LG | LD-12AS1 | LG LD-12AS1 Owner’s Manual

DISHWASHER
OWNER'S MANUAL
MODEL
:
LD-12AS1 / LD-12AW2
Please read this manual
carefully
before
operating your
dishwasher. Retain it for future reference.
CONTENTS
SAFETY AND CAUTION
3
INSTALLATION INSTRUCTION
4
PARTS NAME
8
FUNCTION OF CONTROL BUTTON
9
HOW TO USE AND OPERATE
10
WASH OPTIONS
15
PROGRAMS
16
CHECK AND CARE
18
TROUBLE SHOOTING GUIDE
19
SPECIFICATIONS
SAFETY AND CAUTION
?
Please read this manual
?
before
dishwasher.
the dishwasher for the first time.
using
?
carefully
?
This manual contains very important
notes regarding the installation, use and
maintenance of your dishwasher.
The manufacturer can not be
?
responsible for problems caused by
ignoring these safety and caution
This dishwasher is
household
?
?
Do not
use
designed for normal
the dishwasher for industrial
?
and commercial use, or other purpose.
Electrical connection must be in
Electrical
safety
rating label.
only guaranteed
is
avoid
regulations. (Please
extension cable
or
Only
be placed in
of
(Please
temperature
decorated, etc.)
65˚C,
setting.
can
?
If the hot water
?
?
the dishwasher must be
hazard.
a
use
?
electric shock.
Do not allow children to
?
Do not
operate the
dishwasher.
push
down
or
door when the door
sit
on
the inner
It may
failure of your
opened.
the deformation
or
appliance is fitted with a safety
function that automatically stops the
operation of the dishwasher when it is
exposed to heavy disturbance on its
This
appliance
the plug is
must be
positioned
so
accessible.
Controls may be locked using "child
lock" mode to prevent from starting
The
accidentally.
appliance is not intended for use by
Young
children should be
ensure
that
they
do not
Do not insert
anything
parts and noise.
Do not get the body
It may be scalded
Do not spray water on the appliance. It
may cause the failure of electric parts or
?
This
supervised
play with the
to
such
as
coin into
the vapor vent.
It may cause the failure of mechonical
any kinds of solvent in your
dishwasher. They may cause an
explosion or fire.
cause
avoid
a
appliance.
not be maintained
connected to cold water.
Do not
its service agent or
qualified person in order to
or
young children or infirm persons
without supervision.
are non-
metal
away from children.
If the hot water exceeds 65˚C, adjust the
water heater
?
similar
dishwasher
?
Keep detergents
below
washing.
The detergent for dishwasher should be
used for normal operation.
If power supply cord is damaged, it
must only be replaced by the
that
?
an
cord.)
the dishwasher.
heartresistant,
?
use
?
suitable household utensils should
avoid utensils; that
?
detergent for hand
mains.
when the earth system of your house is
in accordance with the related local
?
the
use.
accordance with the
?
use
manufacturer
instructions.
?
Do not
3
by
near
to vapor vent.
hot water.
INSTALLATION INSTRUCTION
Step1:
Step2:
PREPARE CUPBOARD OPENING
PREPARE ELECTRICAL WIRING
1
This dishwasher is
size shown
2
Select
a
as
designed to
CAUTION
fit to the
For
below.
location
as
close to sink
personal safety,
remove
house fuse
or
open circuit breaker before installation. Do not
use an extension cord or adapter plug with
as
this
possible for easy connections to water and
drain lines.
appliance.
Electrical and
grounding
comply with the national
code/provincial and municipal code
connections must
electrical
and/or other local codes.
3
The dishwasher should not be installed
more
than 3 meters from sink for proper
1
drainage.
This
appliance must be supplied with
rating voltage and hertz as shown
correct
4
If dishwasher is to be installed in
a
on
corner,
instruction manual, and connected to
minimum 5cm of space is required
between the washer and an adjacent
individual, properly grounded branch
circuit, protected by minimum 15 amp
cabinet
circuit breaker
a
or a
an
wall.
Wiring
2
or
must be 2
time
delay
wires with
fuse.
ground.
The power point must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher side. A
correctly rated,
wired
and earthed extension cord may be used
if necessary. (See Fig. A)
600
820-870
min
3
75
100
qualified
600-605
Cut out for
hoses and electrical
cables on either side.
(appox. 100 x 75)
chipboard
is
adjacent
to or above the
dishwasher, it should be sealed with a
waterproofing paint or sealant to prevent
swelling
due to steam.
4
Electrician. No other
appliance
plug
should be connected to the
same
outlet
or
plug.
Unit:mm
If bare
The power point must be correctly
earthed, if in doubt, have it checked by a
by
a
double
adapter
similar
INSTALLATION INSTRUCTION
Step3:
Step5:
PREPARE DISHWASHER FOR
INSTALL THE DISHWASHER IN
INSTALLATION
CUPBOARD
the dishwasher
1
Lay
2
Adjust
the
cabinet
as
legs
on
its back.
to the needed
shown
by figure
1
height
of
#1.
Before
sliding the dishwasher into the
cupboard opening, all necessary final
height adjustment and balancing
adjustment should be done using the
spanner.
2
Slide the dishwasher into the cabinet
opening carefully.
Adjust
kinked
screw
figure
#1
or
exceeded.
600mm
Step4:
CONNECT DRAIN HOSE TO
DISHWASHER
1
820m
Turn the drain connector at the back of
dishwasher to drain direction
2
Connect the drain hose to the drain
connector
Make
sure
that the
drain hose inside the cabinet is not
tightly using hose clamp.
Water
Hose
Clamp
supply
Drain Hose
5
600~605mm
INSTALLATION INSTRUCTION
Step6:
DRAIN LINE CONNECTION
1
If the end of drain hose does not fit to
When the drain hose is connected to
the drain line,
separate stand pipe, it is essential that
air tight connection is made.
of rubber
piece
connector(not supplied) that must be
resistant to heat and detergent and may
be obtained from a plumbing shop.
2
There
are
shown in
use a
2
typical connections
Figure A, B.
Refer to
a
an
Fig.B
as
Air Tight
Connection
70mMin./1ax 30mMin.
The recommended methods of drain hose
connection must be adhered to within the
of Water Board
Authority. Several
other options are commonly used outside
this area and local council or plumbers
areas
should be able to advise of these.
Radius
40 mm
Min.
The "S" trap spigot must be drilled out
cleanly and free of obstruction to its
Standpipe
40
mm
diametre min.
maximum internal diameter, if used for
drainage.
Fig.
B
:
Drainage
connection
-
stand
To prevent siphoning, one of the following
instruction methods must be followed:
When the
drainage
hose is connected to
a
sink "s" trap or waste disposal unit, the
hose must be looped up to the underside
Drain Hose Extension
Extend drain Hose
as
shown below.
of the bench top and secured.
Sink
70mMin. 10 mMax.
Max.
Copper pipe
Ø20mm flared
30mMin.
Power
Cord
at drain hose
and other end
if required
70mMin./1ax
Radius
40
mm
Min.
Drain hose extension or 16-20mm inside Ørubber
hose able to withstand 90˚C hot water
Radius 40mm min
Fig.
mm
Drain Hose
Water Hose
30mMin.
200
A
6
pipe.
INSTALLATION INSTRUCTION
Step7:
Step8:
WATER SUPPLY CONNECTION
FINAL CHECK AND
ASSEMBLING
1
Connect the water
supply pipe
to the
water valve in front of dishwasher
shown in
2
1
as
Securely hand tighten supply hose to
supply.
Plug power cord into an earthed power
point and switch on.
water
figure.
connecting, the sealing tape or
sealing compound should be used to
When
2
avoid water leaks.
Make
or
sure
sharply
that the line is not kinked
conditions.
bent.
Shut off Valve
Operate the dishwasher through one
cycle (Quick cycle is recommended)
to check for water leak and operating
To Dishwasher
7
PARTS NAME
6
1
12
7
16
8
2
13
17
3
9
14
4
18
10
5
15
19
11
11.
Adjust Leg
2. Control Panel
1.
12.
Upper
3. Door Handle
13.
Cutlery
4. Front Cover
14.
Detergent
5. Lower Cover
15.
Vapor
6. Process Monitor
16.
Upper Spray
7. Power Switch
17. Lower
8. Inlet valve ASM
18. Filter ASM
9. Drain Hose Connector
19. Lower Rack
Vapor
vent
Rack
Rack
& Rinse Aid
Vent Cover
Spray
Arm
Arm
10. Power Cord
Accessories
Inlet Hose
8
Drain Hose
Dispenser
FUNCTION OF CONTROL BUTTON
DELAY START
HALF LOAD
BUTTON
If you want to
?
delay
the
press this button before
pressing start button.
?
Pressing
the
delay
will increase time
time
by
1 hour.
?
The
be
start time can
delay
adjusted from
1 hour to
19 hours.
If you have
?
start of selected program,
load for
use
?
a
small
?
washing,
POWER SWITCH
Crystal
BUTTON
Special
Half Load
special
operating, press this
button first for power on.
After operating, this
For
?
program for
washing of
this function.
Selecting
China &
a
?
dishes
shuts off flow to the
like china
lower spray arm
and reduces water
crystal glasses.
button
automatically
safety
and energy saving.
If case of irregular surge
switches off for
or
?
and energy
disturbances to the
consumption
machine, the power may
be
automatically
safety.
turned
off for
Auto Power off
Delay Start
Rinse
Child Lock
REMAINING
TIME
?
?
Indication of
Used to lock
?
?
or
remaining
unlock the control
time
buttons to prevent all
the setting from being
Self
message
changed by a child.
For locking/unlocking,
press Delay Start and
display
Turbo Rinse button
diagnosis
error
PROGRAM
CHILD LOCK
and
?
simultaneously.
When power is
on, program is
automatically
set
to normal.
?Ifyouwantto
change the
RINSE-
START/PAUSE
PLUS
BUTTON
?
each
With each press,
Start and Pause is
press,
rinse-
repeated during
operation.
With
plus
?
is
added.
?
If the machine
remains in Pause
program, press the
button and set the
mode for 10
program you want
is
to.
turned off.
9
minutes, the power
automatically
HOW TO USE AND OPERATE
1.
Loading your
For the best
Dishwasher
washing performance,
it is
Take
important that the dishwasher is loaded
according to instructions.
Before loading items into the dishwasher,
you must scrape off large particles in
particular non soluble items such as bones,
toothpicks, pips, etc.
loading the dishwasher,
following general guidelines:
When
Position
crockery
care
not to obstruct the rotation
of the spray arms, and that
do not prevent the detergent
from
larger items
dispenser lid
opening.
observe the
such that water will
contact all surfaces.
Deep based items should be placed
angle to help water run off and dry
properly.
Items with burnt
soaked
prior
on
scraps should be
loading
to
at an
in the dishwasher.
3.
Using
Cutlery
the
Cutlery
Basket
should be mixed within each
section of the
nesting
the
cutlery
basket to prevent
of similar items. Place the
cover
cutlery
with the handles down. The
cover
hinged
clipped away from the
basket if you choose not to use them.
can
be
in
Take
care
sharp
2.
Loading
the Lower Rack
The lower basket is best loaded with dinner
plates,
and
soup bowls, dishes, pots, pans, lids
the grill tray.
even
Plates should be
facing
positioned upright
the center of the rack.
Pots, pans and large dishes
upside
and
must be turned
down.
10
and
when
items.
loading
and
unloading
HOW TO USE AND OPERATE
4.
Loading
the
Upper Rack
The upper rack is best loaded with more
delicate items, small plates, long cutlery,
cups, glasses and dishwasher safe plastic
items. Plates should be positioned upwards
and
facing the front of the rack.
Cups, glasses and bowls must be positioned
upside down.
Extra cups or cooking utensils can be laid
the fold down cup racks which may also
provide support for long stem glasses.
on
Take
spray
5.
care
arm
not to obstruct the rotation of the
under the upper rack.
Adjusting
the
Upper
Rack
Non Dishwasher Safe Items
The combination of high water temperatures and
dishwasher detergent may damage particular
Your upper rack can be raised or lowered to
cater for different size of crockery. Before
items, therefore
adjusting, ensure rack is empty of
all crockery. Remove the rail pegs in front
of the rack runners by pulling back, then
chosen
position and replace the pegs.
Fitting the rack back into the standard
position reduces the space between the
upper and lower rack. After adjusting,
arm
do not recommend
using
the
following:
Copper or anodized aluminum
Hand painted silver or gold leaf crockery
slide the rack out. Re insert the rack in the
check that the spray
we
dishwasher to wash the
Wood
Iron
or
bone handled utensils
or non
rust
proof utensils
Plastic items which
is free to rotate.
11
are
not
dishwasher safe.
HOW TO USE AND OPERATE
6.
?
Adding Detergent
Dispenser
Detergent
must be
put into the detergent
chamber before
starting every program
the
Rinse
& Hold.
except
?
Use
only
the
detergent
intended for
household dishwashers.
washing detergent
because the foam
Push latch to open
(Ordinary hand-
should not be used,
can
interfere with proper
operation.)
?
Chambers hold
?
The amount of detergent
15g
and
program. Refer to the
depends on
guide table.
the
PROGRAM
AMOUNT OF DETERGENT
Soak
25g
Heavy
25g
Normal
20g
Eco
15g
Quick
10g
Rinse/Hold
?
Place proper
detergent into this
25g.
After the
detergent
No
is
compartment
Detergent
Use
detergent
supplied,
?
The chamber lid remains open after
detergent
washing detergent
because the foam
chamber lid should be closed.
The
the
intended for
household dishwashers.
the
?
only
Information
(Ordinary hand-
should not be used,
can
interfere with proper
operation.)
detergent is dispensed automatically
during the operation.
WARNING
The
detergent
detergent and
operation.
used is
a
special
Dishwasher
like all household chemicals
should be treated
poison and kept out
of reach of children. At completion of each
wash program, the detergent compartment
should be checked and any remaining
detergent removed.
12
as a
HOW TO USE AND OPERATE
7.
Adding Rinse
Dispenser
To fill the Rinse Aid
Aid
chamber,
rotate the
round cap counter clockwise and remove.
Fill the container to the maximum level
with
a
during
Rinse Aid, then
good quality
and lock the cap.
The Rinse Aid is
replace
automatically dispensed
cycle.
the final rinse
Depending
on
the
dosage setting
and the
number of washes, the chamber may need
only to be topped up once per month. The
rinse aid level
can
be checked
by looking
at
the indicator window when the dishwasher
door is
fully
open.
Black indicates sufficient Rinse Aid
O Clear indicates Rinse Aid
The
dosage setting
most installations.
required
is
factory set to suit
If, after washing, you
Rinse-Aid
Indicator
Adjust Lever
(Rinse)
notice
on
cloudy spots, streaks or water marks
your glassware, it may be necessary
increase the
setting.
To do so,
remove
the
cap and rotate the indicator arrow to a
higher setting then replace the cap If the
.
smeared
Rinse Aid Information
there is foam present
glasses
on the bottom of the glass or the bottom of
are
the machine. Select
or
a
lower
setting.
Rinse Aid is necessary in order to get spot
and streak free dishes as well as improved
drying. Using the correct amount will
improve wash performance. However, using
too much can produce excess foam leading
to possible water leaks.
13
HOW TO USE AND OPERATE
8. Fold down dividers.
Fold-down dividers at the back of the rack
be lowered to
improve stacking
can
of pots and
pans.
14
WASH OPTIONS
Before select the wash program, press the power button. Then Normal program
will be selected with remaining time on display window. To change the program,
press the button of the program
Start
After
or
or
as you
want.
Child Lock
Pause Button
selecting wash program, press the Start
Pause button to start the wash cycle.
To reduce the
a
possibility
of children
starting
the dishwasher when unattended, the child
If at any time you want to interrupt the
washing cycle, press the Start or Pause button.
lock feature
can
be selected.
Your dishwasher will then pause. Press the
Start or Pause button again to re-start
For
dishwasher.
simultaneously.
locking or unlocking, press "Delay
Start" and "Turbo Rinse" buttons
Progress Indicators
Turbo-Rinse
Once you select a program, the progress
indicators light(Wash, Rinse, Dry). When press
the Start or Pause button to start the program,
When you want to rinse dishes with higher
temperature for sanitation, use this function
the current stage
the water temperature goes up to 77˚C when
light
at any program. If you choose this
will blink.
function,
rinsing.
Delay Start
This function enables the wash
anywhere
cycle
Half Load(LD-12AS1
to start
between 1 to 19 hours later.
Select the program that you want
If you have small load for
function.
by using
the program button.
Set the delay time you want
Selecting
the
by pressing
"Delay Start" button. The delay start time
increased by 1 hour for each pressing.
energy
Press the start button. Then the program will
be started
automatically after the delayed
display has expired.
time shown in the
Rinse Plus
when you select any program, the
Rinse process is done only two ( 1 normal
Normally
rinse +1
+
1
heating rinse) or three (2 normal rinse
heating rinse) times according to selected
program. But if you want to rinse more, you
can use this function. As you select +1, +2 the
normal rinse will be done
one or
two times
more.
15
washing,
use
this
Half Load shuts off flow to the
lower spray
is
Model)
arm
and reduces water and
consumption.
PROGRAMS
Model
:
LD-12AS1
Wash
P rogram
Drain
Pre
wash
Rinse
Dry
SOAK
Main
wash
45C
70C
70C
70C
70 C
60C
65C
50C
50C
40C
45C
Rinse 1
Rinse 2
Rinse3
20(min)
Soak
Heavy
Normal
Eco
Quick
Rinse & Hold
Heavy
This program is for
including
Soak Wash
Wash
heavily
soiled loads
This program is for very heavily soiled
loads including pots, pans and casserole
pots, pans and casserole dishes.
dishes which may have
dry
food residue.
Normal Wash
This program is for
everyday loads.
normally
Quick Wash
soiled
This program is for that quick wash of
lightly soiled recently used dishes and
Eco Wash
This program is for
loads.
cutlery.
light
soiled
everyday
16
PROGRAMS
Model
:
LD-12AW2
Wash
P rogram
Drain
Pre
wash
Rinse
Dry
SOAK
Main
wash
45C
70C
70C
70C
70 C
60C
65C
50C
50C
40C
45C
40C
45C
Rinse 1
Rinse 2
Rinse3
20(min)
Soak
Heavy
Normal
Eco
Quick
Rinse & Hold
China &
Crystal
Heavy
This program is for
including
Soak Wash
Wash
heavily
soiled loads
This program is for very heavily soiled
loads including pots, pans and casserole
pots, pans and casserole dishes.
dishes which may have
Normal Wash
This program is for
everyday loads.
normally
food residue.
Quick Wash
soiled
This program is for that quick wash of
lightly soiled recently used dishes and
Eco Wash
This program is for
loads.
dry
cutlery.
light
soiled
China &
everyday
17
Crystal
This program is for that wash of special
dishes like china or crystal glasses.
CHECK AND CARE
To prevent troubles and poor operating, it is
arms at intervals.
important
to check and care the
filters and spray
Upper Spray Arm
Filters
?
Remove the lower rack first.
?
?
Take the filters out with filter handle.
?
?
Lift out the
?
Clean them if necessary.
?
Replace
coarse
filter and middle filter
them in the
reverse
Pull the upper rack forwards.
Check that the water jet holes
blocked
by
food
When necessary to clean,
by unscrewing the nut.
?
Clean the spray
reverse order.
Coarse filter
Middle filter
Upper spray
fine filter
Lower
?
Check that the water jet holes
blocked
?
Spray Arm
by
food
are
not
remove
the
particles.
When necessary to clean,
arm
by pulling
?
up.
Clean the spray
down.
arm
and
replace
it
pulling
18
arm
not
remove
the
particles.
?
order.
are
arm
and
replace
arm
it in the
TROUBLE SHOOTING GUIDE
If
a
problem
occurs
in your machine, call for service.
Before you call for service, check the below instructions to
problem can be solved by yourself first.
Possible Causes
Problem
The
on
whether the
see
do not
lamps
Fuse blown
?
The
?
Door is not
?
The start button is not
?
The drain hose is kinked.
code)
?
The filter is
on.
The machine does not start.
pumped
inserted in the socket.
Plug
?
when the power switch
Water is not
is not
?
come
away.
properly
or
electricity
circuit breaker
of the house
fully
tripped.
was
cut
off.
closed.
pressed.
(The display show
"
"
The
display
shows
"
"
code
?The machine is inclined.
The
display
shows
"
"
code
?
Water is not
?
The
mounting of spray arms is blocked by food
particles. (Clean the holes of the spray arm)
?
The amount of
?
Salt is exhausted in the salt container.
?
The salt container cap is not
?
Too much Rinse-aid
?
Too little Rinse-aid
?
Incorrect amount of
The spray
does not rotate
arms
smoothly
White
deposits
are
dish washer after
Streaks
Dry
are
results
on
the
washing.
left
on
are
not
Washing results
satisfactory.
left
glassware
satisfactory.
are
not
?
?
?
?
?
clogged. (Clean
the
filter)
supplied. (Water tap
detergent
or
is not
opened)
rinse-aid set
securely
incorrectly.
screwed
dispensed.
dispensed.
detergent.
incorrectly arranged or overloaded.
Filters are clogged.
Water jet holes of spray arms blocked.
Spray arms' rotation obstructed by utensils.
Utensils
Unsuitable program selected.
19
on.
600mm
600mm
850mm
Capacity
12 Place
Dimension
600x600x850mm(WxDxH)
Weight
52
Power
Supply
See
rating
label
Power
Consumption
See
rating
label
Water
Consumption
See
rating
label
Water Feed Pressure
P/No.: 3828ED7001A
settings
kg
30~800kPa
Download PDF

advertising