LG | V-CA241NTU | LG V-CA241NTU Owner’s Manual

V-CA241NT**
V-CA241HT**
V-CA261NT**
V-CA261HT**
P/No.: 3828Fi3833P
Table of contents
Safety
Information.....................................................................................................3
How to Use.................................................................................................................4
Assembling
Using
the
cleaner ...............................................................................................................4
cleaning
head and
Accessory
Nozzles..................................................................6
Emptying
the Dust Chamber .................................................................................................8
Operating
the cleaner............................................................................................................9
Cleaning
the Filter ................................................................................................................10
Cleaning
the Exhaust Filter....................................................................................................11
User's Guide For Turbine
Nozzle(Option)
....................................
.........................................12
Troubleshooting.....................................................................................................................13
2
P/No.: 3828Fi3833P
Safety
Information
Please read the
following information, which contains important instructions for
the use and maintenance of the appliance.
This appliance complies with the following EC Directives: -73/23/EEC,
93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.
The appliance is not intended for use by young children or infirm persons without supervision.
Young Children should be supervised to ensure that they do not play with appliance.
If the appliance is supplied from a cord extension set or an electrical portable outlet device,
the cord extension set on electrical portable outlet device must be positioned so that it is not subject
or ingress of moisture.
Do not use the appliance if the power cord is damaged or faulty.
If the power cord is damaged, it must be replaced by an approved LG Electronics Service Centre.
Always switch the vacuum cleaner off before:
Emptying the dust chamber.
Cleaning or changing the filters.
Do not vacuum flammable or explosive substances(liquids or gases).
Do not vacuum hot ash, embers etc. nor sharp objects.
Do not vacuum water or other liquids.
Do not unplug by pulling on cord.
Use only LG's recommended filters.
When you vacuum with an attachment appliance that has a rotating brush roller:
Do not reach into the running brush roller.
The application is not intended for use by young children or infirm persons without supervision.
to
splashing
protector: This vacuum cleaner has a special thermostat that protects the cleaner in
case of motor overheating. If the cleaner suddenly shuts off, turn off the switch and unplug the
cleaner. Check the cleaner for a possible source of overheating such as a full dust chamber, a blocked
hose or clogged filter. If blockage or obstruction is located, remove and wait at least 30 minutes
Thermal
before
attempting
period, plug the cleaner back in and
please contact your approved LG service centre.
to use the cleaner. After the 30 minutes
turn on the switch. If the cleaner still does not run,
3
P/No.: 3828Fi3833P
How to Use
Fit the
large cleaning
Assembling Cleaner
2
head into the end of the tube.
NT**
Spring
NE**
latch
Telescopic
HT**
tube
HE**
1
The 2
Push
position
head
Telescopic tube (depending
telescopic tube into
?
nozzle outlet.
?
?
?
4
P/No.: 3828Fi3833P
Press the
spring latch
spring latch
model)
to release.
Pull out the tube to the desired
Release
on
length.
to lock the tube in
position.
Push telescopic tube into hose handle firmly.
Head
Flexible Hose
NT**
NE**
HT**
HE**
Attachment Point
Button
3
Connecting
?
the flexible hose
Push the end of the head
into the attachment
?
To
remove
pull
on
the flexible hose
the
vacuum
the flexible hose from the
cleaner, press
then
point
on
on
the button situated
the head out of the
vacuum
CAUTION
cleaner.
vacuum
on
the
?
Suction power may be weakened when
are sucked. In this case, clean the filter.
?
Make the dust box
head,
cleaner.
degree
empty if dusts
are
insignificant
dusts
filled to the maximum
and then clean the filter when it becomes 5 times.
5
P/No.: 3828Fi3833P
P/No.: 3828Fi3833P
1
4
3
2
4-1
4-2
5
(Option)
(Refer to page 12)
4
Pedal
The 2
position head
(Depending on model)
?
?
?
The 2
position cleaning head
equipped with a pedal which allows
you to alter its position according to
the type of floor to be cleaned.
Hard floor position
(tiles, parquets floor)
Press the pedal to lower brush.
Carpet or rug position
Press the pedal to lift the brush up.
7
P/No.: 3828Fi3833P
P/No.: 3828Fi3833P
P/No.: 3828Fi3833P
P/No.: 3828Fi3833P
P/No.: 3828Fi3833P
User's Guide for Turbine Nozzle
Turbine brush nozzle
Air
adjustment
Slide the air control lever to the right for
long pile carpet and to the left for short
pile carpet.
Cleaning
turbine brush nozzle
Press the button on the rear side of the
nozzle to separate the air cover.
Use the
dusting brush & crevice tool
vacuum
clean the brush and fan.
to
12
P/No.: 3828Fi3833P
(Option)
Troubleshooting
What to Do When Suction Performance Decreases
?
Turn off the
?
Check the
?
Check that the dust chamber is not full.
?
Check that the motor filter
?
Check that the exhaust filter is not
?
If you
are
vacuum
cleaner and
telecsopic tube,
still
it.
unplug
flexible hose and
light
is not
cleaning tool for blockages
Empty if necessary.
or
obstructions.
filter, if necessary.
blocked. Clean the exhaust filter, if necessary.
on.
Clean the motor
experiencing problems, please
To locate your nearest service centre you
contact your local service centre.
can
visit
our
web site
www.lge.com.au
13
P/No.: 3828Fi3833P
Notes
14
P/No.: 3828Fi3833P
Notes
15
P/No.: 3828Fi3833P
P/No.: 3828Fi3833P
P/No.: 3828Fi3833P
Download PDF