LG TCH-M550R Owner's manual
Add to my manuals22 Pages
The LG TCH-M550R is a versatile car audio system that enhances your driving experience with its array of features. Enjoy the convenience of playing your favorite CDs, including MP3 CDs, through the CD player. With the CD changer capability, you can connect an optional CD changer to expand your music options. The built-in RDS tuner provides access to a wide range of radio stations, and you can save your preferred stations for easy retrieval. The detachable front panel offers protection against theft and allows you to take it with you when leaving your vehicle.
advertisement
▼
Scroll to page 2
of 22
TCH-M550R_Eng_23B STEREO CD CAR RECEIVER OWNER'S MANUAL MODEL To fully enjoy : TCH-M550R the features and functions of this new unit, recommend that you read this OWNER'S MANUAL carefully and completely. we Precautions CAUTION Use of controls CAUTION other than those RISK OF ELECTRIC radiation exposure. SHOCK DO NOT OPEN Laser component in this product is capable of emitting radiation exceeding CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK) adjustments or performance of procedures specified here in may result in hazardous or This label is located NO USER SER- the limit for Class 1. on the interior. VICEABLE PARTS INSIDE. REFER SERVICING TO QUALI- CAUTION:INVISIBLE LASER RADIATION WHEN OPEN AND FIED SERVICE PERSONNEL. INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. LASERSTRALNING STRALEN AR FARLIG. NAR VARNING:OSYNLIG AR OPPNAD Explanation Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a Attention:Quand point within is equilateral triangle intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. an TO REDUCE THE RISK OF FIRE OF ELECTRIC pas s'exposer LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT This Compact Disc SHOCK, DO The player apparatus shall and that To avoid electrical be shock, qualified do not open the personnel only. cabinet, Refer no placed objects on aux is classified as a LASER CLASS 1 LASER on product. the exterior. not be filled exposed to dripping or splashing with liquids, such as vases, shall the apparatus. Warning: Do not install this case or 2 ne CLASS 1 NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. to ouvert, The CLASS 1 LASER PRODUCT label is located WARNING servicing est radiations invisibles du faisceau laser. risk of electric shock to persons. The exclamation l'appareil DENNA DEL equipment similar unit. in a confined space such a book Before Use ? Do not optical pickup ? Make sure that unit; they may as ? or ? do not inside the hazard such exposure of laser rays. Ensure to let the ambient designed electrical on CD A defective or to during playback. disc by holding its drop out soiled disc inserted into unit ? Handle the ? Do not touch the surface of can cause inner and outer sound edges. the unlabeled side of the disc. temperature cool down before the unit. This unit is ground ? cause other foreign objects malfunctioning, or a safety or Notes When your car is parked under direct sunlight in summer, there may be a considerable rise in temperature inside the operating ? pins electrical shock car. ? to disassemble this unit. Laser rays from the are dangerous to the eyes. attempt to be operated system only. on a 12 volt DC ? Do not stick paper or etc. on the surface. ? Do not expose the disc to direct sunlight or negative replacing the fuse, be sure to use the fuse whose amperage rating is identical. Use of a fuse with higher amperage may cause serious damage to the unit. tape When Periodically wipe with a the contacts on the back of the front panel excessive heat. cotton swap moistened with alcohol. ? Clean the disc before outward with ? Never use a the disc from the center playback. Wipe cleaning cloth. solvents such as benzine or alcohol to clean the disc. ? This unit cannot be (using 12cm disc operated by only). 8cm disc 8cm 3 Table of Contents INSTRUCTION OPERATION Precautions.....................................2 Basicoperation.................................10 CD/MP3CDBasicOperation.......................11 CDAdvancedOperation..........................12 Radiooperation..............................13-14 RDSoperation...............................15-18 CDchangerPlayer(Optional)....................19-20 BeforeUse......................................3 TableofContents................................4 DisplayWindow..................................4 Frontpanel/Rearpanel............................5 Installation......................................6 DetachableFrontPanel............................7 Connectiondiagram..............................8 Connection.....................................9 REFERENCE Specifications..................................21 Display Window 123456 79 8 1. DISC indicator 8. EQUALIZER 2. MP3 indicator 9. XDSS indicator 3. STEREO indicator 10. SIGNAL LEVEL indicator 4. INTRO SCAN 11. MAIN DISPLAY SECTION 12. DISC PLAY indicator (SCAN) indicator XDSS 12 4 11 10 5. REPEAT 6. SHUFFLE 7. RDS indicator (RPT) indicator (SHF) indicator (EQ) indicator Front Panel/Rear Panel 12 345 17 16 15 67 14 13 89 121110 181920 button 11. TRAFFIC ANNOUNCEMENT ? CONTROL UP/DOWN dial 12. AS/PS ? SELECTION(SEL) 13. FUNCTION 1. EJECT 2. (Z) button (auto store/preset scan) (FUNC) DISPLAY WINDOW 14. BAND button 4. CD disc slot 15. ? Preset Station buttons 5. EQUALIZER ? CD PLAY/PAUSE 6. PROGRAM TYPE ? INTRO SCAN 7. ? ? REPEAT ? SHUFFLE ? DISC SELECTOR ? MP3 TRACK -10 /+10 ? (EQ) (PTY) button ALTERNATIVE FREQUENCIES REGIONAL 8. XDSS button 9. RELEASE 10. DISPLAY ( (REG) ) (DISP) (AF) button button button button 16. POWER button ? ? CD SKIP/SEARCH( SEEK/TUNE (+/-) button ) button 18. ANTENNA JACK 19 LINE OUT JACK 20. CD CHANGER JACK 21. POWER/ SPEAKER CONNECTOR (Optional) (Optional) button button (SHF) (PWR) (B/X) 17. button (1~6) (SCAN) (RPT) button button 3. button (TA) 21 button ( D-/+) button (D-/+) (Optional) button / MUTE button 5 Installation Bend the claws according to the thickness of the dashboard Before installing, ignition-switch is make sure that the set to OFF and the terminal of the car battery remove to avoid short-circuiting. a b Remove the existing c Install the installation sleeve. d Install the unit in to the installation sleeve. If there is already an receiver unit installation sleeve for the receiver unit in the must be removed. 6 a Slide radio into ISO-DIN frame. b Install c Slide radio and frame into dash dashboard, it screws d e Install dash removed from old radio. Install trim trim ring panel ring or adapter plate. to radio. The notch must be positioned on at the bottom. f Install into faceplate by fitting right edge position then pushing left edge closed. removing the unit from the installation sleeve opening. receiver unit. Make the necessary connections. Removing existing When ISO-DIN Installation Basic Installation If you need to remove the unit from the installation sleeve, proceed as follows. a b c Remove the rear supporter from the unit. Remove the front panel Insert the lever into hole of the from the unit. on one side unit,and pull the lever toward you. Do the same operation on the other side and pull out the unit from the installation sleeve. Detachable Front panel a b b c d a Protective Case Detachable Front The Front panel is Attachable Front panel designed to be removable for antitheft purposes. It is recommended that you remove and carry a Align A b push panel with you when leave your protective case is provided with open the b c d Hold the Pull it toward you Plase the front protective right side or panel into the drop subject it to gently. in the detaching attaching the front the display or The control buttons may not work properly if the front panel is not attached supplied or do not press control buttons. ? press high panel strong impact. Do not allow such volatile properly. If this the front panel. occurs, or or otherwise agents as insecticides to into contact with the surface of the front ? in any area temperatures or direct panel the front benzine, thinner, panel, b u tton to panel. When to Do not come the front panel the ? otes RELEASE() front panel. right part with ? ? Press the panel Do not leave the front exposed sunlight. unit until clicks. the unit for this purpose. a the left side of the stopper. the front car. panel ? Do not panel. try to disassemble the front panel. gently case. 7 Connection Diagram 1. WHITE LEFT : 2. WHITE/BLACK STRIPE WHITE 3. GRAY RIGHT: RED 4. GRAY/ BLACK STRIPE 5. GREEN 6. GREEN/ BLACK STRIPE 7. VIOLET 8. VIOLET/ BLACK STRIPE A PHONE LINE B (ORANGE) C GROUND DIMMER D (BLACK) (PINK) TO IGNITION (RED) IGNITION SWITCH CD CHANGER (optional) DIMMER SWITCH TO BATTERY : BACK UP (YELLOW) POWER ANT (BLUE) BATTERY POWER AMPLLIFIER CONTROL :REMOTE ON (Optional) (BLUE/WHITE) POWER ANT s CONTROL RELAY 8 Connection Precaution the terminal of the control relay Before for vehicles a make connecting, tion switch is set to terminal of the OFF, and battery that sure igni- remove the to avoid short in the connection A B manual the use as illustrated ? cord of each speaker ? From antenna To the wiring BLUE/WHITE ? This lead is for amplifier ORANGE : This lead is for connection to the Phone line. YELLOW to the which ? BLUE 4 3 2 1 This lead is for connection to : : This lead is for connection to : Connect the CD L FRONT Battery (back-up) the power is always supplied. changer (optional) Your car receiver works for CD changer a yet done, as on buy, can L with provided together changer. 2-Speaker if the scheme will be the CD R control unit which you later. The suitable cord shown REAR Connections L R R This lead is for connection terminal from : This lead is for connection to the : BLACK not ? : RED D of vehicle Colors (Remote on) ? semiautomatic antennas. 5 the Ground. From power amplifier's input jack ( 2 channel or 4 channel connection to the power ? PINK or 6 to ACC. common. of leads ? 8s terminal from which the power is supplied when the ignition switch is set diagram. Optional) C Connections the Dimmer line Make correct connections in 4-Speaker 7 otes Never power This lead is not used for vehicles with ? ? with antenna. circuits. ? equipped switch 1 FRONT 2 s 3 4 This lead is for connection to the full automatic power antenna. Power antenna load to be connected to 9 Basic Operation POWER ON and OFF ? Press POWER SELECTION button (PWR) other button to turn the unit ? ? or any (PWR) for more slot, than 2 The mode indicator following When the front turned panel is opened, automatically off. ? at the volume level memorized. MUTE FUNCTION ? MUTE button is operated as The MUTE any releasing mode mute state button is pressed again. FUNCTION This button (FUNC.) serves between CD and RADIO (CD 10 y RADIO) is when Button to switch lights PoptClassictRock up in the order. ? over operation. right CONTROL UP/DOWN adjust the sound quality or Tu rn VOL Turn left right Increase the volume Decrease the volume level. level. Increase the bass level. BAS TRB BAL state on/off. ? Tu rn left dial to before you turn off. Whenever you turn on the unit, it will follows. Pop : Optimized for R&B, soul and country music. b currently operate as ? When you turn off, the unit is memorized automatically the volume level Each press of the EQ button switches the unit to the other equalizer mode, it is otes ? (SEL) button treble, balance and fader. seconds to turn it off. ? Press the SELECTION repeatedly to select the mode you want to adjust from volume, bass, on. When you insert the CD in the CD it turns on Press POWER a EQUALIZER (EQ) Button Button (SEL) FAD ? Classic music. Rock: heavy : Optimized for orchestral for hard rock and metal music. Optimized CONTROL UP/DOWN DIAL Decrease the bass level. Increase the Treble Decrease the Treble level. level. Decrease the level of Decrease the level of the left the a After you have selected the proper mode by using the SELECTION Decrease the level of Decrease the level of (SEL) button, control the desired function by turning this dial within 6 seconds. After you finish selecting the front the modes, the unit speaker(s). speaker(s). right speaker(s). rear speaker(s). returns to the initial mode. ote The unit cannot adjust treble in the EQ on XDSS (Extreme the bass and mode. Dynamic Sound System) Press XDSS button to reinforce bass and surround effect. treble, b Operating display display in all modes: A numeric is converted by turning this dial. CD/MP3 CD Basic Operation CD/MP3 CD Basic Playback a disc with the labeled side up to start playback. disc is already inserted, press FUNCTION (FUNC) to Insert If a a select the CD/MP3 CD playing b Adjust time lights up, and are displayed. the volume Switching by turning between audio Press FUNCTION to (FUNC) the track number and elapsed CONTROL UP/DOWN dial. source stop CD/MP3 CD play and switch resume CD/MP3 CD ? The ? A disc . switches to radio at play beginning of last ejected when the unit is not on. reception. Pause. resume elapsed playing play, press again. time flash on and off. Skip to the next track with a short press (for less than 1 second). Each extra press skips forward one extra track. on the disc. Press and hold down until the start of the desired passage, then release it. (Only CD) Restart the track currently in play with a short press less than 1 Reverse on second). press skips backward one extra track. the disc. Press and hold down until the start of the desired passage, then release it. (Only CD) playback starts from the first track on the disc only when inserting a disc. In other cases (when switching from the radio operation or turning on the unit), the playback starts from the beginning of the track being played when the playback has stopped. can be inserted by putting it into the disc compartment pushing it lightly with fingers or pressing Suitable CD:This unit is 12 ? or CD, firmly depress automatically Each extra slot, and either ? To (for The disc is either inserted turned or Forward otes ? disc. To withdraw the Play button The track number and to radio play. Press again to track played. a The unit operation. Disc indicator Eject playback cm (5") This unit or disc can designed to be operated on a only. play a CD-R or CD-RW that contains audio titles MP3 files. 11 CD Advanced INTRO SCAN Operation MP3 file information Play Press twice the DISP button Press SCAN during playback. indicator lights up and the SCAN seconds of all the tracks on the disc - are otes in order. played When the desired track is SCAN file first 10 found, press ? If the tracks again. The unit returns to the normal playback. ? The repeat play is on the disc repeat play with the intro not are played repeatedly. cannot be scan or performed shuffle play. - MP3 playback. The information ID3 TAG(Title, Artist, Album) of the MP3 file the display window. selected, all the during If there is no will be shown in the information of the MP3 file, "NO ID3 TAG" indicator will be shown in the display window. MP3 TRACK -10/+10 SHUFFLE Track Number Playing The intro with the ? scan play repeat or cannot be shuffle performed play. After the first 10 seconds of all the tracks on the unit the disc are played repeats until the intro in during playback. SHF indicator lights up and the tracks the disc are played randomly. To cancel the shuffle play, press SHF again. on scan ? Press RPT during playback. RPT indicator lights up and the currently selected track is played repeatedly. To cancel the repeat play, press RPT again. 12 For your reference Loading When the disc is otes Play forward to the next 10th track. ?Auto order, stopped. REPEAT press the -10(D-) button to go back to the previous 10th track, and press +10(D+) button to go Durning playback, Press SHF Time otes ? Play ? The shuffle play cannot be performed with the intro play. If the repeat play is selected during the shuffle play, the shuffle play is canceled. is During the shuffle play, even If pressed repeatedly, the track currently in play is restarted. ejected by pressing during playback, it will be loaded automatically after 10 seconds unless you pull out the disc from the unit. Radio Operation PRESET FUNCTION CONTROL UP/DOWN SELECTION SEEK/TUNE(+/-) AS/PS POWER F3, c stations Presetting Up BAND be stored can on F1, F2, the preset Press BAND to select the desired band. If a CD is inserted in the d Repeat step pressing TUNE(+/-) ? AUTO Press Tuning the TUNE(+/-) unit, ? Tuning the TUNE(+/-) F1, F2, preset When 2 and 3 to a F3 have the pressed displayed. preset other can for FM. station is same on preset on the preset which another station band has already been preset, the previously preset station is more to presetting function is used automatically preset up to 6 stations for each band. a Press BAND to select the desired automatically Press and hold AS/PS preset scan) down for same range, up to 18 station station button of the buttons for The automatic b frequency ? than 2 seconds and then buttons repeatedly As be MANUAL than 1 otes button. than 1second. more band. preset by buttons for less for stations. ? Tune in the station to be 6) - Automatic Store Stations preset station preset station button is press FUNCTION (FUNC) button to select radio function. b (1 of the second. The number of the station buttons. a one buttons to 6 stations for each band MW Press store/ (auto more than 2 seconds. The scanning starts from the currently displayed frequency to higher frequencies and stops when stations have been receivable scanned preset frequencies or 6 the have been once. erased. until the desired station appears. 13 Radio Operation Listening otes ? The is ? ? presetting no is not if there performed a station to be tuned in. When the automatic is presetting performed, the previously preset stations are automatically erased. To stop the automatic presetting, press AS/PS (auto store/preset scan) again press any of the preset station buttons (1 6) or Seek to the radio Press any button on the unit. The radio (except to turn is displayed. If the unit is in the CD operation, press FUNCTION (FUNC) to select the radio operation. b frequency ) The seek function is used to search for the station ? ? band. - is To scan the preset stations Press AS/PS button Each (auto store/preset scan) briefly. 5 seconds in order. To or stop the scanning, press AS/PS again any of the preset station buttons (1-6). To tune in the preset stations Press BAND to select the desired band and press the desired buttons (1 6). preset station - The number of the preset station button is displayed and the preset station is received. . 14 c Tuning more the ? TUNE(+/-) buttons for than 2 seconds and then buttons preset station is tuned in for F1, F2, F3, MW displayed. repeatedly until the desired station appears. Press TUNE(+) to increase and TUNE(-) to decrease the frequency. To change the frequency rapidly, press and hold TUNE(+/-) down longer. Press automatically. TUNE(+/-) to start the seek function. Press BAND to select the desired The band indicator Tuning Press TUNE (+) to search for the higher frequencies and TUNE (-) for the lower frequencies. The seeking stops when the nearest station with good reception is tuned in. Press TUNE(+/-) repeatedly until desired station is received. RDS Operation About RDS ? (Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is capable of translating these signals and putting the information on the display. These codes contain the following informations. Program Service Name (PS), A list of program Type(PTY), Traffic Announcement(TA), Clock Time(CT), Radio Text(RT) Display Options The RDS a wide variety in addition to the initial call of information sign that indicate the station name, broadcast network or call letters. DISP enables you to data types in the sequence: displayed ? (CTtFREQUENCYtPTYtRTtPS) CT (Time controlled by the channel): Enable the unit to receive the actual time and show it on the ? ? recognition): on the display ? window. PS (Program Service name): The program title is displayed display window. display window. Display on the a NO ? (Program Identification) ? other programs to use their services like traffic announcement etc on EON-TA: With activated EON function when can be heard programs which do not broadcast such information by the regional program operation AF (Alternative Frequencies for the actual program) TP (Traffic Program Identification) TA (Traffic Announcement Identification) EON (Enhanced Other Networks) Information the PI Traffic programmes and announcements can be automatically received using the traffic announcements contains additional information for ? displayed in clear letters. Network Tracking reception uses TP/TA features. ? ? names frequencies at the area are broadcasting the same program and automatically changes to the best reception quality offering frequency without the need to interrupt the program by a seek function. message. PI The PS function allows station country, area and broadcast system. AF lists up which reception CLOCK, PTY NONE, RT NONE ? reception. the required for the not being transmitted, Window will show available for FM only and AF codes. The PI code identifies Some RDS stations may not choose to include some of these additional the RDS is to be ote ? ? text (Radio the The radio station's information is the front panel cycle through the various on RT selected mode is appears when a station is first tuned. In normal RDS operation the display will Pressing ? on otes features. If the data system is capable of transmitting (Program type recognition): The program type is shown display window. RDS RDS PTY listening selves. To do this, the tuner only for announcements, returning automatically afterwards to changes to another program ? the previous listened program. PTY program type selection enables to select the contents of programs who are supporting this service. 15 RDS Operation may be received at certain times. This can happen only in case of listening STATION NAME DISPLAY The station name automatically is when displayed a RDS station is received. programs; in mode 2 this malfunction! in the reception quality, using to regionalized codes. This is no you can same RDS AF/REG FUNCTION To s witch on or ? off the AF function press the or off the REG (AF: off): Network-Tracking station 'AF' button. To switch poor reception be used! function (Regional Network press the 'AF' button seconds. ? Mode 1 (AF: Tracking), longer than 2 on/REG: in certain local ? Mode 2 (AF: on): areas. on/REG: off): broadcasting regional program in the a different same will be no case alternative station network of can in modes 1 and 2 if a are a RDS station is tuned: A flashing of the AF indicator in the LCD display shows, the processor is still collecting the complete set of RDS data of this program. Whenever the flashing stops, all data are complete and the used by as far as they are can be supported the program. If AF functions wherever you continue to listen to the programme without are activated: When the reception quality drops, the tuner automatically changes to another drive, interruptions. procedure: If the reception quality drops too much without finding a better quality alternative frequency from the AF list, after a while the PI SEEK (Display: 'SEEK-PI'). The tuner is searching a station of the same program not regarding the AF list, which Network-Tracking reception operated better the PI and AF mean: function starts network, following procedures a PI SEEK Only In displayed. RDS functions of TCH-M550R Network-Tracking is activated. AF function changes between stations belonging to the broadcast network being received. A station name is deactivated. When you are driving in an area where RDS data is broadcasted by stations in Network-Tracking is activated. Regional mode is engaged (AF function changes between stations broadcasting the same program at all times). Regional mode shall be selected only in case of driving 16 Mode 3 (Network-Tracking), shortly on network, broadcasting station has the same PI code. RDS The same different Operation program can be received frequencies. Station C broadcasting frequency C. Station A on on on Station D broadcasting frequency A. on broadcasting frequency D. LOCAL/DX selection in EON-TA mode PROGRAM TYPE FUNCTION In the EON-TA mode, press the TA button for more than 2 seconds, causes only local and strong stations to be To select received. When TA button is a Press BAND to select in FM mode. b After, pressing PTY button one by one acti- more than 2 pressed seconds, it receives all tions, including distant and weak Station B broadcasting frequency B. on Station E broadcasting frequency E. on RDS data for preset buttons When a preset button is pressed, if the frequency is received with a sufficient quality, the receiver will tune to that frequency. When the reception quality is not sufficient for good reception, referring to its AF list, the receiver will change to a station of the same program which is broadcasting the best reception quality (a station broadcasting the same program contents may not be received when mode 2 (REG off) is selected and a regional program is selected). If a sufficient quality station cannot be found in the AF list, PI-seek tuning starts automatically. for sta- ones. vated music local c with REG (Only ? station with that When the AF button is more than 2 can being transmitted by broadcasting station. ? only hear Button the enabled, you regional programmes. When the REG function is enabled, you also listen to various programmes means of the alternative can ? by frequencies. The regional areas of function covers restricted transmission, hence it is advisable to distances. use it only of the PRESET (1-6) shortly. Each time this button pressed, the programs changes as seconds, the indication When the REG function is one off follow. countries) pressed for programmes ? selecting each mode. grouptspeech grouptsearch as Press is "REG" appears on the display and the radio activates the search for regional same out of button FUNCTION(Regional) available in certain type reception band, following procedure can be operated. It stations certain program the is recommended to set TA button to the position to receive local good sound quality. a for short 123456 123456 Button Music group Pop MtRock M Easy MtLight M. ClassicstOther M JazztCountry Nation MtOldies Folk M Speech group NewstAffairstInfo SporttEducatetDrama CulturetSciencetVa r ied WeathertFinancetChildren SocialtReligiontPhone In Tr ave l tLeisuretDocument 17 RDS Operation RDS MODE otes ? The Program Type data is a supplied program contents do not match with the selected program type this is no fault of the TCH-M550R processor but it is desired ? by the broadcast station. Some programs do not support the PTY function with data. If none of the support the selected program type, another program type can be selected the PTY function can selecting b After, pressing one activated SEL button as selecting one right by each mode. c Tu rn left or right control up/down dial to select the indicator. 3rd now. RETUNE L mode The waiting time for starting TA search PI search is selectable. Retune time is set to 90 seconds. or RETUNE S mode 4th TA ALARM PI SOUND RETUNE L BEEP 2ND TA SEEK PI MUTE RETUNE S BEEP ALL TA SEEK mode As long as there was no RDS data reception, the LCD display shows the actual reception frequency, After PS data was read from RDS signal, steadily the station name (PS) is displayed unless the AF function decides to receive frequency In that case, for 3 sec. The new reception frequency will shown automatically. If the situation described above is occurred, the receiver mutes the sound The waiting time for starting TA search PI search is selectable.Retune time is set to 30 seconds. or BEEP 2ND mode RECEPTION FREQUENCY DISPLAY 18 than 2 be switched off. another more mode. 2nd receivable stations in the FM band or Press the SEL button for seconds it is activated from the broadcast station. If the PI MUTE mode Adjustment . be When the newly tuned station does not receive TP information for 5 sec, the receiver retunes to next station which has no same PI as the last station's, but has the TP information. TA ALARM mode When a newly tuned station has no TP information for 5 sec, double beep sound is ouput. PI SOUND mode If the sound of a station with different PI is heard once in a while, the receiver mutes the sound after 1 second. The beep is only generated pressed long (1 sec) when key is BEEP ALL mode The beep pressed. is generated when every key is CD You Changer player(Optional) play CDs with this unit by connecting the optional compact disc changer. Make sure that the disc magazine loaded can with the discs is inserted into the connected Basic To start a b power of the car stereo. Slip a CD in the magazine with the sticker upwards. c Insert the magazine the play, display compact disc changer. on button To press the(B/X) pause, press it again. The disc and track number appears in the Press POWER button to turn Shuffle Play To play ? To play one disc randomly, button (The SHF indication ? To ? To cancel the press SHF is displayed). window. Repeat Play ? play one RPT button track (The repeatedly, press RPT indication is displayed). press SHF button for more than 1.5 seconds (The SHF indication is displayed). play all discs randomly, in the CD changer. d Press FUNCTION button to activate the CDC function, one of the disc will be played automatically, If changer is not connected, ? the CD the CDC To press RPT button for more than 1.5 seconds (The RPT indication is displayed). play all tracks repeatedly, function is not activated. e f Press another of buttons except ( ) play ? Press and hold the( during playback. The track is scanned forward or playback ) button by spiral in the resume at the desired location. play repeat play, again. ? ? ? If the repeat play is discs are The not cannot be performed play. If the repeat during the shuffle play, scan is selected the shuffle press RPT otes backward direction. Release the button to To cancel the button being played. 7 The shuffle with the intro to select of music from the disc again. otes ? Press D -/+ button to select the CD. one button repeat play, press SHF play is canceled. is During the shuffle play, even If pressed repeatedly, the track currently in play is restarted. selected, all the played repeatedly. repeat play with the intro cannot be scan or performed shuffle play. 19 CD Changer player(Optional) Intro Scan CD CHANGER DISPLAY Press SCAN button to playing only scan a CD by the first 10 seconds of each track. ? To disc intro scan, press SCAN button (The SCAN indication is play one displayed). ? To the first 10 seconds of each play track all the discs intro scan, press SCAN button for more then 1.5 on seconds (The displayed). SCAN indication is When the desired track is SCAN found, press again. The unit returns to the normal playback. ote The intro with the 20 Track Number scan play repeat or cannot be shuffle play. performed Disc Number CD CHANGER indicator ? CDC ? DSF : DISC SHUFFLE ? DRT : DISC REPEAT ? DSN : DISC SCAN : CD CHANGER Specifications GENERAL OutputPower........................50Wx4CH(Max.) PowerSource............................DC12-15V Speakerimpedance..............................4Ω GroundSystem.............................Negative .188 x 58 x 166 mm(Without Front Panel) Dimensions(W x H x D) NetWeight...................................1.3kg . . CD SELECTION FrequencyResponse.....................40Hz-20kHz S/NRatio....................................60dB Distortion.....................................0.5% ChannelSeparation(1kHz).......................50dB RADIO SELECTION FM FrequencyRange........................87.5-108MHz S/NRatio....................................55dB Distortion....................................0.5% ChannelSeparation............................25dB AM(MW) FrequencyRange........................522-1620kHz S/NRatio....................................45dB Distortion.....................................1.0% LW(Optional) FrequencyRange.........................144-281kHz S/NRatio....................................45dB Distortion.....................................1.0% otes ? The design and notice in the specification are subject to change course of product improvement. without 21 P/NO : 3834RR0023B
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project