LG | VR6340LV | Owner's Manual | LG VR6340LV Owner’s Manual

LG VR6340LV Owner’s Manual
OWNER’S MANUAL
CLEANING ROBOT
Before using, please carefully read the Safety Precautions pages to allow for safe
operation of the product. After reading this manual, please keep it in an easily
accessible location.
VR634* ser.
VR635* ser.
www.lg.com
FEATURES
Corner Master
By having adopted a brand new concept design that is appropriate for walls,
the Robot Cleaner's cleaning performance is incredibly efficient.
Learning Mode
The Robot Cleaner is capable of memorizing the cleaning environment
via its Smart Operation feature for smarter cleaning.
Turbo Mode
In the "Turbo" mode, the Robot Cleaner operates the suction motor and the brushes
at a greater speed giving cleaner results.
Drawer Mop Plate (Option)
The "Drawer mop plate" makes it much easier for users to fit and remove the mop
without having to turn over the device over.
My Space Mode
By commanding it to clean a particular area, the Robot Cleaner quickly cleans
that desired area.
Repeat Cleaning
The Robot Cleaner will continuously clean until the battery runs out.
Location Search Function
If the Robot Cleaner is moved from a spot while operating, the device will automatically
search for the previous location and return to the spot from where it was interrupted.
CONTENTS
1
BEFORE USING
2~5
Safety precautions
6
Included with product
7~8
Parts description
9~10 Button functions
11
Display status information
12
Before you start
13
Overview
2
METHOD OF USE
14
15
16
17
18~19
20
21
22
23~24
How to install the home station
How to turn the Robot Cleaner power supply on & off
How to start and stop cleaning
How to charge the battery
Cleaning modes
Auxiliary cleaning modes
Mop cleaning (option)
Location search function
Smart diagnosis
3
HANDLING METHOD AFTER USE
25
26
27
28
29
30
Cleaning the dust bin
Cleaning the dust bin filter
Cleaning the brush
Cleaning the sensors/charging terminals
Cleaning the side brush
Cleaning the ultra microfiber mop (option)
4
ADDITIONAL INFORMATION
31~33 Troubleshooting
Before you call for service
34
5
REFERENCE
35
Product specifications
36
Reference items
SAFETY PRECAUTIONS
The purpose of the safety precautions described below is for the user to use the product safely and correctly to prevent any
unexpected risk of injury or damage.
Basic safety precautions
After reading this manual, please keep it in an easily accessible location.
This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property damage
and/or serious bodily harm or death.
WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
WARNING
1. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play
with the appliance.
3. If the supply cord is damaged, it must be replaced by LG
Electronics Service Agent in order to avoid a hazard
4. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance must not be made by children without supervision.
For your safety, do not remove the battery
from the Robot Cleaner. If you need to
replace the battery of the Robot Cleaner,
take it to the nearest authorized LG
Electronics service center or dealer for
assistance.
Failure to follow this warning can cause fire
or product failure.
2
Never use the Robot Cleaner with a
battery and/or home station from any
other product than the
Robot Cleaner.
Doing so can cause fire or product failure.
SAFETY PRECAUTIONS
WARNING
Make sure the power cord of the home
station is not crushed under a heavy
object or damaged by contact with sharp
objects.
Do not use the Robot Cleaner when
candles or fragile objects are placed on
the floor.
Doing so can cause fire or product failure.
Failure to follow this warning can cause
electric shock, fire or product failure. If the
power cord is broken, do not plug it in. Take
the product to an LG Electronics Authorised
service repairer.
Do not place the home station and the
Robot Cleaner near a heating device.
Always use a dedicated power outlet with
a 10 amp rating.
Doing so can cause product deformation,
fire, or product failure.
If multiple appliances are connected to an
outlet simultaneously, they can generate
enough heat to cause a fire.
Do not force the power plug to bend. Do
not use the power plug when it has been
damaged or loosened.
When pulling out the home station power
plug, always pull it out by grabbing the
plug, not the cord. When pulling out the
power plug, do not to touch the prongs
with your fingers.
Doing so can cause fire or product failure.
Doing so can cause an electric shock.
Do not touch the power plug with wet
hands.
Doing so can cause electric shock.
Do not allow children or pets to play with
or rest upon the Robot Cleaner at any
time. Do not use the Robot Cleaner while
an object is hanging from it.
Doing so can cause injury or product
damage.
Gasoline
Detergent
Do not spray or use inflammable materials,
surfactants, or drinking water in the
vicinity of the Robot Cleaner.
Doing so can cause fire or product failure.
* Inflammable materials: gasoline, thinner,
etc.
* Surfactant: detergent, articles for bath,
etc.
Do not insert any part of the body, such as
a hand or foot, below the brush or wheels
of the
Robot Cleaner while in use.
Turn the power supply off immediately
if any abnormal sound, odor, or smoke
is generated from the Robot Cleaner by
removing it from the home station and
turning off the main switch on the rear
side of the unit.
Failure to do so can cause fire or product
failure.
Do not operate the Robot Cleaner in a
room where a child is sleeping.
Doing so can cause injury or product
damage.
Doing so can cause injury or product
damage.
Do not operate the Robot Cleaner on
narrow and high furniture such as a
wardrobe, refrigerator, desk, table, etc.
Doing so can cause injury, product failure
or damage which is not covered by the
warranty.
Do not activate the device on a floor that
has more than a 10 degree incline.
The device may not work properly.
Do not leave Children or pets near the
Robot Cleaner unsupervised.
Doing so can cause injury or product
damage.
T his product is intended for indoor domestic home use and
should not be used in mobile applications. it should not be used in
commercial applications such as workshops or garages or around
indoor swimming pools, etc.
3
SAFETY PRECAUTIONS
CAUTION
Frequently empty the dust bin and
maintain its cleanliness.
Do not drop the Robot Cleaner or subject
it to strong impacts.
The dust collected in the dust bin can
trigger allergies and may contain harmful
insects. it should be cleaned after each use.
Doing so can cause injury or product failure
not covered by the warranty.
Use the Robot Cleaner indoors only.
Do not expose the Robot Cleaner to cold
temperatures (less than 10 C) for a long
period of time.
Using it outdoors can cause product failure
and irreparable damage to the unit.
Doing so can cause product failure.
Close the cover of the dust bin on the
main unit before starting cleaning.
Remove any cables or string from the floor
before starting.
If the cover is not closed, it can cause injury
or product damage.
Cable or string can get tangled in the
wheels of Robot Cleaner and cause product
failure or the cord of an appliance can be
disconnected.
DO NOT use the Robot Cleaner around a
banister, staircase or any other dangerous
place.
Make sure the Robot Cleaner is not put on
a table or desk, with the power ON.
Doing so could cause injury or damage to
the unit.
It may result in an injury or damage to the
product.
In rare cases, the Robot Cleaner’s brush
can damage carpet. If this happens,
immediately stop the cleaning operation.
Do not allow the Robot Cleaner to sweep
up liquids, blades, thumb tacks, sharp
objects or ashes, hot or cold, etc.
When a carpet has long tassels, the tassels
can be damaged.
These items can cause product failure or
damage.
Do not let the main unit and charging
terminal of the home station come into
contact with metallic objects.
Do not put sharp objects into the opening
of the Robot Cleaner’s ultrasonic sensors.
Doing so can cause product failure.
Doing so can cause product failure.
4
Do not put water, detergent, etc. into or
onto the Robot Cleaner.
Do not use the Robot Cleaner when the
dust bin is completely full.
Doing so can cause product failure. Do not
put any water or detergent on the Robot
Cleaner. If liquids get inside of the Robot
Cleaner, turn off the power supply and
contact an LG Electronics sales agent or
customer care center.
Doing so can cause product failure.
SAFETY PRECAUTIONS
CAUTION
If the floor is wet or has wet spots, wipe
them up before using the Robot Cleaner.
Do not use the Robot Cleaner on a wet
surface.
Doing so can cause product failure.
When attaching the mop, ensure that it is
fitted correctly so that it does not block
the lower camera sensor.
Blocking the bottom camera sensor may
not allow the product to work correctly.
(Some models may not have the sensor.)
When the robot cleaner is operating, it
may hit the chair leg, desk leg, table leg or
other narrow pieces of furniture.
For quicker and better cleaning, place the
dining chairs on top of the dining table.
NOTE: Very low thresholds will allow the
Robot cleaner to go over them and perhaps
into an undesirable location. Make sure that
all the doors of the rooms that are not to
be cleaned are closed.
To save energy when the Roboking is not
in use for longer periods, turn off the
power switch, and turn on the power
switch again just prior to using the Robot
cleaner again.
Tip
Check the following items before use:
• Empty the dust bin after each operation or prior to it filling up.
• Remove any cables or long strings from the floor.
• Remove any moisture from the floor before cleaning.
• Close the cover of the dust bin before cleaning.
• Remove fragile or unnecessary objects from the room to be cleaned.
For example, remove expensive ceramics and valuables from the floor.
• Confirm whether the battery has sufficient power, and if it is low, recharge it.
• Close the doors of any room that you do not want the Robot Cleaner to enter.
During cleaning, the Robot Cleaner may enter another room and continue cleaning.
• Do not use this product in the room where a child is sleeping alone. The child can be hurt or woken.
• Remove towels, foot towel or any other thin cloth from the floor as they can get caught by the brush.
• Before starting the device, it's better to remove carpets that are thicker than 20 mm
as they may cause it to malfunction.
• Please close any balcony doors as the wheels may get stuck while cleaning.
5
INCLUDED WITH PRODUCT
Robot Cleaner
Remote controller
Home station
s Figures can be different from actual objects.
GUIDE D'UTILISATION
ASPIRATEUR ROBOT
GUIDE RAPIDE
ASPIRATEUR ROBOT
Ce guide décrit brièvement comment utiliser l'aspirateur robot.
Pour plus de détails, veuillez consulter le manuel de l'utilisateur.a
Veuillez lire attentivement ce qui suit avant d'installer et de mettre en service le produit.
Avant toute utilisation, lisez attentivement la rubrique "Précautions
relatives à la sécurité" pour le bon fonctionnement du produit.
Après avoir lu le manuel d'utilisation, conservez-le dans un endroit
facilement accessible à tout moment.
www.lg.com
www.lg.com
Cleaning Tool
Dust bin filter
(spare) (option)
Mop plate (option)
Quick guide
Operation manual
Ultra microfiber mop
(2 pieces) (option)
for cleaning
sensors
for cleaning
the filter
Cleaning brush
(It’s on the dust bin cover)
6
Batteries for remote controller
(2 units of AAA size)
PARTS DESCRIPTION - ROBOT CLEANER
Plan view
Upper camera sensor
Dust bin cover
Display & function buttons
Dust bin compartment release button
Front view
Ultrasonic sensors
Obstacle detecting sensor window Detecting
sensors of home station & Receiving sensors of
remote controller
Rear view
Main Power switch
Ventilation port
Bottom view
Cliff detection sensors
Side brush
Charging terminals
Brush
Wheel
Battery housing
Lower camera sensor (option)
s Figures can be different from actual objects.
7
PART DESCRIPTION – HOME STATION / DUST BIN
Home station
Remote controller holder
Charging terminals
Power switch
Power cord fixing hook
Dust bin
Dust bin handle
Cleaning brush
Dust bin lid
Suction port flap
Sponge filter
Dust bin lid
opening button
HEPA filter
Filter cover
8
s Figures can be different from actual objects.
BUTTON FUNCTIONS – ROBOT CLEANER
TURBO
• If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation.
• If the button is pressed whilst in ‘Turbo Mode’, it will be canceled.
START/STOP
• Used to turn the power on from Standby, start or stop cleaning.
• If the button is pressed whilst the unit is powered ON, it will start cleaning.
• If button is pressed during the cleaning, it will stop the cleaning.
• If the button is pressed for about 2 sec. whilst the power is ON,
the power will be returned to Standby.
• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.
HOME
BUTTON LOCK
On/Off
Voice Alert
On/Off
• Used to return the Robot Cleaner back to the home station for charging.
• If cleaning is finished or the battery is low, the Robot Cleaner will return
to the Home Station by itself to recharge its battery.
• Pressing the ‘Turbo' and 'START/STOP' button for 3 seconds
will activate or deactivate the Lock function.
• If 'Lock' is ON, a voice announcement "Key has been locked"
will be heard each time a button is pressed.
• Press and hold both the Start and Home button on the main unit for 3 sec.
to turn ON/OFF the Voice Alert.
• If the Voice Alert is OFF, the Mute lamp will be ON.
• You cannot use this feature with the buttons on the remote control.
9
BUTTON FUNCTIONS – REMOTE CONTROLLER
Start
Pressing this button will start
the cleaning. (p16)
Mode
Change the Cleaning Mode of
Roboking to ZigZag Mode.(p18)
Home
Used to recharge the Robot Cleaner by
making it return to the Home Station. (p17)
Turbo
Used to activate or deactivate
'Turbo' mode. (p20)
Directional button
This button enables Manual
Operation and selection of an area
in 'My Space cleaning' mode.
Stop/OK
Pressing the button will stop
the Robot Cleaner.
Repeat
This button allows activating or
deactivating 'Repeat Cleaning'
mode. (p20)
My Space
Used to put the Robot Cleaner in
'My Space clean' mode. (p19)
Mute
Used to activate or deactivate
'Mute' mode. (p11)
Diagnosis
Used to run Smart Diagnosis.
Available only when Robot Cleaner
is recharging. (p23)
Tip
10
• Remote Controller does NOT provide a Power ON function.
• With the machine's power OFF, the Remote Controller will not work.
• To turn the power ON/OFF, use the 'Start/Stop' button on the upper section of the Robot Cleaner.
• The ‘Mode’ and ‘My Space’ button can only be used after stopping
the Robot Cleaner or whilst it is charging on the Home station.
DISPLAY STATUS INFORMATION
Turbo Mode icon
This indicates the settings
for Turbo Mode.
Operational Status icon
This indicates the operational
status of Roboking.
Repeat Mode icon
This indicates the settings
for Repeat Mode.
Homing icon
This indicates the conditions
of Homing and Charging.
Mute icon
This indicates the settings
for Voice Alert.
11
BEFORE YOU START
Check these items before cleaning
• Do not use this device in a room where a child is left alone. The child could be injured.
• Remove fragile or unnecessary objects from the room to be cleaned.
Especially, remove expensive ceramics and valuables from the floor.
• Close the cover of the dust bin compartment before cleaning.
• Remove any moisture that might be on the floor.
• Remove cables, strips, towels, mats etc. from the floor so they will not get tangled in the brushes.
• Confirm whether the battery charge is sufficient, and if it is low, recharge it.
• Empty the dust bin before or after each clean, or before it becomes full.
• Close the doors of any room that you do not want the Robot Cleaner to enter. During cleaning,
the Robot Cleaner may enter another room and continue cleaning.
• When the Mop plate(option) is attached, Robot Cleaner will not be able to go over thresholds of 5 mm or higher.
If you are not planning to use the mop for cleaning, remove the mop before using Robot Cleaner.
• Before starting the device, it's better to remove carpets that are thicker than 20 mm as they may cause it to malfunction.
• Please close any balcony as the wheels may get stuck while cleaning.
– +
+ –
Loading the remote controller battery
1. Open the battery cover by lifting the rear hook of the remote controller.
2. Insert two AAA batteries, checking for +, - nodes while loading.
3. Close the battery cover completely so that the batteries will not fall out.
– +
+ –
Precautions while using the remote control
• Only press one button at a time.
• Do not drop or subject it to any impact.
• Do not store it near devices that give off heat, fire or hot air.
• Certain fluorescent lamps, such as the three band radiation lamp, can interfere with the activation of the remote control.
Therefore, use it as far away as possible from such lamps.
• If the remote control is far from the Robot Cleaner when activated, it may fail to operate properly.
Use the remote within 3 m of the Robot Cleaner if possible.
– +
12
+ –
OVERVIEW
1
2
3
4
5
6
< Warning >
Install the home station. (p14)
Insert the power cord plug into an outlet and locate the station
against a wall. If power is not supplied to the home station, the
Robot Cleaner will not charge.
1.5 
1.5 
2
Turn on the power supply of
the Robot Cleaner. (p15)
Turn ON the power switch on the rear-left of Robot Cleaner,
and press the 'Start/Stop' button on the top.
※ If the power supply is not turned on, refer to page 15.
‫ ﻣﺘﺮ‬1.5
‫ ﻣﺘﺮ‬1.5
‫ ﻣﺘﺮ‬2
Check the dust bin.
Check the cleanness of the dust bin before starting cleaning and
close the dust bin compartment cover on the main unit.
Start cleaning. (p16)
Press the START/STOP button once again while the Robot Cleaner
is turned on. You will hear an announcement of the cleaning mode
and cleaning will begin once the Robot Cleaner has reversed and
turned around.
Automatic charge. (p17)
The Robot Cleaner will self-diagnose and automatically return to
the home station to recharge before the complete discharge of the
battery. It takes approximately three hours to charge the battery.
Use the cleaning mode and
auxiliary functions. (p18~21)
Use the buttons on Robot cleaner and Remote Controller to use
each cleaning mode and supporting features.
For Cleaning Mode, you can choose among ZigZag, My Space,
and Repeat; for secondary features, Manual and Microfibre Mop
(optional).
W
hen the Robot Cleaner is operated with the dust bin compartment lid left open,
it can cause an injury or serious damage to the product.
13
HOW TO INSTALL THE HOME STATION
How to Install the Home Station
1. Position the home station against a wall on hard level flooring
to prevent sliding during docking.
Remove objects within 1.5 m to the right
and left side and within 2 m to the front.
1.5 
1.5 
2
2. Plug the power cord into an outlet.
Wrap the remaining power cord around the fixed hook on the back side of the
home station or along the wall surface so that the travel path of the Robot
Cleaner will not be obstructed.
‫ ﻣﺘﺮ‬1.5
‫ ﻣﺘﺮ‬2
‫ ﻣﺘﺮ‬1.5 Fixing hook of power cord
3. Fix the home station against the wall so that it does not move.
Then turn on the power switch.
4. When the remote controller is not used, store it in the remote controller holder
on the home station.
Tip
< Warning >
14
• Always keep the home station plugged in when in use. If the home station is not plugged in, the Robot
Cleaner will not return to the station to charge automatically.
D
o not operate the Robot Cleaner if the Home Station has a damaged cord or plug, if it is not working
properly, or if it has been damaged or dropped. To avoid electrical hazards, the cord must be replaced
by LG Electronics, Inc. or a qualified service person.
HOW TO TURN THE ROBOT CLEANER POWER SUPPLY ON & OFF
Turning on the main power supply
Make sure the Power Switch is on at the rear-left of the Robot Cleaner.
If the power is OFF, turn the switch ON.
※W
hen turning on the power switch, do not press or touch any button located
on the upper section of the Robot Cleaner. Button operations can be delayed.
※ Turn off the power switch if the Robot Cleaner is not used for a long period of
time in order to protect the battery. The Robotic Cleaner cannot charge if the
main switch is in the "OFF" position.
Turning on from Stand By power.
With the Standby power of the Robot Cleaner OFF, press 'Start/Stop' button for
1 second until a "Ting" sound is heard. In about 10 seconds, the power will be on
and a melody will sound.
※ If 10 minutes elapse without the Robot Cleaner having being given an active
command after being turned on, the power will automatically return to
Standby again.
Turning off the power supply
Press and hold the START/STOP button for two seconds while the
Robot Cleaner is turned on. A melody will sound when the power is turned off.
Tip
• If the power cannot be turned on, do the following.
- Turn the main power switch OFF, wait 5 seconds then ON again.
- Press the ‘START/STOP’ button after the main power switch has been turned on again.
- If the power is not turned on or if there is no display but only the “Ting” sound,
put the Robot Cleaner manually on to the home station as the battery may be flat.
15
HOW TO START AND STOP CLEANING
Using the buttons on the Robot Cleaner
After the Robot Cleaner main power switch is turned on, press the START/STOP
button to begin cleaning. A melody will sound and cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop cleaning.
※ When the ‘START/STOP’ button is pressed while the power supply of the Robot
Cleaner is in Standby, the power will be turned on. Press the ‘START/STOP’ button
one more time to start cleaning.
Using the remote controller
After the Robot Cleaner is turned on from the Robotic Cleaner, press the START
button on the remote control. A melody will sound and cleaning will begin.
Press the STOP button during the cleaning cycle to stop cleaning.
※ The Robot Cleaner cannot be turned on from Standby, by using the remote
controller when the power of the Robot Cleaner is off. When the power is off,
press the ‘START/STOP’ button on the upper side of Robot Cleaner to turn the
power on and to allow the remote to be used.
※ During cleaning, collisions can happen when the sensor cannot detect objects because of their shape (Thin chairs and table legs,
furniture corner). When this happens, the internal impact detecting sensor will react by using a backward motion.
※ If the Robot Cleaner is set to start cleaning at a location away from the home station, put the Robot Cleaner on a flat floor in
order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning from a location where there are no
obstacles. For example, curtains or walls must be 30 cm from the Robot Cleaner.
Tip
For best results:
• Briefly scan the area to be cleaned for big and small objects that will cause difficulty for the Robot Cleaner.
• If cleaning is started when the Robot Cleaner is at the home station, the device can rapidly be returned to the
home station as the current home position has been accurately read.
• When the Mop plate(option) is installed, to prevent a 2nd contamination from the contaminated mop, it will not
go over door sills of 5 mm or higher.
16
HOW TO CHARGE THE BATTERY
Automatic charging
The Robot Cleaner returns to the home station
at the end of a cleaning cycle or when its battery is running low.
※ If 10 minutes elapse without the Robot Cleaner moving or
the battery is too low, the power will be automatically turned OFF.
※ Do NOT turn OFF the Main Power Switch as the battery will not be
recharged. If the machine is returned manually with the Main Power Switch
OFF, it announces an error message, "Main power switch on the back of the
Robot cleaner is turned off. Please turn the switch on."
※ In the event that the unit returns to the Home Station due to a low battery
during the cleaning, cleaning will be started, after recharging, from the nearest
place of the area which has not been cleaned before.
※ If Robot Cleaner is unable to dock to the home station on its first attempt, it will try again until it docks successfully.
※ When Robot Cleaner has completed all areas that it can clean,
it will return to the home station even when the battery level is not low.
Manual charging
You can manually charge the battery prior to using the Robot Cleaner for the first time or to charge the battery during cleaning.
Method 1. Attach the Robot Cleaner to the home station by
aligning to the front side of the home station. A melody
sound will be generated along with an audio message to
start charging.
※ If a voice message, "Main power switch on the back of
the Robot cleaner is turned off. Please turn the switch
on." is announced repeatedly, then turn on the Main
Power Switch.
Method 2. When the 'HOME' button of the remote control or the
Robot Cleaner is pressed, charging will be prompted
by automatically generating a searching signal and
returning the Robot Cleaner to the home station.
※ If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually charged by pressing the
Home button, it may take slightly longer to find the home station.
※ If the Robot Cleaner is within 10 cm of the front of the charging terminal while the power is turned on from Standby,
it will automatically be returned to the home station and charging will begin.
Tip
Take the following precautions when using the home station:
• If foreign material is caught on the charging terminal, charging may not be activated. Wipe the terminal from time
to time with a dry cloth after the power plug is disconnected.(p28)
• To prevent electric shock or damage to the home station,
do not touch the charging terminal with any metallic objects.
• To avoid fire or electric shock, never disassemble or modify the home station.
• Do not to place the Robot cleaner, the home station or power plug near a heating source.
17
CLEANING MODES
Zigzag Cleaning
In 'Zigzag Clean' mode, Robot Cleaner repeats a zigzag
operation to clean each and every spot in the cleaning area.
If you need to quickly clean an area choose 'Zigzag Clean' mode.
Press ‘Mode’ button on Remote Controller to select 'Zigzag
Clean' mode and press 'Start' button.
※ Factory release default setting is 'Zigzag Clean.'
Manual cleaning
By pressing a direction key on the Remote Controller, you can move Robot Cleaner in a Manual mode.
Robot Cleaner will clean the area, moving forward/backward/left/right, according to the input of the direction key.
While in 'Manual' mode, the robot cleaner will run into obstacles placed behind it
if the backward key on the remote remains held down.
18
CLEANING MODES
My Space Cleaning
Pressing 'My Space' on the Remote Controller will set the My Space cleaning mode with a voice
message. For cleaning of particular spaces, select this mode.
The 1st stage:
Use the Remote Controller to manually set the parrameters of each cleaning block.
※ This cleaning mode will be accepted when the distance of
the start and end position is less than 1 m.
My Space
The 2nd stage:
Pressing the 'Start' button will then make the Robot Cleaner clean the manually outlined area by itself.
※ Upon failure to correctly outline a zone, a voice will announce, which says "Area does not meet the specified conditions.
Please continue to make specified area for cleaning process."
Use the Remote Controller to assign a zone, again.
※ When My Space cleaning is completed, the mode is switched to Auto Clean (ZigZag).
Tip
• While recharging, you cannot activate 'My Space clean' mode.
• To change the cleaning mode while the Robot Cleaner is in operation,
press 'Stop' button first then select a cleaning mode. The cleaning will then start from the begining.
19
AUXILIARY CLEANING MODES
Turbo Mode
Pressing the 'Turbo' button on the Remote Controller or main
unit will activate 'Turbo' mode, with a voice message.
While in 'Turbo' mode, pressing the same button will cancel
'Turbo' mode, with a voice message.
In 'Turbo' mode, Robot Cleaner runs more intensely for a
powerful clean. Mode mode will reduce the battery duration.
Repeat Mode
Pressing 'Repeat' button on Remote Controller will activate 'Repeat' mode, with a voice
message. While in 'Repeat' mode, pressing the same button will cancel 'Repeat' mode, with
a voice message. In 'Repeat' mode, Robot Cleaner repeats the cleaning in progress until the
battery runs out without returning to the home station.
Learning Mode
The Robot Cleaner is capable of memorising the cleaning
environment through its Learning mode for an intelligent
cleaning operation.
※ 'Learning Mode' is available only when the machine starts
cleaning from the Home Station.
Tip
20
• Precautions with Smart Operation
- This Learning mode enables memorizing locations with obstacles to help bypass them. Robot Cleaner
memorizes every aspect of the environment it was subjected to from when it started cleaning
from the Home Station to the moment it finishes its course.
- Robot Cleaner learns new conditions again when the location of Home Station has been changed.
- If the learning mode is accepted, a voice message will say "The learning cleaning process is complete."
MOP CLEANING (OPTION)
By attaching the ultra microfiber mop, you can effectively use
the Robot Cleaner to remove dust on hard floor surfaces.
When the mop plate is attached, the Robot Cleaner will not
climb on to carpets or over thresholds, in order to prevent
transferring dirt from the mop.
Caution
Do not cover the bottom
camera sensor by mop.
For mop cleaning, mount the mop and mop plate to the Robot Cleaner according to the following instructions:
1. Attach the ultra microfiber mop to the Velcro of the
mop plate as shown in the figure.
2. Firmly slide the Mop Plate into the furrows
until you hear a 'click' sound.
※ Note that, if the Mop Plate is not secured correctly, it
may separate during the cleaning.
“Click!”
Fixing hook
Fixing groove
3. It is essential that the fixing hooks on the Mop Plate
align correctly on to the fixing grooves on the underside
of the cleaner.
Tip
• To avoid odors, wash any foreign material or dust off the mop after cleaning is completed.
• To avoid staining floors, do not use the ultra microfiber mop to clean
when dirt is contaminated with liquids such as coffee or ink.
• To avoid damage to carpets from the Velcro or dirt transfer from the mop,
do not attempt to clean the carpet while the mop plate or mop is attached.
• Keep the ultra microfiber mop dry. Do not use it on wet surfaces.
If there is moisture on the floor, it can interfere with the navigation and damage the unit.
• Smart Diagnosis feature is not available, when the Mop Plate is attached.
• Some models may not come with Microfibre Mop or Mop Plate.
21
LOCATION SEARCH FUNCTION
The Robot Cleaner remembers its location while cleaning.
If the user moves the Robot Cleaner while it is operating, it will search for the location
it was moved from by using its navigational location search function before continuing to clean.
※ The navigating function will be activated after the Robot Cleaner
adequately recognizes the cleaning environment.
Change location
Manual Relocation.
1. With the power off, locate the Robot Cleaner near the
location where it was originally moved from.
※ The location search is more effective when the Robot
Cleaner is closer to the location where it was moved from.
※ If it is moved from its original cleaning position by more
than 1 m, it becomes difficult for the Robot Cleaner to
search for it's previous location.
1m
1m
Location of incident
2. Press the START/STOP button on the Robot Cleaner or START button on the remote controller.
Robot Cleaner will then start the location search function along with an audio guide.
※ When the location search is successfully completed, it will continue cleaning from where it was moved.
If the location search fails, it will start again from the beginning.
To improve its accuracy, do not
stand near the Roboking
when it is in location search mode.
Location of incident
Tip
22
• If the power is turned off after the location search function is set, the location search function will be canceled.
• Location search will be more effective when the Robot Cleaner is closer to the location where it was moved from.
SMART DIAGNOSIS
Robot Cleaner uses this Smart Diagnosis feature to run a self-diagnosis.
If any irregularity is found from the diagnosis, please contact the local LG Electronics service center.
※ During Smart Diagnosis, the Robot Cleaner will move about within a 50 cm radius. So, make sure no objects are in the
way within a 1 m radius around the Home Station, before starting Smart Diagnosis.
1. Smart Diagnosis will operate when the main power switch of the Robot
cleaner and the Home station are turned on, and the unit docked on
the Home station.
※ Smart Diagnosis is only possible when the Robot Cleaner
is attached to the Home Station.
2. Press 'Diagnosis' button on the Remote Controller, then the process
will start with a voice message which says "Starting Robot cleaner
smart diagnosis. Please step away and remove any items
within 1 meter, or about 3 feet."
※ If the Mop Plate(option) is attached,
the process will not be activated.
3. When the Smart Diagnosis has successfully finished, Robot
Cleaner will return back to the Home Station and inform the
result through a voice message. After the voice message,
pressing the 'HOME' button on the Remote Controller or
main unit will allow the voice message to be repeated. To
terminate the diagnosing process, press the 'Stop' button on
the Remote Controller or main unit.
※ After the Smart Diagnosis voice message, the Robot
Cleaner will start recharging after 1minute.
※ If an error is detected with any of the Sensors whilst
in Smart Diagnosis, a voice message will announce,
and the unit will not return to the home station.
Tip
• Be careful not to touch the Robot Cleaner or disturb its operation before Smart Diagnosis is complete.
If it is accidently interrupted, turn the main power switch OFF then ON again to resume the diagnosis.
• Smart Diagnosis will not be activated in each of the following cases.
In each case, check the problem and try again.
- Robot Cleaner is detached from Home Station
- Battery level is insufficient
- No Dust Bin Filter is fitted.
- Mop Plate(option) is attached
23
SMART DIAGNOSIS
If a voice message is announced after Smart Diagnosis, refer to the following table to take proper actions.
Voice message
Starting Robot cleaner smart diagnosis. Please step away and
remove any items within 1 meter, or about 3 feet.
Robot cleaner needs to be charging in order to activate smart
diagnosis. Please dock the Robot cleaner to the home station.
Starting Robot cleaner smart diagnosis. Reservation has been
cancelled for smart diagnosis. Please step away and remove any
items within 1 meter, or about 3 feet.
No defect found during diagnosis.
Unable to initiate smart diagnosis due to a low battery. Please try
again after battery is charged.
Please check that the dust bin and filter are properly installed.
Robot cleaner will not charge due to infrared sensor error. Please
try smart diagnosis again after turning the main power switch on
the back of the Robot cleaner 'Off' then 'On' again. If the problem
continues, please contact LG Electronics customer care.
Robot cleaner will not charge due to ultrasonic sensor error.
Measures (for reference)
Clear any object within a 1 m radius around Home Station,
and stay back until the diagnosis is complete.
Move Robot cleaner to the Home Station to recharge it.
Try the Smart Diagnosis again after recharging the battery.
Open the Dust Bin Cover and examine the bin.
Run Smart Diagnosis again and, if the same message is
announced, contact an LG Electronics service center.
Run Smart Diagnosis again and, if the same message is
announced, contact an LG Electronics service center.
Robot cleaner will not charge due to a problem with the cliff
Clean the three Cliff Sensors on the bottom
sensors on bottom. Please wipe the sensors clean.
at the front of the unit.
Please clean the camera sensor on bottom right side.
Clean the lens of Camera Sensor on the bottom-right
Please clean the obstacle detecting sensor windows on the left
Clean the lens of the Obstacle Sensors
and right side of the Robot cleaner.
on both the left and right hand sides.
Run Smart Diagnosis again and, if the same message is
A problem has been found on the Gyro Sensor. Please try smart
diagnosis again after turning the main power switch on the back of announced, contact an LG Electronics service center.
the Robot cleaner 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
Please check for foreign material on the left wheel.
Check for foreign materials on the left wheel.
Please check for foreign material on the right wheel.
Check for foreign materials on the right wheel.
Run Smart Diagnosis again and, if the same message is
A problem has been found on the left wheel sensor. Please try
smart diagnosis again after turning the main power switch on the announced, contact an LG Electronics service center.
back of the Robot cleaner 'Off' then 'On' again. If the problem
continues, please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is
A problem has been found on the right wheel sensor. Please try
smart diagnosis again after turning the main power switch on the announced, contact an LG Electronics service center.
back of the Robot cleaner 'Off' then 'On' again. If the problem
continues, please contact LG Electronics customer care.
A problem has been found with the brush. Please check for any foreign material. Check for any foreign material stuck in the Brush.
Run Smart Diagnosis again and, if the same message is
A problem has been found in the suction motor. Please try smart
diagnosis again after turning the main power switch on the back of announced, contact an LG Electronics service center.
the Robot cleaner 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is
A problem has been found in the acceleration sensor. Please try
smart diagnosis again after turning the main power switch on the announced, contact an LG Electronics service center.
back of the Robot cleaner 'Off' then 'On' again. If the problem
continues, please contact LG Electronics customer care.
In order to listen to the smart diagnosis result again, please press If you need to repeat the diagnosis result, press the 'Home'
the charging button. To stop, please press the stop button.
button, or press 'Stop' button to finish the diagnosis.
Smart diagnosis mode will be turned off.
Smart Diagnosis mode will not operate with the mop plate
Run Smart Diagnosis again after removing the Mop Plate.
attached. Please try again after removing it.
Turn the main power switch OFF and then ON again to resume
Smart diagnosis has failed to complete its diagnostics. Please
the diagnosis. Do NOT touch the robot or disturb its operation
try again after turning the main power switch on the back of the
until the diagnosis is complete.
Robot cleaner 'Off' then 'On' again.
Please check if the charging terminal is damaged or dirty.
Clean the charging terminals on the Robot cleaner
and the Home Station.
24
CLEANING THE DUST BIN
If the dust bin is full, suction power can be reduced. Clean the dust bin before or after each cleaning session.
Clean the dust bin using the following sequence:
1. Open the dust bin compartment cover by pressing
the PUSH button on the Robot Cleaner.
2. Grab the handle of the dust bin and pull it upward.
3. Pull the hook on the left of Filter Cover on the rear of
Dust Bin to separate the filter and the sponge.
※ Note that separating the filter may result in dust dropping.
※ Refer to p.26 when cleaning the Dust Bin Filter.
4. Lift the dust bin lid upward while pressing the separation
button on the dust bin.
5. Empty the dust bin and clean it with a cleaning brush
or under running water.
6. After cleaning with water, completely dry the dust bin in a
well-ventilated area out of the direct sunlight.
7. When reassembling or fitting the cleaned Dust Bin,
close the lid and put in the Sponge and HEPA Filter.
※ Refer to p.26 for detailed assembly guides.
8. Put the dust bin into the Robot Cleaner and close the dust
bin compartment cover.
Tip
• Operating the unit without Filters fitted to the dust bin can cause a motor malfunction not covered by warranty.
• After cleaning the Dust Bin, make sure to assemble the filter and fit it to the Dust Bin.
If you initiate cleaning, with no filters fitted to the dust bin or Filter Cover not assembled,
a voice message will be announced which says "Please check that the dust bin and filter are properly installed."
• Always ensure that the dust bin lid is refitted correctly after cleaning the dust bin so that it closes easily and
accurately.
25
CLEANING THE DUST BIN FILTER
The Dust Bin Filter consists of a HEPA Filter and Sponge Filter.
Clean both the HEPA and Sponge filters as per the following sequence.
1. Pull the hook on the left of the HEPA Filter module on the
rear side of Dust Bin to separate the HEPA Filter and the
sponge.
2. Thoroughly clean out the fine dust particles on the HEPA Filter,
with a vacuum cleaner or cleaning brush.
※ Do NOT wash the HEPA Filter with water.
Its suction power will be reduced.
3. Use a cleaning brush to clean the Sponge Filter.
If using water to clean it, allow it to dry completely
in the shade before refitting.
4. Assemble the HEPA and Sponge filters back onto
the Filter housing as per the following sequence.
※ Fit the rectangular locator on the HEPA Filter into the
locating slot of the filter body.
※ Be careful not to incorrectly assemble HEPA and Sponge
Filter onto the Filter housing.
Tip
26
• To preserve the performance of the Robot Cleaner, clean the HEPA Filter at least once a week,
with a brush or vacuum cleaner.
• The HEPA and sponge filters must be fitted to the filter housing before refitting the filter to the dust bin.
Operating the Robot cleaner without the HEPA and sponge filters will cause the suction motor to malfunction.
CLEANING THE BRUSH
The rotating Brush, located on the bottom of Robot Cleaner, helps collect the dust. Clean the Brush as per the following sequence.
※ Before turning over the main unit, lay a soft cloth on the floor and remove the Dust Bin.
Otherwise, the main unit can get scratched and dust will fall from Dust Bin.
Turn the Main Power Switch OFF
before starting the clean.
Put the Robot Cleaner upside down
on a soft cloth.
After checking for foreign materials,
press down the Fixing Hook and pull it
up to separate the brush Cover.
By using the cleaning tool, clear
hairs and other debris and foreign
materials on the Brush and from the
2 smaller jockey wheels.
Push the Brush all the way into
the yellow protrusion.
While pushing the Brush, lift the
white protrusion part up to separate
it from the main unit.
Carefully clean the Brush with a
vacuum cleaner or scissors.
Fit the Fixing Hook (rectangular
shape) on the side of the Brush into
the slots, with the colors matching.
While pushing the Brush to the
arrow direction, fit the Fixing Hook
(rectangular shape) on the opposite
side into the slot.
Press down and close the Cover until
a 'crack' sound is heard from both
sides of Fixing Hook.
※B
e careful not to trap the side
brush bristles under the cover
when closing it.
27
CLEANING THE SENSORS/CHARGING TERMINALS
There are sensors on the Robot Cleaner that detect obstacles, stairways and the
home station for charging the battery. In order to maintain the performance of the
Robot Cleaner, regularly clean the sensors and charging terminals as follows:
1. Turn off the power switch on the rear side of the Robot Cleaner. Injury can be
caused by the activation of the Robot Cleaner if the main power is not turned off.
2. Lay a smooth cloth on the floor, turn over the Robot Cleaner and put it on the cloth.
※ Please make sure to remove the dust bin before rotating the main body.
Otherwise, the dust in the dust bin may fall out.
3. Use a smooth cloth or cleaning brush to wipe the dust off each of the 3 cliff
sensors, camera sensors and ultrasonic sensors and the charging terminal as described below.
Ultrasonic sensors
Upper camera sensor
Obstacle detecting
sensor window Detecting
sensors of home station
& Receiving sensors of
remote controller
Cliff detection
sensors
Charging terminals
Lower camera
sensor(option)
Charging terminals
Lens
Tip
28
• Do not clean the Robot Cleaner by directly spraying it with water, thinners, solvents, benzene, or any other liquids.
• Call the service center if the sensor or charging terminal is damaged.
Sensor and terminal damage can cause the product to malfunction.
• To clean the sensor/charging terminals, use the cleaning brush.
• Some models may not have a Camera Sensor, on the bottom.
CLEANING THE SIDE BRUSH
Foreign objects/materials such as hair can easily adhere to the side brush.
Remove such materials at least once a week.
If excessive amounts of foreign materials are stuck to the brush,
there is the risk of damage to the brushes.
If the floor is rough or frequently cleaned, the side brushes may bend or become damaged.
In this case, use the following method to straighten the side brush.
1. The following procedure is helpful in restoring deformed
brushes.
2. Turn off the power by switching the main switch off on the
rear off the unit.
3. Place the Robot Cleaner at the end of a table to make
cleaning the side brush easier. Make sure that the Robot
Cleaner is not in danger of falling.
4. Soak the side brush in warm to hot water.
5. Press down on the side brush for about ten seconds so that
it is completely submerged in the water.
6. Slowly wipe the side brush by sliding it through your hand.
7. Rotate the side brush and repeat steps 4-6 for each section
of the brush.
8. Use the side brush only after it has completely dried.
Side Brush management
1. Remove the screws by using a suitable screw driver and
separate the Side Brush from the main unit.
2. Remove any hair after the separation.
3. Assemble the Side Brush by replacing it onto the bottom of
the Robot Cleaner, with the 'R' and 'L' marking of the Brush
matching the counterparts on Robot Cleaner.
29
CLEANING THE ULTRA MICROFIBER MOP (OPTION)
To avoid odors, dirt and dust should be washed off the mop after it is used for cleaning.
Follow these directions to wash the ultra microfiber mop:
1. Separate the ultra microfiber mop from the mop plate.
210 mm
2. Carefully clean it with warm water.
3. Use the Mop after completely drying it in direct sunlight.
※ If the Mop is used in a damp or wet state,
it will cause the Robot Cleaner to malfunction.
Tip
30
• To avoid product malfunction, only use the ultra microfiber mop provided with the Robot Cleaner.
• Additional microfiber mops can be purchased by visiting a nearby LG Electronics service center.
• Some models may not come with Microfibre Mop or Mop Plate.
TROUBLESHOOTING
Upon a voice message,
"The wheels are not touching the floor. Please move Robot cleaner onto flat floor."
A warning message will be given if a wheel does not contact the floor surface for any reason.
• Is a wheel trapped in the front door, balcony, stairway, etc?
s Move the Robot Cleaner on to the flat floor.
Upon a voice message, "Please remove any foreign material on the left/right wheel."
• Is any foreign material wound around the wheel?
s Turn off the main power switch on the rear side of the Robot cleaner.
Then lay a soft cloth on the floor, turn over the Robot Cleaner, and put it on the cloth.
Remove foreign material after observing the wheel.
※ Please make sure to remove the dust bin before turning over the main body.
Otherwise, the dust in the dust bin may fall out.
Upon a voice message,
"Robot cleaner cannot continue cleaning. Please check the area around it."
A warning message will be given if Robot Cleaner cannot go on cleaning due to any unfavourable condition.
• Is the Robot Cleaner stuck?
s After removing it from the obstacle, place the Robot Cleaner on flat floor.
31
TROUBLESHOOTING
Upon a voice message, "Please check that the dust bin and filter are properly installed."
A warning message will be given if there is no Dust Bin or Filter housing fitted.
• Is the Dust Bin fitted to the Robot Cleaner?
s Open the Dust Bin compartment cover and check to ensure the Dust Bin is in place.
s Do NOT leave the Dust Bin Cover open.
• Make sure the Filter housing is assembled onto the Dust Bin.
Upon a voice message,
"Battery is low. Please move Robot cleaner onto the home station to charge."
When the remaining amount of battery power is almost nil, the voice, “Battery is low”, is generated.
• Initiate battery charging of the Robot Cleaner by moving it to the home station.
s When the Robot Cleaner is attached to the docking station successfully,
it will start the recharging with the recharging start melody.
32
TROUBLESHOOTING
Upon a voice message,
"Please remove any foreign material from the brush on the bottom."
A warning message will be given if foreign materials restrict the Brush's rotation.
Turn off the main power switch on the rear of the Robot Cleaner.
Lay a soft cloth on the floor and put the Robot Cleaner upside down on it.
※ Before turning over the main unit, remove the Dust Bin. Otherwise, it will cause dust to fall from Dust Bin.
• The brush is making a loud, abnormal sound.
s Confirm the correct assembly of the brush by checking the separation groove of the brush
s Remove the lower rotating brush from the Robot Cleaner and remove any foreign material from the brush.
1
2
3
5
4
• The lower rotating brush or side brush is stuck.
s Remove any foreign materials such as cables, thread of hair caught in the side brush or the lower rotating brush.
※ For a more detailed description of this process, refer to the instructions on page 27, 29.
33
BEFORE YOU CALL FOR SERVICE
Confirm before reporting the failure of Robot Cleaner.
Problem
34
Solutions (Reference page)
The power supply cannot
be turned on.
Check that the power switch is turned on. (Page 15)
The power supply automatically
turns off.
This is not a failure. Robot Cleaner has its own power saving function.
If it is not used for ten minutes after the power supply is turned on,
the power will automatically turn off. (Page 17)
The Robot Cleaner will not charge.
ƬƬ Check whether the main power switch is turned on.
ƬƬ Remove objects around the home station. (Page 15)
ƬƬ Confirm that the power supply is connected to the home station. (Page 14)
ƬƬ Wipe the charging terminals with a dry cloth.
Suction power becomes weak.
ƬƬ Check whether there is foreign material blocking the suction port. (Page 27)
ƬƬ Empty the dust bin. (Page 25)
ƬƬ Clean the dust bin filter. (Page 26)
Noise becomes louder.
ƬƬ Confirm that the dust bin has been mounted properly.
ƬƬ Confirm that the dust bin filter has been mounted properly. (Page 26)
ƬƬ Check whether foreign material is caught in the brush. (Page 27)
The Robot Cleaner will not activate.
ƬƬ Confirm that the power switch is turned on. (Page 15)
ƬƬ Confirm that the battery has been charged. (Page 17)
The lower brush does not rotate.
ƬƬ Clean the brush. (Page 27)
ƬƬ Confirm that the brush has been mounted properly. (Page 27)
Movements or travel path
are abnormal.
ƬƬ Carefully wipe the sensors with a dry soft cloth. (Page 28)
ƬƬ If the ultra microfiber mop is attached,
confirm that it is mounted properly. (Page 21)
ƬƬ Turn the main power switch off and on.
The Robot Cleaner cannot be
activated with the remote control.
ƬƬ Replace the remote control batteries. (Page 12)
ƬƬ Confirm that the control is within the coverage area of the main unit,
which is less than 3 m. (Page 12)
ƬƬ Check whether the main power switch is turned on. (Page 15)
PRODUCT SPECIFICATIONS
Item/Model
LG Robot Cleaner
VR634*, VR635* ser.
External Dimensions
340 mm × 340 mm × 89 mm
Weight
3 kg
Power Consumption
18 W
Battery (Fully Charging)
DC 16.8 V
Traveling Velocity
350 mm/s (Maximum)
Use Time
Approx. 100 minutes
(Based on general wooden floor)
Charging Time
3 hours
Main Functions
Turbo Mode
Learning Mode
Obstacle Sensing
Anti-Plunge function
Error Displaying
Navigation
Auto/Manual Recharging
Dry Mopping (cleaning)(option)
Corner Clean
Voice Messaging
Map Drawing
Repeat Cleaning
My Space Cleaning
Zigzag Cleaning
Item/Model
Home Station
External Dimensions
236 mm × 181 mm × 128 mm
Rating
240 V~ 50 Hz
Output Voltage/Current
DC 17.1 V / 1.1 A
Power Consumption
23 W
Item/Model
Battery
Type
Lithium Battery
35
REFERENCE ITEMS
Open source software notice
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Dis/Assembling the battery
1
2
Turn off the main power switch on the
back-left side of the Robot Cleaner.
6
Place a soft cloth on the floor,
remove the dust bin, and flip the
Robot Cleaner over.
3
Remove the screws by using a Phillips
head screwdriver.
5
Assemble the battery in the reverse
order.
Separate the wire from the battery
while pressing the connector hook.
4
Remove the battery from the device.
WARNING
Please be careful of fire, explosion, electric shock, or breakdown.
• Do not charge this Battery Pack(Pack hereafter) with any other type of charger other than
the one originally provided with the Robot Cleaner.
• Do not damage the Pack in such ways as drop, crush, puncture, cut or short extemal contacts.
• Do not attempt to disassembly the pack In any case. When the Pack is damaged or malfunctioning,
bring it and the Robot cleaner and Home station to an authorised service center.
• Do not place this pack near a heat source or do not dispose of in fire or water.
• Please keep the Pack away from any damp or wet environment when the pack is charged.
• Please keep away from children, infant or pets.
36
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled bin symbol is attached to batteries/accumulators of Your product it means they are covered by
European Directive 2006/66/CE.
2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains more that
0.0005% of mercury, 0.002% of cadmium or 0.004% of lead.
3. All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed
by the government or the local authorities.
4. The correct disposal of Your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal
and human health.
5. For more detailed information about disposal of Your old batteries/accumulators, please contact Your city office, waste disposal service
or the shop where You purchased the product.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/
EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via
designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop
where you purchased the product.
37
Made in Korea
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising