LG | WD-1076FB | LG WD-1076FB Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD-1374(6)F(H)B
WD-1274(6)F(H)B
WD-1174(6)F(H)B
WD-1074(6)F(H)B
WD-8074F(H)B
WD-8078FHB/1078FHB
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
40%
n
Jumbo drum
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
n
More economical
Intelligent
Wash
by Intelligent
System
Wash
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
n
Child-Lock
The Child-Lock
pressing
n
system has been used
any button to
Low noise
speed
change
control
to
prevent children from
the program
during operation.
system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
n
water level and
consumption.
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
Do not install
be
?
?
or
store the washer where it will
?
exposed to the weather.
Do not
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
instructions
or
published user-repair
instructions
?
that you understand and have the skills to carry
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this
is used
by
or near
Do not wash
or
dry
articles that have been
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
in, washed in, soaked in,
or
on,
with,
this or any other
Do not leave the washer door open.
An open door could entice children to
or
appliance
or
?
inside
?
Never reach into washer while it is
?
The
hang
can
try to
To minimize the
this
possibility of electric shock,
appliance from the power supply
or
disconnect the washer at the household
on
?
moving.
completely stopped.
laundry process
retardant of fabrics.
or
distribution
crawl inside the washer.
until the drum has
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
unplug
play
appliance.
the door
?
children.
Do not allow children to
?
using
instructions.
out.
?
to persons when
combustible
recommended in the user-maintenance
?
injury
cleaned
Do not
or
or
washer, follow basic precautions, including the following:
Wait
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
pecification
S
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
or its service agents
similarly qualified person in
Drawer
or a
(For detergent and
fabric softener)
order to avoid
Control
a
hazard.
panel
Drain hose
Door
Lower
cover
Drum
Adjustable
Drain pump filter
Lower
Drain
Name
n
Power
n
n
n
supply
Front
:
220-240V~,50Hz
Size
:
:
n
Water
n
Permissible water pressure
consumption
The appearance and
loading washing
cap
machine
600mm(W) 600mm(D) 850mm(H)
63kg / 2100W
: 7.0kg
: No Spin/400/600/800[WD-8074F(H)B/WD-8078FHB]
No Spin/400/600/800/1000[WD-1074(6)F(H)B/WD-1078FHB]
No Spin/400/600/800/1100[WD-1174(6)F(H)B]
No Spin/400/600/800/1000/1200[WD-1274(6)F(H)B]
No Spin/400/600/800/1100/1300[WD-1374(6)F(H)B]
:75
(10.7 /kg)
: 0.3-10kgf/
(30-1000kPa)
specifications
may be varied without notice to raise the units
Accessories
Inlet
4
:
Weight / Max.Watt
Wash capacity
Spin speed
n
cover
plug
n
n
feet
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
quality.
nstallation
I
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Install
Transit bolts
n
The
appliance
is fitted with transit bolts to
Removing
n
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
?
?
If
they
are
not
removed, it may
use.
bungs.
cause
heavy
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
vibration, noise and malfunction.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
n
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
under entire washer is 1˚
slope
Power outlet
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with
than
Laundry
one
Additional Clearance :
For wall, door and floor modeling is
Tub
approx.
2cm
more
appliance.
(10cm
: rear
Do not
place
/2cm:right
or
store
& left
required.
side)
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
n
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
Green and Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
identifying
letter E
or
by
the earth
symbol (
)
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
n
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
2. If the
3.
4. Connect the machine to
5. The
n
appliance
Washing
must be
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Machine is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
n
Connecting
water
hose
supply
Water
supply pressure must be between
(0.3~10kgf/cm2)
30kPa and 1000kPa
Don't
strip or crossthread when connecting
Inlet hose to the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the
completely
?
tap
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Hot water
?
Hot(option)
on
the
When your washer has two valves,
tap
Cold
Cold
Make sure that there is no kink
hose and that it is not crushed.
water
tap
?
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Tap without
Normal
n
1. Unscrew the fixing
attach the tap.
screw
thread &
2.
to
screw
type inlet hose
Push the connector up till the
rubber
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
Tap without
Normal
n
1. Untighten the upper
thread &
connector
2.
touch
one
packing
contact with the
Upper
Rubber
Connector
Fixing
tighten
packing
screw
type inlet hose
Push the upper connector up till
the rubber
screw.
Middle
the 4
Rubber
connector
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
tap is
Connector
Water
hose
Middle
guide plate.
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
tap. Then pull the
down, pushing the
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
I
n
nstallation
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
ca.
105
When
installing the drain hose sink,
it tightly with a string.
secure
cm
?
Proper securing
protect
water
of the drain hose will
the floor from
damage
due to
leakage.
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
max.
ca.
?
100
Proper securing
cm
min.60cm max.10cm
cm
The drain hose should not be
higher than
?
105
?
100cm
min. 60cm
strap
min. 60cm
placed
above the floor.
of the drain hose will
protect the floor from damage due
water
100cm
max.
to
leakage.
When the drain hose is too
long,
do not
force back into the washer. This will
cause
abnormal noise.
9
I
n
nstallation
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
floor
the
appliance
on a
solid and level
surface, preferably in
of
a corner
room.
2. If the floor is uneven, adjust the
adjustable feet as required. (do not
insert
pieces
Make
sure
of wood etc. under the
that all four feet
are
feet)
stable
and
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
that the
Adjustable
Higher
Adjustable
feet
a
Lower
feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
move
the
up and down at
(Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
all.
10
C
n
before
are
Caring
before
washing
washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always
transfer
sort dark colors from
soiled items with
Soil
3.
Caring
n
before
colors and whites. Wash
separately as dye and lint
possible, do not wash heavily
one.
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
pale
discoloration of white etc. If
causing
lightly soiled
can occur
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets to
make
sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
dding detergent
A
n
Adding detergent
1. The
Dispenser
and fabric softener
3. Detergent dosage
Drawer
?
The
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
used more than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
(Causing
a
detergent only for the front
washer.
Detergent
for water
?PreWash+MainWashU
motor.
usage may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
the last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the clothes
directly
12
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
at
unction
F
n
Recommended
courses
Fabric
according
to the
Maximum
Proper
Program
Temp.
First check if
Whites
95˚C
Eco
(60˚C, 50˚C,
Rinse+
40˚C)
Bio
(white cotton, linen
towel and
sheets...)
Liter
kWh
Minutes
Rating
85
2.74
158
Rating
75
0.72
115
Synthetic Polyamide, Acryic,
Polyester
Less than
58
0.6
88
Delicate
Delicate laundry
easily damaged
(silk, curtains...)
58
0.41
58
Wool
40˚C
(50˚C, 60˚C,
Cold, 30˚C)
Hand
"Hand Wash"
Wash
marked delicate and
wool
Pre Wash
:
(40˚C, Cold)
53
0.28
58
51
0.03
57
laundry
Bio
Rapid
Pre Wash
Eco
Rinse+
(40˚C, Cold)
Cold(30˚C,
40˚C)
is
4.0
kg
Bio
Less than
Rinse+
30˚C
laundry
If the
Rinse+
30˚C
Machine washable
woolens with pure
new wool only
Eco
40˚C
pajamas...)and
(50˚C, 60˚C,
lightly soiled white Cold, 30˚C)
cotton(underwear...)
3.0
kg
Less than
Rinse+
Rinse+
heavily soiled,
2.0
kg
Less than
2.0
"Pre Wash"
available in Coloureds, Whites and
kg
course
is recommended. Pre Wash is
Synthetic Program.
By selecting Eco function, the water temperature is reduced and washing time
lengthened. So you can economize in your consumption of heating energy.
Rinse+
:
in
Load
Pre Wash
(shirts, night dresses,
Bio
in
Rapid
Coloureds Color fast gaments
:
Energy
in
Pre Wash
laundry is machine
washable.
:
If you wish to rinse more, the Rinse+ function will
If you want to elimenate protein stains
by pressing the option button.
NB. You
can
only
Time
Water
Option
Type
Eco
laundry type
remove
any trace of
is
detergents.
(milk, blood, chocolate...), you may select Bio function
select Bio function and Eco function when
temperature is higher than 60˚C in
Whites, Coloureds and Synthetic.
13
H
ow to use
1. Coloureds
washer
automatically
selected upon power
2. Manual
?
Press the Power button to start.
?
?
Press the Start/Pause button.
?
?
Initial condition
-
Wash
:
Main wash
-
Rinse
:
3 times
Water temperature
:
40˚C
Program : Coloureds
14
Select the conditions which you want to
use, by pressing each button.
conditions, please
refer to the page15~page20
?
-
Press the Power button to start.
For selecting the each
-Spin:800rpm
-
Selecting
on.
Press the Start/Pause button.
H
ow to use
(1)
(1)
(2)
(3)
Button
:
Button
:
Button
:
washer
(2)
(3)
(4)
(5)
(7)
By pressing
button, only
the
Option
one Option
?
Button
Dial
:
:
Start/Pause
Program
Button
:
Power
By selecting Eco function, the water
temperature is reduced and washing time is
-
Bio
lengthened. So you can economize
consumption of heating energy.
-
Rinse+
NB. You
-
Eco
-
Pre Wash
function may be selected.
can
in your
select Eco function when
temperature is higher than 60 C in
Whites, Coloureds and Synthetic.
4. Pre Wash
1. Bio
protein stains
(milk, blood, chocolate...), you may select
function by pressing the option button.
?
If you want to eliminate
NB. You
(7)
(8)
(9)
(9)
3. Eco
Option
?
(8)
(4) Child Lock
(5) Button : Time Delay
(6) Button : Rapid
Option
Spin
Temp.
?
(6)
can
select Bio function when
temperature is higher than
Coloureds and
60 C in
If the
laundry
course
Bio
?
is
Pre Wash is available in
Coloureds and
Whites,
Synthetic.
heavily soiled,
"Pre Wash"
is effective.
Whites,
Synthetic.
The required lamp
identification.
will
light up for
2. Rinse+
?
Used to additional
removing
?
traces of
rinse, which may assist in
detergent
By selecting Rinse+ function,
Time and the Rinse water
are
residue.
the Rinse
increased.
15
ow to use
H
washer
Spin
?
WD-1074(6)F(H)B/WD-1078FHB
Whites / Coloureds/Synthetic
-
800U 1000U Rinse HoldU No
SpinU
-
400U 600
Delicate
400U 600U 800U Rinse HoldU No
-
Spin
Wool / Hand Wash
400U 600U 800U 1000U Rinse HoldU No
[WD-8074F(H)B
WD-8078FHB]
Spin
[WD-1174(6)F(H)B]
[WD-1074(6)F(H)B
WD-1078FHB]
?
WD-1174(6)F(H)B
-
Whites /
Coloureds/Synthetic
800U 1100U Rinse HoldU No
SpinU
-
400U 600
Delicate
400U 600U 800U Rinse HoldU No
-
Spin
Wool / Hand Wash
400U 600U 800U 1100U Rinse HoldU No
Spin
?
[WD-1274(6)F(H)B]
?
By pressing
can
[WD-1374(6)F(H)B]
the
Spin button,
WD-1274(6)F(H)B
-
the
be chosen.
-
1.
Whites / Coloureds
800U 1000U 1200U Rinse HoldU
spin speed
No SpinU 400U
Synthetic
600
800U 1000U Rinse HoldU No
Spin selection
SpinU
400U 600
?
Spin speed
program
?
as
is available
according
to the
-
follows.
WD-8074F(H)B/WD-8078FHB
-
Whites / Coloureds /
-
-
600
Delicate / Wool / Hand Wash
400U 600U 800U Rinse HoldU No
Spin
16
Spin
Wool / Hand Wash
400U 600U 800U 1000U Rinse HoldU No
Synthetic
SpinU 400U
800U Rinse HoldU No
Delicate
400U 600U 800U Rinse HoldU No
Spin
ow to use
H
washer
Water
?
Temp.
WD-1374(6)F(H)B
-
No
SpinU 400U
Synthetic
600
SpinU
Cold
-30˚C/40˚C/50˚C/60˚C/
95˚C
400U 600
Delicate
400U 600U 800U Rinse HoldU No
-
Temp.
selected.
-
800U 1100U Rinse HoldU No
-
the
button, the water
temperature can be
800U 1100U 1300U Rinse HoldU
-
By pressing
?
Whites / Coloureds
Spin
Wool / Hand Wash
400U 600U 800U 1100U Rinse HoldU No
Spin
1. Water
?
2. No
spin
below
-
?
If
spin is selected,
draining water.
no
The
required lamp
identification.
will
the washer
stops after
-
light up for
Is selected
-
-
by pressing
the
Spin
button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
?
To
proceed through
to a drain or
temperature
according
Whites
95˚C U 40˚C
Coloureds &
40˚CU
3. Rinse Hold
?
Water
spin,
completed using to
to the required program.
once
Temperature
U
can
be selected
as
to the program.
50˚C
U
60˚C
Synthetic
50˚CU
60˚CU
ColdU
30˚C
Delicate & Wool
30˚C U 40˚C U Cold
Hand Wash
Cold
U
30˚C
U
40˚C
The
required temperature lamp
identification.
For the
more
detailed
will light up for
information, please refer
to the page13.
the rinse hold function is
program dial scroll
(Spin
or
Pump)
The required lamp
identification.
will light up for
17
H
ow to use
washer
Child Lock
Time
Delay
Time Left
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
1. Child Lock
?
Child Lock
can
Time Left
1. Time
Delay
Preparing washing before starting
be set
by pressing and holding
Delay button
the
-
button and Time
Temp.
simultaneously.
"Time
Delay"
-
-
Turn
on
the water
tap.
Load
laundry and close the door.
Place the detergent and fabric softener
in
the drawer.
Time Left
?
How to set "Time
-
-
?
?
When child lock is set, all buttons
To deactivate Child Lock
the
Temp.
again.
and Time
are
inoperable.
system, press and hold
-
Delay button simultaneously
Delay"
Press Power button.
Turn the
Program
dial to select
the program you require.
Press Time Delay button and set the
desired time.
-
Press the Start/Pause button.
(":" blinks.)
Time Left
?
?
To
change to the
desired program, whilst in child
19:00 hours and the minimum time is 3:00
hours.
lock mode.
1. Press and hold both
Temp. and Time Delay
?
together once again.
3. Select the desired program and press the
Start/Pause button again.
?
?
program
18
Time
or
?
be set at any time and it is
automatically canceled when operational errors
occur. Also Child Lock works when power is off.
To cancel the time
delay,
advances
on
press the Power
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
present
the desired
can
pressing of the button
delay by one hour.
button.
Change
The child lock
Each
time
2. Press the Start/Pause button.
?
If Time Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
is
to the
selected
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time
may vary.
ow to use
H
washer
Start/Pause
Rapid
?
By pressing
the
Rapid
button, Rapid function is
selected.
1.
1. Start
Rapid
?
?
?
The
function reduces the entire
program time by approximately half an hour.
Program time will be extended if the washer
encounters an abnormality during the cycle
Rapid
program.
Rapid is available in Whites, Coloureds
program.
The
required lamp
identification.
2. Pause
?
If
temporary stop of wash cycle is needed,
press the Start/Pause button.
?
will light up for
When in
Pause, the power is turned off
automatically
?
Program
?
This Start/Pause button is used to start
wash cycle or pause the wash cycle.
after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
at the end of the wash
9 programs
are
cycle.
Power
available
according to
the laundry
type.
?
Lamp will light
up to indicate
selected
1. Power
(Program)
program.
1.
?
Program
When Start/Pause button is
Coloureds program is
-
the
pressed,
automatically selected.
Program dial,
Delicate
U
Wool
U
Hand WashU
Rinse+Spin
U
Spin
U
PumpU
U
Press the Power button to turn power
and off
?
To cancel the Time Delay function, the
Power button should be pressed.
the
the program is
selected in order of "Coloureds U Synthetic
By turning
?
2. Initial
?
?
Whites
-
-
Coloureds
-
-
Synthetic
-
Delicate
Wool
Hand Wash
-
-
-
Rinse+Spin
Spin
Pump
When the Power button is
pressed,
washer is
ready
the
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
2. Course
-
Program
for Coloureds program.
And the other initial conditions as follows.
Whites".
Regarding to the laundry type for each program
Please refer to the page13.
on
Initial program
-
Coloureds Program / Main wash /
Normal Rinse/800 rpm / 40˚C
19
H
washer
ow to use
3.
Display
?
Completion of washing
When
washing cycle is completed,
is displayed on the "Multi
display".
"
"
1.
?
Special function display
When child lock is selected, the
is displayed.
"
"
?
4. Time left
?
When time
the
delay is selected, it shows
remaining times to finish the selected
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
program.
-
2. Self
-
diagnose display
-
?
If the washer encounters
operation,
displayed.
"
"
:
"
"
:
"
"
:
a
fault
during
-
the associated fault will be
-
-
Water pressure
Problem of
sensing
overfilling
error
-
water
-
Door is not closed
-
"
"
"
"
"
"
"
"
"
"
"
"
:
Over load in moter.
:
Over load in moter.
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
Water temperature trouble
20
?
Whites
:
Coloureds
around 2 hours and 38 minutes
:
around 1 hour and 55 minutes
around 1 hour and 28 minutes
Synthetic
:
Delicate
:
around 58 minutes
Wool
:
around 58 minutes
Hand Wash : around 57 minutes
Rinse+
Spin
:
Pump
Spin
:
around 19 minutes
around 11 minutes
:
around 1 minute
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
amount of
trouble
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
by
manufacturer.
conditions.
?
If
an
unbalanced load is detected
the suds
or
if
removing program operates,
the wash time may be extended.
(Max. increasing time is 45minutes.)
aintenance
M
Before
cleaning
the washer interior,
unplug the electrical
power cord to avoid electrical
shock to avoid electrical shock hazards.
n
The water inlet filter
"
-"
-
message will blink
error
detergent
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
n
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain
using
1.
Open the lower cover
cap( )byusinga
2.
left in the
smooth
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever any threads
Be careful when
objects
ensure
objects.
or
draining
if the water is hot.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Remove any
At
foreign
from the pump filter
coin. Turn the drain
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
use a
flowing
remove
vessel to
on
prevent
to the floor. When
( )
open to the left.
cleaning,
material
( ).
After
turn the pump filter
(
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
3
2
2
21
)
aintenance
M
n
Dispenser drawer
After
a
while
detergents
and fabric softeners leave
deposit
It should be cleaned from time to time with
a
?
If necessary it can be removed
downward and by pulling it out.
from the machine
?
To facilitate
cleaning,
completely
the upper
jet
of
a
?
running
in the drawer.
water.
by pressing
part of the fabric softener compartment
the catch
can
be removed.
max
max
n
The drawer
Detergent
can
be cleaned
?
with
occasionally
The
washing
If you live in
seen
a
replace
and thus not
which should
the drawer and
run a
drum
hard water area, limescale may
easily
continuously
build up in
clogs appliances,
and if it is not
it cannot be
kept
in check these may have to
replaced.
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
?
The
drum should be cleaned from time to time.
?
If you
?
places where
removed.
Over time the build up of scale
be
recess
old toothbrush.
an
Once you have finished cleaning,
rinse cycle without laundry.
n
?
recess
also accumulate inside the
Although
the
washing
use
descaling agents, dyes
or
bleaches, make
sure
they
of rust
can
be caused
are
suitable for
washing
use.
Descaler may contain chemicals that may
Remove any
Never
22
use
spots with
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
by
small
the drum.
washing
machine.
machine
aintenance
M
n
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
damp
cloth.
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
opening, flexible gasket and
Run washer through a complete cycle using hot water.
Repeat process if necessary.
Dry
around the washer door
NOTE
n
Remove hard water
glass.
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
temperatures,
an area
4. Add
freezing
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
Plug
where
follow these instructions to
1. Turn off water
3.
door
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
9. To
remove
through
a
an
expelled.
cord, dry the drum interior, and close the door.
dispenser drawer,
8. Store washer in
for 1minute to drain out all water.
drain and
dry excessive
water from the
compartments.
upright position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
roubleshooting guide
T
This
washing machine is equipped with automatic safety functions which detect and diagnose faults
early stage and react appropriately.
When the machine does not function properly or does not function at all, check the following points
before you contact your service provider.
at
an
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service centre.
Thumping
Vibrating
sound
noise
?
?
a
Heavy wash loads may produce
thumping sound. This is usually
probably
normal.
redistribute wash load.
Have all the transit bolts and
packing
?
the
If not removed
been removed?
Are all the feet
If sound continues, washer is
out of balance. Stop and
during
installation, refer
resting firmly
on
for
removing
to Installation
Wash load may be
distributed
ground?
in drum.
guide
transit bolts.
unevenly
Stop washer
and
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
supply tap
completely open.
is not
?
Water inlet
?
The filter of the inlet
hose(s)
are
Fully
kinked.
hose(s)
are
open tap.
Straighten hose(s).
Check the filter of the inlet
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter.
hose(s).
the drain hose.
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug
sure
fits
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
by a qualified electrician.
on water supply tap.
Turn
on.
Washer won't
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting guide
T
Possible Cause
Symptom
?
Water
?
Water
?
?
Solution
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s)
are
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet
hose(s).
clogged.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
has
an
unbalance
detection and correction
system. If
individual
are
heavy
articles
or
straighten
the drain hose.
2 similar items to
Rearrange
spinning
load to allow proper
loaded
bath mat, both robe,
?
Is the door
Close the door.
opened?
If"
"is not released, call for service.
Unplug the
power
plug
service.
?
Water overfills due to the
faulty water
valve.
26
help
etc.), this
system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
(ex.
?
appliance
or clogged.
clogged.
Close the water tap.
Unplug the power
Call for service.
?
Water level
?
Over load in motor.
?
Over load in motor.
sensor
has malfunctioned.
plug.
and call for
T
of
erms
Warranty
What Is Not Covered:
?
?
?
?
Service
to your home to teach you how to use the
trips
If the
product
rating plate.
is connected to any
voltage
product.
other than that shown
the
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
or
change
by pests for example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
of
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
by the
owner's manual.
/ substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
?
?
?
Replace
Incidental
possible
?
fuses in
or
correct house
Correction of unauthorized
If this
or
wiring
or
correct house
plumbing.
repairs.
consequential damage to personal property
appliance.
caused
by
defects with this
product
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
P/No.: 3828ER3007X
Download PDF

advertising