LG | WF-801STH | LG WF-801STH Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODELS
:
WF-901STH(P)
WF-801STH(P)
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
P/No.: 3828FA3630D
and quote this
require service.
cover
information to your dealer when you
Contents
Product Features
Innovated
washing wings
Page
Three small
washing wings generate strong and
sharp washing currents to clean laundry uniformly.
BASIC UNDERSTANDING OF WASHING MACHINE
Safety
Adjusted vertical movement and rotating direction of
the washing punch reduces laundry entanglement
and improves washing power.
Measure
.................................................................
Name of Each Part............................................................
5
Function of Each Button....................................................
6
Preparation Before Washing
Sensing Laundry Amount and Displaying
8
.............................................
Strong showering
Strong showering
ensure improved rinsing
removes
water
detergent
supply
and naps to
effects.
Water Level
.....
removing
Two lint filters catch naps and thread generated
washing to make the laundry cleaner.
naps
What is Softener
Program?...............................................
What is Showering Water Supply?....................................
Normal Washing................................................................
Blanket Washing
Baby Wear Washing..........................................................
Lingerie Washing
Delayed Washing
Other Washing
Water Level Setting and Amount of Detergent..................
..............................................................
during
..............................................................
..................................................................
High-intensity
stainless inner-tub
Spin bumpy side wall of the inner-tub, together with
rhythmic waves improve washing power by beating
and rubbing the laundry.
Speed up the results to improve drying.
By employing
a
strong spin method, laundry
becomes much cleaner.
2
10
10
12
14
16
18
20
22
24
How to Use Bleach............................................................
25
Proceeding of Washing Program
Basis of Selecting Each Button
26
......................................
.........................................
27
HOW TO INSTALL AND MAINTAIN
Installing the Washer.........................................................
Maintaining the Washer
Troubleshooting.................................................................
....................................................
Strong spin
9
HOW TO USE WASHING MACHINE
...............................................................
Double devices for
4
28
36
38
COMMON SENSE FOR WASHING
Common Sense For
How to
Washing
Keep Clothes
...........................................
........................................................
3
40
41
Manufacturer is not
user's
responsible
for accidents caused
by the
result of not
user as a
the
following
guide
In
§
Name of Each Part
Measure
Safety
Operation
§
Do not insert the hand inside the inner-tub durHands may get
ing operation.
in the laundry.
Avoid
area
humidity is
caught
switch
If the machine does not
exposed to
high. Avoid
It may
electric shock or
stop
area.
snow,
rain,
or
30
where
water-contact to the
Powder
detergent box
for delayed washing
Safety
Do not let children climb
on
top of the machine
§
or
supply cord is
damaged, it must
be replaced by the
climb into the inner-tub.
manufacture
Electric Outlet
Avoid
connecting
single
outlet. It may
several electric devices into
cause a
plug
If the
High-intensity stainless washing tub
repair.
Children's
§
Drain hose holder
Power
contact A/S center
for
Refer
Power switch
cause
malfunction.
operating up to 15 seconds
after opening the lid, stop
using the machine and
Water hose
Showering supply device
Installation Area
a
service agents
Bleach inlet hole
fire.
25
Do not let children insert the hand
its
or
or
similarly qualified
person in order to
avoid a hazard.
Refer
into the bottom of the machine
where is
revolving part.
Injury may occur!
a
Level indicator
29
Drain hose
Refer
(Pump model)
33
Refer
Control part
Volatile Material
§
Do not wash
material such
cause an
fire
or
or
§
dry clothes stained with volatile
as
Benzene
or
Hot Water
Avoid
using hot water
plastic parts or cause
thinner. It may
6
Lint filter
Refer
36
50°C. It may deform
malfunctions.
over
Washing wings
explosion,
burn.
Vertical movement of
ed when
a
sufficient
washing punch can be operatamount of laundry is deposited.
Auto
adjustable
leg
28
(For non-pump)
33
Heat
§
§
Avoid electric heaters, candles,
bug smokers, etc., near
or deform plastic parts.
the
cigarette lighters,
machine. It may ignite
Before
the power cord, make
connect a circuit breaker. 34
connecting
ground or
Otherwise,
it may
electric shock.
sure
Refer
Accessories
to
Refer
cause
Circuit breaker
4
§
Grounding
Refer
Drain hose
Set the proper water level, an excessive amount of
water may increase entanglement of laundry.
50°C
Refer
or
Water
hose(2EA)
Drain hose
Height adjusting
plate(3EA)
5
NameofEchPrt
Function of Each Button
Changing
various functions is
possible only
in PAUSE state.
Selection button does not work when the washer is in
Detergent deposit
display 24 Refer
§
§
Wash power
Use it to
Upon loading laundry, it displays the correct amount of
detergent to be added according to the amount of
laundry(based on concentrated
detergent).
use
washing
level
button).
Wash process
§
display
water current.
Indicates the current
By pressing the button, it
cycles
[
]
Strength of the water current
can be adjusted at any pro-
status.
beginning,
MED[
].
How to
§
adjust the strength of
gram.
At the
§
operation(Except for water
Displaying abnormal operation
38
In
washing
Refer
case
of abnormal
operation,
the
indications
following
are
Wash:
displayed.
Use it to
Next step is lit, current step
blinks and finished step is turned
Abnormal water
Abnormal
drainage
off.
Abnormal
spin
:
supply
:
The lid is
opened
:
:
wash
rinse
wash
Abnormal water level
it starts with
+
+
+
rinse
lamps
spin lamps
rinse
spin lamps
+
sensing
:
generated
lamp
Use this function for
EX-LARGE
HOT
12
washing.
delay time.
the
button, it cycles
By pressing
[6 9 12 6]hours.(Upto
12 hours can be delayed)
To cancel delay time, turn the
LEVEL
6
WASH
MEDIUM
9
Use it to set the
WASH PROCESS
blinks.
RINSE
SPIN
SMALL
hour
80
NORMAL
20
4
7
BLANKET
15
3
5
BABY WEAR
10
2
3
LINGERIE
3
1
TINY
1
SOAKING
min.
min.
lamp
WATER
TEMP.
WASH
POWER
PROGRAM
RINSE
WASH
CHAOS
When
SPIN
rinsing or spinning only, Normal
is set to [Large] and Baby wear is set
to [Med] and Blanket is set to
[Ex-Large] automatically. Adjust the
water level as needed.
power switch off.
Spin:
Use it to
How to
§
adjust
the water level
By pressing the button, it cycles [LARGE
TINY
MED
SMALL
LARGE]
EX-LARGE
At NORMAL and BABY WEAR program, water level is
selected automatically based on the amount of laun-
dry.
Water level is set to LARGE for LINGERIE program,
EX-LARGE for BLANKET program.
Water level
in
6
can
operation.
be
minutes( You
program).
change the frequency of rinses.
rinse 3
By pressing the button, [rinse 2
rinse 4
water
(water supply rinse 1
2
rinse
water
rinse
3
supply
supply
water supply rinse 4)
off
rinse 1] are
If
the
[water supply] lamp is
repeated.
turned on, the water supply rinse is executed during the first rinse only.
Water supply lamp turns on during the
water supply rinse, and turns off at the
completion of the rinse.
When you select RINSE only, the operation starts with water supply.
NOTE
WATER
LEVEL
hard-
Use it to
START/PAUSE
RESERVATION
or
Rinse:
without
WATER
SUPPLY
SOFTNER
SHOWERING
LARGE
delayed
COLD
old
effectively.
cannot choose in LINGERIE
indication.
Refer
more
remove
time is about 80
Soaking
blink.
water level
alarm sound is
ened dirt
blink.
time.
change washing
SOAKING is used to
blink.
delayed
20
For manual wash,
rinse and spin
§
adjusted
even
when the washer is
§
How to select temp.
Use it to select hot
cold
hot water
water(When
only is selected, hot water is supplied for washing
and hot and cold water are supplied for rinsing).
or
In LINGERIE program, cold water is selected
automatically(Hot water may damage the fabric.)
§
Start and temporary
pause
Use it to start
Pressing
or
pause
temporarily.
the button repeats start and
temporary pause.
After 10 minutes in
a
temporary pause
state, the power will automatically turn
off.
§
How to select
22
a
change
the
washing
spinning
time.
program
Refer
Use it to select
washing programs.
By pressing the button, it cycles[NORMAL
ER
BLANKET
BABY WEAR
LINGERIE
+
+
BLANKET
SOFTENER
the final rinse.
SOFTENER
NORMAL
+
SOFTEN-
BABY WEAR
LINGERIE
SOFTENER]
setting indicates
SOFTENER
during
+
when to insert fabric softener
10
Refer
7
Functiofeahb
Care Before
Sensing laundry amount and displaying water level
Washing
Laundry Handling
§
Check
pockets for any
articles(They may damage
clothes or the washer).
Brush off dust and soil from
Check the label of the
clothes.
for the
washing
partial
stains before
41
Deposit laundry
and
2
1 press the START/
garment's
method. Clean
PAUSE button.
washing.
Without water, the pulsator
turns to the left and right for
about 4 seconds to
amount of
Refer
sense
3
the
A proper water level
and the amount of
detergent
played.
laundry.
is dis-
EX-LARGE
LARGE
MEDIUM
Wash colored and white clothes
separately.
Since
bulky and light laundry
float,
may
buy a washing net and
wash them a few at a time(parker, jumper, etc.).
SMALL
Since
stringed or long clothes
cause
may
entanglement, tie
them or use the washing net.
TINY
WATER
LEVEL
If either the inner-tub contains water
the
laundry is wet,
or
water level may be
different from the initial set
level.(It
malfunctioning. It is the proper
water setting for laundry.)
is
not
Bulky and light laundry may
Floating laundry may get damaged.
use a washing net, insert
after
detergent
dissolving it, so that
undissolved detergent will not be left
When you
It may come to increase the noise
but during spin, do not care about
it.
in the net.
Preparation
§
for
Connect the water
1 hose and then open
2
case,
§
manually adjust the
water level.
Example of deposition of detergent deposit based
on
the indicated amount.
Washing
Lower the drain hose.
cause a
water level lower than usual. In this
3
Connect the power
plug to the wall outlet.
The
following indication of the amount
(1 detergent cup: arround 40g)
of
detergent
is based
In
of
on a
concentrated
detergent.
the faucet.
EX-LARGE
HOT
COLD
SHOWERING
LARGE
case
MEDIUM
SMALL
Regular(high-density) detergent
TINY
much
WATER
LEVEL
8
tiny water level:
detergent(5/8 cup).
concentrated
WATER
TEMP.
as
uses
1.5 times
as
the indicated amount.
WASH
POWER
9
SensigLaudryAmotDplWv
What is the Softener
Program?
The washer sounds 'boo-'
during the final rinse to indicate the time for deposition of fabric softener.
(If you are not present after selecting softener program, washing completes normally without deposition
of fabric softener.)
1
Select
[Program+Softener].
2
When the final rinse starts...
After the final rinse water
3 (If you
did not
deposit
supply
fabric softener after
4
Washing
is
completed.
the first boozer sound, the boozer sounds for
the second time, and the washer waits for 3
SOFTNER
minutes)
NORMAL
The first indication
BLANKET
The second indication
BABY WEAR
LINGERIE
PROGRAM
Press the program button to select
[PROGRAM
AND
When the water
supply
starts to
times to indicate the time to
SOFTENER] simultaneously.
rinse, boozer sounds 20
deposition
the fabric softener.
Now open the lid, deposit fabric softener and then close the
lid. The rinse will start after the water supply is completed.
What is
This function is to
Showering
remove
substances like wastes of
Water
detergent
Showering
rinse.
10
fabric softener
during
WhatiseSofnrPgm?
the first indica-
fabric softener and press the START/PAUSE
button, rinse starts immediately(You don't have to wait for
three minutes).
If you
deposit
and naps.
same
water
deposit
Supply?
This function operates before rinsing, after washing and
draining(At this time, water supply and draining are performed at the
If you did not
tion, deposit it during the second indication.
time).
supply
function is
performed
before each
LINGERIE program does not have
CAUTION
showering water supply function.
The inner-tub may turn during the showering water supply. It is not malfunctioning.
If you select rinse only, showering water supply function does not operate during the
first
rinse.
11
Normal
Washing
operation, the washer completes washing cycles by itself. If adjusting wash time,
the number of rinses or spin times desired, adjust them in the PAUSE state.
If adjusting water level is desired, directly adjust it by pressing the "WATER LEVEL" button.
With one-time
1
Press the power switch.
Select the desired
2 program.
3
Deposit laundry.
4
Press the START/PAUSE button.
5
Deposit detergent
and close lid.
SOFTNER
NORMAL
ON
OFF
I
O
BLANKET
START/PAUSE
BABY WEAR
LINGERIE
PROGRAM
Press program button to select
either [NORMAL] or [NORMAL
SOFTENER].
For
+
laundry with fragile buttons,
etc., turn them inside out to prevent
The washer
senses
the amount of
laundry and
sets the
Deposit detergent
water level.
If the lid is not
damage.
based
on
the indicated amount.
closed, the machine
cannot start
spinning,
it generates the alarm sound.
Electric power automatically turns off 10 seconds after the
washing cycle
finishes with "boo-" sound.
In NORMAL program.......
Deposit laundry
NOTE
before
pressing
the START/PAUSE button.
The washer
senses
the amount and kinds of
laundry and
time, number of rinses and spin time by itself.
While sensing the most appropriate water level, each
If either the inner-tub contains water
NOTE
or
the
sets the most
water level
lamp
laundry is wet,
appropriate
water current, wash
blinks in turn.
water levels may become
Manually adjust proper water level before operating the washer.
Bulky and light laundry may cause a water level lower than usual. In this case,
higher.
manually adjust
the water level.
For
laundry that may easily be discolored, do not use [SOAKING] washing.
supply may be resumed about 2 minutes after starting the wash. It is
water level adjustment function.
Water
12
an
automatic
13
NormalWshing
Blanket
1
Washing
Deposit detergent.
2
Deposit
blanket.
3
Press the power switch.
4
Set to BLANKET program.
5
Close the lid.
6
Press the START/PAUSE
button.
SOFTNER
NORMAL
ON
OFF
I
O
BLANKET
START/PAUSE
BABY WEAR
LINGERIE
PROGRAM
Use the dissolved
detergent
in water
about 30°C.
Water level is
automatically set
[EX-LARGE]. Deposit proper
amount of detergent.
After
inserting blanket, press it uniformly for good washing results.
to
If the lid is not
Press program button and select
either
[BLANKET]
SOFTENER].
or
[BLANKET
cannot start
+
ates the alarm sound.
cally
set to
[
]
§
a
washing net in case of a cashmere quilt, since its lining may come out of the inner-tub
damaged.
washing light laundry like a cashmere quilt and bedspread at a high water level, a little bit
and become
When
of water may
In
out of the drain-outlet.
of
using a dryer,
detailed description,
case
For
come
Never wash carpet in the
[EX-LARGE]
when
washing completely finishes.
water level
Note: In Blanket
use
BLANKET
refer to the
drying program.
dryer user's guide.
washer(It may damage the washer and the carpet).
Program
Quilt:
Blanket:
Blankets made of 100%
washing
marks
synthetic fiber with hand
be washed.
can
Kinds:
Acryl
blanket: 100%
Mixed fabric blanket:
acryl(nylon coating)
cotton+polyester
Wool blanket: carded wool blanket
Weight:
14
Electric power turns off automatically
10 seconds after the alarm sounds,
wash power.
Never wash electric blanket.
Use
spinning.
It also gener-
In this case, the washer will automati-
and
CAUTION
closed, the machine
Less than
4.0kg
for
a
sheet
Following quilts
with hand
washing
marks
can
be
washed.
Fillings:
100% polyester
Weight: about 2kg(weight
than 3.5kg)
Size: smaller than 200
×
of the whole
quilt:
less
250cm
15
BlanketWshig
Baby
This function
can
Wear
be used for
Use this function to wash
1
Washing
a more
diapers
Press the power switch.
or
efficient rinse.
babies'
wear.
Select
Baby Wear
2 program.
3
Deposit laundry.
4
Press the
[START/PAUSE]
button.
5
Deposit detergent
and close lid.
SOFTNER
NORMAL
BLANKET
ON
OFF
I
O
START/PAUSE
BABY WEAR
LINGERIE
PROGRAM
Press program button and select
either
The washer will
automatically
set to 'three times' rinse.
Deposit detergent
[BABY WEAR]
[BABY
+ SOFTENER].
or
If the lid is not
WEAR
on
the indicated amount.
closed, the machine
cannot start
spinning
and generates the alarm sound.
CAUTION
To protect
When
the
16
based
laundry, do
not select
[
] wash power.
using neutral detergent or liquid detergent, deposit proper
[Instructions for detergent].
amount of
detergent
based
on
17
BabyWershing
Lingerie Washing
Use this function to wash delicate and weak laundries like
1
lingerie,
wool
Select LINGERIE
Press the power switch.
2 program.
fabric,
3
etc.
Deposit laundry.
Press the START/PAUSE
4 button.
5
Deposit detergent
6
Close lid.
SOFTNER
NORMAL
ON
OFF
I
O
BLANKET
START/PAUSE
BABY WEAR
LINGERIE
PROGRAM
Press program button and select
either
[LINGERIE]
SOFTENER].
or
[LINGERIE
For
laundry with fragile buttons, etc.,
If the lid is not
Use proper kind of detergent according to the type of laundry.
turn them inside out.
+
cannot start
closed, the machine
spinning.
It also generates
the alarm sound.
Electric power turns off automatically
10 seconds after the alarm sounds,
when
§
Do not select SMALL
CAUTION
Only
cold water is
When you
or
TINY water levels.
set(Hot
Laundry may get damaged.
Spread
damage laundry).
detergent for domestic dry cleaning, deposit proper amount of
based
on
the
'Instructions
for detergent'.
detergent
Use this program for delicate and weak laundries like wool clothes and lingerie(Wash clothes with
[WATER-WASHING] marks only).
Wash less than 2.0kg of laundry at a time.
use
Do not wash
be
neutral
water may
detergent
altogether with
or
white clothes,
bright-colored
easily discolored.
spin is 'weak' for LINGERIE program,
Since
How to
water may
clothes
drop
even
or
dark-colored clothes which
after
surface.
wool and
washing completely finishes.
dry wool and lingerie clothes
lingerie
clothes
on a
shady, flat
In
case
of
using a clothes hanger, wrap the upper
the hanger with a towel to maintain the
portion of
shape of the
neck
shoulder section.
or
can
spinning.
Weak wrinkles after
drying
can
be smoothed out
by ironing.
18
19
LingerWash
Delayed Washing
This
When
1
be used
conveniently for the every washing type.
you want to cancel reservation for delayed washing,
can
Press the power switch.
2
Select
a
switch the power off and start
program.
3
again.
Set the time.
4
Insert
and press
the START/PAUSE button.
laundry
5
Deposit detergent in the
powder detergent box.
6
Close lid.
SOFTNER
ON
OFF
I
O
NORMAL
12
BLANKET
9
6
BABY WEAR
START/PAUSE
HOUR
LINGERIE
RESERVATION
PROGRAM
Press the RESERVATION button to
set the time when the
ing
is
delayed wash-
completed.
Insert
laundry and press
Pull the
START/PAUSE button. The washer
senses
the amount of
displays
laundry and
the water level.
If the lid is not
powder detergent box forward and deposit displayed amount
of detergent. Then, push back the
cannot start
box.
If the lid is
How to set the
Example
1
:
To
RESERVATION button
in 9
hours(Time left
2
until the
completion of washing
is 9
hours).
Make
CAUTION
RESERVATION button
Press the RESERVATION button
delay time when you want
to finish the delayed washing(9
Press the RESER12
VATION button and
12
9
it will be lit
9
HOUR
[6].
6
HOUR
again
to set
In
RESERVATION
RESERVATION
to 12 hours of
deposit detergent in the powder detergent box.
detergent with the laundry for a long time, the laundry
lid is opened, delayed washing cannot proceed.
to
of power failure, set
to water
again
from the
After
water
may get
partially
discolored.
beginning.
supply conditions, washing
Remove any water from the powder
Moisture may harden the detergent.
delay is possible.
detergent
may be unable to be
box before
completed by
the preset time.
depositing detergent.
you can change the program, wash time, number of rinses,
and
water
level.
temperature
setting delay time,
spin time,
When you want to manually select the wash time,
number of rinses, water temperature, water level,
wash power and program, press the RESERVATION button,
and select them
you want. Then press
START/PAUSE button.
20
case
According
hours).
By pressing the button, it cycles
[9 12 6 9].
Up
sure
If you leave
When the
the
6
opened, delayed washing
proceed.
delay time
complete washing
on
It generates the
spinning.
alarm sound.
cannot
§
closed, the machine
as
How to wash when you go out
NOTE
When you cannot take the laundry out immediately after washing is completed,
select wash and rinse only(In this case, do not select spin to prevent wrinkles).
you'd better
21
DelaydWshing
Other
Washing
Use it to select the desired
washing
is
cycle among washing,
rinse and
spin,
or
to
repeat
§
Wash
20
4
7
15
3
5
2
3
1
1
10
3
min.
WASH
§
only
Press the WASH button to select the time.
Adjust the
4
7
3
5
2
3
1
1
WASH
according
OFF
80
O
only
20
4
7
15
3
5
10
2
3
1
1
3
min.
Adjust the
water level
according
Adjust
RINSE
the water level
If the water level is not
SPIN
Rinse and
4
7
15
3
5
2
3
1
1
10
3
min.
WASH
RINSE
to the amount of
laundry. 24
set to
to the amount of
selected, it is automatically
set to
selecting
rinse
only, it
The washer
displays the amount
detergent and begins supplying water.
[MED].
of
Refer
Close the lid.
Refer
START/PAUSE button.
[MED].
START/PAUSE
starts with water
supply.
spin only
Electric power turns off
Press the SPIN button to select the time.
26
Adjust the
water level
according
26
automatically
sounds,
when washing completely finishes.
10 seconds after the alarm
Refer
Refer
to the amount of
laundry. 24
selected, it is automatically
set to
CAUTION
Refer
[MED].
In
4
7
3
5
10
2
3
1
1
min.
WASH
lowed
In
15
RINSE
Press the SPIN button to select the time.
min.
SPIN
case
of
selecting RINSE
or
RINSE and SPIN, water will be
supplied before starting RINSE, fol-
WATER
SUPPLY
20
3
Press the
not be sensed.
min.
SPIN
the indi-
only [WASH or WASH+RINSE] is
selected, water will not be drained after
it is completed.
For draining, press the SPIN button
fabric softener... Select the SOFTENER program,
then it indicates the time for depositing fabric softener.
laundry will
on
If
Refer
laundry. 24
based
cated amount.
Refer
Spin only
80 SOAKING
22
26
deposit
If the water level is not
§
Deposit detergent
Press the RINSE button to select the number of rinses.
WATER
SUPPLY
20
START/PAUSE
min.
When
80 SOAKING
and close the lid.
Refer
selected, it is automatically
according
In this case, amount of
§
START/PAUSE
button.
Refer
[MED].
Press the RINSE button to select the number of rinses. 26
To
WASH
set to
Press the RINSE button to select the number of rinses.
WATER
SUPPLY
SOAKING
selected, it is automatically
min.
SPIN
RINSE
Rinse
laundry. 24
Deposit detergent
only
If the water level is not
§
to the amount of
Press the WASH button to select the time. 26
WATER
SUPPLY
15
min.
water level
If the water level is not
20
3
Refer
Press the
SPIN
RINSE
80 SOAKING
26
min.
Wash and rinse
10
Deposit
laundry.
WATER
SUPPLY
80 SOAKING
power switch.
I
of them after
completed.
Press the
ON
one
(Each button pressing cycles
3 min.)
5 min.
26
7 min.
water will not be drained after
Refer
Off
by SPIN.
of selecting RINSE only,
case
1 min.
Check
pockets
belongings.
for
If the lid is not
completely closed,
the washer generates the alarm
sound.
RINSE. To drain water, select
SPIN.
If the water level is not
is
automatically
set to
selected, it
[LARGE].
23
OtherWasing
Water Level and Amount of
Water
Amount
Level
of Water of
EX-LARGE
81L
LARGE
67L
MEDIUM
54L
Amount
laundry
Amount of
8.0kg
Less than
4.2kg
Less than
3.0kg
Detergent
How to Use Bleach
§
How to Use Bleach
Always separate clothes
Concentrated
Less than
Detergent
deposit bleach through
For powder bleach dissolve it with water and deposit it into the tub.
Make sure that the bleach does not touch the laundry.
For a detailed description, refer to the "Directions for bleach".
Regular synthetic
About
54g
About
81g
About
45g
About
67g
About
36g
About
54g
to be bleached and then
Bleach
deposit
the bleach
deposit
hole.
hole
SMALL
45L
TINY
41L
2.0kg
Less than
1.0kg
About
30g
About
45g
About
27g
About
41g
NOTE
deposit bleach directly into the laundry
(The laundry may get discolored or damaged).
Separately bleach colored clothes and synthetic
HowtUseBlach
Do not
Less than
textiles.
Concentrated
detergent: 20g per 30 liters of water.
Regular synthetic detergent: 30g per 30 liters of water.
When sensing water levels automatically, the amount of
even
For
water can differ
according
to the amount of
laundry
at the same water level.
synthetic detergent,
use one
that generates less bubbles. This type of
detergent
is
specially designed
for
washers.
In
case
deposit
CAUTION
of
using liquid detergent,
water(detergent: water=1:1)
If you use laundry soap(natural resin) for a long time, dirt
the inner-tub wall and cling to laundry during washing.
Using
24
dissolve it with
and
deposit
it
through
the bleach
hole.
excessive amount of
detergent
separated
from
may reduce the rinse effect and
laundry may remain
pollute
on
the environment.
25
Proceeding of Washing Program
Basis of
SOAKING function
In addition to full-automatic
be selected in every
program(except lingerie program).
The following times for a washing program are based on a simultaneous supply of cold & hot water at the pressure of
2.5kgf/cm2 and normal draining. Therefore, the time can differ according to water pressure and draining conditions.
Course
can
Auto water
level setting
Wash
EX-LARGE
Normal
Rinse
Spin
Water
rinse
supply
is only for
1-7min.
3-20min.
as
desired. When the
making changes.
Water LEVEL selection
§
Water level is set
3 times
1-7min.
20-96min.
SMALL
automatically after sensing the
amount of
laundry is high
or
low, press the WATER
Strong
Heavily-stained clothes
Medium
Normally-stanied clothes, cotton, yam, synthetic fabric, thin clothes
Weak
Lightly-stained
clothes
For LINGERIE program, water current is
To dissolve
EX-LARGE
the washer before
select other functions
supply selection
EX-LARGE
Blanket
user can
the first rinse.
SMALL
Baby Wear
the
HOT
COLD.
HOT, COLD
By pressing the button, it cycles COLD
Even when only HOT is selected, COLD and HOT water is supplied simultaneously during the RINSE cycle.
At LINGERIE program, only COLD water is used.
(min)
18-96min.
washing,
operation, pause
Water
§
Total time
2 times
3-20min.
washer is in
Each Button
Selecting
15min.
2 times
7min.
61min.
detergent,
the washer starts
separately adjusted to a very gentle one to prevent damage to clothes.
operating at a level which is one step lower than the preset water level.
Wash selection
§
SOAKING
80min.
Heavily stained clothes
10-20min.
20
Heavily stained clothes, thick clothes
10-20min.
Lingerie
3min.
LARGE
2 times
1min.
33min.
Normal clothes, cotton, yam,
10-15min.
Soft clothes, delicate clothes,
3-15min.
3
synthetic fabric, normally-stained clothes, thin clothes
lightly-stained
clothes
Actual wash time may differ
Total time may become
drainage condition.
Total time may become longer when there is a larger amount of laundry.
Remaining time will be reduced as washing is progressed.
In case of the SOAKING, total time is added to 80mm.
longer
under
a
bad water
supply
For LINGERIE program,
and
according to water level.
washing wings revolve very slowly(to prevent shrinkage
and
damage).
Rinse selection
§
Water
supply rinse
Water
Rinse 4
supply
rinse is
only for the first rinse.
Heavily stained clothes
Rinse 3
Normal clothes, cotton, yam,
Rinse 2
Rinse 1
Spin
§
clothes
selection
7
5-7min.
Thick clothes
5
3-5min.
Normal clothes,
3
1-3min.
Soft clothes
1
26
Lightly-stained
synthetic fabric, normally-stained clothes, thin clothes
1min. at low revolution
speed
For LINGERIE program, the tub turns very
light clothes, thin
clothes
slowly and spins for a very short time
(to prevent damage to clothes).
Clothes to be ironed, delicate clothes
27
BasiofSelctngEhu
the Washer
Installing
Improper
installation of the washer may cause noise and malfunctioning.
ventilating openings in the base area must be obstructed by carpeting when the
1. The
CAUTION
machine is installed
2. Install the
washing
on a
carpeted
machine
on a
floor.
1
level and firm
surface, any tilt should be less than
5°.
Installation
area
Install the washer
§
How to
adjust
washing
on
2
flat and firm surface.
level
Checking
level
3
Open the lid, and check if the washer
eled by looking down from the top.
Adjust the drop of the level indicator
4
Horizontal
setting
5
correctly lev-
Check if installation surface is tilted.
(Try to shake the washer and check
firmly installed.)
if the washer is
to the red circle.
level
Confirming
Distance between drain hose and the wall
Distance between drain hose and the wall should be
Place the washer to
Lift up the front of the washer and
the level indicator to the center by
level
adjustable legs clockwise
firm the
or
adjust the drop of
turning the
using the adjusting plate.
is
Checking slope
as
in
figure
level.)
2.
original position and confirm the
(Try to shake the washer and con-
than 10cm, and the distance between the other part
rear part and the wall should be more than 2 cm.
more
or
the
More than 2cm
Check the location of the
level in the front of washer.
Adjustable leg
More than 2cm
More than 10cm
Turn the
adjustable legs
horizontal(2EA).
§
Horizontal
Location of
to set the washer
setting
How to
Cause
drop
When the front is lower.
When the
rear
is lower.
When the left is lower
When the
(Example)
28
right
is lower.
drop of the level
supporting plate, and
To
move
10
mm
the
How to
adjust
Use the
use
the
adjusting plates
adjusting plates
to level the washer when the
adjustable leg's
cannot cover the gap.
Adjust the front adjusting plate with the adjustable
legs(2), or adjust the adjustable legs.
Adjust the rear adjusting plate with the adjustable
legs(2), or adjust the supporting plate.
Adjust the left part of the front and
plates or the supporting plate.
rear
Adjust the right part of the front and
plates or the supporting plate.
indicator
turn the
adjusting
rear
adjusting
by 1.5 mm: Use two adjusting plates
adjustable legs 2-3 times.
Use
and
a
adjusting plate by pilling
them up to cover the gap,
when necessary.
29
InstaligheWr
Installing
the Washer
How to connect the faucet
§
connector
Guide
ring
Rubber
packing
Disconnecting
the middle connector
1 from the drain hose
Push the connection
down
coupling
as
in the
figure.
Disconnecting
the middle connector
2 from the drain hose
Disconnect the water hose
hose while
connection
pressing down
coupling.
by pulling down the
on
water
the
Loosening fixing
3
Loosen the 4
fit it
on
fixing
screws
screws
of the faucet connector to
the faucet.
Faucet
connector
Connecting
coupling
Middle connector
When the faucet diameter is
When the faucet diameter is
big
or a
big...
rectangular
faucet is used, unscrew the four fixing
remove the guide ring as in No. 3.
screws
and
4
Push up the faucet connector
Push the connector up to the faucet and make
that the rubber packing inside the connector is
pletely
half-tightened(4 mm).
About 4
the connector
While the rubber
faucet, slightly
packing is completely attached to
screws(facing the wall) to
6
the
fasten 2
Tightening fixing
of the
con-
nector
Tighten
up
screws
on
the two
screws
marked below, while
pushing
InstaligheWr
the faucet connector.
If you cannot use a screw driver
due to a narrow space, tighten
the two
screws(facing the wall)
they touch the faucet
slightly and then insert.
Connector
packing
5
Fixing
touch the faucet.
ring
Rubber
com-
attached.
Check if the middle connector is
Guide
sure
Connecting
coupling
until
mm
Check
Middle connector
7
Tightening
the middle connector
8
Turn the half-loosened middle connector to the
right(see no.4)
and
visible part of the
tighten
screw
it to make the
length
Connecting
dle connector
Push down the
of the
the water hose to the mid-
connecting coupling
of the water hose
9
Connecting
the middle connector and
water hose
Insert it to the middle connector and then let it go.
from the middle connector.
threads less than 3mm.
10
Checking
connection of the water
hose and middle connector
Connect the water hose to the washer, and then
there is any leakage after opening the faucet.
If there is
from
leakage, close the faucet
No.1. (Improper installation of
No.4 and No.7 may
and start
see
again
cause
leakage.)
Less than 3mm
Middle
Check
connector
Middle connector
30
Connecting
coupling
31
if
the Washer
Installing
How to connect the
§
1
water hose
Remove caps
on
How to connect the drain hose
§
Removing caps
1
the valves.
Insert the drain hose to the
the
connecting
area
Push the hose
at
2 figure(Push
body.
directed to the
Valve connector
clip to the body to tighten it as in
making the hose clip be
bottom).
the
the hose,
Cap
Non-pump
Keep
it downward while the
Ensure the hose is free
You
no
can use
the cold water hose
only, when there is
hot water faucet.
Less than 6cm
Less than 2m
2 Checking
rubber
packing
of the
connector
Make
sure
that the rubber
packing
is inside the
valve connector.
When there is
no
3
Checking
inside of the washer
or
packing,
machine is
Less than 10cm
The hose is clogged
alien substances.
The hose is
over a
Cold water hose and hot water hose have
check the
respectively.
Orange
a
Make
placed
doorsill.
sure
that the
hose is not crushed.
blue
color
Make
contact a
sure
that the hose
is not crushed between
Curve
Less than 3m
0.9~1.3m
Blue color
The hose is
clogged by
alien substances.
Avoid
end of hose.
packing.
Rubber
Valve connector
submerging
the
Extension hose is
Make
used.
curved. Curves may get alien
substances stuck and disable
How to
upright
and then
tighten completely.
that the hose is not
change the direction of drain hose
The drain hose is installed at the
the valve connector to
sure
drainage.
packing
§
5
Tightening
Slowly tighten
by turning it in
the valve connector
the valve connector
a
clockwise
1
Untighten the screw
securing the drain
hose and 4 screws
securing the back
cover.
2
right
side of the washer. To install at the other side, refer to the
the direction
of the drain hose to
opposite side. Do not
let the drain hose be
kinked.
Change
3
direction 2-3 times, while
holding the hose.
the screw to
the drain
hose (Make sure that
the hose does not
touch the case or
other surrounding
Tighten
secure
4
following
method.
Reassemble the
back cover.
parts).
Screw securing Screw
the drain hose
Change
32
clogged
substances.
the wall and the washer.
rubber
Set the valve
The hose is
Do not mix them.
Water leaks without the
4 the washer
by
by alien
Service Center.
Connecting
working.
colors
and orange color,
rubber
washing
from kinking
Pump
Check out if the drain hose is hung
up to proper location for drainage.
Do not use an extension hose.
The discharge height is approximately 0.9~1.3mfrom the floor.
Screw
Inner drain hose
the direction at the back of the washer. If you
Screw
Back
change
cover
it at the front, water may not drain.
33
InstaligheWr
the Washer.
Installing
Make
CAUTION
§
sure
to connect the
Otherwise, it may
How to
cause
ground
When the fuse needs to be
wire.
ground
contact
a
Service Center
(It may
cause
electric
shock).
electric shock!
ground
If AC outlet with
changed,
How to
§
terminal is used,
grounding
is not need.
1
Ground Terminal
change the fuse.
Disconnect the power cord.
Turn the
right fixing
2 of the washer
the left
screw
to
Fixing
Out let
at the front
to loosen it.
screw
Grounding is
not needed
§
Other
Connect the
grounding method
Connect the
ground wire to the
ground copper plate and then
bury it under the moist ground at
least 75cm deep.
ground
ground
wire to the
terminal at the outlet.
installing it in an area
where grounding is not possible,
purchase a short-circuit breaker(15mA at operation, 7.5mA at
idle) and connect it to the outlet.
When
3
Pull forward
on
the
right panel
to open
it. Take out the fuse holder.
Remove the fuse from the fuse holder
4 and change the fuse with
Changing
new one.
the fuse
Fuse holder
ground
ground
wire
wire
Short-circuit breaker
Insert
75cm
a new
fuse into the fuse holder
5 and put it back
ground copper plate
to the
original place.
Fuse holder
§
Place where
Never connect the
There is
no
ground
6
Push back the
to close it
and
to the
tighten
a
right panel
fixing screw
Fixing
right.
screw
grounding should be avoided
ground
wire to gas
effect in the
pipes,
water
pipes, lightning
arrest or
telephone
outlets.
plastic water pipe.
Gas
pipe
Use
Ground wire
CAUTION
a
fuse which meets the
Specifications:
specifications.
Fuse is available at Service Centers.
110~120V: 125V, 12A
220V~240V: 250V, 6A
34
35
InstaligheWr
the Washer
Maintaining
When the water
supply is bad, check substances
clogged with dirt, water cannot flow
like stone
If the filter is
into the washer. Clean the filter
1
sand inthe filter.
regularly.
the filter in the inlet valve
Cleaning
§
or
Plug out the power cord from
the outlet first.
2
Pull out the filter from the inlet
valve with
a
tool.
To prevent freeze in winter
§
3
Use
a
tooth brush to get rid of
Close faucet and
1
filth. Insert the filter.
remove
the water
hose. Direct the hose toward the bottom and
completely remove water
2
from the hose.
the lint filter
Cleaning
1
Press and then
pull
forward
the lint filter from the
tub to the
arrow
washing
direction.
2
Turn inside out and wash it to
remove
dirt.
3
Insert it back into
1
worn
out, etc., contact
a
LG Service Center for
remove
water from the tub and drain
the power cord.
3
Unplug
3
Submerge
hose.
Pour 50°C of hot water
faucet and
remove
on
the
the water
hose.
2
Pour 50°C of hot water inside
the tub and leave it for 10 min.
the
separated
hose
in 50°C of hot water
place("Click").
4
When the lint filter is
spin
for 1 min. to
When frozen
§
§
Press the SPIN button and let
it
a new one.
Connect the water hose to
5
the washer and then start
the washer. Pour 50°C of
hot water into the water
Maintghewsr
Connect the water
hose to the faucet
and check if water
is
draining.
hose.
Clean the pump
§
1
Unfasten 4
screws
of the back
cover.
casing(when drainage is bad)
2
Turn the cap to the arrow
direction and unfasten it.
3
Reassemble the cap to the
direction and fasten it.
arrow
¢" Stainless steel inner tub won't be rusted.
CAUTION
However, external
Metal
product(like hairpin,etc,)
Water with
Water
rust may
or
a
that
cling
can
to it in the
following
causes:
be rusted is left inside the tub for
lot of iron substance is used for
a
long
a
long
time.
time.
chlorine type bleach is left inside the tub for
a
long
time.
¢" If rust is
CAUTION
36
:
Check it
over
if water leaks after
reassembling.(Rubber ring
is in the
cap)
found, soak sponge or soft cloth with cleaner
(neutral cleaner) and wipe the rust.(Never use metal sponge)
37
Troubleshooting
If
a
abnormal
symbol appears
in the
display window,
check the
following
before
asking
for
ser-
vice.
SYMPTOM
SYMPTOM
ITEM TO BE CHECKED
Abnormalevel
ITEM TO BE CHECKED
sensing
Ask for service center
Abnormal faucet
water
Abnormal Is
this time, the
of
(At
lamps
[WASH], [RINSE] blink.)
supply
(At this time, [WATER
LEVLE] lamp blink.)
Is
the faucet frozen?
the faucet
Is water
closed?
discontinued?
supply
lowered
Is the water pressure
or the filter
water hose is connected to the cold
clogged?
valve?(In this case,
Is hot water selected when
only a cold
select cold
No power
water.)
ON
OFF
I
O
(For Non-Pump)
Abnormal
drainage
Is the power switch
pressed?
Is the power
connected?
plug firmly
Is power supply is correct? Is the short-circuit breaker closed?
(At this time, the lamps of
[RINSE], [SPIN] blink.)
Abnormal
Is the drain hose low-
Is the drain hose bent?
Is the drain hose
ered?
Is the doorsill too
frozen?
high?
No
START/PAUSE
operation
spin
Is the lid closed and
(At this time, the lamps of
[WASH], [RINSE], [SPIN]
blink.)
Opened
Is the
laundry gathered
to one side?
Is the washer tilted?
Is the tub filled with
the START/PAUSE
required
button is
water?
pressed?
amount of
Excessive vibration
and noise
during spin
lid
Is the washer installed
(At this time, buzzer sounds
without lamp indication)
38
Is the faucet closed?
Is the lid closed? If the lid is open,
generated and rinse and
alarm is
spin
cannot be
proceeded.
Is the lid closed after
setting delayed
washing? If the lid is opened, delayed
washing cannot be proceeded.
Water
supply and rinse after
pausing it during rinse or spin.
It is normal, the washer is
one
No
on
firm and level surface?
automatically correcting the laundry gathered
to
side.
special
action is needed.
39
Troubleshting
Common Sense for
§
How to
remove
stain
Shoe
Ink
Wash
Warm water with 1% of
polisher
§
Remove fat with benzene
or
ink
oxalic
acid(2-3 times)
Red
warm
neutral
water with oxalic
stamping
ink
acid
soap
detergent(according
After
1
to
After
wearing
wearing pants, spray
in the
shape
lightly. The pants
next morning.
2 When hanging pants,
Remove fat with benzene
water on knees and
then shake them
bleach
textile)
Rust stain
Wash in
Keep Clothes
How to
Washing
soap
will be in
hip,
good
do not bend knees. Just
hang
down.
upside
liquid ammonia(ammonia 5%)
Stemp
Blood
Cold water
Sweat
Soap
Wash
or liquid ammonia
(old stain)
(Do not use hot water. It may solidify blood.)
Red ink
Wash
Terepin oil
(old stain)
Bleach
Juice,
Neutralize with alkali
Venegar
detergent
drycleaning
cream
or
water with neutral
detergent
2 Moisture
volatile oils
with
a
Warm
ice
remove
special
detergent or
drycleaning
soybean
§
sauce
Wash with soap in
warm
water
domestic
use
1
clean with alcohol
For
fur is
exposed
Remove fat with
water, detergent, detergent for
benzene¡ soap
3 When
4 When
Bond
Clean with alcohol
ammonia. For oil stain,
fur is
pressed,
the whole
Wash
soap,
To prevent
bottom of
40
detergent
first test
laundry,
damage
laundry with white cloth
to
or
or
on
alcohol
the inside of
bleach(according
laundry,
and then
out cloth or gauze soaked with benzole.
moisture, wipe it with
a
dry cloth and dry
in
a
shake it, spray
a
little bit of water,
to
remove
in
shady place
of the fur.
narrowly dented comb
a
a
to
eggs of worms and alien substances. Beat it with a rod and
repeatedly rub the fur with cotton soaked with formalin. Dry it in a
cause
Put
6 The
covering
a cover
30 min. and comb it
the
with
good
most
7 Cover
again.
fur clothes, shake off dirt and
ventilation and
insecticide with
hang
temperature and
appropriate
respectively. During rain
type of textile)
stain after
opposite direction of the wave
process again, when necessary.
dry
remove
(benzene, aceton)
stain when you do not know the
benzene
to rain or snow, shake it to remove
fur is worm-eaten, comb with
5 When keeping
remove
tightly wrung
and comb the fur in the
benzene, carbon tetrachloride, alcohol
How to
clean with wet but
shady place.
Lipstick
shady place for
§
for leather.
lightly-stained clothes,
2 When
synthetic detergent
drycleaning, liquid
cream
leather. Clean the leather
Maintaining fur clothes
Repeat
use
damage
with
Coffee,
for domestic
Remove fat with benzene
For water stain,
can
benzene
Butter
Petrolic
Solidify with
for domestic
Remove fat with benzene
or
Remove dirt with soft cloth.
Gum
Neutral deter-
ammonia, soap)
gent
water(liquid
Maintaining leather clothes
1
Paint
Alcohol(benzene, aceton)
Ice
§
a
season
with
hang
it in
a
humidity
higher
than
it
on a
hanger specially designed
for fur clothes.
spacious place.
keeping fur clothes is 15°C and 50-60% humidity,
66% humidity, often ventilize the fur.
for
cloth and put it in the closet. Use
one
kind of insecticide, if
possible.
towel.
41
HowtKepClhs
Memo
Specification
966mm
632mm
607mm
Water pressure
:
30~1,000kPa(0.3kgf/cm2~10kgf/cm2)
Revolution
speed of
the
Revolution
speed of
the tub
wings
:
:
125rpm
Specifaton
680±50rpm
Weight : 46kg
Dimension
:
607mm(W)
Standard water amount
Standard water
The appearance and
632mm(D)
81L
×
:
consumption
specifications
:
×
966mm(H)
230L(2 Rinses)
may be varied without notice to raise the units
quality.
42
43
Download PDF

advertising