LG | WD-14311RD | LG WD-14311RD Owner’s Manual

P/No.: 3828ER3047X
P
roduct Feature
Direct Drive
System
The advanced Brushless DC motor
belt and
directly
drives the drum without
pulley.
Water Circulation
Spray detergent
Clothes
solution and water onto the load
soaked
are
more
quickly
and
The
detergent suds can be removed
shower during rinse cycle. The water
water and detergent more efficiently.
over
and
over.
thoroughly during
more easily by the
wash
circulation system
uses
cycle.
water
both
Built-in Heater
Internal heater
on
automatically
cycles.
selected
heats the water to the best temperature
Child Lock
The Child lock prevents children from
the settings during operation.
any button to
pressing
change
Jumbo drum
40%
LG's
jumbo drum can wash about 40% more load than conventional
washing machines. A bigger drum improves the wash performance.
More economical
Intelligent
Wash
by Intelligent
System
Wash
System
detects the amount of load and water
temperature, and then determines the optimum
washing
time to minimize energy and water
Low noise
By sensing
water level and
consumption.
control system
the amount of load and balance, it
speed
to minimize the
spinning
evenly
distributes load
noise level.
Auto Restart
If the
washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings ............................................................................................................3
Specification ........................................................................................................5
Installation ...........................................................................................................6
Care before washing .........................................................................................12
Adding detergent...............................................................................................13
Function
How to
..........................................................................................................14
use
washer............................................................................................15
Maintenance......................................................................................................23
Troubleshooting guide.......................................................................................26
Terms of Warranty ............................................................................................29
2
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
store the washer where it will
?
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance
?
or
published user-repair
out.
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
?
?
etc.
any other appliance.
Do not leave the washer door open.
An open door could entice children to
?
or
Do not slam the washer door closed
on
?
Never reach into washer while it is
moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame
retardant of fabrics.
try
to
To minimize the
possibility of electric shock,
unplug this appliance from the power supply or
distribution
crawl inside the washer.
or
disconnect the washer at the household
or
hang
care
force the door open when locked. This could
result in damage to the washer.
as
Close supervision is necessary if this appliance
is used by disable or young children.
Do not allow children to play on, with, or inside
the door
?
?
dry articles that have been
cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
garment manufacturer's wash and
this
?
instructions
Do not wash
that you understand and have the skills to carry
lint, paper, rags, chemicals,
?
injury to persons when using
precautions, including the following:
exposed to the weather.
instructions
or
?
panel by removing the fuse
or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
dryer is intend only for drying textile material in
water.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
?
?
If you don't have the proper
outlet, consult
an
electrician.
WARNING : Improper connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded.
Do not
proper outlet installed
by a
the
modify
plug provided
qualified electrician.
with the
appliance
-
if it does not fit the
outlet, have
3
a
W
arnings
To minimize the risk of fire in
?
a
tumble
dryer,
the
following
spotted or soaked with vegetable
not be placed in a tumble dryer.
Items that have been
hazard and should
Oil-affected items
sources
Such
as
or
should be observed:
cooking
oil constitute
ignite spontaneously, especially when exposed
tumble dryer. The items become warm, causing
can
in
a
a
fire
to heat
an
oxidation
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can
become hot enought to catch fire. Piling, stacking or storing oil-affected items can
prevent heat from escaping and
so
create a fire hazard.
If it is unavoidable that fabrics that contain
vegetable or cooking oil or have been
contaminated by hair care products be placed in a tumble dryer they should first be
washed in hot water with extra detergent-this will reduce, but not eliminate, the
hazard. Washed in hot water with extra detergent-this will reduce, but not
eliminate, the hazard. The 'cool down' cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be removed from the tumble
dryer or piled or stacked while hot.
?
?
?
?
previously cleaned in, washed in, soaked in or spotted with
petro/gasoline, dry-cleaning solvents or other flammable or explosive substances
should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments include
acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and was removers.
Items that have been
Items
foam) or similarly testured
rubber. like materials should not be dried in a tumble dryer on a heat setting.
Foam rubber materials can, when heated, produce fire by spontaneous combustion.
containing
foam rubber
(also
known
as
latex
products should not be used in a tumble dryer to eliminate
the effects of static electricity unless this practice is specifically recommended by the
manufacturer of the fabric softener or product.
Fabric softeners
Undergarments
dryer.
or
similar
that contain metal reinforcements should not be
placed
Damage to the tumble dryer can result if metal reinforcements come
drying. When available a drying rack could be used for such items.
?
Plastic articles such
be
?
placed
in
a
as
tumble
shower caps
or
babies
waterproof napkin
loose
covers
a
tumble
during
should not
dryer.
Rubber-backed articles, clothes fitted with foam rubber pads,
rubber-coated tennis shoes should not be placed in a tumble
4
in
pillows, galoshes
dryer.
and
S
pecification
Name
:
Front
:
220-240V~,50Hz
Size
:
600mm(W)×645mm(D)×850mm(H)
Weight
:
66kg
:
10.2kg (2100W)
:
6kg (1900W)
Power
Wash
supply
capacity/Max.
Dry capacity/Max.
Watt
Watt
loading washing
machine
Spin speed
:NoSpin/400/800/1000/1400
Water
:
consumption
The appearance and
144ℓ(14.1ℓ/ kg )
specifications may
be varied without notice to raise the units
quality.
Accessories
Inlet
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
5
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin, pay particular
is installed
on a
which may be subject to infestation by cockroaches or other
attention to keeping the appliance and its surroundings in clean condition at
are areas
all times.
Any damage which may
appliance guarantee.
be
cause
by cockroaches
or
other vermin will not be covered
by
the
Transit bolts
appliance is fitted
The
?
Packing
to
prevent internal damage during transport.
and all transit bolts must be
removed before
When
with transit bolts to
using
the washer.
the base, be sure
the additional packing
unpacking
remove
support in
packing.
the middle of the base
(Packing support may not
be used depending on
models.)
Removing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
are
along
not
with the rubber
removed,
it may
the spanner
6
supplied.
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
cause
vibration, noise and malfunction.
2. Unscrew the 4 bolts with
3. Take out the 4 bolts
heavy
?
Whenever the
appliance is transported, the
transit bolts must be refitted.
4. Close the holes with the caps
supplied.
I
nstallation
Installation place requirement
Level floor
:
Allowable slope under entire washer is 1˚
Power outlet :
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with more than one
appliance.
Additional Clearance
:
For wall, door and floor
modeling is required.
(10cm : rear /2cm:right & left side)
Do not place or store laundry products on top
of washer at
any times.
They
can
the finish
damage
or
controls.
Positioning
flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
Before placing the washer on tiles, apply a rubber mat under the feet.
Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the
washer.
If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.
With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
Install the washer
on a
?
?
?
?
?
?
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
must be earthed
Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If
a
13 amp
(BS 1363) plug
is used, fit
a
13 amp BS 1362 fuse.
7
nstallation
I
n
Electrical connection
1. Do not
use an
extension cord
or
double
adapter.
be replaced by the
2. If the
3.
supply cord is damaged, it must
similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
4. Connect the machine to
5. The
appliance
must be
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
or
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
?
?
?
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
n
Washing
Machine is to be connected to the water mains
using
hose-sets and that old
new
hose-sets should not be used.
n
Connecting
water
supply
hose
supply pressure must be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
Don't strip or crossthread when connecting Inlet hose to the valve.
If the water supply pressure is more than 1000kPa, a decompression
Water
device should be installed.
?
Two rubber seals
are
?
?
?
in order to
are
supplied
prevent
with the water inlet hoses these
water leaks.
Check water
tightness of washing machine connections by
turning the tap completely on.
Periodically check the condition of the hose and replace the
hose if necessary.
Make sure that there is
no
kink
on
the hose and that it is not
crushed.
When your washer has two valves,
?
The Inlet hose which has red connector is for the hot water
?
If the washer has two
valve.
8
tap.
valves, the energy is saved by using hot
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
3. Push the
connector up till the
packing is
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
?
In
one
water
touch type inlet hose
2. Push the upper connector up
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
till
3. Connect the
water
supply hose
to the middle connector,
pushing the plate down.
the diameter of the tap is
remove the guide plate.
case
large
?
Turn the middle connector not
to have water leaked.
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
?
Your machine
comes
with
only
cold water connection.
?
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
9
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
mobile installations such
use
as
caravans, aircraft etc.
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
Turn off the
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
of suffocation !
Keep
all
packaging
a
risk
well away from children
Installation of drain hose
?
?
?
The drain hose should not be
than 100
?
?
cm
above the floor.
Proper securing of the
the floor from damage
drain hose will protect
due to water leakage.
When the drain hose is too
long,
back into the washer. This will
noise.
10
placed higher
do not force
cause
abnormal
When
installing the drain hose sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
I
nstallation
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
NOTE
appliance
of the
on a
solid and level floor surface,
preferably
in
a
room.
Timber
or
suspended type flooring
excessive vibration and unblance
errors.
2. If the floor is uneven,
insert
adjust the adjustable
pieces of wood etc. under the feet)
Make
sure
feet
as
required. (do
not
resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
NOTE
that all four feet
may contribute to
In the
are
stable and
washing machine is installed
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
case
that the
on a
raised
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete
floors(tile...)
?
The installation surface
?
Install washer
?
Before
on a
placing
must
be
clean, dry and level.
flat hard floor.
the washer
on
tiles, apply a rubber
mat
under the feet.
Do not let the feet of the washer get wet. If feet of the washer get wet,
slipping
may
Wooden floors
?
?
?
occur.
Rubber
Cup
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
at least 15mm thick under the washer, secured to at least 2 floor beams with screws.
If possible install the washer in one of the corners of the room, where the floor is more stable.
Insert the rubber cups to reduce vibration.
You can obtain the rubber cups (p/no.4620ER3001B)
from
the LG spares
dept.
Important!
Proper placement and levelling of the washer ensure long,regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
?
?
?
It must not "Seesaw"
?
The installation surface
across corners
must
under load.
be clean, free from floor wax and other lubricant coatings.
11
C
are
before
washing
Caring before washing
1. Care Labels
Look for
garment
2.
your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
label
on
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
To
soiled items with
lightly
soiled
Soil
one.
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
before
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers, hooks and strings
make
sure
snag
?
on
that these items don't
other clothes.
Pre treat dirt and stains
a
little
to
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
12
dding
detergent
A
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
?
If too
dosage
detergent should be used according to
instruction of the detergent manufacture.
much
detergent
is used
more
the
than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
Adding
(Causing
a
detergent only for the front
washer.
Detergent usage
may need to be
adjusted
for water temperature, water hardness,
size and soil level of the load. For best
?PreWash+MainWashU
2.
load to the motor.
results, avoid oversudsing.
Fabric Softener
Tips
Full load
according
:
to
manufacturer's recommendation.
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
?
Minimum load
:
1/2 of full load.
?
Detergent is flushed from the dispenser at
the beginning of the cycle.
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
3/4 of the normal amount.
early dispensing
of the fabric softener which could stain
?
:
2
days.
Softener will
automatically be added
during the last rinse cycle.
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
directly
on
the cloths
13
F
unction
Recommended
Fabric
Program
according
courses
to the
Proper
Temp.
(Option)
Type
Color fast garments
Cotton
laundry type
Option
Maximum
Load
Time
in
Minutes
60˚C
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton (underwear...)
(Cold,
30˚C, 40˚C,
95˚C)
Laundry type is the
Cotton-Eco same in Cotton.
Rating
110
Rating
120
4.0kg
75
3.0kg
65
2.0kg
55
2.0kg
50
5.0kg
30
Soak
Pre Wash
Rinse+Spin
Spin Only
Dry Only
60˚C
(40˚C)
Intensive
40˚C
Polyamide, Acrylic,
Synthetic
Polyester.
Delicate
(Cold,
30˚C,60˚C)
Delicate
laundry easily
damaged.
30˚C
(Cold, 40˚C)
Machine washable woolens
Wool/Silk with
pure new wool only.
Hand
Wash
Quick 30
30˚C
(Cold, 40˚C)
"Hand Wash" marked
delicate and wool laundry.
Colored Landry which
is lightely soiled fast.
Rinse+Spin
Spin Only
Intensive
Cold
(30˚C,40˚C)
30˚C
(Cold, 40˚C)
Rinse+Spin
Spin Only
Dry Only
Intensive
Duvet
Water
Cotton
bedding with filling,
duvet, pillow, blanket, sofa
cover with light filling.
Temperature
:
Cold
(30˚C, 40˚C)
Rinse+Spin
Spin Only
Intensive
1
king size
(9 Tog)
60
Select the water temperature to the wash cycles.
Always follow garment manufacture's care label or instructions when
laundering.
Intensive
If the
:
Program setting
laundry
is
heavily
with "Intensive"
soiled "Intensive"
option
option
is effective.
for test in accordance
or
in
conformity with
EN60456
and IEC 60456.
Pre Wash
14
:
"Pre Wash" Cotton is recommended. Pre Wash is
available in Cotton, Cotton-Eco and Synthetic Program.
If the
laundry
is
heavily soiled,
ow
H
1. Cotton
to
use
washer
automatically
selected upon power
?
?
?
Press the
Power(
Press the
Start/Pause(
)
-
-
-
-
Wash
:
Main wash
Rinse
:
3 times
Spin
1400 rpm
:
Water temperature
on.
button to start.
Initial condition
-
2. Manual
)
button.
?
?
Power(
)
button to start.
Select the conditions which you want to
use, by pressing each button.
selecting the each conditions, please
refer to the page16~page22
For
?
:
Press the
Selecting
Press the Start/Pause button.
60˚C
Program : Cotton
15
ow
H
to
use
(1)
Button
(1)
(2)
(3)
(4)
Dial
:
washer
(2)
Power
:
(5)
(6)
(7)
(8)
Program
Button
:
Start/Pause
Button
:
Option
(3)
(4) (5) (6)
(7)
Child lock
Button
:
Rinse
Button
:
Button
:
Spin
Temperature
(8)
(9) (10)
(11)
(9) Button : Dry
(10) Button : Intensive
(11) Button : Time Delay
Power
Program
1. Power
?
Press the
on
?
Power(
)
(Program)
button to turn power
and off.
?
To cancel the Time
Power(
)
button
Delay function, the
should be pressed.
9 programs
-
Cotton
-
Cotton-Eco
-
-
When the
the
Power(
) button is pressed,
washer is ready for Cotton program.
And the other initial conditions
?
So, if you
as
follows.
available
according
-
?
-
-
Synthetic
Delicate
Hand Wash
Quick 30
-
Duvet
-
Drain
Wool/Silk
Lamp
will
light
up to indicate selected program.
want to advance into the
washing cycle without changing the
program, just press Start/Pause(
)
button and then the washer will proceed.
?
-
When
Start/Pause(
) button is pressed,
Cotton program is automatically selected.
the
Initial program
Program / Main Wash /
Normal Rinse / 1400 rpm / 60˚C
16
the
the program is
selected in order of "Cotton Cotton-Eco
By turning
Program dial,
-
-Cotton
to the
laundry type.
2. Initial Program
?
are
Synthetic
Quick 30
-
-
Delicate
Duvet
-
-
Wool/Silk
-
-
Hand Wash
Drain".
Regarding to the laundry type for each program
Please refer to the page14.
ow
H
to
use
washer
Start/Pause
Option
?
By pressing the option
button, only one option
function be selected.
1. Start
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
cycle.
2. Pause
?
?
?
1. Soak
If temporary stop of wash cycle is needed,
press "Start/Pause" button.
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
at the end of the wash
?
Use this mode to wash normal clothes
and
?
heavy
clothes which
are
or
thick
excessively dirty.
Available in Cotton, Cotton-Eco and
Synthetic.
2. Pre Wash
?
cycle.
Use this
for load that need
option
pretreatment. Add 16 minutes pre wash and
drain.
-
When
using Pre Wash option, do not use
liquid detergent in the main wash
comportment. Use powder for the main
wash.
?
Available in Cotton, Cotton-Eco and
Synthetic.
3. Rinse+Spin
?
Use this
option
4. Spin
?
to rinse and then
spin.
Only
When you want
spin only,
select the this
option.
5.
?
Dry Only
When you want
dry only,
select the this
option.
?
Available in Cotton, Cotton-Eco,
and Quick 30.
Synthetic
17
H
ow
to
use
washer
Child lock
Rinse
?
By pressing the Rinse
button, the Rinse type
can
be selected.
If you choose to lock the buttons on the
control assembly to prevent tampering, this
-
Normal
-
Rinse+
-
Rinse++
-
Normal+Hold
-
Rinse++Hold
function may be selected.
1. Child lock
1. Normal
?
Child lock
by pressing and holding the
Option and Rinse button simultaneously.
(About three seconds)
can
be set
?
Cotton / Cotton-Eco /
Synthetic performs 3
Rinses
?
Wool/Silk / Hand Wash
/Quick 30 / Delicate /
Duvet / performs 2 Rinses
?
When child lock is set, all buttons
are
inoperable.
2. Rinse+ & Rinse++
?
?
To deactivate Child lock system, press and hold the
Option and Rinse button simultaneously again.
(About three seconds)
?
Used to additional rinse, which may assist
in removing traces of detergent residue.
By selecting Rinse+
or
Rinse++ function,
the Rinse Time and the Rinse water
are
increased.
3. Rinse Hold
?
To
change to the desired program, whilst in
child
?
lock mode.
1. Press and hold both
Option and
by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
Rinse button
together once again.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
Is selected
?
To
to a drain or
spin, once
the rinse hold function is completed using to
program dial scroll to the required program.
The
proceed through
required lamp will light up for
identification.
?
be set at any time and it is
automatically canceled when operational errors
occur. Also Child lock works when power is off.
The child lock
18
can
H
to
ow
use
Time
washer
Spin
Delay
?
By pressing the Spin button,
the spin speed can be
chosen.
1. Time
Delay
Preparing washing before starting "Time Delay"
Turn on the water tap.
Load laundry and close the door.
Spin only
-
1. Press the Power button.
2. Set the desired
-
-
?
Place the
detergent and fabric softener
in
the
spin
spin speed by pressing
button.
the drawer.
3. Press the Start/Pause button.
How to set "Time
1. Spin selection
-
-
-
Delay"
Press Power(
) button.
Turn the Program dial to select
the program you require.
Press Time Delay button and set the
?
program
-
desired time.
-
Press the
("
"
Spin speed
as
is available
according
to the
follows.
Cotton & Cotton-Eco & Quick 30
NoSpin-400-800-1000-1400
Start/Pause(
lamp is on)
) button.
-
Synthetic
& Wool/Silk & Hand Wash &
Duvet
NoSpin-400-800-1000
?
If Time
button is
"3:00" is
Delay
pressed,
displayed. The maximum delayed time is
-
Delicate
NoSpin-400-800
19:00 hours and the minimum time is 3:00
2. No spin
hours.
?
?
pressing of the
delay by one hour.
Each
To cancel the time
Power(
?
?
button advances time
delay, press the
) button.
?
If "No
Spin" is selected,
after draining water.
the washer stops
The
required lamp will light up for
identification.
Delay is 'expected time' from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
Time
According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
19
H
washer
ow to use
Water
?
Temp.
By pressing
Dry
the
Temp.
This
washer-dryer's automatical
process from washing to drying
can be selected easily.
For most even drying make
?
button, the water
temperature can be
selected.
-
?
,
Cold
sure
all articles in the clothes
load
are
-30˚C/40˚C/60˚C/95˚C
similar in material and
thickness.
Do not overload
?
1. Water
?
Water
temperature
according
-
too many articles into drum.
Items must be able to tumble
Temperature
can
freely
be selected
as
?
below
to the program.
Cotton-Eco
40˚C-60˚C
Cotton
Synthetic
Low
Cold-30˚C-40˚C-60˚C
-
By pressing
remove
load before
remember to
cycle,
the DRY button, you
Delicate & Wool/Silk & Quick 30 &
can
select
Time
Very
Cupboard
Cold-30˚C-40˚C-60˚C-95˚C
-
If you open door and
dryer has finished its
press the Start/Pause button.
?
-
dryer by stuffing
Iron
Temp.
"
"
After the end of
dry,
Hand Wash & Duvet
By pressing the
"Start/Pause" button the
Cold-30˚C-40˚C
program can be ended. If you not press the
"Start/Pause" button, the
cycle will end
?
is
"
displayed.
The
required temperature lamp
identification.
For the
more
detailed
will
light
up for
information, please refer to
automatically
1.Drying
"
after 4 hours.
Automatic
guide
the page13.
?
Intensive
Use your Automatic Cycles to dry most loads.
Electronic sensors measures the temperature of
the exhaust to increase
or
decrease
temperatures for faster reaction
temperature control.
?
Recommend Automatic
drying
drying
time and tighter
course as a
kind
of clothes.
?
?
?
If the
laundry is heavily soiled "Intenive"
option is effective.
By selecting the Intensive option, the wash
time may be extended, depending on the
program selected.
To use this option press the Intensive button
once before the wash program is started.
20
a) Synthetic Low Temp.
b) If you want to iron clothes-Iron.
c) Cotton Cupboard.
d) Diaper Very
-
-
-
NOTE: The estimated
from the actual
drying
time varies
drying time with an Automatic.
The type of fabric, size of the load, and the
dryness selected affect drying time.
washer
ow to use
H
2.Drying
time
Fiber
guide
-
?
press the Dry button, the
can be selected.
?
Drying
By
course can
drying
time
last up to 100min.
When
?
selecting drying only, drying course
will start after spining.
These drying times are given as a guide to
help you set your dryer for manual drying.
Drying times can vary greatly depending on
dampness, room temperature and type of
fabric and your own experience will be your
best guide.
?
Woolen Articles
?
Do not tumble
to
dry woolen articles. Pull them
their original shape and dry them flat.
Woven and
-
-
Some
Loopknit
loopknit materials may
shrinks, by varying amounts, depending on
their quality.
woven
Always
drying.
stretch them out
immediately
-
When you are not remove a loaf of clothes
from the dryer as soon as it stops, wrinkles
form.
The Cool Down
operating periodically
tumbles, rearranges and fluffs the load
or
to
avoid wrinkles without heat for up to 4
hours.
?
The
message will continue to
until the clothes are removed or the
display
pressed.
soon
Leather Materials
check the manufacture's instructions.
Baby
Always
drying cycle is completed,
[Cool Down] is displayed on the Multi
display.
The Cool Down is setting automatically
when a drying cycle is complete.
dryer
permanent press articles as
the dryer stops to reduce wrinkles.
Fiber
-
When
"
Synthetics
Take out
Always
?
"
Start/Pause button is
Do not overload your
as
-
after
dry fiberglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time
you use the dryer and irri tate your skin.
can
and
Permanent Press and
-
Materials
Do not
3.Completion of Drying
?
-
glass
clothes and
Night
Gowns
check the manufacture's instructions.
Rubber and Plastics
-
Do not
dry any items mode from or
containing rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
21
H
washer
ow to use
Display
3.
?
Completion of washing
When
"
1.
?
Special function display
When Child lock is
"
"
lamp
?
After the end of
?
When time
the
selected, the
is
dry,
"
is
is
displayed.
During washing cycle,
time is displayed.
?
Recommended program
-
selected
-
program.
-
-
2. Self
diagnose display
-
-
?
If the washer encounters
operation,
displayed.
"
"
"
"
:
Problem of
:
Door is not closed
"
"
"
:
Over load in motor
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
Water
"
"
"
"
"
"
overfilling
Over load in motor
"
"
sensing
:
"
"
:
during
-
-
-
Water pressure
"
fault
the associated fault will be
:
"
"
a
Dry
error
the
?
it shows
delay selected,
remaining times to finish the
"
4. Time left
on.
"
washing cycle is completed,
is displayed on the "Multi display".
Cotton
remaining washing
by
manufacturer.
around 1 hour and 50 minutes
:
Cotton-Eco
around 2 hours
:
around 1 hour and 15 minutes
Synthetic
:
Delicate
around 1 hour 5 minutes
:
Wool/Silk
:
around 55 minutes
Hand Wash
Quick 30
Duvet
:
:
around 50 minutes
:
around 30 minutes
around 1 hour
Drain: around 1 minute
?
The
washing time may vary by the amount
of laundry, water pressure, water
temperature and other washing conditions.
?
If
water
an
suds
unbalanced load is detected
or
if the
program operates, the wash
time may be extended.
(Max. increasing time is 45 minutes.)
removing
trouble
Door Lock
temperature trouble
heater
or
thermostat
trouble.
If these
letters
displayed, please
refer to the troubleshooting page26 and
follow the guide.
error
are
?
Lights
whenever the door of the washer is
locked.
?
The door
can
be unlocked
Start/Pause button to
?
22
The door
can
be
by pressing
the
stop the washer.
opened
after
a
short
delay.
aintenance
M
Before
the washer
cleaning
interior, unplug the electrical power cord
to avoid electrical shock to
avoid electrical shock hazards.
When
disposing of the appliance, cut off the mains cable,
lock to prevent young children being trapped inside.
and
destroy the plug
Disable the door
The water inlet filter
"
-"
message will blink
error
detergent
the control
panel
when water does not enter the
drawer.
If your water is very hard
-
on
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the filter
CAUTION
First drain
is clean to
using
objects
ensure
left in the
smooth
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever any threads
or
remove
objects.
draining if the water is hot.
down before cleaning the drain pump, carrying
Be careful when
Allow the water to cool
emptying
1.
or
opening
Open the lower cover
cap( )byusinga
coin. Drain plug ( )
to pull out the hose.
the door in
2.
an
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
this time
water
use a
flowing
3. Remove out any
At
vessel to prevent
on
to the floor. When
foreign material
from the pump filter ( ). After
cleaning, turn the pump filter ( )
clockwise and insert the drain
plug (
the pump filter
close the lower
( )
open to the left.
)to
the
water does not flow any more, turn
original place.
cover
cap.
2
100
1
out emergency
2
3
3
23
aintenance
M
Dispenser drawer
After
?
?
while
a
detergents
and fabric softeners leave
It should be cleaned from time to time with
If necessary it
can
be removed
a
deposit
jet of running
completely from
by pulling it out.
cleaning, the upper part
a
in the drawer.
water.
the machine
by pressing
the catch
downward and
?
To facilitate
The drawer
Detergent
can
be cleaned
?
cycle
The
?
also accumulate inside the
seen
with
occasionally
without
washing
If you live in
a
can
be removed.
recess
Once you have finished
rinse
of the fabric softener compartment
recess
old toothbrush.
an
cleaning, replace
the drawer and
run a
laundry.
drum
hard water area, limescale may
and thus not
which should
easily
continuously
build up in
places where
it cannot be
removed.
Over time the build up of scale
clogs appliances,
and if it is not
kept
in check these may have to be
replaced.
?
?
?
Although the washing drum is made of Stainless steel, specks of rust can
articles (paper clips, safety pins) which have been left in the drum.
The
washing
If you
use
be caused
descaling agents, dyes
or
bleaches, make
Descaler may contain chemicals that may
Remove any spots with
24
use
small metal
drum should be cleaned from time to time.
sure
they
are
suitable for
washing
use.
Never
by
steel wool.
a
stainless steel
damage part of your washing
cleaning agent.
machine.
machine
aintenance
M
The water circulation nozzle
?
Clean the water circulation nozzle, if
clogged.
Cleaning your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
use
methylated spirits, diluents
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
NOTE
Remove hard water
cleaners labeled
deposits using only
as
safe for
washing
machine.
Winterizing
instructions
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer, drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
upright position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
25
roubleshooting
guide
T
This
washing machine is equipped with automatic safety functions
diagnose faults at an early stage and react appropriately.
When the machine does not function properly or does not function
following points before you contact your service provider.
Rattling
clanking
all, check the
at
Possible Cause
Symptom
and
which detect and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads
a thumping sound.
If sound continues, washer is
probably
out of balance.
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
may produce
This is usually
been removed?
Are all the feet
the
Stop
and
during
installation, refer to Installation guide
resting firmly
on
for
removing
transit bolts.
Wash load may be
distributed
ground?
in drum.
Stop
unevenly
washer and
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent
detergent may
foaming which
or
cause
unsuitable
excessive
may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
are
open tap.
Straighten hose(s).
Check the filter of the inlet
clogged.
Water in the washer
does not drain
?
26
slowly.
or
clogged.
or
?
drains
Drain hose is kinked
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter.
hose(s).
the drain hose.
roubleshooting
guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
be plugged in or connection
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
fuse.
circuit overload, have
a qualified electrician.
a
by
water
replace
capacity.
or
supply tap.
on.
Washer won't
Check that the door is
spin
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Once started, the door can not be
opened for safety reasons.
Door does not open
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
Dry problem
?
Does not
dry
removing
Do not overload.
Check that the washer is
properly to
draining
extract adequate water
from the load.
Clothes load is too small to tumble
property. Add
a
few towels.
27
roubleshooting
guide
T
Possible Cause
Symptom
?
?
?
?
supply is not adequate in area
Water supply taps are not completely
Water
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s)
are
Solution
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose(s).
clogged.
?
?
?
?
?
Drain hose is kinked
The drain filter is
clogged.
clogged.
or
straighten the drain
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
unbalance
an
hose.
Clean the drain filter.
Load is too small.
detection and correction system. If
individual heavy articles are loaded
?
Clean and
or
2 similar items to
help
load to allow proper
(ex.
bath mat, both robe, etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
?
Is the door
or
opend
not completely
Close the door
If
"
completely.
"is not released, call for service.
closed?
Unplug the
?
Water overfills due to the
faulty water
valve.
power
plug
and call for service.
Close the water tap.
Unplug the power plug.
Call for service.
?
?
?
?
28
Water level
sensor
has malfunctioned.
Over load in motor.
Over load in motor.
Check water
supply.
Turn the tap on
If"
is not released,
plug and call service.
"
unplug
power
T
erms
of Warranty
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by factors
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
other than normal domestic
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
of
product
change
or
by pests for example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
on use
example
water drain
warming beeps.
the installation for
example, levelling
the
product, adjustment of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
?
?
?
Replace fuses
Incidental
example, grit, nails,
in or correct house
Correction of unauthorized
wiring
or
product
or
including
the
bra wires, buttons etc.
correct house
plumbing.
repairs.
consequential damage
possible defects with this appliance.
If this
the owner's manual.
/ substances from the machine,
pump and inlet hose filter for
?
by
to
personal property
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
29
a
M
30
emo
Download PDF

advertising