, OPS USB 2.0 IN
Applied
Operating Temperature
0 °C to 40 °C
Operating Humidity
10 % to 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
5 % to 85 %
Input Sensitivity
0.7 Vrms
* Touch Screen
OS (Operating
System)
Windows 8.x / 10
20 Points
Space between touches : at least 20 mm or more
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W (R + L)
0.7 Vrms
6Ω
25
86TR3D
Pixel Pitch
0.4935 mm (H) X 0.4935 mm (V)
Power
Rated Voltage
Power Consumption
AC 100-240 V~ 50/60 Hz 3.8 A
On Mode: 330 W (Typ.)
Sleep Mode ≤ 0.5 W
Dimensions (Width x
Height x Depth) /
Weight
Off Mode: ≤ 0.5 W
2026.9 mm x 1180.3 mm x 96.8 mm / 92.7 kg
Wireless module(LGSBW41)Specifications
Wireless LAN (IEEE 802.11a/b/g/n)
Frequency range (MHz)
Output power (Max.)
2400 to 2483.5
16 dBm
5150 to 5250
16 dBm
5725 to 5850 (Not for EU)
11.5 dBm
Bluetooth
Frequency range (MHz)
Output power (Max.)
2400 to 2483.5
10 dBm
•• As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is
configured for the regional frequency table.
•• For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm
between the device and the body.
(Only Nigeria)
Connection and use of this communications
equipment is permitted by the Nigerian
Communications Commission
ENGLISH
LCD Panel
26
(Only HongKong)
ENGLISH
Wireless module(LGSBW41)Specifications
Wireless LAN
Standard
IEEE 802.11a/b/g/n
Bluetooth
Standard
Bluetooth
2400 to 2483.5
Frequency range (MHz)
5150 to 5250
Frequency range (MHz)
2400 to 2483.5
5725 to 5850
802.11a: 13 dBm
802.11b: 15 dBm
Output power (Max.)
802.11g: 14 dBm
Output power (Max.)
10 dBm or Lower
802.11n - 2.4GHz: 16 dBm
802.11n - 5GHz: 16 dBm
•• As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is
configured for the regional frequency table.
•• For consideration of the user, this device should be installed and operated with a minimum distance of
20 cm between the device and the body.
27
RGB (PC) Support mode
Horizontal frequency (kHz)
Vertical frequency (Hz)
720 X 400
31.468
70.8
640 x 480
31.469
59.94
60.317
800 x 600
37.879
1024 x 768
48.363
60.0
1280 x 720
44.772
59.855
1600 x 900
60
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
Remark
HDMI/ DVI-D/ DisplayPort/ OPS (PC) Support Mode
Resolution
Horizontal frequency (kHz)
Vertical frequency (Hz)
800 x 600
37.879
60.317
1024 x 768
48.363
60.0
1280 x 720
44.772
59.855
Remark
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
3840 x 2160
67.5
30
HDMI, DisplayPort, OPS
3840 x 2160
135
60
HDMI1, DisplayPort, OPS
ENGLISH
Resolution
28
HDMI/ DisplayPort/ OPS (DTV) Support Mode
ENGLISH
Resolution
Horizontal frequency (kHz)
Vertical frequency (Hz)
480/60P
31.5
60
576/50P
31.25
50
720/50P
37.5
50
720/60P
45
60
1080/50i
28.1
50
60
Remark
1080/60i
33.75
1080/50P
56.25
50
1080/60P
67.432
59.94
1080/60P
67.5
60
2160/30P
67.5
30
HDMI, DisplayPort, OPS
2160/50P
112.5
50
HDMI1, DisplayPort, OPS
2160/60P
135
60
HDMI1, DisplayPort, OPS
Multi-screen (PC) Support mode
Resolution
Horizontal frequency (kHz)
Vertical frequency (Hz)
1280 x 720
44.772
59.855
Remark
1920 x 1080
67.5
60
3840 x 2160
67.5
30
HDMI, DisplayPort,
OPS PIP (Main)
Resolution
Horizontal frequency (kHz)
Vertical frequency (Hz)
Remark
720/50P
37.5
50
720/60P
45
60
1080/50P
56.25
50
1080/60P
67.5
60
2160/30P
67.5
30
Multi-screen (DTV) Support Mode
HDMI, DisplayPort,
OPS PIP (Main)
29
NOTE
•• Vertical frequency: The product display functions by the screen image changing dozens of times every second like a
fluorescent lamp. The vertical frequency or refresh rate is the number of image displays per second. The unit is Hz.
•• Horizontal frequency: The horizontal interval is the time taken to display one horizontal line. When 1 is divided by
the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
ENGLISH
•• Resolutions available for the Input Label option in HDMI/ DVI-D/ DISPLAYPORT/ OPS input modes.
-- PC resolutions: 1280 x 720 / 60 Hz, 1920 x 1080 / 60 Hz, 3840 x 2160 / 60Hz.
-- DTV resolutions: 480p, 720p, 1080p and 2160p
Make sure to read the Safety Precautions before using the
product.
The model and serial numbers of the SET are located on the
back and one side of the SET. Record it below should you ever
need service.
MODEL
SERIAL
Temporary noise is normal when powering ON or OFF this
device.
Download PDF

advertising