LG | 21FS4RLX | LG 21FS4RLX Owner’s Manual

COLOUR TELEVISION
OWNER'S MANUAL
Before
connecting, operating or adjusting
product, please read this instruction
booklet carefully and completely.
this
3
Year
Guarantee
21FS4RLX-TV
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On screen language selection (option)
8
On
9
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning / Fine
10
Setting
Tuning
Programme edit / Favourite programme
Calling the programme table
Picture
PSM
16
Sound
18
adjustment
(Picture Status Memory) / XD
Eye (option) / Picture adjustment
adjustment
(Sound Status Memory)
SSM
Turbo sound selection
Sound
adjustment
Sound
output selection / Stereo/Dual reception
NICAM
/ X-WAVE
(Wireless Sound) (option)
reception (option)
Time
setting
Setting the
Auto sleep
21
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching
Child lock / Degaussing
Games (option) / Sleep timer
22
(option)
PIP
25
operation (option)
Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change
On and off /
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
26
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
29
Euro scart socket
Component
Troubleshooting
2
(option)
(option)
in sockets
check list
Back
cover
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
place anything containing liquid on top
fire or could give an electric shock.
of the set, this may
cause a
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
1
10
Remote control handset
2
Before you use the remote control
teries. See the next page.
1.
11
3
2.
PR
VOL
4
OK
PR
13
3.
VOL
14
4.
standby
NUMBER BUTTONS
Switches the set on from
standby
MENU
selects
on
or
off to
or
directly
standby.
select
a
a menu.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
automatically.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
programmes
F / G
12
OK
7
accepts your selection
9
8
(With
TELETEXT /
PIP)
PR
VOL
OK
Q.VIEW
PR
VOL
LIST
5
UPDATE/
(With
HOLD/
TELETEXT / Without
PIP)
or
displays
the current mode.
5.
TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
6.
SLEEP
sets the
7.
4
from
scans
6
5
POWER
switches the set
handset, please install the bat-
sleep
timer.
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
number.
Location and function of controls
8.
FAVOURITE
9.
selects
a
favorite programme.
EYE/ *
(option)
1
switches the eye function
on or
10
off.
10. MUTE
switches the sound
on or
2
off.
11. TV/AV
selects TV or AV mode.
switches the set on from
3
standby.
mode(option).
exits the Teletext
11
PR
12. I/II/ *
selects the
language during dual language
output (option).
broadcast.
VOL
4
selects the sound
Q.VIEW
13. Q.VIEW
returns
(or SWAP)
to the previously
13
viewed programme.
*
:
PR
VOL
LIST
14
9
8
6
14. LIST
(or INPUT)
displays the programme
OK
table.
12
No function
COLOURED BUTTONS
TELETEXT
models)
or
:
These buttons
are
used for teletext
(Without
(only
TELETEXT /
PIP)
programme edit.
Battery installation
The remote control handset is
powered by
two AAA
type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the
polarity symbols (
+
and
-
)
marked inside the
compartment.
PR
VOL
OK
VOL
PR
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
7
(With
PIP / Without
TELETEXT)
5
Location and function of controls
Front
panel
21FS4 series
21FD7 series
5
4
12345
123
21FS2 series
21FB3 series
VIDEO
ON/OFF
MENU OK
VOL
PR
L/MONO AUDIO R
VIDEO AUDIO
AV IN2
1234
12345
5
6
6
21FE6 series
21FX5 series
1
7
235
4
123
4
5
21FX4 series
21FC1 series
MENU
OK
VOL
PR
1234
12345
21FA3 series
5
7
21FD1/4 series
MENU
MENU
OK
VOL
OK
PR
VOL
PR
ON/OFF
L/MONO
AV IN2
1
2
34
5
6
1234
21FB5 series
21FB9 series
VIDEO
MENU
5
OK
VOL
L
AUDIO
R
PR
ON/OFF
AV IN2
1
6
2345
6
7
1234
5
7
Location and function of controls
1.
21FS6 series
MAIN POWER
(ON/OFF)
switches the set
2.
4
off.
POWER/STANDBY INDICATOR
illuminates
123
on or
brightly
when the set is in
standby
mode.
5
dims when the set is switched
on.
21CC2 series
3.
REMOTE CONTROL SENSOR
Note
123
4
the
Only use
:
handset.
(When
supplied
you
able to
function.)
MENU
(option)
selects
a menu.
use
remote control
others, they won't be
5
4.
15Q9 series
5.
MENU
VOL
OK
PR
POWER
OK
(option)
accepts your selection
or
displays
the current
mode.
F / G
4
12 3
5
7
(Volume Up/Down) (option)
adjusts
the volume.
adjusts menu settings.
D / E (Programme Up/Down) (option)
selects
a
programme
switches the set
6.
on
or a menu
from
item.
standby.
AUDIO
(or AUDIO-L/R)/VIDEO
(AV IN2) (option)
IN SOCKETS
Connect the audio/video out sockets of external
equipment
Side
to these sockets.
panel
7.
EYE
(option)
adjusts picture according
6
VIDEOL/MN
6
6
AUDIO
Note
:
or
R
Shown is
side
a
panel.
surrounding
simplified representation
6
on
of front
What is shown here may be
somewhat different from your set
supplied
6
to the
conditions.
your
or can
not be
area.
6
7
Basic
operation
On and off
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E TV/AV
or NUMBER buttons on the remote control handset to switch it
1.
2.
,
on
fully.
Press the POWER button
3.
The set reverts to
the remote control handset.
on
mode.
standby
Press the main power button
4.
again
to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the D / E
or
NUMBER
buttons.
Volume
adjustment
Press the F / G button to
adjust
the volume.
Q.VIEW (or SWAP)
Press the Q.View
were
you
(or SWAP)
watching.
button to view the last programme
Mute function
Press the MUTE button. The sound is switched off and the
display
W
appears.
You can cancel it
On
The
screen
menu
the
MUTE,
F /
G, I/II/ * (option), button.
language selection(option)
can
First select your
1.
by pressing
be
displayed
language.
on
the
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
Press the G button to select
3.
Press the G button and then D / E button to select your desired
Language.
language.
All the
on screen
Press the OK
4.
8
Repeatedly
viewing.
or
displays
will appear in the selected
F button to select the
Special
language.
menu.
press the MENU button to return to normal TV
On
The
an
dialogue
operator
also
screen menus
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
menu.
Change the setting of an item in the sub or pull-down menu with
theF/Gor D / E
You can move to the higher level menu with the OK or F button and to move to the lower level menu press the G button.
Note :
a.
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c.
In some models, Game, Booster or Degauss will not display.
d.
In some models, the Language, X-WAVE will not display.
4.
.
Auto programme
Station
BG
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
{
{
I
ProgrammeOedit
FavouriteOprogramme
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
PR
()O}{OOKOMENU
()O}{OOKOMENU
Station
VOL
menu
OK
VOL
Manual programme
Picture
PSM
{
XD
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{OOKOMENU
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
2
PR
{
()O}{OOKOMENU
Picture
menu
Programme
Sound
edit
SSM
{
O0OOCO03 OOO5OOSO69
TurbooSound
{
O1OOCO03OOO6OOSO17
AVL
{
O2OOCO12OOO7OOSO22
Balance
{
O3OOSO66OOO8OOCO09
X-WAVE
{
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{OOKOMENU
()O}{OOKOMENU
Sound
menu
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{OOKOMENU
Time
menu
Special
Language
Input
{
Childolock
{
Degauss
{
Game
{
{
()O}{OOKOMENU
Special
menu
TV programme
9
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
()O}{OOKOMENU
can
be stored.
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
Auto programme
System
StorageOfrom
{
{
I
NormalOsearch
{
DK
TurboOsearch
{
M
BG
()O}{OOKOMENU
3.
4.
PR
VOL
OK
PR
VOL
5.
6.
7.
8.
9.
Press the G button to display the Auto programme menu.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
Option: In some models, you can only select Start.
Note :
a.
Turbo search is faster than Normal search and in some models, these searches will automatically store all receivable stations.
Normal search
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
MENU
b.
{
OOCO01O(BG)
73 6 %
MENU
If the programmed station has poor quality and sound, select
the system again in the Manual programme menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
10
Setting up
Manual programme
TV stations
Station
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
programme.
3.
Press the
G
button to
display
the Manual programme
menu.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
2
{
()O}{OOKOMENU
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M : (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0'(or
'00') in front of it, i.e. '05'(or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
PR
VOL
OK
VOL
PR
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
{
{{{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
11
TV stations
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
Press the D / E button to select Name.
3.
Press the G button
4.
Press the D button. You
{
and the
()O}{OOKOMENU
alphabet
on
the Name
can use a
5.
6.
your choice of the second
Press the OK button.
Repeatedly
viewing.
pressing
(option)
models, Booster is
If the
can
perform
reception
menu.
+, -, the numeric 0 to 9
opposite
direction.
the F / G button and then take
character, and
so on.
press the MENU button to return to normal TV
In
Booster
select in the
can
Booster
some
blank,
A to Z.
With the E button you
Select the position by
7.
pull-down
1 to 3.
an
function.
optional
Only
a
set with
this function.
is poor at the
fringe
of the TV
area
signal,
select
Booster to On.
2.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
3.
Press the G button.
1
PR
VOL
OK
PR
4.
Repeat
Press the D / E button to select On
down
VOL
5.
Press the OK button.
6.
Repeatedly
viewing.
Fine
2.
Off
on
the Booster
pull-
press the MENU button to return to normal TV
tuning
Normally
1
or
menu.
fine
tuning
is
only
necessary if
reception
Repeat the 'Manual programme tuning'
Press the D / E button to select Fine.
steps
is poor.
1 to 3.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
{
{{{
Stored
3.
Press the G button.
4.
Press the F / G button to fine tune for the best
sound on the Fine pull-down menu.
Press the OK button.
5.
6.
12
picture
and
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
Setting up
Programme
TV stations
Station
edit
This function enables you to delete or skip the stored programmes.
You can also move some stations to other programme numbers or
insert a blank station data into the selected programme number.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E
button
Programme edit.
to
3.
Press the G button to
menu.
1.
display
Programme
the
Programme edit
select
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{OOKOMENU
Deleting
1.
2.
a
programme
programme to be deleted with the D / E orF/Gbutton.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Select
Copying
1.
2.
a
a
programme
programme to be copied with the D / E orF/Gbutton.
Press the GREEN button.
All the following programmes are shifted down one position.
Select
a
PR
VOL
Moving
1.
2.
3.
4.
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
the D / E or F / G button.
Press the YELLOW button again to release this function.
Programme
OK
VOL
PR
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOMENU
1.
a programme number
Select a programme number to be
button.
2.
Press the BLUE button. The
Skipping
3.
skipped
with the D / E
or
F / G
skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly
tons
or
Repeatedly
enter the programme number with the NUMBER butselect it in the programme edit or table menu.
press the MENU button to return to normal TV
viewing.
13
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
()O}{OOKOMENU
TV stations
Favourite programme
{
{
This function lets you select your favourite programmes
directly.
1.
Press the MENU button to select the Station
2.
Press the G button and then D / E button to select Favourite
menu.
programme.
3.
Press the G button to
display the Favourite programme
menu.
Favourite programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
56n Ca 05
{
}{O0_9O()OOKOMENU
4.
5.
PR
VOL
OK
PR
VOL
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0'(or
'00') in front of it, i.e. '05'(or '005') for 5.
--
6.
To store another programme, repeat
You can store up to 8 programmes.
7.
Press the OK button.
8.
Repeatedly
viewing.
Repeatedly
4 and 5.
press the MENU button to return to normal TV
press the FAVOURITE button to select stored favourite
programmes.
14
steps
Setting up
Calling
TV stations
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
Displaying programme table
Press the LIST (or INPUT) button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Station
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()}{OOKOMENU
Note
a.
:
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
Selecting
Select
a
programme in the programme table
programme with the D / E
Then press the OK button.
a
or F
PR
/ G button.
VOL
The set switches to the chosen programme number.
OK
VOL
PR
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200)programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
There
Press the LIST
(or INPUT)
button to return to normal TV
viewing.
15
Picture
Picture
adjustment
Note: Picture
PSM
{
XD
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
menu
options
are
not available for the RGB
input
source.
PSM (Picture Status
Memory)
1.
Press the MENU button and then D / E button to select the
Picture menu.
2.
Press the G button to select PSM.
Press the G button and then D / E button to select
()O}{OOKOMENU
3.
a
picture
Picture
PSM
{
Dynamic
XD
{
Standard
Contrast
{
Mild
Brightness
{
Game
Colour
{
User
Sharpness
{
()O}OOKOMENU
the PSM pull-down
setting
Press the OK or F button.
on
4.
5.
Repeatedly
viewing.
menu.
press the MENU button to return to normal TV
The
picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be
changed.
PR
VOL
OK
PR
VOL
XD
You
can enjoy the vivid and hi-definition picture
Digital Reality processor technology.
1.
with LG's excellent
Press the MENU button and then D / E button to select the
Picture menu.
Picture
PSM
XD
{
{
On
Contrast
{
Off
Brightness
{
Colour
{
Sharpness
{
()O}{OOKOMENU
2.
3.
Press the G button and then D / E button to select XD.
Press the G button and then D / E button to select On
on
16
the XD
pull-down
or
Off
menu.
or F button.
press the MENU button to return to normal TV
4.
Press the OK
5.
Repeatedly
viewing.
Picture
adjustment
Eye (option)
is
Eye
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
set will automatically adjust the picture accordsurrounding conditions. This will enable you to enjoy the
suitable picture according to the surroundings.
some
ing
models, the
to the
most
Press the EYE/ * button to switch the eye function
on or
off.
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
display
display
changes.
but the
condition
in
in green does not appear continuappears each time the picture
yellow
Note :
EYE function is not available for RGB
PR
input
source.
VOL
Picture
You
can
ness
1.
2.
3.
adjustment
OK
VOL
PR
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
Press the G button and then F / G button to make appropriate
Picture
PSM
{
XD
Contrast
{
{
Brightness
{
Colour
{
Sharpness
{
100
()O}{OOKOMENU
the each sub menu.
Press the OK button to store it for the
adjustments
4.
on
picture User.
Contrast
80
}{O()OOKOMENU
5.
Repeatedly
viewing.
press the MENU button to return to normal TV
17
Sound
Sound
SSM
{
TurbooSound
{
AVL
{
Balance
{
X-WAVE
{
SSM
(Sound Status Memory)
You
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
can
Sports
1.
2.
()O}{OOKOMENU
adjustment
3.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Sound
Flat
SSM
{
Turbo0Sound
{
AVL
{
Music
Movie
Balance
{
Sports
X-WAVE
{
User
()O}OOKOMENU
Sound Frequency Adjustment
a. Press the G button in User to
display
the User sub
menu.
0.1O0.5O1.5O5.0O10OkHz
()O}{OOKOMENU
PR
VOL
OK
PR
b. Select a sound band by pressing the F / G button.
Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
c.
VOL
Repeatedly
press the MENU button to return to normal TV
viewing.
The sound Flat, Music, Movie and Sports are programmed for
good sound reproduction at the factory and cannot be changed.
Turbo sound selection
When this function is on, the sound will be
amplified than normal sound.
1.
2.
more
emphasized
and
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select Turbo
Sound
Sound
SSM
{
Turbo0Sound
{
On
AVL
{
Off
Balance
{
X-WAVE
{
()O}OOKOMENU
3.
4.
5.
Press the G button and then D / E button to select On or off
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
18
Sound
adjustment
Sound adjustment
Sound
SSM
{
Volume Leveler), AVL automatlevel even if you change programmes. The Turbo sound creates an all around sound as in a
concert hall.
TurbooSound
{
AVL
{
Balance
{
X-WAVE
{
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL or Balance.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
()O}{OOKOMENU
You
adjust balance, AVL (Auto
ically keeps on an equal volume
1.
2.
3.
4.
5.
can
viewing.
X-WAVE
You
1.
2.
3.
can
(Wireless Sound) (option)
also listen to the sound
through
the FM receiver.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to select Set
Frequency.
4.
5.
Press the G button to tune in
a frequency on the X-wave menu.
Usethenumber0to9orpresstheF/Gbuttontomatchthe
TV's frequency and the FM receiver's.
PR
VOL
OK
VOL
Sound
SSM
{
Turbo0Sound
{
AVL
{
Balance
{
X-WAVE
{
SetOFreq
Off
()O}{OOKOMENU
PR
X-WAVE
88MHz
107MHz
{
FM95.0MHz
}{0-9OOKOMENU
Note:
a. If the reception is poor or weak, select a different frequency.
b. For best results, there should be no more than 5m (16.4ft)
between the TV and FM Receiver.
c.
In certain areas, the FM transmitter ability may be weak, such
as near a broadcast tower.
d. The reception sensitivity may depend on the kinds of receiver
(FM radio).
19
Sound
Sound
adjustment
output selection
In AV mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II/ * button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right
loud-speakers.
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II/ *
button twice. In mono reception the
depth of sound is improved. To switch back to stereo, press the
I/II/ * button twice again.
selection for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/ *
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeak-
Language
If
a
ers.
DUAL II sends the
secondary
broadcast
language
to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast by pressing the I/II/ * button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
20
Time
Setting
1.
2.
3.
Setting
the clock
Time
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
{
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
-i-o:o-i-
()O}{OOKOMENU
{
()O}{OOKOMENU
4.
5.
6.
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting
the On/Off timer
this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using the on/off
time function.
By using
1.
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
PR
Time
VOL
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr
01
Vol
30
OK
VOL
PR
Off
()O}{OOKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset
Auto
.
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
5.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
21
Other functions
Special
TV and AV modes
Language
Input
{
Childolock
{
Degauss
{
Game
{
{
Inputs
be set for TV
or
(VCR),
AV mode. AV mode is used when a video
other equipment is connected to the set.
or
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
()O}{OOKOMENU
can
cassette recorder
Press the MENU button and then D / E
Special
2.
3.
button to select the
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1
AV2 (option), COMPONENT (option) on the Input pull-down
,
menu.
Special
Language
Input
{
{
TV
Childolock
{
AV1
Degauss
{
AV2
Game
{
COMPONENT
()O}OOKOMENU
AV1 : VCR connected to the Euro scart socket or AV IN 1
sockets on the set
AV2 : VCR connected to the AV IN 2 sockets on the set(option).
COMPONENT : DVD Player connected to the COMPONENT
sockets on the set (option).
PR
VOL
OK
PR
VOL
Alternatively you
can
select the TV
or
AV mode
by pressing
the TV/AV
button.
In AV mode, to return to TV mode, press the D / E
buttons.
Auto AV
or
NUMBER
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV (or AV1 ) mode when an AV signal is input. But if
you want to keep on watching TV mode, press the D / E or NUMBER
buttons. Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
5.
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
22
Other functions
Degaussing
Special
Language
Input
{
Due to the super large Tube in the set. The colour purity of the picture may be affected by other magnetic influences such as speakers. Stripes may appear on the screen or there may be colour
Childolock
{
Degauss
{
Game
{
{
patches.
1.
Press the MENU button and then D / E
Special
2.
3.
button to select the
()O}{OOKOMENU
menu.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down menu. After the degauss function works,
On mode switches to Off mode automatically.
4.
Press the OK
5.
Repeatedly
viewing.
or
F button.
press the MENU button to return to normal TV
Note : If you cannot adjust the
it again after about 4 minutes.
screen
condition
by degaussing, try
PR
VOL
OK
VOL
PR
23
Other functions
Games
Special
Language
Input
{
Childolock
{
Degauss
{
Game
{
{
Game is
an optional function, only a set with game
by using the remote control handset.
function
1.
(option)
Press the MENU button and then D / E
Special
()O}{OOKOMENU
2.
3.
4.
can
perform
this
button to select the
menu.
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select a game and then press the OK
button.
You
can
enjoy
the game
Note :
a.
Press the TV/AV
or
by using
the GAME
owner 's
manual.
MENU button to return to the normal TV
viewing.
b.
If you want
a new
game, press the RED button to start
during
the game.
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
PR
preset time elapses.
Repeatedly press the SLEEP button to select the number of minutes. The display
will appear on the screen, followed by 10,
20, 30, 60, 90, 120, 180 and 240. The timer begins to count down
-
VOL
OK
PR
VOL
-
-
from the number of minutes selected.
Note :
a.
To view the
remaining sleep time,
press the SLEEP button
once.
b.
To cancel the
until the
c.
-
-
press the SLEEP button
-
When you switch the set
time.
24
sleep time, repeatedly
display
appears.
off, the
set releases the
preset sleep
PIP
Option
PIP is
operation (option)
:
an
optional function,
can
operate.
PIP
(Picture
in
so
that
Picture) displays
a
only
the set with PIP function
picture
within
picture.
a
On and off
Press the PIP button to switch on the sub
Press this button again to switch it off.
Input
mode selection for sub
picture.
picture
Press the INPUT button to select the
input
mode for the sub
pic-
mode for the sub
pic-
ture.
Each time this button is pressed, each
displayed as shown below.
input
ture is
Programme
number
AV1
AV 2
COMPONENT (option)
Swapping
between main and sub
Press the SWAP button to
Programme
(option)
pictures
the main and sub
exchange
selection for sub
pictures.
picture
Press the PR +/- buttons to select a programme for the sub picture.
(In some models, the sub picture programme selection is available
when the sub picture is TV mode.)
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
: When the sub picture
quality might get poor.
Note
ture
picture
Sub
picture
1/9 size
1/2 size
size is 1/2 of the main
(option)
picture,
the
pic-
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
position
is
25
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXTor TV/AV button to switch off teletext. The previous
mode reappears.
PR
SIMPLE text
OK
Page selection
1.
PR
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
lowing
page.
a colour button in LIST mode
button to switch to LIST mode.
Programming
Press the
M
(option)
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press a coloured button.
2.
Using the NUMBER buttons, select the page you wish to pro-
easily
3.
4.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in the same
way.
26
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
lowing
PR
page.
27
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
the
on
screen
teletext page. The display
corner of the screen. When the
while
waiting for the
new
will appear at the top left hand
updated page is available then
the display
will change to the page number.
Press this button to view the updated teletext page.
PR
HOLD
Stops
PR
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
When
viewing
the time at the
button
again
a
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
28
again
to exit this function.
RED/GREEN,
D
/ E
or
Connection of external
You
connect additional
can
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
What is shown here may be somewhat different from your set.
ANT IN
YPB
LL
PR
DVD INPUT
COMPONENT
(480i)
OUT
AV
VDEO
(LMONO) AUDIO (R)
IN
Aerial socket
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
ANT IN
YPB
LL
PR
DVD INPUT
(480i)
COMPONENT
OUT
AV
VDEO
(L/MONO) AUDIO (R)
IN
Audio/Video in/out sockets
1.
2.
3.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV (or AV1), or AV 2.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
also record programmes received
via audio/video out sockets.
can
tape
by
the TV
on
VCR
R
AUDIO
L/MON
video
VIDEO
AV IN2
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
VCR
Euro scart socket
1.
2.
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV (or AV1 ) mode automatically. But if you want to keep on watching TV mode, press
the D / E or NUMBER buttons.
Otherwise press the TV/AV button on the remote control handset to select AV (or AV1 ). The VCR playback picture appears
on the screen.
You
can
also record programmes received
by
the TV
on
MENU OK
VOL
PR
LM NO
VCR
video
tape.
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
1
AV1
ANT IN
VCR
29
Connection of external
Component
1.
equipment
in sockets
(option)
Connect the COMPONENT video
output sockets (Y Cb Cr, Y
Pb Pr
player
ANT IN
OUT
75Ω
VIDEO
(L)- AUDIO (R)
-
or
Y B-Y
IN
INPUT sockets
2.
VCR
4.
YPB
PR
DVD INPUT (480i)
AV
IN
ANT IN
VCR
ANT IN
YP
LL
B
DVD INPUT
PR
COMPONENT
(480i)
OUT
AV
VIDEO
(L/MONO)AUDO(R)
IN
DVD
30
Player
VIDEO
(L/MONO) AUDIO (R)
COMPONENT
to the COMPONENT
the set.
(or
to AUDIO IN
player
AV 1).
Press the TV/AV button to select COMPONENT.
Press the PLAY button
The COMPONENT
OUT
DVD
Connect the audio cable from the DVD
sockets of AV
3.
R-Y) of the
(Y PB PR) on
on
the DVD
player.
playback picture
appears
on
the
screen.
Troubleshooting check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
3
Year
Guarantee
The
This
Express Guarantee
specifically covers replacement and repair of any
defective componentry
period specified
above.
or
This
faults in manufacture for the
in the
However,
accepts
no
liability
applies
to work done in any
approved
specifically excludes travel time,
Service
product is outside the
Service Centre and
Guarantee Decal
freight
where
if the
Centres normal service area.
fail to
any goods
comply with this express guarantee
because of any reasons beyond
control.
The conditions of this
repairs
at no
Faulty components will be replaced by
cost to the owner. Similarly all work shop labour costs
needed to restore the goods to their original working
condition will be met by
during the guarantee
period.
are
Express guarantee only apply if
by an approved
carried out
Service Centre in New Zealand.
This
guarantee is
not transferrable
except
as
provided
by the Consumer Guarantee Act 1993.
Express Guarantee Service
guarantees the continued supply of spare parts for
date of manufacture of not less than 5
If there is any conflict between this
1993, the provisions of the Act shall apply.
provisions
Serial No
:
period after the
components.
Model No
P/NO
a
years for electrical components and 3 years for cabinet and other cosmetic
Express
:
:
MFL31619011
(CW62B,
30036801/2/3/4 TX
,
Guarantee and the
Date Purchased
:
Purchased from
:
486-341C)
of the Consumer Guarantee Act
Download PDF

advertising