LG 49WEC Owner's manual
OWNER’S MANUAL
Transparent
Cooler
Please read this manual carefully before operating your set and retain it for future reference.
49WEC
www.lg.com
2
ENGLISH
TABLE OF CONTENTS
ELECTRICAL CONNECTIONS (IN
THE UK ONLY).............................3
SAFETY PRECAUTION................4
-- Precautions In Installing the Product................ 4
-- Precautions to the AC Adapter and Electrical
Power................................................................................. 5
-- Precautions In Moving the Product.................... 6
-- Precautions In Using the Product....................... 7
-- Basic Safety Precaution........................................... 8
-- Installation.................................................................... 13
-- Starting.......................................................................... 13
-- Storing Food................................................................ 13
Suggestion for energy saving
ENTERTAINMENT.................... 22
-- Using My Media......................................................... 22
Connecting USB Storage Devices
Files Supported by My Media
Viewing Videos
Viewing Photos
Listening to Music
Settings
-- SuperSign Contents................................................ 29
-- Information................................................................... 29
-- File Manager................................................................ 29
USER SETTINGS....................... 30
-- Main Menu Settings................................................ 30
LICENSES.................................. 14
Quick Settings
ASSEMBLY AND
PREPARATION.......................... 15
Network Settings
-- Product composition............................................... 16
TEMPERATURE CONTROL....... 17
-- Adjusting the temperatures................................ 17
-- Connecting the Wi-Fi Dongle............................. 18
-- Connecting a USB..................................................... 19
REMOTE CONTROL.................. 20
Picture Settings
General Settings
TROUBLESHOOTING................ 35
CLEANING................................ 37
PRODUCT SPECIFICATIONS.... 40
IR CODES.................................. 42
-- Command Reference List..................................... 43
-- Transmission/Reception Protocol..................... 44
3
Important
The wires in this mains lead are coloured in accordance with the following code:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This appliance must be earthed
Green and Yellow(Earth)
Brown(Live)
Blue(Neutral)
Fuse
Cord grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol ( ) or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
ENGLISH
ELECTRICAL CONNECTIONS (IN THE UK ONLY)
4
ENGLISH
WARNING -This device meets the EMC requirements
for home appliances (Class B) and is intended for home
usage. This device can be used in all regions.
SAFETY PRECAUTION
Please read these safety precautions carefully before
using the product.
This is the safety alert symbol. It alerts you to
safety messages that inform you of hazards that
can kill or hurt you or others or cause damage to
the product. All safety messages will be preceded
by the safety alert symbol and the hazard signal
word DANGER, WARNING, or CAUTION. These
words mean:
All safety messages will identify the hazard, tell you
how to reduce the chance of injury, and tell you
what can happen if the instructions are not
followed.
DANGER
You will be killed or seriously injured if you don’t
follow instructions.
WARNING
You can be killed or seriously injured if you don’t
follow instructions.
CAUTION
Indicates an imminently hazardous situation which, if
not avoided, may result in minor or moderate injury,
or product damage only.
WARNING
• Indoor Use Only.
Precautions In Installing the
Product
WARNING
• Do not install the product on a wooden or carpeted
floor as this may cause damage to the floor.
• Install the product in a location at least 3 km away
from a beach.
• Do not install the product in a location exposed to
direct sunlight.
• Maintain the appropriate temperature/moisture
conditions for the product.
-- Temperature/Humidity Conditions: 30 °C/ 50 % or
below
• Keep away from heat sources like electrical heaters.
-- Electrical shock, fire, malfunction, or deformation
may occur.
• Keep the packing anti-moisture material or vinyl
packing out of the reach of children.
-- Anti-moisture material is harmful if swallowed. If
swallowed by mistake, force the patient to vomit
and visit the nearest hospital. Additionally, vinyl
packing can cause suffocation. Keep it out of the
reach of children.
• Do not put heavy objects on the product or sit upon
it.
-- If the product collapses or is dropped, you may be
injured. Children must pay particular attention.
• Do not leave the power or signal cable unattended on
the pathway.
-- The passerby can trip or fall, which can cause
electrical shock, fire, product breakdown, or injury.
• Install the product in a neat and dry place.
-- Dust or moisture can cause electrical shock, fire or
product damage.
• If you can smell smoke or other odors or hear a
strange sound unplug the power cord and contact the
service center.
-- If you continue to use without taking proper
measures, electrical shock or fire can occur.
• If you dropped the product or the case is broken, turn
off the product and unplug the power cord.
-- If you continue to use without taking proper
measures, electrical shock or fire can occur. Contact
the service center.
5
CAUTION
• Make sure the product ventilation holes are not
blocked. Install the product in a suitably wide place
(more than 100 mm from the wall).
-- If you install the product too close to the wall,
it may be deformed or fire can break out due to
internal heat.
• Do not block the ventilation hole of the product by a
tablecloth or curtain.
-- The product can be deformed or fire can break out
due to overheating inside the product.
• Install the product on a flat and stable place that has
no risk of dropping the product.
-- If the product is dropped, you may be injured or the
product may be broken.
• Install the product where no EMI occurs.
• Keep the product away from direct sunlight.
-- The product can be damaged.
• If you install the product in a place that does not
meet the recommended conditions, this may cause
serious damage to the product’s picture quality,
life cycle, and appearance. Please check with LG or
a qualified installer before installing. This caution
applies to a place where there is an abundance of fine
dust or oil mist, chemical substances are used, the
temperature is very high or low, the humidity is very
high, or the product is likely to remain turned on for a
long period of time (airport and train station). failure
to do so will invalidate the warranty.
• Do not install the product in an area with poor
ventilation (e.g.on a bookshelf, in a closet) or outside
and avoid placing on cushions or carpets.
• In addition, do not install it where there are heating
objects such as lighting equipment.
• If multiple products are installed, opening the door can
cause interference with the other product installed
next to it. Installing at 100 mm intervals is necessary
since the product’s glass can be damaged.
Precautions to the AC
Adapter and Electrical Power
WARNING
• If water or any foreign substance goes inside the
product (TV, monitor, power cord, or AC adapter),
disconnect the power cord immediately and contact
the service center.
-- Otherwise, this may cause a fire or electric shock
due to damage to the product.
• Do not touch the power plug or AC adapter with wet
hands. If the pins of the plug are wet or dusty, wipe
and dry them before use.
-- Otherwise, this may cause a fire or electric shock.
• Make sure to completely insert the power cord into
the AC adapter.
-- If loosely connected, the poor connection may cause
a fire or electric shock.
• Be sure to use power cords and AC adapters provided
or approved by LG Electronics, Inc.
-- The use of non-approved products may cause a fire
or electric shock.
• When unplugging the power cord, always pull it by
the plug. Do not bend the power cord with excessive
force.
-- The power line can be damaged, which may cause
electric shock or fire.
• Be careful not to step or place heavy objects
(electronic appliances, clothing, etc.) on the power
cord or AC adapter. Be careful not to damage the
power cord or AC adapter with sharp objects.
-- Damaged power cords may cause a fire or electric
shock.
ENGLISH
• Do not drop an object on or apply impact to the
product. Do not throw any toys or objects on the
product screen.
-- It can cause injury to human, problem to product
and damage the display.
• Do not let the product fall or drop when connecting it
with an external device.
-- This may cause injury and/or damage to the
product.
• Leaving a fixed image on the screen for a long time
may cause damage to the screen and cause image
burn-in. To use the product for a long period of time,
use a screen saver on the PC or utilize the residual
image prevention function on the product, and when
the product is not used, turn off the power. Burn-in
and related problems are not covered by the warranty
on this product.
-- Do NOT install this product on a wall where there is
high risk of exposure to oil fumes or mist.
• This may damage product and cause it to fail.
6
ENGLISH
• Never disassemble, repair or modify the power cord
or AC adapter.
-- This may cause a fire or electric shock.
• Make sure to connect the power cable to the
grounded current.
-- You may be electrocuted or injured.
• Use the rated voltage only.
-- The product can be damaged, or you may be
electrocuted.
• In the presence of thunder and lightning, never touch
the power cord and signal cable because it can be
very dangerous.
-- It can cause electric shock.
• Do not connect several extension cords, electrical
appliances, or electrical heaters to a single outlet. Use
a power strip with a grounding terminal designed for
exclusive use with the computer.
-- A fire can break out due to overheating.
• Do not touch the power plug with wet hands.
Additionally, if the cord pin is wet or covered with
dust, dry the power plug completely or wipe dust off.
-- You may be electrocuted due to excess moisture.
• If you don’t intend to use the product for a long time,
unplug the power cable from the product.
-- Covering dust can cause a fire, or insulation
deterioration can cause electric leakage, electric
shock or fire.
• Fix the power cable completely.
-- If the power cable is not fixed completely, a fire can
break out.
• Do not insert a conductor (like a metal chopstick)
into one end of the power cable while the other
end is connected to the input terminal on the wall.
Additionally, do not touch the power cable right after
plugging into the wall input terminal.
-- You may be electrocuted.
• The appliance coupler is used as the disconnect
device.
• Please make sure the device is installed near the wall
outlet to which it is connected and that the outlet is
easily accessible.
• As long as this unit is connected to the AC wall outlet,
it is not disconnected from the AC power source even
if the unit is turned off.
• When product was moving, be careful do not scratch
the floor.
CAUTION
• Be sure to keep the outlet, AC adapter, and pins of
the power plug clean from dust and etc.
-- This may cause a fire.
• Do not unplug the power cord while the product is
in use.
-- Electrical shock can damage the product.
• Use only the power cord supplied with the unit. If
you use another power cord, make sure that it is
certified by the applicable national standards when
not provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or
the nearest authorized repair service provider for a
replacement.
Precautions In Moving the
Product
WARNING
• Make sure to turn off the product.
-- You may be electrocuted or the product can be
damaged.
• Make sure to remove all cables before moving the
product.
-- You may be electrocuted or the product can be
damaged.
• Make sure the panel faces forward and hold it with
both hands to move. If you drop the product, the
damaged product can cause electric shock or fire.
Contact an authorized the service center for repair.
• Make sure the product is turned off, unplugged, and
all cables have been removed. It may take 2 or more
people to carry larger apparatus. Do not press against
or put stress on the front panel of the apparatus.
CAUTION
• Do not shock the product when moving it.
-- You may be electrocuted or the product can be
damaged.
• Do not dispose the product-packing box. Use it when
you move.
7
WARNING
• Do not disassemble, repair or modify the product at
your own discretion.
-- Fire or electric shock accident can occur.
-- Contact the service center for check, calibration or
repair.
• When the display is to be left unattended for an
extended period of time, unplug it from the wall
outlet.
• Keep the product away from water.
-- Fire or electric shock accident can occur.
• Do not shock or scratch the front and sides of the
screen with metallic objects.
-- Otherwise, it may cause damage to the screen.
• Avoid high temperatures and humidity.
CAUTION
• Do not put or store inflammable substances near the
product.
-- There is a danger of explosion or fire due to careless
handling of the inflammable substances.
• When cleaning the product, unplug the power
cord and scrub gently with a soft cloth to prevent
scratching. Do not clean with a wet cloth or spray
water or other liquids directly onto the product. An
electric shock may occur. (Do not use chemicals such
as benzene, paint thinners, or alcohol)
• Take a rest from time to time to protect your vision.
• Keep the product clean at all times.
• Do not press strongly upon the panel with a hand or
sharp object such as nail, pencil, or pen, or make a
scratch on it.
• Keep the proper distance from the product.
-- Your vision may be impaired if you look at the
product too closely.
• Set the appropriate resolution and clock by referring
to the User’s Guide.
-- Your vision can be impaired.
• Use authorized detergent only when cleaning the
product. (Do not use benzene, thinner, or alcohol.)
-- Product can be deformed.
• Do not expose to dripping or splashing and do not
place objects filled with liquids, such as vases, cups,
etc. on or over the apparatus (e.g. on shelves above
the unit).
• Batteries should not be exposed to excessive heat.
For example, keep away from direct sunlight, open
fireplace, and electric heaters.
• Do NOT place non-rechargeable batteries in charging
device.
• Spray water onto a soft cloth 2 to 4 times, and use
it to clean the front frame; wipe in one direction only.
Too much moisture may cause staining.
• Do not use products using high voltage around the
Product. (e.g., a bug zapper)
-- Monitor may have malfunction as its electrical
shock.
• Install the anker bolt to prevent falling of product.
• Do not lean against the product.
• When humidity is high, water drip pan has full of
water. And the overflow water can flow to the
ground. Before overflow, please remove water.
-- Remove lower side of front panel and remove water
on water drip pan with manual water pump.
-- Before remove water, Be sure to unplug the power.
ENGLISH
Precautions In Using the
Product
8
ENGLISH
Basic Safety Precaution
This guide contains many important safety messages.
Always read and obey all safety messages.
WARNING
• To reduce the risk of fire, electric shock, or injury
to persons when using your product, basic safety
precautions should be followed, including the
following. Read all instructions before using this
appliance.
1 When connecting the power
• The dedicated outlet should be
used.
-- Using several devices at one
outlet may cause fire.
-- The electric leakage breaker
may damage food.
• Do not allow the power plug to
face upward or to be squeezed at
the back of the fridge.
-- Water may be flown into or the
plug may be damaged, which
causes fire or electric shock.
• Prevent the power cord from being squeezed or
imprinted if the refrigerator is pushed in after the
power plug is extracted during the installation.
-- It becomes the cause of fire or electric shock.
When moving your appliance away from the wall,
be careful not to roll over or damage the power
cord.
• Do not allow the power cord bent
or pressed by the heavy object to
be damaged.
-- It may damage the power cord
to cause fire or electric shock.
• Do not extend or modify the
length of the power plug.
-- It causes electric shock or fire
by the electric damage of the
power cord or others.
• Unplug the power plug when
cleaning, handling or replacing
the interior lamp of the fridge.
-- It may cause electric shock or
injury.
• Do not pull out the cord or touch
the power plug with wet hands.
-- It may cause electric shock or
injury.
h›Œ™
\”•œ›Œš
h›Œ™
\”•œ›Œš
9
h›Œ™
\”•œ›Œš
n™–œ•‹
~™Œ
j–——Œ™
m“ˆ›
n™–œ•‹
~™Œ
j–——Œ™
m“ˆ›
t–™ŒG›ˆ•
ZWG•ŠŒš
t–™ŒG›ˆ•
ZWG•ŠŒš
• Opening and closing the door of the refrigerator
vigorously may cause the stored food in the
refrigerator basket to fall by shock and hurt the
foot, so take precautions.
• Do not install the fridge in the
wet place or the place which
water or rain splashes.
-- Deterioration of insulation
of electric parts may cause
electric leakage.
• Pull out the power plug not by
grasping the cord but the plug
of its end.
-- It may cause electric shock or
short circuit to fire.
l›Œ™l›Œ™
iŒ•¡Œ•ŒiŒ•¡Œ•Œ
l›Œ™
iŒ•¡Œ•Œ
{••Œ™
l›Œ™
iŒ•¡Œ•Œ
{••Œ™
h›Œ™
\”•œ›Œš
t–™ŒG›ˆ•
ZWG•ŠŒš
{••Œ™
{••Œ™
n™–œ•‹
~™Œ
j–——Œ™
m“ˆ›
l›Œ™
iŒ•¡Œ•Œ
t–™ŒG›ˆ•
ZWG•ŠŒš
• When the power cord or the
power plug is damaged or the
holes of the outlet are loosed, do
not use them.
-- It may cause electric shock or
short circuit to make fire.
• Do not use or store inflammable
materials ether, benzene, alcohol,
medicine, LP gas, spray or
cosmetics near or in the fridge.
-- Deterioration of insulation
of electric parts may cause
electric leakage.
{••Œ™
n™–œ•‹
~™Œ
j–——Œ™
m“ˆ›
• Do not place the lit candle within
the fridge to deodorize. Do not
use drier to dry the inside, nor
light a candle to remove odor.
-- It may cause explosion or fire.
• Wait for 5 minutes or longer
when reconnecting the plug.
-- It may cause the operation of
the fridge to fail.
• Do not store the medicine or the
academic materials at the fridge.
-- When the material with the
strict temperature control is
stored, it may be deteriorated
or it may make an unexpected
reaction to cause any risk.
{ŒGhŠˆ‹Œ”ŠG
tŒ‹Š•Œ
h›Œ™
\”•œ›Œš
Œ‹Š•Œ
{ŒGt
h›Œ™
\”•œ›Œš
{ŒGhŠˆ‹Œ”ŠG
tŒ‹Š•Œ
{ŒGhŠˆ‹Œ”ŠG
tŒ‹Š•Œ
2 When using the fridge.
h›Œ™
\”•œ›Œš
Œ‹Š•Œ
{ŒGt
Œ‹Š•Œ
{ŒGt
{ŒGhŠˆ‹Œ”ŠG
tŒ‹Š•Œ
Œ‹Š•Œ
{ŒGt
{ŒGhŠˆ‹Œ”ŠG
tŒ‹Š•Œ
Œ‹Š•Œ
{ŒGt
• Do not use the combustible spray
near the fridge.
-- It may cause fire.
Thinner
ThinnerThinner
• Avoid the heating devices. Install
in places away from the fire such
as the place where flammable
gas is leaked.
-- It may cause fire.
Thinner
• Do not place the heavy object or
the dangerous object (container
with liquid) on the fridge.
-- It may be dropped to cause
injury, fire or electric shock
when opening or closing the
door.
Thinner
• Do not cling to the door or the
shelves of the door or the cool
chamber.
-- It may make the fridge fallen
down or damage the hands.
Especially, do not allow the
children to do the above.
• Prevent children from entering
the product.
-- It may endanger the life of a
child if the child enters the
refrigerator.
ENGLISH
• Remove water or dust from the
power plug and insert it with
the ends of the pins securely
connected.
-- Dust, water or unstable
connection may fire or electric
shock.
zŒ™ŠŒ
ŠŒ•›Œ™
zŒ™ŠŒ
ŠŒ•›Œ™
zŒ™ŠŒ
ŠŒ•›Œ™
zŒ™ŠŒ
ŠŒ•›Œ™
]
]
]
]
]
zŒ™ŠŒ
ŠŒ•›Œ™
Thinner
10
• Do not place flower vase, cup,
cosmetics, medicine or any
container with water on the
fridge.
-- It may cause fire, electric shock
or injury by dropping down.
• When disposing the fridge,
remove the packing materials
from the door.
-- It may cause to lock out the
child.
zŒ™ŠŒ
ŠŒ•›Œ™
ENGLISH
]
• In case of thunder and lightning,
or not in use for a long period of
time, detach the power plug.
-- There is a danger of electric
shock or fire.
• Do not Use the submerged fridge.
• When gas is leaked, do not touch
the fridge or the outlet and
ventilate the room immediately.
Thinner
Thinner
Thinner
zŒ™ŠŒ
ŠŒ•›Œ™
zŒ™ŠŒ
ŠŒ•›Œ™
Thinner
zŒ™ŠŒ
ŠŒ•›Œ™
zŒ™ŠŒ
ŠŒ•›Œ™
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they
do not play with the appliance.
• Install the fridge on the solid and
level floor.
-- Installing it on the unstable
place may cause death by
falling down the fridge when
opening or closing the door.
• Do not spray water at the
outside or the inside of the fridge
or do not clean it with benzene,
alcohol or thinner.
-- Deterioration of insulation
of electric parts may cause
electric shock or fire.
• When any strange smell or
smoke is detected from the
fridge, disconnect the power plug
immediately and contact to the
service center.
-- It may cause fire.
• Do not allow any person except
the qualified engineer to
disassemble, repair or alter the
fridge.
-- It may cause injury, electric
shock or fire.
• Do not use the fridge for
non-domestic purpose (storing
medicine or testing material,
using at the ship, etc.).
-- It may cause an unexpected
risk such as fire, electric shock,
deterioration of stored material
or chemical reaction.
• Do not insert the hands or the
metal stick into the exit of cool
air, the cover, the bottom of
the fridge, the heatproof grill
(exhaust hole) at the backside.
-- It may cause electric shock or
injury.
CAUTION
• Violating this direction may cause injury or damage
house or furniture. Always be careful, please.
• Do not place the food in disorder inside the
refrigerator.
-- The food may fall during opening and closing the
door of the refrigerator and hurt people.
• Do not insert the hands into the
bottom of the fridge.
-- The iron plate of the bottom
may cause injury.
11
• Because opening or closing the
door of the fridge may cause
injury to the person around it, be
careful, please.
-- Opening or closing the door
may cause feet or hands to be
caught in the chink in door or
the child to be get hurt by the
corner.
• Do not put any living animal in
the fridge.
WARNING
• This fridge must be properly installed and located in
accordance with the Installation Instruction before it
is used.
• Never unplug your fridge by pulling on the power
cord. Always grip plug firmly and pull straight out
from the outlet.
• After your fridge is in operation, do not touch the cold
surfaces in the fridge compartment, particularly when
hands are damp or wet. Skin may adhere to these
extremely cold surfaces.
Accessibility of Supply Plug
The supply plug of the refrigerator should be placed
in easy accessible position for quick disconnection in
emergency.
Supply Cord Replacement
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
DANGER
• Risk of child entrapment.
• Before you throw away your old refrigerator take off
the doors.
• Leave the shelves in place so that children may not
easily climb inside.
Don’t store
Don’t store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
Grounding (Earthing)
In the event of an electric short circuit, grounding
(earthing) reduces the risk of electric shock by providing
an escape wire for the electric current. In order to
prevent possible electric shock, this appliance must
be grounded. Improper use of the grounding plug can
result in an electric shock.
SAVE THESE INSTRUCTIONS
ENGLISH
• Carry the fridge with the handle
bar at the bottom of the front
and the top of the rear.
-- Otherwise, your hands may be
slipped to cause injury. Because
the product is heavy, carrying
it alone may hurt people or
accidents may occur.
-- Carry the fridge that door
side is upward more than four
people.
12
WARNING
ENGLISH
• Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food
storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
• The refrigerant and insulation blowing gas used in
the appliance require special disposal procedures.
When disposal, please consult with service agent or a
similarly qualified person.
CAUTION
• If the wall socket is loose, do not insert the power
plug.
-- It may cause electric shock or fire.
• Never unplug your refrigerator by pulling on the
power cord. Always grip plug firmly and pull it straight
out from the outlet.
-- You may disconnect a wire and cause a short circuit.
• Do not use a wet or damp cloth when cleaning the
plug. Remove any foreign matter from the power plug
pins.
-- Otherwise, there is a risk of fire.
• After unplugging the appliance, wait for at least five
minutes before plugging it again to the wall socket.
-- Abnormal operation of the fridge may cause
material damage.
• If the appliance is not to be used for a long time, pull
out the power plug.
-- Any deterioration in the insulation may cause fire.
• Do not let children open USB memory stick cover on
the inside of door.
• The refrigerant used in fridge and the gases in the
insulation material require special disposal procedures.
Ensure that none of the pipes on the back of the
appliances are damaged prior to disposal.
13
1 Select a good location. Place your fridge where it is
easy to use.
2 Avoid placing the unit near heat sources, direct
sunlight or moisture.
3 To ensure proper air circulation around the fridge,
please maintain sufficient space on both the sides
as well as top and maintain at least 100 mm from
the rear wall.
4 This Products are slightly tilted to the back when
installed. This is normal. (This product has been
designed to be intentionally tilted backwards, taking
into account the weight of the front door.)
-- Use the rubber pad at the foot of the product to
prevent shaking of the product.
5 Clean your fridge thoroughly and wipe off all dust
accumulated during shipping.
6 Install accessories such as shelf, etc., in their
proper places. They are packed together to prevent
possible damage during shipment.
7 Connect the power supply cord (or plug) to the
outlet. Don’t double up with other appliances on the
same outlet.
Starting
When your fridge is installed, allow it 2-3 hours to
stabilize at normal operating temperature prior to filling
it with fresh foods.
If power plug is disconnected, allow 5 minutes delay
before restarting. Your fridge is now ready for use.
Storing Food
CAUTION
• Do not store food which goes bad easily at low
temperature, such as banana, and melon.
• Allow hot food to cool prior to storing. Placing hot
food in the fridge could spoil other food, and lead to
higher electric bills.
• When storing the food, use a container with a lid. This
prevents moisture from evaporating, and helps food
to keep its taste and nutrients.
• Do not block air vents with food. Smooth circulation
of cold air keeps fridge temperature even.
• Do not open the door frequently. Opening the door
lets warm air enter the fridge, and cause temperature
to rise.
• Do not store pharmaceutical products, scientific
materials or other temperature sensitive products
in the refrigerator. Products that require strict
temperature controls must not be stored in the
refrigerator.
• Do not fill anything above the red line (PLEASE DO
NOT FILL ABOVE THIS LINE) in the fridge. If object
is above the red line, cooling performance will be
reduced.
Suggestion for energy saving
• Please do not keep the door open for a long time,
close door in the shortest time.
• Too much food are not advised to be put in. Enough
space should be kept for cool air circulating freely.
• Allow hot food to cool prior to storing. Placing hot
food in the fridge could spoil other food, and lead to
higher electric bills.
• Do not block air vents with food. Smooth circulation
of cold air keeps fridge temperature even.
• Do not open the door frequently. Opening the door
lets warm air enter the fridge, and cause temperature
to rise.
• To Keep a position of inner parts like as baskets,
drawers (Fridge), shelves and wire shelves Supplied by
manufacturer is the Most Efficient usage for energy
saving.
ENGLISH
Installation
14
ENGLISH
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD
section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p,including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others available at [www.divx.com/patents]
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
15
CAUTION
• Always use genuine components to ensure safety and product performance.
• The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
• The accessories provided with your product may vary depending on the model or region.
• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions.
• SuperSign Software & Manual
-- Downloading from the LG Electronics website.
-- Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software for your
model.
• The warranty will not cover any damage caused by using the product in an excessively dusty environment.
ENGLISH
ASSEMBLY AND PREPARATION
16
ENGLISH
Product composition
Proximity Sensors
If the person in front of
this product changed
as transparent.
(Hybrid Mode only)
IR Receiver
Door Sensor
NOTE
• You can adjust the volume by using the remote control.
CAUTION
• Please note that the proximity sensor will always keep clean.
• If foreign objects attached to the sensor causes the transparent/semi-transparent change errors.
• There is a place for installation of the product may malfunction if you have a lot of dust.
17
Your fridge has controls that let you regulate the temperature in the fridge compartments.
Adjusting the temperatures
2
3
1
OFF
TEMP
CONTROLLER
4
6
5
NOTE
• Adjust the temperature by the controller.
• Controller is attached in the upper right inside cooler.
• When setting at “OFF”, the cooler will not operate.
• Turn control knob clockwise and the unit will begin to run. Turn further to operate in colder settings.
CAUTION
• Do not Turn on Display when Temperature controller Off.
ENGLISH
TEMPERATURE CONTROL
18
ENGLISH
Connecting the Wi-Fi Dongle
1 Connect the Wi-Fi dongle to the product using a
USB cable.
[Top of the Product]
2 Attach tape to the product using the Wi-Fi dongle’s
built-in bulk. (Note: Make sure you attach the
tape so that it matches the length of the cable
protruding.)
3 Attach the Wi-Fi dongle to the door and use it.
19
1 Open the door, remove the two screws at the
bottom of the product, and then open the cover.
2 Insert your USB device and play your desired
content.
NOTE
• For an optimal connection, USB devices should have bezels less than 8 mm thick, 14 mm width and 42 mm length.
• Please covered with a lid again, after insert USB devices.
ENGLISH
Connecting a USB
20
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to
use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
and
terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the
installation actions in reverse. The illustrations may differ from the actual accessories.
CAUTION
• Do not mix old and new batteries, as this may damage the remote control.
• Be sure to point the remote control toward the remote control sensor on the monitor.
(POWER) Turns the monitor on or off.
MONITOR ON Turns the monitor on.
MONITOR OFF Turns the monitor off.
ENERGY SAVING T his model does not support this.
INPUT This model does not support this.
3D This model does not support this.
1/a/A Toggles between numerical and alphabetical.
(Depending upon the model, this feature may not be supported.)
Number and Alphabet Buttons Enters numerical or alphabetical
characters depending upon the setting. (Depending upon the model, this
feature may not be supported.)
CLEAR Deletes the entered numerical or alphabetical character.
(Depending upon the model, this feature may not be supported.)
Volume Up/Down Button Adjusts the volume.
ARC This model does not support this.
AUTO This model does not support this.
MUTE Mutes all sounds.
BRIGHTNESS This model does not support this.
21
SETTINGS A
ccesses the main menus or saves your input and exit menus.
S.MENU S uperSign menu key. (This model does not support this.)
Navigation Buttons Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK A
llows you to move back one step in the user interaction function.
EXIT Quit all OSD tasks and applications.
This model does not support this.
TILE This model does not support this.
PICTURE ID ON/OFF T his model does not support this.
USB Menu Control Buttons Controls media playback.
ENGLISH
PSM Selects the Picture Mode.
HOME Activates the Launcher.
W.BAL This model does not support this.
22
ENGLISH
ENTERTAINMENT
Using My Media
Connecting USB Storage Devices
Connect a USB storage device (e.g. a USB flash drive) to the display and use the multimedia feature.
CAUTION
• Do not turn off the monitor or remove a USB storage device when the My Media screen is activated. This could result
in loss of files or damage to the USB storage device.
• Back up files you have saved on a USB storage device frequently, as loss or damage to the files may be not covered by
the warranty.
23
Tips for using USB storage devices
ENGLISH
• Only a USB storage device can be recognized.
• A USB device does not work effectively when it is connected via a USB hub.
• A USB storage device using an automatic recognition program may not be recognized.
• A USB storage device using its own driver may not be recognized.
• The recognition speed of a USB storage device may depend on each device.
• Please do not turn off the display or unplug the USB storage device when the connected device is working. If the USB
storage device is suddenly disconnected, the stored files or the device itself may be damaged.
• Please do not connect a USB storage device which was modified to work on a PC. The device may cause the monitor
to malfunction or the content fail to be played. Use only a USB storage device which contains normal music, image or
video files.
• A USB storage device formatted as a utility program not supported by Windows may not be recognized.
• Please connect the USB storage device using the cable provided by the device manufacturer.
• Some USB storage devices may not be supported or operate smoothly.
• File alignment method of USB storage devices is similar to that of Window XP and filenames can recognize up to 100
English characters.
• Back up important files regularly as data stored on a USB storage device may be damaged. We will not be responsible
for any data loss.
• If your USB storage device has several partitions, up to four partitions or USB storage devices can be used.
• If the USB storage device does not work properly, disconnect and reconnect it.
• Detection speed differs from device to device.
• The recommended storage capacity for a USB device is 32 GB or less.
• Any device with more than the recommended capacity may not work properly.
• USB storage devices below USB 2.0 are also supported but may not function correctly in the Videos.
• A maximum of 999 sub-folders or files can be recognized under one folder.
24
Files Supported by My Media
ENGLISH
Supported External Subtitle Format
• *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema)
To use Select Play
HOME →
→ Photos/ Videos/ Music →
• Play Selection: plays back selected content.
To set Device Selection,
HOME →
→ Photos/ Videos/ Music →
• Device Selection: pimport contents from the selected device.
25
Supported Internal Subtitle Format
Supported Video Codec
Extension
Codec
Videos
VC-1 Advanced Profile (excluding WMVA), VC-1 Simple and Main Profiles
Audio
WMA Standard (excluding WMA v1/WMA Speech), WMA 9 Professional
Videos
DivX3.11, DivX4, DivX5, DivX6, XViD (except 3 warp-point GMC), H.264/AVC,
Motion Jpeg, MPEG-4
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, LPCM,
ADPCM, DTS
.mp4
.m4v
.mov
Videos
H.264/AVC, MPEG-4
Audio
AAC, MPEG-1 Layer III (MP3)
.3gp
.3g2
Videos
H.264/AVC, MPEG-4
Audio
AAC, AMR-NB, AMR-WB
Videos
MPEG-2, MPEG-4, H.264/AVC, VP8
Audio
Dolby Digital, PCM, DTS, MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Vorbis, AAC
.ts
.trp
.tp
.mts
Videos
H.264/AVC, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, AAC,
PCM
.mpg
.mpeg
.dat
Videos
MPEG-1, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
Videos
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
.asf
.wmv
.divx
.avi
.mkv
.vob
ENGLISH
• FULL HD Video
1920 x 1080: XSUB (Supports internal subtitles generated from DivX6)
26
Supported Audio File
ENGLISH
File Format
.MP3
.wav
.ogg
.wma
Item
Bit rate
Sample freq.
Support
Support
Support
Support
Information
32 Kbps to 320 Kbps
16 KHz to 48 KHz
MPEG1, MPEG2, Layer2, Layer3
PCM
Vorbis
WMA
Supported Photo File
File Format
2D (jpeg, jpg,
jpe)
Format
JPEG
2D (png)
PNG
2D (bmp)
BMP
Item
• Minimum : 64 x 64
• Maximum
- Normal Type: 15360 (W) x 8640 (H)
- Progressive Type: 1920 (W) x 1440 (H)
• Minimum : 64 x 64
• Maximum : 1920 (W) x 1080 (H)
• Minimum : 64 x 64
• Maximum : 1920 (W) x 1080 (H)
27
Viewing Videos
To play video files on display
HOME →
→ Videos
Tips for Playing Video Files
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Some user-created subtitles may not work properly.
Some special characters in subtitles are not rendered.
HTML tags are not supported in subtitles.
Subtitles in languages other than the supported languages are not available.
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is
changed.
A damaged video file may not play correctly, or some player functions may not be usable.
Video files produced with some encoders may not be played correctly.
If the video and audio structure of a recorded file is not interleaved, either video or audio is outputted.
Depending on the frame, HD videos with a maximum of 1920 x 1080 @ 25/30p or 1280 x 720 @ 50/60p are
supported.
Depending on the frame, videos with resolutions higher than 1920 x 1080 @ 25/30p or 1280 x 720 @ 50/60p
may not play correctly.
Video files other than the specified types and formats may not play correctly.
Maximum bit rate of playable video file is 20 Mbps. (Motion JPEG: 10 Mbps only)
We cannot guarantee smooth playback of files encoded level 4.1 or higher in H.264/ AVC.
Video files more than 30 GB in file size are not supported.
A DivX video file and its subtitle file must be located in the same folder.
A video file name and its subtitle file name must be identical for it to be displayed.
Playing a video via a USB connection that does not support high-speed connection may not function correctly.
Files encoded with GMC (Global Motion Compensation) may not be played.
NOTE
• Option values changed in Videos do not affect the Photos and Music and in turn are not affected by option values
changed in Photos or Music.
• Option values changed in Photos and Music do affect each other.
• When restarting a video file after stopping it, you can play from the point at which it was stopped.
• Only 10,000 sync blocks can be supported within the subtitle file.
• Korean subtitle is supported only when the OSD menu is in Korean.
• The code page options may be disabled depending on the language of the subtitle files.
• Select the appropriate code page for the subtitle files.
ENGLISH
Play video files on display. All of the saved video files are shown in your display.
28
Viewing Photos
ENGLISH
The displays on the screen may differ from the model.
Viewing image files
HOME →
→ Photos
Listening to Music
The displays on the screen may differ from the model.
Viewing music files
HOME →
→ Music
NOTE
Files with unsupported extensions are not displayed.
If a file is invalid, a broken image and the message “unrecognizable file” are displayed.
Damaged music files are displayed as 00:00 and will not be played.
A music file downloaded from a paid service with copyright protection will not play, and incorrect information may be
displayed during playback.
• You can use
,
,
,
,
buttons on the remote control also in this mode.
• You can use the
button to select the next track and the
button to select the previous track.
• If you press the
button within 5 seconds after playing the song, you will return to the previous song; if you press
the same button after 5 seconds, you will return to the start of the song.
•
•
•
•
Settings
You must register your product to play a DRM-protected DivX video.
In order to register/deregister purchased or rented DivX® VOD contents
HOME →
→ Settings → DivX® VOD
In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX
registration code from your device at www.divx.com/vod.
• Registration: view the registration code of your display.
• Deregistration: cancel the registration.
NOTE
• While you are checking the registration code, some buttons may not work.
• If you use the DivX registration code of another device, you cannot play rented or purchased DivX files. Use only the
DivX registration code assigned to your product.
• Video or audio files that are not converted using the standard DivX codec may be corrupted or not play.
• The DivX® VOD code allows you to activate up to 6 devices under one account.
• After deregistration, you must register your device again to see DivX® VOD contents.
29
Plays stored files using the Export option in SuperSign Editor.
To play back the stored files using the Export option
HOME →
Only contents distributed by SuperSign Manager are displayed and selectable.
NOTE
• If there is an AutoPlay folder in the USB storage device and its files are in supported formats, they will be played back
automatically when the USB storage device is connected to the monitor.
Information
To check the basic information of Signage Monitor
HOME →
You can see the basic information on Signage Monitor.
File Manager
You can move, copy, or delete files.
To move, copy, or delete files
HOME →
• You can move or copy files or folders from internal to external memory.
• You can move or copy files or folders from external to internal memory.
• You can delete files or folders from internal or external memory.
NOTE
• This app is for managing files and therefore cannot play media files. To play media files, launch My Media.
• Those files bigger than internal remaining memory aren`t allowed to be copied or moved to the internal memory.
ENGLISH
SuperSign Contents
30
ENGLISH
USER SETTINGS
Main Menu Settings
Quick Settings
Configures frequently used settings menus.
To turn your monitor on or off automatically
SETTINGS → Quick → On Timer/ Off Timer
You can set the On Timer/ Off Timer for your monitor. If you do not want to set the On Timer/ Off Timer, select Off
in Repeat.
Picture Settings
To Select Picture Mode
SETTINGS → Picture → Picture Mode
Select the picture mode that is best suited to the video type.
• Vivid: adjusts the video image for a retail environment by enhancing the contrast, brightness, and sharpness.
• Standard: adjusts the video image for a normal environment.
To fine-tune the Picture Mode
SETTINGS → Picture → Picture Adjust
• Contrast: Adjusts the difference between the light and dark areas of the picture. The closer the value is to 100, the
greater the difference is.
• Brightness: Adjusts the overall brightness of the screen. The closer the value is to 100, the brighter the screen is.
• Sharpness: Adjusts the sharpness of the edges of objects. The closer the value is 50, the clearer and the sharper the
edge becomes.
• Color: Softens or deepens the tints on the screen. The closer the value is 100, the deeper the colors become.
• Tint: Adjusts the balance between red and green levels displayed on the screen. The closer the value is to Red 50, the
deeper the color red becomes, and the closer the value is to Green 50, the deeper the color green becomes.
• Color Temperature: Adjusts the tints of the screen to evoke feelings of warmth or coolness.
• Reset: Resets the picture settings.
CAUTION
• If a fixed image is displayed on the screen for a long period of time, it will be imprinted and become a permanent
disfigurement on the screen. This image burn or burn-in is not covered by the warranty.
31
Network Settings
SETTINGS → Network → Signage Name
You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard.
To Set a Wireless Network
SETTINGS → Network → Wi-Fi Connection
If you have set the monitor up for a wireless network, you can check and connect to the available wireless Internet
networks.
• Add a Hidden Wireless Network: If you input the name of network directly, you can add a wireless network.
• Advanced Settings: If you input the information of network directly, you can enter a wireless network. If there is no
wireless network available, click Advanced Settings. You can add a network.
Tips for Network Setting
• Many network connection problems during set-up can often be fixed by re-setting the router or modem. After
connecting the display to the home network, quickly power off and/or disconnect the power cable of the home
network router or cable modem, then power on and/or connect the power cable again.
• Depending on the Internet Service Provider (ISP), the number of devices that can receive Internet service may be
limited by the applicable terms of service. For details, contact your ISP.
• LG is not responsible for any malfunction of the display and/or the Internet connection feature due to communication
errors/malfunctions associated with your Internet connection, or other connected equipment.
• LG is not responsible for problems with your Internet connection.
• You may experience undesired results if the network connection speed does not meet the requirements of the
content being accessed.
• Some Internet connection operations may not be possible due to certain restrictions set by the Internet Service
Provider (ISP) supplying your Internet connection.
• Any fees charged by an ISP including, without limitation, connection charges are your responsibility.
ENGLISH
To Set a Signage Monitor Name
32
NOTE
ENGLISH
• If you want to access the Internet directly on your display, the Internet connection should always be on.
• If you cannot access the Internet, check the network conditions from a PC on your network.
• If you do not complete the network settings, the network may not function correctly.
CAUTION
• Since there are various connection methods, please follow the specifications of your telecommunication carrier or
Internet Service Provider.
• Network Setting menu will not be available until the display is connected to a physical network.
Tips for Wireless Network Setting
• Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz (wireless
phones, Bluetooth devices or microwave ovens). There may also be interference from devices with a frequency of
5 GHz, same as other Wi-Fi devices.
• The surrounding wireless environment can cause the wireless network service to run slowly.
• If you do not turn off the entire local home network, network traffic may occur on some devices.
• For an AP connection, an access point device that supports wireless connection is required and the wireless
connection feature must be enabled on the device. Contact your service provider regarding availability of wireless
connection on your access point.
• Check the SSID and security settings of the AP for AP connection. Refer to the appropriate documentation for SSID
and security settings of the AP.
• Invalid settings on network devices (wired/wireless line sharer, hub) can cause the monitor to run slowly or not
operate properly. Install the devices correctly according to the appropriate manual and set the network.
• Connection method may differ according to the AP manufacturer.
33
General Settings
SETTINGS → General → Menu Language
Select one of the languages on the menu displayed on the screen.
• Menu Language: sets a language for Signage.
To set the time/date
SETTINGS → General → Time & Date
You can check or change the time.
• Time: you can set the time manually.
• Date: you can set the date manually.
To apply Daylight Saving Time
SETTINGS → General → Daylight Saving Time
You can set the application period for Daylight Saving Time and enable or disable the function by selecting On/ Off.
• Start Time/ End Time: You can set the time by configuring month/week/day/time settings.
NOTE
• When setting the Daylight Saving Time, configure the number of week and day of the week settings.
• For example, if the Daylight Saving Time starts on July 7th, 2014, Monday, set the time as July/ 1st/ Mon/ 00:00
since it is the first Monday of July, 2014.
• Depending on the month, either the fourth or fifth week can be Last.
ENGLISH
To configure the language
34
To turn your monitor on or off automatically
ENGLISH
SETTINGS → General → Timers
You can set the On Timer/ Off Timer for your monitor.
• On Timer: you can set the time when your monitor turns on.
• Off Timer: you can set the time when your monitor turns off.
NOTE
• On Time/ Off Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time in the
schedule list. If multiple preset times are stored in the schedule list, this function works at the nearest time from the
current time.
• Once the on or off time is set, these functions operate daily at the preset time.
• The scheduled power-off function works properly only when the device time is set correctly.
• When the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on
time if the set is turned on, and vice versa if the set is turned off.
To reset your monitor settings
SETTINGS → General → Reset to Initial Settings
Resets all monitor settings.
35
Before calling for service, check this list.
It may save you both time and expense.
This list includes common occurrences that are not the result of defective workmanship or materials in this appliance.
No image is displayed.
Problem
Is the product power cord connected?
Action
• Check if the power cord is correctly plugged into the power outlet.
After-image appears on the product.
Problem
Action
After-image appears when the product is
turned off.
• If you display a fixed image for a long time, the pixels may be quickly
damaged. Play a video instead of a still image.
• When a dark image is displayed on the screen after an image with high
contrast (black and white or gray), this may cause image sticking. This
is normal for LCD screen products.
The audio function does not work.
Problem
No sound?
Sound is too low.
Action
• See if the audio cable is connected properly.
• Adjust the volume.
• Adjust the volume.
Screen color is abnormal.
Problem
Do black spots appear on the screen?
Action
• Several pixels (red, green, white, or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. This is not a malfunction of the LCD.
ENGLISH
TROUBLESHOOTING
36
The operation does not work normally.
ENGLISH
Problem
Action
• Is the Timers set?
• Check the power control settings. Power interrupted.
I see a white screen.
• Do you have any video files waiting to be played?
• Check if the video playback has been paused. Run the My Media app
and play the video again.
The screen stays transparent.
• Check whether the door has been closed properly.
The proximity sensor operates even when • The proximity sensor may operate when there are foreign substances
there is no person around.
like dust, etc. in your installation environment.
• Change the Signage Setup > Proximity Sensitivity value from High to
Mid or Low.
Screen is dimmer than before
• When Cooler Temperature Controller is Off, Temperature is increased,
so screen is dimmed for protect Product.
• Check whether the door has been closed properly.
Fridge does not operate
• Power plug may be unplugged from the electric outlet.
-- Plug it in securely.
Fridge Compartment Temperature too
• Temperature control not set on proper position.
warm
-- Refer to Temperature Control section.
• Appliance is placed close to heat source.
• Warm weather-frequent door openings.
• Door left open for a long time.
Vibration or Rattling or Abnormal Noise
• The floor on which the fridge is installed may be uneven or the fridge
may be unstable.
• Unnecessary objects placed in the back side of the fridge.
Moisture forms on Cabinet Surface
• This phenomenon is likely to occur in a wet space. Wipe it with a dry
towel.
Moisture collects inside
• Too frequent or too long door openings.
-- In humid weather, air carries moisture into fridge when doors are
opened.
Fridge has odor
• Foods with strong odors should be tightly covered or wrapped.
• Check for spoiled food.
• Interior needs cleaning. Refer to CLEANING section.
Door not closing properly
• Fridge is not level.
• The floor on which the fridge is installed may be uneven or the fridge
may be unstable.
The proximity sensor does not work.
• Sensor data is ignored, when object are in front of product during 1
minutes. But object is not during 1minutes, Sensor is starting work.
The power suddenly turned off.
NOTE
• The software-related contents may be changed without prior notice due to upgrade of the product functions.
37
Before Cleaning
• Be sure to unplug the power.
Exterior
• Clean the outside of the fridge with a soft and dry cloth.
Interior
• Same as above.
After Cleaning
• Check that the power cord is not damaged, power plug has not overheated, and that the power plug is tightly
inserted into the outlet.
Cleaning Stainless Steel Interior And Exterior
• Damage to stainless steel finish due to improper use of cleaning products or non- recommended products is NOT
covered under this product’s warranty.
• Do
-- Use warm, soapy water and a soft, clean cloth or sponge.
-- Rinse surfaces with clean, warm water and dry immediately to avoid water spots.
• DO NOT USE
-- Abrasive or harsh cleaners
-- Ammonia
-- Chlorine bleach
-- Concentrated detergents or solvents
-- Metal or plastic-textured scouring pads
-- Vinegar-based products
-- Citrus-based cleaners
ENGLISH
CLEANING
38
Cleaning The Condenser Fins
ENGLISH
• To maintain proper refrigeration performance, the condenser coil must be free of dust, dirt, and grease. This will
require periodic cleaning. condenser fins should be cleaned at least every three months (90 days) or as needed.
Clean The Gasket
• The door gasket should be cleaned frequently to maintain proper sealing.
Check After Cleaning
• Check the unit again for safety.
• Check that the unit is operating properly.
Indoor usage only
• lnstall the cooler indoor so it will not get wet from the rain.
WARNING
• Be sure to dry the appliance with a cloth.
• Do not use abrasive, petroleum, benzene, alcohol, thinner, hydrochloride acid, boiling water, rough brush, etc, as they
may damage parts of the fridge.
• It is the responsibility of the purchaser in case of followings.
-- Compressor under low voltage
-- Compressor more than 7 feet (2 meter) from plug-in connection
-- Compressor under unstable voltage
-- Compressor not under 220 V/ 50 Hz
39
CAUTION
Recommended operating conditions
1 Change the background and the character colors using the same time interval.
ID: UPM 123
PW: ****
ID: UPM 123
PW: ****
When changing colors, using complementary colors helps to prevent image sticking.
Glass
BM
CF
BM
CF
BM
CF
CF
OC
PI
LC
PI
TFT Layers
Glass
ITO or MoTi Pixel Layer
2 Change the image using the same time
I D :interval.
UPM123
PW : ******
I D : UPM123
PW : ******
Make sure that the characters or images before changing the image remain in the same location after changing the
image.
What is image sticking?
When the LCD panel displays a static image for an extended period of time, it can cause a voltage difference between
the electrodes that operate the liquid crystals. When the voltage difference between the electrodes builds up over
time, liquid crystals have a tendency to remain aligned in one direction. During this process, a previously displayed image
remains visible. This phenomenon is referred to as image sticking.
ENGLISH
• Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an
extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood
of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once
every 12 hours at the very minimum; if done more frequently, the prevention of image sticking is more effective.
40
ENGLISH
PRODUCT SPECIFICATIONS
The product specifications below may be changed without prior notice due to upgrade of product functions.
“ ” refers to alternating current (AC), and “
” refers to direct current (DC).
LCD screen
Screen type
Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Pixel pitch
0.1864 mm (H) x 0.5593 mm (V)
Video signal
Maximum resolution
1920 x 1080 @ 60 Hz
Input ports
USB IN
Embedded battery
Applied
Power
Rated power
(220-240) V~ 50 Hz 2.5 A
Speaker
RMS Audio Output
10 W + 10 W (R + L)
Speaker Impedance
8Ω
Operating Temperature
5 °C to 35 °C
Operating Humidity
10 % to 80 %
Environmental Conditions
Dimensions (Width x Height x Depth)/ Weight
Compressor
HKL27YE - 5
Eva. fan motor
IS-3210
DWSD
Cond. fan motor
DAI-8204
DWST-V
Temperature controller
GNA series
Mass of refrigerant
R-134a/ 0.220 kg
Max. Rated Input of LED lamp
63 W
Refrigeration System
Fan Cooling Type
Atmospheric Lifetime (years)a
13.8
Global Warming Potential (GWP)
1430 (kgCO2-eq)
Compositionb
HFC-134a
CO2-equivalent
0.315 (Ton)
a
730 mm x 1861 mm x 773 mm/ 114 kg
41
*Contains fluorinated greenhouse gases.
*Hermetically sealed.
ENGLISH
N/A = Not available
a
IPCC (2001)
b
Calm and Hourahan (2001)
42
ENGLISH
IR CODES
All models do not support the HDMI/USB function.
Some key codes may not be supported depending on the model.
Code (Hex)
Function
08
(POWER)
Remarks
Remote control button
C4
MONITOR ON
Remote control button
C5
MONITOR OFF
Remote control button
10
Number Key 0
Remote control button
11
Number Key 1
Remote control button
12
Number Key 2
Remote control button
13
Number Key 3
Remote control button
14
Number Key 4
Remote control button
15
Number Key 5
Remote control button
16
Number Key 6
Remote control button
17
Number Key 7
Remote control button
18
Number Key 8
Remote control button
19
Number Key 9
Remote control button
02
Volume
Remote control button
03
Volume
1/a/A
Remote control button
32
2F
CLEAR
Remote control button
4D
PSM (Picture Mode)
Remote control button
09
MUTE
Remote control button
43
SETTINGS (Menu)
Remote control button
40
Up
Remote control button
41
Down
Remote control button
06
Right
Remote control button
07
Left
Remote control button
44
OK
Remote control button
28
BACK
Remote control button
5B
EXIT
Remote control button
Remote control button
B1
Remote control button
B0
Remote control button
BA
Remote control button
8F
Remote control button
Remote control button
8E
7C
HOME
Remote control button
43
COMMAND
DATA (Hexadecimal)
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
Picture Mode
Contrast
Brightness
Sharpness
Color
Tint
Color temperature
Mute
Volume Control
Time 1 (year/month/day)
Time 2 (hour/minute/second)
Off time schedule
On Time Schedule
Off Timer (Repeat/Time)
On Timer (Repeat/Time)
Language
Reset
Key
Time Elapsed
Product Serial Number
Software Version
Remote Controller Lock
1
d
k
k
k
k
k
x
k
k
f
f
f
f
f
f
f
f
m
d
f
f
t
2
x
g
h
k
i
j
u
e
f
a
x
c
b
e
d
i
k
c
l
y
z
p
See Picture Mode
00 to 64
00 to 64
00 to 32
00 to 64
00 to 64
00 to 64
00 to 01
00 to 64
See Time 1
See Time 2
00 to 01
00 to 01
See Off Timer
See On Timer
See Language
00, 02
See Key
FF
FF
FF
00 to 02
23
Speakers
d
v
00 to 01
24
Daylight Saving Time
s
d
See Daylight Saving Time
*Note: Only the power and key commands can be used while media files are playing from a USB device or internal/
external memory. The commands other than the power and key commands will be treated as NG. Some commands
may not be supported depending on the model.
ENGLISH
Command Reference List
44
ENGLISH
Transmission/Reception Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*[Command1]: identifies between the factory setting and the user setting modes.
*[Command2]: controls monitor sets.
*[Set ID]: Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to
1000 (01H~3E8H) under Settings in the OSD menu.
Selecting ‘00H’ for Set ID allows the simultaneous control of all connected monitors.
*[Data]: Transmits command data.
Data count may increase depending on the command.
*[Cr]: Carriage Return. Corresponds to ‘0x0D’ in ASCII code.
*[ ]: White Space. Corresponds to ‘0x20’ in ASCII code.
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
*The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if
the data is FF, it indicates the present status data. If the data is in data write mode, it returns the data of the PC
computer.
*If a command is sent with Set ID ‘00’ (=0x00), the data is reflected to all monitor sets and each monitor set does not
send an acknowledgement (ACK).
*If the data value ‘FF’ is sent in control mode via RS-232C, the current setting value of a function can be checked (only
for some functions).
*Some commands are not supported depending on the model.
45
06. Tint (Command: k j)
Adjusts the screen tint.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data00: Vivid
01: Standard
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
Data 00 to 64: Tint red 50 to green 50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
02. Contrast (Command: k g)
Adjusts the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
03. Brightness (Command: k h)
Adjusts the screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
07. Color Temperature (Command: x u)
Adjusts the screen color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: warm 50 to cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
08. Mute (Command: k e)
Mutes/unmutes the sound.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Mute
01: Unmute
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
04. Sharpness (Command: k k)
Adjusts the screen sharpness.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
09. Volume Control (Command: k f)
Adjusts the playback volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 32: Sharpness 0 to 50
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
Data 00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
05. Color (Command: k i)
Adjusts the screen color.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
01. Picture Mode (Command: d x)
Selects a picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
46
ENGLISH
10. Time 1 (year/month/day) (Command: f a)
Adjusts the Time 1 (year/month/day) value.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
13. On Time Schedule (Command: f b)
Enables/disables the On Time schedule.
Transmission
[f][b][ ][Set ID][ ][Data][Cr]
Data1 04~1B: year 2014 to 2037
Data2 01 to 0C: January to December
Data3 01 to 1F: 1st to 31st
Data00: Off
01: On
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
*Enter “fa [Set ID] ff” to view the Time 1 (year/month/
day) settings.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
11. Time 2 (hour/minute/second) (Command: f x)
Adjusts the Time 2 (hour/minute/second) value.
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00 to 17: 00 to 23 hours
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
*Enter “fx [Set ID] ff” to view the Time 2 (hour/
minute/second) settings.
*This function is available only when Time 1 (year/
month/day) is set.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
12. Off Time Schedule (Command: f c)
Enables/disables the Off Time Schedule.
Transmission
[f][c][ ][Set ID][ ][Data][Cr]
Data00: Off
01: On
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
47
Data1
1. f1h to f7h (reading data)
F1: reads the 1st Off Timer data
F2: reads the 2nd Off Timer data
F3: reads the 3rd Off Timer data
F4: reads the 4th Off Timer data
F5: reads the 5th Off Timer data
F6: reads the 6th Off Timer data
F7: reads the 7th Off Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all Off Timer settings
E1: erases the 1st Off Timer setting
E2: erases the 2nd Off Timer setting
E3: erases the 3rd Off Timer setting
E4: erases the 4th Off Timer setting
E5: erases the 5th Off Timer setting
E6: erases the 6th Off Timer setting
E7: erases the 7th Off Timer setting
3. 01h to 0Ch (sets the day of the week for the Off
Timer)
01: Once
02: Daily
03: Mon. - Fri.
04: Mon. - Sat.
05: Sat. - Sun.
06: Every Sunday
07: Every Monday
08: Every Tuesday
09: Every Wednesday
0A: Every Thursday
0B: Every Friday
0C: Every Saturday
Data2 00 to 17: 00 to 23 hours
Data3 00 to 3B: 00 to 59 minutes
* To read or delete the Off Time Schedule list, [Data2]
[Data3] must be set to FFH.
Example 1: fe 01 f1 ff ff – reads the first index data in
Off Timer.
Example 2: fe 01 e1 ff ff - deletes the first index data
from Off Timer.
Example 3: fe 01 04 02 03 - sets Off Timer to 02:03
from Monday to Saturday.
*This function is available only when Time 1 (year/
month/day) and Time 2 (hour/minute/second) are set.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENGLISH
14. Off Timer (Repeat/Time) (Command: f e)
Configures Off Timer (Repeat/Time) settings.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
48
ENGLISH
15. On timer (Repeat/Time) (Command: f d)
Configures On Timer (Repeat/Time) settings.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. f1h to f7h (reading data)
F1: reads the 1st On Timer data
F2: reads the 2nd On Timer data
F3: reads the 3rd On Timer data
F4: reads the 4th On Timer data
F5: reads the 5th On Timer data
F6: reads the 6th On Timer data
F7: reads the 7th On Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all On Timer settings
E1: erases the 1st On Timer setting
E2: erases the 2nd On Timer setting
E3: erases the 3rd On Timer setting
E4: erases the 4th On Timer setting
E5: erases the 5th On Timer setting
E6: erases the 6th On Timer setting
E7: erases the 7th On Timer setting
3. 01h to 0Ch (sets the day of the week for the On
Timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2 00 to 17: 00 to 23 hours
Data3 00 to 3B: 00 to 59 minutes
*To read or delete an On Time schedule list, [Data2]
[Data3] must be set to FFH.
Example 1: fd 01 f1 ff ff - reads the first index data
from On Timer.
Example 2: fd 01 e1 ff ff - deletes the first index data
from On Timer.
Example 3: fd 01 04 02 03 - sets On Timer to 02:03
from Monday to Saturday.
*This function is available only when Time 1 (year/
month/day) and Time 2 (hour/minute/second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
49
18. Key (Command: m c)
Sends a key code for the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data 00: Česky
01: Dansk
02: Deutsch
03: English
04: Español(EU)
05: Ελληνικά
06: Français
07: Italiano
08: Nederlands
09: Norsk
0A: Português
0B: Português do brasil
0C: Русский
0D: Suomi
0E: Swedish
0F: 한국어
10: 繁体
11: 日本語
12: 中文
DataIR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
17. Reset (Command: f k)
Performs the Picture and Factory Reset functions.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data00: Picture Reset
02: Initial Settings (factory reset)
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
For key codes, see IR Codes.
*Some key codes are not supported depending upon
the model.
19. Time Elapsed (Command: d l)
Checks the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Read status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
*The data received is shown as a hexadecimal value.
20. Product serial number (Command: f y)
Checks the serial number of the product.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check product serial number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
*Data is in ASCII code.
21. Software Version (Command: f z)
Checks the software version of the product.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
16. Language (Command: f i)
Sets the OSD language.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
50
ENGLISH
22. Remote Controller Lock (Command: t p)
Configures the IR operation settings of the product.
Transmission
[t][p][ ][Set ID][ ][Data][Cr]
Data 00: locks off all of the keys
01: locks on all of the keys except the Power key
02: locks on all of the keys
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
24. Daylight Saving Time (Command: s d)
Sets the Daylight Saving Time feature.
Transmission
[s][d][ ][Set ID] [ ][Data1] [ ][Data2] [ ][Data3] [ ]
[Data4] [ ][Data5] [Cr]
Data100: Off (Data2~5: FFH)
01: Start time
02: End time
Data2 01 to 0C: January to December
Data3 01 to 06: Weeks 1 to 6
23. Speakers (Command: d v)
Sets the speakers feature.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
*The maximum value of [Data3] may vary depending
on the date.
Data4 00 to 06 (Sunday to Saturday)
Data5 00 to17: 00th to 23th hour
Data00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
*To read the start/end times, enter FFH in [Data2]
through [Data5].
(Ex. 1: sd 01 01 ff ff ff ff - Checks the start time.
Ex. 2: sd 01 02 ff ff ff ff - Checks the end time.)
*This feature is only available when Clock 1 (year/
month/day) and Clock 2 (hour/minute/second) are
set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG] [Data1][Data2][Data3]
[Data3][Data4][Data5][x]
*Depending upon the model, this feature may not be
supported.
Make sure to read the Safety Precautions before using
the product.
The model and serial numbers of the SET are located on
the back and one side of the SET. Record it below should
you ever need service.
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download. LG Electronics will also provide open
source code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as the
cost of media, shipping, and handling) upon email
request to opensource@lge.com . This offer is valid for
three (3) years from the date on which you purchased
the product.
MODEL
SERIAL
Temporary noise is normal when powering ON or OFF
this device.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising