LG | V-KC661HTU | LG V-KC661HTU Owner’s Manual

OWNER'S MANUAL
V-KC661H**
New Type
Cyclone
Please read all of the information
This information contains
vacuum
on
important
page 3
cleaner
carefully.
instructions for the safe
use
and the maintenance of the
appliance.
P/No 3828Fi2866Q
Table of contents
Information for Your
How to Use
Assembling
Safety
..............................................................................
......................................................................................................
Cleaner
Vacuum Cleaner
...........................................................................................
Operation
Using
the
Carpet
Using
the
Accessory
Using
the Air Turbine Brush
...............................................................................
and floor nozzle
Nozzles
..........................................................................
...............................................................................
..................................................................................
Emptying
the Dust Tank
Cleaning
the Dust Tank
Cleaning
the Air Filter and the Motor
Cleaning
the Exhaust Filter
....................................................................................
....................................................................................
safety
filter
.....................................................
.................................................................................
What to do if your Vacuum Cleaner does not work
What to do when suction
performance
2
P/No 3828Fi2866Q
decreases
..........................................
...........................................
3
4
4
6
7
8
9
10
11
12
13
14
14
Information for Your
Safety
Please read all the
of the
This
following information, which contains important instructions for the safety, the use and the maintenance
appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC
Directive.
The
appliance
is not intended for
Young Children
If the appliance
should be
is
use
supervised
by young
to
children
ensure
that
infirm persons without
or
they
do not
appliance.
supervision.
play with appliance.
supplied from a cord extension set or an electrical portable outlet device, the
positioned so that it is not subject to aplashing or ingress of moisture.
cord extension set
on
electrical
portable
outlet device must be
Do not
the
use
vacuum as a
Do not continue to
vacuum
toy, injury could result.
if any defect appears,
Repairs, when necessary, must be performed
Only use parts produced or recommended by
Do not
use
without the dust tank
Do not
use
the
it must be
Do not
Always
turn the
Emptying
?
Cleaning
?
LG Electronics Service
Agent.
LG
air filter.
or
damaged,
unplug by pulling on cord.
pull on the supply cord, run
?
missing or damaged. In these cases, contact an approved
approved LG Electronics Service Agent.
doing otherwise could invalidate your guarantee.
an
cleaner If the power cord is
vacuum
If the power cord is
Do not
at
over
damaged or faulty.
replaced by an approved LG Electronics
it, pull it around sharp edges
or
Service
Agent to
avoid
a
hazard.
near/over hot surfaces.
cleaner off before:
vacuum
the dust tank.
or
Romoving
the filter.
changing
from the mains outlet.
Do not leave
vacuum
the
cleaner with the
Do not
use
Do not
put any part of the
Do not
use
Do not
vacuum
hot
Do not
vacuum
flammable
Do not
vacuum
water
plug connected to a mains outlet-unplug when not in use.
openings blocked with any object that may restrict the airflow.
body, colthes or any object (e.g. stick) into the opening or moving parts of the
with any of the
vacuum
cleaner.
outdoors.
ash, embers
etc. or sharp objects.
explosive substances(liquids
other liquids.
or
Do not handle the cleaner
or
or
plug
or
gases).
with wet hands.
Do not immerse the whole cleaner in water.
Do not
?
cleaner without
use vacuum
When you
vacuum
with
Do not reach into the
Do not
Thermal
running
vacuum
protector: This
If the cleaner
repaired if it was under water.
appliance that has a rotating
attachment
brush roller:
brush roller.
fine dust
vacuum
Do not expose
an
If these conditions
are
After the 30 minutes
vacuum
shuts
suddenly
Check the cleaner for
cleaner to heat
a
off,
possible
cleaner has
a
source
of
overheating
found, fix them and wait
period, plug
special
turn off the switch and
thermostat that
unplug
such
protects the cleaner in
as a
full dust
at least 30 minutes before
the cleaner back in and turn
case
of motor
overheating.
the cleaner.
on
tank,
a
blocked hose
attempting
to
use
or
clogged
filter.
the cleaner.
the switch. If the cleaner still does not run, contact
a
qualified
electrician.
3
P/No 3828Fi2866Q
How to Use
Assembling
Fit the nozzle onto the end of the
Cleaner
pipe.
Hose Handle
2
Spring
latch
Click!
Telescopic pipe
1
?
Carpet
and floor nozzle
Push the nozzle onto
the
telescopic pipe.
Carpet
and floor nozzle
?
Press the
?
Pull out the
?
P/No 3828Fi2866Q
Air turbine brush
Telescopic pipe
?
4
?
spring latch to release.
pipe to the desired length.
Release spring latch to lock the pipe in position.
Push telescopic pipe into hose handle firmly.
Click!
Fitting pipe
Flexible Hose
Button
3
Attachment Point
Connecting
Push the
fitting pipe
point on
attachment
To
the hose to the cleaner
remove
on
the
the flexible hose into the
vacuum
cleaner.
the flexible hose from the
vacuum
cleaner,press on the button situated on the fitting
pipe, then pull the pipe out of the vacuum cleaner.
5
P/No 3828Fi2866Q
How to Use
Vacuum Cleaner
Operation
Suction control Slide knob
2
1
3
4
FLOOR
MAX
CARPET
SOFA
CURTAIN
MIN
OFF
Plug
Cord reel
button
Indicator
How to
?
Plug
in and Use
Pull out the power cord to
length and plug
Adjusting
?
the desired
into the socket.
?
?
suction power with the
suction control slide knob in
Adjust
Park
?
the hose handle.
Push the suction control
?
The indicator is
lighted
switch of the handle in the
when the Dust Tank is
direction of the
filled with
position
what
you want.
To stop it,push down the
suction control switch in the
?
the Suction power
or
on
closely
Air filter is
clogged. Empty
the Dust Tank
and clean the Air filter.
?
The indicator could be
direction of OFF.
when
Press the cord reel button to
time clean the Air filter.
retract the power cord after
sucking
?
fine dust. At this
Storage
To store after
?
vacuuming and pause
while vacuuming.
For deposit after
vacuuming, for
example to move a
small piece of furniture
or a
lighted
System
rug,use the Park
to support the
system
flexible hose and
cleaning
-
head.
Slide the hook
on
the side of the
dust tank.
6
P/No 3828Fi2866Q
unplugged the
appliance,press
the
the
cord reel button to
automatically
rewind
the cord.
?
You
can
store your
appliance in a vertical
position by sliding the
hook
on
nozzle into the slot
use.
When you have
switched off and
on
the nozzle
head into the
clip
on
the underside of the
appliance.
How to Use
Using
the
Carpet
and floor nozzle
1
Carpet
?
Cleaning carpet
and floor nozzle
Pedal
Floor
Carpet
?
The 2
position cleaning head
equipped with a pedal which allows
you to alter its position according to
the
?
and floor nozzle
type of floor
Carpet
rug position
pedal to lower
Hard floor position
(tiles,parquets floor)
Both
or
types
are
?
Divide the nozzle into two
?
Clean the hole of the nozzle.
cover
by pulling
the hook.
Open
parts
to be cleaned.
Press the
?
the
?
brush.
available.
7
P/No 3828Fi2866Q
How to Use
Upholstery
Using
the
nozzle
Accessory
Dusting
2
Nozzles
brush
Crevice tool
3
Nozzle
Upholstery
4
Dusting
Upholstery Nozzle is for
vacuuming upholstery,
Dusting Brush is for
vacuuming picture
mattresses,etc. The thread
frames, furniture
frames,books and other
collectors
help
to
pick
up the
threads and fluff.
irregular
Crevice Tool
Brush
Crevice Tool is for
vacuuming in those
normally hard-to-reach
places such as reaching
surfaces.
cobwebs,or between the
cushions of
a
sofa.
WARNING
You must use accessory
nozzles in curtain mode.
FLOOR
?BOX?
CARPET
SOFA
?
Accessory
CURTAIN
nozzles
include in the "PE BAG"
with owner's manual.
8
P/No 3828Fi2866Q
OFF
Holder
How to Use
Using
the Air Turbine Brush
5
Pile
Long
Adjustment
Pile
Short Pile
Air Turbine Brush
?
Slide the Pile
long pile
Adjustment
to the
and to the left for short
right
pile.
for
9
P/No 3828Fi2866Q
How to Use
Emptying
the Dust Tank
Tank handle
Dust Tank
Pull out
PUSH
Dust
Tank
Separation
?
on
emptying
the dust tank
Turn off the
button
Lever
The dust tank needs
position
emptying
vacuum
or
when dust reaches the "MAX"
indicator is
lighted on.
unplug it.
and then push the tank
CAUTION
cleaner and
?
Grasp the handle
separation lever.
of the tank
?
Pull out the tank.
?
Empty
?
Push the dust tank into the tank mount
?
filter.
?
the tank and then
Suction power may be weakened when insignificant dusts are
sucked. In this case,clean the air filter and the motor safety
push
the tank into the cleaner.
as
far
as
After
Page12
emptying the
dust tank the indicator is
?
When
the
Next page
indicator continues to twinkle for 90
seconds,the suction
(from overheating).
Moving
?
Tank handle
10
P/No 3828Fi2866Q
Carrier handle
on(Red light)or
twinkles, clean the air guide and the dust tank.
it will go.
will become low to
protect the
motor
the cleaner
Don't grasp the tank handle when you are moving the Cleaner.
The cleaner's body may be fell down with separating tank and
body. You should grasp
moving the cleaner.
the carrier handle when you
are
How to Use
Cleaning
the Dust Tank
Dust
emptying
button
Pull out
Tank
Separation
Lever
Air
guide
Dust tank cap
Dust
separating
button
lighted on after emptying the dust tank.
lighted on when dust tank is not filled,firstly clean
the dust tank and air guide as follows.
Press the lever of tank handle and pull the dust tank out.
Empty dust tank by pressing the dust emptying button as figure.
Open the dust tank cap by pushing the cap separating button.
Rotate the air guide by counter clock wise and pull it out of the
dust tank. The air guide is located in the center of dust tank.
Wash tank and air guide with water.
Dry those fully in shade so that moisture is entirely removed.
Push
Check the indicator is
CAUTION
If the indicator is
After
emptying the dust tank the indicator
on(Red light)or twinkles,clean the dust tank.
?
?
is
lighted
?
?
?
?
Dust tank cap
?
?
assembling
The hook of the dust tank cap fits the groove of dust tank.
Push the dust tank cap until the button of the dust tank
assemble the dust tank cap.
Air
?
?
guide assembling
Adjust the arrow on air guide to the rib of the dust tank.
Join the air guide to the dust tank by rotating it clock wise.
Rib
Hook
Groove
11
P/No 3828Fi2866Q
How to Use
Cleaning
the Air filter and the Motor
safety
filter
Air filter
Motor
lighted on after cleaning the dust tank ,clean
safety filter.
The air filter and motor safety filter are located at the bottom of
dust tank cap in above figure.
Push the cap separating button of the tank and separate the
safety filter
If the indicator is
WARNING!
the air filter and motor
Gently
rinse both
until the water
parts separately under
runs
a
cold
running
water
clear.
?
?
?
?
dust tank cap.
Separate the air filter
Motor
filter is assembled in the bottom of the cap
Wash those with water
safety
?
Dry those fully
?
The air filter and motor
in shade
so that moisture is entirely removed.
safety filter should be cleaned with
standard cycle of cleaning those parts are
above case, but
every 6 months at least.
12
P/No 3828Fi2866Q
Hand wash
only
oven or on
damp cloth. Shake off excess water
tumble/spindry,microwave or place in
with
from the filter. Do not
direct heat.
Ensure the filter is
completely dry.
Re-assemble and
place
it
back in your machine,filter frame.
If the filter is damaged,do not place them in the machine.
Please call the
The standard
filter
-
Every
Helpline.
cycle of cleaning
6 months
the air filter and motor
safety
How to Use
Exhaust filter
Cleaning
the Exhaust Filter
cover
White side
?
The exhaust filter is
?
To clean the exhaust
White side
White side
washable and reusable HEPA filter.
a
filter,remove the Exhaust filter
?
?
?
body by rotating it counter clockwise.
Separate the filter assembled with the filter cover.
Wash the filter in flow water cleanly.
When you wash the filter,make sure you should
cover on
WARNING!
the
The exhaust filter should be cleand at least
once a
year.
not
wash the blue side.
?
Remove moisture.
it
fully
in shade
that moisture is
?
Dry
?
The exhaust filter should be cleaned at least
Exhaust filter
cover
?
The exhaust filter
?
Join it to the
so
entirely
removed.
once a
year.
assembling
cover
fits the grooves.
it clockwise.
body by rotating
Groove
13
P/No 3828Fi2866Q
What to do if your
vacuum
Check that the
plugged
vacuum
cleaner is
in
What to do when suction
?
Turn off the
?
Check the
?
Check that the dust tank is not full.
?
?
cleaner and
vacuum
telescopic pipe,
unplug
cleaner does not work
correctly
and that the electrical socket is
performance
working.
decreases
it.
flexible hose and
Empty
cleaning
tool for
blockages
or
obstructions.
if necessary.
Check that the exhaust filter is not blocked. Clean the exhaust filter, if necessary.
Check that the
Thermal
This
pre-filter(air-filter)
is not full. Clean the
pre-filter,
if necessary.
protector:
vacuum
If the cleaner
cleaner has
a
special
thermostat that
protects the cleaner in
case
of motor
overheating.
shuts off,turn off the switch and unplug the cleaner.
Check the cleaner for a possible source of overheating such as a full dust tank,a blocked hose
suddenly
If these conditions
are
After the 30 minutes
found,fix them and wait
period,plug
at least 30 minutes before
the cleaner back in and turn
on
attempting
to
use
or
clogged
filter.
the cleaner.
the switch.If the cleaner still does not run, contact
a
qualified
electrician.
WARNING!
Should it become necessary to
electrician.
replace
qualified
14
P/No 3828Fi2866Q
the moulded
plug
then the detective
plug
should be
replaced by
a
MEMO
15
P/No 3828Fi2866Q
P/No.: 3828FI2866Q
Made in KOREA
P/No 3828Fi2866Q
Download PDF

advertising