LG | VCQ783STU | LG V-CQ783STU Owner’s Manual

Model
NB-PJT
Language
Page
English
8 page
Weight:100g
Part No.
Color(cover/body)
Size(W*H)
2007.02.15
Designer
Material
Date
MFL30132613
one colour
210*150
Li ChunQi
V-CQ7**S**
V-CQ7**N**
E
English
Basic Parts
2
1
19 13
3
5
6
12
20
7
8
Optional Parts
The different figure and quantity of the following parts depend on
the different models which you have bought.
5
4
6
2
1
3
27
30
Accessory
These specifications are subject to change according to the agent/buyer's request.
9
10
–2–
11
2 13
5
4
6
9
11
7
10
8
13
14
12
15
16
MAX
13
17
18
MIN
19
21
20
22
25
23
24
26
27
29
28
-3-
E
Information for your safety
Please read all the following information,
which contains important instructions for the
safety, the use and the maintenance of the
appliance.
This appliance complies with the following EC
Directives: -73/23/EEC, 93/68/EEC-Low
Voltage Directive-89/336EEC -EMC Directive.
Never allow children to use the appliance
unsupervised.
The appliance is not intended for use by
young children or infirm persons without
supervision.
Do not use the appliance If the supply
cord is damaged or faulty.
If the main lead is damaged, it must be
replaced by an approved LG Electronics
Service Agent in order to avoid a hazard.
Always switch the vaccum cleaner off
before :
• changing the dust bag.
• changing or cleaning the filters.
If no dustbag is inserted, the cover
cannot be closed. Please do not use
force!
Do not vacuum flammable or explosive
substances(liquids or gases).
Do not vacuum hot ash, embers etc. nor
sharp objects.
Do not vacuum water or other liquids.
How to Use
Connecting the flexible hose
Push the end of the head(1) on the flexible
hose(2) into the attachment point on the
vacuum cleaner.
To remove the flexible hose from the vacuum
cleaner, press on the button(3) situated on the
head, then pull upwards.
Assembling the tubes
(depending on model)
• Metal and plastic tube(4)
- Fit together the tubes by twisting slightly.
• Telescopic tube(5)
- Push spring latch(6) forward.
- Pull out tube to required length.
- Release spring latch to lock.
Using the cleaning head and
Accessory Nozzles (depending on model)
Fit the large cleaning head onto the end of the tube.
• The 2 position head(7) is equipped with a
pedal(8) which allows you to alter its position
according to the type of floor to be cleaned.
Hard floor position(tiles, parquet floors...).
Press on the pedal to lower the brush.
Carpet or rug position. Press on the pedal
to lift the brush up.
• Crevice Tool(9)
For vacuuming in those normally inaccessible places i.e. reaching cobwebs, or down
the side of a sofa!
• Dusting brush(10)
For vacuuming picture frames furniture
outlines, books and other uneven objects.
(depending on model)
• Upholstery Nozzle(11)
For vacuuming uphostery, mattresses, etc.
The thread collectors help to pick up the
threads and fluff. (depending on model)
How to plug in and use
Pull out the supply cord to the desired length
and plug into the socket.
Press button (13) to start the vacuum cleaner.
To stop it press the button (13) again.
Adjusting the power level
• The flexible hose handle(14) has a manual
air flow regulator(15) which allows you to
briefly reduce the suction level.
• If your appliance is equipped with an
electronic variable power control(16), you
can choose the power appropriated for the
task. (depending on model)
Park-System(17)
For short breaks during vacuuming, for
example to move a small piece of furniture of a
rug, use the Park system to support the
flexible hose and cleaning head.
• Slide the hook attached to the large cleaning
tool into the slot on the rear of the appliance.
Storage(18)
When you have switched off and unplugged
the appliance, press on the button (12) to
automatically rewind the cord.
You can move or store your appliance in a
vertical position by sliding the hook on the
large cleaning head into the clip on the
underside of the appliance.
–4 –
E
Changing the dust bag
• The washable HEPA filter (26) should be
cleaned with water at least every 6 months.
The dustbag needs changing when the
cleaner is set to maximum power and the
cleaner head is off the floor but the “bag full”
indicator window(19) is completely coloured
red.
• Turbine brush nozzle (27)
(depending on model)
• Easy & Powerful cleaning through
adjusting the air-control lever (28).
Even if the dustbag does not appear to be full
at this stage, it should be changed.
It could be that a great deal of very fine dust
has clogged up the pores of the dust bag.
: use for hard floor & short
type carpet.
: use for long type carpet.
• Turn off the appliance and unplug it.
• Open the cover by pressing the hook(20) and
lifting it up until it snaps into place.
Your appliance is equipped with either a paper
dust bag (21) or a fabric dust bag (23)
(depending on model).
• Cleaning turbine brush nozzle (29)
Press the button the rear side of the
nozzle to separate the air cover.
Use the dusting brush & crevice tool
to vacuum clean the brush and fan.
• Take hold of the dust bag by the handle and
pull. Remove the bag and throw it away.
• You can perform cleaning at any place
like corner or crevice since revolution of
the suction hole is free (30).
(depending on model)
• To refit a new bag push the cardboard
support of a new bag into the bag mount (22)
until it will go no further.
What to do if your appliance
does not work?
If your appliance is fitted with a fab-ric
dust bag follow the same instructions as
Check that the appliance is correctly plugged
in and that the electrical socket is working.
above.
Empty it and replace it(23).
What to do when the suction
performance reduces?
Note: as the appliance is fitted with a safety
device which checks that the bag is in place
you cannot close the lid if the bag is not fitted
correctly.
Cleaning the motor filter
The motor filter is situated inside the appliance
between the dust bag and the motor. Each
time that you change the air outlet filter we
advise you to remove the motor filter(24) and
to clean it by tapping to remove the dirt and
then replacing it in the vacuum cleaner.
• Stop the appliance and unplug it.
• Check that the tubes, flexible hose and
cleaning tool are not blocked.
• Check that the dust bag is not full.
Replace if necessary.
Changing the air outlet filters(Optional)
• To change filter (26) remove the cover of
the filter compartment (25) situated at the
rear of the appliance.by pressing the little
button.
–5 –
P/No.:MFL30132613
Download PDF