LG | LS-S0960HL | LG LS-S0960HL Owner’s Manual

K
M
Room Air Conditioner
OWNER'S MANUAL
ITAL NO
SPLIT TYPE ROOM AIR CONDITIONER
?
Please read
before
?
carefully and thoroughly
operating this unit.
Contact the authorized SVC
man
for
this manual
repair
or
maintenance of this unit.
?
Contact the installer for installation of this unit.
?
The
?
appliance
is not intended for
use
by young
infirm persons without supervision.
Young children should be supervised to
not
play
with the
ensure
children
that
or
they
do
ESPANOL
appliance.
MODELS: LS-P0760CL/LS-P0760HL
FRANCIS
LS-P0962CL/LS-P0962HL
LS-S0960CL/LS-S0960HL
LS-S1260CL/LS-S1260HL
ENGLISH.......................P.1
ITALIANO .....................P.29
ESPANOL......................P.57
FRANCAIS ....................P.85
DEUTSCH .....................P.113
GREEK ..........................P.141
Prior to
ENGLISH
-
-
-
-
-
-
P. 28
P. 56
P. 84
P. 112
P. 140
DEUTSCH
P. 168
installation, this air-conditioning unit must be
approval by the utility service which
provides electricity (EN 60555-3 Norm).
GRE K
submitted for
K
M
CONTENTS
SAFETY PRECAUTIONS...............................................................................3
Installation
precautions ...............................................................................3
Operation precautions ................................................................................4
PRODUCT COMPONENT IDENTIFICATION ...............................................7
(1)
(2)
(3)
(4)
Feature ..................................................................................................7
Indoor Unit, Outdoor Unit ......................................................................8
Name and Function-Remote Controller .................................................9
Remote Controller
Preparation
...........................................................10
AIR CONDITIONER OPERATION ...............................................................11
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Operation Mode ...................................................................................11
Operation Procedure ...........................................................................11
Sleep Mode Auto-Control Setting ........................................................17
Airflow Direction Procedure .................................................................18
Setting the Present Time .....................................................................19
Timer Setting .......................................................................................20
Operation Details ................................................................................22
FORCED OPERATION ................................................................................23
CARE AND MAINTENANCE ......................................................................24
OPERATION TIPS .......................................................................................26
BEFORE CALLING FOR SERVICE ............................................................27
NOTE ...........................................................................................................28
2
ENGLISH
SAFETY PRECAUTIONS
To
prevent injury
to the
user or
other
Incorrect
the
operation due to ignoring
following indications.
Warning
Caution
people
and
the
properties damage,
of instruction will
cause
harm
or
following instructions must be followed.
damage, the seriousness is classified by
: This indication shows the possibility of causing death
or
serious
: This indication shows the possibility of causing injury
or
damage
injury.
to
properties only.
The items to be followed
are
classified
by
the
following symbols.
Symbol(with
doing.
white
background)
denotes item that is PROHIBITED from
Symbol(with
white
background)
denotes item that is COMPULSORY to
be carried out.
WARNING
Do not install,
Improper
remove
installation will
authorized dealer
or
and reinstall the unit
cause
specialist
water
leakage,
by yourself.
electrical shock
or
fire. Please consult
for the installation work.
CAUTION
Please confirm the
This
room
following important points
when installation.
air conditioner must be earthed.
The
reverse
based
It may
cause
grounding
electrical shock if
is not
Do not install the unit at
of flammable gas may
perfect.
place
occur
where
leakage
and/or in
an
In
case
cycle system of the air conditioner
cooling type heat pump which
absorbs heated air from the outdoor unit and
it indoor.
Therefore if the outdoor unit is
low
of gas leaks and accumulates
of the unit, it may
drainage piping
properly.
is connected
water
furniture.
in the very
rapidly.
In this case,
operate
we
the air
conditioner.
The
temperature described
on an
on
the labels is
international standard
I.S.O.
INDOOR
If it is not connected
cause
off
recommend customers not to
measured based
Confirm
exposed
temperature, specifically below 0°C, the
heating capacity drops
surrounding
cause fire ignition.
is
the air
discharges
explosive atmosphere.
at the
on
perfectly, it may
leakage and dampen the
TEMP.
OUTDOOR
D.B
D.B
W.B
20±1°C
7±1°C
6±1°C
WARNING
?
Otherwise, it will
shock
or
generation
?
It will
or
cause
due to heat
?
cause
electrical
?
fire due to heat
This could
It will
electrical shock
cause
due to heat
or
fire
?
It will
cause
electrical shock
or
fire.
generation.
electrical shock.
electrical shock
or
fire
?
It may
cause
electrical shock.
?
generation.
damage
your health.
Since the fan
rotates
this may
cause an
speed,
?
If the unit continues to be
in
operated
?
If this is done in
abnormal condition, it may
cause a fire, trouble, etc. In this
cause a
case, consult your dealer.
leakage,
an
at high
injury.
correctly,
it may
fire, electric shock, injury
by dropping of the unit, water
etc. Consult your dealer.
CAUTION
?
?
It may
cause an
injury.
Since the fan rotates at
during operation,
injury.
high speed
it may
?
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
?
?
This could
?
injure
the
pet
or
plant.
An oxygen
Do not
cause an
electric shock.
occur.
this air conditioner to
preserve
It may
It may
use
may
precision devices, food,
animal, plants and art objects.
cause an
quality,
?
shortage
?
It may cause a fire
of the cabinet.
or
deformation
?
cause
deterioration of
etc.
It may cause
combustion.
imperfect
For installation
CAUTION
When the unit is not going
to be used for a long time,
turn off the breaker.
?
It may
cause an
injury.
Do not operate for a long time
in high humidity, e.g. leaving
a door or window open.
?
WARNING
Consult your dealer for
installing the air conditioner.
?
In the cooling mode, if it is
operated in a room with high
humidity (80%r.h. or more) for a
long time, water condensed in
the air conditioner may drop and
may wet and spoil furniture, etc.
CAUTION
Apply grounding.
?
Do not connect
to
Do not step on the
indoor/outdoor unit an do
not put anything on it.
?
It may
cause
dropping
or
an
falling
injury through
down.
It may case
down.
an
injury,
etc.
gas
pipe,
grounding wire
pipe,
ground wire of a
a
water
lightning rod or
telephone.
If a grounding is incorrect,
Do not step onto an unstable
bench when
attaching/detaching the panel.
?
a
cause an
it may
electric shock.
by
falling
Install
place
earth
leakage
depending on the
an
breaker
where the air
conditioner is to be
installed
?
If the earth
(humid place, etc.)
leakage
breaker is not installed,
it may cause an electric
shock
Do not install the unit where
flammable gas could leak.
Do not leave
on
stand which is
?
installation
?
If gas leaks and collect around the
unit, it may
damaged.
cause an
explosion.
The unit may drop or fall down
and cause an injury.
Drain water should be
fully
drained.
?
If the
drainage
route is
incomplete,
water may drop from the unit. It
may wet and spoil furniture.
6
ENGLISH
PRODUCT COMPONENT IDENTIFICATION
(1) Feature
GASoft
Dry Operation Mode(page
This mode is
to
designed
dehumidify
ENGLISH
13)
without
overcooling.
GBNatural wind
This mode
fan
by CHAOS logic(page 22)
automatically
controls the indoor
and creates the
speed
pleasant breeze
CHAOS
GCAuto
like
a
feeling
of
natural wind
a
by
logic.
Operation(page
15)
In selecting this mode of operation, the
setting temperature, indoor fan speed, and
the desired operation mode are automatically
set by Fuzzy rule on the basis of sensing the
room
temperature.
During Auto Operation, the vertical louver
swings up and down automatically in
according to 1/f rhythm. Pressing the Airflow
Wireless Remote Controller puts
all functions at your fingertips.
Direction Control Button will set the louvers
as
position. If you want to go on
swing of vertical the louver, press
the desired
with the 1/f
again
CAUTION
the Airflow Direction Control Button.
of
?
GDON/OFF Dual Timer
You
program the
turn itself on or off so
can
room
to ensure you
maximum comfort when you return from
Aim at the
?
?
being away.
so as
to
The remote control
a
as
the Remote Controller
signal receptor
conditioner
Setting(page 21)
air conditioner to
handling
the
on
room
air
operate.
signal
can
be received at
distance of up to about 7m.
Be
sure
that there
are no
obstructions
between the remote controller and the
signal
receptor.
GESleep
Mode Auto
A touch of the
Sleep
Control(page 17)
?
drop or throw the remote controller.
place the remote controller in a
location exposed to direct sunlight, or near
the heating unit, or any other heat source.
Do not
Mode Button
controls the indoor fan
automatically
speed,
and adjusts the setting temperature to create
a more comfortable sleep.
Do not
?
Block
a
with
curtain
a
strong light
or
over
the
signal receptor
etc. so as to
prevent the
abnormal
operation.
(ex:electronic quick start, ELBA,
fluorescent lamp)
inverter type
ENGLISH
7
Indoor Unit
Air Intake Vent
Power
(front panel)
supply
Cord
Remote Controller
Air Outlet Vent
Storage
(9K, 11K, 12K,
14K
models)
Horizontal Airflow
Direction Louver
Panel
Air Filters
Vertical Airflow Direction Louver
(The
air outlet vent opens when the
(behind
operation starts.)
Forced
Indoor unit controls
and indicators
front
(left
panel)
Operation Button
operation when the
Used for
Opening
right)
and
remote controller cannot be
used.
(When operation is stopped by the remote controller without
removing power plug, the room air conditioner consumes
approximately 2W of electricity.)
the front panel
Press the panel to open
(left and right side of
front panel) and open
the panel upward.
Open
Signal Receptor
Receives the signals from the remote controller.
(Signal receiving sound:two short beeps or one long beep.)
Operation
Indication
On
:
Lamps
Lights
up
during
the air conditioner
operation.
Sleep
Mode
:
Lights
up
during Sleep
Mode Auto
operation.
Timer
:
Lights
up
during
timer
Deice Mode
:
Lights
up
during
Deice Mode
(Blinks
on
and off
operation.
during
hot
operation.
start)
(Heat Pump Only)
OUT
DOOR
Outdoor Unit
:
Lights
up
during
the compressor
operation.(Cooling Only)
(Rear)
(Side)
Air Intake Vents
Air Outlet Vent
Piping
Drain Hose
Remote Controller
GAOperation display
Displays
Operation
Transmits the
to the room
signals
operation
GBStart/Stop
transmitter
Signal
the
conditions.
Button
starts when this button is
stops when the button is
air conditioner.
GC
pressed,
pressed again.
Mode Selection Button
Operation
Used to select the
?
?
?
+
?
LH
1
GDSleep
a.m.
p.m.
p.m.
Sleep
Mode Auto
Operation.
GEON Timer Button
OFF
a.m.
Mode Auto Button
Used to set
C
ON
operation mode.
Cooling Operation Mode.
Soft Dry Operation Mode.
Heating Operation(Heat Pump Only).
Auto Operation Mode.
Used to set the time of
starting operation.
Hr.
GF
Timer Set Button
Used to set the timer until the desired time is
obtained.
2
9
GGOFF Timer Button
Used to set the time of
6
5
ON
SET
GHTimer CANCEL Button
Used to cancel the timer
CANCEL
8
4
GIIndoor Fan
OFF
GJTime
7
11
13
12
GKRoom
Used to
15
ROOM AIR CONDITIONER
REMOTE CONTROL
Setting
Used to
GL
RESET
14
Speed
operation.
Selector
Used to select the desired fan
10
3
stopping operation.
Room
Button
adjust
the time.
Temperature Setting
adjust
the
room
room
Button
temperature.
Temperature Checking
Used to check the
GM
speed.
Button
temperature.
Airflow Direction Control Button
Used to set the desired airflow direction.
Heat pump model
Cooling
model
GN
Reset Button
GO
Fan
Operation
Button
(Cooling only)
Used to operate the indoor fan
only.
and
(4) Remote Controller Preparation
How to store the remote controller
How to mount onto
(9K, 11K, 12K, 14K Models)
All Models
Press the left and the
1
the front
right
panel upward.
side to open
1
Use the
screws
a
wall
to secure the holder to
the wall.
Confirm that the remote
control
signals
can
be
received from this
location.
Store the remote controller.
2
(Remove
it when
To attach the remote controller to the
holder.
using.)
Press the left and the
the front panel.
3
2
right
side to close
3
To
(1)
Hook
(2)
Press
remove.
(2)
(1)
Unhook
Pull
How to insert batteries
1
Remove the
cover
from the back of the
?
remote controller.
Slide the
?
cover
to the arrow
according
Be
sure
that the
(+)
and
and
(-)
directions
correct.
?
Be
sure
rechargeable
dry
shape, dimensions,
performance.
cells in
Insert the two batteries.
?
use
differ from standard
direction.
2
Do not
batteries, such batteries
are
?
Romove the batteries from
the remote controller if the
that both batteries
are new.
air conditioner is not
to be used for some
3
10
Re-attach the
?
cover.
Slide it back into
ENGLISH
position.
time.
going
long
AIR CONDITIONER OPERATION
Cooling
Mode
Soft
Dry
Mode
Heating
Mode
(Heat Pump Only)
Auto Mode
+
LH
C
ON
1st
Button
Start/Stop
OFF
a.m.
a.m.
p.m.
p.m.
Hr.
2nd
Operation
3rd
Room
Mode Selection
1
4
Button
ON
4th
SET
CANCEL
Temperature Setting
Button
Indoor Fan
OFF
2
Speed
3
Selection
Button
RESET
ROOM AIR CONDITIONER
REMOTE CONTROL
GA
Cooling Operation
LED
(
1
Mode
lamp ON)
Press the
Start/Stop
Button.
Beep,
beeps will sound
operation lamp will light up.
Two short
?
2
Select
Beep
and the
Cooling Operation.
Press the
Operation
Mode Selection Button.
Each time the button is
pressed,
the
operation
mode is shifted in the
arrow
direction.
Operation Display
°C
°C
Cooling Operation
3
Soft
°C
Heating Operation
(Heat pump model only)
Dry Operation
Set the temperature.
?
Auto
Operation
The temperature can be set
a range of 18°C
30°C
within
1°C
~
by
.
°C
4
Set the fan
Temperature
Temperature
speed.
?
Select the fan
-
?
°C
?
ENGLISH
speed in four steps
low, medium, high, CHAOS.
The
display
speed.
Each time the button is
shifted.
12
To raise the
To lower the
pressed,
shows
the fan
high
fan
speed
mode is
GBSoft
Dry Operation
Mode
This mode dehumidifies without
LED
(
1
ENGLISH
overcooling.
lamp ON)
Press the
Start/Stop
Button.
Beep,
?
2
Select Soft
Press the
Beep
beeps will sound
operation lamp will light up.
Two short
and the
Dry Operation.
operation
Mode Selection Button.
Each time the button is
pressed,
the
operation
mode is shifted in the
arrow
direction.
Operation Display
°C
°C
Cooling Operation
3
Set the
Temperature
lower than the
Soft
room
°C
Dry Operation Heating Operation
(Heat pump model only)
Auto
Operation
temperature.
?
The temperature can be set
a range of 18°C~30°Cby
within
1°C.
°C
To raise the
To lower the
4
Temperature
Temperature
During Dry Operation
?
The indoor fan
impossible
speed
is
because of
automatically set to the low, so the shift of the indoor fan speed
already being set to the best speed for Dry Operatrion by Micom
is
Control.
?
The indoor fan may be
stopped
not so as to be the room
overcooling.
ENGLISH
13
GC
Heating Operation
(
1
LED
Mode
lamp ON)
Press the
Start/Stop
Button.
Beep,
beeps will sound
operation lamp will light up.
Two short
?
2
Select
Beep
and the
Heating Operation.
Press the
Operation
Mode Selection Button.
Each time the button is
pressed, operation
mode is shifed in the
arrow
direction.
Operation Display
°C
Cooling Operation
°C
Soft
°C
(Heat
3
Auto
Heating Operation
Dry Operation
Set the temperature.
?
pump
Operation
only)
The temperature can be set
a range of 16°C~30°Cby
within
1°C.
°C
4
Set the fan
speed.
To raise the
Temperature
To lower the
Temperature
?
Select the fan
speed in four steps
low, medium, high, CHAOS.
-
?
The
display
speed.
shows
high
fan
°C
?
Each time the button is
shifted.
14
ENGLISH
pressed,
the fan
speed
mode is
GD
Auto
LED
(
1
Mode
Operation
lamp ON)
Press the
Start/Stop
Button.
Beep
Beep,
?
2
Select Auto
Press the
beeps will sound
operation lamp will light up.
Two short
and the
Operation.
Operation
Mode Selection Button.
Each time the button is
pressed,
the
operation
mode is shifted in the
arrow
direction.
Operation Display
°C
°C
Cooling Operation
Soft
Dry Operation
°C
Heating Operation
(Heat
3
pump
Auto
Operation
only)
Set the temperature.
?
The desired
operation
mode and
the
LH
setting temperature and the
speed are automatically set
by Fuzzy rule on the basis of
sensing the room temperature.
fan
To raise the
To lower the
4
During
?
?
?
Auto
Temperature
Temperature
Operation.
It is impossible to switch the indoor fan speed during Auto Operation because of being
already set to the best position by Fuzzy rule.
It is possible to press the room temperature setting button only two times so as to change
the automatically setting temperature.
If the room air conditioner is not operating as desired, switch to cooling mode or other
mode.
GE
Fan
(
1
Operation
LED
lamp ON)
Press the
Start/Stop
Button.
Beep,
?
2
3
Select Fan
Operation
Button.
Each time Indoor Fan
Speed
arrow
Selector is
pressed,
the fan
Beep
beeps will sound
operation lamp will light up.
Two short
speed
and the
mode is shifted in the
direction.
?
Fan
speed
is low.
?
Fan
speed
is medium.
?
Fan
speed
is
?
high.
by CHAOS logic:
speed is automatically changed
high to the low, or reversely by CHAOS
Natural wind
The indoor fan
from the
logic.
(
LED
lamp ON)
?
Remote Controller
Sleep Mode will be operated at a low fan
speed(Cooling) or a med. Fan speed prevent
the room from being too cold(Cooling) or too
hot(Heating) by automatically the setting
temperature being raised(Cooling) or being
decreased(Heating) for comfortable sleeping.
The
Press the
Sleep
Mode Auto
Button.
+
LH
°C
ON
OFF
a.m.
a.m.
p.m.
p.m.
Beep,
Hr.
1. Press the
Sleep
Beep
Mode Auto Button and set
the time to turn off.
ON
SET
CANCEL
2. Check the
room
Sleep
Mode Auto LED of the
air conditioner to
OFF
3. The Timer is
pressing
the
light up.
programmed by 1 hour each
sleep mode auto button from
1 hour to 7 hours.
4. The indoor fan is switched to
a
low
speed.
RESET
ROOM AIR CONDITIONER
REMOTE CONTROL
?
setting temperature will be automatically
by 1°C 30 minutes later and by 2°C 1
hour later(Cooling) or continued without any
change(Heating).
The
raised
CANCEL
?
So
as to cancel the Sleep Mode, press the
CANCEL button several times until disappear
the
Sleep Mode(Star pictograph).
(4) Airflow Direction Procedure
GA
Vertical Airflow Direction Control
Airflow Direction Control
The airflow direction
can
be
adjusted as desired by using
yourself directly, such as
effective when you want to cool
the remote controller. This is
after
the
1Press
(Confirm
2
taking
bath.
Start/Stop
the unit
on
Button.
operation.)
Press the Airflow Direction Control
Button for the vertical louver's
up and down
Remote Controller
a
swinging
automatically.
+
3
CHAOS
LH
TIME
OFF
a.m.
a.m.
p.m.
p.m.
again
the Airflow Direction Control
Button to set the vertical louver at the
desired airflow direction.
°C
ON
Press
TIME
Hr.
ON
SET
CANCEL
Airflow Direction Control Button
OFF
CAUTION
?
Always
use
the remote controller to
airflow direction.
Manually moving
by hand could
airflow direction louver
operation
RESET
?
ROOM AIR CONDITIONER
REMOTE CONTROL
ENGLISH
the
cause
errors.
When air conditioner
operation
is
stopped,
the vertical airflow direction louver will close
the air conditioner's air outlet vent.
18
adjust
the vertical
GBHorizontal Airflow Direction Control
Adjust the
by hand.
?
horizontal airflow direction
by manually moving
the horizontal airflow direction louver
(5) Setting the Present Time
The present time can be set
the remote controller.
1
Press the
Start/Stop
the RESET Button
or
only
when
Button after
changing
pressing
pressing
batteries
the reset button
2
or
when
Press the Time
being
replacing
Setting
batteries for
Button until
set the desired time.
for Remote Controller.
3
Press the Time SET Button.
SET
NOTE
:
Check
a.m.
and p.m. Indicator in
setting
time.
ENGLISH
19
ENGLISH
LED
(
lamp ON)
+
Remote Controller
LH
°C
ON
1
ON Timer Button
or
OFF Timer
OFF
a.m.
a.m.
p.m.
p.m.
Hr.
Button
2
Time
3
Timer SET Button
Setting
Button
13
ON
SET
CANCEL
4
OFF
4
Timer CANCEL Button
2
RESET
ROOM AIR CONDITIONER
REMOTE CONTROL
1
Press the ON Timer Button
or
OFF Timer
To cancel the
settings
Button.
Press the Timer Cancel button.
ON
OFF
The timer
setting will
displayed.
2
Change
the Timer
Setting
(The
CANCEL
timer
lamp
on
the air
conditioner and the
be
display
will go
out.)
and press the
Timer Set Button.
If the
SET
settings
are
cancelled
by
a
power
failure.
Press the
Start/Stop Button, and then set
again as desired time according
Setting Procedure.
the timer
Timer
to
Timer
Setting
Procedure
1
Confirm the present
2
Press ON Timer Button
time.(Refer page 19)
or
OFF Timer Button.
?
Select
one
of the
following
four types of
operation.
ON
OFF
?
Each time the button is
operation
pressed,
mode is shifted to the
the
arrow
direction.
Delay
OFF
OFF Timer
p.m.
Operation stops
Operation
Delay
ON
ON Timer
p.m.
Delay
Setting.
starts at ON Timer
Setting.
a.m.
OFF
and ON Timer
Delay
at OFF Timer
a.m.
ON
ON
Operation stops at OFF
at ON Timer Setting.
OFF
a.m.
a.m.
p.m.
p.m.
ON
OFF
a.m.
a.m.
p.m.
p.m.
Operation
Timer
starts at ON Timer
OFF Timer
Setting
Setting
and starts
and stops at
Setting.
and OFF Timer
NOTE
:
Check
a.m.
and p.m. Indicator in
time.
3
Press the Time
Setting
set the desired time.
Button until
being
4
Set the Timer SET Button.
SET
setting
?
Soft
Dry Operation
Mode
When the
room temperature is higher than the setting temperature, it operates cooling mode as the
setting temperature, the setting fan speed (if CHAOS mode, then med.), and then it will be switched
Soft Dry Operation Mode when the room temperature reaches the setting temperature.
In Soft Dry Operation Mode, the indoor fan speed is automatically switched to the low.
ROOM
COOLING
TEMP.
ROOM TEMP.
+1°C
SOFT DRY
SET
TEMP.
-0.5°C
SETTING
INDOOR
FAN
FAN
SPEED
¡ª LOW COOL
¡ª LOW COOL
OPERATION
OPERATION
COMP.
OPERATE
OPERATE
OPERATE
FOR
FOR
10MINS
10MINS
STOP
STOP
OPERATING START
?
Natural wind
by
FOR
FOR
3 MINS
7 MINS
the CHAOS
For
more
fresh
logic
feeling
than other fan
speed mode,
press the Indoor Fan Speed Selector and set to CHAOS mode.
In this mode, the wind blows like natural breeze by automatically fan
°C
speed switching
CHAOS logic.
from the
high
to
low,
or
reversely
in
according
to the
to
FORCED OPERATION
Operation procedures when
the remote controller
can't be used.
Open the front panel upward
Operation Button.
and press the Forced
If you want to stop operation, press again.
During Forced operation, the operating conditions
automatically
set as the
are
following:
Heat pump Model
Cooling
Operating
FAN
mode
Speed
Setting Temp.
Model
Room
Temp.
≥
24°C
24°C
>
Room
Soft
Cooling
Cooling
High
High
Soft
22°C
22°C
Air Intake
Temp. ≥ 21°C
Room
Dry
Temp.
Heating
Rule
High
Temperature
24°C
Dry
Press the Forced
Operation
Button.
Forced
Operation
Open the front
panel upward
Button
?
Press the Forced
once
Helpful
Airflow
again
to
information
speed
and
cooling capacity
cooling capacity indicated in the specification is the
speed is set to high, and the capacity
lower at low or medium fan speed.
The
value when the fan
be
High
room
fan
speed
quickly.
will
is recommended when you wish to cool the
High
Speed
<
Operation Button
stop operation.
21°C
CARE AND MAINTENANCE
Disconnect the power
plug
or
turn off the
Remove the air filters.
Take hold of the tab and
breaker.
remove
When the unit is to be
cleaned, switch off
plug or turn off
and disconnect the power
the breaker.
Since the fan rotates at
operation,
it may
high speed during
injury.
cause an
pull slightly forward to
the filter.
When the air filter is to be removed, do not
touch the metal parts of the indoor unit.
It may
cause an
injury.
Clean dirt from the air filter
vacuum
cleaner
or
using a
by washing with
water.
Clean
using
soft
If dirt is
cloth.
dry
of
If
conspicuous, wash with a solution
detergent in lukewarm water.
hot water (50°C or more) is used, it may
be deformed.
After
washing
with water,
dry
well in the
shade.
Never
?
use
any of the
followings:
Water hotter than 40°C.
Could
cause
Do not expose the air filter to direct
sunlight
or
heat from
deformation and/or
discoloration.
?
Volatile substances.
Could
damage
the surfaces of the air
conditioner.
Install the air filter.
S
INNER
Benzene
S
COURING
CLBARGER
Install it.
a
fire when
drying
it.
WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME.
When it is not
a
1
going to be
long time
used for
be used
Operate the air conditioner at the following
settings for 2 to 3 hours.
(Summer)
Type of operation : Fan Operation
ENGLISH
When the air conditioner is to
again
Clean the air filter and inatall it in the
1
indoor unit.
(Refer
to page 24 for
cleaning it.)
?
Clean it before
installing.
This will
2
dry
out the internal mechanisms.
Turn off the
breaker,
2
Check that the air inlet and outlet of the
indoor/outdoor unit
are
not blocked.
and disconnect the
plug.
CAUTION
Turn off the breaker when the air conditioner is
not
going
to be used for
a
Dirt may collect and may
3
long
time.
cause a
fire.
3
Check that the
is
connected
ground wire
correctly. It may
be connect
to the indoor unit side.
Remove the batteries from the remote
controller.
CAUTION
Apply grounding.
Do not connect
a grounding wire to a gas pipe,
pipe, lightning rod or ground wire of a
telephone. If a grounding is incorrect, it may
water
cause an
Helpful
electric shock.
information
The air filters and your electiric bill.
Wasted!
If the air filters become clogged with dust, the
cooling capacity will drop, and 6% of the
electricity used to operate the air conditioner
will be wasted.
ENGLISH
25
OPERATION TIPS
Do not overcool the
room.
Keep
blinds
or
curtains
Keep
the
closed.
This is not
good
for the
health and wastes
electricity.
room
temperature
uniform.
Do not let direct sunshine
Adjust
enter the room when the air
horizontal airflow direction
conditioner is in
to ensure a uniform
operation.
the vertical and
temperature in the
room.
4~6°C
Make
sure
that the doors
and windows
Avoid
opening
windows
as
possible
to
in the
are
shut
doors and
much
keep
as
the cool air
room.
Clean the air filter
ENGLISH
Ventilate the
room
occasionally.
Blockages
in the air filter
reduce the airflow and lower
cooling
and
dehumidifying
effects. Clean at least
every two weeks.
26
regularly.
tight.
once
Since windows
are
kept
closed, it is a good idea to
open them and ventilate the
room now
and then.
BEFORE CALLING FOR SERVICE
Check the
before
following points
requesting repairs
or
service.... If the malfunction
persist, please
contact your dealer.
Does not
The
operate.
room
peculiar
?
Have you made
mistake in timer
a
?
damp
Has the fuse blown
or
or
heat
in the
dirty?
cleaning
?
room may have
been very hot when the
room air conditioner
the
warm room
air.
Has the
temperature
been set
incorrectly?
Are the indoor unit's air
or
display
display
freon
This is the
For
flowing
?
Wait about three
outlet vents
?
inside the
Are the batteries
inserted in the
(+)
compressed
releasing into
atmosphere.
and
(-)
will
begin.
Crack sound is heard.
Are the batteries
noise that sounds
a
protector
of the mechanism.
no
depleted?
air conditioner unit.
?
?
flowing.
like the
on.
down.
inlet
?
the air conditioner cools
Remote controller
is faint, or
at all.
noisy.
noise that sounds
a
like water
The
first turned
For
is
-This is the sound of
Allow time for it to cool
?
occurs
minutes and
The air conditioner
instructions.
?
Condensation
when the airflow from
room.
operation
Is the air filter
See air filter
was
?
operate for about 3
minutes when restart.
not
operation
effectively.
?
a
by
Air conditioner does
tripped?
Does not cool
?
smell exuded
the walls, carpet,
furniture or cloth items
has the circuit breaker
been
It seems that
condensation is leaking
from the air conditioner.
a
Check that this is not
?
operation?
has
odor.
opposite
directions?
?
This sound is
generated by the
expansion/constriction
of the front panel, etc.
due to changes of
temperature.
air
-This is the sound of
the
dehumidifying
being processed
water
inside the air
obstructed?
conditioning
unit.
NOTE
SPLASH PROOF
:
The outdoor side of this
appliance
is SPLASH PROOF and the indoor side is
ordinary.
ENGLISH
27
ENGLISH
NOTE
Please remember to record the
?
Model Number
?
Serial Number
?
Dealer's Name
?
Date Purchased
following:
Download PDF

advertising