LG | LD-1204M1 | LG LD-1204W1 Owner’s Manual

DISHWASHER
OWNER'S MANUAL
MODEL : LD-1204W1 / LD-1204M1
Please read this manual carefully before operating your
dishwasher. Retain it for future reference.
CONTENTS
SAFETY AND CAUTION
3
INSTALLATION INSTRUCTION
5
PARTS NAME
9
FUNCTION OF CONTROL BUTTON
10
HOW TO USE AND OPERATE
11
WASH OPTIONS
16
PROGRAMS
17
CHECK AND CARE
18
TROUBLE SHOOTING GUIDE
19
SPECIFICATIONS
SAFETY AND CAUTION
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Child Safety : Keep children away from the dishwasher when the intensive wash cycle is running, as
prolonged exposure to the steam vent may cause injury.
Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact
with skin and eyes and keep children away from the dishwasher when the door is open. Keep children away
from detergents and rinse-aids. Controls may be locked using “Child Lock” mode to prevent from all the
setting from being changed by a child. Do not allow children to operate the dishwasher.
Young children should be supervised to ensure that they do not play with the appliance.
• Please read this manual carefully before using
the dishwasher for the first time.
• This manual contains very important notes
regarding the installation, use and maintenance
of your dishwasher.
• The manufacturer can not be responsible for
problems caused by ignoring these safety and
caution instructions.
• This dishwasher is designed for normal
domestic household use.
• Do not use the dishwasher for industrial and
commercial use, or other purpose.
• The appliance is not intended for use by young
children or infirm persons without supervision.
placed in the dishwasher.
(Please avoid utensils; that are nonheatresistant, metal decorated, etc.)
• Do not use any kinds of solvent in your
dishwasher. They may cause an explosion or
fire.
• Do not spray water on the appliance.
It may cause the failure of electric parts or
electric shock.
• Do not push down or sit on the inner door
when the door opened. It may cause the
deformation or failure of your dishwasher.
• Do not use hand washing or conventional
dishwashing liquid as it will cause a
malfunction and possible flooding. Only
detergent formulated for Dishwashers must be
used.
• This appliance is fitted with a safety function
that automatically stops the operation of the
dishwasher when it is exposed to heavy
disturbance on its mains.
• Do not insert anything such as coin into the
vapor vent. It may cause noise, and the failure
of mechanical parts.
• Do not expose skin to vapor vent. During
operation, as hot steam may scald.
• Dishwasher detergents are strongly alkaline.
They can be extremely dangerous if
swallowed. Avoid contact with skin and eyes
and keep children away from the dishwasher
when the door is open.
Check that the detergent receptacle is empty
after completion of the wash cycle.
• Some pre-treatment sprays or liquids can
damage your dishwasher’s control panel and
plastic components, so do not use these
products on or around your dishwasher.
During installation
• Electrical connection must be in accordance
with the rating label.
• Electrical safety is only guaranteed when the
earth system of your house is in accordance
with the related local regulations.(Do not use
an extension cable or cord.)
• If the hot water exceeds 65ºC, adjust the water
heater setting. If the hot water temperature can
not be maintained below 65ºC, the dishwasher
must be connected to cold water.
• If power supply cord is damaged, it must only
be replaced by the manufacturer or its service
agent or a similar qualified person in order to
avoid a hazard.
• This appliance must be positioned so that the
plug is accessible.
• The appliance is to be connected to the water
mains using new hose-sets and that old hosesets should not be reused.
During use
• Only suitable household utensils should be
3
SAFETY AND CAUTION
Child Safety
• Controls may be locked using “Child Lock” mode to prevent from all the setting from being changed
by a child. Please refer to the Child Lock instructions for correct operation.
• Keep children away from detergents and rinse-aids.
• Do not allow children to operate the dishwasher.
• Young children should be supervised to ensure that they do not play with the appliance.
CAUTION concerning the Power Cord
• Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
• Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the
point where the cord exits the appliance.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least resistance
for electric current. This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is installed and grounded in accordance with all local codes and
ordinances.
WARNING - Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or service
representative if you are in doubt whether the appliance is properly
grounded. Do not modify the plug provided with the appliance; if it will not
fit the outlet have a proper outlet installed by a qualified electrician.
4
INSTALLATION INSTRUCTION
Step 2 :
PREPARE ELECTRICAL WIRING
WARNING
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person. Any plumbing
work required to install this appliance should
be carried out by a qualified plumber or
competent person.
CAUTION
For personal safety, remove house fuse or
open circuit breaker before installation. Do not
use an extension cord or adapter plug with this
appliance. Electrical and grounding
connections must comply with the national
electrical code/provincial and municipal code
and/or other local codes.
Step 1 :
PREPARE CUPBOARD OPENING
1 This dishwasher is designed to fit to the size
shown as below.
1 This appliance must be supplied with
correct rating voltage and hertz as shown
on instruction manual, and connected to an
individual, properly grounded branch
circuit, protected by minimum 15 amp
circuit breaker or time delay fuse.
Wiring must be 2 wires with ground.
Select a location as close to sink as possible
2 for easy connections to water and drain
lines.
The dishwasher should not be installed
3 more than 3 meters from sink for proper
drainage.
2 The power plug must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher side.(See page 7 Fig.A)
If dishwasher is to be installed in a corner, a
minimum 5cm of space is required between
4 the washer and an adjacent cabinet or a
wall.
3 The power plug must be correctly earthed,
if in doubt, have it checked by a qualified
Electrician. No other appliance should be
connected to the same plug outlet by a
double adapter or similar plug.
Unit:mm
If bare chipboard is adjacent to or above the
dishwasher, it should be sealed with a
waterproofing paint or sealant to prevent
swelling due to steam.
5
INSTALLATION INSTRUCTION
Step 3 :
PREPARE DISHWASHER FOR
INSTALLATION
Step 4 :
INSTALL THE DISHWASHER IN
CUPBOARD
1 Lay the dishwasher on its back.
1 Before sliding the dishwasher into the
cupboard opening, all necessary final
height adjustment and balancing
adjustment should be done using the
spanner.
2 Adjust the legs to the needed height of
cabinet as shown in below figure.
2 Slide the dishwasher into the cabinet
opening carefully. Make sure that the drain
hose inside the cabinet is not kinked or
stretched.
CAUTION
If the height of cupboard is below 850mm,
you should remove the top table by
unscrewing the 2 screws. (Two of rear)
6
INSTALLATION INSTRUCTION
Step 5 :
DRAIN LINE CONNECTION
1 If the end of drain hose does not fit to the
drain line, use a piece of rubber
connector(not supplied) that must be
resistant to heat and detergent and may be
obtained from a plumbing shop.
■ When the drain hose is connected to a
separate stand pipe, it is essential that an
tight connection is made.
Refer to Fig.B
2 There are 2 typical connections as shown in
Figure A, B.
The “S” trap spigot must be drilled out cleanly
and free of obstruction to its maximum internal
diameter, if used for drainage.
To prevent siphoning, one of the following
instruction methods must be followed:
■ When the drain hose is connected to a sink
“s” trap or waste disposal unit, the hose must
be looped up to the underside of the bench
top and secured.
Fig. B : Drainage connection - stand
pipe.
Drain Hose Extension
Extend Drain Hose as shown below.
Fig. A
CAUTION
When you connect or extend Drain Hose,
make sure that drain hose is not kinked.
(Bends should have 40 mm radius.)
7
INSTALLATION INSTRUCTION
Step 6 :
WATER SUPPLY CONNECTION
Step 8 :
HOW TO LEVEL THE PRODUCT
1 Connect the water supply hose to the valve
behind dishwasher and the water tap as shown
in the figure below.
This dishwasher may be fed with either hot or
cold water. If the water can not be maintained
below 65ºC, the dishwasher must be
connected to cold water.
After installing the product, check the ease of
door opening. If it feels tight, is touching the
side of the tub or cabinet, or is difficult to open,
it may be because leveling is required.
Case 1. In case the door is slanted to the
right
2 When connecting, the sealing tape or sealing
compound should be used to avoid water
leaks. Make sure that the line is not kinked or
sharply bent.
Fig. C
Water tap
• If the door is slanted to the right as shown in
figure C, repeat the procedure shown as below
until the door is operated normally.
1) Unscrew(counter-clockwise) the left leg of
back side to raise that corner.
2) Check the door opening function after each
adjustment.
• Once adjusted correctly, there should be no
friction noises or resistance when opening the
door.
Water supply
hose
Valve
Step 7 :
FINAL CHECK AND
ASSEMBLING
Case 2. In case the door is slanted to the left
1 Securely hand tighten supply hose to water
supply.
Plug power supply cord into an earthed the
power plug and switch on.
Fig. D
2 After installing the product, operate the
dishwasher through one cycle (Quick cycle
is recommended) without loading the
dishes. Through this, you can check for
water leak and operating conditions. When
you operate the product the first time,
normal air purging noises may be heard. If
the noises remain during the wash, turn the
unit off and start a wash cycle once again.
8
• If the door is slanted to the left as shown in
figure D, repeat the procedure shown as below
until the door is operated normally.
1) Unscrew(counter-clockwise) the right leg of
back side to raise that corner.
2) Check the door opening function after each
adjustment.
• Once adjusted correctly, there should be no
friction noises or resistance when opening the
door.
PARTS NAME
11. Adjustable Leg
12. Upper Rack
13. Cutlery Rack
14. Detergent & Rinse Aid Dispenser
15. Vapor Vent Cover
16. Upper Spray Arm
17. Lower Spray Arm
18. Filter ASM
19. Lower Rack
1. Vapor vent
2. Control Panel
3. Door Handle
4. Front Cover
5. Lower Cover
6. Process Monitor
7. Power Switch
8. Drain Hose
9. Inlet valve ASM
10. Power Cord
Inlet Hose
※ The appearance and specifications may be varied without notice according to localities.
9
FUNCTION OF CONTROL BUTTON
DELAY START
BUTTON
REMAINING
TIME
• If you want to delay
the start of selected
program, press this
button before pressing
start button.
• Each press of this
button will increase
the start time by one
hour increments.
• The delay start time
can be adjusted from
1 hour to 19 hours.
• Indication of
remaining time
• Self diagnosis and
error message
display
HALF LOAD
• In case of a small wash load,
Energy can be saved by washing
either the upper or lower rack. This
function does not alter the water
consumption.
• With each press, Upper or Lower
rack can be selected.
• In case you don't press this button,
the machine will always operate in
the Vario washing mode, which
operates the upper and lower spray
arms alternatively.
POWER SWITCH
BUTTON
• Used to turn the machine
on for operation.
• After the unit is powered
on, if no button is pressed
within 3 minutes, the
machine will turn off for
safety and energy saving.
• If case of a power surge to
the machine, the power
may be automatically
turned off for safety.
CHILD LOCK
PROGRAM
RINSE/
SANI
START/PAUSE
BUTTON
• Used to lock or unlock the control
buttons to prevent the settings from
being changed or interrupted.
• The Child Lock function can only
be activated after the cycle has
commenced. It cannot be activated
whilst in the power off or stand by
mode, or in a paused mode.
• For locking/unlocking, press Delay
Start and Program button
simultaneously.
• When power is on,
program is
automatically set
to Eco 65℃.
• If you want to
change the
program, press this
button to set the
desired program.
• With each press,
rinse+, rinse+ &
77℃ sani rinse,
77℃ sani rinse is
repeated.
• Rinse 77℃ cannot
be selected on the
Quick, Pre-Wash, or
Gentle 45℃ cycles.
• With each press, Start
and Pause is repeated
during operation.
• If the machine remains
in Pause mode for 5
minutes, the power is
automatically turned off.
10
HOW TO USE AND OPERATE
1. Loading your Dishwasher
Be carefull when stacking large items as
they may obstruct the detergent dispenser
and prevent it from opening.
For the best washing performance, it is important that
the dishwasher is loaded according to instructions.
Before loading items into the dishwasher, you must
scrape off large particles in particular non soluble
items such as bones, toothpicks, pips, etc.
3. Using the Cutlery Basket
Cutlery should be mixed within each section of
the cutlery basket to prevent nesting of similar
items. Place the cutlery in the cover with the
handles down. The cover can be hinged and
clipped away from the basket if you choose not
to use them.
For the knives, place at seperate rack for knives
located at upper rack.
When loading the dishwasher, observe the following
general guidelines:
■ Position crockery such that water will contact all
surfaces.
■ Deep based items should be placed at an angle to
help water run off and dry properly.
■ Items with burnt on scraps should be soaked prior
to loading in the dishwasher.
Take care when loading and unloading
sharp items.
2. Loading the Lower Rack
The lower basket is best loaded with dinner plates,
soup bowls, dishes, pots, pans, lids and even the
grill tray.
Plates should be positioned upright and facing the
center of the rack.
Pots, pans and large dishes must be turned upside
down.
Take care not to obstruct the rotation of the
spray arms.
11
HOW TO USE AND OPERATE
4. Loading the Upper Rack
5. Adjusting the Upper Rack
The upper rack is best loaded with more
delicate items, small plates, long cutlery, cups,
glasses and dishwasher safe plastic items. Plates
should be positioned upwards with the plate
bottom facing the front of the rack.
Cups, glasses and bowls must be positioned
upside down.
Extra cups or cooking utensils can be laid on
the fold down cup racks which may also
provide support for long stem glasses.
Take care not to obstruct the rotation of the
spray arm under the upper rack.
Your upper rack can be raised or lowered to
cater for different size of crockery. Before
adjusting, ensure rack is empty of
all crockery and side the rack out.
Reinsert the rack in the chosen position.
Fitting the rack back into the standard position
reduces the space between the upper and lower
rack.
After adjusting, check that the spray arm
is free to rotate.
�
Front
Non Dishwasher Safe Items
The combination of high water temperatures and
dishwasher detergent may damage particular items,
therefore we do not recommend using the
dishwasher to wash the following:
■ Copper or anodized aluminum
■ Hand painted silver or gold leaf crockery
■ Wood or bone handled utensils
■ Iron or non rust proof utensils
■ Plastic items which are not dishwasher safe.
WARNING
Before adjusting, ensure rack is empty
of all crockery.
Otherwise crockery may be damaged or
you may be injured.
12
HOW TO USE AND OPERATE
6. Adding Detergent
Dispenser
Push latch to open
• Detergent must be put into the detergent
chamber before starting every program except
the Pre-Wash.
• Please follow the manufacturer’s instructions
printed on the manual when detemining the
correct dosage.
• If your dishes are only moderately dirty, you
may be able to use less detergent than
recommended.
• Chambers hold 15g and 25g.
• The amount of detergent depends on the
program. Refer to the guide table.
PROGRAM
AMOUNT OF DETERGENT
Intensive +
25g
Intensive
25g
Eco 65˚
20g
Eco 50˚
15g
Gentle
10g
Quick
10g
Pre-Wash
No detergent
Place proper
detergent into this
compartment
WARNING
The detergent used is a special
Dishwasher detergent and like all
household chemicals should be treated
as a poison and kept out of reach of
children. At completion of each wash
program, the detergent compartment
should be checked and any remaining
detergent removed.
• After the detergent is added, the chamber lid
should be closed.
• The detergent is dispensed automatically
during the operation.
• The chamber lid will remain open after
operation.
Detergent Information
Use only the detergent intended for household
dishwashers. (Ordinary hand-washing
detergent should not be used, because the
foam can interfere with proper operation and
cause flooding.)
13
HOW TO USE AND OPERATE
7. Adding Rinse Aid
Dispenser
To fill the Rinse Aid chamber, rotate the round
cap counter clockwise and remove. Fill the
container to the maximum level with a good
quality Rinse Aid, then replace and lock the
cap.
The Rinse Aid is automatically dispensed
during the final rinse cycle.
Depending on the dosage setting and the
number of washes, the chamber may need only
to be topped up once per month. The rinse aid
level can be checked by looking at the indicator
window when the dishwasher door is fully
open.
● Black indicates sufficient Rinse Aid
O Clear indicates Rinse Aid required
The dosage setting is factory set to suit most
installations. If, after washing, you notice
cloudy spots, streaks or water marks on your
glassware, it may be necessary increase the
setting. To do so, remove the cap and rotate the
indicator arrow to a higher setting then replace
the cap . If the glasses are smeared or there is
foam present on the bottom of the glass or the
bottom of the machine. Select a lower setting.
Rinse Aid Information
Rinse Aid is necessary in order to get spot and
streak free dishes as well as improved drying.
Using the correct amount will improve wash
performance. However, using too much can
produce excess foam leading to possible water
leaks.
14
HOW TO USE AND OPERATE
8. Fold down dividers
10. Energy Test
(AS / NZS 2007)
■ Fold-down dividers at the lower rack can be
lowered to improve stacking of pots and
pans.
■ Appliance loaded in accordance with
standard specifications.
• Example of loaded dishwasher : p.11~12
• Capacity : 12 place settings
• Comparability course : Eco 50˚
• Rinse aid setting : 3
• Reference cleaner : 6g of detergent onto the
inside surface of the door and fill 24g into the
detergent dispenser.
• Height-adjustable Rack-U must be inserted
in the uppermost position.
9. Drying
■ At the end of the program, it is
recommended to slightly open the door.
Water may drip from vent when the door is
fully open.
15
WASH OPTIONS
Before selecting the wash program, press the power button. The Eco 65℃ program
will be selected with remaining time on display window. To change the program,
press the program button to light up the desired program.
Start / Pause Button
Child Lock
After selecting a wash program, press the Start
or Pause button to start the wash cycle.
If at any time you want to interrupt the washing
cycle, press the Start or Pause button. Your
dishwasher will then pause. Press the Start or
Pause button again to re-start dishwasher.
To reduce the possibility of children
interrupting the dishwasher when unattended,
the child lock feature can be selected.
■ Refer to Child Lock instruction for proper
operation.
■ For locking or unlocking, press “Delay Start”
and “Program” buttons simultaneously
during the wash cycle operation.
Progress Indicators
Once you select a program, the progress
indicators light(Wash, Rinse, Dry). When the
Start or Pause button is pressed to start the
program, the current stage light will blink.
Sani-Rinse
When you want to rinse the dishes at a higher
temperature for sanitation, use this function.
The Sani-Rinse will not operate in the Quick,
Pre-Wash, or Gentle 45˚C programs.
If you choose this function, the water
temperature goes up to 77˚C on the final rinse.
Press the Rinse button until the “R77˚” indicator
is lit up.
Delay Start
This function enables the wash cycle to start
anywhere between 1 to 19 hours later.
■ Select the program that you want by using
the program button.
■ Set the delay time you want by pressing the
“Delay Start” button. The delay start time is
increased by 1 hour each time the Delay
button is pressed.
■ Press the start button. The program will be
started automatically after the delayed time
shown in the display has expired.
Half Load
With each press, upper rack only(Upper light
on), lower rack only(Lower light on) can be
selected.
In case of a small wash load, Energy can be
saved by washing either the upper or lower
rack. The water consumption will remain the
same.
Rinse Plus
Normally when you select any program, the
Rinse process is done only two ( 1 normal rinse
+1 heating rinse) or three (2 normal rinse + 1
heating rinse) times according to selected
program. But if you want to rinse more, you can
use this function. As you select R+1 by pressing
Rinse button, an additional rinse is added to the
rinse process.
16
PROGRAMS
Program
WASH
RINSE
Pre Wash
Main
Wash
℃
50℃
℃
70℃
℃
70℃
℃
40℃
℃
60℃
℃
70℃
℃
55℃
℃
65℃
℃
40℃
℃
50℃
℃
40℃
℃
50℃
℃
35℃
℃
40℃
Rinse 1
Rinse 2
Rinse 3
Heating
Rinse
DRY
Intensive+
Intensive
Eco 65˚
℃
30℃
Eco 50˚
Gentle
Quick
Pre-Wash
Intensive + Wash
Eco 65 ˚ Wash
This program is for very heavily soiled
loads including pots, pans and casserole
dishes which may have dry food residue.
This program is for heavily soiled
everyday loads.
Eco 50 ˚ Wash
Intensive Wash
This program is for normally soiled
everyday loads.
This program is for heavily soiled loads
including pots, pans and casserole
dishes.
Gentle Wash
This program is for washing delicate
items like glasses. The Rinse 77˚C
cannot be added in this cycle.
CAUTION
Child Safety : Keep children away from
the dishwasher when the intensive
wash cycle is running, as prolonged
exposure to the steam vent may cause
injury.
Quick Wash
This program is for that quick wash of
lightly soiled recently used dishes and
cutlery. The Rinse 77˚C cannot be added
in this cycle.
17
CHECK AND CARE
To prevent trouble and poor operating, it is important to check and care for the
filters and spray arms at intervals.
Filters
Upper Spray Arm
• Remove the lower rack first.
• Turn the mesh filter counterclockwise to
remove.
• Take out the mesh filter, upper STS filter and
out filter.
• Clean them if necessary.
• Replace them in the reverse order.
• Pull the upper rack forwards.
• Check that the water jet holes are not blocked
by food particles.
• When cleaning is necessary, remove the arm
by unscrewing the nut.
• Clean the spray arm and replace it in the
reverse order.
Lower Spray Arm
• Check that the water jet holes are not blocked
by food particles.
• When cleaning is necessary, remove the arm
by pulling up.
• Clean the spray arm and replace by pushing
down.
18
TROUBLE SHOOTING GUIDE
■ If a problem occurs in your machine, call for service.
■ Before you call for service, check the below instructions to see whether the
problem can be solved by yourself first.
Possible Causes
Problem
The lamps do not come
on when the power switch on.
• Plug is not properly inserted in the socket.
• Fuse blown or circuit breaker tripped.
• The electricity of the house was cut off.
The machine does not start.
• Door is not fully closed.
• The start button is not pressed.
Water is not pumped away.
(The display show “ ” code)
• The drain hose is kinked.
• The filter is clogged. (Clean the filter)
The display shows “
(Automatically Drain Pump operated)
• Excessive water is supplied than normal water level.
• The inlet valve is troubled.
The display shows “
“ code
• Water is not supplied. (Water tap is not opened)
The display shows “
“ code
• Water leakage in Hose connections.
• Water has leaked due to damage.
The display shows “
“ code
• The Heater circuit is troubled.
“ code
The spray arms does not rotate
smoothly
• The spray arms are blocked by food particles.
(Clean the holes of the spray arm)
White deposits are left on the
dish washer after washing.
• The amount of detergent or rinse-aid set incorrectly.
Streaks are left on glassware
• Too little Rinse-aid dispensed.
Dry results are not satisfactory.
• Too little Rinse-aid dispensed.
Washing results are not
satisfactory.
• Incorrect amount of detergent.
• Utensils incorrectly arranged or overloaded.
• Filters are clogged.
• Water jet holes of spray arms blocked.
• Spray arms’ rotation obstructed by utensils.
• Unsuitable program selected.
19
P/No.: MFL30149755
Capacity
12 Place settings
Dimension
600 x 600 x 850 mm (W x D x H)
Weight
52 kg
Power Supply
See rating label
Power Consumption
See rating label
Water Consumption
See energy label
Water Feed Pressure
50 ~ 800 kPa
Download PDF

advertising