LG | V-CA663STU | LG V-CA663STU Owner’s Manual

Model
VTCA663STU.AFLRLAP
Language
English
Page
6
Color(cover/body)
Material
Weight 100g
Size(W*H)
150?220(mm)
Date
2005.07.21
Designer
Hany
3828FI1003M
Description
owner's manual
Part No.
Chage
Record
Change
No.
1
2
3
4
5
6
7
8
9
1/1
change
content
for the demand of
buyer
ECO No.
Date
Designer
AVTI506050 05.10.10 Qi
Teng
Confirm
C.Y.T
V-CA663STU
2
4
4
1
3
5
11
19
12
20
6
7
8
910
31
12
65
32
3
30
9
7
8
10
--2--
11
14
12
15
MAX
MIN
13
18
17
19
20
23
22
21
28
26
24
25
27
32
33
--3--
E
Information for your
safety
Please read all the following information,
which contains important instructions for the
safety, the use and the maintenance of the
appliance.
This appliance complies
with the
Using the cleaning head and Accessory
Nozzles(depending on model)
Fit the large cleaning head onto the end of
?
following EC
Directives: -73/23/EEC, 93/68/EEC-Low
Voltage Directive-89/336EEC -EMC Directive.
The appliance is not intended for use by
young children or infirm persons without
supervision.
Young Children should be supervised to
ensure that they do not play with applisnce.
If the appliance is supplied from a cord
extension set or an electrical portable
outlet device, the cord extension set on
electrical portable outlet device must be
positioned so that it is not subject to
splashing or ingress of moisture.
Do not use the appliance if the supply
cord is damaged or faulty.
If the mains lead is damaged, it must be
replaced by an approved LG Eletronics
Service Agent in order to avoid a hazard.
Always switch the vacuum cleaner off
before:
changing the dust bag.
changing or cleaning the filters.
If no dustbag is inserted, the cover cannot
be closed. Please do not use force!
Do not vacuum flammable or explosive
substances(liquids
Do not
vacuum
sharp objects.
Do not
vacuum
How to
or
?
?
?
?
?
water or other
(31).
Easy & Powerful cleaning through
adjusting the air-control lever (32).
: use
?
nor
Cleaning
How to
use
the handle
To assemble the handle(4)on the body,
push it into the body until being fixed tightly.
Do not grip the handle to move the vacuum
cleaner with the unfastened handle.
Connecting the flexible hose
Push the end of the head(1)on the flexible
hose(2)into te attachment point on the vacuum
cleaner.
To remove the flexible hose from the vacuum
cleaner,press on the button(3)situated on
the head then pull upwards.
for hard floor & short
for
long type carpet.
turbine brush nozzle
(33)
Press the button on the rear side of the
nozzle to separate the air cover.
Use the dusting brush & crevice tool to
vacuum clean the brush and fan.
plug
in and
use
Pull out the supply cord to the desired
and plug into the socket.
Assembling
length
Press button(12)to start the vacuum cleaner.
To stop it press the button(12)again.
?
?
Adjusting
the power level
(depending
on
model)
The flexible hose handle(13)has a manual
air flow regulator(14) which allows you to
briefly reduce the suction level.
Electronic power control (15)
Suction capacity increases steplessly up to
MAX.
Park-System (17)
For short breaks during vacuuming, for example
to move a small piece of furniture or a rug,
use the [Park system] to support the flexible
hose and cleaning head.
-
-
-
Turbine brush nozzle
type carpet.
liquids.
Assembling the tubes
(depending on model)
?Telescopic tube (5)
Push spring latch(6)forward.
Pull out the tube to required length.
Release spring latch to lock.
Hard floor position(tiles, parquet floors...).
Press on the pedal to lower the brush.
Carpet or rug position. Press on the pedal
to lift the brush up.
Crevice Tool (9)
For vacuuming in those normally inaccessible
places i.e. reaching cobwebs, or down the
side of a sofa!
Dusting brush (10)
For vacuuming picture frames, furniture outlines,
books and other uneven objects.
Upholstery Nozzle (30)
For vacuuming upholstery, mattresses, etc.
The thread collectors help to pck up the threads
and fluff.
: use
gases).
hot ash, embers etc.
the tube
The 2 position head (7) is equipped with
a pedal (8) which allows you to alter its
position according to the type of floor to be
cleaned.
?
Slide the hook attached to the large cleaning
tool into the slot on the rear of the appliance.
--4--
E
Storage(18)
your
When you have switched off and unplugged
the appliance, press the button (11) to
automatically rewind the cord.
You
can
move or
store your
vertical
position by sliding
large cleaning head into
underside of the appliance.
Changing
the dust
The
needs
dustbag
appliance
the hook
the
clip
in
the
on
the
changing
It could be that
has
?
?
up the pores of the dust
clogged
Turn off the
Open the
and lifting
appliance
cover
and
unplug
by pressing
Your
is
foam filter, electrostatic filter
washable HEPA filter(26).
?
To
:
replace the cover(25) after changing or
cleaning the filter, insert the cover by
aligning a grove(27) of the cover with a
projection(28) on the cleaner and twist to
the right.
?
The
foam
filter should
regularly by tapping
to be
remove
cleaned
the dirt.
The electrostatic filter should be
?
The washable HEPA filter should be cleaned
changed
regularly. (approximately every 6 bag
changes)
bag.
it.
with cold and
hook(20)
place.
with either
it to
be
?
the
it up until it snaps into
with different
and take filter out.
great deal of very fine dust
a
equipped
change the filter or wash the HEPA
filter(26) turn the cover(25) of the filter left
when the cleaner
completely coloured red.
if the dustbag does not appear
this stage, it should be changed.
is
To
?
is
window(19)
full at
or
bag
is set to maximum power and the cleaner head
is off the floor but the "bag full" indicator
Even
types of filters
a
on
appliance
year.
Do not
-
-
appliance
equipped
paper dust bag (21) or a fabric dust bag
(23)(depending on model).
Take hold of the dust bag by the handle
and pull.Remove the bag and throw it
a
use
a
once a
the brush.
Allow HEPA filter to
for
water at least
running
dry
in
a
shaded
place
day
?
What to do if your
does not work?
away.
?
To refit
a new
bag push the
new bag into
support of a
(22)until it will go
no
cardboard
the
mount
bag
Check that the
Note:
it
replace it(23).
the appliance is
or
fitted with
a
appliance
motor. Each time that you
outlet filter
motor
we
filter(24)
the dirt and then
vacuum
cleaner.
Depending
bag
change
replacing
Check that the tubes, flexible hose and
cleaning tool are not blocked.
?
Check that the dust
bag
is not
full.Replace
if necessary.
?
the air
it in the
the air outlet filters
on
unplug
it.
?
advise you to remove the
and to clean it by tapping to
remove
Changing
and the
appliance
and
Stop
The motor filter is situated inside the
between the dust
the
?
the motor filter
Cleaning
correctly plugged
socket is working.
Do not wash it.
safety
device which checks that the bag is in place
you cannot close the lid if the bag is not
fitted correctly.
as
is
What to do when the suction
performance reduces?
above.
Empty
appliance
in and that the electrical
further.
If your appliance is fitted with a fabric dust bag follow the same instructions
as
appliance
the model you have chosen
--5--
Check that the air outlet filter is not
blocked.
Replace
if necessary.
P/NO.: 3828FI1003M
Download PDF