LG | LS-D1860HS | LG LS-D1860HS Owner’s Manual

Room Air Conditioner
OWNER'S MANUAL
SPLIT TYPE ROOM AIR CONDITIONER
?
Please read
carefully and thoroughly this manual
operating this unit.
Contact the authorized SVC man for repair or
before
?
maintenance of this unit.
?
Contact the installer for installation of this unit.
Prior to
installation, this air-conditioning unit must be
approval by the utility service which
provides electricity (EN 60555-3 Norm).
submitted for
CONTENTS
PRODUCT COMPONENT IDENTIFICATION ...............................................3
(1)
Features ................................................................................................3
(2)
Indoor Unit, Outdoor Unit ......................................................................4
(3)
Name and Function-Remote Controller .................................................5
(4)
Remote Controller
Preparation
.............................................................6
AIR CONDITIONER OPERATION ................................................................7
(1) Operation
Mode ....................................................................................7
(2) Operation
Procedure .............................................................................7
(3) Sleep
Mode Auto-Control
Setting
........................................................13
(4) Airflow
Direction Procedure .................................................................14
(5) Setting
the Present Time .....................................................................15
(6)
Timer
Setting
(7) Operation
.......................................................................................16
Details ................................................................................18
FORCED OPERATION ................................................................................19
CARE AND MAINTENANCE ......................................................................20
OPERATION TIPS .......................................................................................22
CAUTION .....................................................................................................23
BEFORE CALLING FOR SERVICE ............................................................24
THIS IS NOT MALFUNCTION ....................................................................25
---2---
PRODUCT COMPONENT IDENTIFICATION
(1) Feature
GASoft
Dry Operation Mode(page 9)
This mode is
designed
to
dehumidify
without
overcooling.
GBNatural wind
by CHAOS logic(page 18)
This mode
automatically controls the indoor
speed and creates the feeling of a
pleasant breeze like a natural wind by
fan
GC
CHAOS
logic.
Auto
Operation(page 12)
In
selecting this mode of operation, the
setting temperature, indoor fan speed, and
the desired operation mode are automatically
set by Fuzzy rule on the basis of sensing the
room
temperature.
During Auto Operation, the vertical louver
swings up and down automatically in
according to 1/f rhythm. Pressing the Airflow
Direction Control Button will set the louvers
as
Wireless Remote Controller puts
all functions at your fingertips.
position. If you want to go on
swing of vertical the louver, press
the desired
with the 1/f
again
GDON/OFF Dual Timer
You
CAUTION
the Airflow Direction Control Button.
can
program the
room
of
?
Setting(page 17)
handling
Aim at the
the Remote Controller
signal receptor
conditioner
so as
to
air conditioner to
?
turn itself on or off so as to ensure you
maximum comfort when you return from
The remote control
a
being away.
?
the
on
room
signal
can
be received at
distance of up to about 7m.
Be
sure
that there
are no
obstructions
between the remote controller and the
GESleep
Mode Auto
A touch of the
Sleep
air
operate.
signal
receptor.
Control(page 13)
?
Mode Button
Do not
drop or throw the remote controller.
place the remote controller in a
location exposed to direct sunlight, or near
the heating unit, or any other heat source.
Do not
automatically controls the indoor fan speed,
and adjusts the setting temperature to create
a more comfortable sleep.
?
Block
a
with
curtain
a
strong light
or
over
the
signal receptor
etc. so as to
prevent the
abnomal
operation.
(ex:electronic quick start, ELBA,
fluorescent lamp)
---3---
inverter type
(2) Indoor Unit, Outdoor Unit
Indoor Unit
Air Intake Vent
(front panel)
Remote Controller
Storage
Air Outlet vent
Air Filter
Horizontal Airflow
Direction Louver
Vertical Airflow Direction Louver
(The air
starts.)
outlet vent opens when the
Air Filters
operation
(behind
front
panel)
Forced Operation Button
Used for operation when the remote controller cannot be
used.
Indoor unit controls
and indicators
Signal Receptor
the front panel
Pull the both ends of
front panel and hang
upward like below
Open
signals from the remote controller.
(Signal receiving sound:two short beeps or one long beep.)
picture.
Operation
Receives the
Indication
On
:
Lamps
Lights
up
during
the air conditioner
operation.
Sleep
Mode
:
Lights
up
during Sleep
Mode Auto
operation.
Timer
:
Deice Mode
:
Lights
Lights
(Heat
OUT
:
Lights
during
up
during Defrosting.
pump
up
model)
during
Outdoor Unit
(Rear)
(Side)
Air Intake Vents
Piping
Air Outlet Vent
Cooling
model: Room Air Conditioner for
Drain Hose
cooling
cooling
---4---
operation.
the compress
operation. (Cooling Model)
DOOR
Heat pump mdel: Room Air Conditioner for
timer
up
and
heating
(3) Name and Function-Remote Controller
GAOperation display
Remote Controller
the
Displays
Transmits the
GBStart/Stop
transmitter
Signal
Operation
signals
operation
to the room
conditions.
Button
starts when this button is
stops when the button is
pressed,
and
pressed again.
air conditioner.
GC
Operation
Mode Selection Button
Used to select the
?
?
?
1
?
operation
Cooling Operation Mode.
mode.
Soft
Dry Operation Mode.
Auto Operation.
Heating Operation (Heat Pump Only)
GDON Timer Button
ON
TIME
OFF
a.m.
a.m.
p.m.
p.m.
Used to set the time of
TIME
starting operation.
Hr.
GEOFF Timer Button
Used to set the time of
2
GF
3
Time
ON
67
9
GG Timer
the time.
Set Button
Used to set the timer when the desired time is
10
SET
obtained.
CANCEL
11
8
GH Timer
CANCEL Button
Used to cancel the timer
12
13
adjust
OFF
5
Button
Setting
Used to
4
stopping operation.
RESET
GISleep
Mode Auto Button
Used to set
GJ Air
Sleep
Mode Auto
Operation.
Circulation Button
Used to circulate
GKRoom
room
air without
cooling
Temperature Checking
Used to check the
GL
operation.
room
temperature.
Airflow Direction Control Button
Reset Button
---5---
heating.
Button
Used to set the desired airflow direction.
GM
or
(4) Remote Controller Preparation
How to mount onto
How to store the remote controller
Pull the both ends of front
1
panel slightly
1
to open.
Use the
screws
a
wall
to secure the holder to
the wall.
Confirm that the remote
Hang
2
the front
panel upward
and
keep
2
the remote controller.
(Remove
it when
reach
of unit.
signals can
signal receptor
To attach the remote controller to the
holder.
using.)
Press the left and the right side to close
the front panel. Press center slightly for
snap fit.
3
control
the
Snap
3
To
remove.
fit
How to insert batteries
1
Remove the
battery
cover
from the remote
RESET
?
controller.
Slide the
?
cover
to the arrow
according
Be
sure
that the
(+)
and
and
(-)
directions
are
RESET
?
correct.
?
Be
sure
rechargeable
dry
shape, dimensions,
performance.
cells in
Insert the two batteries.
?
use
differ from standard
direction.
2
Do not
batteries, such batteries
Romove the batteries from
the remote controller if the
that both batteries
are new.
air conditioner is not
to be used for some
3
Re-attach the
?
RESET
cover.
Slide it back into
position.
---6---
time.
going
long
AIR CONDITIONER OPERATION
(1) Operation Mode
Cooling
Mode
Cooling
Mode
Soft
Mode
Soft
Mode
Dry
Dry
Auto Mode
Auto Mode
(Cooling Model)
Heating
Mode
(Heat Pump Model)
(2) Operation Procedure
1st
Button
Start/Stop
ON
2nd
Operation
2
Button
Heat pump model
Cooling
Room
4th
Indoor Fan
Temperature Setting
model
3
4
Button
Speed
OFF
a.m.
p.m.
p.m.
TIME
Hr.
1
Mode Selection
3rd
TIME
a.m.
Selector
---7---
GA
Cooling Operation
LED
(
1
Mode
lamp ON)
Press the
Start/Stop
Button.
Beep,
beeps will sound
operation lamp will light up.
Two short
?
2
Select
Beep
and the
Cooling Operation.
Press the
Operation
Mode Selection Button.
Each time the button is
pressed,
the
operation
mode is shifted in the
arrow
direction.
Operation Display
Cooling Operation
3
Soft
Set the temperature
lower than the room
?
Set the fan
Operation
Heating Operation
(Heat pump model only)
The temperature can be set
a range of 18°C
30°C
within
temperature.
4
Auto
Dry Operation
1°C
~
To raise the
Temperature
To lower the
Temperature
speed.
Each time the button is
shifted.
---8---
by
.
?
Select the fan
?
The
speed in four steps
-low, medium, high, CHAOS.
display
speed.
pressed,
the fan
shows
speed
high
mode is
fan
GB
Soft
Dry Operation
Mode
This mode dehumidifies without
LED
(
1
overcooling.
lamp ON)
Press the
Start/Stop
Button.
Beep,
?
2
Select Soft
Press the
Beep
beeps will sound
operation lamp will light up.
Two short
and the
Dry Operation.
operation
Mode Selection Button.
Each time the button is
pressed,
the
operation
mode is shifted in the
arrow
direction.
Operation Display
Cooling Operation
3
Set the
Temperature
lower than the
Soft
room
Dry Operation
Auto
Operation
Heating Operation
(Heat pump model only)
temperature.
?
The temperature can be set
a range of 18°C~30°Cby
within
1°C.
4
To raise the
Temperature
To lower the
Temperature
During Dry Operation
The indoor fan
?
impossible
speed
is
automatically set to the low, so the shift of the indoor fan speed
already being set to the best speed for Dry Operatrion by Micom
because of
Control.
?
The indoor fan may be
stopped
not so as to be the room
---9---
overcooling.
is
GC
Air Circulation Mode
This mode is used to circulate
(
1
LED
room
air without
cooling
or
heating.
lamp ON)
Press the
Start/Stop
Button.
Beep,
?
2
3
Beep
beeps will sound
operation lamp will light up.
Two short
and the
Press Air Circulation Button.
Each time Indoor Fan
arrow
Speed
Selector is
pressed,
the fan
speed
mode is shifted in the
direction.
?
Fan
speed
is low.
?
Fan
speed
is medium.
?
Fan
speed
is
?
Natural Wind
high.
:
Fan
by
---10---
speed varies
logic.
chaos
like
a
natural wind
GD
Heating Operation
(
1
LED
Mode
(Heat pump model only)
lamp ON)
Press the
Start/Stop
Button.
Beep
Beep,
?
2
Select
beeps will sound
operation lamp will light up.
Two short
and the
Heating Operation.
Press the
Operation
Mode Selection Button.
Each time the button is
pressed,
the
operation
mode is shifted in the
arrow
direction.
Operation Display
Cooling Operation
Soft
Auto
Dry Operation
Operation
Heating Operation
(Heat pump
3
model
only)
Set the temperature.
?
The temperature can be set
a range of 16°C~30°Cby
within
1°C.
4
Set the fan
To raise the
Temperature
To lower the
Temperature
speed.
?
Each time the button is
shifted.
---11---
?
Select the fan
?
The
speed in four steps
-low, medium, high, CHAOS.
pressed,
display
the fan
shows
speed
high
fan
mode is
speed.
GE
Auto
LED
(
1
Operation
Mode
lamp ON)
Press the
Start/Stop
Button.
Beep,
?
2
Select Auto
Press the
Beep
beeps will sound
operation lamp will light up.
Two short
and the
Operation.
Operation
Mode Selection Button.
Each time the button is
pressed, operation
mode is shifed in the
arrow
direction.
Operation Display
Cooling Operation
Soft
Dry Operation
Auto
Heating Operation
Operation
(Heat
3
Set the temperature.
?
pump model
only)
Operation mode, set temperature and fan speed are automatically
by Fuzzy rule on the basis of sensing the room temperature.
If you want to change the set temperature, press room
temperature setting button.
The cooler or warmer you feel, the more times (up to two times)
set
?
?
?
you press the button.
Then the set temperature will be
changed automatically by
micom
control.
To raise the
To lower the
4
During
?
?
Auto
you feel too
or
cold)
warm or
hot)
speed during Auto Operation because of being
position by Fuzzy rule.
conditioner is not operating as desired, switch to cooling mode or other
impossible to
already set to the
room
Temperature. (When
feel too cool
Operation.
It is
If the
Temperature. (When you
air
switch the indoor fan
best
mode.
During Auto Operation, pressing the Air-flow direction control button makes vertical louver
swings up and down automatically according to 1/f rhythm. If you want to stop the 1/f swing
of the vertical louver, press again the Airflow Direction Control Button.
?
---12---
(3) Sleep Mode Auto
(
LED
-
Control
Setting
lamp ON)
Remote Controller
?
Sleep Mode will be operated at a low fan
speed(Cooling) or a med. fan speed(Heating)
for quiet sleeping.
The
Press the
Sleep
Mode Auto
Button.
Hr.
p.m.
Beep,
ON
OFF
SET
CANCEL
1. Press the
Sleep
Beep
Mode Auto Button and set
the time to turn off.
2. Check the
room
Sleep
3. The Timer is
RESET
Mode Auto LED of the
air conditioner
pressing
the
lights up.
programmed by 1 hour each
sleep mode auto button from
1 hour to 7 hours.
In
?
?
Cooling mode
The setting temperature will be automatically
raised by 1°C 30 minutes later and by 2°C 1
hour later for comfortable sleeping.
In order to cancel the
the
button several times until star
on
the
---13---
Sleep Mode, press
pictograph
operation display disappears.
(4) Airflow Direction Procedure
GA
Vertical Airflow Direction Control
Airflow Direction Control
The airflow direction
the
1Press
(Confirm
Start/Stop
the unit
on
be adjusted as desired by using the remote
yourself directly, such as after taking a bath.
can
when you want to cool
controller. This is effective
Caution
Button.
operation.)
?
Always
use
the remote controller to
airflow direction.
Manually moving
by hand could
airflow direction louver
operation
?
adjust
the
the vertical
cause
errors.
When air conditioner
operation
is
stopped,
the vertical airflow direction louver will close
the air outlet vent of
2
Press the Airflow Direction Control
Button and the vertical louvers
and down
3
Press
swing up
automatically.
again
the Airflow Direction Control
Button to set the vertical louver at the
desired airflow direction.
---14---
room
air conditioner.
GBHorizontal Airflow Direction Control
Adjust the
by hand.
?
horizontal airflow direction
by manually moving
the horizontal airflow direction louver
(5) Setting the Present Time
The present time can be set
the remote controller.
1
Press the
Start/Stop
the RESET Button
only
when
Button after
or
changing
pressing
pressing
batteries
the reset button
2
being
Press the Time SET Button.
SET
NOTE
:
Check
a.m.
and p.m. Indicator in
setting
---15---
when
Press the Time
for Remote Controller.
3
or
time.
replacing
Setting
batteries for
Button until
set the desired time.
(6) Timer Setting
LED
(
lamp ON)
Remote Controller
ON
1
ON Timer Button
or
OFF Timer
OFF
a.m.
p.m.
p.m.
TIME
Hr.
Heating
Button
Cooling
2
Time
3
Timer SET Button
4
Timer CANCEL Button
Setting
TIME
a.m.
1
Button
ON
OFF
SET
CANCEL
2
34
RESET
1
Press the ON Timer Button
or
OFF Timer
To cancel the
settings
Button.
Press the Timer Cancel button.
ON
OFF
(The
CANCEL
2
Change
the Timer
timer
lamp
on
The timer
conditioner and the
will be
will go
Setting
setting
displayed.
the air
display
out.)
and press the
Timer Set Button.
SET
If the
settings
are
cancelled
by
a
power
failure.
Press the
Start/Stop Button, and then set
again as desired time according
Setting Procedure.
the timer
Timer
---16---
to
Timer
Setting
Procedure
1
Confirm the present
2
Press ON Timer Button
ON
time.(Refer
or
to page
15)
OFF Timer Button.
?
Select
one
of the
following
four types of
operation.
OFF
OFF
TIME
Operation stops
a.m.
Delay
at OFF Timer
Setting.
OFF Timer
Delay
ON Timer
Delay OFF
ON
Operation
TIME
a.m.
ON
TIME
OFF
a.m.
a.m.
p.m.
p.m.
Operation stops at OFF
at ON Timer Setting.
TIME
and ON Timer
Delay ON
and OFF Timer
starts at ON Timer
Setting.
p.m.
ON
TIME
OFF
a.m.
a.m.
p.m.
p.m.
Operation
TIME
starts at ON Timer
OFF Timer
NOTE
:
Timer
Setting
Setting
Press the Time
Setting
set the desired time.
Button until
being
4
Check
a.m.
and p.m. Indicator in
Set the Timer SET Button.
SET
---17---
and stops at
Setting.
time.
3
and starts
setting
(7) Operation Details
?
Soft
Mode
Dry Operation
When the
room temperature is higher than the setting temperature, it operates cooling mode as the
setting temperature, the setting fan speed (if CHAOS mode, then med.), and then it will be switched
Soft Dry Operation Mode when the room temperature reaches the setting temperature.
In Soft
Dry Operation Mode,
the indoor fan
speed
is
automatically
switched to the low.
COOLING
ROOM
ROOM TEMP.
TEMP
+1°C
SOFT DRY
SET
TEMP
-0.5°C
SETINNG
INDOOR
FAN
FAN
SPEED
¡ª LOW COOL
¡ª LOW COOL
OPERATION
OPERATE
COMP.
OPERATE
OPERATE
FOR
FOR
10MINS
10MINS
STOP
STOP
OPERATING START
?
Natural wind
by
FOR
FOR
7 MINS
7 MINS
the CHAOS
For
more
fresh
OPERATION
logic
feeling
than other fan
speed mode,
press the Indoor Fan Speed Selector and set to CHAOS mode.
In this mode, the wind blows like natural breeze by automatically
changing
fan
speed according
---18---
to the CHAOS
logic.
to
FORCED OPERATION
Operation procedures
when the remote controller
can't be used.
Open the front panel upward
Operation Button.
and press the Forced
If you want to stop operation, press again. During Forced
operation, the operating conditions are automatically set
as the following:
Heat pump Model
Cooling
Operating
FAN
mode
Speed
Setting Temp.
Model
Room
Temp ≥ 24°C
21°C
Room
<
Soft
Cooling
Cooling
High
High
Soft
22°C
22°C
Air Intake
Temp ≤ 24°C
Room temp
Dry
Heating
Rule
High
Temperature.
24°C
Dry
<
Press the Forced
Operation
Button.
Forced
Operation
Button
Open the front
panel upward
Helpful
Airflow
Press the Forced
?
once
again
to
Operation Button
stop operation.
information
speed
and
cooling capacity
cooling capacity indicated in the specification is the
speed is set to high, and the capacity
lower at low or medium fan speed.
The
value when the fan
be
High
room
fan
speed
quickly.
will
is recommended when you wish to cool the
---19---
High
Speed
21°C
CARE AND MAINTENANCE
Before
performing any
maintenance procedure
Remove power
off.
plug
or
During
season
of the air filters.
Cleaning
turn the main switch
the
Recommended about
once
every two
weeks.
1
Remove the Air filters.
Take hold of the tab and
forward to
remove
pull slightly
the filter.
main switch
Don't wash with water.
2
There's the
danger
Clean.
?
of
To
remove
the dust adhered to the
filters, either use a vacuum
cleaner, or wash them in water and
electrical shock.
dry
?
in the shade.
Re-insert the filter into the
original
position.
Never
?
any of the followings:
Water hotter than 40°C.
Could
use
cause
If the Air Filters become
deformation and/or
?
discoloration.
?
Volatile substances.
Could
damage
the surfaces of the air
damaged.
filters from your air
conditioner dealer.
Cleaning
conditioner.
new
of the air conditioner and the
remote controller.
?
SINNER
Benzene
Purchase
S
COURING
CLBARGER
---20---
Wipe
with
a
soft, dry cloth.
At the end of the
1
Operate the air conditioner
following settings for 2 to 3
?
Type of operation
(refer to page 10)
This will
dry
:
At the start of the
season
at the
1
hours.
Remove
a
protective
season
cover
from the
outdoor unit.
Air circulation mode.
out the internal
mechanisms.
2
Remove the batteries from the Remote
Controller.
2
Clean the air filters, re-insert them, and
operate the air conditioner.
3
outlet and intake vents.
RESET
3
Cover the outdoor unit with
a
protective
cover.
Helpful
Be
sure
that
information
The air filters and your electiric bill.
If the air filters become
clogged with dust,
drop, and 6% of the
cooling capacity will
electricity used to operate
the
the air conditioner
will be wasted.
---21---
Wasted!
nothing
obstructs the air
OPERATION TIPS
Do not overcool the
This is not
room.
good for the
electricity.
Keep
blinds
or
curtains
Keep
the
closed.
uniform.
room
temperature
health
and wastes
Do not let direct sunshine
Adjust
enter the room when the air
horizontal airflow direction to
conditioner is in
ensure a
operation.
in the
the vertical and
uniform temperature
room.
4~6°C
Make
sure
that the doors
and windows
are
shut
Avoid
doors and
Clean the air filter
windows
to
keep
room.
as
much
as
possible
the cool air in the
Ventilate the
room
occasionally.
Blockages
opening
regularly.
tight.
in the air filter
reduce the airflow and lower
cooling
and
dehumidifying
effects. Clean at least
every two weeks.
---22---
once
Since windows
are
kept
closed, it is a good idea to
open them and ventilate the
room now
and then.
CAUTION
Do not
pull
out the power
cord.
Do not
use
the air
Do not block the air intake
conditioner for purposes
other than cooling or
Damage
to the cord may result
heating
the
room.
This
in serious electrical shock.
Do not
use
the air conditioner
for other purposes, such
as
drying clothes, preserving
foods, keeping animals, or
Select the most
appropriate
temperature.
and outlet vents.
causes
lowered
performance and irregular
operation. Do not insert sticks
or other objects into these
vents as it is dangerous to
cultivating vegetables.
touch the electric components
and the fan.
Do not
Avoid
apparatuses in the vicinity.
exposing the body
directly to a continuous
The air conditioner's
for
parts may melt if
excessive heat.
This is not
use
heating
unidirectional cool airflow
Take
care
to
temperature
adjust
the
to suit the
conditions. Rooms
occupied
elderly,
kept at
plastic
exposed to
by young infants, the
or invalids should be
an
long periods.
health.
appropriate temperature.
---23---
good
for your
BEFORE CALLING FOR SERVICE
Check the
before
following points
requesting repairs
or
service.... If the malfunction
persist, please
contact your dealer.
Cause
Faults
Does not operate.
Does not cool
or
?
heat
effectively.
?
?
Have you made
Is the air filter
The
room
The
room
has
a
peculiar
odor.
dirty?
was
operation
is
See air filter
first turned
?
Are the indoor unit's air inlet
?
Check that this is not
?
For
a
or
a
cleaning
instructions.
room
air
incorrectly?
or
damp
outlet vents obstructed?
smell exuded
cloth items in the
noise that sounds like water
-This is the sound of freon
noisy.
operation?
Allow time for it to cool down.
on.
Has the temperature been set
carpet, furniture
The air conditioner
mistake in timer
may have been very hot when the
conditioner
?
a
flowing
by
the walls,
room.
flowing.
inside the air conditioner
unit.
?
For
a
noise that sounds like the
into
atmosphere.
-This is the sound of the
processed
It
seems
leaking
that condensation is
?
from the air conditioner.
Air conditioner does not
operate
for about 3 minutes when
inside the air
Condensation
occurs
conditioner cools the
?
compressed
dehumidifying
conditioning
water
air
releasing
being
unit.
when the airflow from the air
warm room
air.
This is the protector of the mechanism.
?
Wait about three minutes and
?
Are the batteries
?
Are the batteries inserted in the
operation
will
begin.
restart.
Remote controller
faint,
or no
display
display
is
at all.
depleted?
opposite (+)
and
(-)
directions?
NOTE
SPLASH PROOF
:
The outdoor side of this
appliance
is SPLASH PROOF and the indoor side is
ordinary.
---24---
This is not malfunction
It may
happen
some
noise the
same as
indoor unit when the unit operate
which is due to the
by temperature
shrinkage
or
or
"Tig" "Tig"
from the
after the unit stop,
expansion
of
plastic body
fluctuation.
---25---
"Tig" "Tig"
P/NO.: 3828AR3988H
Printed in Korea
Download PDF