LG | WD-12270BD | LG WD-12270BD Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD(M)-12270BD
WD(M)-12275BD
Thank you for
LG
Fully
buying a
Washing
Automatic
machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Direct Drive
■
System
The advanced Brushless DC motor
belt and
directly
drives the drum without
pulley.
Tilted Drum and Extra
■
Large Door Opening
large opening make it possible
clothing more easily.
Tilted drum and extra
and unload
to load
Water Circulation
■
Spray detergent
Clothes
are
solution and water onto the load
soaked
more
quickly
and
The
detergent suds can be removed
shower during rinse cycle. The water
water and detergent more efficiently.
over
and
over.
thoroughly during
more easily by the
wash
circulation system
uses
cycle.
water
both
RollerJets
■
Washing ball enhances the wash performance and reduces
damage
to the clothing. The jets spray and help tumble clothes to enhance
washing performance while maintaining fabric care.
Built-in Heater
■
Internal heater
temperature
on
automatically heats
selected cycles.
the water to the best
Child Lock
■
The Child lock prevents children from
change the settings during operation.
C
pressing
any button to
ontents
Warnings ...............................................................................................3
Specification..........................................................................................4
Installation .............................................................................................5
Care before
washing ...........................................................................11
Adding detergent.................................................................................12
Function ..............................................................................................13
How to
use
washer .............................................................................14
Maintenance .......................................................................................21
Troubleshooting guide ........................................................................24
Terms of Warranty ..............................................................................27
2
W arnings
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
or injury
precautions, including the following:
store the washer where it will
?
exposed to the weather.
recommended in the user-maintenance
?
?
published user-repair instructions
or
garment manufacturer's wash and
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
?
on,
with,
Do not slam the washer door closed
or
try to
?
inside
To minimize the
possibility of electric shock,
unplug this appliance from the power supply
or
disconnect the washer at the household
distribution
Do not leave the washer door open.
An open door could entice children to
or
or
care
force the door open when locked. This could
result in damage to the washer.
as
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this appliance
is used by or near children.
the door
?
?
out.
play
this or any other appliance.
?
dry articles that have been
or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
that you understand and have the skills to carry
Do not allow children to
?
Do not wash
using
cleaned in, washed in, soaked in,
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
instructions
to persons when
hang
on
crawl inside the washer.
?
Never reach into washer while it is
moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
retardant of fabrics.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
S pecification
Name
Power
supply
:
Front
loading washing
:
220
240V~,50Hz
-
machine
: 686mm(W)×767mm(D)×982mm(H)
Size
Weight: 86kg
: 12kg(2200W)
Wash capacity/Max. Watt
: No spin/400/800/1000/1200
Spin speed
: 89ℓ(7.4ℓ/ kg )
Water consumption
Permissible water pressure : 0.3-10kgf/㎠ (30-1000kPa)
The appearance and
units
may be varied without notice to raise the
specifications
quality.
Accessories
Inlet
4
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin, pay particular
are areas
attention to
is installed
on a
which may be subject to infestation by cockroaches or other
keeping the appliance and its surroundings in clean condition at
all times.
Any damage which may
appliance guarantee.
be
cause
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
?
appliance is fitted
Packing
with transit bolts to
prevent internal damage during transport.
and all transit bolts must be
removed before
using
the washer.
When
unpacking the base, be
remove the additional packing
support in
packing.
sure
to
Washer
the middle of the base
Packing Support
Base
Removing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
are
along
not
with the rubber
removed, it may
2. Unscrew the 4 bolts with
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
cause
vibration, noise and malfunction.
the spanner
Packing
heavy
?
Whenever the
appliance is transported, the
transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation place requirement
Level floor
:
Allowable slope under entire washer is 1˚
Power outlet :
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with more than one
appliance.
Additional Clearance
:
For wall, door and floor
modeling is required.
/2cm:right & left side)
place or store laundry products on top
(10cm
: rear
Do not
of washer at
any times.
They
damage
can
the finish
or
controls.
Positioning
Install the washer
on a
flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
Before placing the washer on tiles, apply a rubber mat under the feet.
?
?
?
?
?
?
Never try to correct any
washer.
unevenness
in the floor with
pieces of wood,
If it is impossible to avoid positioning the washer next to
insulating(686x767x982mm) covered with aluminum foil
between the two appliance.
The washer must not be installed in
rooms
where the
a
cardboard
or
similar materials under the
gas cooker or coal burning stove,an
the side facing the cooker or stove,must be inserted
on
temperature
can
drop
below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.
With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and
clearance of
a
BS
approximately 20mm
is left between the
Plug Safety Details (For
U.K.
top of the washer and the underside of the work-top.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This appliance must be earthed
Green and
Yellow(Earth)
Brown(Live)
E
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
6
I
nstallation
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the manufacturer or its service agents
similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after use.
Connect the machine to an earthed socket in accordance with current wiring regulations.
The appliance must be positioned so that the plug is easily accessible.
2. If the
3.
4.
5.
?
?
?
or
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting
water
supply
hose
▶Water
supply pressure must be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
▶Don't strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 1000kPa, a decompression
device should be installed.
?
Two rubber seals
are
?
?
?
in order to
are
supplied
with the water inlet hoses these
water leaks.
prevent
Check water tightness of washing machine connections by
turning the tap completely on.
Periodically check the condition of the hose and replace the
hose if necessary.
Make sure that there is
no
kink
on
the hose and that it is not
crushed.
▶When your washer has
?
?
two
valves,
The Inlet hose which has red connector is for the hot water tap.
If the washer has two valves, the energy is saved by using hot
valve.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
connector up till the
packing is
3. Push the
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up till
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
3. Connect the
water
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Water
Middle
remove
Guide
hose
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
tap
Horizontal tap
?
Extension tap
Your machine
comes
with
only
cold water connection.
?
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
Square tap
8
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
of suffocation ! Keep all packaging well away from children
Turn off the
Installation of drain hose
?
When
installing the drain hose sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
?
?
?
?
The drain hose should not be
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
nstallation
I
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
appliance
of the
Timber
NOTE
on a
solid and level floor surface,
or
suspended type flooring
excessive vibration and unblance
2. If the floor is uneven,
insert
pieces
Make
sure
NOTE
a
may contribute to
errors.
adjust the adjustable
feet)
that all four feet
are
feet
as
required. (do
not
appliance
stable and
is
resting on the floor and
perfectly
(use a spirit level)
level.
level, tighten the lock nuts
the washer. All lock nuts must be tightened.
After the
in
of wood etc. under the
then check that the
※
preferably
room.
washer is
In the
case
platform,
up towards
of the
that the
washing machine is installed
securely fastened in order
risk that it might fall off.
base
on a
of
raised
it must be
to eliminate the
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
Tile floors
on a
on
sections and stick the
Tread Mate is
※
be
clean, dry and level.
(Slippery floors)
Position each foot
?
must
flat hard floor.
a
the Tread Mate and level the machine
pieces
on
to
the
dry tile where
self adhesive material used
on
to suit.
machine is
to
(Cut Tread
be
Mate into 70x70
placed.)
ladders & steps that prevents
slipping.
Wooden floors
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups
?
?
at
If
?
least 15mm thick under the
possible
washer,
install the washer in
one
secured
of the
corners
※
Insert the rubber cups to reduce vibration.
※
You
can
obtain the rubber cups
to at
Rubber
under each
foot,
least 2 floor beams with
of the
room,
screws.
where the floor is
(p/no.4620ER4002B) from
Cup
more
the LG spares
stable.
dept.
Important!
?
?
?
?
?
Proper placement and levelling of the washer ensure long,regular and reliable operation.
must be absolutely horizontal and stand firmly in position.
The washer
It must not "Seesaw" across corners under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
10
mm
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C,
clothing.
a
without
This will
remove
add
a
half load of
allow the unit to wash
detergent)
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that
can
be washed with the
same
wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
3.
causing discoloration of white
lightly soiled one.
can occur
soiled items with
Color
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Separate
Separate
Lint
Wash lint
Caring
before
etc. If
possible, do
clothes
according
not wash
heavily
to amount of soil.
white fabrics from colored fabrics.
producers and
separately.
lint collectors
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all pockets to make sure
they are empty. Items such
that
as
nails, hair clip, matches, pens,
coins and
keys
can
damage
both
your washer and your clothes.
?
Close zippers, hooks and strings to
make sure that these items don't
snag
?
on
other clothes.
Pre treat dirt and stains
a
little
by brushing
detergent dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
?
If too
much
can occur
result
?
?
Main wash
only
U
?PreWash+MainWashU
2.
?
Adding Fabric Softener
heavy load to the
malfunction)
or cause
(Causing
?
detergent is used, too many suds
and this will decrease the washing
a
If suds occur too much, pleas
detergent amount.
motor.
reduce the
Use powder detergent only for the front
loading washer.
Detergent usage may need to be adjusted
for water temperature, water hardness,
size and soil level of the load. For best
results, avoid oversudsing.
Tips
Full load
?
Overfilling
can cause
according
:
to
manufacturer's recommendation.
Do not exceed the maximum fill line.
Part load
early dispensing
:
3/4 of the normal amount.
Minimum load
of the fabric softener which could stain
:
1/2 of full load.
clothes.
?
?
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
?
2
days.
Softener will automatically be added
during the last rinse cycle.
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the cloths
directly
12
Detergent is flushed from the dispenser
beginning of the cycle.
the
at
unction
F
Recommended
Energy
courses
label data based
Fabric
Program
Cotton
according
on
to the
program cotton
Proper
Temp.
(Option)
Type
Color fast garments
is the
in Cotton.
Wool/Silk
Hand
Wash
Quick 30
60˚C
(Cold, 40˚C)
"Hand Wash" marked
delicate and wool laundry.
(30˚C,40˚C)
Colored Landry which
is lightely soiled fast.
(Cold, 40˚C)
Water
with
light filling.
Temperature
:
Rating
139
Rating
159
5.0kg
82
4.0kg
64
3.0kg
61
3.0kg
52
5.0kg
30
Bio
Soak
Pre Wash
Rinse+Spin
Spin Only
30˚C
30˚C
Cold
Rinse+Spin
Spin Only
30˚C
filling,
duvet, pillow, blanket, sofa
cover
in
Minutes
30˚C,60˚C)
Machine washable woolens
with pure new wool only.
with
Time
40˚C
(Cold, 40˚C)
bedding
Load
(Cold,
Delicate laundry easily
damaged.
Cotton
Duvet
95˚C)
(40˚C)
Synthetic Polyamide, Acrylic,
Polyester.
Delicate
Maximum
Option
(Cold,
30˚C, 40˚C,
Laundry type
same
EN60456.
60˚C
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton (underwear...)
Cotton-Eco
laundry type
60˚C, tested in accordance with
30˚C
1
(Cold, 40˚C)
king size
(9 Tog)
81
Select the water temperature to the wash cycles.
manufacture's care label or instructions when
Always follow garment
laundering.
Bio
:
If you want to eliminate protein stains (milk, blood,
function by pressing the option button.
chocolate...),
you may select Bio
can only select Bio function when temperature is higher than 60˚C in
Cotton, Cotton-Eco and and Synthetic.
NB. You
13
H
ow
to
use
washer
Bio
1. Cotton
selected upon power
?
?
?
Press the
Power(
Press the
Start/Pause(
) button
Initial condition
-
Wash
:
Main wash
-
Rinse
:
3 times
-
Water temperature
Program : Cotton
14
on.
to start.
) button.
?
?
:
60˚C
Press the
Selecting
Power(
) button
to start.
Select the conditions which you want to
use, by pressing each button.
For
selecting the each conditions, please
refer to the page15~page20
?
-Spin:800rpm
-
2. Manual
automatically
Press the Start/Pause button.
H
(1)
(2)
(3)
(4)
ow
Button
Dial
:
:
to
use
washer
Power
(5)
(6)
(7)
(8)
Program
Button
:
Start/Pause
Button
:
Option
Child lock
Button
:
Rinse
Button
:
Button
:
Spin
Temperature
(9) Button : Beeper
(10) Button : Time Save
(11) Button : Time Delay
Power
Program
1. Power
?
Press the
Power(
on
and off.
power
?
)
(Program)
button to turn
?
To cancel the Time Delay function, the
Power( ) button should be pressed.
9 programs
2. Initial Program
-
Cotton
-
Cotton-Eco
-
?
When the Power(
) button is pressed,
the washer is ready for Cotton program.
And the other initial conditions as follows.
-
-
?
?
So, if you
want to advance into the
washing cycle without changing the
)
program, just press Start/Pause(
button and then the washer will proceed.
Initial program
-Cotton Program / Main Wash /
Normal Rinse / 800 rpm / 60˚C
are
available
according
to the
laundry type.
-
-
Synthetic
Delicate
Hand Wash
Quick 30
-
Duvet
-
Drain
Wool/Silk
Lamp
will
light
up to indicate selected
program.
?
When
Start/Pause(
)
the Cotton program is
-
button is
pressed,
automatically selected.
By turning the Program dial, the program is
selected in order of "Cotton
Synthetic
Quick 30
-
-
Delicate
Duvet
-
-
-
Cotton-Eco
Wool/Silk
-
-
Drain".
Regarding to the laundry type for each program
Please refer to the page13.
15
H
ow
to
use
washer
Start/Pause
Option
By pressing the option
one option
?
button, only
function be selected.
1. Start
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
cycle.
2. Pause
?
?
If temporary stop of wash cycle is needed,
press "Start/Pause" button.
1. Bio
If you want to eliminate
?
protein stains(milk,
blood, chocolate...), you may select Bio
function
When in Pause, the power is turned off
automatically after 4 minutes.
by pressing
NB. You
can
the
option
button.
select Bio function when
temperature is higher than 60。C in Cotton,
Cotton-Eco and
Synthetic.
2. Soak
Use this mode to wash normal clothes
?
and
heavy
clothes which
are
Available in Cotton, Cotton-Eco and
?
or
thick
excessively dirty.
Synthetic.
3. Pre Wash
?
Use this
option
for load that need
pretreatment. Add
17 minutes for pre wash
and drain.
-
When
using Pre Wash option, do
liquid detergent in the main wash
comparment. Use powder for the
not use
main
wash.
?
Available in Cotton, Cotton-Eco and
Synthetic.
4. Rinse+Spin
?
Use this
5.
?
16
option
to rinse and then
spin.
Spin Only
When you want
spin only,
select this
option.
H
ow
to
use
washer
Child lock
Rinse
?
By pressing the Rinse
button, the Rinse type
can
be selected.
?
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
?
Child lock
Option
can
be set
by pressing and holding the
simultaneously.
and Rinse button
1. Normal
?
Cotton-Eco / Cotton /
Synthetic performs 3
Rinses
?
?
When child lock is set, all buttons
Wool/Silk / Hand Wash
/Quick 30 / Delicate /
Duvet / performs 2 Rinses
are
inoperable.
?
To deactivate Child lock system, press and
hold the Option and Rinse button
2. Rinse+ & Rinse++
?
simultaneously again.
Used to additional rinse, which may assist
removing traces of detergent residue.
in
?
By selecting Rinse+
or
Rinse++ function,
the Rinse Time and the Rinse water
are
increased.
?
To
change
to the desired program, whilst in
3. Rinse Hold
child lock mode.
?
1. Press and hold both
button
Option
together once again.
and Rinse
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
?
Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
To
proceed through
to a drain or
program dial scroll to
The
required lamp
identification.
?
spin, once
completed using to
the required program.
the rinse hold function is
will light up for
The child lock can be set at any time and it
is automatically canceled when operational
errors occur.
17
to
ow
H
use
Time
washer
Spin
Delay
?
By pressing the Spin button,
speed can be
the spin
chosen.
Preparing washing before starting "Time Delay"
Turn on the water tap.
-
-
-
Load
laundry and close the door.
detergent and fabric softener
Place the
in
the drawer.
?
How to set "Time
-
-
-
Press
1. Spin selection
?
Delay"
) button.
Power(
Program dial to select
the program you require.
Press Time Delay button and set the
Turn the
program
-
-
desired time.
-
Press the
("
"
Time
Delay
Spin speed
)
button.
Synthetic
No
-
pressed, "3:00" is
Delay
displayed. The maximum delayed time is
hours.
?
pressing of the
delay by one hour.
Each
To cancel the time
Time
or
?
)
button advances time
delay, press the
'expected time' from the
completion of washing cycle
selected process (Wash, Rinse, Spin).
is
to the
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time
18
Spin-400-800-1000
Delicate
Spin-400-800
may vary.
If "No
after
The
button.
Delay
present
& Wool/Silk & Hand Wash &
2. No spin
?
Power(
?
to the
button is
19:00 hours and the minimum time is 3:00
?
according
follows.
Duvet
Start/Pause(
blinks)
If Time
is available
Cotton & Cotton-Eco & Quick 30
No Spin-400-800-1000-1200
No
?
as
Spin" is selected,
draining water.
required lamp
identification.
will
the washer stops
light up for
H
ow
to
use
washer
Beeper
Water Temperature
?
By pressing the Temp.
High
button, the water
temperature can be
Low
?
selected.
-
Press the
Beeper button
repeatedly to adjust the
volume of the Beeper.
(High/Low/Off)
Off
Cold
-30˚C/40˚C/60˚C/95˚C
Beeper
?
-
Water temperature can be selected
below according to the program.
as
Time Save
Cotton-Eco
40˚C-60˚C
-
Cotton
Cold-30˚C-40˚C-60˚C-95˚C
-
Synthetic
?
Cold-30˚C-40˚C-60˚C
This
of
-
Delicate & Wool/Silk & Quick 30 &
Hand Wash & Duvet
?
To
a
option
this
use
button
Cold-30˚C-40˚C
can
be used to reduce the time
wash program.
once
option press the Time Save
before the wash program is
started.
The
required temperature lamp
for identification.
For the
more
refer to
the page13.
will
light up
Door Lock
detailed information, please
?
Lights
whenever the door of the washer is
locked.
?
The door
can
be unlocked
by pressing the
Start/Pause button to stop the washer.
?
The door
can
be
opened after
a
short
delay.
19
ow
H
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
display
When Child lock is selected, the
lamp is on.
?
"
washing
"
"
4. Time left
delay is selected, it shows
remaining times to finish the selected
When time
?
the
?
program.
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
2. Self
diagnose display
-
-
?
If the washer encounters
operation,
displayed.
a
fault
during
-
the associated fault will be
-
-
"
"
:
Water pressure
sensing
"
:
Problem of
overfilling
water
-
"
"
:
Door is not closed
-
"
"
:
Over load in motor
-
"
"
"
"
"
"
:
Over load in motor
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
Water temperature trouble
:
The water
?
"
"
"
"
"
"
trouble
experienced
Cotton : around 2 hours and 19 minutes
Cotton-Eco : around 2 hours and 39 minutes
Synthetic
:
around 1 hour and 22 minutes
Delicate : around 1 hour and 4 minutes
Wool/Silk : around 1 hour and 1 minute
Hand Wash : around 52 minutes
Quick 30
:
around 30 minutes
Duvet : around 1 hour and 21 minutes
Drain: around 1 minute
The
washing time may vary by the
laundry, water pressure, water
temperature and other washing conditions.
amount of
a
power
failure.
If these error letters are displayed, please
refer to the troubleshooting page26 and
follow the guide.
20
manufacturer.
error
-
"
by
?
If
an
unbalanced load is detected
or
suds
if the
removing program operates, the
wash time may be extended.
(Max. increasing
time is
45minutes.)
aintenance
M
Before
cleaning the washer interior, unplug
the electrical power cord to avoid electrical shock to
avoid electrical shock hazards.
When
of the
disposing
appliance, cut off the mains cable,
being trapped inside.
and
destroy the plug
Disable the door
lock to prevent young children
The water inlet filter
"
-"
-
message will blink
error
detergent
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the filter
CAUTION
First drain
is clean to
using
objects
ensure
left in the
smooth
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever any threads
or
remove
objects.
draining if the water is hot.
down before cleaning the drain pump, carrying
Be careful when
Allow the water to cool
emptying
1.
opening
or
Open the lower cover
cap ( ) by using a
the door in
2.
this time
plug ( )
water
pull
out
the hose.
use a
flowing
out emergency
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
to
an
3. Remove out any
At
vessel to prevent
on
to the floor. When
cleaning,
material
After
( )
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
( )
( ).
turn the pump filter
water does not flow any more, turn
open to the left.
foreign
from the pump filter
original place.
cover
cap.
3
100
1
2
21
aintenance
M
Dispenser drawer
After
?
?
a
while
and fabric softeners leave
detergents
a
deposit
in the drawer.
It should be cleaned from time to time with
If necessary it
can
be removed
a jet of running water.
completely from the machine by pressing
by pulling it out.
cleaning, the upper part
the catch
downward and
?
To facilitate
The drawer
Detergent
can
be cleaned
?
cycle
The
?
also accumulate inside the
seen
with
occasionally
without
washing
If you live in
a
can
be removed.
recess
Once you have finished
rinse
of the fabric softener compartment
recess
old toothbrush.
an
cleaning, replace
the drawer and
run a
laundry.
drum
hard water area, limescale may
and thus not
which should
easily
continuously
build up in
places where
it cannot be
removed.
Over time the build up of scale
clogs appliances,
and if it is not
kept
in check these may have to be
replaced.
?
?
?
Although the washing drum is made of Stainless steel, specks of rust can
articles (paper clips, safety pins) which have been left in the drum.
The
washing
If you
use
be caused
descaling agents, dyes
or
bleaches, make
Descaler may contain chemicals that may
Remove any spots with
22
use
small metal
drum should be cleaned from time to time.
sure
they
are
suitable for
washing
use.
Never
by
steel wool.
a
stainless steel
damage part of your washing
cleaning agent.
machine.
machine
aintenance
M
The water circulation nozzle
?
Clean the water circulation nozzle, if
Cleaning
clogged.
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
NOTE
Remove hard water
machine.
Winterizing
deposits using only cleaners labeled
an area
where
freezing
may
temperatures, follow these instructions to prevent
1. Turn off water
4. Add
washing
occur or
damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
Plug
safe for
instructions
If the washer is stored in
3.
as
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
dispenser
8. Store washer in
9. To
remove
through
a
an
dry
to drain out all water.
expelled.
the drum interior, and close the door.
drawer, drain and
dry excessive
water from the
compartments.
upright position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
T roubleshooting guide
This
washing machine is equipped with automatic safety functions which detect and
diagnose faults at an early stage and react appropriately.
When the machine does not function properly or does not function at all, check the
following points before you contact your service provider.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
If not removed
been removed?
Are all the feet
the
out of balance.
Stop
and
redistribute wash load.
Have all the transit bolts and
packing
If sound continues, washer is
probably
during
installation, refer to Installation guide
resting firmly
on
for
removing
transit bolts.
Wash load may be
distributed
ground?
in drum.
Stop
unevenly
washer and
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent
detergent may
foaming which
or
cause
unsuitable
excessive
may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
are
open tap.
Straighten hose(s).
Check the filter of the inlet
clogged.
Water in the washer
does not drain
?
?
drains
24
slowly.
Drain hose is kinked
or
clogged.
or
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter.
hose(s).
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
by a qualified electrician.
on water supply tap.
Turn
on.
Washer won't
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
T roubleshooting guide
Possible Cause
Symptom
?
?
?
?
Water
Water
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s)
are
Solution
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet
hose(s).
clogged.
?
?
?
?
?
Drain hose is kinked
Clean and
The drain filter is
Clean the drain filter.
or clogged.
clogged.
straighten the
Load is too small.
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
unbalance
detection and correction system. If
individual heavy articles are loaded
or
drain hose.
2 similar items to
help
load to allow proper
(ex. bath mat, both robe, etc.), this
system may stop spinning or even
?
interrupt the spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
?
Is the door
or
not
opend
completely
Close the door
If"
completely.
"is not released, call for service.
closed?
Unplug the
power
plug
service.
?
Water overfills due to the
faulty water
valve.
?
?
?
?
Water level
has malfunctioned.
Call for service.
Over load in motor.
Over load in motor.
The washer
failure.
26
sensor
Close the water tap.
Unplug the power plug.
experienced
a
power
Restart the
cycle.
and call for
T
erms
of Warranty
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by factors
use
the
product.
other than that shown
misuse
or
the
on
Act of God.
other than normal domestic
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
of
product
change
or
by pests for example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
on use
example
water drain
warming beeps.
the installation for
example, levelling
the
product, adjustment of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
?
?
?
Replace fuses
Incidental
example, grit, nails,
in or correct house
Correction of unauthorized
the owner's manual.
/ substances from the machine,
pump and inlet hose filter for
?
by
wiring
or
correct house
or
product
the
plumbing.
repairs.
consequential damage to personal property
possible defects with this appliance.
If this
including
bra wires, buttons etc.
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
27
a
P/No.: 3828ER3040F
Download PDF

advertising