LG | TD-C801H | LG TD-C801H Owner’s Manual

OWNER’S MANUAL
LG HEAT PUMP DRYER
Please read this manual carefully before operating
your dryer and retain it for future reference.
TD-C801H
MFL67653035
www.lg.com
Features
Ultra Big Capacity Drum
The ultra big capacity drum on this LG dryer allows you to
dry more clothes, saving time!
Energy
Lower Energy Consumption
LG Heat Pump dryers use less energy than conventional dryers due
to an optimized heat exchanger and self cleaning technology.
This LG Heat Pump dryer has been designed with energy saving in
mind.
Reduced Noise Levels
We have reduced the operating noise of this LG dryer by using
innovative sound-absorbing and noise-screening technologies,
making it quieter than conventional dryers.
Ease of Use
The wide, electronically controlled LED display on this machine
is very easy to use. Simply select the cycle you require
and your LG dryer will do the rest. Smart Diagnosis™ is available.
Contents
Safety Instructions ...............3
Using Tag On function
Installation Instructions ........6
Tag On Cycle Download ....................21
Laundry Stats .....................................21
Tag On Cycle Set ...............................21
Appearance & Design .........10
Operating Your Dryer ..........11
Caring for Your Dryer..........22
Additional Functions...........17
Additional Tips for
Efficient Use.........................24
Before using the Tag On
function
Troubleshooting Guide .......27
Turning on the NFC function of the
smart phone .......................................19
The Tag On guide ..............................20
2
Technical Data ....................30
Disposal Notice ...................31
Safety Instructions
For your safety, the information in this manual must be followed to minimise the risk of fire or
explosion, electric shock, and to prevent property damage, serious injury or death. This product
must be used for domestic household purposes only. it is not intended for use in commercial or
mobile applications.
WARNING
• Serious injury or death may occur when not observing the following rules.
• This product must only be used for its intended purpose. The instructions provided in this
manual must be adhered in order to minimise the risk of damage to the unit and serious
injury.
• Repairs or internal maintenance required by the dryer must only be carried out by a
qualified technical person. If the power cord is damaged, it must only be replaced with the
same specified cord, by the manufacturer or an authorised service provider.
WARNING
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
• The appliance must not be installed behind a lockable door, a sliding door or a door
with a hinge on the opposite side to that of the tumble dryer, in such a way that a full
opening of the tumble dryer door is restricted.
WARNING - To avoid a fire
Do not wash or dry clothes or items that have any contaminants of flammable solvents or
substances. Do not clean the product with, or expose it to flammable substances.
Hazards
• Before plugging in the power cord, make sure the cord and the power outlet is earthed
and connected to a circuit breaker.
No earthing may cause a malfunction or an electric shock.
• Do not plug into an adaptor. Do not use with an extension lead.
Abnormal heating of a power board, adaptor, or an extension lead may cause a
fire.
• Do not remove the top plate when installing the dryer.
• Do not modify this product.
No doing so may cause a malfunction, fire or electric shock.
• Keep the dryer away from ovens, naked flames, or any other flammable objects.
They may cause a fire or parts of the dryer to melt.
• Do not use a damaged power cord or place heavy objects on the cord.
A damaged power cord may cause fire or electric shock.
3
Safety Instructions
• Do not touch the plug or switch with wet hands.
Doing so may cause an electric shock.
• Grasp from the plug when removing from the power outlet. Do not disconnect the power
plug cord by pulling it from the cord.
Doing so may cause damage of cord resulting in fire or electric shock.
• Wipe dirt and stains from the power cord and insert the plug firmly into the socket.
Dirt and poor connections may cause fire.
• Do not use if power cord, plug or socket is damaged.
Doing so may cause fire or electric shock.
• Do not install or store the dryer outdoors, or in an outdoor sheltered area where it will be
exposed to the weather.
Doing so may cause fire, electric shock or malfunction.
• Do not use an extension cord or an adaptor to connect to the power.
Doing so may cause fire or electric shock.
• Do not splash water on to the dryer.
Doing so may cause fire or electric shock.
• Unplug the power cord when cleaning the dryer or when it is not in use.
Water or dirt may cause an electric shock.
• Do not allow children or pets to play on or inside the dryer.
• Keep pets away from the dryer.
Pets may damage the dryer, or may receive an electric shock.
• Do not press buttons using sharp implements such as knives and screwdrivers.
Doing so may damage the dryer or cause electric shock.
• Do not place flammable items near the dryer.
Doing so may create toxic gases, cause parts damage, a fire or explosion.
• Before the appliance is removed from service or discarded, unplug the appliance then
disassemble the door and cut off the power cord to prevent misuse.
Not doing so may cause a serious injury.
• The packaging is not a toy. Dispose of it safely after removing it from the Dryer.
To avoid the possibility of suffocation, keep the packaging away from pets, babies
and children.
• Care should be taken when connecting the dryer to a power source or outlet so that
water cannot be splashed onto the connection and that the connection is not subject to
moisture.
Not doing so may may cause an electric shock, a fire, or a malfunction.
• Oil-affected items which have been spotted or soaked with vegetable of cooking oil can
ignite spontaneously, especially when exposed to heat sources such as in a tumble
dryer. The items become warm, causing oxidation reaction in the oil. Oxidation creates
heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling,
stacking or storing oil-affected items can prevent heat from escaping and so create a fire
hazard.
4
Safety Instructions
• Items that have been soiled with substances such as cooking oil, acetone, alcohol,
petrol, kerosene, spot removers, turpentine, waxes ,wax removers and hair care products
should be washed in hot water with an extra amount of detergent before being dried in
the tumble dryer. This will reduce, but not eliminate the hazard.
Not doing so may cause spontaneous combustion leading to an explosion and
fire.
• Items made of foam, rubber, plastic, or other heat-sensitive fabrics (such as bathroom
rugs, nonslip mats or raincoats) must not be dried in a tumble dryer on a heat setting.
• Items such as foam rubber (latex foam), shower caps, waterproof nappy covers, and
textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should
not be dried in the tumble dryer.
Doing so may cause spontaneous combustion leading to an explosion and fire.
• If the tumble dryer is installed on a carpet, the dryer may be damaged due to poor air
ventilation.
A lack of air circulation or installing the unit on carpet may cause spontaneous
combustion leading to an explosion and fire.
• Fabric softeners, or similar products, should be used as specified by the fabric softener
instructions. Incorrect usage of softening agents during a wash can cause hazardous
repercussions to the clothes and unit damage when they are dried in the dryer.
• Failure to follow all of the safety warnings in this manual could result in property damage,
personal injury or death. Do not use or store the dryer outdoors or in any sheltered
outdoor location where it is subject to weathering.
• The tumble dryer is not to be used if industrial chemicals have been used for cleaning
• Remove all objects from pockets such as lighters and matches.
• Oil-affected items can ignite spontaneously, especially when exposed to heat sources
such as in a tumble dryer. The items become warm, causing an oxidation reaction in the
oil. Oxidation create heat. If the heat cannot escape, the items can become hot enough
to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping
and so create a fire hazard.
• If it is unavoidable that fabrics that contain vegetable or cooking oil or have been
contaminated by hair care products be placed in a tumble dryer they should first be
washed in hot water with extra detergent – this will reduce, but not eliminate, the hazard.
5
Installation Instructions
The following instructions will guide you through the initial steps of setting up your dryer.
Please note that every section of this manual provides important information regarding the
preparation and use of your dryer, and it is important that you review this entire manual
before proceeding with any installation or use. Be sure to observe all listed warnings and
cautions. These installation instructions are intended for use by qualified installers. Read
these installation instructions completely and carefully.
Safety Information
Risk of Injury
The dryer is very heavy so you shouldn’t
try to lift it alone.
Do not lift the dryer by grasping any of the
protruding parts, e.g. the jog dial or the
door, they may break off.
Risk of Falling or Tripping Up
Ensure there are no loose hoses or
cables.
Check the dryer for damage that may
have occurred during transportation.
Do not connect the dryer if it has visible
signs of damage.
If you are not confident, contact your local
LG agent. Always empty the dryer
completely before transporting it.
Your dryer should not be located near to a
gas hob, cooker, heater or grill, as flames
from the burners could damage your dryer.
If you use this dryer near or stacked on top
of your washing machine, separate main
plugs and sockets must be used for each
appliance. Do not use a 2-way adaptor or
extension lead.
You can stack the dryer on top of your
washing machine to save space. A stacking
kit is available from your local appliance
specialist. The stacking kit provided (some
models only) is suitable for LG Front load
washers only.
■ Stacking Installation Instructions
Your LG dryer can be placed on top of a front loading washing machine and securely fixed
with a stacking kit (see following page for instructions). This installation must be conducted
by an experienced installer to ensure it has been installed correctly.
An installer will ensure you have the correct stacking kit for your model of washing
machine and will ensure it is firmly fixed. For these reasons, expert fitting is essential.
CAUTION
CAUTION Concerning the power cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
frayed power cords are dangerous. Any of these could result in and electric shock or
fire.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, trapped in a door, or walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
6
Installation Instructions
Stacking Kit
In order to stack this dryer to an LG front
load washer, an LG stacking kit is required.
Dryer
Washer
This dryer may only be stacked on top of an
LG washer. DO NOT attempt to stack this
dryer on any other washer, as damage,
injury or property damage could result.
Washer Top plate size
Shape
and
assembly
direction
21.7 inch
(550mm)
WARNING
• Incorrect installation can cause serious
accidents.
• The weight of the dryer and the height
of installation makes the stacking
procedure too complex for one person.
This procedure should be performed by
2 or more experienced service
personnel.
• The dryer is not suitable for a built-in
installation. Please do not install as a
built-in appliance. Do not use or store
in any outdoor location.
• Do not operate if the dryer is
disassembled.
3. Align the stacking kit holes and the rear
cover holes.
3-1) 23.6 inch(600mm)
23.6 inch
(600mm)
Installation Procedure
1. Place the LG dryer on the LG washing
machine.
2. Remove the two screws from the bottom
of the rear cover on each side as
illustrated below.
3-2) 21.7 inch(550mm)
• Fasten the 2 screws that were removed
earlier from dryer to the stacking bracket.
• Use 4 screws supplied in the accessory
box [0.6inch(16mm)] to assemble the
staking bracket to the rear of the washer.
• The procedure for the opposite side will be
the same.
7
Installation Instructions
Earthing Instructions
This appliance must be earthed. In the
event of malfunction or breakdown, earthing
will reduce the risk of electric shock by
providing a path of least resistance for the
electric current.
This appliance is equipped with an earthed
cord and an earthing plug. The plug must be
plugged into an appropriate outlet that is
properly installed and earthed in
accordance with local standards.
Additional Grounding Procedure
Some countries may require a separate
ground. In such cases, the required
accessory ground wire, clamp and screw
must be purchased separately.
Condensed Water Drain
This appliance can be plumbed directly into
the mains waste with the adaptor supplied.
Condensed water will drain away. A
plumber will be required.
WARNING
The dryer should not be installed next to
a refrigeration appliance.
Do not install the Heat Pump dryer
next to an appliance such as a
refrigerator, oven or stove etc. which
can cause poor drying performance
and programme duration, and
adversely affect the proper
functioning of the compressor. The
Heat Pump dryer performs best at a
room temperature of 23°C
8
NOTE
- For better drying performance,
please keep the rear of product
away from wall.
- Do not install the dryer where there
is a risk of frost or dust.
• The tumble dryer may not be able
to operate properly or may be
damaged by freezing of condensed
water in the pump and drain hose.
WARNING
Avoid installing the product around a
heat source.
The rear side of the dryer must be well
ventilated.
If not, this may cause a malfunction.
Installation Instructions
■ Level the Dryer
1. Levelling the dryer prevents unnecessary
noise and vibration. Place your dryer on a
solid, level floor.
Place the dryer in an area free from
flammable materials, condensation and
freezing conditions.
2. If the dryer is not properly level, adjust
the front levelling feet as necessary.
Turn them clockwise to raise and
counter-clockwise to lower until the dryer
no longer wobbles, both front-to-back,
side-to-side and corner-to-corner.
Adjustable Feet
Dryer is raised
Adjustable
Feet
Dryer is lowered
Adjustable
Feet
Diagonal Check
When pushing down the edges of the
machine, the machine should not move up
and down at all (Please check both
directions).
If the machine rocks when pushing the
machine top plate diagonally, adjust the feet
again.
9
Appearance & Design
■ Product Layout
- TD-C801H
Control Panel
Water Container
Door
Air Ventilation Grill
■ Control Panel
Smart Diagnosis™ function is
available only for the products
with a Smart Diagnosis™ mark.
Options
• Time Delay
• Anti Crease
• Favorite
• Buzzer
Additional
programme
Power
10
Start/Pause
Cycle
Selector
•
• Spin Speed
(refer to pg.18)
• Option
• Dry Level
(*Child Lock)
• Drum Light
•
Operating Your Dryer
■ Cycle Selection Table
Sensor Dry Cycle
Cycle
Cotton
Mixed
Fabric
Easy
care
Laundry Type
Detail
Drying
Level
Towels, dressing gowns and
bed linen
For thick and quilted fabrics
Extra
Terry towels, tea towels,
towels and bed linen
For thick and quilted fabrics that
do not need to be ironed
Very
Bath towels, tea towels,
underwear and cotton socks
For fabrics that do not need to be
ironed
Cupboard
Sheets, pillowcase and
towels
For fabrics that do not need to be
ironed
Light
Bed linen, table linen, towels,
T-shirts and polo shirts
For fabrics that need to be ironed
Iron
Bed linen, table linen,
tracksuits, anoraks and
blankets
For thick and quilted fabrics that
do not need to be ironed
Very
Shirts and blouses
For fabrics that do not need to be
ironed
Cupboard
Trousers, dresses, skirts and
blouses
For fabrics that need to be ironed
Iron
Shirts, T-shirts, trousers,
under-wear and socks
For polyamide, acrylic, and
polyester that do not need to be
ironed
Cupboard
Shirts, T-shirts, under-wear,
anoraks and socks
For polyamide, acrylic, polyester
that do need to be ironed
Iron
11
Operating Your Dryer
Sensor Dry Cycle
Cycle
Laundry Type
Bulky Item Bed clothes, sheets
Detail
Drying
Level
For bulky items
-
Jeans
Jeans and colour fading
garments.
For jeans which do not need to be
ironed
-
Cotton
Soft
T-shirts, pillowcase, and
towels
For cotton fabrics which do not
need to be ironed
-
Sports
Wear
Soccer kit and training wear
For polyester material
-
Linen and towels, excluding
For small loads of suitable fabrics
Quick Dry fabrics applied to delicate,
sports wear, bulky Item cycle. with short drying times
-
Delicate
Silk, fine fabrics and lingerie
For fabrics that are heat-sensitive
like synthetic fabrics
-
Wool
Wool
For wool fabrics
-
Timed Drying Cycle
Rack Dry
Silk, wool, delicate lingerie
Refresh clothes without tumble
drying
-
Cool Air
All fabrics that need
refreshing
Tumbles without heat
-
Warm Air
Bath towels, bath robes,
dishcloth and quilted fabrics
made of acrylic
Small Items & damp clothing
Everyday items suitable for heat
drying
-
CAUTION
If the load is less than 1kg, please use the “Warm Air” Cycle in the Timed Drying
Programme.
Wool items should be dried using the “Wool” Cycle and heat-sensitive fabrics including
silk, underwear and lingerie should be dried using the “Delicate” Cycle. Please comply
with the recommended laundry load when you select your desired cycle - found on
12
Operating Your Dryer
■ Please read before using your LG dryer for the first time
After removing the packaging, please carry out the following checks to ensure the LG
dryer is correctly installed and ready for use. (See installation instructions.)
1. Check the dryer is well balanced by using a spirit level. If not, adjust the feet of the LG
dryer until the machine is balanced.
2. Check the water container, filter, control panel and drum to make sure everything is in
place.
3. Set the machine to dry for 5 minutes in any Timed Drying programme to warm up the drum.
4. Open the door between loads the first few times you use the machine to allow any
odours from the interior of the LG dryer to disperse.
NOTE
The final part of a tumble dryer cycle occurs without heat (cool down cycle) so
that the items are left at a temperature to ensure that the items will not be
damaged.
Turn the
power on.
1. Turn the power on.
First, press the ‘‘Power’’ button. The
indicator light above the button will
become illuminated indicating that the
machine is all set to run.
2. Open the door.
3. Check the filter and water container
are clean.
The filter is inside the door rim or in the
back of the door. It needs to be cleaned
before and after drying.
Open the door and check the filter is
clean. If not, please clean it referring to
page 21. Also check if the water
container need to be emptied for optimum
drying results.
4. Place laundry into the drum after
sorting.
The clothes should be sorted by fabric
type and dryness level and all the strings
and belts of clothes should be well tied
and fixed before being put into the drum.
Push the laundry to the back to keep it
away from the door seal.
If not, the door seal and clothes may be
damaged.
Open the
Door.
Glass Door Opaque Door
Check the filter and empty the water tank.
CAUTION
Do not dry unwashed items in the
tumble dryer.
13
Operating Your Dryer
5. Close the door.
Before you close the door, make sure
fabrics are placed well inside and that
foreign objects, especially flammable
ones, are not caught around door.
CAUTION
Be careful not to trap laundry between
the door and rubber seal.
Glass Door Opaque Door
6. Select the desired drying cycle.
You can choose a cycle by turning the
cycle selector knob until the required
cycle is indicated.
If you press Start/Pause button without
choosing a cycle, the dryer will proceed
with the Cupboard cycle. Please refer to
Cycle Selection table (page 11,12) for
detailed information.
Select the
desired
cycle.
7. Press the start button.
You will hear the drum begin to rotate.
Take out
the laundry.
8. After the cycle has finished, open the
door and remove the laundry.
CAUTION
Be careful! The drum inside could still be
hot.
(Operation time may vary depending on
your cycle selection or options in addition to
the level of moisture in the clothes.)
14
Operating Your Dryer
NOTE
The final part of a tumble dryer cycle
occurs without heat (cool down
cycle) to ensure that the items are left
at a temperature that will not
damage them.
Clean the
filter.
(Replace the
filter if it is
damaged.)
9. Clean the filter and empty water
container.
The filter should be cleaned after each
load.
10. Turn off the dryer.
Press the ‘‘Power’’ button.
CAUTION
- Take care if using a vacuum cleaner to
clean the filter, as it is easily damaged
and torn. If there is a residue build up
on the filter, lightly scrub the filter with
a soft brush to remove.
- If you need to open the door while the
dryer is operating, please press the
Start/Pause button first, wait until the
drum completely stops and then open
the door.
WARNING
Never stop a tumble dryer before the
end of the drying cycle unless all items
are quickly removed and spread out so
that the heat is dissipated.
CAUTION
It must not be used for purposes other
than those for which it was designed.
This product is not designed for
commercial applications.
15
Operating Your Dryer
■ Rack Dry
( depending on the model )
The dryer rack is placed inside the dryer as
seen in the picture below. Remove and
discard packing material before use.
The Rack Dry is designed for use with items
that must be dried flat, without tumbling,
including sweaters and delicate fabrics.
To use the Rack Dry :
1. Open the door.
NOTE
Check the filter and remove any lint
accumulated from items dried on the
rack.
1. Insert the
wire pin in
to the drum
center.
2. Ensure the filter is clean, then refit it.
3. Place the drying rack over the bottom
of the dryer door opening.
Reset the rack on the dryer back
centre holder.
Push down on the frame front to
secure it over the filter.
4. Place wet items on top of the rack.
Allow space around items for air to
circulate.
The rack does not move, but the drum
will rotate.
5. Close the door.
6. Turn power on and select Rack Dry.
16
2. Place
delicate
fabrics or
sports
shoes onto
the rack.
Additional Functions
Option
buttons
Power
Cycle
Selector
Start/Pause
Power
• Press the Power button to turn power on
and off.
• To cancel the Time Delay function, the
power button should be pressed.
Cycle Selector
• Cycles can be selected according to the
laundry type.
• The lamp will light up to indicate the
selected cycle.
Additional programme
option buttons
Additional programme Options.
• Use these buttons to select the desired
options for the selected cycle.
Options
• Allows you to select additional options and
the selected option indicator will then light
up when selected.
Start/Pause
• This Start/Pause button is used to start the
dry cycle or pause the dry cycle.
• To stop the cycle temporarily, press the
Start/Pause button.
• If the drying is not resumed within 4
minutes from when it was paused, the
Dryer will then turn off automatically.
17
Additional Functions
■ Time Delay
■ Option
You can use the Time Delay option to
Hand Iron
delay the finishing time of drying cycle.
This function retains a higher level of moisture
Maximum Time Delay is 19 hours.
in garments than the standard Iron dry level.
Minimum Time Delay is 3 hours.
NOTE
1. Turn the dryer on.
2. Select a cycle then press the Time Delay button.
Cycle
Dry Level
Option
3. Set time delay hour(s) by pressing the “ ”, “ ” Cotton
Hand Iron
button.
Iron
can be
Mixed Fabric
4. Press Start/Pause button.
selected
Easy Care
■ Anti-Crease
The Anti Crease option prevents creases
that are formed when the laundry is not
unloaded promptly at the end of the drying
cycle. When Anti Crease is selected, the
dryer repeatedly runs and pauses, giving
you 2 hours to unload the laundry. If the
door is opened during the Anti Crease
the remaining time and the Anti Crease
function will be automatically cancelled.
■ Favorite
Favorite option allows you to store a
customised dry cycle for future use.
1. Turn the dryer on.
2. Select a cycle.
3. Select any additional options or
programmes.. (Anti-Crease, Spin speed etc.)
4. Press and hold the Favorite option button for
3 seconds.
The Favorite option is now stored for future
use. To reuse the stored cycle, select
Favorite option and press the Start/Pause.
■ Drum Light
Whilst the dryer is running it is possible to
see inside the drum if you select the Drum
Light function.
■ Spin speed
Damp Dry Beep
This function lets you know when the clothes
are ready for ironing based on the Dry level
selected, by emitting a beeping sound.
NOTE
Cycle
Cotton
Mixed Fabric
Easy Care
Dry Level
Extra / Very
Cupboard / Light
Damp Dry
Cupboard
selected
Option
Very / Cupboard Beep can be
■ Child Lock (
&
)
To prevent Children from altering or interrupting
the drying operation. Press and hold the Dry
Level button for about 3 seconds.
You will see “
” indicated on the display
when it is activated.
A“
” indication will appear on the LED
window.
- All the controls except for the Child Lock and
Power buttons will be disabled.
- Child Lock will remain activated even after the
end of the cycle.
This option can assist in reducing the drying time
in some cases by selecting what Spin speed the
clothes were subjected to during the wash.
NOTE
(Default option is normal)
To
turn
the Child Lock off, press and hold
- High : When the spin speed of the washing
the Dry Level button for about 3 seconds.
machine was set to more than 1,200 rpm.
- Normal : When the spin speed of the washing
machine was set to less than 1,000 rpm. ■ Buzzer
Spin RPM is based on an LG Front Load
This button allows you to change the Beep
washing machine.
levels to High, Low or Off.
18
Before using the Tag On function
• The Tag On function allows you to conveniently use the LG SmartDiagnosis™ and Cycle
Download features to communicate with your appliance from your own smart phone.
• To use the Tag On function:
1. Download the LG Smart Laundry & DW Global App to your smart phone.
2. Turn on the NFC (Near Field Communication) function in your smart phone.
• The Tag On function can only be used with most smart phones equipped with the NFC
function and based on the Android operating system (OS).
■ Turning on the NFC function of the smart phone
1. Enter the "Settings" menu of the smart phone and
select "Share & Connect" or "More ..." under
"WIRELESS & NETWORKS".
2. Set the "NFC" and "Direct Android Beam" to ON.
3. Check "Use Read and Write/P2P receive".
NOTE
• Depending on the smart phone manufacturer and
Android OS version, the NFC activation process
may differ.
• Refer to the manual of your smart phone for
details.
19
Before using the Tag On function
■ The Tag On guide
Tag On position
•
Tag On:
Look for the Tag On icon next to the LED screen on
the control panel.
This is where you position your smart phone when
using the Tag On function with the LG
SmartDiagnosis™ and Cycle Download features of
the LG Smart Laundry & DW Global App.
• When you use the Tag On function, position your
smart phone so that the inbuilt NFC antenna in the
back of your smart phone matches the position of the
Tag On icon on the appliance.
If you do not know the position of your NFC antenna,
move your smart phone very slightly in a circular
motion until the application verifies the connection.
• Because of the characteristics of NFC, if the transmission distance is too far, or if there is
a metal sticker or a protective case on the phone, transmission will not be good. In some
cases, NFC-equipped phones may be unable to transmit successfully.
• Press
in the LG Smart Laundry & DW Global App for a more detailed guide on how
to use the Tag On function.
20
Using Tag On function
■ Tag On Cycle Download
This function will allow you to choose an additional cycle (available from a list in the LG Smart
Laundry & DW Global app) and download the cycle to the “Download Cycle” option on the front
of the dryer control panel.
To use this function, simply select “Tag On Cycle Download” in the LG Smart Laundry & DW
Global app (refer to “Before using the Tag On Function” in this manual) and then select your
desired cycle from the list, then simply hold your phone next to “Tag On” icon on the front of the
dryer and your desired cycle data will be downloaded to the dryer “Download Cycle” option on
the front control panel.
NOTE
• If the dryer is currently in the middle of any cycle, you cannot transfer a new cycle to the
“Download Cycle” option on the front of the dryer control panel, an error message “Notice- the
appliance is running” will be displayed on the application.
• After the cycle data has been downloaded to the dryer from the LG Smart Laundry & DW
Global app, the “Download Cycle” option will memorise and retain the cycle data, even if the
dryer is switched off then back on at the power point.
• After the cycle data has been downloaded to the dryer from the LG Smart Laundry & DW
Global app, the cycle will not start automatically, you can start the cycle by pressing the
“Start/Pause” button on the front of the dryer control panel.
• As the dryer is not able to display the additional cycles anywhere on the front control panel,
you can check what cycle is currently in use by selecting "Tag On Cycle Download", and
tapping the refresh symbol. The app will then prompt you to "Tag on Target Area"
■ Laundry Stats
This function will display the 3 below points of data from the dryer:• The history of the 10 most recently used cycles (in no specific order)
• The most “frequently used cycle”
• The last cycle that was used or that is currently in use
To use this function simply select “Laundry Stats” in the LG Smart Laundry & DW Global app
and the above cycle data will be displayed.
NOTE
• If dryer is turned off from the power point and then back on, the dryer will still memorise
and retain all 3 above points of cycle data.
• If the unit is currently in the middle of any cycle, you can still use the “Laundry Stats”
function of the LG Smart Laundry & DW Global app.
■ Tag On Cycle Set
This function will explain in more detail, the recommended applications for some certain cycles
that are available on the front of the dryer control panel. (excluding “Download Cycle”).
To use this function simply select the “Tag On Cycle Set” on your LG Smart Laundry & DW
Global app, then select your applicable cycle, then simply hold your phone up to “Tag On” icon
of the front of the dryer and the desired cycle will automatically start.
NOTE
• If the unit is currently in the middle of a cycle, you cannot set a “Tag On Cycle Set”, an
error message “Notice- the appliance is running” will be displayed on the application.
21
Caring for Your Dryer
Caring for your Dryer is Very Important
It’s not difficult to care for your dryer, but it is important
that you do care for it, to get the best out of it.
Clean Filter
Clean the filter after each use and check it before
each use. It should also be cleaned if the ‘‘Clean
Filter’’ light becomes illuminated and the buzzer
sounds whilst the dryer is in operation.
Cleaning or emptying the filter will reduce drying
times and energy consumption and lengthen the
dryer life.
CAUTION
- The lint filter must be cleaned after each use.
- Lint must not to be allowed to accumulate
around the tumble dryer.
- Remove any excess Lint from around the
filter opening when it is removed for cleaning.
1. Open the
door.
2. Pull the filter
out.
3. Clean the filter
by using a
vacuum
cleaner or
rinsing under
the tap.
4. Replace the
filter.
Push the filter
all the way
down to avoid
interference
with the door.
5. Close the door.
CAUTION
- After washing the filter, please dry
thoroughly.
- Lint must not be left to accumulate
in the dryer.
NOTE
If the filter is not fitted to the dryer,
you can not operate the dryer.
Empty Water Container
Condensed water is collected in the water
container.
Empty the water container after every use.
Not doing so will affect the drying performance.
If the water container is full, the “Empty Water”
lamp glows and the buzzer sounds while the
dryer is operating. If this should occur, the water
container needs to be emptied within the next
hour.
1. Press the
Start/Pause button
to pause the
operation, then pull
out the water
container.
2. Empty water
container in the
sink.
3. Push it back into
the dryer.
4. Press the
Start/Pause button
to resume the
drying operation.
NOTE
A high atmospheric temperature and
a small room may both increase
drying time as well as energy
consumption.
WARNING
Do not drink the condensed water.
CAUTION
If the laundry is not spun at a high speed
during washing, energy consumption
and drying time will increase.
In some instances, the LED window may
display “
” (Empty water symbol) and
the dryer may stop because the water
container is full.
If “Clean Filter” symbol is displayed during the operation, clean the filter promptly.
1.Cool the dryer down and follow the above steps.
2.Press the Start/Pause button to resume the cycle after cleaning and refitting the filter.
22
Caring for Your Dryer
■ Ventilation Grill and Cool Air
Inlet Grill
Unplug the power, then vacuum the front
ventilation grill 3-4 times a
year to make sure there is no build up of lint
or dirt that may cause improper air flow.
3. Then join an
additional
condensing
drain hose to
the joiner and
run it to the
drain or sink.
(refer to pg.25)
■ Moisture Sensor
NOTE
- Warm air is vented outward through
the ventilation grill.
- Adequate room ventilation should
be provided to avoid the back flow
of gases into the room from units
burning other fuels, such as open
fires.
The device senses the moisture level of the
laundry during operation, which means it
must be cleaned regularly to remove any
build-up of lime scale on the surface of the
sensor.
Wipe the sensors just behind the filter inside
the drum along their length to clean.
(as illustrated)
■ Condensed Water Drain-out
Normally, condensed water is pumped up to
the water container where water is collected
until manually emptied. Water can also be
drained out directly to a mains drain or sink.
especially when the dryer is stacked on top
of a washing machine.
With a connecting kit for the mains drain
hose, simply change the water path and
re-route to the drainage facility as below:
1. Access the
drain
connecting
joiner at the
rear.
2. Remove
the hose
that is
connected
to the water
container.
23
Additional Tips for Efficient Use
■ Drying Guide
Capacity of
dryer
CYCLE
Cotton
Mixed
Fabric
Easy Care
Normal
High
Extra
8 kg
180 min
170 min
Very
8 kg
170 min
160 min
Cupboard
Light
8 kg
8 kg
160 min
150 min
150 min
140 min
Iron
8 kg
140 min
130 min
Very
4 kg
80 min
70 min
Cupboard
4 kg
70 min
60 min
Iron
4 kg
60 min
40 min
Cupboard
4 kg
70 min
40 min
Iron
4 kg
60 min
Bulky Item
24
Display Drying Time
(Including Cooling Time)
30 min
2 kg
120 min
Jean
3 kg
110 min
Cotton Soft
4.5 kg
210 min
Sports Wear
2 kg
50 min
Quick Dry
3 kg
50 min
Delicate
1.5 kg
48 min
Wool
1 kg
29 min
Additional Tips for Efficient Use
Woollens
Dry woollens on “wool’’ cycle. Be sure to
follow fabric care label symbols first. Wool
may not be completely dried from the cycle,
so don't repeat drying. Pull woollens to their
original shape and dry them flat.
Woven and Loopknit Materials
Some woven and loopknit materials may
shrink, depending on quality.
Permanent Press and Synthetics
Do not overload your dryer. Take out
permanent press items as soon as the dryer
stops to reduce creases.
Baby Clothes and Night Gowns
Always check the manufacturer’s
instructions.
Below are fabric care labels.
Symbols
Instructions
Dry
Tumble dry
Permanent Press /
Crease resistant
Gentle / Delicate
Do not tumble dry
Do not dry
High heating
Medium heating
Low heating
Rubber and Plastics
Do not dry any items made from or
containing rubber or plastics such as:
a) Aprons, Bibs and Chair Covers
b) Curtains and Table Cloths
c) Bathmats
No heat / air
Fibreglass
Do not dry fibreglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time you
use the dryer and irritate your skin.
In the shade
Line Dry / hang to dry
Drip dry
Dry flat
Fabric Care Labels
Clothes have their own wash care labels, so
drying according to the wash care label is
recommended.
In addition, the laundry must be sorted
according to size and type of fabric.
For the best drying performance and most
efficient energy usage, do not overload the
dryer.
25
Additional Tips for Efficient Use
■ Spare Parts
■ Accessory Parts
Spare parts that are required under the
terms of the warranty are provided free of
charge. If the warranty has expired then
spare parts must be purchased from the
service centre.
• Accessories available for this product
( depending on the model )
1. Condensing Drain Hose and Hose
Holder (Supplied with some models
only but can be purchased separately)
■ Disposal of the Dryer
It is requested that you dispose of your
dryer safely to protect children and others
from possible injury.
The door, lid and other protruding parts
must be removed and the power cord
should be cut off before safe disposal.
2. Dryer Rack (Supplied with some
models only but can be purchased
separately)
■ Service Contact
If there is a problem with your dryer, first
consult the Trouble Shooting Guide. If you
cannot find the error and you are unable to
resolve the problem, please contact the
Customer Call Centre.
A Customer Service representative will ask
you the following questions:
1. Name, address and postcode
2. Phone number
3. Description of problem
4. Model number and serial number of your
dryer
5. Date of Purchase
3. Stacking Kit (Supplied with some
models only but can be purchased
separately)
Holder : 2EA, Screw : 4EA
• The stacking kit can be used for LG Front
Load Washers with a top plate size of
550mm and 600mm.
If stacking is needed, you must stack
the dryer upon an LG washing
machine.
26
Troubleshooting Guide
■ Troubleshooting Tips
To save you time and money, the following page may help answer your questions before
calling for service.
Issue
What to do
Dryer won’t run
1. Check dryer is plugged in.
2. Check "Start/Pause" button is pressed.
3. Check door is properly closed.
4. Check room temperature is not below 5°C.
5. Check if the fuse is blown or the circuit breaker is
tripped and reset them. (Caution : electric dryers
generally use two fuses or breakers) After emptying
the water container and cleaning filter during
operation, you must press the Start/Pause button, then
the dryer will operate again.
It takes a long time to dry
1. Filter should be cleaned after each load.
2. Check water container is emptied.
3. Select correct cycle setting for fabric type.
4. Check air ventilation grill or rear vents of dryer are not
obstructed.
5. Check clothes are not excessively wet.
6. Check the dryer is not overloaded.
Dryer is operating but
“Time Left” in the display
doesn’t change.
This is not a malfunction.
Drying time is estimated and will recalculate throughout
the cycle as it senses the dryness of the load.
Check filter is clean.
Clothes are covered in fluff 1. Check the filter is clean.
2. Check all the items in the dryer are clean.
3. Check all the laundry has been correctly sorted by
fabric type.
4. Check the dryer is not overloaded.
5. Check if there are any paper, tissues or other
degradable items amongst the laundry and remove.
The drying time is
not consistent
The drying time for a load will vary depending on the
heat setting, the size of the load, the type of fabrics, the
wetness of the clothes and the condition of the filter.
Water is leaking
Check the water hose or drain hose is properly
connected.
The clothes are creased
Check the dryer is not overloaded. Try a shorter drying
time and remove items whilst they still retain a slight
amount of moisture. Use the anti-crease option.
The garments have shrunk
To avoid shrinkage, please follow the care and use
instructions for your garment, as some fabrics shrink
naturally when washed and should not be placed in a dryer.
Please check the filter is in the dryer.
27
Troubleshooting Guide
■ Error Messages
•
: The door must be closed and the Start/Pause button must be pressed for reoperation. If error message continues to occur, unplug the power cord and
call the service centre for advice.
•
,
,
,
: If error message continues to occur, unplug the power cord and call the service
centre for advice.
■ Drum light does not work
• Contact the customer service centre.
28
Troubleshooting Guide
NOTE
Smart Diagnosis™ function is
available only for the products with a
Smart Diagnosis™ mark. Should you
have an analog phone, the Smart
Diagnosis™ function may not
operate.
■ Using Smart Diagnosis™
• Only use this feature when instructed to do
so by the call centre. The transmission
sounds similar to a fax machine, and so
has no meaning except to the call centre.
• Smart Diagnosis™ cannot be activated if
the dryer does not power up. If this
happens, then troubleshooting must be
done without Smart Diagnosis™.
If you experience problems with your dryer,
call the customer information centre. Follow
the call centre consultant's instructions, and
do the following steps when requested:
1. Press the Power button to turn on the
dryer. Do not press any other buttons or
turn the cycle selector knob.
Max. 10 mm
3. Press and hold the “ (More)” button for
three seconds, while holding the
mouthpiece of your phone close to the
"Smart Diagnosis™" icon and Power
button.
4. Keep the phone in place until the tone
transmission has finished.
The display will count down the time.
• For best results, do not move the phone
while the tones are being transmitted.
• If the call centre consultant is not able to
get an accurate recording of the data,
you may be asked to try again.
5. Once the countdown is over and the tones
have stopped, resume your conversation
with the call centre consultant, who will
then be able to assist you using the
information transmitted for analysis during
your call to the customer information
centre.
NOTE
2. When instructed to do so by the call
centre, place the mouthpiece of your
phone close to the "Smart Diagnosis™"
icon and Power
button.
“Smart Diagnosis is a troubleshooting
feature designed to assist, not replace,
the traditional method of troubleshooting
through service calls. The effectiveness
of this feature depends upon various
factors, including, but not limited to, the
reception of the phone being used for
transmission, any external noise that
may be present during the transmission,
and the acoustics of the room where the
machine is located. LG does not
guarantee that Smart Diagnosis would
accurately troubleshoot any given
issue". if the dryer has a power problem,
the Smart Diagnosis will not work.
29
Technical Data
850 mm
640 mm
600 mm
■ Electrical Requirements
Volts
Australia,
230 New Zealand 240 V~
■ Ventilation Requirement
Hertz
Watts
50 Hz
800
Ensure you connect the dryer to an outlet
with the correct operating voltage. The
ratings plate on your dryer shows you what
the voltage should be.
■ Max. capacity : 8 kg
■ Allowable temperature : 5 ~ 35°C
■ Depth with door open : 1090mm
30
Net Weight : 53.2 kg, Opaque Door
54.6 kg, Glass(Cr) Door
Alcove or
under counter
Ensure an air
flow of 112
cu.ft./min
is available to
circulate
through the
dryer
Closet
This unit must not be
installed in a cupboard
or enclosure with
inadequate ventilation
clearances, and where
by it needs to be
closed during the
dryers operation.
Disposal notice
Disposal of your old appliance
1. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local City
Council.
2. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human
health.
3. For more detailed information about disposal of your old
appliance, please contact your local City Council, waste disposal
service or the shop where you purchased the product.
• Information of fluorinated greenhouse gases used as refrigerant of
this dryer
Chemical name
Composition of Gases
Total GWP (kg CO2 –eq)
R – 134a
100% HFC – 134a
1300
NOTE
• When disposing of the appliance, cut off the mains cable, destroy the plug and
remove the door to prevent children from being trapped inside.
31
Download PDF

advertising