LG L226WA-SN User's Guide

Add to My manuals
29 Pages

advertisement

LG L226WA-SN User's Guide | Manualzz
User’s Guide
L226WA
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
Do not Open the Display.
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
A1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
A2
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Body into the product in the correct direction as shown in the
picture. Make sure you push it until you hear it “click”.
Important: Once the stand body and the hinge body are assembled, you cannot
disassemble them.
Stand Body
Hinge Body
3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
4. Once assembled take the monitor up carefully and face the front side
Stand Body
Stand Base
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
A3
Connecting the Display
To remove the Stand:
1. Put a cushion or soft cloth on a flat surface. 2.
Place the monitor face down on
the cushion or soft cloth.
The Head part
The Stand
base part
3. Pushing Latch inside, Take the stand base from stand body.
4. Separate the stand using a screwdriver as shown in the picture.
Note: Please keep the 4 screw in an accessible place for future use.
5.
Pack up the product as shown in the picture.
A4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚
Swivel :355˚
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
A5
Name and function of the Parts
PB
6
PR
COMPONENT
Y
Rear View
AUDIO
OUT
AC-IN
1
2
HDMI
DVI-D
D-SUB
3
4
5
7
1 Kensington Security Slot
2 AC-IN Connector : Connect the Power Cord
3 HDMI Signal Connector
4 DVI-D input terminal (digital signal connector)
5 D-SUB Analogue Signal Connector
6 COMPONENT Input Terminal
7 Audio out Jack(Headset/Earphone/connecting terminal of the Speaker)
: You can use the AUDIO-OUT Jack by connecting earphones or a headset
when using the HDMI configuration.
*AUDIO-OUT is only available with the HDMI input.
(You cannot use it with D-SUB, DVI or any other component.)
PR
The Left Rear of the Monitor
AUDIO
OUT
A6
Connecting to External Devices
When Connecting to your PC
1. Place the monitor in a convenient, well-ventilated location near your computer.
To adjust height of your monitor, unlock the stand lock on top of the stand.
2. Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection. 1
3. Connect the power cord into a proper power outlet that is easily accessible and close
to the display. 2
PB
PR
COMPONENT
Y
NOTE
Varies according to model.
AUDIO
OUT
HDMI
AC-IN
DVI-D
D-SUB
2 Power
Cord
1 Signal Cable
This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
Wall-outlet type
PC
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA connector on the supplied cable to a
15 pin 2 row connector.
4. Press button on the front switch panel to turn the power on.
5. Press the SOURCE button at the front side of the monitor.
SOURCE
A
B
Note
-+
AUTO/SET
When connecting with a DVI signal input cable.
• Select DVI : DVI digital signal.
When connecting with a D-Sub signal cable.
• Select RGB : D-Sub analogue signal.
INPUT
RGB
DVI
HDMI
Component
*RGB: To connect 15-pin D-SUB
signal input cable
*DVI: To connect DVI signal
input cable
How to connect to two computers.
Connect the signal cables (DVI and D-Sub) to each computer.
Press the SOURCE button at the front side of the monitor.
Directly connect to a grounded power outlet on the wall or
a power bar with a ground wire.
A7
MAC
Connecting to External Devices
When Watching DVD/Video/HDTV
When connecting with a Component cable
1. Connect the Component cables and RCA to Stereo cables properly.
Connect the terminals to the sockets of the same color.
PB
PR
COMPONENT
Y
2. Connect the power cord.
AUDIO
OUT
AC-IN
HDMI
DVI-D
D-SUB
Speaker
(not included)
AUDIO
IN
Monitor
RCA-Stereo cable
(not included)
Component Cable
(not included)
DVD/VIDEO/HDTV
DVD/VIDEO/HDTV
3. Press the SOURCE button at the front side of the monitor.
SOURCE
A
-+
INPUT
AUTO/SET
RGB
DVI
HDMI
Component
When connecting with a Component cable.
• Select Component
A8
Connecting to External Devices
When Watching DVD/Video/HDTV
When connecting with a HDMI cable
PB
PR
COMPONEN
1. Connect the HDMI cables and Audio cables properly.
AUDIO
OUT
DC-OUT
HDMI
DVI-D
D-SUB
Audio cable
(not included)
HDMI cable
(not included)
DVD/VIDEO/HDTV
2. Press the SOURCE button at the front side of the monitor.
SOURCE
A
-+
AUTO/SET
INPUT
RGB
DVI
HDMI
Component
When connecting with a HDMI cable.
• Select HDMI
A9
Connecting to External Devices
To arrange the cables
PB
COMPONENT
Y
After connecting the cables neatly, arrange the cables to the Cable
Holder as shown in the following figure.
AUDIO
OUT
HDMI
AC-IN
DVI-D
AUDIO
OUT
PR
1.
D-SUB
Cable Holder
A10
Control Panel Functions
Front Panel Controls
Button At the current display, Use 'ez Zooming' Key,
then the display resolution is transferred to the
one step low resolution.
Use 'ez Zooming' Key one more, the display is
back to the original display.
*Only One touch of ez-zoom, you can fine the
best resolution you want and it is possible to
magnify the size of characters and pictures for
the old not having good eye sight, housewives
not dealing with computer well and children.
Recommend resolution are 1680 x 1050, 1280 x 1024, 1024 x 768, 800 x 600.
The setting method can differ by O/S or video card. In this case, Please ask to
the computer or the video card manufacturer.
Notice
Forte Manager does not work in HDMI Video mode.
A11
Control Panel Functions
Use this button to enter or exit the On Screen Display.
MENU Button
Controls locked/Controls unlocked
This function allows you to lock the current control settings,
so that they cannot b inadvertently changed.
Use this function to lock or unlock OSD display settings. To
lock the setting, go to the special function in the OSD menu
and select “On” for Child lock. The message, “Controls
locked” will be displayed. To unlock the setting, Press and
hold MENU and (+) buttons for a while until you see the
message, “Controls unlocked”
Controls locked
Controls unlocked
Use this button to select an icon or adjust the
setting in the OSD screen.
- + Button
(+)SOURCE Button
• Select the input signal.
-+
SOURCE
RGB
DVI
Component
HDMI
AUTO/SET
RGB
DVI
HDMI
Component
: 15-pin D-SUB analogue signal
: DVI digital signal
: DTV SET-TOP BOX,Video,DVD
: HDMI
DTV SET-TOP BOX,Video,DVD
AUTO/ SET
Button
For optimal display
change resolution to 1680x1050
INPUT
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
- 22 inch monitor : 1680 x 1050@60Hz
Power Button
Use this button to turn the display on or off.
Power Indicator
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to amber.
A12
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Move where
you want to
adjust
Pops up
the menu
screen
Select a
menu icon
Move where
you want to
adjust
Select a
menu icon
Adjust the status
Save
adjustment
1
Press the MENU Button, then the main menu of the OSD appears.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the AUTO/SET Button.
4
Use the
5
Accept the changes by pressing the AUTO/SET Button.
6
Exit the OSD by pressing the MENU Button.
-+
-+
Buttons.
Buttons to adjust the item to the desired level.
A13
Exit from
the menu
screen.
On Screen Display(OSD) Selection and Adjustment
OSD (On Screen Display) menu
Icon
Function Description
Adjusting Screen Colour.
PICTURE
Selecting the options.
SPECIAL
Screen Adjustment.
SCREEN
Adjusting PIP Mode (Multiple Screen) Functions.
PIP/DW
PIP
Note
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently
since it provides graphical presentation.
A14
On Screen Display(OSD) Selection and Adjustment
Adjusting Screen Colour
EZ Video
HDMI, Component input
The EZ Video function automatically adjusts the screen image quality
depending on the AV usage environment.
• Dynamic : Select this option to display with a sharp image.
• Standard : The most general and natural screen display status.
• Mild : Select this option to display with a mild image.
• Game : Select this option to enjoy dynamic image when playing a game.
• User : Select this option to use the user-defined settings.
Brightness
To adjust the brightness of the screen.
Contrast
To adjust the contrast of the screen.
Color
To adjust the color to desired level.
Sharpness
To adjust the clearness of the screen.
ACC
HDMI, Component input
Selecting a factory setting colour set.
• Warm : Slightly reddish white.
• Normal : Slightly bluish white.
• Cool : Slightly purplish white.
Note
If the EZ video setting in the Picture menu is set to Dynamic,
Standard, Mild or Game the subsequent menus will be automatically
set.
A15
On Screen Display(OSD) Selection and Adjustment
Adjusting Screen Colour
PC only
• 6500K/9300K/sRGB
Selecting a factory setting colour set.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
sRGB : Set the screen color to fit the
SRGB standard color
• User : Select this option to use
the user-defined settings.
CSM
EZ Video
CSM
User
Brightness
To adjust the brightness of the screen.
Contrast
To adjust the contrast of the screen.
Red / Green / Blue
Set your own colour levels.
EZ Video
BrightnessCC
Note
C
50
ContrastCCC
50
RedCCCC
50
GreenCCCC
50
BlueCCCC
50
User
* When HDMI is connected to a set-top box or video player like a
DVD player, please select HDMI PC in the screen adjustment of
the OSD to start CSM for 720P @ 60 Hz, 480P @ 60 Hz .
* 720P @ 60 Hz, 480P @ 60 Hz is equivalent to PC Timing
1280x720 @ 60 Hz, 640x480 @ 60 Hz.
A16
On Screen Display(OSD) Selection and Adjustment
Selecting the options
Input
Child Lock
Language
Power Indicator
Transparency
Reset
DDC-CI
Input
If you press the button once, the
following Input Signal Window will
appear. Select the signal type
you want using the - + button.
Input
Child Lock
Language
Power Indicator
Transparency
Reset
DDC-CI
Child lock
This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Child lock tab to the 'On'
position. In order to unlock it, do the following :
*Press and hold the MENU and (+) Button for several seconds. The message
"Controls locked" should appear.
Language
To choose the language in which the control names are displayed.
Power
Indicator
Use this function to set the power indicator on the front side of the product to
On or Off.
Transparency
To adjust the transparency of the OSD menu screen.
Reset
Use this function to reset the product to the factory default. However, language
selection will not be initialized.
DDC-CI
DDC/CI(Display Data Channel Command Interface) is communication protocol for
communications between PC and monitor.
DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the
monitor OSD.
Monitor can be adjusted with PC by connecting communication between PC and monitor
when DDC/CI is ON, and monitor cannot be adjusted with PC because communication
between PC and monitor is disconnected when DDC/CI is OFF.
A17
On Screen Display(OSD) Selection and Adjustment
Screen Adjustment
SCREEN
ARC
Auto-configure
Clock
Phase
Position
HDMI
ARC
To select the image size of the screen.
* Menu varies depending on the type of input signal.
ARC is activated in Video signal but deactivated in 1080i.
<HDMI(Video), Component input only>
SCREEN
ARC
Full
Auto-configure
Original
Clock
Phase
Position
HDMI
Full
Original
AutoConfigure
This function is suitable for analogue signal input only. This button is for the
automatic adjustment of the screen Position, Clock and Phase.
Clock
This function is suitable for analogue signal input only. To minimize any vertical bars or
stripes visible on the screen background. The horizontal screen size will also change.
Phase
This function is suitable for analogue signal input only. To adjust the focus of the
display. This item allows you to remove any horizontal noise and clear or
sharpen the image of characters.
Note
When the Interlace Signal is inputted at the RGB source input level,
the Auto-Configure, Clock, Phase menu can't be used.
A18
On Screen Display(OSD) Selection and Adjustment
Position
This function is suitable for analogue signal
input only. To adjust position of the screen.
Press the AUTO/SET button to display the
sub-menu for position.
SCREEN
ARC
Auto-configure
H-Position
Clock
Phase
Position
V-Position
H-Position: Moving the screen position horizontally.
HDMI
V-Position: Moving the screen position vertically.
HDMI
Video: Used when it is connected with DVD or SET-TOP BOX through HDMI.
* If you want to connect VCR, select VIDEO in this menu. Otherwise, you
may see noise in the margin of the screen due to the difference in the
screen size .
PC : Used when it is connected with PC through HDMI.
* If you want to connect PC, select PC in this menu. Otherwise, the screen
may be too large to support PC sub screen
Note
When the Interlace Signal is inputted at the RGB source input level,
the Position menu can't be used.
A19
On Screen Display(OSD) Selection and Adjustment
Adjusting PIP Mode (Multiple Screen) Functions
(To adjust the sub screen)
On/Off
Off
PIP Input
PIP
Position
On/Off
PIP Input
PIP
After selecting PIP in the PIP On/Off menu, the
following menu items can be adjusted.
To select an input signal for PIP
To adjust the position of PIP screen.
Position
On/Off
PIP Input
Position
* The following table is the available option to match the main screen and PIP screen.
PIP
RGB
PIP
DVI Component
Main
RGB
O
HDMI
(PC)
HDMI
(Video)
X
O
O
O
X
X
X
X
DVI
O
Compentnt
X
X
HDMI(PC)
O
X
O
HDMI(Video)
X
X
X
X
X
A20
Troubleshooting
Check the following before calling for service.
No image appears
Is the power cord of the • Check and see if the power cord is connected
properly to the power outlet.
display connected?
Is the power indicator
light on?
• Press the Power button.
Is the power on and the • Adjust the brightness and the contrast.
power indicator blue or
green?
Is the power indicator
amber?
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard
to bring up the screen.
• Try to turn on the PC.
Do you see an "OUT
OF RANGE" message
on the screen?
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "Controls locked" message on the screen?
Do you see “Controls
locked” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently
changed. You can unlock the OSD controls
at any time by pushing the MENU and (+)
button for several seconds: the message
“Controls unlocked” will appear.
A21
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
• Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the screen
background, vertical
bars or stripes are
visible.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
The screen color is
mono or abnormal.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true
color) at Control Panel - Settings.
The screen blinks.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
• Make sure the power voltage is high enough, It
has to be higher than AC100-240V 50/60Hz.
A22
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Make sure to check if the video card supports
Plug&Play function.
The audio function does not work.
No sound?
• See if the audio cable is connected properly.
• Adjust the volume.
• See if the sound is set properly.
Sound is too low.
• Adjust the volume.
A23
Specifications
Display
22 inches (55.868 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
22 inches viewable
0.282 mm pixel pitch
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Video Input
Signal Input
15 pin D-Sub Connector, HDMI connector
DVI connector(Digital), Component
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Input Form
Resolution
Max
Recommend
Plug&Play
Analog : VESA 1680 x 1050 @60Hz
Digital : VESA 1680 x 1050 @60Hz
VESA 1680 x 1050 @60Hz
DDC 2B
Power Consumption 0n Mode
Sleep Mode
Off Mode
Dimensions
&Weight
Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green), Composite
Digital(HDCP)
:
≤
≤
45 W(Typ.)
1W
1W
With Stand
Width
Height
Depth
Without Stand
50.17 cm / 19.75 inches
50.17 cm / 19.75 inches
42.19 cm / 16.61 inches
23.39 cm / 9.21 inches
33.74 cm / 13.28 inches
5.95cm / 2.34 inches
Net
5.8 kg (12.78 lbs)
Tilt/Swivel Range
Tilt
Swivel range
-5˚~20˚
355˚
Power Input
AC 100-240V~ 50/60Hz 1.0A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Power cord
Attached ( ), Detached ( O )
Wall-outlet type or PC-outlet type
NOTE
Information in this document is subject to change without notice.
A24
Specifications
PC INPUT Preset Modes (Resolution)
Display Modes
(Resolution)
1
2
3
4
5
6
7
8
9
10
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
Horizontal
Vertical
Freq. (kHz) Freq. (Hz)
31.468
31.469
37.50
37.879
46.875
48.363
60.123
67.5
63.981
79.976
70.08
59.94
75
60.317
75
60
75.029
75
60.02
75.035
Display Modes
(Resolution)
1680 x 1050
1680 x 1050
11
*12
Horizontal
Freq. (kHz)
Vertical
Freq. (Hz)
64.674
65.290
59.883
59.954
* Recommend Mode
Component Video INPUT
HDMI Video INPUT
Display Modes
(Resolution)
1
2
3
4
5
6
480p
576p
720p
720p
1080i
1080i
Horizontal
Freq. (kHz)
31.25
31.50
37.50
45.00
28.12
33.75
Vertical
Freq. (Hz)
Display Modes
(Resolution)
1
2
3
4
5
6
7
8
60.00
50.00
50.00
60.00
50.00
60.00
480i
576i
480p
576p
720p
720p
1080i
1080i
Notice
Forte Manager does not work in HDMI Video mode.
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
Blue
Amber
Off
A25
Horizontal
Freq. (kHz)
15.75
15.62
31.25
31.50
37.50
45.00
28.12
33.75
Vertical
Freq. (Hz)
60.00
50.00
60.00
50.00
50.00
60.00
50.00
60.00
Specifications
HDMI Type Pin Assignment
No.1
No.2
Type A pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
No.19
No.18
Signal Name
T. M. D. S. Data2+
T. M. D. S. Data2 Shield
T. M. D. S. Data2T. M. D. S. Data1+
T. M. D. S. Data1 Shield
T. M. D. S. Data1T. M. D. S. Data0+
T. M. D. S. Data0 Shield
T. M. D. S. Data0T. M. D. S. Clock+
T. M. D. S. Clock Shield
T. M. D. S. ClockCEC
Reserved(In cable but N.C. on device)
SCL
SDA
DDC/CEC Ground
+5V Power
Hot Plug Detect
Wire
Type A pin
A
B
A
A
B
A
A
B
A
A
B
A
C
C
C
C
D
5V
C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
T. M. D. S. (Transition Minimized Differential Signaling)
A26
How to Install the VESA Standard wall mounting
This monitor meets VESA-compliant mounting interface pad
specifications.
After moving the product to face
downward, make sure to place it on a soft
cloth or a cushion to avoid surface
damage.
PB
PR
COMPONENT
Y
1.
AUDIO
OUT
AC-IN
DC-OUT
HDMI
D-SUB
DVI-D
2. Separate the head and the stand with the
PB
PR
COMPONENT
Y
use of a screwdriver.
AUDIO
OUT
AC-IN
DC-OUT
HDMI
D-SUB
DVI-D
3. Set up the VESA standard Stand Base.
PB
PR
COMPONENT
Y
VESA wall mounting
Connected to another object (stand type and
wall-mounted type. This monitor accepts a
VESA-compliant mounting interface pad.This has to be purchased separately if
required.)
For further information, refer to the VESA Wall
Mounting Instruction Guide.
AUDIO
OUT
AC-IN
DC-OUT
HDMI
DVI-D
D-SUB
Kensington Security Slot
Connected to a locking
cable that can be purchased
separately at most
computer stores
A27
Digitally yours

advertisement

Key Features

  • 55.9 cm (22")
  • 1680 x 1050 pixels
  • 2 ms 300 cd/m² 3000:1
  • 45 W

Related manuals

advertisement