LG | LN705 | Owner's Manual | LG LN700 Owner's manual

LG LN700 Owner's manual
ENGLISH
Portable
Navigation
OWNER'S MANUAL
LN700 / LN705 / LN710 / LN715
Please read this manual
Navigation
carefully
before
operating your
device.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change
without
Table of contents
Safety
Parts
5-6
note
10
supplied
11-12
Name of each part
Frontpanel................................11
Rear/Sidepanel...........................12
Connecting
13-18
devices
Installation order for suction-mount cradle
.
.
.
.
.
.13-14
.
.15
Detachingthesuction-mountcradle.
.15-16
Installing the GPS aerial (Optional)
Connectingthecardreader...................17
ConnectingtheUSBcable.....................17
DisconnectingtheUSBdevice..................18
Downloadingfiles...........................18
.
.
Before
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
19-20
operation
Startingup................................19
Sourcemenu...............................19
Navigationfeatures..........................20
Getting
started with
navigation
21-30
NavigationMenu............................21
AddressScreens............................21
MyPlacesMenu............................21
Food,Fuel,LodgingMenu....................22
Map,Look&FeelMenu......................22
SettingsMenu.............................23
NavigationMenuButtons......................24
What'sontheMap?.........................25
RoadClassification..........................26
GPSNotFound.............................26
MapViews..............................27-28
PointontheMap............................29
NavigationScreenButtons..................29-30
CyclingThroughScreens.....................30
2
Table of contents
Finding
a
location with
31-50
navigation
Address................................31-32
AddressModes.............................33
AddressActions............................34
GotoyourDestination.......................35
Demo....................................35
RecentLocations.........................36-37
MyFavorites...............................38
FavoriteGroups............................39
FavoriteAlerts...........................39-41
AddFavoriteLocations.......................41
Food,Fuel,Lodging.......................42-43
Subcategories...........................43-45
Turn-by-TurnList............................46
ShowRouteorCancelRoute..................47
AvoidRoads.............................47-48
AvoidRoadGroups.......................48-49
AvoidRoadLocations......................49-50
51-56
Navigation settings
RoutePlanning.............................51
SelectMap................................52
Prompts................................52-53
Mapsettings..............................54
GPSSettings..............................55
UnitsofMeasure............................55
QuickNavigation............................56
About....................................56
Installation
57-61
requirements
PCRequirements...........................57
InstallingtheConsole......................57-58
InstallNavigationSoftware..................58-59
.59
Transferring a Map onto the SD Memory Card
.
.
.
.
ConsoleToolbar............................60
Importinga.CSVFile........................60
3
Table of contents
ImportingaFavorite.........................61
.61
FavoritesImportingFileStructure
.
Using
.
.
.
.
.
.
.
.
.
.
.
.
.
62-66
the software
MapScreenInterface........................62
Installingamap..........................62-63
MapCutterScreenInterface.................63-64
FocustheMap..........................64-65
FocustheMapbyRoute......................65
CutMap..................................66
LoadMap.................................66
RemoveMap...............................66
67-68
Photo view
GettingStarted.............................67
BrowsetoanImage.......................67-68
VIewImage................................68
Device SETUP UP
69
settings
LanguageSettings..........................69
Brightness.................................69
70-72
Troubleshooting
73
Specifications
74-75
Support-Hotline
Symbol
used in this manual
Indicates
special
notes and
4
operating
features.
Safety
note
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT
COVER(OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The
lightning flash with arrowhead symbol, within an equilateral
triangle is intended to alert the user about the presence of
uninsulated dangerous voltage within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation
equilateral triangle is intended to
important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
alert the
Disposal
point
within
an
to the presence of
user
of your old
appliance
1. When this crossed-out wheeled bin
product,
it
means
the
product
symbol is attached to a
by the European
is covered
Directive 2002/96/EC.
2. All electrical and electronic
products should be disposed of
municipal waste stream via designated
appointed by the government or the local
from the
separately
collection facilities
authorities.
3. The correct
disposal of your old appliance will help prevent
potential negative consequences for the environment and human
health.
4. For
more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
or the shop where you purchased the product.
This
product
interference
has been manufactured to
requirements
comply
of EEC DIRECTIVE
93/68/EEC and 73/23/EEC.
5
service
with the radio
89/336/EEC,
Safety
note
Always operate the vehicle in a safe manner. Do not become
distracted by the navigation while driving, and always be fully aware
of all driving condition.
Minimize the amount of time spent viewing the screen of the
navigation while driving and use voice prompts when possible.
Do not enter destinations, change settings, or access any functions
requiring prolonged use of the unit's controls while driving.
Pull over in a safe and legal manner before attempting such
operations.
Do not kink
or crease
power cable.
Fire can result from
Unplug
the AC
the power cable
place heavy objects
or
on
power cables.
damaged
electrical storms. Electrical shock
adapter during
may result.
Do not handle power
shock may result.
plug
and
adapter
with wet hands. Electrical
power off the player and unplug the AC
odors emit from the player or adapter.
Immediately
smoke
Fire
can
Make
Fire
or
result from
sure
can
improper
to insert the power
result from
improper
adapter
if
use.
plug tightly.
use.
Use
only the specified power adapter.
Using a different type of adapter may damage
(DC 10.5~16V)
The
appliance
is not intended for
persons without
supervision.
6
use
by
the
product.
young children
or
infirm
the
Safety
Note that malfunctions may
where static
Do not
use
electricity
the
occur
occurs
if you
use
the
product
in
places
frequently.
product near water.
product with wet hands.
Do not touch this
Do not
attempt
Do not
use
this
the
to
disjoin
product
or
repair
the
product yourself.
for other purposes than those described in
guide.
Do not
use
for many hours at
extremely
low
or
high temperature.
(-10°C~60°C)
Avoid to leave the
Take
special
product
in hot
attention when
or
humid
touching
the
place.
product box,
owners
manual and accessories to avoid cuts.
While
driving, keep
Do not
drop
the sound volume at
it and avoid
heavy impact
7
at
a
proper level.
anytime.
note
Safety
note
If the
notice
product emits an unusual odor or excessive heat, or you
anything else that seems unusual, do not use the product
and contact
our
Customer Service Center.
use soft and dry cotton cloth when cleaning the product.
water/detergent/benzene/surfactants as cleaning agents is
strictly prohibited.
Always
Use of
When
attaching a navigation holder, remove impurities in the area
attaching, and press suction button to avoid falling.
to
attach before
Do not
pull
out SD
program. It may
Do not
use a
Memory
Card
during
the
operation
of
navigation
mechanical trouble.
cause a
navigation in the extended period
discharge of battery.
of time.
It may result in
Please
obey
the
practical
traffic
regulations.
For the safe
drive, information on safe driving spot and frequently
occurred accident spot is included.
Voice
guidance
and map route may differ from the actual traffic
condition.
When
moving the product, separate the power from cigar jack and
separate the main body from holder or separate the holder from
window before
moving.
8
Safety
?
If you attach the
vacuum
disk
on
the
glass
for
a
long period
time, the pressure in the disk slowly reduces and the
of
vacuum
disk
falls off.
?
Because it
from
a
dashboard
?
can
sudden
dangerous
when the
holder falls off
stop,
support the Navigation holder.
too much force to
it
Navigation
install it close to the dashboard
can
If you apply
tightly fixed,
be
that the
while the
adjust
deform the rubber disk
can
so
connecting arm
connecting all the
is
components.
?
Even when the holder falls
to reinstall and
again
?
Please note that
negligence
?
use
off, you
damaged product
of the
user
This unit does not
can
follow the instructions
it.
due to
cannot be returned
support that
or
refunded.
two stations' map could be installed
into the SD memory card.
Winter
?
The
precautions
disk
vacuum
differences in
Summer
?
easily
come
off from the
glass
due to
precautions
When the
period
can
temperature between inside and outside the window.
vacuum
of
time, it
disk is
can
exposed
to the hot sunshine for
a
long
deform the rubber disk due to its
characteristics.
?
Remove the
a
?
vacuum
long period
The
disk and store it
separately
when
parking
for
of time.
internally installed battery can be damaged when kept at
sunlight in the car for a long period of time due to increased
direct
internal
temperature.
Separate
When the
span
the set and store it in
a
cool
place.
temperature of the battery rises, it
or cause an
explosion.
9
can
reduce the life
note
Parts
supplied
Main Set
SD
Memory
Suction-Cup
Card
Cigar Light
Adapter
Carring
Case
Installation
Quick Start
CD
Guide
Contents may be
notices.
AC
Adapter
USB Cable
Mount
changed
without
GPS aerial
(Optional)
SD memory card
SD
Memory
due to
a
Card in data terminal
equipment
map data. In this case, separate SD
purchased.
10
may have little reserve capacity
Memory Card should be
Name of each part
Front
panel
1
3
2
4
5
6
1.
GPS Antenna
Receive the satellite
2.
Volume Down
6.
SRC
Sound is softer.
LCD
Screen
5.
signals.
display according
button
menu
screen/move to the
menu.
3.
(Source)
Move to the main
to
Power On
.
(Press for a
long time)
/ Off
-
previous
screen.
button
short time / Press for
a
4.
Volume
Up
Sound is louder.
To activate the
with
finger
as a
menu
finger
function
through
touch mode.
11
LCD screen, press the
screen
Name of each part
Rear / Side
panel
1
2
3
6
4
7
5
1.
GPS Antenna
5.
Receive the satellite
2.
terminal
Speaker
Possible to
get
a
voice
guidance
service.
3.
4.
Reset button
Re-start the program in data
signals.
Docking
connector
Memory
Card Slot
equipment.
6.
USB connector
7.
Power
supply
connector
Save the latest map.
If
deleting
may
or
cause a
the map data in SD Memory Card
trouble in the navigation function.
altering
12
randomly,
it
Connecting
Installation order for the suction-mount
cradle
1.
2.
Select
a proper place on the windscreen.
Clean the inside of your windscreen, to remove
any dust and grease.
3.
Place the suction-mount cradle in the suitable
location
4.
Push black
a
5.
on
your windscreen.
plastic
lever to the left until you hear
click, fixing the cradle in position.
Push the front
panel
to the down until you hear
click, fixing it in position.
13
a
devices
Connecting
devices
6.
Plug
the small
into the socket
end of the DC power lead
the side of the cradle.
plug
on
7.
Plug the other end into your
(cigarette lighter) socket.
8.
To
vehicle's 12V
adjust the angle of front panel, slacken the
adjustable knobs on the cradle and then turn it
gently. In addition to tilting the cradle up and
down and from side to
front
9.
?
panel
When you
side, you can also rotate
cradle, from left, -45-45°.
in the
happy, tighten
up the knobs
again.
This
navigation player and its automotive adapter
designed for use in vehicles that have 10.5-16V,
negative ground electrical systems.
(This is standard for most vehicles.)
are
If your vehicle has a different type of electrical
system, the DC power system cannot be used.
?
When
attaching
impurities in the
a
navigation holder,
press suction button to avoid
?
Adjust the direction of
disturbing the driving.
?
Adjust
?
it to the
Be careful of
angle
falling
remove
to attach before
area
the
and
falling.
holder to
you
attaching,
prevent it from
can see
navigation
well.
from window
when you drive.
?
When
using
the
supporter, it
can
vibration from itself. Attach the
the dashboard
14
as
much
as
you
vibrate from the
supporter close
can.
to
Connecting
Detaching
1.
To
the suction-mount cradle
the
remove
lever to the
2.
cradle, pull the suction
mount
right.
If the cradle still doesn't detach from your
on the clear plastic tab at
windscreen, tug gently
the
edge
vacuum
of the suction mount, to break the
set.
Installing
the GPS aerial
This
has GPS antenna to receive the satellite
product
signals.
(Optional)
Exterior antenna, the separate purchase, may
improve the receiving condition of satellite signals
when the
signals
1.
Peel off the
2.
Plug
are
poor.
protective sheet on rear.
jack end of the GPS aerial into the
on the backside of main body GPS
the
socket
antenna.
15
devices
Connecting
devices
When
(on
the aerial inside the vehicle
Installing
the dashboard
shelf)
or
Affix the metical sheet
on as
level
window. Please the GPS aerial
(The
?
Maker
sure
the surface is free of
before
affixing
The metal sheet contains
may leave
removed.
?
a
mark
Some models
allow
surface
as
the metical sheet.
on
GPS aerial is fastened with its
grime, oil, etc.,
?
a
where the GPS aerial faces outside the
possible
use
a
magnet.)
moisture, dust,
the metical sheet.
strong adhesive and
the dashboard if it is
on
windows
glass
that does not
from GPS satellites to pass through.
On such models, install the GPS aerial on the
signals
outside of the vehicle.
When
(on
Installing
body)
the aerial outside the vehicle
the
Put the GPS aerial in
possible,
When
Make
such
routing
a
as on
a
positions
the roof
or
as
level
as
boot lid.
the lead in from the top of the door
U-shared
loop
in the lead
on
the outside to
prevent rainwater from flowing along the lead into the
interior of the vehicle.
16
Connecting
Connecting
1.
Plug
devices
the card reader
the SD card into the
port of your
card reader.
2.
Plug
the card reader into the USB
port of your
computer.
3.
The icon is
displayed in
successfully connected.
Connecting
the PC
tray if
the USB cable
Not
1.
Connect the AC
2.
your unit and then to main power socket.
Switch the unit on.
3.
Plug
one
adatpter
to Power connector of
end with the USB
port
on
the back of
your PC and then plug the other end into the
USB port of your unit.
4.
?
The icon is
displayed in
successfully connected.
ActiveSync
installation is
the PC
required
tray if
for USB
operating
Download the lastest version of Microsoft
system.
for your Navigation. ActiveSync... that
wonderful Microsoft program for synchronising data
between your Navigation and PC. It loads itself
ActiveSync
automatically,
then sits
piece
?
Navigation with your PC,
to synchronise any
change.
syncs your
there, patiently waiting
of data that you
The
tray icon may be hidden in some Windows XP
operating system settings.
For more information, see Transferring a Map onto
"
?
the SD
Memory
Card"
on
page 59.
17
supplyed.
devices
Connecting
Disconnecting
Wait until you
the USB device
get message saying that you can
the device before disconnecting the
a
safely unplug
USB device.
1.
The safe
remove
icon is in the
next
system tray
to the clock.
2.
Click
on
the icon to
eject
the
player
from the
computer and select the 'Safely remove'
3.
message.
There will be
4.
You
a message indicating that it is
safe to disconnect the player.
can now go ahead and
reader from the PC.
Downloading
1.
Connect
one
unplug
now
the memory
files
end with the USB
port
on
the back
of your PC and then plug the other end into the
USB connector of your Player.
( Or connect the Card Reader to your desktop PC
2.
3.
4.
?
by using a USB.)
Open Windows Explorer on PC.
Removable disk is displayed in Window explorer.
Make the folder you want to use.
Select the file you want to save, then
drop it to the removable disk.
Don't
remove
downloading
?
the USB cable while
a
drag
uploading
and
or
files.
10% of the memory capacity is for the available
space needed for working program. Be careful to
download any photography file.
18
Before
Starting
operation
up
The
navigation software and the digital map material
supplied on the memory card. Installation occurs
relatively automatically.
are
1.
Switch the
2.
Place the memory card in the
system's memory card slot.
3.
The
navigation
and
can
Navigation
device
on.
navigation
software is stored
be started
on
the card
immediately.
Only
The
navigation device needs a few seconds to
start. (Map data is loaded in the background)
4.
It may take
some
time until the GPS receiver has
acquired enough satellites during
GPS navigation equipment.
initial
use
of the
use
ADATA
LEXAR
ACE
Mosco
Apacer
Panasonic
ATP
PDC
Billionton
RIDATA
Buffalo
Samsung
Buffalo RSDC
DANE-ELEC
DYNAMIC
eFilm
F FROM
Source
menu
When you start the device the SOURCE
menu
is
displayed.
can
tap:
The NAVI button to open the Navigation System.
For more information, see "Getting Started with
Navigation"
on
page 21.
?
The PHOTO VIEWER button to open the Photo
Viewer. For more information, see "Photo Viewer"
?
The SET UP button to
on
page 66.
For
more
Settings"
Pleomax
Samsung
Pleomax 66X
SanDisk
SanDisk(SOI)
Hagiwara
SanDisk
Extreme
HP
SanDisk Ultra II
I.O.D
SimpleTech
Imation
Teravit
KINGMAX
Toshiba
Transcend
From this menu, you
?
the memory cards
recommends
information,
on
configure
see
the device
"Device SET UP
page 68.
19
settings.
Before
operation
Navigation
features
The
Navigation System provides the
following features for easy navigation:
?
Able to install and
use
your
navigation
day
and
night
device in
minutes.
?
Full
screen
voice
?
2D/3D
maps with
precise
guidance.
Able to
quickly
create
a
route for any distance.
?View
your route by a demo program that moves the
location icon from the current location to your
selected destination before
?
Navigate by selecting
starting navigation.
address from the Contact
an
folder.
?
Cross border
?
Intuitive
without
navigation
menus
switching
maps.
and touch-screen buttons for easy
input.
?
Instant address retrieval from recent
favorite
?
or
points
locations,
of interest.
Provides favorites alerts.
?Awide
?Achoice
?
destinations,
selection of maps from all
of many
the world.
major languages.
Attractive map and
screen
and
?Totally portable,
your daily commute
20
over
format.
can
be used in
or on
vacation.
a
vehicle
during
Getting
Navigation
started with
navigation
Menu
When you start the Navigation System, the Driver
Warning screen is displayed. Please review the
provided information and tap the I Agree button.
Navigation menu appears, as shown below.
The
When you have the Main Map screen displayed, you
can press the SRC button to display the Navigation
menu.
Address Screens
The Address button lets you
as shown below.
For
a
complete description
address,
My
see
"Address"
menu
?
address,
v
of how to
navigate
to
an
page 31.
Places button, the
My
following
appears.
My
v
Places button lets you:
page 56.
Navigate
to
a
favorite location
Favorites button,
on
?
an
Specify an address or place to which you can
navigate with a single tap on the Home button.
For more information, see Set "Quick Navigation"
on
?
to
Places Menu
When you click the
The
on
navigate
as
by tapping the My
"My Favorites"
described in
page 38.
Navigate to a previously visited destination by
tapping the History button, as described in "Recent
Locations"
on
page 36.
21
Getting
started with
v
navigation
Food, Fuel, Lodging Menu
When you tap the Food, Fuel, Lodging button, the
first screen of popular place categories appears, as
shown below.
The
"Food, Fuel, Lodging" button lets you navigate to
interesting places, such as beaches,
parks, hotels, museums, and restaurants. For more
information, see "Food, Fuel, Lodging" on page 42.
thousands of
Map,
v
You
Look & Feel Menu
can
tap the Map, Look & Feel button
to
determine the map display and to show the
generated route after you have selected a location.
The
?
"Map,
Look & Feel"
see
"Map
toggle
Views"
on
button. For
more
information,
page 26.
Display the map view for either day or night driving
by tapping the Day/Night Mode toggle button. For
more information, see "Map Views" on page 26.
?Avoid
toll roads
Avoid Roads
on
?
lets you:
Display the map in 2-dimensional or 3-dimensional
views for either day or night driving by tapping the
2D/3D Mode
?
screen
or
selected streets
button,
as
by tapping
page 48.
Display complete, step-by-step directions to your
by tapping the Turn-by-Turn button. For
more information, see "Turn-by-Turn" on page 46.
destination
This button is disabled when
?
the
described in "Avoid Roads"
Display
screen
no
route exists.
your complete route on the Main Map
by tapping the Show Route button.
This button is disabled when
22
no
route exists.
started with
Getting
Menu
Settings
The
Settings button, at the bottom of the
My Places and Map, Look & Feel menus, lets you
configure your settings options. The first "Settings"
is shown below.
menu
The
?
"Settings"
Specify
screens
the route
let you:
type, Quickest
or
whether to allow for U-turns. For
see
?
"Route
Planning"
on
Shortest, and
information,
more
page 51.
Choose among different maps on your memory
by tapping the Select Map button. For more
card
information,
?
Specify
by tapping
Specify
tapping
"Select
Map"
page 52.
on
prompts that you want to
the Prompts button. For more
or
see
visual
"Prompts"
on
see
use
page 52.
map orientation, font, and zoom features
the Map Settings button. For more
information,
?
see
voice
information,
?
"Map Settings"
by
page 54.
on
Display the GPS configurations by tapping the
Signal button. For more information, see
"GPS settings" on page 55.
GPS
?
Specify
the
system
measurement units
the Units of Measure button. For
see
?
"Units of Measure"
Select
?
on
more
by tapping
information,
page 55.
or place to which you can
single tap on the Home button,
located in the My Places menu. For more
information, see "Quick Navigation" on page 56.
an
navigate
navigation
address
with
a
Display copyright and Navigation version
information by tapping the About button.
23
v
Getting
started with
navigation
Menu Buttons
The
button
Map
displays
the Main
The Cancel Route button
Map
stops the
screen.
current
naviga-
tion and clears the route.
The SRC button lets you exit from the Navigation
System and displays the device's Source menu.
The More button lets you
move
to the second
move
to the
menu
screen.
The Back button lets you
previous
menu
screen.
The
Settings button, at the bottom of the My Places
Map, Look & Feel menus, lets you configure
your settings options.
and
The
Help
button
information.
24
displays
technical
support
Getting
What's
on
When you
menu
the
tap
the
started with
Map?
on the Navigation
Map screen appears. You
displayed on this screen to view
Map
button
screens, the Main
can use
the icons
your route.
Directions Bar
When you have calculated a route, the Directions bar
displays information about your next turn. Click this
bar for
turn-by-turn
directions.
Shows your current location while in
mode.
navigation
a
complete
list of
Your current location.
Your last known location when the GPS
signal
is
unreliable.
Zoom Out button
Reduce the map level.
Zoom In button
Enlarge
the map level.
Compass
Compass displays
The
the travel direction.
Menu Button
GPS-Generated Information
The GPS-Generated Information bar is
a toggle
displays the remaining travel distance and
time, and speed and altitude, and street name
button that
travel
and address number.
Volume
The
generated
route.
Your selected destination.
25
navigation
Getting
started with
navigation
Road Classification
Destinator classifieds different roads
the
following
Primary
on
the map
by
colors.
Roads
Secondary
Roads
Local Roads
Pedestrian Paths
GPS Not Found
When you first start your navigation device, you will
hear the message "Signal too low". This message
that your navigation device hasn't yet located
reliable GPS signal. Check that your device is
connected and has a clear view of the sky. If after
means
a
five
minutes, you have
go to the
not located
"Support-Hotline"
section
a
reliable
on
signal,
page 74.
Please check that:
?
The device has
sky for
reception. Navigation cannot
calculate the route if there is no GPS reception
(for example, in a tunnel).
uninterrupted
?
The
the
a
clear view of the
GPS
navigation device
cigarette lighter.
26
is
charged
or
connected to
Getting
Map
started with
Views
From the
Map, Look & Feel menu, you can
determine whether you want to see a two
dimensional or three dimensional map in daylight
nighttime
or
conditions.
The 2D Day Mode View is optimized for a daytime
viewing. 2D views let you manually pan or zoom.
For an example, refer to "2D Day Mode Map View".
From the
Map,
button to view
Look & Feel menu, tap the 2D Mode
two-dimensional map. If the map
a
already appears in two-dimensions,
displayed on the toggle button.
3D Mode is
The 2D
Night Mode View is optimized for night
driving or adverse weather conditions. For an
example, refer to "2D Night Mode Map View".
You
can
tap the Night Mode button
to
display
the
map in night conditions. If the map already appears
in night mode, Day Mode is displayed on the toggle
button.
The 3D Mode
with
Day
View
or
Night
View
provides you
night driving.
Map View"
three-dimensional map for day or
For an example, refer to "3D Day Mode
a
and "3D
Night
From the
Mode
Map
View".
Look & Feel menu, tap the 3D Mode
three dimensional map. If the map
appears in three dimensions, 2D Mode is
Map,
button to view
already
displayed
on
a
the
toggle
button.
27
navigation
Getting
started with
2D
Day
2D
Night
3D
Day
3D
Night
navigation
Mode
Map
Mode
Mode
28
Map
Map
Mode
View
View
View
Map
View
started with
Getting
Point
You
on
the
Map
navigate to any point by tapping its location
directly on the Main Map screen. This feature is
especially handy when you want to navigate to a
specific point on the map, but you don't have the
can
street address. When you
context menu appears.
?
Go There
Add to
on
the map, the
This button lets you calculate
--
from the map
?
tap
a
route
point.
This button lets you save
the map as a favorite destination. This
feature lets you quickly save a location that you
point
My
Favorites
--
a
on
would want to return to later.
?
Set
Origin
point
designation.
as
selected
--This button lets you designate the
as the starting point and not the
Navigation Screen
The
following buttons
navigation screens.
Buttons
appear
on
many of the
When you
tap the Next button for a selected
address, group, or place, Navigation automatically
opens the next screen in the sequence.
After you have specified your destination, tap the
Next button to display a map screen showing your
selected location.
This map lets you determine a route type and
provides a GO! button, which instructs Navigation to
calculate the route from your current location to your
selected destination.
When you tap the Back button,
you to the previous screen.
Navigation
29
returns
navigation
Getting
started with
navigation
When you tap the GO! button, Navigation calculates
the route to your selected destination.
The Actions button
options
The
provides
list of command
a
available for the selected address
or
place.
button lets you
Hide/Display Keyboard toggle
or remove the keyboard.
show
The
Save, OK,
or
Done buttons confirm your value
and returns you to the
preferences
Cycling Through
Every navigation
through
?
?
the
Selecting
Selecting
a
sequence of
screen
map.
Screens
function in the
Address, Food, Fuel, Lodging,
consists of
menu or
system, such
or
My
screens.
sequences
by
as
Favorites
You
can
cycle
either:
an
item from the list and
an
item form the list and
tapping
tapping
it.
the Next
button.
The sequence ends with the Show on Map screen,
where the destination is displayed and the GO!
button is available for you to calculate
You must first select
a
route.
item from the list to
cycle
sequence, and for the Actions,
Next and Back buttons to be enabled.
through
the
an
screen
30
Finding
a
location with
navigation
Address
When you click the Address button, the Address
screen appears, as shown below.
1. Enter Address
2.
v
City
v
3. Street
v
4. Address Number
5. Show
on
v
Map
31
Finding
a
location with
You
the
can use
navigation
keyboard
characters of the address
to enter the first
name.
The characters
appear in the Address field. Navigation automatically
searches the Address list for the first occurrence of
the entered characters. After you have selected a
city, Navigation displays the next address field, such
as
street and address number.
You
can
also
tap the Next button
the sequence of address
The
following
command
to
move
through
screens.
keys
are
available to
enhance your search process:
The Scroll buttons let you move up or down the list
of address items, such as city or street names.
The
Hide/Display Keyboard toggle button lets
or shorten the address list by hiding or
displaying the keyboard.
you
extend
The Select
You
can
tap
lets you
numeric characters.
display
the Umlauts
button to
display
a
keyboard
of umlauts characters.
The Erase
an
key
key
lets you delete the last character in
address field.
You
can
tapping
address
change your address search method by
the Mode button to select from a variety of
formats,
as
described in "Address Modes".
If the entered characters
are
not found at the
beginning of the name in the Address list, the Smart
Search System automatically searches for the
entered characters throughout the entire list, for
example, in the middle or the end of the name.
32
Finding
a
location with
Address Modes
You
can
define the information used to locate
an
address
by tapping the Mode button. Navigation
provides a variety of address formats, as described
below.
This sequence
screens :
You
can
displays the following address
City, Street, Address Number.
also
navigate
to
city
or
street
only.
When
you have selected a city, the first entry of the Street
Name list is City Center. When you have selected a
street, the first entry in the Address Number list is
Street
Midpoint.
City-Street
is the default format.
This sequence
screens :
displays the following address
Street, City, Address Number.
Lets you enter
designate
a street name without having to first
city. Useful when you're looking for an
a metropolitan area where there are many
a
address in
cities and towns.
This sequence
screens :
City,
displays
the
following
address
Street 1, Street 2.
Lets you locate an intersection by
names of two intersecting streets.
entering
the
This sequence
screens :
displays the following address
Zip Code, Street, Address Number.
This mode lets you locate a street address by
entering the zip code, without entering a city name.
Useful when you have no city information
has multiple zip codes.
city
33
or
if the
navigation
Finding
a
location with
You
can
travel to
navigation
select another map of
by vehicle.
This feature is available
Map
country that you
can
when you have the
maps installed:
following
?
only
a
of the
country in which you're currently
located.
of the
?
Map
?
The map of the
For
to which you wish to travel.
major
roads for the continent that
map to another
roads of Europe)
connects
major
country
one
example,
travel to
if you
are
(for example,
the
in Paris and you want to
Munich, select the map of Germany and
designate Munich City Center as your destination.
Navigation automatically displays the map of France
when traveling on local roads of that country, a map
of Major Roads of Europe when traveling on a
European highway, and the map of Germany when
traveling on local roads of that country.
Address Actions
When you have specified an address, tap the
Actions button to select from the following
commands:
Lets you designate the selected address as the route
Use this command when calculating a route
origin.
from
a point other than your current location. The
navigation device displays the selected location as a
starting point only for a few seconds before returning
you to your current location.
Note: You are still receiving the GPS
Lets you
see
Lets you add
the selected address
an
signal.
on
the map.
address to your list of favorite
locations, as shown in the figure below. For more
information, see "My Favorites" on page 38.
34
Finding
location with
a
Go to your Destination
After you have specified the address, tap the Next
button. Navigation shows your destination on the
Map
screen
before
calculating
route. Check that
a
the destination address is correct at the
top of the
If you want to change the destination, tap the
Back button and change your address entries. When
screen.
are ready, tap the GO! button to create
your selected destination.
you
a
route to
1. Next Screen
2. Show
on
Map
3. Calculate Route
Demo
When you click the Demo button, Navigation moves
the cursor along the path you would take to your
destination,
You
as
shown below.
review the route you would go on before
instructing Navigation to calculate your route and
can
specify
button
roads to avoid
on
the
information,
Map,
see
by tapping
Look & Feel
"Avoid Roads"
the Avoid Roads
For more
page 47.
menu.
on
Demo mode will be wrong operations (especially over
But there are no problems in real driving.
300km).
35
navigation
Finding
a
location with
navigation
Recent Locations
The Recent Location
existing
lets you select an
list of destinations that
screen
destination from
a
you have
previously traveled to.
Navigation automatically stores the
last 64
destinations in memory. As each new route is added
to the top of the list, the older destinations at the
bottom
are
erased.
To
navigate to a recently-traveled destination, tap
History button on the My Places menu. From the
the
Recent Locations screen, select a location and tap
the Next button. A map appears showing the
specified location. Tap the GO! button to calculate
the route.
1.
Opens
Recent Locations
2. Recent Locations
3. Next Screen
4. Show
on
Map
36
Finding
a
location with
From the Recent Locations screen, you
Actions button to select from the
can
tap the
following
commands.
Lets you designate the selected address as the route
You would use this command when calculating
origin.
a
route from
Note: You
a
are
point other than your current
receiving the GPS signal.
location
still
Lets you add an address to your list of favorite
locations. For more information, see "My Favorites"
on
page 38.
Lets you delete
a
recent location.
Lets you clear all locations in the Recent Locations
screen.
Displays
the address information for the selected
location.
When you tab the Actions
from the following options :
button, you
can
choose
Lets you add the specified address to your list of
favorite locations, as shown in the figure below.
This button lets you designate the selected address
as your point of origin. This is helpful when you want
Navigation to calculate a route from a point other
than your current location.
37
navigation
Finding
a
location with
My
navigation
Favorites
A Favorite is
a
destination that you have stored for
easy retrieval.
To
favorite destination, open the My Places
tap the My Favorites button.
access a
menu
The
and
My
Favorites
screen
groups. When you tap
your favorites
selected group,
displays its stored locations.
displays
on a
Navigation automatically
Tap the selected location to show your destination
a map. Tap GO! button to calculate your route.
1.
Opens My
2. Favorites
Favorites
Groups
3. Favorites Locations
4. Move to Next Screen
5. Show
on
Map
The MY FAVORITES folder is the default folder
where all favorites
group.
38
are
stored if not
assigned
to
a
on
Finding
Favorite
You
can
a
location with
navigation
Groups
tap the Actions button from the My
screen to add, edit, or delete groups,
Favorites
as
described below.
When you
tap this button, the Favorites Group
appears. Enter the group name and select
icon to identify the group, as shown below.
screen
an
The icon identifies all destinations located in that
group,
as
When you
displayed
on
the map.
tap this button, the Favorites Group
appears with the name and selected image of
the highlighted group. You can change the name and
screen
icon.
When you tap this
associated entries
button, the selected group and its
are
removed. The
My
Favorites
group cannot be deleted.
Favorite Alerts
Alerts let you know that you are within
distance of a favorite location.
You
can
tap the Alerts button
a
certain
to set the distances for
the 1st and 2nd Alerts. When you travel closer than
the designated distance, the alert will sound, as
shown below.
39
v
Finding
a
location with
navigation
Examples:
You have
a group called "Shopping" that includes all
of your favorite stores. An alert appears on the
screen when you are closer than the designated
distance to the stores in your group, providing an
opportunity to consider whether you would like to
stop and shop.
You have
a group called "Projects" that include
addresses of your bank, grocery store, garage,
hardware store, doctor's office, post office, and
so
When the alert is set, navigation reminds you
about these places when you come within close
proximity to them.
on.
You
are
going
on a
trip
and friends have
recommended certain restaurants that
are on your
called
"Restaurants"
group
and enter the restaurant addresses. As you take your
route. You
can
create
a
an alert will go off when you
of these restaurants.
trip,
Favorite Alert
settings
come
within range
affect all Favorites
Groups.
The 2nd Alert must be set to go off at closer distance
than the 1st Alert.
Alerts
can be set for a group but not for individual
locations. Of course, you can always create a group
that has just one location.
40
Finding
You
can
a
location with
disable the alerts for all groups
setting to Off.
by selecting
the 1st Alert
You
disable the alerts for
particular group by
selecting
tapping the Show/Hide
Symbol on Map toggle button. Disabled alerts are
identified by a red diagonal line through the symbol.
can
a
the group and
Activate that disabled alert
and
tapping
the Show
by selecting
Symbol on Map
the group
button.
Add Favorite Locations
Ta p MY FAVORITES
have created to
or
display
any selected group that you
its locations. You can save a
location to your favorites groups from the Address,
Recent Locations, or POI screens. For more
information,
"Add to Favorites"
see
on
page 37.
From this screen, you can tap the Actions button to
display the following commands.
Lets you designate the selected location as the route
origin. You would use this command when calculating
a
route from
Note: You
a
are
point other than your current
receiving the GPS signal.
location.
still
Lets you see the map with the selected favorite
destination for you to review before creating a route.
Lets you change the name, comment,
location for the selected location.
Tap
the button to
remove
or
group
the selected location.
41
navigation
Finding
a
location with
navigation
Food, Fuel, Lodging
The
Food, Fuel, and Lodging list is
a
collection of
hundreds of
interesting or useful places organized by
easy-to-find categories. For example, you can use
navigation to guide you to a mall, hotel, restaurant, or
gas station.
From the navigation menu, tap the Food, Fuel, and
Lodging button. The first Food, Fuel and Lodging
Popular Category screen appears, as shown below.
The More button located
Lodging
screen
displays
on
the second
the list of all
Food, Fuel,
categories,
as
shown below.
You
can find a category by tapping the Hide/Display
button and entering text in the POI
Keyboard
Category field. The Smart Search System
automatically displays the POI categories that match
the characters entered. An alternative way is to use
the Browse buttons to browse the POI Category list.
When
selecting a category, Navigation automatically
displays the category entries and the distance each
entry is from your current position. Select your entry
and tap or click the Next button to display your
selected destination
on the map and then
button to calculate your route.
42
tap GO!
Finding
1. POI
a
location with
Categories
2. POI Locations
3. Show
on
Map
From the Item Entries Actions screen, click the Sort
the category entries in
by ABC button to display
alphabetical order
Subcategories
Many categories
an even
have
subcategories
to
Station" may have many
subcategories
representing
brand
The
same
have
provide
for
greater list of choices. For example, "Petrol
a
particular
is also true for "Hotels". "Restaurants"
that represent different types of
American, Italian, and French, as
subcategories
food, such
each
name.
as
shown below.
43
navigation
Finding
a
location with
Search Near
You
can
tap
navigation
Location
a
the Near button to determine the location
area, where you want to search for a specific
such as a gas station, hotel, or restaurant.
The available
options
are
place,
listed below.
Lets you search near your current location.
This is the default value.
Lets you search near a specified destination.
For example, you know your general destination, but
not very much about
interesting locations in the area.
navigation to locate the tourist
attractions most appealing to yourself, family,
or friends. Note that this button is enabled only when
You
a
can use
destination is entered.
Lets you search near another address. For example,
you have set a destination, but on the way you want
to stop at another location. You can use this feature
to search
near
historical
sites,
that location for restaurants,
or
anything
lodging,
you want.
Enter the location distance to search for a designated
place. For example, if you enter 5 km, navigation
only searches within a five kilometer radius.
When you select a large search radius, you risk the
chance of finding too many locations, which makes it
harder to find the place that you are searching for. It
is best to start with
a
then make it
if necessary.
larger
small search radius
If you don't specify a search
searches the whole map.
44
size, and
radius, navigation
Finding
a
location with
Lets you customize your POI list by showing or
hiding the POI category symbols that you don't want.
When you hide
This mark only
a
category
means
a
your map. The
still available to you. You can
not appear
red mark appears.
that the
category symbol does
category locations are
on
always
show
a
hidden
category symbol by selecting the category and
tapping
the Show
Symbol
on
Map
button.
Actions
When you have selected a POI location, tap the
Actions button to display the commands listed
below.
Lets you designate the selected location as the route
You would use this command when calculating
origin.
a
route from
Note: You
a
are
point other than your current
receiving the GPS signal.
location.
still
Lets you show the map with the displayed destination
for you to review before creating a route.
Lets you add a POI
locations. For more
on
entry to your list of favorite
information, see "My Favorites"
page 38.
Lets you sort the entries of the selected category
or by distance from your current
alphabetically
location.
Displays
the address information for the selected
location.
Navigation initially displays
the entries
45
by
distance.
navigation
Finding
a
location with
Turn-by-Turn
navigation
List
After you have entered a destination and calculated
route, the Directions bar appears at the top of the
Map
screen,
the
displaying
following
?
The next turn direction
?
The distance to the next turn
?
The street
When you
name
a
information:
of the next turn
tap the Directions bar
or
click the
button on the Map, Look &
Turn-by-Turn
Feel menu, Navigation displays a complete set of
turn-by-turn directions from your current point to your
selected destination.
Use the Scroll buttons to
move
up
or
down the
directions list.
The
following options
The Route button
are
available:
displays
your entire route
the
on
screen, plus the travel distance and the
Estimated Travel Time Remaining (ETR).
Map
The Show Turn button
Map
to
it,
displays
the next turn
on
the
screen, including the street name, the distance
and the turn direction.
The Avoid button lets you avoid the selected turn in
the directions list. Navigation recalculates the route
automatically.
Note that when you exclude
recalculated route may take
46
longer.
a
turn, the
Finding
Show Route
From the
Map,
or
a
location with
Cancel Route
Look & Feel
Show Route
menu, you
can
tap the
button lets you display an
on the Map screen,
overview of your complete route
the total driving distance to your
estimated travel
destination, the
time, and the complete destination
address.
From the
Navigation Navigation
button
Route
stops the
menu
The Cancel
current
navigation
only after
and clears the route. This button is active
destination has been set.
Avoid Roads
You
can
specify
that certain roads be
permanently
excluded from your route calculations. Use this
feature when you want to avoid congested
boulevards, toll roads,
or
unsafe streets.
From the
Map, Look & Feel menu, tap the Avoid
Roads button. The Avoid Roads screen appears,
displaying
the Toll Roads and Avoid Road groups.
1. Avoid Roads
2.
Displays Groups
47
a
navigation
Finding
a
location with
3. Add
navigation
Group
4. Enter
Group
Avoid Road
Name
Groups
From the Avoid Roads screen, tap the Actions
button. The Actions screen lets you select from the
following
Create
commands:
a new a
example,
you
Francisco
that
area
group of roads to avoid. For
create a group called "San
can
Roads", where you designate the roads in
to be avoided.
When you tap the Add Group button, the Avoid
Roads Group screen appears. Enter the group
and
name
tap Save.
Select
a group and tap this button to change the
group name. When you tap the Edit Group button,
the Avoid Roads Group screen appears displaying
the group name. Change the group name and tap
Save. The
Roads
new name
is
displayed
on
the Avoid
screen.
Select
a group and tap this button to remove the
group from the Avoid Roads screen. The road entries
in this group are also removed.
48
Finding
When
selecting
location with
group route, you
a
Avoid
or
a
can
tap the Allow
button to include
or
exclude
all roads located in the group.
Avoid Road Locations
When you
tap Default
or an Avoid Roads group,
the
Navigation displays
group screen, which lets you
select roads to avoid. From this screen, you can use
the Allow
or
Avoid buttons to include
selected road when
1.
Displays
calculating
a
or
route.
Roads
2. Add Road
3. Enter Road Name
4. Show
on
Map
49
exclude
a
navigation
Finding
a
location with
You
can
navigation
tap the Actions button from this
select from the
following
screen
to
commands:
Lets you select a road. An address screen appears
for you to specify a city and street. When you have
completed updating your road information, tap Save
button.
Lets you rename the road and select a different
group. When you have made your changes, tap
Save button.
Select
a
road and
tap this button
to
remove
from your group. Navigation no longer
removed entry as a road to avoid.
the road
recognizes
the
Lets you show the map with the displayed destination
for you to review before creating a route.
Displays
the address information for the selected
location.
50
Navigation settings
From the
you
can
My
tap
Places
Map, Look & Feel
Settings button to display
the
menus,
the
shown below.
Settings
menus,
Route
Planning
You
or
as
tap the Route button from the Settings
specify the route type and whether to allow
for U-turns, as shown below.
can
menu
to
If the destination is correct, you can instruct
how to calculate your route by tapping
Navigation
either the Quickest route
as
or
Shortest route
options,
described below.
Route
Planning
The Quickest route
:
option
selects
the route that takes less time. Quickest route is the
default value.
The Shortest route
shorter distance.
not
always
faster
be the
on some
selects the route that is the
quickest,
roads than
U-Turn Enabled
Navigation
option
Remember, the shorter
:
as
on
route may
you are able to travel
others.
This check box lets you instruct
to include U-turns when
calculating
a
route.
Route
generation
detours, stops,
or
does not take into account any
delays along the route.
51
Navigation settings
Select
Map
This feature lets you change the currently selected
map to another map saved on your SD memory card.
If you want to store additional maps on your memory
see
Using software" on page 61.
"
card,
You
can
menu
to
tap the Select Map button from the Options
display
card. The Select
the maps saved
Map
on
your SD memory
displays map details
map currently used
screen
and version numbers. The
appears at the top of the list.
The
following
Lets you
Select
designate
Map
a
commands
selected map
are:
as
the current
map.
Lets you permanently remove a selected map.
Note: You cannot delete the current map.
Lets you refresh the screen when
card is inserted into the device.
a new
memory
Prompts
You
can
select the
types of voice and visual
notifications that you would like to use while
navigating. From the Settings menu, tap the
Prompts
button. The
shown in the
52
figure
Prompts
below.
screen
appears,
as
Navigation settings
Voice
Prompts
Speed Warning
car
exceeds the
This
:
prompt
you when your
not active
warns
limit. This
speed
prompt is
unless selected.
Route Recalculation
when
Navigation
prompt
:
This
prompt is activated
recalculates
a new
Unreliable GPS
Signal
:
This
prompt
GPS
signal
This
prompt is automatically active.
Drive
route. This
is not active unless selected.
warns
is too low and unreliable for
Carefully: This is a friendly
journey. This prompt
start of each
that the
navigation.
reminder at the
is
automatically
active.
Visual
Text
:
Prompts
Directional
prompts
are
displayed
in written
form.
Symbols
:
Directional
gram form, such
None
:
prompts
are
displayed
not
displayed.
as an arrow.
Directional
prompts
are
53
in dia-
Navigation settings
Map settings
You
can
Settings
click the
menu
shown in the
The
following
Map
Map Settings
button from the
to customize your map
figure
below.
map
settings
display,
as
are:
Orientation
Forward is up : This option orients the map
your forward direction is always at the top.
so
North is up : This option orients the map
North is always at the top.
that
so
that
Use Automatic Zoom
: When this option is selected,
speed dependent.
The map zooms out at higher speeds, displaying a
larger map area, and zooms in at slower speeds,
displaying a smaller map area.
If you manually change the zoom, the Automatic
the
zoom
is
Zoom returns to its
seconds of
Use
Larger
street
system level after several
inactivity.
Print
names
54
:
This
option
increases the size of
to make the map easier to read.
Navigation settings
GPS
Settings
Navigation
the GPS receiver to
uses
location. GPS
pinpoint your
automatically acquired and
and position are constantly
signals
are
your vehicle's location
updated. The GPS may take a few minutes to find its
initial location. For best results, ensure that the GPS
has
This
?
a
clear view of the
displays
screen
Longitude
-
the earth's
The
meridian of
?
Latitude
a
as
GPS information:
following
distance east
measured in
particular point
to
or
west
on
degrees from
the prime
Greenwich, England.
The
-
the
angular
surface,
the meridian of
sky.
south from the
angular distance, measured north
equator, of a point on the earth's
of
surface.
?
Speed
-
The rate of movement,
or miles per hour.
as
expressed by
kilometers
?
Altitude
?
The green lines that appear on the satellite image
represent the satellites that are sending GPS sig-
-
The
height
above
sea
level.
nals to your receiver.
Units of Measure
From the
button to
?
Imperial
?
Metric
--
Settings menu, click
specify the system's
--
Yards
Meters
or
or
the Units of Measure
units of measurement.
miles
kilometers
55
Navigation settings
Quick Navigation
You
can
define the Quick Nav. location
either the To Predefined Address
Category
in the Quick Nav.
the location is
selected, you
or
by selecting
To Nearest POI
Settings screen.
can navigate to
by tapping the Home
displayed on the My Places menu.
example, if you have selected "Petrol
When
your
address
button
For
as
the Quick Nav.
Home
Stations"
destination, when you click the
button, navigation automatically
route to the closest
hospital
or
creates
a
clinic.
About
Tap
the About
version and
56
copyright
button to
information
displays navigation
as
shown below.
Installation
Navigation
is
device, but
to add
to install the
PC
on
your
change maps,
Navigation Console on
or
proprietary
are required
you
to your PC.
Requirements
To install and
the
installed
already
requirements
use
the
Console, your PC
must meet
following requirements.
?
Microsoft Windows 2000,
?
A minimum of 300 MB free space for temporary files
An Internet connection for online registration
?
Installing
XP
the Console
To install the
1.
or
Console:
Navigation
Insert the
Navigation Disk into the PC's CD-ROM
Navigation Console Installation Wizard
prompts you to select the language used for the
drive. The
installation process. When you have selected
language, click OK.
2.
a
Please read the Welcome message and click
Next.
3.
From the Select
Directory
the recommended default
a
different
directory
screen, either accept
directory or browse to
to install the
Navigation
Console. Click Next.
4.
From the
language.
5.
screen, select the default
Click Next.
Language
The Installation Confirmation
screen
displays
your installation choices. If you are ready to
install, click Next. The Installation Status box
displays the progress of the installation
by clicking NavigationApps>Navigation
from the Windows Programs menu.
57
process.
Console
Installation
requirements
6.
If you want to change the language selection
the directory location before installing, click
Back, make your changes, and
or
return to the
Installation Confirmation screen, and click Next.
7.
When the installation is
complete,
button to close the wizard. You
click the Finish
can
open the
console
by clicking NavigationApps>Navigation
Console from the Windows Programs menu.
Install
To install
1.
Navigation Software
Navigation:
Insert
Navigation
Disk into the PC's CD-ROM
drive to launch the
2.
Navigation
Console.
Check that the
loaded and
Navigation proprietary software is
running. Verify that the device is con-
nected to the PC.
3.
Click the Install Software
Navigation
4.
The End-User License
displayed.
I Agree.
button to install
and Photo viewer to your device.
Agreement (EULA) is
carefully and click Yes,
Please read it
5.
Navigation prompts you to specify an installation
directory. Click Yes to select your device's default
application installation directory. Click No, if you
want to specify another device directory.
The Select Directory dialog box appears. Browse
to a directory in your device and click OK.
6.
The Installation
Applications status box displays
Navigation installation.
the progress of the
58
Installation
requirements
7.
The Information message box refers you to the
device screen for instructions.
8.
When
Navigation
installed,
has been
successfully
the Successful Installation message
box appears.
Transferring
a
Map
onto the SD
Memory
Card
1.
Connect the Card Reader to your
using a USB cable.
desktop
PC
by
2.
Insert your SD card into the Card Reader.
3.
Select the
4.
Click Install/Remove
5.
Remove the SD card from the Card Reader and
required maps (Be aware of the size
of your memory card). Click Change (bottom
right) and select Removable Disk.
Maps
insert the SD card into the
on
the toolbar.
navigation
device.
Although you can transfer a map directly to the SD
card by connecting the navigation device to the PC
via
a
USB
cord, it is much faster
the SD card
by using
to copy the map to
the Card Reader. Transferring
a
map directly to the device only should be considered
for extremely small map files.
59
Installation
requirements
Console Toolbar
The
following options are available
Navigation Console Toolbar:
This button lets you install the
System to your device.
This button lets you install
more
information,
see
from the
Navigation Navigation
or remove a
"Installing
a
map. For
Map"
on
page 61.
This button lets you customize an installed map. For
more information, see "Map Cutter Screen Interface"
on
page 62.
This button lets you download a list of your favorite
locations from your PC to the selected My Favorites
group
on
your device. For more information,
a Favorite" on page 61.
see
"Importing
Importing
1.
From the
Standard
Map
2.
3.
and
a
.CSV File
Navigation Console, click on a
Map. This will enable the Installing
Favorites Importer features.
The Converter
Click the Favorites
Importer button.
dialog is displayed.
Select the
file, specify
.csv
a
category
and click the Convert button. The
name,
Area
Report
displays a message stating that the content of
the file has been converted and that the file is
ready
for download.
60
Installation
Importing
You
can
requirements
Favorite
a
download
list of favorite locations from
a
your PC to your device. The list must be contained in
.csv files. As part of the download procedure, you
convert the
.csv
your device
by using
files to .dat format for
the
Navigation
storage
on
Conversion
utility.
Importing
Favorite
a
The Favorites
Importing file structure
(Comma-Separated Values) format.
Name
must be in
.csv
Code
Comment
Long.
Lat.
Zip
Navigation
39.21370
38.78903
8033
City
Street
House
Number
Favorite
place
1
Munich
Favorites
Converter
Comment 1
The
Longitude
the others
a
are
and Latitude
string
are
values. If
comma, the field must have
Column value is
separated by
next column's value and each
numerical values. All
string value contains
quotation marks.
a
a comma
row
starts
61
from the
a new
line.
Ariboweg
173
Using software
When you receive your device, Navigation is installed
on your SD memory card along with a series of
maps. This section provides information about
installing additional maps from the Navigation
Console. For information about installing the
Navigation Console, see "Navigation Navigation
Installation Requirements" on page 57.
Map Screen
Interface
On the
Navigation Console,
displayed.
Standard
a
collection of maps is
Maps
:
Maps
My Maps
:
that you have customized from a standard
map. For example, creating a map of London from
the standard map of the United Kingdom and Ireland.
:
Current maps
Installed
Maps
available for installation from your CD.
Maps
Installing
You
can
on
Map
a
install
your SD memory card.
map by selecting it from the
pane in the Navigation Console and
the Install/Remove Maps button.
Standard
a
Maps
clicking
The Target Device dialog box appears.
Select Storage Card. The amount of memory
available for the SD memory card appears on the
Device Memory Balance pane. The installed
Target
map appears in the Installed
1.
Select
Map
62
Maps
pane.
Using software
2.
Click Install
3.
Loading Map
4.
Target
5.
Installed
Map
Device and
Space
Maps
Map Cutter Screen
Interface
Due to memory limitations of your SD memory card,
you may want to customize a standard map by
selecting
visiting a
the
area you need. For example, if you are
number of European cities on business, you
may not want to install entire maps of those
countries.
You
Map
crop a standard map from the Navigation
Cutter screen. Select a standard map and click
can
the Cut
screen
The
following
move,
button to open the
Map
Map
Cutter
appears.
tools
are
provided
view, and designate
to
help
an area on
63
you easily
the map:
Using software
You
can use
left,
or
You
can use
the Pan tool to
the map up,
the Zoom tool to increase
the map detail. You
zoom in or out.
You
move
down,
right.
the
can use
can
also
use
tool to
Crop
decrease
or
the scroll bar to
designate
an area on
the map that you want to cut. When you have
selected your focus by using the focus tools, as
described below, click the Crop tool to designate
You
an
the standard map.
area on
the Cut tool to create
can use
from your
designated
Focus the
Map
The
tools
so
want to cut.
customized map
provided to help you center
you
designate the area that you
For example, perhaps you want the
following
your map,
a
area.
are
can
Center of London to be the center of your map. If you
are creating a very local map, perhaps you want to
make the office
You
can
map to
a
Address
or
the hotel the center.
click the Address tool to set the
Street
City,
dialog
box
Address,
provides
or
origin
of the
Intersection. The
the Show and Set
buttons to view and set the map focus.
You
can
click the POI tool to set the
point of interest.
categories in the left
to
a
The POI
dialog
origin of the map
box displays all
pane. When you click
a
category, the items associated with the category
appear in the right pane. You can click the Show POI
and Set POI buttons to view and set the map focus.
64
Using software
You
can
click the Select tool to set the
origin
of the
map by a predefined sub-region. A list of sub-regions
is displayed in a pane to the right of the map. When
you click
that
sub-region,
a
Focus the
Map by
area
is
highlighted.
Route
Navigation supports route cutting, which allows you
a map composed of points on a route.
To create the route, you must specify two or more
points. After the route has been created, you can cut
a map from your route specifications.
to create
Click the Route tool. The Route pane appears. Use
the Address and POI tools to set route points. Click
the Create Route button. Your route is
blue. Click the Cut
The
following
Map
highlighted
in
tool.
commands
are
described below:
Click this button to center the map
on
the selected
point.
Click this button to delete the selected
point.
Click this button to delete all selected
points.
Click these buttons to
move a
selected
point
up
or
down.
You
can
included
select the amount of
along
kilometers
You
can
or
the route's
is
:
Corridor
:
Route
miles.
select either the
determined
surrounding area that
path, as measured in
quickest route,
by speed limit,
or
as
the shortest
route.
65
physical
Using software
Cut
Map
When you have
Cut
as
designated
tool. The Cut
Map
shown in the
figure
You must enter
have entered
a
map
a name
Navigation prompts
You
can
your map area, click the
Map dialog
and description.
already exists,
name
that
you to enter
a
different
click the Estimate button to
size. This is
an
box appears,
below.
important
display
If you
name.
the map
feature when memory
space is limited.
Load
Map
On the
Navigation Console, you can refresh your
maps by clicking Tools>Refresh New Map Data.
Select the map that you wish to load by clicking on
the map image or select it from the list. A checkmark
represents
From the
button to
a
selected map.
Target Device pane, click the Change
specify where to install the map. You can
choose Removable Disk. After you have selected
your target device and have confirmed that there's
sufficient memory, click the Install/Remove Maps
button. Your selected maps
in the Installed Maps pane.
Remove
In the
installed and appear
are
Map
Device pane, click the Change button
and select the location from where to remove the
Target
map. You can choose
Installed Map pane.
Storage
Disk. This
updates
The Installed
the
Map pane displays a list of all the
loaded maps available. Select the check box by the
map you want to remove. Click the Install/Remove
Maps
button to
66
remove
the selected map.
Photo view
The Photo Viewer lets you view pictures from your
handheld device. This application recognizes JPG,
GIF
(not animation),
and BMP files. The Photo
Viewer's main features let you zoom in or zoom out,
rotate an image, and display a series of pictures
through
a
Getting
You
slide show.
Started
open the Photo Viewer by clicking the Photo
Viewer button on the Source menu, as shown below.
can
Browse to
an
Image
When you open the Photo Viewer, the Browse Image
screen is displayed, showing the top level folders on
your device,
as
shown below.
Click the folder icon to
display
its sub-folders and
JPG, GIF, and BMP image files.
You
can
tap the Page Up and Page Down
buttons to
display
the sub-folders and
arrow
image
files in
the current folder.
You
tap the Directory Up button to display the
immediately above in the folder hierarchy.
can
folder
67
Photo view
You
can tap the Slide Show button to view all JPG,
GIF, and BMP images in the current folder in Slide
Show mode. Photo Viewer
full-screen mode
tap the screen
tap again to return
can
You
can
can
automatically
to
once
show all
at
pictures
in
certain rate. You
stop the slide show and
to the Browse
tap the Exit button
a
Image
screen.
to close the Photo
Viewer and return to the Source
menu.
View
Image
Tap
image file icon in the Browse Image screen to
image appears in the View Image screen,
an
view. The
as
shown below.
The
following buttons are provided to
images from the View Image screen:
let you
display
The Previous
Image and Next Image arrow keys
display the previous or next image in the
sequence of image files located in the selected
lets you
folder.
The Rotate button lets you move the image
clockwise. Each tap rotates the image 90 degrees.
The Slide Show button lets you view all JPG, GIF,
and BMP images in the current folder in Slide Show
mode. Photo Viewer shows all
mode
pictures
in full-screen
can tap the
stop the slide show and tap again to
automatically
screen once
to
return to the
Image
at
a
certain rate. You
View
screen.
The Zoom In and Zoom Out buttons let you
increase or decrease the image detail.
The Return Arrow button lets you return to the
Browse Image screen.
68
Device SET UP
You
can
Set
Up
change
the
system settings by tapping the
button. The Set
Up
system settings that you
screen
can
shows all of the
change,
as
displayed
below.
You
can
tap the Back button
to return to
a
previous
screen.
Language Settings
This
for
screen
screen
lets you select the language to be used
and voice prompts.
displays
Brightness
This
screen
screen.
the
You
lets you determine the
brightness of the
power by selecting how long
stay on before it dims when running
on battery or on AC power.
can save
backlight
will
the device either
69
settings
Troubleshooting
If you want to play this product properly, there should be the same programs
in LGE folder) and maps(Existence in LGE folder) in the
?
(Existence
SD-CARD which
?
?
are provided by LGE.
modify the contents in LGE folder!
(Because it contains important data for Navigation and Photo viewer,
going to be out of order in case of misuse.)
Don't delete inner data of the product by using ActiveSync.
(Because it contains important data for Navigation and Photo viewer,
going to be out of order in case of misuse.)
Don't
erase or
it is
it is
Picture format
The Photo Viewer does not
display an image when either the image exceeds
image is saved as an invalid format. The Load Failure warning
message is displayed when the image file is too large. The Picture format is
not supported warning message is displayed when the image file is not saved
1.6 GB
in
or
if the
JPG, GIF,
?
JPG
?
BMP
?
GIF
:
:
:
or
BMP format.
Image file size should use less than 1600 MP(mega pixcel).
Image file size should use less than 500 MP(mega pixcel).
Image file size should use less than 500 MP(mega pixcel).
Cannot
identify
the current location.
(GPS
not
receiving)
GPS cannot be used indoors and must be connected to the power with ACC to
a vehicle in a location where the sky can be seen well.
When
initially connecting the GPS, it usually takes about 10 minutes to be
normally operating, but the connection speed can differ depending on the
weather condition, and surrounding obstacles.
If the GPS connection is unstable for a long period of time, try the following.
Check if the power is connected to the product.
Check if the back of the GPS product is in a location where the sky can be
?
?
seen
?
?
well.
If there
are high buildings or if you are under a tree, move to
there aren't any obstacles.
Check the GPS receiving condition from the GPS menu.
70
a
location where
Troubleshooting
Cannot hear the voice guide.
can hear the voice guide when you select the "SETUP.
But during actual driving, the voice guide is provided.
You
If the volume is too
low, adjust the volume
on
the left side.
If the volume is mute, press the AV OFF button
Cannot
see
on
the
right
side.
the map.
This is when you cannot
see
the map
even
when you have executed the
navigation menu.
This happens when
the data within the memory is damaged. Delete all the
data within the memory and newly install the data.
If the issue persists after the installation, contact the A/S center.
Map data
updated.
You must
and
dangerous
periodically update
Refer to the
homepage
area
information
are
not
newly
the map data.
for details
on
how to
update
the data.
The
path guide can be different from the actual path.
(Path guide error)
?
When the road is
?
When the
?
When
?
When
?
When
?
When
?
When
?
?
closely parallel.
road angle is very small.
there is an adjacent road when turning.
driving on a road that is narrowing fast.
driving through the mountain or where the road is too curvy.
the starting, passing and arriving locations are too close within 10
you have set the starting, passing or arriving location more than 1
splitting
km.
km
away from the road.
When driving through the tunnel.
When
driving through high buildings.
There is
on
a
difference between the
the map in the
Even
though
GPS is
driving
road and the road
product.
usually
very accurate, it has
When GPS receiver is
an error
range.
installed, there can be an error of about 5 to 15m. But
for newly constructed roads, the problem could be from the data update to the
map.
71
Troubleshooting
What is GPS?
The Global
Positioning System (GPS)
made up of
a
is a satellite-based navigation system
placed into orbit by the U.S.
originally intended for military applications,
Department
of Defense. GPS
network of 24 satellites
was
but in the 1980s, the government made the system available for civilian
GPS works in any weather conditions, anywhere in the world, 24 hours
There
are no
GPS
subscription
fees
or
setup charges
to
use
use.
a
day.
GPS.
GPS
GPS
GPS
Map matching
As
mentioned, the GPS used by this Mobile Navigation System
to certain
are
susceptible
Their calculations may on occasion place you in a location
the map where no road exists. In this situation, the processing system
understands that vehicles travel only on roads, and is able to correct your
errors.
position by adjusting
With map
it to
a near
by
road. This is called map
With
matching.
72
no
map
matching.
matching.
on
Specifications
ITEM
OS
CPU
SPECIFICATION
REMARK
Win CE 5.0
Centrality
Atlas-II ARM9
300 Mhz
MEMORY
External SD Card
LN700
:
256 MB
LN705
:
512 MB
LN710:1GB
LN715:2GB
DISPLAY
4 inch TFT LCD
Resolution 320 X 240
LG
Philps
LCD
Color 65,000
Touch Screen
CCFL (L-type)
Analog resisitive type
Mono, Internal Speaker
Max 1.5W
Backlight
AUDIO
GPS
SiRF star
(1EA)
III,
Internal Antenna
NAVI
Full
MAP
Navtaq
POWER
Voice Guidance
Map
DC 10.5~16V
Vehicle Power
Cigar-
jack Input
TEMPERATURE
Built-in BATTERY
INTERFACE
Operating : -10~60°C
Storing : -30~80°C
1000
mAh,
3.7 V
Mini-USB Port
USB 1.1
External GPS Jack
Multimedia
Electronic Picture Frame
BMP, JPG, GIF
Files
73
Compatible
Support-Hotline
If you have other questions about the
or Technical Support:
Navigation Device, please
contact your
supplier
www.lge.com/support/software.jsp
For
questions
site
or
on
products please visit
Support Team.
our
contact the
Monday-Fridays:09:00am-6:00pm
LG
Subsidiary
Country
Service Number
LG Electronics ESPANA S.A.
SPAIN
902 500 234
LG Electronics U.K. Ltd
U.K. / IRELAND
0870 873 5454
LG Electronics France
FRANCE
0825-826-822
LG Electronics Deutschland GmbH
GERMANY
01805 4737 84
LG Electronics Italia
ITALY
39 199600099
GREECE
+30-210-4800-564/8
0825-825-592
S.p.A
LG Electronics Hellas S.A
801 11 200 900
LG Electronics Benelux B.V
LG ELECTRONICS MAGYAR KFT
LG Electronics Polska
LG Electronics
Sp.
z.o.o
Portugal, S,A
LG Electronics Nordic AB
BELGIUM
070-233-557
LUXEMBOURG
32-70-233-557
Netherlands
0900-543-5454
HUNGARY
36-06-40-545454
Bulgaria
+359-070-1-5454
POLAND
801545454
PORTUGAL
808-78-5454
SWEDEN
0771 41 4379
DENMARK
8088 5758
FINLAND
0800 116 587
NORWAY
800 18 740
74
Support-Hotline
LG
Subsidiary
Country
Service Number
Austria
AUSTRIA
420 810 555 810
RUMANIA
RUMANIA
40 31 228 3542
CZECH PEPUBLIC
CZECH
420 810 555 810
SLOVAKIA
421 850 111 154
75
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising