LG V-KC661HTU Owner's Manual
Add to my manuals16 Pages
LG V-KC661HTU is a new type of cyclone vacuum cleaner. It comes with a carpet and floor nozzle, upholstery nozzle, dusting brush and crevice tool accessories. The carpet and floor nozzle has a pedal that allows you to adjust it for different types of flooring. The upholstery nozzle is designed for vacuuming upholstery, mattresses, and other soft surfaces. The dusting brush is perfect for vacuuming picture frames, furniture frames, books, and other delicate surfaces. The crevice tool is ideal for vacuuming in hard-to-reach places, such as corners and crevices.
advertisement
▼
Scroll to page 2
of 16
OWNER'S MANUAL V-KC661H** New Type Cyclone Please read all of the information This information contains vacuum on important page 3 cleaner carefully. instructions for the safe use and the maintenance of the appliance. P/No 3828Fi2866Q Table of contents Information for Your How to Use Assembling Safety .............................................................................. ...................................................................................................... Cleaner Vacuum Cleaner ........................................................................................... Operation Using the Carpet Using the Accessory Using the Air Turbine Brush ............................................................................... and floor nozzle Nozzles .......................................................................... ............................................................................... .................................................................................. Emptying the Dust Tank Cleaning the Dust Tank Cleaning the Air Filter and the Motor Cleaning the Exhaust Filter .................................................................................... .................................................................................... safety filter ..................................................... ................................................................................. What to do if your Vacuum Cleaner does not work What to do when suction performance 2 P/No 3828Fi2866Q decreases .......................................... ........................................... 3 4 4 6 7 8 9 10 11 12 13 14 14 Information for Your Safety Please read all the of the This following information, which contains important instructions for the safety, the use and the maintenance appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive. The appliance is not intended for Young Children If the appliance should be is use supervised by young to children ensure that infirm persons without or they do not appliance. supervision. play with appliance. supplied from a cord extension set or an electrical portable outlet device, the positioned so that it is not subject to aplashing or ingress of moisture. cord extension set on electrical portable outlet device must be Do not the use vacuum as a Do not continue to vacuum toy, injury could result. if any defect appears, Repairs, when necessary, must be performed Only use parts produced or recommended by Do not use without the dust tank Do not use the it must be Do not Always turn the Emptying ? Cleaning ? LG Electronics Service Agent. LG air filter. or damaged, unplug by pulling on cord. pull on the supply cord, run ? missing or damaged. In these cases, contact an approved approved LG Electronics Service Agent. doing otherwise could invalidate your guarantee. an cleaner If the power cord is vacuum If the power cord is Do not at over damaged or faulty. replaced by an approved LG Electronics it, pull it around sharp edges or Service Agent to avoid a hazard. near/over hot surfaces. cleaner off before: vacuum the dust tank. or Romoving the filter. changing from the mains outlet. Do not leave vacuum the cleaner with the Do not use Do not put any part of the Do not use Do not vacuum hot Do not vacuum flammable Do not vacuum water plug connected to a mains outlet-unplug when not in use. openings blocked with any object that may restrict the airflow. body, colthes or any object (e.g. stick) into the opening or moving parts of the with any of the vacuum cleaner. outdoors. ash, embers etc. or sharp objects. explosive substances(liquids other liquids. or Do not handle the cleaner or or plug or gases). with wet hands. Do not immerse the whole cleaner in water. Do not ? cleaner without use vacuum When you vacuum with Do not reach into the Do not Thermal running vacuum protector: This If the cleaner repaired if it was under water. appliance that has a rotating attachment brush roller: brush roller. fine dust vacuum Do not expose an If these conditions are After the 30 minutes vacuum shuts suddenly Check the cleaner for cleaner to heat a off, possible cleaner has a source of overheating found, fix them and wait period, plug special turn off the switch and thermostat that unplug such protects the cleaner in as a full dust at least 30 minutes before the cleaner back in and turn case of motor overheating. the cleaner. on tank, a blocked hose attempting to use or clogged filter. the cleaner. the switch. If the cleaner still does not run, contact a qualified electrician. 3 P/No 3828Fi2866Q How to Use Assembling Fit the nozzle onto the end of the Cleaner pipe. Hose Handle 2 Spring latch Click! Telescopic pipe 1 ? Carpet and floor nozzle Push the nozzle onto the telescopic pipe. Carpet and floor nozzle ? Press the ? Pull out the ? P/No 3828Fi2866Q Air turbine brush Telescopic pipe ? 4 ? spring latch to release. pipe to the desired length. Release spring latch to lock the pipe in position. Push telescopic pipe into hose handle firmly. Click! Fitting pipe Flexible Hose Button 3 Attachment Point Connecting Push the fitting pipe point on attachment To the hose to the cleaner remove on the the flexible hose into the vacuum cleaner. the flexible hose from the vacuum cleaner,press on the button situated on the fitting pipe, then pull the pipe out of the vacuum cleaner. 5 P/No 3828Fi2866Q How to Use Vacuum Cleaner Operation Suction control Slide knob 2 1 3 4 FLOOR MAX CARPET SOFA CURTAIN MIN OFF Plug Cord reel button Indicator How to ? Plug in and Use Pull out the power cord to length and plug Adjusting ? the desired into the socket. ? ? suction power with the suction control slide knob in Adjust Park ? the hose handle. Push the suction control ? The indicator is lighted switch of the handle in the when the Dust Tank is direction of the filled with position what you want. To stop it,push down the suction control switch in the ? the Suction power or on closely Air filter is clogged. Empty the Dust Tank and clean the Air filter. ? The indicator could be direction of OFF. when Press the cord reel button to time clean the Air filter. retract the power cord after sucking ? fine dust. At this Storage To store after ? vacuuming and pause while vacuuming. For deposit after vacuuming, for example to move a small piece of furniture or a lighted System rug,use the Park to support the system flexible hose and cleaning - head. Slide the hook on the side of the dust tank. 6 P/No 3828Fi2866Q unplugged the appliance,press the the cord reel button to automatically rewind the cord. ? You can store your appliance in a vertical position by sliding the hook on nozzle into the slot use. When you have switched off and on the nozzle head into the clip on the underside of the appliance. How to Use Using the Carpet and floor nozzle 1 Carpet ? Cleaning carpet and floor nozzle Pedal Floor Carpet ? The 2 position cleaning head equipped with a pedal which allows you to alter its position according to the ? and floor nozzle type of floor Carpet rug position pedal to lower Hard floor position (tiles,parquets floor) Both or types are ? Divide the nozzle into two ? Clean the hole of the nozzle. cover by pulling the hook. Open parts to be cleaned. Press the ? the ? brush. available. 7 P/No 3828Fi2866Q How to Use Upholstery Using the nozzle Accessory Dusting 2 Nozzles brush Crevice tool 3 Nozzle Upholstery 4 Dusting Upholstery Nozzle is for vacuuming upholstery, Dusting Brush is for vacuuming picture mattresses,etc. The thread frames, furniture frames,books and other collectors help to pick up the threads and fluff. irregular Crevice Tool Brush Crevice Tool is for vacuuming in those normally hard-to-reach places such as reaching surfaces. cobwebs,or between the cushions of a sofa. WARNING You must use accessory nozzles in curtain mode. FLOOR ?BOX? CARPET SOFA ? Accessory CURTAIN nozzles include in the "PE BAG" with owner's manual. 8 P/No 3828Fi2866Q OFF Holder How to Use Using the Air Turbine Brush 5 Pile Long Adjustment Pile Short Pile Air Turbine Brush ? Slide the Pile long pile Adjustment to the and to the left for short right pile. for 9 P/No 3828Fi2866Q How to Use Emptying the Dust Tank Tank handle Dust Tank Pull out PUSH Dust Tank Separation ? on emptying the dust tank Turn off the button Lever The dust tank needs position emptying vacuum or when dust reaches the "MAX" indicator is lighted on. unplug it. and then push the tank CAUTION cleaner and ? Grasp the handle separation lever. of the tank ? Pull out the tank. ? Empty ? Push the dust tank into the tank mount ? filter. ? the tank and then Suction power may be weakened when insignificant dusts are sucked. In this case,clean the air filter and the motor safety push the tank into the cleaner. as far as After Page12 emptying the dust tank the indicator is ? When the Next page indicator continues to twinkle for 90 seconds,the suction (from overheating). Moving ? Tank handle 10 P/No 3828Fi2866Q Carrier handle on(Red light)or twinkles, clean the air guide and the dust tank. it will go. will become low to protect the motor the cleaner Don't grasp the tank handle when you are moving the Cleaner. The cleaner's body may be fell down with separating tank and body. You should grasp moving the cleaner. the carrier handle when you are How to Use Cleaning the Dust Tank Dust emptying button Pull out Tank Separation Lever Air guide Dust tank cap Dust separating button lighted on after emptying the dust tank. lighted on when dust tank is not filled,firstly clean the dust tank and air guide as follows. Press the lever of tank handle and pull the dust tank out. Empty dust tank by pressing the dust emptying button as figure. Open the dust tank cap by pushing the cap separating button. Rotate the air guide by counter clock wise and pull it out of the dust tank. The air guide is located in the center of dust tank. Wash tank and air guide with water. Dry those fully in shade so that moisture is entirely removed. Push Check the indicator is CAUTION If the indicator is After emptying the dust tank the indicator on(Red light)or twinkles,clean the dust tank. ? ? is lighted ? ? ? ? Dust tank cap ? ? assembling The hook of the dust tank cap fits the groove of dust tank. Push the dust tank cap until the button of the dust tank assemble the dust tank cap. Air ? ? guide assembling Adjust the arrow on air guide to the rib of the dust tank. Join the air guide to the dust tank by rotating it clock wise. Rib Hook Groove 11 P/No 3828Fi2866Q How to Use Cleaning the Air filter and the Motor safety filter Air filter Motor lighted on after cleaning the dust tank ,clean safety filter. The air filter and motor safety filter are located at the bottom of dust tank cap in above figure. Push the cap separating button of the tank and separate the safety filter If the indicator is WARNING! the air filter and motor Gently rinse both until the water parts separately under runs a cold running water clear. ? ? ? ? dust tank cap. Separate the air filter Motor filter is assembled in the bottom of the cap Wash those with water safety ? Dry those fully ? The air filter and motor in shade so that moisture is entirely removed. safety filter should be cleaned with standard cycle of cleaning those parts are above case, but every 6 months at least. 12 P/No 3828Fi2866Q Hand wash only oven or on damp cloth. Shake off excess water tumble/spindry,microwave or place in with from the filter. Do not direct heat. Ensure the filter is completely dry. Re-assemble and place it back in your machine,filter frame. If the filter is damaged,do not place them in the machine. Please call the The standard filter - Every Helpline. cycle of cleaning 6 months the air filter and motor safety How to Use Exhaust filter Cleaning the Exhaust Filter cover White side ? The exhaust filter is ? To clean the exhaust White side White side washable and reusable HEPA filter. a filter,remove the Exhaust filter ? ? ? body by rotating it counter clockwise. Separate the filter assembled with the filter cover. Wash the filter in flow water cleanly. When you wash the filter,make sure you should cover on WARNING! the The exhaust filter should be cleand at least once a year. not wash the blue side. ? Remove moisture. it fully in shade that moisture is ? Dry ? The exhaust filter should be cleaned at least Exhaust filter cover ? The exhaust filter ? Join it to the so entirely removed. once a year. assembling cover fits the grooves. it clockwise. body by rotating Groove 13 P/No 3828Fi2866Q What to do if your vacuum Check that the plugged vacuum cleaner is in What to do when suction ? Turn off the ? Check the ? Check that the dust tank is not full. ? ? cleaner and vacuum telescopic pipe, unplug cleaner does not work correctly and that the electrical socket is performance working. decreases it. flexible hose and Empty cleaning tool for blockages or obstructions. if necessary. Check that the exhaust filter is not blocked. Clean the exhaust filter, if necessary. Check that the Thermal This pre-filter(air-filter) is not full. Clean the pre-filter, if necessary. protector: vacuum If the cleaner cleaner has a special thermostat that protects the cleaner in case of motor overheating. shuts off,turn off the switch and unplug the cleaner. Check the cleaner for a possible source of overheating such as a full dust tank,a blocked hose suddenly If these conditions are After the 30 minutes found,fix them and wait period,plug at least 30 minutes before the cleaner back in and turn on attempting to use or clogged filter. the cleaner. the switch.If the cleaner still does not run, contact a qualified electrician. WARNING! Should it become necessary to electrician. replace qualified 14 P/No 3828Fi2866Q the moulded plug then the detective plug should be replaced by a MEMO 15 P/No 3828Fi2866Q P/No.: 3828FI2866Q Made in KOREA P/No 3828Fi2866Q
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project