LG | V-CP663ND | LG V-CP663ND Owner’s Manual

V-CP663SD/ND
V-CP643SD/ND
V-CP653SD/ND
8
2
9
1
10
11
3
4
17
7
5
6
213
4
7
9
5
8
6
--2--
12
10
11
13
15
14
17
16
18
19
20
21
22
24
23
--3--
E
Information for your
?
safety
The 2
position head(5) is equipped with a
pedal(6) which allows you to alter its position
according to the type of floor to be cleaned.
Hard floor position(tiles, parquet floors...).
Press on the pedal to lower the brush.
Carpet or rug position. Press on the pedal
Please read all the
which contains
following information,
important instructions for the
safety, the use and the maintenance of the
appliance.
This appliance complies with the following EC
Directives:
Voltage
-73/23/EEC, 93/68/EEC-Low
to lift the brush up.
Crevice
Tool(7)
vacuuming in those normally inaccessible places i.e. reaching cobwebs, or down
?
Directive-89/336EEC -EMC Directive.
Never allow children to
use
the
For
appliance
the side of
unsupervised.
Do not
the
If the
appliance
supply
damaged or faulty.
If the main lead is damaged, it must be
replaced by an approved LG Electronics
Service Agent in order to avoid a hazard.
Always switch the vaccum cleaner off
use
Dusting brush(8)
For vacuuming picture
?
cord is
before
?
:
How to
cannot be closed. Please do not
and
use
plug
or
Do not
ash, embers
vacuum
hot
To
gases).
etc.
?
Do not
vacuum
water
or
other
Connecting
liquids.
briefly
head(1)
hose(2)
vacuum
cleaner.
remove
on
point
on
the
handle(12) has a manual
regulator(13) which allows you to
reduce the suction level.
(depending
on
model)
Park-System(15)
vacuum
cleaner, press on the button(3) situated
head, then pull upwards.
cleaner.
vacuum
the power level
For short breaks
the flexible hose from the
Assembling
task.
the flexible
to start the
If your appliance is equipped with an
electronic variable power control(14), you
can choose the power appropriated for the
the flexible hose
into the attachment
(11)
The flexible hose
?
Push the end of the
length
stop it press the button (11) again.
air flow
How to Use
use
cord to the desired
supply
Adjusting
nor
sharp objects.
in and
into the socket.
Press button
explosive
substances(liquids
To
plug
Pull out the
force!
or
objects.
threads and fluff.
?
flammable
uneven
Upholstery Nozzle(9)
For vacuuming uphostery, mattresses, etc.
The thread collectors help to pick up the
changing the dust bag.
changing or cleaning the filters.
If no dustbag is inserted, the cover
vacuum
frames furniture
outlines, books and other
?
Do not
sofa!
a
on
the
example
use
(depending on model)
Metal tube(4)
Fit together the two tubes by twisting slightly.
?
during vacuuming, for
small piece of furniture
move a
the
Park
rug,
flexible hose and
to
system
cleaning
support
tool into the slot
on
the
of
rear
large cleaning
appliance.
of the
Storage(16)
-
Using the cleaning head and
Accessory Nozzles (depending
Fit the
large cleaning
When you have switched off and unplugged
the appliance, press on the button (10) to
automatically
on
model)
You
head onto the end of the tube.
rewind the cord.
can move or
vertical
store your
appliance
the hook
position by sliding
large cleaning head into the clip
underside of the appliance.
--4--
a
the
head.
Slide the hook attached to the
?
the tubes
to
on
on
the
in
a
the
E
cleaner is set to maximum power and the
cleaner head is off the floor but the "bag full"
working life of this set is 7 years since
delivery to the consumer.
Upon the expiry of the said period, it might
be unsuitable for the use according to their
indicator
destination.
Changing
The
the dust
dustbag
needs
The
bag
changing
window(17)
is
the date of
when the
completely
coloured
red.
Even if the
at this
dustbag
stage,
It could be that
has
changed.
great deal of very fine dust
up the pores of the dust
clogged
?
Turn off the
?
Open
lifting
the
a
appliance
cover
and
unplug
by pressing
it up until it snaps into
the
hook(18)
place.
appliance is equipped with either
dust bag (19) or a fabric dust bag (21)
(depending on model).
Take hold of the dust
pull.
Remove the
?
To refit
a new
support of
bag
bag by
no
the
a
performance reduces?
?
?
mount
?
Note:
as
the
(20)
further.
replace it(21).
appliance
is fitted with
a safety
bag is in place
the bag is not fitted
device which checks that the
you cannot close the lid if
correctly.
Cleaning
the motor filter
The motor filter is situated inside the
appliance
bag and the motor. Each
time that you change the air outlet filter we
advise you to remove the motor filter(22) and
to clean it by tapping to remove the dirt and
then replacing it in the vacuum cleaner.
between the dust
Changing
?
To
the air outlet
filters(Optional)
change these filters remove the cover of
compartment(23) situated at the rear
the appliance.
the filter
of
?
The foam
filter(24)
regularly by tapping
should be cleaned
it to
remove
the
appliance
Check that the
tool
the dirt.
--5--
and
unplug
it.
tubes, flexible hose and
are
not blocked.
Check that the dust
necessary.
above.
it and
Stop
cleaning
If your appliance is fitted with a fab-ric
dust bag follow the same instructions as
Empty
correctly plugged
working.
paper
the handle and
bag
is
What to do when the suction
and
the cardboard
bag push
bag into
appliance
in and that the electrical socket is
and throw it away.
a new
until it will go
Check that the
bag.
appliance
it.
Your
?
What to do if your
does not work?
does not appear to be full
it should be
bag
is not full.
Replace
if
http://www.lge.com/
P/No.
:
3828FI2845F
Download PDF

advertising