LG | LD-1204W | LG LD-1204W Owner’s Manual

DISHWASHER
OWNER'S MANUAL
MODEL
:
LD-1204W / LD-1204M
Please read this manual
carefully
before
operating your
dishwasher. Retain it for future reference.
CONTENTS
SAFETY AND CAUTION
3
INSTALLATION INSTRUCTION
5
PARTS NAME
9
FUNCTION OF CONTROL BUTTON
10
HOW TO USE AND OPERATE
11
WASH OPTIONS
16
PROGRAMS
17
CHECK AND CARE
18
TROUBLE SHOOTING GUIDE
19
SPECIFICATIONS
SAFETY AND CAUTION
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Child
Safety : Keep children away from the dishwasher when the intensive wash cycle is running, as
prolonged exposure to the steam vent may cause injury.
Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact
with skin and eyes and keep children away from the dishwasher when the door is open. Keep children away
from detergents and rinse-aids. Controls may be locked using "Child Lock" mode to prevent from all the
setting from being changed by a child. Do not allow children to operate the dishwasher.
Young children should be supervised to ensure that they do not play with the appliance.
?
Please read this manual
using
?
?
carefully
before
During
the dishwasher for the first time.
Only suitable household utensils should
placed in the dishwasher.
(Please avoid utensils; that are nonheatresistant, metal decorated, etc.)
?
Do not
This manual contains very important notes
regarding the installation, use and
maintenance of your dishwasher.
The manufacturer can not be responsible for
problems
caused
by ignoring
these
safety
This dishwasher is
household
?
?
Do not
use
designed
for normal
?
the dishwasher for industrial and
commercial use, or other purpose.
The appliance is not intended for use
or
They
?
by
infirm persons without
installation
?
rating label.
safety is only guaranteed when
Electrical
the earth system of your house is in
accordance with the related local
?
?
not use an extension cable
Do not
push
down
If the hot water exceeds 65ºC, adjust the
water heater setting. If the hot water
cord is
supply
replaced by
service agent
or a
order to avoid
?
?
on
the inner door
Do not
the
detergent
for hand
washing.
detergent
for normal operation.
This appliance is fitted with a safety
function that automatically stops the
operation of the dishwasher when it is
exposed to heavy disturbance on its mains.
Do not insert anything such as coin into the
use
for dishwasher should be used
Do not expose skin to vapor vent. During
operation, as hot steam may scald.
?
Dishwasher
They
can
be
detergents are strongly alkaline.
extremely dangerous if
swallowed. Avoid contact with skin and
If power
only
sit
?
cold water.
be
or
vapor vent. It may cause the failure of
mechanical parts and noise.
temperature can not be maintained below
65ºC, the dishwasher must be connected to
?
or
opened. It may cause the
deformation or failure of your dishwasher.
?
regulations.(Do
or cord.)
or
when the door
Electrical connection must be in accordance
with the
?
explosion
Do not spray water on the appliance.
It may cause the failure of electric parts
The
?
cause an
electric shock.
supervision.
During
may
fire.
use.
young children
be
any kinds of solvent in your
use
dishwasher.
and caution instructions.
?
use
?
a
damaged,
it must
the manufacturer
similar
or
eyes and keep children away from the
dishwasher when the door is open.
its
qualified person
in
Check that the
hazard.
This
appliance must be positioned so that
the plug is accessible.
The appliance is to be connected to the
water mains using new hose-sets and that
?
old hose-sets should not be reused.
3
detergent receptacle is empty
after completion of the wash cycle.
Some pre-treatment sprays or liquids can
damage your dishwasher's control panel and
plastic components, so do not use these
products on or around your dishwasher.
SAFETY AND CAUTION
Child
Safety
?
Controls may be locked
by a child.
?
Keep children away from detergents and rinse-aids.
Do not allow children to operate the dishwasher.
?
?
Young
children should be
CAUTION
?
using
concerning
"Child Lock" mode to prevent from all the
supervised
to ensure that
they
do not
play
setting
with the
from
being changed
appliance.
the Power Cord
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Most
which powers
?
Do not overload wall outlets. Overloaded wall
damaged wall outlets, extension
are dangerous. Any of these
cords, frayed power cords,
damaged
conditions could result in electric shock or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
or
?
or
outlets, loose
or
cracked wire insulation
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the
point
where the cord exits the
appliance.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least resistance
for electric current. This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is installed and grounded in accordance with all local codes and
ordinances.
This
WARNING
-
Improper connection of the equipment-grounding conductor can result in
risk of electric shock. Check with a qualified electrician or service
representative if you are in doubt whether the appliance is properly
grounded. Do not
fit the outlet have
modify the plug provided with the appliance; if it will
a proper outlet installed by a qualified electrician.
4
a
not
INSTALLATION INSTRUCTION
Step2:
WARNING
PREPARE ELECTRICAL WIRING
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person. Any plumbing
work required to install this appliance should
be carried out by a qualified plumber or
competent person.
CAUTION
For
personal safety,
appliance.
Step1:
This dishwasher is
shown
Select
2
as
a
electrical
designed to
Electrical and
grounding
comply with the national
code/provincial and municipal code
fit to the size
below.
location
1
as
close to sink
as
possible
This
appliance must be supplied with
correct rating voltage and hertz as shown
on
for easy connections to water and drain
lines.
more
or
and/or other local codes.
instruction manual, and connected to
an
branch
individual, properly grounded
circuit, protected by minimum 15 amp
The dishwasher should not be installed
3
house fuse
connections must
PREPARE CUPBOARD OPENING
1
remove
open circuit breaker before installation. Do not
use an extension cord or adapter plug with this
circuit breaker
than 3 meters from sink for proper
Wiring
or
must be 2
time
delay
wires with
fuse.
ground.
drainage.
If dishwasher is to be installed in
4
a
corner,
2
a
minimum 5cm of space is required between
the washer and an adjacent cabinet or a
The power plug must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher
wall.
3
side.(See
page 7
The power plug must be correctly earthed,
if in doubt, have it checked by a qualified
Electrician. No other
connected to the
double
Unit:mm
If bare
chipboard
is
adjacent
to or above the
dishwasher, it should be sealed with a
waterproofing paint or sealant to prevent
swelling
due to steam.
5
Fig.A)
appliance should be
plug outlet by a
similar plug.
same
adapter or
INSTALLATION INSTRUCTION
Step3:
Step4:
PREPARE DISHWASHER FOR
INSTALL THE DISHWASHER IN
INSTALLATION
CUPBOARD
1
Lay
2
Adjust
the
cabinet
as
the dishwasher
legs
on
1
its back.
to the needed
shown in below
height
figure.
of
Before
sliding the dishwasher into the
cupboard opening, all necessary final
height adjustment and balancing
adjustment should be done using the
spanner.
2
Slide the dishwasher into the cabinet
opening carefully.
Make
sure
that the drain
hose inside the cabinet is not kinked
or
stretched.
CAUTION
If the
6
height
of
is below 850mm,
the top table by
cupboard
you should
remove
unscrewing
the 2
screws.
(Two of rear)
INSTALLATION INSTRUCTION
Step5:
DRAIN LINE CONNECTION
1
If the end of drain hose does not fit to the
drain line,
2
There
are
Figure A,
2
typical
■ When the drain hose is connected
of rubber
piece
connector(not supplied) that must be
resistant to heat and detergent and may
obtained from a plumbing shop.
use a
connections
as
to a
separate stand pipe, it is essential that
tight connection is made.
be
Refer to
an
Fig.B
shown in
B.
The "S" trap spigot must be drilled out cleanly
and free of obstruction to its maximum internal
diameter, if used for drainage.
To prevent siphoning, one of the following
instruction methods must be followed:
■ When the drain hose is connected
to a sink
"s" trap or waste disposal unit, the hose must
be looped up to the underside of the bench
Fig.
top and secured.
B
:
Drainage
pipe.
connection
-
stand
Drain Hose Extension
Extend Drain Hose
Fig.
as
shown below.
A
CAUTION
When you connect or extend Drain Hose,
make sure that drain hose is not kinked.
(Bends should have
7
40
mm
radius.)
INSTALLATION INSTRUCTION
Step6:
Step8:
WATER SUPPLY CONNECTION
HOW TO LEVEL THE PRODUCT
1
After
Connect the water
supply hose
to the
behind dishwasher and the water tap
in figure.
installing the product, if you feel some
sticky or hear a frictional sound between the side
portion of door and tub when you open or close
the door, you have to adjust the level of product.
valve
as
shown
This dishwasher may be fed with either hot or
cold water. If the water can not be maintained
Case 1. In
below 65ºC, the dishwasher must be
the door is slanted to the
right
connected to cold water.
2
case
connecting, the sealing tape or sealing
compound should be used to avoid water
When
leaks. Make
sharply
sure
that the line is not kinked
or
bent.
Water
Fig.
tap
?
C
If the door is slanted to the
right
as
shown in
figure C, repeat the procedure shown
until the door is
supply
back side and
the left
?
leg
of
the level.
high
opening of door if there still
remains sticky or friction sound.
When the product is correctly leveled, there
2) Check
Valve
below
operated normally.
1) Unscrew(counter-clockwise)
Water
hose
as
the
not remain
Case 2. In
slant, stickiness
case
do
friction sound.
or a
the door is slanted to the left
Step7:
FINAL CHECK AND
ASSEMBLING
1
2
Securely hand tighten supply hose to water
supply.
Plug power supply cord into an earthed the
power plug and switch on.
Fig.
?
After
installing the product, operate the
dishwasher through one cycle (Quick cycle
is recommended) without loading the
dishes. Through this, you can check for
water leak and operating conditions. When
you operate the product the first, the noise
D
If the door is slanted to the left
as
shown in
figure D, repeat the procedure shown
until the door is operated normally.
of
high
opening of door if there still
remains sticky or friction sound.
When the product is correctly leveled, there
do
back side and
2) Check
may be occurred. In that case, turn off
power switch and restart the dishwasher.
?
the level.
the
not remain
8
below
right leg
1) Unscrew(counter-clockwise)
the
as
slant, stickiness
or a
friction sound.
PARTS NAME
11.
Adjust Leg
2. Control Panel
1.
12.
Upper
3. Door Handle
13.
Cutlery
4. Front Cover
14.
Detergent
5. Lower Cover
15.
Vapor
6. Process Monitor
16.
Upper Spray
7. Power Switch
17. Lower
8. Drain Hose
18. Filter ASM
9. Inlet valve ASM
19. Lower Rack
Vapor
vent
Rack
Rack
& Rinse Aid
Vent Cover
Spray
Arm
Arm
10. Power Cord
Inlet Hose
※ The appearance and
specifications
may be varied without notice
9
according
to
localities.
Dispenser
FUNCTION OF CONTROL BUTTON
DELAY START
REMAINING TIME
BUTTON
?
If you want to
delay
?
the start of selected
program, press this
button before pressing
?
?
remaining
Self diagnosis
error
and
message
?
display
of small load,
In
case
or
lower rack only to
use
BUTTON
upper
time
works vario
The
operate upper and lower spray
by 1 hour.
delay start time
can be adjusted from
In
arm
operating, press this
on.
?
After operating, this
button
case
washing,
For
button first for power
energy.
With each press, can select
upper or lower rack only.
time will increase
delay
?
?
save
you don't select this
button, the machine always
Pressing
the
?
time
start button.
?
Indication of
POWER SWITCH
HALF LOAD
automatically
safety
and energy saving.
If case of irregular surge
switches off for
which
?
disturbances to the
alternately.
machine, the power may
1 hour to 19 hours.
be
automatically turned
safety.
off for
CHILD LOCK
?
Used to lock
or
PROGRAM
unlock
?
the control buttons to
automatically
prevent all the setting
from
being changed by
child.
?
For
locking/unlocking,
press Delay Start and
Program button
simultaneously.
When power is on,
program is
?
set to
normal.
a
?
If you want to change
the program, press the
RINSE/
START/PAUSE
SANI
BUTTON
With each press,
rinse+, rinse+ &
77℃ sani rinse,
77℃ sani rinse is
repeated.
?
With each press, Start
and Pause is repeated
during operation.
?
If the machine remains
in Pause mode for 10
minutes, the power is
button and set the
automatically
program you want to.
off.
10
turned
HOW TO USE AND OPERATE
1.
Be careful
large items not to prevent the
detergent dispenser lid from opening
Loading your Dishwasher
For the best
washing performance, it is important that
according to instructions.
Before loading items into the dishwasher, you must
scrape off large particles in particular non soluble
items such as bones, toothpicks, pips, etc.
3.
the dishwasher is loaded
When
loading the dishwasher,
general guidelines:
observe the
■ Position crockery such that
water will contact all
following
help
run
off and
■ Items with burnt
to
2.
loading
at an
angle
Loading
to
Take
prior
soup bowls, dishes, pots, pans, lids and
plates,
even
the
grill tray.
Plates should be
positioned upright
and
facing
the
center of the rack.
Pots, pans and large dishes
must be turned
upside
down.
Take
care
spray
care
sharp
the Lower Rack
The lower basket is best loaded with dinner
knives, place
at
seperate rack for knives
located at upper rack.
dry properly.
scraps should be soaked
in the dishwasher.
on
Cutlery Basket
to use them.
For the
■ Deep based items should be placed
the
Cutlery should be mixed within each section of
the cutlery basket to prevent nesting of similar
items. Place the cutlery in the cover with the
handles down. The cover can be hinged and
clipped away from the basket if you choose not
surfaces.
water
Using
not to obstruct the rotation of the
arms.
11
when
items.
loading
and
unloading
HOW TO USE AND OPERATE
4.
Loading
the Upper Rack
5.
The upper rack is best loaded with more
delicate items, small plates, long cutlery, cups,
glasses and dishwasher safe plastic items. Plates
Adjusting
the Upper Rack
Your upper rack can be raised or lowered to
cater for different size of crockery. Before
adjusting, ensure rack is empty of
all crockery and side the rack out.
Reinsert the rack in the chosen position.
Fitting the rack back into the standard position
should be
positioned upwards with the plate
facing the front of the rack.
Cups, glasses and bowls must be positioned
upside down.
Extra cups or cooking utensils can be laid on
bottom
reduces the space between the upper and lower
rack.
the fold down cup racks which may also
provide support for long stem glasses.
Take
spray
not to obstruct the rotation of the
care
After adjusting, check that the spray
is free to rotate.
under the upper rack.
arm
arm
?
Front
Non Dishwasher Safe Items
The combination of high water temperatures and
dishwasher detergent may damage particular items,
therefore
we
do not recommend
dishwasher to wash the
using
following:
the
Copper or anodized aluminum
Hand painted silver or gold leaf crockery
Wood
Iron
or
bone handled utensils
or non
rust
WARNING
proof utensils
Plastic items which
are
not
Before adjusting, ensure rack is empty
of all crockery.
Otherwise crockery may be damaged or
you may be injured.
dishwasher safe.
12
HOW TO USE AND OPERATE
6.
?
Adding Detergent
Dispenser
must be
Detergent
chamber before
Push latch to open
put into the detergent
starting
every program except
the Pre-Wash.
?
?
Place proper
detergent into this
Please follow the manufacturer's instructions
the manual when
printed
on
correct
dosage.
If your dishes
are
may be able to
recommended.
only moderately dirty,
less detergent than
Chambers hold
?
The amount of detergent
15g
and
program. Refer to the
Intensive
the
compartment
you
use
?
PROGRAM
detemining
25g.
depends on
guide table.
the
WARNING
The
AMOUNT OF DETERGENT
+
25g
20g
˚
15g
Gentle
10g
Quick
10g
Pre-Wash
?
After the
No
detergent
is
detergent
supplied,
the chamber lid
should be closed.
?
The
detergent is dispensed automatically
during the operation.
?
The chamber lid remains open after
operation.
Detergent Information
Use
only
the
dishwashers.
detergent intended for household
(Ordinary hand-washing
detergent
should not be used, because the
foam
interfere with proper
can
poison
children. At
˚
Eco 50
special
and like all
kept out of reach of
completion of each wash
program, the detergent compartment
should be checked and any remaining
detergent removed.
as a
Eco 65
a
household chemicals should be treated
25g
Intensive
detergent used is
detergent
Dishwasher
operation.)
13
and
HOW TO USE AND OPERATE
Adding Rinse Aid
Dispenser
7.
To fill the Rinse Aid
cap counter
chamber,
clockwise and
rotate the round
remove.
Fill the
container to the maximum level with
quality
Rinse Aid, then
cap.
The Rinse Aid is
during
replace
a
good
and lock the
automatically dispensed
cycle.
the final rinse
Depending
on
the
dosage setting
and the
number of washes, the chamber may need only
to be topped up once per month. The rinse aid
level
can
be checked
at the indicator
by looking
window when the dishwasher door is
fully
open.
Black indicates sufficient Rinse Aid
O Clear indicates Rinse Aid
The
dosage setting
is
installations. If, after
required
factory set to
washing, you
suit most
notice
cloudy spots, streaks or water marks on your
glassware, it may be necessary increase the
setting.
To do so,
indicator
the cap and rotate the
higher setting then replace
remove
arrow to a
the cap If the glasses are smeared or there is
foam present on the bottom of the glass or the
.
bottom of the machine. Select
a
lower
Rinse Aid Information
setting.
Rinse Aid is necessary in order to get spot and
streak free dishes as well as improved drying.
Using the correct amount will improve wash
performance. However, using too much can
produce excess foam leading to possible water
leaks.
14
HOW TO USE AND OPERATE
8. Fold down dividers.
■ Fold-down dividers
lowered to
at the
lower rack
improve stacking
10.
can
be
of pots and
■ Appliance loaded in accordance with
pans.
standard
?
?
?
?
?
?
9.
Drying
■ At the end of the program, it is
recommended to
assist in
Energy Test
(AS / NZS 2007)
fully
open the door to
drying.
15
specifications.
Example of loaded dishwasher : p.11~12
Capacity : 12 place settings
Comparability course : Eco 50˚
Rinse aid setting : 3
Reference cleaner : 6g of detergent onto the
inside surface of the door and fill 24g into the
detergent dispenser.
Height-adjustable Rack-U must be inserted
in the uppermost position.
WASH OPTIONS
Before
selecting
the wash program, press the power button. Then Normal program
remaining time on display window. To change the program,
will be selected with
press the program button
required.
Child Lock
Start / Pause Button
After
or
selecting a wash program, press the Start
Pause button to start the wash cycle.
To reduce the
interrupting
If at any time you want to interrupt the washing
cycle, press the Start or Pause button. Your
dishwasher will then pause. Press the Start
Pause button again to re-start dishwasher.
the child lock feature
For
or
and
Progress Indicators
light
of children
can
be selected.
locking or unlocking, press "Delay Start"
"Program" buttons simultaneously.
Sani-Rinse
Once you select a program, the progress
indicators light(Wash, Rinse, Dry). When press
the Start or Pause button to start the program,
the current stage
possibility
the dishwasher when unattended,
When you want to rinse dishes with higher
temperature for sanitation, use this function.
If you choose this function, the water
temperature goes up to 77˚C when rinsing.
will blink.
Press Rinse button until "R 77
anywhere
cycle
delay
Half Load
by using
time you want
With each press, upper rack
on), lower rack only(Lower
the
In
automatically after the delayed
shown in the display has expired.
Rinse Plus
when you select any program, the
Rinse process is done only two ( 1 normal rinse
Normally
heating rinse) or three (2 normal rinse +
heating rinse) times according to selected
1
program. But if you want to rinse more, you
+1
use this function. As you select R
with
done
can
Rinse button, the normal rinse will be
one
time
case
of small load
lower rack
be started
+1
only(Upper light
light on) can be
selected.
is
Press the start button. Then the program will
pressing
lighted on.
Quick
program.
to start
by pressing
"Delay Start" button. The delay start time
increased by 1 hour for each pressing.
time
is
between 1 to 19 hours later.
Select the program that you want
the program button.
Set the
"
The Sani-Rinse will not operate in
Delay Start
This function enables the wash
˚
more.
16
only
washing,
use
to save energy.
upper
or
PROGRAMS
WASH
Program
Intensive
Pre Wash
Main
Wash
RINSE
Rinse 1
Rinse 2
Rinse 3
Heating
DRY
Rinse
50
70
70
40
60
70
55
65
40
50
40
45
35
40
+
Intensive
Eco
65˚
˚
Eco 50
Gentle
Quick
Pre-Wash
Intensive + Wash
Eco 65˚ Wash
This program is for very heavily soiled
loads including pots, pans and casserole
This program is for
everyday loads.
dishes which may have
dry
including pots,
heavily
soiled
food residue.
Eco 50˚ Wash
Intensive Wash
This program is for
heavily
This program is for
everyday loads.
soiled loads
normally
soiled
pans and casserole
Gentle Wash
dishes.
This program is for
items like glasses.
CAUTION
Child
Safety : Keep
wash
cycle is running,
children away from
the dishwasher when the intensive
as
delicate
Quick Wash
prolonged
exposure to the steam vent may
washing
This program is for that quick wash of
lightly soiled recently used dishes and
cause
injury.
cutlery.
17
CHECK AND CARE
To prevent trouble and poor
filters and spray
arms
operating,
it is
important
Filters
?
?
Turn the mesh filter counterclockwise off.
?
?
Take out the mesh filter, upper STS filter and
out filter.
Pull the upper rack forwards.
Check that the water jet holes
by
?
Clean them if necessary.
Replace them in the reverse order.
?
food
Lower
Check that the water jet holes
by
?
Spray Arm
food
are
not blocked
particles.
When necessary to clean,
remove
the
arm
by
pulling up.
?
Clean the spray
down.
arm
and
replace by pushing
18
are
not blocked
particles.
When necessary to clean,
unscrewing the nut.
Clean the spray
order.
reverse
?
for the
Upper Spray Arm
Remove the lower rack first.
?
care
at intervals.
?
?
to check and
arm
and
remove
replace
the
arm
it in the
by
TROUBLE SHOOTING GUIDE
If
a
problem
in your
occurs
machine, call for service.
Before you call for service, check the below instructions to
problem can be solved by yourself first.
Problem
The
on
see
whether the
Possible Causes
do not
lamps
come
when the power switch
on.
The machine does not start.
Water is not
pumped
(The display show
"
The
"
display
shows
(Automatically
Drain
away.
"
"
code)
code
Pump operated)
is not
inserted in the socket.
?
Plug
?
properly
Fuse blown
?
The
?
Door is not
?
The start button is not
?
The drain hose is kinked.
?
The filter is
?
Excessive water is
?
The inlet valve is troubled.
or
circuit breaker
of the house
electricity
fully
tripped.
was
cut
off.
closed.
pressed.
clogged. (Clean
the
filter)
supplied than
normal water level.
The
display
shows
"
"
code
?
Water is not
The
display
shows
"
"
code
?
Water
?
Water is leaked
?
The circuit of Heater is troubled.
?
The
mounting of spray arms is blocked by food
particles. (Clean the holes of the spray arm)
?
The amount of
?
Too little Rinse-aid
dispensed.
?
Too little Rinse-aid
dispensed.
?
Incorrect amount of
The
display
The spray
shows
"
"
code
does not rotate
arms
smoothly
White
deposits
are
dish washer after
Streaks
are
Dry results
on
the
leakage
is not
opened)
in Hose connections.
by damages.
detergent
or
rinse-aid set
incorrectly.
washing.
left
on
are
not
Washing results
satisfactory.
left
supplied. (Water tap
glassware
satisfactory.
are
not
?
?
?
?
?
detergent.
incorrectly arranged or overloaded.
Filters are clogged.
Water jet holes of spray arms blocked.
Spray arms' rotation obstructed by utensils.
Utensils
Unsuitable program selected.
19
Capacity
12 Place
Dimension
600x600x850mm(WxDxH)
Weight
52
Power
Supply
See
rating
label
Power
Consumption
See
rating
label
Water
Consumption
See energy label
Water Feed Pressure
P/No.: 3828DD3009B
settings
kg
50~800kPa
Download PDF

advertising