LG | WD-CD1212W | LG WD-CD1212W Owner’s Manual

RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
MFL51768127
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
WORK
SEC.
27
가
BRAND
나
MODEL
다
P/NO.
WD-CD1212W
LG
MFL51768127
PRINTING DEGREE
EXTERIER INTERIER
1
1
LG MODEL 명
MATERIAL AND PRINTING DESCRIPTION
SNOW WHITE 100g OFFSET 인쇄
SUFFIX
F126(0~9)RD
A**REML
LANGUAGE PAGE
REMARK
ENGLISH
ELF-PJT
36
<< 주기 >>
<FRONT>
<BACK>
가
210
나
1. 재질, 인쇄방법, 인쇄도수, 외곽치수등은 작업표에 준한다.
2. 인쇄내용, 문자크기 및 형상, 선의 굵기 등은 설계에서 제시된 FILM에 준함.
3. 외곽치수는 절단후 치수임.
4. 양산전에 설계 한도를 득할 것.
5. 본 부품에 금지물질이 포함되지 않도록 하고, 상세내용은 LG(63)-A-5501-34를 만족할 것
<< NOTES >>
P/NO. 다
150
150
1.
2.
3.
4.
Material, printing and exterier size are refer to work tables.
Printing, text size and line are based on LG design film.
Exterier size on the drawing is cutting line.
Before product controlled by criteria sample.
5. The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE)and details
should comply with LG standard of LG(63)-A-5501-34
PDF
ILLUSTRATOR
TRIG.
UNIT
mm
SCALE
N
S
MODELING DESIGNED REVIEWED CHECKED APPROVED
최경남
09.04.02
1
2
3
LG 전자
4
REV. NO.
REVISION DESCRIPTION
REF. NO.
DATE
기호
변경 사항
시방 번호
년/월/일
PREPARED APPROVED
시방자
승인자
(주)
LG Electronics Inc.
김현석
09.04.02
황성기
09.04.03
RELATED DWG.
T
I
T
L
E
DWG.
No.
DR COMPLETED
도면 DR 완료
완료일 : 09.04.02
MANUAL,OWNER’S
DRUM-EXPORT 1/1
MFL51768127
Washing Machine
OWNER'S MANUAL
WD-CD1212W
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your washing
machine.
P
roduct Feature
추가선택
C
예약
Direct Drive System
The advanced Brushless DC motor directly drives the drum without
belt and pulley.
Water Circulation
Sprays detergent solution and water onto the load over and over.
Clothes are soaked more quickly and thoroughly during wash cycle.
The detergent suds can be removed more easily by the water shower during rinse
cycle. The water circulation system uses both water and detergent more efficiently.
Tilted Drum and Extra Large Door Opening
Tilted drum and extra large opening make it possible to load
and unload clothing more easily.
Embossing drum & waved lifter
Embossing drum enhances the washing performance and reduces clothes
damage.The waved lifter spray and help clothes to enhance washing performance
during the washing cycle.
Automatic Wash Load Detection
Automatically detects the load and optimizes the washing time.
Built-in Heater
Internal heater helps to maintain water temperature at its optimum level for
selected cycles.
Child Lock
The Child lock prevents children from pressing any button to change the settings
during operation.
ontents
Warnings ......................................................................................................................3
Specification...................................................................................................................6
Installation......................................................................................................................7
Care before washing....................................................................................................13
Adding detergent..........................................................................................................14
Function ....................................................................................................................16
How to use washer ......................................................................................................17
Maintenance ................................................................................................................27
Troubleshooting guide .................................................................................................30
Terms of Warranty .......................................................................................................34
2
W arnings
READ ALL INSTRUCTIONS BEFORE USE
!
WARNING!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock, or injury to persons when using
the washer, follow basic precautions, including the following:
• Do not install or store the washer where it will
be exposed to the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance
instructions or published user-repair instructions
that you understand and have the skills to carry
out.
• Keep the area underneath and around your
appliances free of combustible materials such as
lint, paper, rags, chemicals, etc.
• Close supervision is necessary if this appliance is
used by or near children or infirm persons.
Do not allow them to play on, with, or inside this
or any other appliance.
• Keep washer away from fire.
• Do not leave the washer door open.
An open door could entice children to hang on
the door or crawl inside the washer.
• Never reach into washer while it is moving. Wait
until the drum has completely stopped.
• The laundry process can reduce the flame
retardant of fabrics.
• Do not wash or dry articles that have been
cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, dry cleaning
solvents, kerosene, etc.) which may ignite or
explode. Oil may remain in the tub after a whole
cycle resulting in fire during drying. So, do not
load oiled clothes.
• Always follow the fabric care instructions
supplied by the garment manufacturer.
• Do not slam the washer door closed or try to
force the door open when locked. This could
result in damage to the washer.
• To minimize the possibility of electric shock,
unplug this appliance from the power supply or
disconnect the washer at the household
distribution panel by removing the fuse or
switching off the circuit breaker before attempting
any maintenance or cleaning.
• Never attempt to operate this appliance if it is
damaged, malfunctioning, partially disassembled,
or has missing or broken parts, including a
damaged cord or plug.
• Dryer is intended for only drying textile material.
• If the washer has been exposed to water, call an
authorized service provider to avoid any risk of
fire or electric shock.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
• Do not use an adapter or otherwise defeat the grounding plug.
• If you don’t have the proper outlet, consult an electrician.
:
WARNING Improper connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
3
W arnings
To minimize the risk of fire in a tumble dryer, the following should be observed:
• Items that have been spotted or soaked with vegetable or cooking oil constitute a fire
hazard and should not be placed in a tumble dryer.
Oil-affected items can ignite spontaneously, especially when exposed to heat
sources Such as in a tumble dryer. The items become warm, causing an oxidation
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can
become hot enough to catch fire. Piling, stacking or storing oil-affected items can
prevent heat from escaping and so create a fire hazard.
If it is unavoidable that fabrics that contain vegetable or cooking oil or have been
contaminated by hair care products be placed in a tumble dryer they should first be
washed in hot water with extra detergent-this will reduce, but not eliminate, the
hazard. Washed in hot water with extra detergent-this will reduce, but not
eliminate, the hazard. The ‘cool down’ cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be removed from the tumble
dryer or piled or stacked while hot.
• Items that have been previously cleaned in, washed in, soaked in or spotted with
petrol/gasoline, dry-cleaning solvents or other flammable or explosive substances
should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments include
acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and was removers.
• Items containing foam rubber (also known as latex foam) or similarly testured rubber.
like materials should not be dried in a tumble dryer on a heat setting.
Foam rubber materials can, when heated, produce fire by spontaneous combustion.
• Fabric softeners or similar products should not be used in a tumble dryer to eliminate
the effects of static electricity unless this practice is specifically recommended by the
manufacturer of the fabric softener or product.
• Undergarments that contain metal reinforcements should not be placed in a tumble
dryer.
Damage to the tumble dryer can result if metal reinforcements come loose during
drying. When available a drying rack could be used for such items.
• Plastic articles such as shower caps or babies waterproof napkin covers should not
be placed in a tumble dryer.
• Rubber-backed articles, clothes fitted with foam rubber pads, pillows, galoshes and
rubber-coated tennis shoes should not be placed in a tumble dryer.
4
W arnings
• Do not dry unwashed items in the tumble dryer.
• Items that have been soiled with substances such as cooking oil,acetone,
alcohol,petrol,kerosene,spot removers, turpentine, waxes and wax removers should
be washed in hot water with an extra amount of detergent before being dried in the
tumble dryer.
• Items such as foam rubber(latex foam), shower caps, waterproof textiles, rubber
backed articles and clothes or pillows fitted with foam rubber pads should not be
dried in the tumble dryer.
• Fabric softeners, or similar products, should be used as specified by the fabric
softener instructions.
• The final part of a tumble dryer cycle occurs without heat(cool down cycle) to ensure
that the items are left at a temperature that ensures that the items will not be
damaged.
WARNING: Never stop a tumble dryer before the end of the drying cycle unless all
items are quickly removed and spread out so that the heat is dissipated
• The lint trap has to be cleaned frequently, if applicable
• Lint must not to be allowed to accumulate around the tumble dryer
• adequate ventilation has to be provided to avoid the back flow of gases into the room
from appliacnes buring other fuels, including open fires.
• The appliance is not intended for use by young children or infirm persons without
supervision.
• Young Children should be supervised to ensure that they do not play with appliance.
If The appliance is supplied from a cord extension set or an electrical portable outlet
device, The cord extension set on electrical portable outlet device must be positioned
so that it is not subject to splashing or ingress of moisture.
5
S
pecification
Shipping Bolts
Power Plug
• If the supply cord is damaged,
it must be replaced by the
manufacturer or its authorized
service technician in order to
avoid a hazard.
Dispenser
Control Panel
Drum
Back of Washer
Cold Water Inlet
Door
Air Vent for Safety
Drain Hose
Adjustable Feet
Lower cover cap
Drain Plug
Drain Pump Filter
Name
Power supply
Size
Weight
Wash capacity (Max. Watt)
Dry capacity (Max. Watt)
Spin speed
Water consumption
Permissible water pressure
: Front loading washing machine
: 220-240V~, 50Hz
: 635mm(W) x 720mm(D) x 925(H)
: 80kg
: 12kg (2200W)
: 7kg (2200W)
: No Spin/400/800/1000/1200
: 96ℓ(8ℓ/kg)
: 0.3~10 kgf/cm2 (30~1000 kPa)
❋ The appearance and specifications may be varied without notice to improve the units quality.
❋ Specifications subject to change by manufacturer.
Accessories
Inlet hose (1EA)
6
Spanner
I
nstallation
Install or store where it will not be exposed to temperatures below freezing or exposed to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on
a carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other
vermin, pay particular attention to keeping the appliance and its surroundings in clean
condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the
appliance guarantee.
Transit bolts
The appliance is fitted with transit bolts to prevent internal damage during transport.
• Packing and all transit bolts must be
removed before using the washer.
When unpacking the base, be sure to
remove the additional packing support
in the middle of the base packing.
Washer
Packing Support
Base Packing
Removing transit bolts
1. To prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts along with the rubber bungs.
3. Take out the 4 bolts along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the spanner
for future use.
• If they are not removed, it may cause
heavy vibration, noise and malfunction.
• Whenever the appliance is transported,
the transit bolts must be refitted.
2. Unscrew the 4 bolts with
the spanner supplied.
4. Close the holes with the caps supplied.
7
I
nstallation
Installation place requirement
Drain Hose
Washer
Laundry
Tub
approx.
2cm
Level floor :
Allowable slope under entire washer is 1°
Power outlet :
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with more than one
appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear / 2cm : right & left side)
Do not place or store laundry products on top of
washer at any times.
They can damage the finish or controls.
Positioning
Install the washer on a flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
• Before placing the washer on tiles, apply a rubber mat under the feet.
• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar
materials under the washer.
• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an
insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be
inserted between the two appliance.
• The washer must not be installed in rooms where the temperature can drop below 0°C.
• Please ensure that when the washer is installed, it is easily accessible for the engineer in the
event of a breakdown.
• With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the
appliance is stable, and a clearance of approximately 20mm is left between the top of the washer
and the underside of the work-top.
• The installation instructions shall state that the openings must not be obstructed by a carpet if it
has ventilation openings in the base.
8
I
nstallation
Electrical connection
1. Do not use an extension cord or double adapter.
2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly
qualified person in order to avoid a hazard.
3. Always unplug the machine and turn off the water supply after use.
4. Connect the machine to an earthed socket in accordance with current wiring regulations.
5. The appliance must be positioned so that the plug is easily accessible.
• Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning. Contact your local service center
• Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst
under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
• If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing machine
at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
If this appliance is supplied from a cord extension set or electrical portable outlet device, the cord
extension set or electrical portable outlet device must be positioned so that it is not subject to
splashing or ingress of moisture.
Washing Machine is to be connected to the water mains using new hose-sets and that old
hose-sets should not be used.
Connecting water supply hose
Cold
Cold
water tap
Hose connector
Sealing
washer
▶Water supply pressure must be between 30kPa and 1000kPa (0.3~10kgf/cm2)
▶Don’t strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 800kPa, a decompression device
should be installed.
• Two rubber seals are supplied with the water inlet hoses these are in
order to prevent water leaks.
• Check water tightness of washing machine connections by turning
the tap completely on.
• Periodically check the condition of the hose and replace the hose if
necessary.
• Make sure that there is no kink on the hose and that it is not crushed.
• The instructions for appliances connected to the water mains by
detachable hose-sets shall state that the new hose-sets supplied with
the appliance are to be used and that old hose-sets should not be
reused.
▶When your washer has two valves,
• If the washer has two valves, the energy is saved by using hot valve.
9
nstallation
I
Normal Tap without thread & screw type inlet hose
1. Unscrew the fixing screw to
attach the tap.
Upper
Connector
2. Push the connector up till the
3. Push the water supply hose
rubber packing is in tight contact
with the tap. Then tighten the 4
screws.
Rubber
packing
vertically upwards so that the
rubber packing within in the hose
can adhere completely to the tap
and then tighten it by screwing it
to the right.
Rubber packing
Upper Connector
Upper Connector
Plate
Fixing screw
Water supply hose
Normal Tap without thread & one touch type inlet hose
1. Un tighten the upper connector
screw.
Upper
Connector
Rubber
packing
2. Push the upper connector up till 3. Connect the water supply hose to
the rubber packing is in tight
contact with the tap. Then tighten
the 4 screws.
the middle connector, pushing
the plate down.
Rubber packing
Fixing screw
Middle
connector
• In case the diameter of the
tap is large remove the guide
plate.
Guide plate
Connector
Upper Connector
Upper Connector
Middle connector
Plate
Water supply hose
• Turn the middle connector not
to have water leaked.
• Make sure that the rubber
seal is inside the hose
connector.
• To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose
connector
Rubber
seal
Used the horizontal tap
Horizontal tap
Extension tap
Square tap
10
• Your machine comes with only
cold water connection.
• Make sure that there are no
kinks in the hose and that it is
not crushed.
nstallation
I
This equipment is not designed for maritime use or for use mobile installations such as
caravans, aircraft etc.
Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the Plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of
suffocation ! Keep all packaging well away from children
Installation of drain hose
about 100 cm
• When installing the drain hose to a sink,
secure it tightly with a string.
min. 60 cm
max. 100 cm
about 145 cm
• Proper securing of the drain hose will
protect the floor from damage due to water
leakage should the drain hose become
loose.
about 105 cm
Laundry tub
about 100 cm
Hose
Retainer
about 145 cm
max. 100 cm
min. 60 cm
about 105 cm
max. 100cm
min. 60cm
Tie
strap
max. 100cm
min. 60cm
• The drain hose end should not be placed
higher than 100 cm above the floor.
• Proper securing of the drain hose will
protect the floor from damage due to water
leakage.
• When the drain hose is too long, do not
force back into the washer. This will cause
abnormal noise, malfunction, and water
leakage.
11
I
nstallation
Level adjustment
1. Adjusting the washing machine level properly prevents excessive
noise and vibration.
Install the appliance on a solid and level floor surface, preferably in
a corner of the room.
NOTE
Lock nut
Adjustable feet
Higher
Lower
2. If the floor is uneven, adjust the adjustable feet as required. (do
not insert pieces of wood etc. under the feet)
Make sure that all four feet are stable and resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
※ After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
NOTE
Adjustable feet
Adjustable feet
Timber or suspended type flooring may contribute to
excessive vibration and unblance errors.
In the case that the washing machine is installed on a raised
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
❊ Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the
machine should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
• The installation surface must be clean, dry and level.
• Install washer on a flat hard floor.
Tile floors (Slippery floors)
• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into
70x70 mm sections and stick the pieces on to the dry tile where machine is to be placed.)
※ Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.
Wooden floors (Suspended floors)
Rubber Cup
• Wooden floors are particularly susceptible to vibration.
• To prevent vibration we recommend you place rubber cups under each
foot, at least 15mm thick under the washer, secured to at least 2 floor
※ It can be purchased from
hardware suppliers.
beams with screws.
• If possible install the washer in one of the corners of the room, where the floor is more stable.
※ Insert the rubber cups to reduce vibration.
※ Rubber cups ( p/no. 4620ER4002A) can be purchased from the LG spare parts department.
Important!
• Proper placement and levelling of the washer ensures long, regular and reliable operation.
• The washer must be absolutely horizontal and stand firmly in position.
• It must not “Seesaw” across corners under load.
• The installation surface must be clean, free from floor wax and other lubricant coatings.
• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
12
C
are before washing
Before the first washing
Select a cycle (COTTON 60°C, add a half load of detergent) allow the unit to wash without clothing.
This will remove residues from the drum that may have been left during manufacturing.
Caring before washing
1. Care Labels
Look for a care label on your clothes. This will tell you about the fabric content of your garment and
how it should be washed.
2. Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can
occur causing discoloration of white etc. If possible, do not wash heavily soiled items with lightly
soiled one.
Soil (Heavy, Normal, Light)
Separate clothes according to amount of soil.
Color (White, Lights, Darks)
Separate white fabrics from colored fabrics.
Lint (Lint producers, Collectors)
Wash lint producers and lint collectors
separately.
3. Caring before loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
• Check all pockets to make sure that they are
empty. Items such as nails, hair clip,
matches, pens, coins and keys can damage
both your washer and your clothes.
• Close zippers, hooks and strings to make
sure that these items don’t snag on other
clothes.
• Do not be stuck between the door and the
glass.
• Pre treat dirt and stains by brushing a little
detergent dissolved in water onto stains like
collars and cuffs to help shift dirt.
• If you wash underwear, use the wash cloth
bag. If you don’t use the wash cloth bag while
washing the underwear, wires in the bra may
make a noise.
13
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
• Main wash only ➔
• Pre Wash + Main Wash ➔
Detergent for Fabric
main wash softener
Detergent for
pre wash
2. Adding Fabric Softener
• Do not exceed the maximum fill line.
Close the dispenser drawer slowly.
Overfilling can cause early dispensing
of the fabric softener which could stain
clothes.
• Do not leave the fabric softener in the
detergent drawer for more than 2 days.
(Fabric softener could harden)
• Softener will automatically be added
during the last rinse cycle.
• Do not open the drawer when water is
supplied.
• Solvents(benzene, etc) are not
allowable.
NOTE
14
Do not pour fabric softener
directly on the cloths
A dding detergent
3. Detergent dosage
• The detergent should be used according to the
instruction of the detergent manufacture.
• If too much detergent is used, too many suds
can occur and this will decrease the washing
result or cause heavy load to the motor.
• Use powder detergent only for the front
loading washer.
❋ Tips
Full load : according to
manufacturer’s recommendation.
Part load : 3/4 of the normal
amount.
Minimum load : 1/2 of full load.
• Detergent is flushed from the dispenser
at the beginning of the cycle.
❇ If suds occur too much, pleas reduce the
detergent amount.
• Detergent usage may need to be adjusted
for water temperature, water hardness,
size and soil level of the load. For best
results, avoid oversudsing.
4. Water softener
• A water softener, such as Anti limescale
(Clagon) can be used to cut down on the
use of detergent in extremely hard water
areas. Dispense according to the amount
specified on the packaging.
First add detergent and then the water
softener.
• Use the quantity of detergent as for soft
water.
15
F
unction
Recommended courses according to the laundry type
Program
Cotton
Cotton
Quick
Synthetic
Delicate
Hand Wash
/Wool
Duvet
Quick 30
Wash + Dry
(7kg/7kg)
Baby Care
Fabric Type
Proper Temp.
(Option)
Rating
40˚C
(Cold, 30˚C,
60˚C)
- Pre Wash
- Rinse+Spin
- Bio
- Soak
- Intensive
- Water Plus
- Time Delay
6.0kg
40˚C
(Cold, 30˚C)
- Rinse+Spin
- Intensive
- Time Delay
Less than 3.0kg
- Rinse+Spin
- Intensive
- Water Plus
- Time Delay
- Rinse+Spin
- Dry Only
- Intensive
- Water Plus
- Time Delay
Maximum
load
10.0kg
60˚C
(Cold, 30˚C,
40˚C, 95˚C)
Cotton Which is lightly soiled.
40˚C
(Cold, 30˚C,
60˚C, 95˚C)
Delicate laundry easily damaged.
“Hand Wash” marked laundry
or machine washable woolens.
Cotton bedding with filling, duvet, pillow,
blanket, sofa cover with light filling.
Colored Landry which is lightly soiled fast.
A small amount of laundry which can be
dried.
Lightly soiled baby wear
Maximum
Load
- Pre Wash
- Rinse+Spin
- Dry Only
- Bio
- Soak
- Intensive
- Water Plus
- Time Delay
Color fast garments (shirts, night
dresses, pajamas...) and lightly soiled
white cotton (underwear...)
Polyamide, Acrylic, Polyester.
Additional
Option
30˚C
(Cold)
30˚C
(Cold, 40˚C)
3.0kg
Less than
6.0kg
60˚C
(Cold, 30˚C,
40˚C, 95˚C)
- Pre Wash
- Rinse+Spin
- Bio
- Soak
- Intensive
- Water Plus
- Time Delay
Less than
7.0kg
95˚C
(60˚C, 40˚C)
- Pre Wash
- Rinse+Spin
- Dry Only
- Bio
- Soak
- Intensive
- Water Plus
- Time Delay
5.0kg
❋ Water Temperature : Select the water temperature to the wash cycles. Always follow garment manufacture’s care label or
instructions when laundering.
❋ Intensive : When washing full load or heavily soiled laundry, you can increase effectiveness by choosing intensive option.
❋ Pre Wash : If the laundry is heavily soiled, “Pre Wash” option is recommended.
Pre Wash is available in Cotton, Cotton Quick, Synthetic and Baby Care, Wash + Dry Program.
16
H ow to use washer
1. Cotton automatically
selected upon power on.
• Press the Power(
) button to start.
• Press the Start/Pause(
• Initial condition
- Rinse : Normal
- Water temperature : 60°C
- Spin : 1200 rpm
- Program : Cotton
) button.
2. Manual Selecting
• Press the Power(
washer on.
) button to turn the
• Select the desired cycle with the program
dial and if required, make any changes to
the washing conditions by pressing the
buttons accordingly.
For selecting the each conditions, please refer
to the page18~page26
• Press the Start/Pause button to
commence the cycle.
17
H ow to use washer
(1)
(2)
(1)Button: Power
(2)Dial: Program
(3)Button: Start/Pause
(4)Button: Option
(3)
(5)Child lock
(6)Button: Rinse
(7)Button: Spin
(8)Button: Intensive
Power
(4) (5) (6)
(7) (8,9,10) (11)
(9)Button: Water Plus
(10)Button: Time Delay
(11)Button: Temperature
(12)Button: Tub Clean
(12) (13)
(13)Dial: Dry
Program
1. Power
• Press the Power(
on and off.
) button to turn power
• To cancel the Time Delay function, the
Power( ) button must be pressed.
• 9 programs are available according to the
laundry type.
2. Initial Program
• Dial lamp will light up to indicate selected
program.
• When the Power( ) button is pressed, the
washer is ready for Cotton program. And the
other initial conditions as follows.
• When Start/Pause( ) button is pressed,
the Cotton program is automatically
selected.
• So, if you want to advance into the washing
cycle without changing the program, just
press Start/Pause( ) button and then the
washer will proceed.
- By turning the Program dial, the program is
Selected in order of “Cotton – Cotton Quick
– Synthetic – Delicate – Hand Wash/Wool –
Duvet – Quick 30 – Wash+Dry – Baby
Care”.
■ Initial program
- Cotton Program / Rinse:Normal / 60°C/
1200rpm
18
For information regarding laundry type for
each program, please refer to page 16.
H ow to use washer
Start/Pause
Option
• By pressing the option
button, only one option
function may be selected.
NOTE:
Depending on the selected
program cycle, not all
Options may be selectable.
1. Start
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
1. Pre Wash
2. Pause
• If temporary stop of wash cycle is needed,
press “Start/Pause” button.
• When in Pause, the power is turned off
automatically after 4 minutes.
• Use this option for loads that need
pretreatment. This adds 16 minutes of pre
washing before draining.
- When using Pre Wash option, do not use a
liquid detergent for the main wash.
Use powder for the main wash.
• Available in Cotton, Synthetic, Baby Care,
Wash+Dry and Cotton Quick.
2. Rinse + Spin
• Use this option to rinse and then spin
3. Dry Only
• When you want dry only, select the this
option. Available in Baby Care, Cotton,
Quick30 and Cotton Quick.
4. Bio
• If you want to eliminate protein stains(milk,
blood, chocolate...), you may select Bio
function by pressing the option button.
5. Soak
• Use this mode to wash normal clothes or thick
and heavy clothes which are excessively dirty.
• Available in Baby Care, Cotton, Cotton Quick,
Synthetic and Wash+Dry.
19
H ow to use washer
Child lock
Rinse
• By pressing the Rinse
button, the Rinse type can
be selected.
- Normal
- Rinse+
- Medic Rinse
- Normal+Hold
- Rinse++Hold
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child lock can be set by pressing and
holding the Option and Rinse button
simultaneously. (About three seconds)
1. Normal
• Baby Care performs 4 Rinses
• Cotton (for full load),Synthetic,Duvet,
Hand Wash/Wool, Wash+Dry performs 3 Rinses
• When child lock is set, all buttons are
inoperable.
• To deactivate Child lock system, press and
hold the Option and Rinse button
simultaneously again.
(About three seconds)
• Cotton Quick, Quick 30, Delicate performs 2
Rinses.
2. Rinse+ & Medic Rinse
• Used to additional rinse, which may assist in
removing traces of detergent residue.
• By selecting Rinse+ or Medic Rinse
function, the Rinse Time and the Rinse
water are increased.
• To change to the desired program, whilst in
child lock mode.
1. Press and hold both Option and Rinse
button to cancel the child lock.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
Change
the desired
program
• The child lock can be set at any time and it
is automatically canceled when operational
errors occur.
20
• Medic Rinse heats the water to 40 Deg in
the last rinse.
3. Rinse Hold
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed to a Drain or Spin function after
a Rinse hold, select Drain on the program
dial or press the Spin button for the desired
speed, then press the Start/Pause button.
The matching indicator lamp will light up for
identification.
H ow to use washer
Spin
Water Temperature
• By pressing the Spin button,
the spin speed can be
chosen.
• By pressing the Temp.
button, the water
temperature can be
selected.
- Cold
- 30˚C / 40˚C / 60˚C / 95˚C
1. Spin selection
• Water temperature can be selected as
below according to the program.
• Spin speed is available according to the
program as follows.
- Baby Care
40˚C - 60˚C - 95˚C
- Wash + Dry
1000 – 1200
- Cotton & Cotton Quick & Wash + Dry
Cold - 30˚C - 40˚C - 60˚C - 95˚C
- Cotton & Cotton Quick & Quick 30
No Spin – 400 – 800 – 1000 – 1200
- Synthetic
Cold - 30˚C - 40˚C - 60˚C
- Baby Care & Synthetic
No Spin – 400 – 800 – 1000
- Delicate & Duvet
No Spin – 400 – 800
- Hand Wash/Wool
No Spin – 400
2. No spin
- Delicate & Quick 30 & Hand Wash/Wool
Cold - 30˚C - 40˚C
- Duvet
Cold - 30˚C
The required temperature lamp will light up for
identification.
For the more detailed information, please refer
to the page16.
• If “No Spin” is selected, the washer stops
after draining the water from the last spin.
The matching indicator lamp will light up for
identification.
21
H ow to use washer
Tub Clean
Tub Clean course can be set by pressing
‘Tub Clean’ button.
TUB CLEAN is special cycle to clean the
inside of the washer. This cycle uses higher
water level with higher spin speed. Perform
this cycle regularly.
How to use the Tub Clean cycle:
1. Remove any clothing or items from the
washer and close the door.
2. Open the dispenser drawer and add Anti
limescale (Calgon) to the Main wash
compartment.
NOTE: Do not add any detergent to the
detergent compartments. Excessive
suds may generate and leak from the
washer.
3. Close the dispenser drawer slowly.
4. Power On and then press ‘Tub Clean’
5. Press the Start/Pause button to start.
6. After the cycle is complete, leave the door
open to dry around the washer door
opening, flexible gasket and door glass.
! CAUTION
If there is a small child, be careful not to
leave the door open for too long.
22
Intensive
• When washing full load or heavily soiled
laundry, you can increase effectiveness by
choosing intensive option.
• By selecting the Intensive option, the wash
time may be extended, depending on the
program selected.
• To use this option press the Intensive button
once before the wash program is started.
H ow to use washer
Water Plus
Time Delay
• Adds extra water to rinse cycles for superior
results.
Preparing washing before starting “Time Delay”
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in
the drawer.
• How to set “Time Delay”
- Press Power(
) button.
- Turn the Program dial to select
the program you require.
- Press Time Delay button and set the
desired time.
- Press the Start/Pause(
) button.
(“
” lamp is blink)
• If Time Delay button is pressed, “3:00” is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
• Each pressing of the button advances time
delay by one hour.
• To cancel the time delay, press the
Power(
) button.
• Time Delay is ‘expected time’ from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
23
H ow to use washer
Dry
NOTE
The maximum drying capacity for this
model is 7kg. When loading, please
use the maximum drying capacity
indicator behind the door as shown
below.
• Do not overload above the maximum drying
capacity indicator. Items must be able to
tumble freely.
• This washer-dryer’s automatic process from
washing to drying can be selected easily.
1. Drying Automatic guide
• Use your Automatic Cycles to dry most loads.
Electronic sensors measures the temperature
of the exhaust to increase or decrease drying
temperatures for faster reaction time and
tighter temperature control.
• Recommend Automatic drying course for
clothes type.
a) Low Temp – Will use low temperature to dry
clothes that are heat sensitive.
b) Iron – Will leave clothes slightly damp, ideal
for ironing
c) Normal – Will dry clothes enough to be
removed and folded, ideal for everyday
clothes such as cottons.
d) More – Will ensure maximum drying
performance.
NOTE:
The estimated drying time varies from the
actual drying time when in the Automatic mode.
The type of fabric, size of the load, and the
dryness selected, do affect the drying times.
❋ The standard laundry weight which shows
how much laundry to put into the washer.
• For most even drying , make sure all articles
in the clothes load are similar in material
and thickness.
Sorts of
laundry
• By turning the dial, you can select.
Normal ➔ More ➔ 30 ➔ 60 ➔ 90 ➔ 120 ➔
150 ➔ Low Temp ➔ Iron.
Single
weight
• After the end of dry, “
” is displayed.
By pressing the “Start/Pause” button the
program can be ended. If you not press the
“Start/Pause” button, the “
” cycle will
end automatically after 4 hours.
24
Diaper
Shirt
Shortsleeved
100g
200g
300g
Sorts of
laundry
Single
weight
Underwear Nightclothes
50g
500g
Jean
1200g
H ow to use washer
2. Manual Drying time guide
• By turning the Dry button, the drying time
can be selected.
• Drying course can last up to 150min. When
selecting drying only, drying course will
start after spining, unless the spin omitted.
• These drying times are given as a guide to
help you set your dryer for manual drying.
Drying times can vary greatly depending on
dampness, room temperature and type of
fabric and your own experience will be your
best guide.
Woolen Articles
- Do not tumble dry woolen articles. Pull them to
their original shape and dry them flat.
- Some woven and loop knit materials may
shrinks, by varying amounts, depending on
their quality.
- Always stretch not these type of garments
immediately after drying.
Permanent Press and Synthetics
- Do not overload your dryer
- Take out permanent press articles as soon as
the dryer stops to reduce wrinkles.
Fiber or Leather Materials
Fiber glass
- Do not dry fiberglass articles in your dryer.
Glass particles left in the dryer could be picked
up by your clothes the next time you use the
dryer and irri tate your skin.
3.Completion of Drying
• When drying cycle is completed, “
”
[Cool Down] is displayed on the Multi
display.
• The Cool Down is set automatically when a
drying cycle is complete.
• Wrinkles and creases will form if the clothes
are not removed immediately after the
drying is completed.
• The Cool Down operates periodically by
tumbling. It rearranges and fluffs the load to
avoid wrinkles without heat for up to 4
hours.
• The “
” message will continue to display
until the clothes are removed or the
Start/Pause button is pressed within the
4 hours after the drying has been
completed.
Door Lock
- Always check the manufacture’s instructions.
Baby clothes and Night Gowns
- Always check the manufacture’s instructions.
Rubber and Plastics
- Do not dry any items made from or containing
rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
• Lights whenever the door of the washer is
locked.
• The door can be unlocked after a 2~3
minute delay, pressing the Start/Pause
button to stop the washer.
25
H ow to use washer
Display
3. Completion of washing
• When washing cycle is completed,
“
” is displayed on the “Multi display”.
1. Special function display
• When Child lock is selected, the “
displayed
• After the end of dry, “
4. Time left
” is
” is displayed.
• When time delay is selected, it shows the
remaining time before the finish of the
selected program.
2. Self diagnose display
• If the washer encounters a fault during
operation, the associated fault will be
displayed.
• During washing cycle, the remaining
washing time is displayed.
• Recommended program by manufacturer.
- Cotton : environ 2 heures et 26 minutes
- Cotton Quick:
environ 1 heure et 24 minutes
- Synthetic :
environ 1 heure et 37 minutes
- Delicate : environ 1 heure et 48 minutes
“
” : Water pressure sensing error
- Hand Wash/Wool:
environ 1 heure et 4 minutes
“
” : Problem of overfilling water
- Duvet : environ 1 heure et 33 minutes
“
” : Door is not closed
“
” : Over load in motor
- Quick 30:
environ 30 minutes
“
” : Water inlet trouble
“
” : Drainage trouble
“
” : Unbalanced load
“
” : Water temperature trouble
“
” : Dry heater or thermostat trouble.
If these error letters are displayed, please refer to
the troubleshooting page33 and follow the guide.
26
- -Wash + Dry (7kg/7kg):
environ 6 heures et 11 minutes
- Baby Care:
environ 3 heures et 32 minutes
• The washing time may vary by the amount
of laundry, water pressure, water
temperature and other washing conditions.
• If an unbalanced load is detected or if the
suds removing program operates, the wash
time may be extended.
(Max. increasing time is 45 minutes.)
M aintenance
❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock to
avoid electrical shock hazards.
❋ When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door
lock to prevent young children being trapped inside.
The water inlet filter
-"
" error message will blink on the control panel when water does not enter the
detergent drawer.
- If your water is very hard or contains traces of lime deposit, the water inlet filter may
become clogged.
It is therefore a good idea to clean it from time to time.
1. Turn off the
water tap.
2. Unscrew the
water inlet
hose.
3. Clean the
filter using a
hard bristle
brush.
4. Tighten up
the inlet
hose.
The drain pump filter
❋ The drain filter collects threads and small objects left in the laundry.
Check regularly that the filter is clean to ensure smooth running of your machine.
! CAUTION
First drain the water using the drain hose and then open the pump filter to
remove tangled threads or foreign objects.
Be careful when draining if the water is hot.
❋ Allow the water to cool down before cleaning the drain pump, carrying out emergency
emptying or opening the door in an emergency.
1. Open the lower cover
cap ( ) by using a
finger. Turn the drain
plug ( ) to pull out
the hose.
2. Unplug the drain plug ( ),
allowing the water to flow out. At
this time use a vessel to prevent
water flowing on to the floor. When
water does not flow any more, turn
the pump filter ( ) open to the left.
3. Remove out any foreign material
from the pump filter ( ). After
cleaning, turn the pump filter ( )
clockwise and insert the drain
plug ( )to the original place.
close the lower cover cap.
3
3
2
2
27
M aintenance
Dispenser drawer
❋ After a while detergents and fabric softeners leave a deposit in the drawer.
• It should be cleaned from time to time with a jet of running water.
• If necessary it can be removed completely from the machine by pressing the catch
downward and by pulling it out.
• To facilitate cleaning, the upper part of the fabric softener compartment can be removed.
The drawer recess
❋ Detergent can also accumulate inside the recess which should
be cleaned occasionally with an old toothbrush.
• Once you have finished cleaning, replace the drawer and run a
rinse cycle without laundry.
The washing drum
• If you live in a hard water area, lime scale may continuously build up in places where it cannot be
seen and thus not easily removed.
Over time the build up of scale clogs appliances, and if it is not kept in check, expensive
maintenance or repairs may result.
• Although the washing drum is made of Stainless steel, specks of rust can be caused by small metal
articles (paper clips, safety pins) which have been left in the drum.
• The washing drum should be cleaned from time to time.
• If you use descalling agents, dyes or bleaches, make sure they are suitable for washing machine
use.
❋ Descaler may contain chemicals that may damage part of your washing machine.
❋ Remove any spots with a stainless steel cleaning agent.
❋ Never use steel wool.
28
M aintenance
The water circulation nozzle & steam nozzle
• Clean the water circulation nozzle, if clogged.
Cleaning your washer
1. Exterior
Proper care of your washer can extend its life.
The outside of the machine can be cleaned with warm water and a neutral non abrasive
household detergent.
Immediately wipe off any spills. Wipe with damp cloth.
Try not to hit surface with sharp objects.
❋ IMPORTANT: Do not use methylated spirits, diluents or similar products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
NOTE
Remove hard water deposits using only cleaners labeled as safe for washing
machine.
Winterizing instructions
If the washer is stored in an area where freezing may occur or moved in freezing
temperatures, follow these instructions to prevent damage to the washer:
1. Turn off water supply tap.
2. Disconnect hoses from water supply and drain water from hoses.
3. Plug electrical cord into a properly grounded electrical outlet.
4. Add 1gallon(3.8L) of nontoxic recreational vehicle(RV) antifreeze into an empty wash drum.
Close the door.
5. Set spin cycle and let washer spin for 1minute to drain out all water.
Not all of the RV antifreeze will be expelled.
6. Unplug electrical power cord, dry the drum interior, and close the door.
7. Remove dispenser drawer, drain and dry excessive water from the compartments.
8. Store washer in an up right position.
9. To remove antifreeze from washer after storage, run empty washer
through a complete cycle using detergent. Do not add wash load.
29
roubleshooting guide
T
❋ This washing machine is equipped with automatic safety functions which detect and
diagnose faults at an early stage and react appropriately.
When the machine does not function properly or does not function at all, check the
following points before you contact your service provider.
Symptom
Possible Cause
Solution
Rattling and
clanking noise
• Foreign objects such as coins or
safety pins maybe in drum or
pump.
Stop washer and check drum
and drain filter.
If noise continues after washer
is restarted, call your authorised
service centre.
Thumping sound
• Heavy wash loads may produce
a thumping sound. This is usually
normal.
If sound continues, washer is
probably out of balance. Stop and
redistribute wash load.
Vibrating noise
• Have all the transit bolts and
packing been removed?
• Are all the feet resting firmly on
the ground?
If not removed during
installation. Refer to Installation guide
for removing transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
rearrange wash load.
Water leaks.
• Fill hoses or drain hose are loose
at tap or washer.
Check and tighten hose connections.
• House drain pipes are clogged.
Unclog drain pipe. Contact plumber
if necessary.
• There is something between
the gasket and the glass.
Clean the gasket and
the glass with the towel.
Over sudsing
Water does not enter
washer or it enters
slowly
30
Too much detergent or unsuitable
detergent may cause excessive
foaming which may result in water
leaks, and vibration during spin.
• Water supply is not adequate in
area.
Check another tap in the house.
• Water supply tap is not
completely open.
Fully open tap.
• Water inlet hose(s) are kinked.
Straighten hose.
• The filter of the inlet hose(s)
clogged.
Check the filter of the inlet hose.
T
roubleshooting guide
Symptom
Water in the washer
does not drain or
drains slowly.
Possible Cause
Solution
• Drain hose is kinked or clogged.
Clean and straighten the drain hose.
• The drain filter is clogged.
Clean the drain filter.
Washer does not start • Electrical power cord may not be
plugged in or connection may be
loose.
• House fuse blown, circuit breaker
tripped,or a power outage has
occurred.
• Water supply tap is not turned on.
Make sure plug fits tightly in wall
outlet.
Reset circuit breaker or replace fuse.
Do not increase fuse capacity.
If problem is a circuit overload, have
it corrected by a qualified electrician.
Turn on water supply tap.
Washer will not spin
❋ Check that the door is firmly
shut.
Close the door and press the
Start/Pause button. After pressing the
Start/Pause button, it may take
a few moments before the clothes
washer begins to spin. The door must
lock before spin can be achieved.
Door does not open
The door lock will only release
After 2~3 minutes, either at the
end of the cycle or after
pressing the Start/ Pause button
During a wash.
Once started, the door can not be
opened for safety reasons.
Wait one or two minutes before
opening the door to give the electric
locking mechanism time to release.
Display stuck
on 6min left.
This washing machine checks
the condition of the clothes at
6min left to evaluate if they are
dried or not. If the clothes are not
dried, the washing machine will
continue to dry for an extended
period. The 6 min display will then
count down after this period
Check the weight of clothes.
The weight of the clothes
should be less then 6kg.
Washer pauses for
longer intervals than
normal during
tumbling.
The bowl will tumble for 3 seconds
and then pause for 50 seconds
repeatedly for part of the wash
cycle. This is normal during the
standard course & Hand Wash &
Wool cycles.
❋ standard course: Cotton 40°C,
Eco-Steam, Intensive, RinseNormal, 1200rpm.
This action allows the more delicate
clothes to soak which assists in stain
removal.
31
roubleshooting guide
T
Symptom
Wash cycle time
delayed
Possible Cause
• It takes time to balance the
laundry before the spin cycle
Solution
The washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
Stop the wash and pull out the
laundry then put it again to untwist
Dry problem
32
• Does not dry
Do not overload.
Check that the washer is draining
properly to extract adequate water
from the load.
Clothes load is too small to tumble
property. Add a few towels.
T
roubleshooting guide
Symptom
Possible Cause
Solution
• Water supply is not adequate in area
• Water supply taps are not completely
open.
• Water inlet hose(s) are kinked.
• The filter of the inlet hose(s) are
clogged.
Check another tap in the house.
Fully open tap.
• Drain hose is kinked or clogged.
• The drain filter is clogged.
Clean and straighten the drain hose.
Clean the drain filter.
• Load is too small.
• Load is out of balance.
• The appliance has an unbalance
detection and correction system. If
individual heavy articles are loaded (ex.
bath mat, both robe, etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
• If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
Add 1 or 2 similar items to help
balance the load.
Rearrange load to allow proper
spinning
• Is the door opened or
not completely closed?
Straighten hose(s).
Check the filter of the inlet hose(s).
Close the door completely.
❋ If “ ”is not released, call for service.
Unplug the power plug and call for service.
• Water overfills due to the faulty water
valve.
Close the water tap.
Unplug the power plug.
Call for service.
• Water level sensor has malfunctioned.
• Over load in motor.
• Check water supply.
Turn the tap on
If
is not released, unplug power
plug and call service.
33
T
erms of Warranty
What Is Not Covered:
• Service trips to your home to teach you how to use the product.
• If the product is connected to any voltage other than that shown on the
rating plate.
• If the fault is caused by accident, neglect, misuse or Act of God.
• If the fault is caused by factors other than normal domestic use or use in
accordance with the owner's manual.
• Provide instruction on use of product or change the set-up of the product.
• If the fault is caused by pests for example, rats or cockroaches etc..
• Noise or vibration that is considered normal for example water drain
sound, spin sound, or warming beeps.
• Correcting the installation for example, leveling the product, adjustment of
drain.
• Normal maintenance which recommended by the owner's manual.
• Removal of foreign objects / substances from the machine, including the
pump and inlet hose filter for example, grit, nails, bra wires, buttons etc.
• Replace fuses in or correct house wiring or correct house plumbing.
• Correction of unauthorized repairs.
• Incidental or consequential damage to personal property caused by
possible defects with this appliance.
• If this product is used for commercial purpose, it is not warranted.
(Example : Public places such as public bathroom, lodging house, training
center, dormitory)
If the product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of a
defective part, shall be borne by the owner.
34
M emo
35
P/No.: MFL51768127
Download PDF

advertising