LG | B42AWYN7G5.ANWBLAP | LG B30AWY-7G5A Owner’s Manual

ENGLISH
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : CEILING CONCEALED DUCT
MODEL : AUSTRALIA HIGH STATIC DUCT
www.lg.com
P/NO : MFL41032507
2
TIPS FOR SAVING ENERGY
ENGLISH
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air
conditioner. You can use your air conditioner more efficiently by referring to the instructions
below:
• Do not cool excessively indoors. This may be harmful for your health and may consume more
electricity.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors or windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block
the air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
IMPORTANT SAFETY INSTRUCTIONS
3
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product
! WARNING
It can result in serious injury or death when the directions are ignored
! CAUTION
It can result in minor injury or product damage when the directions are ignored
! WARNING
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• The product shall be installed according to the Wiring regulations of the corresponding country.
• The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.
Installation
• Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.
There is risk of fire or electric shock.
• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service
Center. Do not disassemble or repair the product. There is risk of fire or electric shock.
• Always ground the product. There is risk of fire or electric shock.
• Install the panel and the cover of control box securely. There is risk of fire or electric shock.
• Always install a dedicated circuit and breaker. Improper wiring or installation may cause fire or
electric shock
• Use the correctly rated breaker or fuse. There is risk of fire or electric shock.
• Do not modify or extend the power cable. There is risk of fire or electric shock.
• Do not install, remove, or re-install the unit by yourself (customer). There is risk of fire, electric
shock, explosion, or injury.
• Be cautious when unpacking and installing the product. Sharp edges could cause injury. Be
especially careful of the case edges and the fins on the condenser and evaporator.
• For installation, always contact the dealer or an Authorized Service Center. There is risk of
fire, electric shock, explosion, or injury.
• Do not install the product on a defective installation stand. It may cause injury, accident, or
damage to the product.
• Be sure the installation area does not deteriorate with age. If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and personal injury.
• Do not let the air conditioner run for a long time when the humidity is very high and a door or
a window is left open. Moisture may condense and wet or damage furniture.
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
4
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
Operation
• Take care to ensure that power cable could not be pulled out or damaged during operation.
There is risk of fire or electric shock.
• Do not place anything on the power cable. There is risk of fire or electric shock.
• Do not plug or unplug the power supply plug during operation. There is risk of fire or electric
shock.
• Do not touch(operate) the product with wet hands. There is risk of fire or electrical shock.
• Do not place a heater or other appliances near the power cable. There is risk of fire and electric shock.
• Do not allow water to run into electric parts. There is risk of fire, failure of the product, or electric shock.
• Do not store or use flammable gas or combustibles near the product. There is risk of fire or
failure of product.
• Do not use the product in a tightly closed space for a long time. Oxygen deficiency could
occur.
• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the
product on. Do not use the telephone or turn switches on or off. There is risk of explosion or
fire
• If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect
the power supply cable. There is risk of electric shock or fire.
• Stop operation and close the window in storm or hurricane. If possible, remove the product
from the window before the hurricane arrives. There is risk of property damage, failure of
product, or electric shock.
• Do not open the inlet grill of the product during operation.(Do not touch the electrostatic filter,
if the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.
• When the product is soaked (flooded or submerged), contact an Authorized Service Center.
There is risk of fire or electric shock.
• Be cautious that water could not enter the product. There is risk of fire, electric shock, or
product damage.
• Ventilate the product from time to time when operating it together with a stove, etc. There is
risk of fire or electric shock.
• Turn the main power off when cleaning or maintaining the product. There is risk of electric
shock.
• When the product is not be used for a long time, disconnect the power supply plug or turn off
the breaker. There is risk of product damage or failure, or unintended operation.
• Take care to ensure that nobody could step on or fall onto the outdoor unit. This could result
in personal injury and product damage.
IMPORTANT SAFETY INSTRUCTIONS
5
• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant levels may cause failure of product.
• Install the drain hose to ensure that water is drained away properly. A bad connection may cause
water leakage.
• Keep level even when installing the product. To avoid vibration or water leakage.
• Do not install the product where the noise or hot air from the outdoor unit could damage the neighborhoods. It may cause a problem for your neighbors.
• Use two or more people to lift and transport the product. Avoid personal injury.
• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause
product malfunction or inefficient operation.
Operation
• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.) This could
harm to your health.
• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of property.
• Do not block the inlet or outlet of air flow. It may cause product failure.
• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc. There is risk of fire, electric
shock, or damage to the plastic parts of the product.
• Do not touch the metal parts of the product when removing the air filter. They are very sharp! There
is risk of personal injury.
• Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and failure of product.
• Always insert the filter securely. Clean the filter every two weeks or more often if necessary. A dirty
filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.
• Do not insert hands or other objects through the air inlet or outlet while the product is operated.
There are sharp and moving parts that could cause personal injury.
• Do not drink the water drained from the product. It is not sanitary and could cause serious health issues.
• Use a firm stool or ladder when cleaning or maintaining the product. Be careful and avoid personal
injury.
• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and
new batteries or different types of batteries. There is risk of fire or explosion
• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire. They may burn or
explode.
• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not
use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other
health hazards.
• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if
the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.
ENGLISH
! CAUTION
Installation
6
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
2
3
TIPS FOR SAVING
ENERGY
IMPORTANT SAFETY
INSTRUCTIONS
7
BEFORE USE
7
Preparing for operation
7
Usage
7
Cleaning and maintenance
7
Service
8
PRODUCT
INTRODUCTION
8
Name of Components
9
Deluxe wired remote controller
(PDRCUDC0)
10
RS2 Standard remote controller
(PQRCVSL0 / PQRCVSL0QW)
11
Monitoring – Demand Response
Mode(DRM)
11
It is the function to display Demand
Response Mode if power is restricted
for the product.
12 MAINTENANCE AND
SERVICE
12
Indoor Unit
12
Two wired remote controller
12
Call the service immediately in the
following situations
13
Operation Tips!
13
Filter
13
When the air conditioner is not
going....
14
Troubleshooting Tips! Save time and
money!
BEFORE USE
7
ENGLISH
BEFORE USE
Preparing for operation
• Contact an installation specialist for installation.
• Use a dedicated circuit.
Usage
• Being exposed to direct airflow for an extended period of time could be hazardous to your
health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
• Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves
or other heating devices.
• Do not use this air conditioner for non-specified special purposes (e.g. preserving precision devices, food, pets, plants, and art objects). Such usage could damage the items.
Cleaning and maintenance
• Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.
• Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to possible electric shock.
• When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is
accidentally triggered on while cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
OPERATING TEMPERATURE - Inverter Model
COOLING MODE
INDOOR[°C DB]
MIN.
18
OUTDOOR[°C DB]
MAX.
32
MIN.
-10
MAX.
48
HEATING MODE
INDOOR[°C DB]
MIN.
16
OUTDOOR[°C DB]
MAX.
30
MIN.
-15
MAX.
24
8
PRODUCT INTRODUCTION
ENGLISH
PRODUCT INTRODUCTION
Name of Components
1
4
Air intake
vents
6
2
5
Air outlet
vents
AUTO INDOOR
ZONE 1
ZONE 2
Wired Remote
Controller
REMO
ZONE 3
AUTO INDOOR
REMO
ZONE 2
ZONE 3
ZONE 1
ZONE 4
2TH
ZONE 4
3
7
8
1
4
6
5
AUTO INDOOR
ZONE 1
ZONE 2
AUTO INDOOR
ZONE 1
ZONE 2
2
REMO
ZONE 3
REMO
ZONE 3
ZONE 4
2TH
ZONE 4
3
7
8
1 : Indoor unit
2 : Outdoor unit
3 : Wired Remote Controller (Accessory)
4 : Air intake
5 : Air outlet
6 : Refrigerant pipe, Communication cable
7 : Drainage pipe
8 : Earth cable
*The shape of products can be chaged as the model capacity and type.
PRODUCT INTRODUCTION
9
ENGLISH
Deluxe wired remote controller (PDRCUDC0)
1
11
12
13
14
15
16
17
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
Operation display panel
Mode selection button
Fan speed button
Clock setting / Zone1 button
Simple timer / Zone2 button
Special function setting /Date selection /
Zone5 button
7 Sensor selection / Hour. Minute / Zone6
button
8 Timer mode button
9 Weekly timer1 / Zone3 button
18
10 Test run / On/Off button for reservation /
11
12
13
14
15
16
17
18
Zone7 button
Temperature control button
On/Off button
Room temperature button
Zone selection
Key lock button
Weekly timer2 / Zone4 button
Address / Cancel for reservation button
E.S.P / Setting for reservation / Zone8
button
※ Refer to remote controller manual for detail.
Each function will be shown on the display panel for three second or so when the initial
power is on.
The analog panel enables you to use the remote controller with a touch of your own finger
without pressing any extra button.
However, if you press more than one button at the same time, it may cause malfunction.
10 PRODUCT INTRODUCTION
ENGLISH
RS2 Standard remote controller (PQRCVSL0 / PQRCVSL0QW)
1 OPERATION INDICATION SCREEN
2 SET TEMPERATURE BUTTON
1
3 FAN SPEED BUTTON
10
9
8
7
11
12
13
4 ON/OFF BUTTON
2
3
5 OPRATION MODE SELECTION BUTTON
4
6 WIRELESS REMOTE CONTROLLER
RECEIVER
- Some products don't receive the wireless
signals.
5
6
14
7 AIR FLOW BUTTON
15
8 SUBFUNCTION BUTTON
9 FUNCTION SETTING BUTTON
10 VENTILATION BUTTON
11 RESERVATION
Please attach the inform label inside of the door.
Please choose proper language depend on your
country.
12 UP,DOWN,LEFT,RIGHT BUTTON
- To check the indoor temperature,
press
button.
13 ROOM TEMPERATURE BUTTON
14 SETTING/CANCEL BUTTON
15 EXIT BUTTON
※ Refer to remote controller manual for detail.
PRODUCT INTRODUCTION
It is the function to display Demand Response Mode if power is restricted for the product.
• This function works only when DRED (Demand response enabling device) is installed.
• It may decrease capacity of air conditioner in DRM
While Demand Response Mode operates, 'dr'
+ mode number blinks on the screen of the
cable remote control according to the Demand
Response Mode.
< Demand Response Mode table>
Mode
Display
DRM 1
dr 01
DRM 2
dr 02
DRM 3
dr 03
- When an error is detected for group control, DRM is not displayed.
- If DRM is displayed, the remaining time of the simple reservation will not be displayed.
ENGLISH
Monitoring – Demand Response Mode(DRM)
11
12 MAINTENANCE AND SERVICE
ENGLISH
MAINTENANCE AND SERVICE
Indoor Unit
Grille, Case and Remote Control
- Turn the system off before cleanining, To
clean, wipe with a soft, dry cloth. Do not use
bleach or abrasives.
!
NOTE
Supply power must be disconnected before cleaning the indoor unit.
Call the service immediately in
the following situations
- Anything abnormal such as burning smell,
loud noise etc. happen. Stop the unit and
turn the breaker off. Never try to repair by
yourself or restart the system in such cases.
- Main power cord is too hot or damaged.
- Error code is generated by self diagnosis.
- Water leaks from indoor unit.
- Any switch, breaker (safety, earth) or fuse
fails to work properly
User must carry routine checkup & cleaning to
avoid unit’s poor performance.
In case of special situation, the job must be
carried out by the only service person.
Air outlet vent
Two wired remote controller
- All wired remote controllers are displayed on
identical information.
- Last used wired romote controller has priority on product's movement.
MAINTENANCE AND SERVICE 13
Do not overcool the room.
This is not good for the health and wastes
electricity.
Keep blinds or curtains closed.
Do not let direct sunshine enter the room
when the air conditioner is in cooling operation.
Make sure that the doors
and windows are shut tight.
Avoid opening doors and windows as much as
possible to keep the air conditioned air in the
room.
Ventilate the room occasionally.
Since windows are kept closed, it is a good
idea to open them and ventilate the room from
time to time.
Filter
The units shipped without a filter and is the responsibility of the installer to secure a filter in
the return air ductwork.
Filter must always be used and must be kept
clean.
When filters become dirt laden, insufficient air
will be delivered by the blower, decreasing
your units efficiency and increasing operating
costs and wear-and-tear on the units and controls.
Filters should be checked monthly especially
since the unit may be used for both heating
and cooling
When the air conditioner is
not going....
When it is not going to be used for a
long time.
- Operate the air conditioner on Air circulation
mode for 2 to 3 hours.
This will dry out the internal parts.
- Turn off the circuit breaker.
! CAUTION
Turn off the circuit breaker when the air
conditioner is not going to be used for a
long time.
Dirt may collect and may cause a fire.
- Remove the batteries from the Remote
Controller.
When the air conditioner is to be
used again.
- Check that the air inlet and outlet of the indoor/outdoor unit are not blocked.
ENGLISH
Operation Tips!
14 MAINTENANCE AND SERVICE
ENGLISH
Troubleshooting Tips! Save time and money!
Check the following points before requesting repairs or service.... If the malfunction persist,
please contact your dealer.
The air conditioner
does not operate.
- Have you made a
mistake in timer operation?
- On first starting, the
indoor unit operates
in fifteen seconds.
- Has the fuse blown
or has the circuit
breaker been
tripped?
The room has a peculiar odor.
- Check that this is not
a damp smell exuded by the walls,
carpet, furniture or
cloth items in the
room.
It seems that condensation is leaking from
the air conditioner.
- Condensation occurs
when the airflow
from the air conditioner cools the
warm room air.
Does not cool or heat
effectively.
- Is the air filter dirty?
See air filter cleaning
instructions.
- The room may have
been very hot when
the room air conditioner was first
turned on. Allow
time for it to cool
down.
- Has the temperature
been set incorrectly?
- Are the indoor unit's
air inlet or outlet
vents obstructed?
The air conditioner op- Crack sound is heard.
eration is noisy.
- This sound is gener- For a noise that
ated by the expansounds like water
sion/contraction of
flowing.
the inlet grille, etc.
due to changes of
* This is the sound
temperature.
of freon flowing inside the air conditioner unit.
- For a noise that
sounds like the compressed air releasing
into atmosphere.
* This is the sound of
the dehumidifying
water being
processed inside the
air conditioning unit.
Air conditioner does
not operate for about
3 minutes when
restart.
- This is the protector
of the mechanism.
- Wait about three
minutes and operation will begin.
Remote control display is faint, or no display at all.
- Has the circuit
breaker been
tripped?
Download PDF