LG | WD-14270RD | LG WD-14270RD Owner’s Manual

P/No.: 3828ER3045Z
Washing
Machine
OWNER'S MANUAL
WD-14270RD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Direct Drive
■
System
The advanced Brushless DC motor
belt and
directly
drives the drum without
pulley.
Tilted Drum and Extra
Large Door Opening
Tilted drum and extra large opening make it possible
and unload clothing more easily.
■
to load
Water Circulation
■
Spray detergent
Clothes
solution and water onto the load
and
over.
and
wash
detergent suds can be removed
shower during rinse cycle. The water
water and detergent more efficiently.
thoroughly during
more easily by the
water
circulation system
uses
are
soaked
over
more
quickly
The
cycle.
both
RollerJets
■
Washing ball enhances the wash performance and reduces
damage
to the clothing. The jets spray and help tumble clothes to enhance
washing performance while maintaining fabric care.
Built-in Heater
■
Internal heater
automatically heats
temperature on selected cycles.
the water to the best
Child Lock
■
The Child lock prevents children from
change the settings during operation.
C
pressing
any button to
ontents
Warnings ...............................................................................................3
Specification..........................................................................................4
Installation .............................................................................................5
Care before
washing ...........................................................................11
Adding detergent.................................................................................12
Function ..............................................................................................13
How to
use
washer .............................................................................14
Maintenance .......................................................................................22
Troubleshooting guide ........................................................................25
Terms of Warranty ..............................................................................28
2
W
arnings
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
store the washer where it will
?
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance
?
published user-repair
or
?
dry articles that have been
cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
instructions.
the
Keep
appliances
underneath and around your
free of combustible materials such
?
area
etc.
on,
with,
Do not slam the washer door closed
?
inside
hang
?
Never reach into washer while it is
moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame
try to
possibility of electric shock,
unplug this appliance from the power supply
or
disconnect the washer at the household
on
crawl inside the washer.
or
To minimize the
distribution
Do not leave the washer door open.
An open door could entice children to
or
or
care
force the door open when locked. This could
result in damage to the washer.
as
Close supervision is necessary if this appliance
is used by or near children.
the door
?
instructions
Do not wash
out.
play
this or any other appliance.
?
using
garment manufacturer's wash and
Do not allow children to
?
to persons when
that you understand and have the skills to carry
lint, paper, rags, chemicals,
?
injury
precautions, including the following:
exposed to the weather.
instructions
or
panel by removing the fuse
or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
retardant of fabrics.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
-
proper outlet installed
by
a
qualified electrician.
3
S pecification
Name
Power
:
loading washing
machine
:220-240V~,50Hz
supply
Size
:
Weight
Wash capacity/Max. Watt
Dry capacity/Max. Watt
Spin speed
Water consumption
:
Permissible water pressure
:
The appearance and
units
Front
:
:
:
:
686mm(W)×767mm(D)×982mm(H)
91kg
14kg(2200W)
8kg(2150W)
No spin/400/800/1000/1200
140ℓ(10ℓ/ kg )
0.3-10kgf/㎠ (30-1000kPa)
specifications
may be varied without notice to raise the
quality.
Accessories
Inlet
4
hose(1EA)
Spanner
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin, pay particular
is installed
on a
which may be subject to infestation by cockroaches or other
attention to keeping the appliance and its surroundings in clean condition at
are areas
all times.
Any damage which may
appliance guarantee.
be
cause
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
?
appliance is fitted
Packing
prevent internal damage during transport.
and all transit bolts must be
removed before
When
with transit bolts to
using
the washer.
the base, be
the additional packing
unpacking
remove
support in
packing.
sure
to
the middle of the base
Removing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
are
along
not
with the rubber
removed,
it may
2. Unscrew the 4 bolts with
the spanner
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
cause
vibration, noise and malfunction.
3. Take out the 4 bolts
heavy
?
Whenever the
appliance is transported, the
transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation place requirement
Level floor
Allowable
:
under entire washer is 1˚
slope
Power outlet
:
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with more than one
appliance.
Additional Clearance :
For wall, door and floor modeling is
(10cm : rear /2cm:right & left side)
Do not place or store
washer at any times.
They
can
damage
required.
laundry products
the finish
or
on
top of
controls.
Positioning
Install the washer
Make
?
?
?
?
?
Never
placing
the washer
on
tiles, apply
a
impeded by carpets,rug
etc.
rubber mat under the feet.
to correct any unevenness in the floor with
materials under the washer.
try
pieces
of wood, cardboard
or
similar
If it is
impossible to avoid positioning the washer next to a gas cooker or coal burning
stove,an insulating(686x767x982mm) covered with aluminum foil on the side facing the
cooker or stove,must be inserted between the two appliance.
The washer must not be installed in
Please
the
where the
that when the washer is installed, it is
breakdown.
a
With the washer installed
the
rooms
ensure
event of
?
flat hard floor.
that air circulation around the washer is not
sure
Before
on a
easily
can
drop
below 0°C.
accessible for the
engineer
in the
using the transit bolt spanner provided ensuring
appliance is stable, and a clearance of approximately 20mm is left between the top of
washer and the underside of the work-top.
6
adjust
all four feet
temperature
nstallation
I
Electrical connection
1. Do not
use an
extension cord
or
double
adapter.
be replaced by the manufacturer
2. If the
3.
supply cord is damaged, it must
similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after
4. Connect the machine to
5. The
?
?
?
appliance
must be
an
so
that the
plug
is
easily
its service
agents
or
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting water supply
hose
▶Water
supply pressure must be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
▶Don't strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 1000kPa, a decompression
device should be installed.
?
Two rubber seals
are
?
?
?
in order to
are
supplied
with the water inlet hoses these
water leaks.
prevent
Check water tightness of washing machine connections by
turning the tap completely on.
Periodically check the condition of the hose and replace the
hose if necessary.
Make sure that there is
no
kink
on
the hose and that it is not
crushed.
▶When your washer has
?
?
two
valves,
The Inlet hose which has red connector is for the hot water tap.
If the washer has two valves, the energy is saved by using hot
valve.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
3. Push the
connector up till the
packing is
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
water
till
3. Connect the
water
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
the diameter of the tap is
remove the guide plate.
Connector
case
large
Guide
Water
Middle
hose
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
tap
Horizontal tap
?
Extension tap
Your machine
comes
with
only
cold water connection.
?
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
Square tap
8
I
nstallation
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
Turn off the
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
of suffocation !
Keep
all
packaging
a
risk
well away from children
Installation of drain hose
?
?
?
?
?
The drain hose should not be
When
installing the drain hose sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
nstallation
I
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
appliance
of the
corner
solid and level floor surface,
or
suspended type flooring
excessive vibration and unblance
insert
adjust the adjustable
pieces of wood etc. under the feet)
Make
sure
that all four feet
are
then check that the
appliance
washer is level, tighten
In the
feet
as
required. (do
case
not
stable and
is
resting on the floor and
perfectly level. (use a spirit level)
of the
washing machine is installed
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
NOTE
a
may contribute to
the lock nuts up towards
the washer. All lock nuts must be tightened.
After the
in
errors.
2. If the floor is uneven,
※
preferably
room.
Timber
NOTE
on a
that the
base
on a
of
raised
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
Tile floors
on a
clean, dry and level.
flat hard floor.
on
sections and stick the
Tread Mate is
※
be
(Slippery floors)
Position each foot
?
must
a
the Tread Mate and level the machine
pieces
on
to
the
to suit.
dry tile where machine
(Cut Tread
is to be
Mate into 70x70
placed.)
self adhesive material used on ladders & steps that prevents
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
?
at
If
?
least 15mm thick under the
possible
install the washer in
washer, secured
one
of the
corners
※
Insert the rubber cups to reduce vibration.
※
Rubber cups
( p/no.
4620ER4002B
)
to at
can
be
least 2 floor beams with
of the
room,
screws.
more
Cup
be purchased from
hardware suppliers.
It
※
where the floor is
purchasedfrom
slipping.
Rubber
Wooden floors
?
mm
can
stable.
the LG spare parts
department.
Important!
?
?
?
?
?
Proper placement and levelling of the washer ensures long, regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
It must not "Seesaw"
10
across corners
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C, add
without clothing.
a
This will
remove
a
half load of
allow the unit to wash
detergent)
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
label
on
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
To
soiled items with
lightly
soiled
Soil
one.
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
before
Separate
Separate
clothes
according
to amount of soil.
white fabrics from colored fabrics.
Wash lint
producers and
separately.
lint collectors
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers, hooks and strings
make
sure
snag
?
on
that these items don't
other clothes.
Pre treat dirt and stains
a
little
to
by brushing
detergent dissolved
in water
onto stains like collars and cuffs to
help shift dirt.
11
dding
detergent
A
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
?
dosage
The
detergent should be used according to
instruction of the detergent manufacture.
If too
much
detergent is
recommended amount,
occur
used more than the
too
heavy load to the
malfunction)
Use powder
loading
?
Main wash
only
U
?
Adding
can
washing result
motor. (Causing a
detergent only for the front
washer.
Detergent usage
may need to be
adjusted
for water temperature, water hardness,
size and soil level of the load. For best
?PreWash+MainWashU
2.
many suds
and this will decrease the
or cause
?
the
results, avoid oversudsing.
Fabric Softener
Tips
Full load
according
:
to
manufacturer's recommendation.
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
?
2
days.
Softener will
automatically be added
during the last rinse cycle.
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
12
3/4 of the normal amount.
Minimum load
:
1/2 of full load.
early dispensing
of the fabric softener which could stain
?
:
Do not pour fabric softener
directly on the cloths
?
Detergent is flushed from the dispenser
the beginning of the cycle.
at
F
unction
Recommended
Energy
courses
label data based
according
on
to the
laundry type
program cotton 60˚C & very
dry
,
tested in accordance with
EN60456.
Fabric
Program
Cotton
Type
Color fast garments
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton (underwear...)
Cotton-Eco
is the
in Cotton.
Laundry type
same
Polyamide,
Acrylic,
Synthetic
Polyester.
Delicate
Delicate
laundry easily
damaged.
Machine washable woolens
Wool/Silk
with pure new wool only.
Hand
Wash
Quick 30
Duvet
Water
"Hand Wash" marked
delicate and wool laundry.
Colored Landry which
is lightely soiled fast.
Cotton
bedding with filling,
duvet, pillow, blanket, sofa
cover with light filling.
Temperature
:
Proper
Temp.
(Option)
Option
Maximum
Load
Time
in
Minutes
60˚C
(Cold,
30˚C, 40˚C,
95˚C)
60˚C
(40˚C)
Rating
139
Rating
159
5.0kg
82
4.0kg
64
3.0kg
61
3.0kg
52
5.0kg
30
Soak
Pre Wash
Rinse+Spin
Spin Only
Dry Only
40˚C
(Cold,
30˚C,60˚C)
30˚C
(Cold, 40˚C)
30˚C
(Cold, 40˚C)
Rinse+Spin
Spin Only
Cold
(30˚C,40˚C)
30˚C
(Cold, 40˚C)
30˚C
(Cold, 40˚C)
Rinse+Spin
Spin Only
Dry Only
Rinse+Spin
Spin Only
1
king size
(9 Tog)
81
Select the water temperature to the wash cycles.
Always follow garment manufacture's care label or instructions when
laundering.
13
H
ow
1. Cotton
to
use
washer
automatically
selected upon power
?
?
?
Press the
Power(
Press the
Start/Pause(
)
-
Wash
:
Main wash
Rinse
:
3 times
-
Water temperature
Program : Cotton
14
) button.
?
?
:
60˚C
Press the
Selecting
Power(
) button
to start.
Select the conditions which you want to
use, by pressing each button.
For
selecting the each conditions, please
refer to the page15~page21
?
-Spin:800rpm
-
on.
button to start.
Initial condition
-
2. Manual
Press the Start/Pause button.
H
(1)
(2)
(3)
(4)
ow
Button
Dial
:
:
to
use
washer
Power
(5)
(6)
(7)
(8)
Program
Button
:
Start/Pause
Button
:
Option
Child lock
Button
:
Rinse
Button
:
Button
:
Spin
Temperature
(9) Button : Dry
(10) Button : Time Save
(11) Button : Time Delay
Power
Program
1. Power
?
Press the
Power(
on
and off.
power
?
)
(Program)
button to turn
?
To cancel the Time Delay function, the
Power( ) button should be pressed.
9 programs
-
Cotton
-
Cotton-Eco
-
When the Power(
) button is pressed,
the washer is ready for Cotton program.
And the other initial conditions as follows.
-
-
?
?
So, if you
want to advance into the
washing cycle without changing the
)
program, just press Start/Pause(
button and then the washer will proceed.
Initial program
-Cotton Program / Main Wash /
Normal Rinse / 800 rpm / 60˚C
available
according
to the
laundry type.
2. Initial Program
?
are
-
-
Synthetic
Delicate
Hand Wash
Quick 30
-
Duvet
-
Drain
Wool/Silk
Lamp
will
light
up to indicate selected
program.
?
-
When
Start/Pause(
)
button is
pressed,
the Cotton program is automatically selected.
By turning the Program dial, the program is
selected in order of "Cotton
Synthetic
-
Hand Wash
Delicate
-
-
Quick 30
-
Cotton-Eco
Wool/Silk
-
Duvet
-
-
-
Drain".
Regarding to the laundry type for each program
Please refer to the page13.
15
H
ow
to
use
washer
Start/Pause
Option
By pressing the option
button, only one option
?
function may be selected.
1. Start
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
cycle.
2. Pause
?
?
If temporary stop of wash cycle is needed,
press "Start/Pause" button.
When in Pause, the power is turned off
automatically after 4 minutes.
1. Soak
Use this mode to wash normal clothes
?
and
heavy
clothes which
are
thick
excessively dirty.
Available in Cotton, Cotton-Eco and
?
or
Synthetic.
2. Pre Wash
?
Use this
for load that need
option
pretreatment. Add
17 minutes pre wash and
drain.
-
When
using Pre Wash option, do not use
liquid detergent in the main wash
comportment. Use powder for the main
wash.
?
Available in Cotton, Cotton-Eco and
Synthetic.
3. Rinse+Spin
?
Use this
option
4. Spin
?
to rinse and then
spin.
Only
When you want
spin only,
select the this
option.
5.
?
Dry Only
When you want
option.
16
Dry only,
select the this
H
ow
to
use
washer
Child lock
Rinse
?
By pressing the Rinse
button, the Rinse type
can
be selected.
?
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
?
Child lock
by pressing and holding the
Option and Rinse button simultaneously.
(About three seconds)
can
be set
1. Normal
?
Cotton-Eco / Cotton /
Synthetic performs 3
Rinses
?
?
When child lock is set, all buttons
Wool/Silk / Hand Wash
/Quick 30 / Delicate /
Duvet / performs 2 Rinses
are
inoperable.
?
To deactivate Child lock system, press and
hold the Option and Rinse button
2. Rinse+ & Rinse++
?
simultaneously again. (About three seconds)
?
Used to additional rinse, which may assist
in removing traces of detergent residue.
By selecting Rinse+
or
Rinse++ function,
the Rinse Time and the Rinse water
are
increased.
?
To
change
to the desired program, whilst in
3. Rinse Hold
child lock mode.
?
1. Press and hold both
button
Option
together once again.
and Rinse
by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
Is selected
?
To
required lamp
identification.
?
to a drain or
spin, once
the rinse hold function is completed using to
program dial scroll to the required program.
The
proceed through
will light up for
The child lock can be set at any time and it
is automatically canceled when operational
errors occur.
17
H
to
ow
use
Time
washer
Spin
Delay
By pressing the Spin button,
the spin speed can be
?
chosen.
Preparing washing before starting "Time Delay"
Turn on the water tap.
-
-
-
Load
laundry and close the door.
Place the detergent and fabric softener
in
the drawer.
?
-
-
1. Press the Power button.
2. Set the desired
How to set "Time
-
Spin only
Press
button.
3. Press the Start/Pause button.
Delay"
) button.
Power(
Turn the Program dial to select
the program you require.
Press Time Delay button and set the
Press the
("
"
Time
Delay
1. Spin selection
?
Start/Pause(
blinks)
)
If Time
button.
-
pressed, "3:00" is
displayed. The maximum delayed time is
Delay
button is
19:00 hours and the minimum time is 3:00
?
pressing of the
delay by one hour.
To cancel the time
Power(
?
?
Time
)
delay, press the
is
the condition
of water supply and
temperature, the delayed time and the actual
washing time
18
follows.
Synthetic
& Wool/Silk & Hand Wash &
No
-
Spin-400-800-1000
Delicate
Spin-400-800
2. No spin
'expected time' from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
According to
to the
button advances time
button.
Delay
according
Cotton & Cotton-Eco & Quick 30
No Spin-400-800-1000-1200
No
Each
as
is available
Duvet
hours.
?
Spin speed
program
-
?
the
spin
desired time.
-
spin speed by pressing
may vary.
?
If "No
Spin" is selected,
after draining water.
The
required lamp
identification.
will
the washer stops
light up for
ow
H
to
Water
use
washer
Temperature
By pressing
?
the
Dry
Temp.
?
button, the water
temperature can be
selected.
-
?
This
washer-dryer's automatical
process from washing to drying
can be selected easily.
For most even drying make sure
,
all articles in the clothes load
Cold
are
similar in material and thickness.
-30˚C/40˚C/60˚C/95˚C
?
Do not overload
dryer by stuffing
too many articles into drum.
Items must be able to tumble
?
-
Water temperature can be selected
below according to the program.
freely
as
?
Cotton-Eco
?
remember to
the DRY button, you
By pressing
Synthetic
Low
Delicate & Wool/Silk & Quick 30 &
Hand Wash & Duvet
The
required temperature lamp
for identification.
will
For the
more
refer to
the page13.
"
is
displayed.
program can be ended. If you not press
the "Start/Pause" button, the program is
light up
ended after about 4 hours.
"
detailed information, please
Time Save
dry,
"
By pressing the "Start/Pause" button the
"
Cooling Cycle.
1.Drying
?
Automatic
guide
Use your Automatic Cycles to dry most loads.
Electronic sensors measures the temperature of
the exhaust to increase
or
decrease
temperatures for faster reaction
temperature control.
?
This
of
?
To
a
option
can
be used to reduce the time
wash program.
this
use
button
once
option press the Time Save
before the wash program is
started.
?
select
Iron
Temp.
After the end of
?
Cold-30˚C-40˚C
?
can
Time
Very
Cupboard
Cold-30˚C-40˚C-60˚C
-
cycle,
load before
Cotton
Cold-30˚C-40˚C-60˚C-95˚C
-
remove
press the Start/Pause button.
40˚C-60˚C
-
If you open door and
dryer has finished its
This
option is
program.
not available with Quick 30
Recommand Automatic
drying
drying
time and tighter
course as a
kind
of clothes.
a) Synthetic Low Temp.
b) If you want to iron clothes-Iron
c) Cotton Cupboard
d) Diaper Very
NOTE: The estimated drying time varies
from the actual drying time with an Automatic.
-
-
-
The
type of fabric, size of the load, and
dryness selected affect drying time.
the
19
H
2.Drying
?
?
?
to
use
time
guide
ow
washer
By press the Dry button, the
can be selected.
Fiber
drying
time
Drying course can last up to 100min. When
selecting drying only, drying course will
start after spining.
These drying times are given as a guide to
help you set your dryer for manual drying.
Drying times can vary greatly depending on
dampness, room temperature and type of
fabric and your own experience will be your
best guide.
Woolen Articles
-
Woven and
-
Some
Loopknit
Always
drying.
-
Do not overload your
immediately
?
Always
or
can
The Cool Down
?
avoid wrinkles without heat for up to 4
hours.
message will continue to
until the clothes are removed or the
The
?
Start/Pause button is
dryer
pressed.
Door Lock
soon
Leather Materials
clothes and
Night
Gowns
check the manufacture's instructions.
dry any items mode from or
containing rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
Lights
whenever the door of the washer is
locked.
?
The door
can
be unlocked
by pressing the
Start/Pause button to stop the washer.
Do not
20
display
Synthetics
Rubber and Plastics
-
operating periodically
tumbles, rearranges and fluffs the load to
?
Always
form.
check the manufacture's instructions.
Baby
-
"
When you are not remove a loaf of clothes
from the dryer as soon as it stops, wrinkles
after
Take out permanent press articles as
as the dryer stops to reduce wrinkles.
Fiber
-
drying cycle is completed,
[Cool Down] is displayed on the Multi
display.
The Cool Down is setting automatically
when a drying cycle is complete.
and
stretch them out
"
When
?
Materials
loopknit materials may
shrinks, by varying amounts, depending on
their quality.
woven
Permanent Press and
-
3.Completion of Drying
Do not tumble
to their
-
dry fiberglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time
you use the dryer and irri tate your skin.
Do not
-
?
dry woolen articles. Pull them
original shape and dry them flat.
glass
?
The door
can
be
opened after
a
short
delay.
H
ow
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
display
When Child lock is selected, the
lamp is on.
?
"
dry,
"
"
is
displayed.
delay is selected, it shows
remaining times to finish the selected
?
When time
?
the
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
program.
-
-
2. Self
diagnose display
-
?
If the washer encounters
operation,
displayed.
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
a
fault
during
-
the associated fault will be
-
-
:
Water pressure
:
Problem of
:
Door is not closed
:
Over load in motor
sensing
overfilling
:
Over load in motor
:
Water inlet trouble
:
Drainage
:
Unbalanced load
-
error
water
-
-
?
trouble
?
"
"
"
"
:
Water temperature trouble
:
The water
experienced
a
power
failure.
"
"
:
Dry
heater
"
4. Time left
"
After the end of
?
by
manufacturer.
Cotton : around 2 hours and 19 minutes
Cotton-Eco : around 2 hours and 39 minutes
Synthetic
around 1 hour and 22 minutes
:
Delicate : around 1 hour and 4 minutes
Wool/Silk : around 1 hour and 1 minute
Hand Wash : around 52 minutes
Quick 30
:
around 30 minutes
Duvet : around 1 hour and 21 minutes
Drain: around 1 minute
The
washing time may vary by the
amount of laundry, water pressure, water
temperature and other washing conditions.
If
an
suds
unbalanced load is detected
or
if the
program operates, the
wash time may be extended.
removing
(Max. increasing
or
washing
time is
45minutes.)
thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page25 and
follow the guide.
21
aintenance
M
Before
the washer interior,
cleaning
unplug the electrical power cord to avoid
electrical shock to
avoid electrical shock hazards.
When
of the
disposing
lock to prevent young
appliance, cut off the mains cable,
children being trapped inside.
and
destroy the plug
Disable the door
The water inlet filter
"
-"
detergent
-
message will blink
error
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
First drain
filter is clean to
using
objects
ensure
left in the
smooth
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever any threads
or
remove
objects.
draining if the water is hot.
down before cleaning the drain pump, carrying
Be careful when
Allow the water to cool
emptying
1.
opening
or
Open the lower cover
cap ( ) by using a
coin. Drain plug ( )
to pull out the hose.
the door in
2.
an
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
this time
water
use a
flowing
3. Remove out any
At
vessel to prevent
on
to the floor. When
cleaning,
1
2
)to
the
close the lower
100
After
( )
clockwise and insert the drain
the pump filter
open to the left.
( ).
material
turn the pump filter
plug (
( )
foreign
from the pump filter
water does not flow any more, turn
3
22
out emergency
original place.
cover
cap.
aintenance
M
drawer
Dispenser
After
?
?
a
while
detergents
and fabric softeners leave
It should be cleaned from time to time with
If necessary it
can
be removed
a
jet
completely from
by pulling it out.
cleaning, the upper part of the
of
a
deposit
running
in the drawer.
water.
the machine
by pressing
the catch
downward and
?
To facilitate
The drawer
Detergent can
be cleaned
?
The
?
also accumulate inside the
washing
If you live in
seen
with
occasionally
without
cycle
a
can
be removed.
recess
Once you have finished
rinse
fabric softener compartment
recess
old toothbrush.
an
cleaning, replace
the drawer and
run a
laundry.
drum
hard water area, limescale may
and thus not
which should
easily
continuously
build up in
places
where it cannot be
removed.
Over time the build up of scale
clogs appliances,
and if it is not
kept
in check these may have to be
replaced.
?
?
?
Although the washing drum is made of Stainless steel, specks of rust
articles (paper clips, safety pins) which have been left in the drum.
The
washing
If you
use
can
be caused
by
small metal
drum should be cleaned from time to time.
descaling agents, dyes
or
bleaches, make
sure
they
are
suitable for
washing
machine
use.
Descaler may contain chemicals that may
Remove any spots with
Never
use
a
stainless steel
damage part
of your
washing
machine.
cleaning agent.
steel wool.
23
aintenance
M
The water circulation nozzle
?
Clean the water circulation nozzle, if
Cleaning
clogged.
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
Immediately wipe off any spills. Wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
NOTE
Remove hard water
machine.
Winterizing
an area
where
temperatures, follow these instructions
1. Turn off water
4. Add
safe for
washing
freezing
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
Plug
as
instructions
If the washer is stored in
3.
cleaners labeled
deposits using only
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
24
a
expelled.
dry the drum interior, and close the door.
dispenser drawer, drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
upright position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
compartments.
roubleshooting
guide
T
This
washing machine is equipped with automatic safety functions which detect and
diagnose faults at an early stage and react appropriately.
When the machine does not function properly or does not function at all, check the
following points before you contact your service provider.
Possible Cause
Symptom
Rattling
clanking
and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads
a thumping sound.
If sound continues, washer is
probably
out of balance.
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
may produce
This is usually
been removed?
Are all the feet
the
Stop
and
during
installation, refer to Installation guide
resting firmly
on
for
removing
transit bolts.
Wash load may be
distributed
ground?
in drum.
Stop
unevenly
washer and
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent or
detergent may
foaming which
cause
unsuitable
excessive
may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
are
open tap.
Straighten hose(s).
Check the filter of the inlet
clogged.
Water in the washer
does not drain
?
slowly.
or
clogged.
or
?
drains
Drain hose is kinked
The drain filter is
clogged.
Clean and
straighten
hose(s).
the drain hose.
Clean the drain filter.
25
roubleshooting
guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
be plugged in or connection
Solution
Make
fits
plug
sure
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
circuit overload, have
a qualified electrician.
a
by
water
replace fuse.
capacity.
or
supply tap.
on.
Washer won't
Check that the door is
spin
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Once started, the door can not be
opened for safety reasons.
Door does not open
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
Dry problem
?
Does not
dry
removing
Do not overload.
Check that the washer is
properly to
extract
draining
adequate water
from the load.
Clothes load is too small to tumble
property. Add
26
a
few towels.
roubleshooting
guide
T
Possible Cause
Symptom
?
?
?
?
supply is not adequate in area
Water supply taps are not completely
Water
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s)
are
Solution
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose(s).
clogged.
?
?
?
?
?
Drain hose is kinked
The drain filter is
clogged.
clogged.
or
straighten
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
unbalance
an
the drain hose.
Clean the drain filter.
Load is too small.
detection and correction system. If
individual heavy articles are loaded
?
Clean and
or
2 similar items to
help
load to allow proper
(ex.
bath mat, both robe, etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
?
Is the door
or
opend
not completely
Close the door
If
"
completely.
"is not released, call for service.
closed?
Unplug the
?
Water overfills due to the
faulty water
valve.
power
plug
and call for service.
Close the water tap.
Unplug the power plug.
Call for service.
?
?
?
?
Water level
sensor
has malfunctioned.
Over load in motor.
Over load in motor.
The washer
experienced
a
power
Restart the
cycle.
failure.
?
Check water
supply.
Turn the tap on
If"
is not released,
plug and call service.
"
unplug
power
27
T
erms
of Warranty
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by factors
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
other than normal domestic
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
of
product
change
or
by pests for example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
on use
example
water drain
warming beeps.
the installation for
example, levelling
the
product, adjustment of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
?
?
?
Replace fuses
Incidental
example, grit, nails,
in or correct house
Correction of unauthorized
the owner's manual.
/ substances from the machine,
pump and inlet hose filter for
?
by
wiring
or
correct house
plumbing.
repairs.
or
product
the
bra wires, buttons etc.
consequential damage to personal property
possible defects with this appliance.
If this
including
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
28
a
M
emo
29
M
30
emo
Download PDF

advertising