LG | V-KC402CTU | LG V-KC402CTU Owner’s Manual

OWNER'S MANUAL
V-KC402CT**
V-KC402CT*
V-KC402CE*
New
Type Cyclone
vacuum
cleaner
Table of contents
Information for Your
How to Use
Assembling
Using
the
Safety
......................................................................................................
Cleaner
Cleaning
...........................................................................................
head and
Cleaning
the
Emptying
the Dust Tank
Grip
..............................................................................
carpet
master
Handle Controller
Voice Alarm Function
Vacuum Cleaner
Accessory
Nozzles
......................................................
..................................................................................
......................................................................................
......................................................................................
.......................................................................................
Operation
Cleaning
the Dust Tank
Cleaning
the Air Filter
Cleaning
the Exhaust Filter
................................................................................
...............................................................................
What to do when suction
.................................................................................
2
performance
decreases
4
4
6
8
9
10
11
12
13~14
.......................................................................................
What to do if your Vacuum Cleaner does not work
3
..........................................
...........................................
15
16
17
17
Information for Your
Safety
Please read all the
following information, which contains important instructions for the safety,
the use and the maintenance of the appliance.
This appliance complies with the following EC Directives: -73/23/EEC,
93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.
The appliance is not intended for use by young children or infirm persons without supervision.
Young Children should be supervised to ensure that they do not play with appliance.
If the appliance is supplied from a cord extension set or an electrical portable outlet device,
the cord extension set on electrical portable outlet device must be positioned so that it is not subject
to aplashing or ingress of moisture.
Do not use the vacuum as a toy, injury could result.
Do not continue to vacuum if any defect appears, missing or damaged.
In these cases, contact an approved LG Electronics Service Agent.
Repairs, when necessary, must be performed at an approved LG Electronics Service Agent.
Only use parts produced or recommended by LG doing otherwise could invalidate your guarantee.
Do not
use
Do not
use
without the dust tank
air filter.
cleaner If the power cord is damaged or faulty.
If the power cord is damaged, it must be replaced by an approved LG Electronics Service
Do not unplug by pulling on cord.
Do not
pull
the
or
on
vacuum
the
supply cord,
run over
Always turn the vacuum cleaner off
Emptying the dust tank.
Cleaning or changing the filter.
Romoving from the mains outlet.
it, pull it around sharp edges
Agent
to avoid
hazard.
a
near/over hot surfaces.
or
before:
?
?
?
Do not leave
Do not
Do not
plug connected to a mains outlet-unplug when not in use.
use the vacuum with any of the openings blocked with any object that may restrict the airflow.
put any part of the body, clothes or any object (e.g. stick) into the opening or moving parts of the
vacuum
Do not
use
Do not
vacuum
Do not
Do not
Do not
cleaner with the
cleaner.
outdoors.
hot ash, embers etc.
sharp objects.
vacuum flammable or explosive substances(liquids
vacuum water or other liquids.
handle the cleaner or plug with wet hands.
or
or
gases).
Do not immerse the whole cleaner in water.
Do not
repair if it was under water.
When you vacuum with an attachment appliance that has a rotating brush roller:
Do not reach into the running brush roller.
The appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
use vacuum
cleaner without
?
?
Thermal
This
protector:
vacuum
If thecleaner
cleaner has
suddenly
Check the cleaner for
If these conditions
are
After the 30 minutes
a
special
thermostat that
protects the cleaner in
shuts off, turn off the switch and
a
possible
source
of
overheating
found, fix them and wait
period, plug
unplug
such
If the cleaner still does not run, contact
a
full dust tank,
at least 30 minutes before
qualified
of motor
overheating.
the cleaner.
as a
the cleaner back in and turn
case
on
a
blocked hose
attempting
to
use
or
clogged
filter.
the cleaner.
the switch.
electrician.
3
How to Use
Fit the
large cleaning
Assembling Cleaner
head onto the end of the
pipe.
2
Spring
latch
Telescopic pipe
1
?
NZ-50
?
NZ-46
?
(Optional)
1
Large cleaning
head
Push the head onto the
telescopic pipe.
2
(Optional)
Telescopic pipe
?
?
?
?
4
NZ-43
Press the
spring latch to release.
Pull out the pipe to the desired length.
Release spring latch to lock the pipe in position.
Push telescopic pipe into hose handle firmly.
Head
Button
Flexible Hose
3
Attachment Point
3
Connecting
the hole to the cleaner
Push the end of the head
into the attachment
To
remove
pull
on
the flexible hose
the
vacuum
the flexible hose from the
cleaner, press
then
point
on
on
the button situated
the head out of the
vacuum
cleaner.
vacuum
on
the
head,
cleaner.
5
How to Use
Upholstery
Using
Cleaning
nozzle
head and
Dusting
Accessory
Upholstery
Nozzle
2
Crevice tool
3
Dusting
Brush
Upholstery Nozzle is for
vacuuming upholstery,
Dusting Brush is for
vacuuming picture frames,
mattresses, etc.
furniture
The thread collectors
other
help
to
3
vacuuming in those
normally hard-to-reach
places such as reaching
frames, books and
irregular
Crevice Tool
Crevice Tool is for
surfaces.
cobwebs,
pick
up
the threads and fluff.
or
cushions of
?
?BOX?
6
Nozzles
brush
2
1
1
the
Accessory
between the
a
sofa.
nozzles include in the "PE BAG"
with owner's manual.
1
2
3
4
5
6
7
(Optional)
4
?
(Optional)
Cleaning carpet
and floor nozzle
Pedal
Carpet
Carpet
Floor
4
Carpet
?
and floor nozzle
The 2
head
position cleaning
equipped with a pedal which
allows you to alter its position
according to the type of floor to
the
Open
?
Divide the nozzle into two
?
Clean the hole of the nozzle.
cover
by pulling
the hook.
?
parts
be cleaned.
?
?
Carpet
position
Press the pedal to lower
Hard floor position
(tiles, parquets floor)
Both
or
types
rug
are
brush.
available.
7
How to Use
Cleaning
the carpet master
Cleaning
5
Pile
Powerful Turbine Brush
Adjustment
Open
Long Carpet
2
1
Short
Open
Carpet
Top
Bottom
Carpet
5
?
?
Open
Open
master
the window
the
cover
by pulling
at the bottom
by pulling
?
Clean the brush.
?
Clean the brush and hole at the bottom.
?
Slide the Pile
Adjustment
and to the left for short
8
the hook.
to the
carpet.
right
for
the hook.
long carpet
How to Use
Emptying
the Dust Tank
PUSH
Tank handle
Dust
drop
Pull out
Dust Tank
Tank
The dust tank needs
?
Turn off the
?
Grasp
emptying
vacuum
separation
when
Lever
LED is turned to red.
cleaner and
the handle of the tank
the tank
?
Separation
unplug it.
and then push
CAUTION
When suction power suddenly
operates in Auto mode.
lever.
Pull out the tank.
the tank and then
push
the tank into the cleaner.
?
Empty
?
Push the dust tank into the tank mount
as
far
as
?
it will go.
Check the tank if suction power weakens when it is not
in Auto mode.
If dusts
?
weakens, check the cleaner
full, empty the dust tank.
If suction power is not improved still, clean the Air filter.
are
CAUTION
Don't grasp the tank handle when you
the Cleaner.
Tank
Carrier
handle
handle
The cleaner's
tank and
body
body.
are
may be fell down with
moving
separating
You should grasp the carrier handle when you
moving the cleaner.
are
9
How to Use
Grip
Handle Controller
OFF
MIN
AUTO
MAX
OFF
MIN
MAX
AUTO
OFF
:
All LEDs turn
MIN
:
MAX
:
Mode that noise is weakest in minimum power status. Use this mode at
Mode to indicate maximum suction power operation.
AUTO
:
Auto mode
on
when
measures
powering
quantity
power accordingly. If dust is
Min status.
?
Auto Mode
?
Auto
When
off
or
being
in
Standby
of dust via the dust
sensor
night
or
when calmness is needed.
mounted in the cleaner and
automatically adjusts
suction
discovered, the mode becomes Max status, and if dust is removed, the mode becomes
?
on
?
Dust detection
OFF
OFF
MIN
MIN
MAX
MAX
AUTO
AUTO
operating in Auto Mode, the LED flickers if the dust
After that operation mode change to MAX mode.
10
mode.
sensor
detects dust.
How to Use
Voice Alarm Function
Speaker
1
VOICE ALARM
2
Voice alarm to inform
operation
status of the cleaner.
VOICE ALARM
?
To let voice alarm
ON/OFF(default
:
ON)
OFF, press "OFF" button
for three second.
?
Informs
a
operation status of the cleaner with
speaker mounted inside of the cleaner cover.
Power On:
Hello,
Power
on.
OFF
Select desired mode.
MIN
When
When
LED turns
on:
Empty dust bin, and
pre-filter. Please.
clean
MAX
AUTO
cleaning stops: Stop.
MIN: Minimum mode.
MAX: Maximum mode.
AUTO: Auto mode.
?
To let voice alarm
ON, press "OFF" button
for three second.
CAUTION
When the dust tank is full
lamp( )
rapidly by
is on, also,it(cleaner)
itself to protect the motor
makes suction power low
after 1 and half minute. This time full LED is still
:
Empty
the dust bin and clean the
MIN
on.
Even if the dust tank does not appear to be full at this stage,
it should be cleaned. The air filter should be cleaned at once.
Voice alarm
OFF
MAX
AUTO
pre-filter.
11
How to Use
Vacuum Cleaner
Cord reel button
Operation
Suction control switch
2
1
3
OFF
MIN
MAX
AUTO
Plug
Display
1
How to
Plug
in and Use
2
Adjusting
LED
the
3
Park
System
Suction power
?
?
?
Pull out the power cord to the
desired length and plug into
?
the socket.
?
Adjust cleaning status and
operation of the cleaner at
the control part of the grip
mode among "MAX".
"MIN", "AUTO" and "OFF".
vacuuming and
pause while vacuuming.
For deposit after vacuuming,
for example to move a small
piece of furniture or a rug, use
The
the Park
Adjust
control
?
suction level at the
part of the grip handle.
Press the button of desired
is
lighted
on
handle.
when the Dust Tank is
Press the OFF Button of the
filled with
grip
handle to
Empty
stop.
or
Air filter is
closely
clogged.
the Dust Tank and clean
the Air filter.
?
The
when
could be
sucking
?
To store after
lighted
fine.
to
system
support the
flexible hose and
-
Slide the hook
cleaning
cleaning head.
on the large
head into the slot
the side of the
At this time clean the Air filter.
12
?
vacuum
on
cleaner.
How to Use
Cleaning
the Dust Tank
Pull out
?
Check that dusts
are
full
by
the
position
indicated
as
"MAX" in the dust tank.
?
Press the lever of tank handle and
?
Empty
?
Wash tank with water.
?
Dry
it
dust
fully
by pressing
in shade
so
the dust
pull
WARNING!
the dust tank out.
empty button
as
figure.
The
?
that moisture is
entirely
removed.
-
cleaning
Every
6 months
When the indicator
light
comes on
Exhaust filter
-
?
of the
Air filter
-
?
cycle
The exhaust filter should be cleand at least
once a
year
Dust Tank
-
When dusts
are
full
by the position
indirated
as
"MAX" in
the dust tank.
Air
guide assembling
the
?
Adjust
?
Assemble the air
arrow
of the air
guide to
guide by rotating
the rib of the tank.
it clockwise.
13
How to Use
Cleaning
the Dust Tank
Cover deco
Cap
dust
CLICK!
Push in
by pressing
the dust
Empty
?
Remove the COVER DECO
?
Wash the dust tank.
?
Dry it fully
Adjust the
?
14
dust
?
in shade
arrow
so
empty button
by rotating
that moisture is
of COVER DECO to
?
Assemble the COVER DECO
?
When
connecting
the tank to
as
figure.
it counter-clockwise.
entirely
a arrow
removed.
of the CAP DUST.
by rotating it clockwise.
the main body, push it until
you hear
'clattering'.
How to Use
Cleaning
the Air
Filter(Pre- Filter)
Micro Filter
Filter
Sponge
Filter Cover
The dust filter is located at below the filter
in above
If the
firstly
?
?
figure.
LED is
up when the dust tank is not
clean the air filter.
lighted
Release the lever of the main
arrow
?
cover
Open
mark
as
the filter
body
toward the
cover
it
fully
filter, sponge filter,
with water.
parts separately under
water until the water
Do not
runs
cold
running
clear.
only with damp
excess
a
cloth.
water from the filter.
tumble/spindry,
microwave
or
place
in
oven or on
direct heat.
Ensure the filter is
that moisture is
entirely
removed.
?
Dry
?
The air filter should be cleaned every 6 months.
so
rinse both
Shake off
cover.
in shade
Gently
Hand wash
figure.
Pull the dust filter out and the wash micro
filter
fill,
WARNING!
completely dry.
Re-assemble and place it back in your machine, filter frame.
If the filter is damaged, do not place them in the machine.
Please call the Helpline.
WARNING!
The
?
-
cleaning
Every
6 months
When the indicator
light
comes on
Exhaust filter
-
?
of the
Air filter
-
?
cycle
The exhaust filter should be cleand at least
once a
year
Dust Tank
-
When dusts
are
full
by the position
indirated
as
"MAX"
in the dust tank.
15
How to Use
the Exhaust Filter
Cleaning
White side
Filter
White side
White side
cover
?
The exhaust filter is
?
To clean the exhaust
washable reusable HEPA filter.
a
filter,
remove
the filter
WARNING!
cover on
the
?
?
?
?
body by rotating the filter cover counter clockwise.
Separate the filter assembled with the filter cover.
Wash the filter in flow water cleanly.
When you wash the
blue side.
filter,
make
sure
fully
in shade
?
don't wash the
-
?
that moisture is
?
Dry
?
The exhaust filter should be cleaned at least
so
entirely
removed.
once a
year.
of the
cleaning
Every
6 months
When the indicator
light
comes on
Exhaust filter
-
?
cycle
Air filter
-
Remove moisture.
it
The
The exhaust filter should be cleand at least
When dusts
are
full
by
the
position
indirated
in the dust tank.
?
Dust
adjusts the power according to the
amount of dust and will turn on by pressing AUTO button
on
?
the Dust Sensor
sensor
Dust
sensor
the handle control.
Wipe
or
mop the hole inside
(sensing part)
with
dry
cloth.
Dru rag
16
year
Dust Tank
-
Cleaning
once a
as
"MAX"
What to do if your
Check that the
vacuum
cleaner is
vacuum
in
plugged
Turn off the
?
Check the
?
Check that the dust tank is not full.
?
?
vacuum
cleaner and
telescopic pipe,
unplug
and that the electrical socket is
correctly
What to do when suction
?
cleaner does not work
it.
flexible hose and
pre-filter(air-filter)
decreases
performance
cleaning
tool for
blockages
if necessary.
Check that the exhaust filter is not blocked. Clean the exhaust
Check that the
working
or
obstructions.
Empty
is not full. Clean the
filter, if necessary.
pre-filter,
if necessary.
Thermal protector:
This
vacuum
If the cleaner
cleaner has
If these conditions
are
After the 30 minutes
contact
a
qualified
special
shuts
suddenly
Check the cleaner for
a
a
off,
possible
thermostat that
turn off the switch and
source
of
overheating
found, fix them and wait
period, plug
protects the cleaner in
unplug
such
overheating.
the cleaner.
as a
full dust
at least 30 minutes before
the cleaner back in and turn
of motor
case
on
tank,
a
blocked hose
attempting
to
use
or
clogged
filter.
the cleaner.
the switch. If the cleaner still does not run,
electrician.
WARNING!
Should it become necessary to
replace
the moulded
plug
then the detective
plug
should be
replaced by
a
qualified
electrician.
17
Note
18
Note
19
P/No.: 3828FI2863G
Made in KOREA
Download PDF

advertising