LG | WD-1285FD | LG WD-1285FD Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD-1080F(H)D
WD-1280F(H)D
WD-1480F(H)D
/
WD-1085F(H)D
WD-1285F(H)D
/ WD-1485F(H)D
/
WD-1288FHD / WD- 1488FHD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
n
40%
Jumbo drum
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
n
More economical
Intelligent
Wash
by Intelligent
System
Wash
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
n
Direct Drive
water level and
consumption.
System
The advanced Brushless DC motor rotates the Drum
without belt and
n
Wash
Child-Lock
The Child-Lock
Rinse
pressing
n
system has been used
any button to
Low noise
speed
change
control
to
prevent children from
the program
during operation.
system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
n
directly
pulley.
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
Do not install
be
?
?
or
store the washer where it will
?
exposed to the weather.
Do not
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
instructions
or
published user-repair
instructions
?
that you understand and have the skills to carry
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this
is used
by
or near
Do not wash
or
dry
articles that have been
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
in, washed in, soaked in,
or
on,
with,
this or any other
Do not leave the washer door open.
An open door could entice children to
or
appliance
or
?
inside
?
Never reach into washer while it is
?
The
hang
can
try to
To minimize the
this
possibility of electric shock,
appliance from the power supply
or
disconnect the washer at the household
on
?
moving.
completely stopped.
laundry process
retardant of fabrics.
or
distribution
crawl inside the washer.
until the drum has
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
unplug
play
appliance.
the door
?
children.
Do not allow children to
?
using
instructions.
out.
?
to persons when
combustible
recommended in the user-maintenance
?
injury
cleaned
Do not
or
or
washer, follow basic precautions, including the following:
Wait
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
pecification
S
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
or its service agents
similarly qualified person in
Drawer
or a
(For detergent and
fabric softener)
order to avoid
Control
a
hazard.
panel
Drain hose
Door
Lower
cover
Drum
Adjustable
Drain pump filter
Lower
Drain
Name
n
Power
supply
:
Front
loading washing
:
220
240V~,50Hz
600mm(W)
65kg
7kg
Size
:
Weight
Wash capacity
:
n
Max. Watt
:
n
Spin speed
:
n
n
cover
cap
plug
n
n
feet
:
-
machine
600mm(D)
850mm(H)
2100W
No
spin/400/600/800/1000[WD-1080F(H)D)/1085F(H)D)]
spin/400/800/1000/1200[WD-1280(5)F(H)D/1288FHD]
No spin/400/800/1000/1400[WD-1480(5)F(H)D/1488FHD]
No
n
Water
n
Permissible water pressure
The appearance and
n
:
(10.7
0.3-10kgf/
specifications
/kg)
(30-1000kPa)
may be varied without notice to raise the units
Accessories
Inlet
4
:75
consumption
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
quality.
nstallation
I
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Install
Transit bolts
n
The
appliance
is fitted with transit bolts to
Removing
n
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
along
with the rubber
vibration,
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
not removed, it may cause
noise and malfunction.
are
3. Take out the 4 bolts
heavy
?
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
n
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
under entire washer is 1˚
slope
Power outlet
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with
than
Laundry
one
Additional Clearance :
For wall, door and floor modeling is
(10cm : rear /2cm:right & left side)
Tub
approx.
2cm
Do not
more
appliance.
place
or
store
required.
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
8
600
n
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
identifying
letter E
or
by
the earth
symbol (
)
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
n
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
2. If the
3.
4. Connect the machine to
5. The
n
appliance
Washing
must be
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Machine is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
n
Connecting
water
hose
supply
Water
supply pressure must be between
(0.3~10kgf/cm2)
30kPa and 1000kPa
Don't
strip or crossthread when connecting
Inlet hose to the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the
completely
?
tap
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Hot water
Hot(option)
on
the
When your washer has two valves,
tap
Cold
Cold
Make sure that there is no kink
hose and that it is not crushed.
?
water
tap
?
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
n
Tap without
Normal
1. Unscrew the fixing
attach the tap.
screw
thread &
2.
to
screw
type inlet hose
Push the connector up till the
rubber
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
n
Tap without
Normal
1. Untighten the upper
thread &
connector
2.
touch
one
packing
contact with the
Upper
Rubber
Connector
Fixing
tighten
packing
screw
type inlet hose
Push the upper connector up till
the rubber
screw.
Middle
the 4
Rubber
connector
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
tap is
Connector
Water
hose
Middle
guide plate.
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
tap. Then pull the
down, pushing the
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
I
n
nstallation
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
ca.
105
When
installing the drain hose sink,
it tightly with a string.
secure
cm
?
Proper securing the drain hose will protect
damage due to water
leakage.
the floor from
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
100cm
min. 60cm
max.
ca.
?
than 100
Proper securing
protect
water
?
cm
min.60cm max.10cm
cm
The drain hose should not be
higher
?
105
placed
?
above the floor.
the drain hose will
the floor from
damage
due to
leakage.
When the drain hose is too
When
strap
max.
100cm
min. 60cm
installing the drain hose sink,
it tightly with a string.
secure
?
Proper securing the drain hose will protect
damage due to water
leakage.
the floor from
long, please
don't fill into the washer. This will
cause
abnormal noise.
9
I
n
nstallation
Level
adjustment
1.
the
a
prevents
excessive noise and vibration.
Install the
floor
the
washing
machine
Leveling
appliance
on a
properly
solid and level
surface, preferably in
of
a corner
room.
2. If the floor is uneven, adjust the
adjustable feet as required. (do not
insert
pieces
Make
sure
of wood etc. under the
that all four feet
are
feet)
stable
and
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
that the
a
Adjustable
Higher
Adjustable
feet
Lower
feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
move
the
up and down at
(Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feets again.
all.
10
C
n
before
are
Caring
before
washing
washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always
transfer
sort dark colors from
soiled items with
Soil
3.
Caring
n
before
colors and whites. Wash
separately as dye and lint
possible, do not wash heavily
one.
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
pale
discoloration of white etc. If
causing
lightly soiled
can occur
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all the
that
as
pockets
to make sure
empty. Things such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hook and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
dding detergent
A
n
Adding detergent
1. The
Dispenser
and fabric softener
3. Detergent dosage
Drawer
?
The
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
used more than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
(Causing
a
detergent only for the front
washer.
Detergent
for water
?PreWash+MainWashU
motor.
usage may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the cloths
directly
12
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
at
unction
F
n
Recommended
label data based
Energy
※(
)
:
on
WD-1080(5)F(H)D
Fabric
Program
Cotton
according
courses
to the
laundry type
program cotton 60˚C, tested in accordance with EN60456.
/
1280(5)F(H)D
/ 1288FHD
Proper
Temp.
(Option)
Type
Color fast garments
Cotton-Eco
Laundry type
is the
60˚C
in Cotton.
(40˚C)
Delicate
Wool
Hand
Wash
Quick 30
(Cold,
Main+(Pre)
30˚C,60˚C)
Delicate laundry easily
30˚C
damaged.(silk, curtains...) (Cold, 40˚C)
Main
Machine washable woolens
with pure new wool only.
(Cold, 40˚C)
Main
"Hand Wash" marked
delicate and wool laundry.
(30˚C,40˚C)
Laundry type
is the
in Cotton and
Synthetic.
Pre Wash
:
If the
laundry
"Pre Wash"
30˚C
Cold
same
is
30˚C
(Cold, 40˚C)
Temperature
:
in
Liter
KWh
Minutes
7.0kg
75
1.33
163(159)
5.0kg
65
1.24
163(159)
2.0kg
52
1.2
153(149)
7.0kg
75
1.4
178
5.0kg
65
1.2
178
2.0kg
48
1.0
163
4.0kg
60
0.5
2.0kg
48
0.4
3.0kg
60
0.5
1.0kg
48
0.3
2.0kg
52
0.3
1.0kg
48
0.2
Main
2.0kg
52
0.03
1.0kg
48
0.01
Main
5.0kg
48
0.3
2.0kg
40
0.2
92
67
61
60
30
heavily soiled,
course
is effective.
Pre Wash is available in
Water
Main+(Pre)
40˚C
Synthetic Polyamide, Acrylic,
Polyester.
in
(Option)
60˚C
same
Energy
in
Load
(Cold,
(shirts, night dresses,
Main+(Pre)
pajamas...)and lightly soiled 30˚C, 40˚C,
95˚C)
white cotton (underwear...)
Time
Water
Washing
Cotton-Eco, Cotton, Synthetic program.
temperature to the wash cycles. Always follow garment
Select the water
manufacture's
care
label
or
instructions when
laundering.
13
ow to use
H
washer
Delicate
Wool
Synthetic
Cotton
Quick 30
program
Power
use
Start/Pause
in the initial
To start press the
Power(
)
Press the Start/Pause button.
?
Initial condition
-
Wash
:
Only main
-
Rinse
:
3 times
-
-
800
40
Pre Wash
Super
400
30
Main Wash
Normal
No
Cold
Wash
Rinse
3.
The
?
The
wash
Water temperature
Beep
Also the
:
60˚C
on/off function
can
be set at
Beep
on/off function works
4. Auto half load.
Program : Cotton
Selecting
To start press the
Power(
) button.
Select the conditions which you want to
use, by pressing each button.
For selecting the each conditions, please
refer to the page15~page20
?
Beep on/off function can be set by
pressing and holding the Spin and
Temp. button simultaneouly.
when power is off.
?
?
Temp.
Spin
any time and it is automatically canceled
when power failure occur.
Spin : 1400 rpm (1200 rpm, 1000 rpm)
2. Manual
?
Spin
Beep on/off
?
button.
?
-
60
Rinse Hold
Delay
(Cotton)
program
?
95 C
1000
Hand Wash
Cotton-Eco
1. For
1400
Time
Time Save
Press the Start/Pause button.
14
Auto half load
saves you time and
when
money
washing smaller loads.
The washing machine is fitted with a self
adjusting
?
water level
system.
This system enables the machine to use
the amount of water needed to wash
and rinse the
particular
laundry
load.
in relation to the
H
ow to use
washer
Delicate
Wool
Synthetic
Cotton
Cotton-Eco
Quick 30
program
Power
(1)
(1)
(2)
(3)
(4)
Button
Dial
:
:
Time
Time Save
Hand Wash
Start/Pause
(2)
Power
Program
Button
:
Start/Pause
Button
:
Time Save
Button
(5)
(6)
(7)
(8)
Pre Wash
Super
Main Wash
Normal
Wash
(4)
(3)
(6)
(7)
(8)
Rinse
Button
:
Time
60
800
40
400
30
Cold
Spin
Temp.
(9)
(10)
Button
(9)
(10)
Child lock
:
95 C
1000
Spin
Wash
Button
1400
No
Rinse
(5)
:
Delay
Rinse Hold
Spin
:
Button
:
Water
Delay
Power
Program
?
7 programs
are
available
according
laundry type.
Power
1. Power
-
Cotton-Eco
-
Cotton
-
-
?
Press the
Power(
on
and off
power
?
To cancel the Time
can also be used.
2. Initial
?
?
)
button to turn
-
-
Delay function,
it
Program
When the Power( ) button is pressed, the
washer is ready for Cotton program. And
the other initial conditions as follows.
So, if you
?
[WD-1480(5)F(H)D / 1488FHD]
-Cotton Program / Main wash /
?
[WD-1280(5)F(H)D / 1288FHD]
-Cotton Program / Main Wash /
Normal Rinse / 1400 rpm / 60˚C
Normal Rinse / 1200 rpm / 60˚C
?
-
?
Wool
Synthetic
Cotton
Hand Wash
Cotton-Eco
Quick 30
Delicate
Wool
Hand Wash
program
(Program)
Quick 30
Program
When Start/Pause button is
Cotton-Eco program is
selected.
-
to the
Delicate
Synthetic
1.
want to advance into the
washing cycle without selecting the
program, just press Start/Pause button
and then the washer will proceed.
Initial program
Temp.
pressed,
automatically
By turning the Program dial, the program is
selected in orders of "Cotton-EcoU Cotton
U
Synthetic
Hand Wash
U
U
Delicate
U
Wool
U
Quick 30".
Regarding to the laundry type for each program
Please refer to the page13.
2. Course
-
Cotton-Eco
-
-
Cotton
-
-
-
Synthetic
-
Wool
Hand Wash
Quick 30
Delicate
[WD-1080F(H)D / 1085F(H)D]
-Cotton Program / Main Wash /
Normal Rinse / 1000 rpm / 60˚C
15
H
ow to use
washer
Start/Pause
Time Save
Time Save
Start/Pause
1. Start
?
1. Time Save
This Start/Pause button is used to start
wash
cycle
or
pause the
?
cycles.
2. Pause
?
This
option
of
wash program.
To
a
?
If
temporary stop of wash cycle is needed,
press "Start/Pause" button.
?
After the pause button is pressed, the
power is turned off automatically 4 minutes
later.
16
this
use
button
can
be used to reduce the time
press the Time Save
before the wash program is
option
once
started.
?
This
option
program.
is not available with Quick 30
ow to use
H
washer
Child lock
Wash
By pressing
?
Pre Wash
the Wash
button, the wash type
Main Wash
can
Wash
be selected.
-
Main Wash
-
Pre Wash
+
Wash
If you want to lock all the buttons to prevent
a child or infirm persons, this
Main Wash
operation by
function
1. Main Wash
?
Main Wash
course
?
If the
laundry
Main Wash"
?
is
+
is available for
lightly
or
?
turns on,
be set
can
by pressing and holding the
simultaneously.
"Pre Wash
Wash
+
Rinse
is effective.
?
Synthetic program.
If lamp
Child lock
Wash and Rinse button
Pre Wash is available in Cotton-Eco, Cotton
and
be used.
Main Wash
heavily soiled,
course
can
1. Child lock
normally soiled laundry.
2. Pre Wash
Rinse
that function has been
?
selected.
When child lock is set, all buttons
inoperable.
To deactivate Child lock system, press and hold Wash
and Rinse button simultaneously again.
Wash
?
are
Rinse
If you want to
lock is active,
change the
program when Child
1. Press and hold both Wash and Rinse button
together.
2. Press the Start/Pause button.
3.
Change the desired program
and press the
Start/Pause button.
Change
the desired
Wash
?
Rinse
The child lock
Start/P
can
program
Start/P
be set at any time and it is
automatically canceled when operational
occur.
errors
Also Child lock works when power is off.
17
ow to use
H
washer
Rinse
Rinse Hold
Time
By pressing
?
the Rinse
Super
button, the Rinse type
Normal
be selected.
-
-
-
Rinse
-
Time
can
Delay
Super
Normal
+
Rinse Hold
1. Time
Super + Rinse Hold
Delay
Preparing washing before starting
"Time
Delay"
-
Cotton-Eco / Cotton / Synthetic performs 3
-
Rinses
-
?
Time
Delay
Normal
1. Normal
?
Delay
Wool / Hand Wash
/Quick
Turn
on
the water
tap.
Load
laundry and close the door.
Place the detergent and fabric softener
in
the drawer.
30 / Delicate
performs 2 Rinses
?
2.
Super
How to set "Time
-
-
?
Normal
?
Use the
+
1
more
rinse time.
-
Super
rinse when additional
rinsing is desired to remove
and detergent soiled loads.
excess
desired time.
dirt
-
?
3. Rinse Hold
?
hold
?
getting wrinkled, you may select
by pressing the Rinse button.
rinse
If you want to drain and spin, when Rinse
Hold function is proceed, Press the
Press the
spin speed or program.
Start/Pause button again to start
?
?
only,
select the No
Spin
program.
18
turns on,
Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
Each pressing of the
delay by one hour.
To cancel the time
?
Time
that function has been selected.
?
)
button advances time
delay,
press the
button.
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
present
or
If you want to drain
If lamp
If Time
Power(
program.
?
button.(":" blinks.)
hours.
Start/Pause button to cancel the Rinse Hold
function and select
Press the Start/Pause
19:00 hours and the minimum time is 3:00
If you desire to leave fabrics in the machine
without spinning after rinse to prevent them
from
Delay"
Power( ) button.
Turn the Program dial to select
the program you require.
Press Time Delay button and set the
Press
is
to the
selected
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time
may vary.
H
ow to use
washer
Spin
2. No
1000
1200
1400
800
1000
1000
600
800
800
400
400
No
No
Spin
?
Spin
If "No
after
It is
400
No
Spin" is selected,
draining water.
possible to
Spin
Spin
Spin
[WD-1280(5)F(H)D/
1288FHD]
can
the
the
Spin button,
spin
-
-
600
-
800
-
800
-
800
-
1000
-
1000
-
1000
-
1200
-
1400
Cold
to the program
?
Cotton-Eco
-
-
(1200)U (1400)U
No
SpinU
400U
(600)
Cotton
-
[WD-1480(5)F(H)D / 1488FHD]
1400U NoSpinU 400U 800U 1000
[WD-1280(5)F(H)D / 1288FHD]
1200U NoSpinU 400U 800U 1000
[WD-1080F(H)D / 1085F(H)D]
1000U NoSpinU 400U 600U 800
-
-
-
according
(600) U
800 U 1000 U No
can
be selected
as
to the program.
Cotton-Eco
60˚C U 40˚C
Cotton
60˚CU 95˚CU ColdU 30˚CU 40˚C
Synthetic
U
60˚C
U
Cold
U
30˚C
Delicate & Wool & Quick 30
30˚C U 40˚C U Cold
Hand Wash
U
For the
NoSpin
30˚C
U
40˚C
temperature's lamp turns
more
detailed
on.
information, please refer
to the page13.
Wool / Hand Wash
400U
-
Temp
Temperature
temperature
Cold
NoSpinU 400U(600)
800U
the
Cold
below
Selected
(600)U
-
Water
40˚C
-
Delicate
400U
-
-
Synthetic
800U 1000U
By pressing
selected.
30
1. Water
according
Temp.
Temp.
Spin selection
800U 1000U
the
-30˚C/40˚C/60˚C/95˚C
400
rpm is available
follows.
40
-
-
Spin
the
on
button, the water
temperature can be
60
400
as
?
95 C
[WD-1480(5)F(H)D
/1488FHD]
No Spin
-
-
Water
rpm
400
?
on
that function has been
turns on,
[WD-1480(5)F(H)D /
1488FHD]
-
1.
spin
Spin
[WD-1280(5)F(H)D
/1288FHD]
No Spin
-
this
is selected
Wool, Delicate and Hand Wash program.
be chosen.
[WD-1080F(H)D
/1085F(H)D]
No Spin
Spin"
stops
selected.
[WD-1080F(H)D /
1085F(H)D]
By pressing
the washer
remove
rinse when "No
If lamp
?
spin
Spin
Quick 30
400U
(600)U
800U 1000U
(1200)U (1400)U
No
Spin
19
H
ow to use
washer
3.
Display
?
Completion of washing
When
washing cycle is completed,
is displayed on the "Multi
display".
"
"
1.
?
Special function display
When Child lock is selected, the
is displayed.
"
"
?
?
When time
the
delay is selected, it shows
remaining times to finish the selected
4. Time left
program.
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
diagnose display
-
-
?
If the washer has
a
trouble, the trouble
-
type is displayed.
"
"
:
"
"
:
"
"
"
"
"
"
"
"
"
"
"
"
"
"
If this
Sensing
-
water pressure error
Problem of
overfilling
:
Door is not closed
:
Over load in motor
:
Over load in motor
:
Water inlet trouble
:
Drainage
:
Imbalance trouble
:
letters
-
?
Cotton-Eco : around 2 hours and 58 minutes
Cotton : around 2 hours and
Synthetic
43(39)
minutes
around 1 hours and 32 minutes
:
Delicate : around 1 hour and 7 minutes
Wool : around 1 hour and 1 minutes
Hand Wash : around 1 hour
Quick 30
:
around 30 minute
The
washing time may vary by the
laundry, water pressure, water
temperature and other washing conditions.
amount of
trouble
Water temperature trouble
error
-
water
displayed, please refer
to the troubleshooting page26 and follow the
guide.
20
manufacturer.
※( ) : WD-1080(5)F(H)D/1280(5)F(H)D/1288FHD
-
2. Self
by
are
?
If the imbalance is detected
removing
or
if the suds
program works, the wash time
shall be
longer.
(Max. increasing
time is
45minutes.)
aintenance
M
Before
cleaning
the washer interior,
unplug the electrical
power cord to avoid electrical
shock to avoid electrical shock hazards.
n
The water inlet filter
"
-"
-
message will blink
error
detergent
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
n
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain it
using
1.
Open the lower cover
cap( )byusing
2.
left in the
smooth
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever may have
Be careful when
objects
ensure
stopped
draining
it up.
if the water is hot.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Take out any
At
foreign material
( ). After
cleaning, turn the pump filter ( )
from the pump filter
coin. Turn the drain
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
use a
flowing
remove
vessel to
on
prevent
to the floor. If the
( )
open to the left.
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
3
2
2
21
aintenance
M
Dispenser drawer
n
After
a
while
and fabric softeners leave
detergents
deposit
a
?
It should be cleaned from time to time with
a
?
If necessary it
from the machine
can
be removed
completely
water.
by pressing
the catch
downward and
?
by pulling it out.
cleaning, the upper part
jet of running
in the drawer.
To facilitate
of the fabric softener
compartment
can
be removed.
max
max
The drawer
n
Detergent
can
be cleaned
?
also accumulate inside the
occasionally
Once you have finished
rinse
n
?
recess
cycle
The
without
washing
If you live in
and it is not
a
with
the drawer and
run a
laundry.
drum
hard water area, limescale
easily
which should
old toothbrush.
cleaning, replace
continuously
builds up in
places where
clogs appliances,
and if it is not
kept
in check these will
Although the washing drum is made of Stainless steel, specks of rust can
articles (paper clips, safety pins) which have been left in the drum.
?
The
?
If you
washing
be caused
descaling agents, dyes
or
bleaches, make
Descaler could contain
components that
Remove the
a
22
eventually
use
by
small metal
drum should be cleaned from time to time.
sure
they
are
suitable for
washing
use.
Never
seen
replaced.
?
use
it cannot be
removed.
Over time the build up of scale
have to be
an
recess
spots with
steel wool.
stainless steel
can
attack
part of your washing machine.
cleaning agent.
machine
aintenance
M
n
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
Immediately wipe
Try
warm
off any
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
damp
cloth.
sharp objects.
methylated spirit,
use
diluents
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket
always be clean to ensure a water tight seal.
Run washer
through
a
complete cycle using
Repeat
process if necessary.
NOTE
Remove hard water
n
Winterizing
winterizing
1. Turn off water
an area
where
instructions to
should
as
washer safe.
freezing
can occur or
prevent damage
moved in
freezing temperatures,
to the washer:
supply tap.
electrical cord into
Plug
4. Add
areas
hot water.
deposits using only cleaners labeled
2. Disconnect hoses from water
3.
These
glass.
instructions
If the washer is stored in
follow these
and door
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze to
empty wash drum. Close
door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
Replace
dispenser
remove
through
a
expelled.
cord, dry drum interior, and close door.
drawer. Drain any water in
compartments and dry compartments.
drawer.
8. Store washer in
9. To
for 1minute to drain out all water.
an
uprignt position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
roubleshooting guide
T
This
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you call the Service Department.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service.
Thumping
sound
?
Heavy wash loads may produce
thumping sound. This is usually
If sound continues, washer is
probably out of balance. Stop and
normal.
redistribute wash load.
a
Vibrating
noise
?
Have all the transit bolts and
packing
?
Are all the feet
the
If not removed
been removed?
resting firmly
during
installation. See Installation for
on
removing
transit bolts.
Wash load
ground?
in drum.
unevenly distributed
Stop washer and
rearrange wash load.
Water leaks.
?
Fill hose connection is loose at
tap
?
or
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
Oversudsing
detergent?
can cause
Water does not enter
washer
or
?
supply
it not
adequate
in
or
unsuitable
The formation of foam
water leaks.
Check another
tap in the house.
area.
it enters
slowly
Water
detergent
?
Water
?
Water inlet hose
?
The filter of the inlet hose
supply tap
completely open.
is not
are
Fully
kinked.
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
Clean and
straighten
or
clogged.
Clean the drain filter.
the drain hose.
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug
sure
fits
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
by a qualified electrician.
on water supply tap.
Turn
on.
Washer won't
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting guide
T
Possible Cause
Symptom
?
Water
?
Water
?
?
Solution
supply it not adequate in area
supply taps are not completely
open.
Water inlet hose
are
Fully open tap.
Straighten hose.
Check the filter of the inlet hose.
kinked.
The filter of the inlet hose
Check another tap in the house.
clogged.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
appliance
or clogged.
clogged.
has
an
imbalance
detection and correction
system.
individual
are
heavy
articles
If
or
straighten
the drain hose.
2 similar items to
Rearrange
spinning
help
load to allow proper
loaded
bath mat, both robe, etc. this
system
may stop spinning or even interrupt
the spin cycle altogether, if the
imbalance is too
great even after
several
?
spin starts.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and
repeat the spin cycle.
?
Is the door
Close the door.
opened?
If"
"is not released, call for service.
Unplug the
power
plug
service.
?
If the water overfills due to the
water
"
?"
"
display.
"is
sensor
26
faulty
valve, you will get
displayed
if the water level
malfunction.
?
Over load in motor.
?
Over load in motor.
Close the water tap.
Unplug the power
Call for service.
plug.
and call for
T
erms
of
Warranty
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to use the
If the
product
rating plate.
is connected to any
voltage
product.
other than that shown
the
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
or
change
by pests for example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
of
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
by the
owner's manual.
/ substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
?
?
?
?
Replace
fuses in
or
correct house
Correction of unauthorized
Incidental
wiring
or
correct house
repairs.
consequential damage to personal property
possible defects with this appliance.
If this
or
product
plumbing.
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
27
a
P/No.: 3828ER3009Y
Download PDF

advertising