LG | WF-T1022TP | LG WF-T1122TH Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T1022TP(H)
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model
name
and serial number of the set.
Quote this information to your dealer when you require service.
roduct Features
PThe
washing machine does not operate with the lid open. If the lid is
opened during wash, rinse and spin cycles, the machine will stop automatically.
Trubo Drum
Fuzzy Logic Control
A built-in load
sensor automatically detects and
laundry load and a microprocessor optimizes
washing conditions such as ideal water
consumption and washing time.
Advanced
technology
which
System
ensures
Turbo Drum
measures
the
SENSING
START
Laundry Sensor
Water Level Sensor
SETTING
Optimum
Washing
WASHING
Condition
is built into the Electronic Control
the best
washing
result.
washing
3" pulsator rotates in one direction, the Turbo
opposite direction. This creates an even flow
of water in both the upper and lower parts of the drum, resulting
in and an enhanced washing and rinsing action.
While the "Punch
+
Drum rotates in the
3
Step washing
3 step
washing
makes the best
Rubbing and Shaking
Rubbing
Punch
+
washing performance with
3
washing
low
tangling.
Shaking and Disentangling
action
The Punch action's powerful vertical water thrust combined
with the
rotating pulsator movement improves washing
performance and reduces tangles.
3
Spinning mini-pulsators create powerful jets of water which
the laundry up and down in the drum to ensure your
laundry is evenly and thoroughly washed.
move
Strong showering water supply
Strong showering removes detergent
improved rinsing effects.
and naps to
ensure
Lint Filter
Lint and loose threads from
washing cycle
are
laundry generated during the
caught by the lint filters for a cleaner
wash.
Strong spin
By employing
a
strong spin method, laundry
becomes much cleaner.
AUTO
POWER
OFF
Contents
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the
Troubleshooting
section. If you review
chart of
our
Troubleshooting Tips first,
may not need to call for service at all.
Introduction
Before
Starting
Safety
to Wash
information
4
Identification of Parts
5
Function Information
6
Preparation Before Washing
7
Use of Water,
8
Detergent,
Bleach
and Softener
Function of each Button
Washing Programs
Fuzzy
Wash
10
(Normal Wash)
12
Jean Wash, Blanket Wash, Wool Wash
Home
Dry
Economy
Wash
14
Wash
15
Soak Wash
Additional Function
Options
Installation
Care and Maintenance
Delay
start
16
(Reservation)
Wash
17
Option Washing
18
Other useful Functions
20
Placing
and
Connecting
Water
Connecting
Drain Hose
Grounding
21
Leveling
Supply
Method
Hose
22
25
26
Cleaning
27
Troubleshooting
Troubleshooting
29
Specification
Specification
31
you
4
S
information
afety
WARNING!
Read and follow this
safety information carefully.
safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
For your
Introducin
Save these instructions.
?
WATER HEATER
Under certain conditions hydrogen gas may be produced in a water heater that has not been
used for two weeks or more.
Hydrogen gas can be explosive under these circumstances. If the
hot water has not been used for two weeks or more, prevent the possibility of damage or injury
SAFETY
by turning on all hot water faucets and allowing them to run for several minutes. Do this before
using any electrical appliance which is connected to the hot water system. This simple
procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not
smoke or use an open flame or appliance during this process.
?
PROPER
Install or store where it will not be exposed to temperatures below freezing or exposed to the
weather.
INSTALLATION
?
Properly ground washer to conform with all governing codes and ordinances. Follow details in
Installation Instructions.
YOUR
?
LAUNDRY
AREA
?
Keep the area underneath and around your appliances free of combustible materials such as lint,
paper, rags, chemicals, etc.
Close supervision is necessary if this
to
?
WHEN USING
?
THE WASHER
?
?
?
play
on,
appliance is used by or near children. Do not allow children
with, or inside this or any other appliance.
Use this
appliance only for its intended purpose as described in this Owner's Manual.
moving. Wait until the machine has completely stopped
before opening the lid.
Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing
different chemicals can produce a toxic gas which may cause death.
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as wax, oil, paint, gasoline, dry-cleaning solvents,
kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do
not use or place these substances around your washer or dryer during operation.
The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully
Never reach into washer while it is
follow the garment manufacturer's wash and care instructions.
?
To minimize the possibility of electric
shock, unplug this appliance from the power supply or
disconnect the washer at the household distribution panel by removing the fuse or switching off
the circuit breaker before attempting any maintenance or cleaning.
NOTE:
Pressing Power button to turn off does NOT disconnect the appliance
from the power supply.
?
Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,
or has missing or broken parts, including a damaged cord or plug.
?
Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break
WHEN NOT IN
or
USE
?
rupture should occur. Check the condition of the fill hoses; they may need replacement after 5
years.
Before discarding
a
washer, or removing it from service, remove the washer lid to prevent
children from hiding inside.
?
Do not attempt to repair or replace any part of this
appliance unless specifically recommended in
this Owner's Manual, or in published user-repair instructions that you understand and have the
?
skills to carry out.
Do not tamper with controls.
5
Identification
of Parts
Body
Introducin
?Drain hose for
pump
Accessories
Water
supply hoses
Drain hose
or
or
1 Each for cold and
hot water
Note
*
Parts
can
be different
according
to the model.
model*
non
6
F
BeforStaingWsh
unction Information
Our machine
of laundry.
Different
various
provides
washing
methods which suit various conditions and types
types of laundry washing
Fuzzy
(Normal) Wash
Use this
Program for normal clothes except for woolen clothes and lingerie.
automatically detects the quantity of laundry and selects the appropriate
power, washing time, rinsing time and spinning time.
(refer to p12)
The
sensor
level, wash
water
Jean Wash
Thick and
(refer
to
heavy clothes or those which
are
excessively dirty like jeans or working uniforms can be washed.
p12)
Blanket Wash
Blankets of different size
can
be
washed. (refer to
easily
p12)
Wool Wash
Delicate clothes
(lingerie, wool, etc.)
which may be
easily damaged can be washed.
(refer
to
p12)
The fibers of machine washable woolens have been
specifically modified to prevent felting when they are machine washed.
not made of machine washable wool and we recommend that you hand wash them
Most handknitted garments are
Before washing your woolens check the
washing instructions.
washing
washing wool.
Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight. (The heat and
tumble action of a dryer may cause shrinkage or felting of woolen garments.)
Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.) You may wish to
handwash these articles and place them in the machine to spin dry.
?
?
When
woolens
use a
mild
care
label for the
detergent recommended for
?
?
Home
This
Wash (Home Dry Cleaning)
Dry
setting
allows you to wash items marked HAND WASH & DRY CLEARABLE
WASHING & DRY tags.
Washing according
Economy
(refer
to
to the condition of
laundry
wash
moderately
soiled clothes of less than 3.2
kg in a
Other
can
grime.
Delay
be selected to wash
(refer
washing
short time.
(refer
Soak Wash
and
WATER
Wash
Economy wash can be selected to
Soak Wash
or
p14)
to
p16)
(Reservation)
Wash
Delay start (Reservation) Wash is used to delay the finishing time of the operation.
Delayed start washing can be set according to preference.
(refer to p17)
Option
Wash
Spin, Wash, Wash/Rinse,
or
p15)
heavily soiled laundry by soaking in water for some time to remove dirt
method
start
to
Rinse, Rinse/Spin only options
can
selected.
(refer
to
p118)
7
Preparation
Before
Washing
BeforStaingWsh
Care Labels
*
a care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Look for
Sort clothes into loads that can be washed with the
same
wash
cycle, water temperature and spin speed.
Sorting
To get the best
results, different fabrics need to be washed in different ways.
?
SOIL
?
COLOR (Whites, Lights, Darks)
LINT (Lint producers, Collectors)
?
(Heavy, Normal, Light)
Lint Producers
Terry cloth, Chenile, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Lint Collectors
Check before
?
?
?
?
Separate clothes according to the type and amount of soil.
Separate white fabrics from colored fabrics.
Separate lint producers and lint collectors.
Loading
Check all
pockets to make sure that they are empty. Things such as nails, hairclips, matches,
pens, coins, and keys can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
Pretreat any dirt and stains.
sure the clothes are washable in water.
?
Make
?
Check the
WIRE
washing instructions.
Loading
Do not wash fabrics
containing flammable materials (waxes, cleaning fluids, etc.).
Load Size
Adjust the load size accordingly. Loosely load clothes no higher than the
started, press Start button and submerge additional
Close the lid and press Start button again to restart.
The water level should just cover the clothes.
top
row
items.
Light
of holes in the washer tub. To add items after washer has
and
Large-sized clothing
WARNING
Clothes like downs and woollens
large
and float
them in
a
easily.
Use
a
are light weight,
nylon net and wash
small amount of water.
If the
laundry floats during the
wash cycle, it may become damaged.
Use dissolved detergent to prevent the
detergent from clumping.
Long laundry items
nylon nets for long, delicate items.
laundry with long strings
or long length
a net will prevent
tangling during washing.
Fasten zippers, hook, and strings to make sure
Use
For
,
that these items don't snag on other clothes.
※ Nylon net is not supplied by LG.
Fire Hazard
place items in the washer that are
dampened with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Never
8
U
of Water,
se
Bleach and Softener
Detergent,
Using water
BeforStaingWsh
Amount of water
This machine detects the
quantity of laundry automatically,
WATER-DETERGENT
then sets the water level and proper amount of detergent.
When you select a wash program, the water level and amount of
be shown
The
the control
on
following table
Laundry Load
When
SMALL
under7.0
kg
Ex 94l
washing
under5.5
kg
ExL 85l
on
load is under
0.6kg,
consumption.
kg
under4.2
L 80l
automatically detected,
water level is indicated
to decrease water
LARGE
MEDIUM
panel.
over7.1
When the water level is
same
detergent (to
used) will
shows the amount of water.
Water Level /
Amount of Water
the
EX-LARGE
be
the control
kg
under3.2
LM 72l
it may differ
kg
under2.2
M65l
under1.0
kg
MS52l
depending on the quantity
of
kg
S 45l
laundry even though
panel.
the machine
to the
automatically adjusts
minimum water level
(36 liters)
Water temperature
?
The machine sets the
?
You
?
can
change
appropriate temperature automatically according to the wash program
by pressing the WATER TEMP button. (refer to p10)
.
the water temperature
The temperature of the water
impacts the effectiveness of all laundry additives
results. We recommend temperatures of:
White
HOT 49~60°C...(120-140˚F)
-
-
-
?
29~40°C...(85-105˚F)
COLD* 18~24°C...(65-75˚F)
items, diapers, underclothing
and
therefore, the cleaning
heavily soiled, colorfast items.
Most items
Only very bright colors with light soil.
washing in cold water additional steps may be needed:
Adjust detergent amount and pre-dissolve detergent in warm water
Pretreat spots and stains
Soak heavily soiled items
Use appropriate bleach
When
-
-
*
WARM
and
-
-
Temperature below 18°C...(65˚F) will not activate laundry additives and may cause lint, residue, poor cleaning, etc.
In addition, detergent manufactures and care labels define cold water as 26~29°C...(80-85˚F).If the temperature of
the water in the tub is too cold for your hands, the detergent will not activate and clean effectively.
Note
Water current
can
be selected
Using Detergent and
Amount of
by pressing WASH POWER
button
.
(refer
to p
10)
Fabric Softener
detergent
WATER-DETERGENT
When you select a wash program, the water level and the amount of detergent will be shown on
the control panel. The amount of a cup in the diagram is about 40g for concentrated detergent.
For the correct amount of
Available
detergent,
refer to
detergent manufacturer's
instruction
Synthetic detergents that yield
liquid detergent is used,
a
low level of foam
mix it with water
are
(1:1)
recommended.
and pour it into the bleach
dispenser.
Attention
If excessive
detergent is used, the rinse will not
pollution, so use it accordingly.
environmental
be
as
clean and efficient. Also, it could
LARGE
MEDIUM
SMALL
.
Detergent Type
When
EX-LARGE
cause
9
Available Fabric Softener
?
Do not
?
For
more
Depositing Detergent
?
?
Type
concentrated fabric softener. This may cause some problems in automatic
details refer to the softener products instructions for use.
use
dispensing.
and Fabric Softener
Open the detergent dispenser and deposit the
appropriate amount of detergent.
Don't use softener with detergent. Use
Powder
Detergent
& Fabric
Softener) dispenser.
Where you deposit
the softener
softener in last rinse water
?
?
When
using dispenser, dilute softener (30ml)
with fresh water (30ml)
Limit Line
When
Depositing
filling dispenser, do not splash or
softener
don't fill it
above the
limit line.
overfill. It may stain clothes.
?
?
Never pour fabric softener
directly on clothes.
Where you deposit
the detergent
It may stain them
If spotting occurs, wet and rub hand
Fabric
Softener
Cap
dishwashing liquid (or mild bar soap) and
rewash.
Note
Fabric Softener will be inserted
automatically during the
final rinse and the machine
When water pressure is low, the softener may have to be inserted
Using
gives on
alarm sound.
manually.
Bleach
Available Bleach
?Use
oxygenated
Type
bleach.
?Powdered bleach should mixed with water and then be
?For
more
details refer to the
Depositing
products
instruction for
Bleach
deposited into the tub.
use.
Bleach
?Separate the laundry to be bleached and deposit
liquid bleach into the Bleach dispenser.
The dispenser dilutes liquid chlorine bleach before
dispenser
it reaches into your wash load.
Attention
Do not insert bleach
or
fabric softener
directly onto laundry. This may affect colours or damage clothing
or acids such as vinegar and/or rust remover. Mixing can
Do not mix chlorine bleach with ammonia
produce
a
toxic gas which may
cause
death.
BeforStaingWsh
10
BeforStaingWsh
F
Time
unction of each Button
start
left, Delay
(Reservation), Alarm indication
remaining time is indicated, and while paused, the washing time, rinsing time,
spin
example, while washing, "1:09" indicates the time combined remaining for wash,
and
When
indicates a wash time of 15minutes, 2 Rinse times, and 6 minute
rinse,
spin cycles.
paused
time.
spin
Time left
-
During operation,
the
time is indicated. For
and
,
Delay start (Reservation) indication
finishing time. (RES. DELAY)
-
When
Delay
start
program is
(Reservation)
selected, it indicates for the
=
Alarm indication
-
When
an error
occurs,
an error
message appears to indicate the
abnormality. For example,
indicates that the lid is open.
Water temperature button
?
Use to select water
temperature. Pressing the
button allows you to select
warm
(Hot&Cold), Hot,
Cold
respectively.
setting is Cold.
Default
WARM
LEVEL
WATER DETERGENT
-
SOAK
EX-LARGE
HOT
Delay start (Reservation)
?
TRONG
N
ORMAL
G
ENTLE
SMALL
M
DELAY
START
Use to set
a delayed
finishing time.The time
WATER
TEMP.
WATER
LEVEL.
WASH
POWER
WASH
increases when the button is
pushed.
(refer
to
Water level button
17p)
(indication of detergent amount)
adjust the water level as required. The appropriate amount of
detergent is shown next to the water level in the WATERDETERGENT diagram
?Water level is automatically selected for fuzzy normal and jean
?Use to
programs.
The following
Wash power button
?
?
This button allows you to select the
of the water current.
Power
are
indicated
as
LARGE, EX-LARGE
MEDIUM
SMALL, MEDIUM
the button is
as
EX-LARGE
the button is
pushed
SMALL
LARGE
panel may differ according
to different models.
GENTLE
pushed.
This
NORMAL
can
as
be selected
washing jeans,
Strong.
Adjustment can be made while washing.
starts
?
Note
selections light up in
follows NORMAL
for any program, but when
MEDIUM, LARGE
strength
option
sequence
STRONG
settings
LARGE
The control
WASH
LARGE
COLD
MEDUM
button
S
with
it
11
Indicator
?
?
?
?
cycle name is to show the
washing progress.
The light turns on for the
process to be progressed,
flickers during cycle operation,
and it turns off automatically at
the cycle's completion.
The
Use for
selecting wash program.
This button allows you to select 6
different programs for different kinds
?
?
laundry
Program selections light up in sequence
as follows: FUZZY (NORMAL)
BLANKET
ECONOMY
WOOL
HOME DRY
FUZZY
(Power) button
Use to turn the power on or off.
Push again and power goes on or
off.
and dirtiness.
of
?
AUTO OFF
button
Program
Washing progress
?
The power goes off automatically
for about 10 seconds after the wash
is finished.
JEAN
(NORMAL), by pressing
the
button.
Start/ Pause button
?
AUTO OFF
?
AK
WASH
SHOWER
RINSE
SPIN
FUZZY
3
HOME DRY
INLET Er.
DRAIN Er.
DOOR Er.
MTM
?
BLAKET
WOOL
ECONOMY
JEAN
3
Use to start
or
pause the
washing process.
Repeats start and pause by
pushing the button.
The power goes off
automatically 10 minutes after
stopping.
SPIN Er.
START
PAUSE
WASH
PROGRAM
SPIN
RINSE
Child lock function
?
Use to lock
or
Wash. Rinse.
unlock the control buttons to
prevent settings from being changed by
a
child.
?
lock, push wash, rinse buttons
simultaneously and to unlocking push them
one more time during the washing process.
?
:
3 step works at
to
button
rinse, spin time
need to be
?
The time increases when the button is
?
If
To
(refer
Use when wash,
Spin
?
adjusted.
pressed
.
during the wash, press the [start/pause]
button before making any changes.
When the button is pressed during washing, the remaining time
is displayed. (refer to p18, 19)
adjustments
are
needed
p20)
large and medium water level of Fuzzy and Jean course.
BeforStaingWsh
12
W ashing Programs
※ The figure within arrow is processing order
manually.
AUTO OFF
WashingProm
Add
the
Washing
Programs
Fuzzy Washing
(Normal Wash)
Used for normal
Add
the detergent
laundry
1
2
4
loads, this mode
・Add the appropriate
automatically selects the most
quantity of detergent
as indicated by the
appropriate conditions and
completes the sequence in one
operation. The built-in sensor detects
water level next to
the size of the load and the ideal
Or follow the
wash power and wash, rinse and
spin times are set accordingly.
detergent
Jean Wash
WATER-DETERGENT.
manufacturer's
Instructions
1
3
2
5
Use jeans program when
washing
heavy, thick, and extremely dirty
laundry such as jeans and work
・Select the
Jean
outfits.
program on
the Control
panel.
Blanket Wash
1
5
2
3
Blankets of different size can be
easily washed.
・Select the
Blanket
program on
the Control
panel.
Wool Wash
Use this program for washing delicate
fabrics such
lingerie and woolens.
(wash only "water washable" clothes)
Before washing your woolens check
the care label for the washing
1
3
5
2
as
instructions.
(wash only water washable clothes)
・Select the
Wool
program on
the Control
panel.
・Use neutral
detergent
appropriate for the
laundry.
・When washing
woolens use a mild
detergent recommended for washing wool.
13
Close the lid
3
Caution & Note
Finish
6
5
・If water is already in the tub,
or
putting wet laundry into the tub
before starting will increase the water level.
・The pulsator rotates
for 8 seconds to detect
the laundry load.
・Then the water level
・With
・Water will be supplied
for 2 minutes after the
start of the wash to
・When the wash
program ends, the
buzzer will ring for
and the amount of
supplement the water
10 seconds before
detergent to be used
the laundry has
the Power goes off
absorbed.
automatically.
will be shown and
light weight bulky, water level can be set low.
・Changes to water temperature (hot/cold) and wash level
possible during operation.
(refer to p 10)
are
water will be
supplied.
4
6
7
4
6
7
・Before starting to wash, make sure that the laundry is washable.
100% chemical
fiber with the
hand-wash
Possible
100%
Laundry
with the
Impossible
Laundry
?
:
the weight of sheet is
under
5.0kg
tag
Polyester
hand-wash
Weight
tag
electrical blankets
Blanket
Stuffing : Weight about 2kg
(total weight of blanket 3.5kg)
Size : under approx. 2m(width) ×
2.5m(breadth)
?
carpets
・Use a nylon net for washing cashmere blankets to
prevent
them
floating out of the tub.
・Water may splash out when washing light laundry such as a
cashmere blanket or bed sheet with water set at high level.
,
・When
to
4
6
7
setting the water level manually, do not set to
MEDIUM
prevent damage to laundry.
・Washing with hot water may damage the laundry (Water is set
to cold automatically). Ensure that the load is under 2kg.
・To dry woolens lay down them flat on a towel and pat into
shape. Dry woolens out of direct sunlight.(The heat and tumble
action of a dryer may cause shrinkage or felting of woolen
garments.)
・In order to avoid damage to laundry, the spin cycle may appear
slow. This also avoids wrinkles and clothing may still contain
some water.
This is normal.
・Soak Wash cannot be selected for the Wool Wash program.
WashingProm
14
H
WashingProm
ome
dry wash
Home dry is a special wash program for delicate items such as wool
Use this program for clothes that have [Hand Wash and Dry ] or [Water Wash and
For home dry, amount of and laundry must be less than 1.2kg at a time.
.
1
Press the AUTO OFF
2
Press the PROGRAM button to select HOME DRY.
(Power)
button to turn power
on.
Select the HOME DRY program
3
Add the
4
Add the
detergent.
laundry
The
Dry] tags.
on
the Control
panel.
appropriate quantity of detergent marked next to
the
water level of WATER-DETERGENT.
and press the START/PAUSE button.
3 Rinse
cycle will be automatically selected.
detergent to be used
shown and water will be supplied.
The water level and the amount of
will be
5
supplied for 2 minutes after the start of the wash to
supplement the water the laundry has absorbed.
Close the lid.
Water will
Finish
When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
Attention
Use
only
neutral
detergent or the detergent for dry cleaning
Note
Use this program for garments with 'Hand Wash and
'dry Clearable' tags.
Do not wash
'Dry Clean'
only garment.
Unwashable laundries : Silk, Leather garments, Rayon, Easily discolored garments and ties.
Only Cold water is set (water temperature must be below 30 C)
15
Economy
Wash
Use this mode when washing lightly soilded clothes for
The weight should be under 3.0kg.
a
1
Press the POWER button to turn power
2
Press the PROGRAM button to select ECONOMY.
short time.
WashingProm
on.
Select the ECONOMY program on the Control panel.
3
Add the
detergent.
The
appropriate quantity of detergent marked next to the
water level of WATER-DETERGENT.
4
Add the
laundry
and press the START/PAUSE button.
The water level and the amount of detergent to be used will
be shown and water will be
5
Close the lid.
Finish
supplied.
supplied for 2 minutes after the start of the
supplement the the laundry has absorbed.
Water will be
wash to
When the wash program ends the buzzer will ring for
10seconds before the Power goes off automatically.
16
S
WashingProm
oak Wash
washing excessively dirty laundry by soaking in water for some time to
proteins and fats. ‘SOAK’ mode can be used with all washing programs
simultaneously except for WOOL and HOME DRY program.
Use this mode for
remove
1
Press the AUTO OFF
2
Press the PROGRAM button to select the
(Power)
button to turn power
on.
washing program.
The SOAK will not work in WOOL and HOME DRY
cleaning Program.
3
Press the WASH button, to select SOAK program.
Keep pressing the WASH button until
the light turns on‘Soak’and‘Wash’
simultaneously as next image.
SOAK program only works when socking
time is
4
Add the
detergent.
The
40, 60
Add the
laundry
WASH
90 minutes.
appropriate quantity of detergent marked next to
water level of
5
or
SOAK
the
WATER-DETERGENT.
and press the START/PAUSE button.
detergent to be used will
supplied.
The water level and the amount of
be shown and water will be
6
supplied for 2 minutes after the start of the
supplement the absorbed water by the laundry.
Water will be
Close the lid.
wash to
Finish
When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
Note
?
Order of Soak-Wash
timing
Soak-Wash
Lamp
min
?
?
min
min
min
min
min
Select soaking time 40minutes, 60minutes,
the Wash button repeatedly.
min
or
Off
min
90minutes
If necessary, select the times of Rinse and the time for
buttons till you reach the desired times.
min
min
min
(including washing time) by pressing
Spinning by pressing
the Rinse
or
Spin
17
(Reservation) Wash
start
Delay
Delay start (Reservation) Wash is used to delay the finishing time of the
hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time not the start time.
operation.
The
,
1
Press the AUTO OFF
2
Press the PROGRAM button to select the
(Power)
button to turn power
3
Press the DELAY START
washing program.
Select the program for laundry on the Control
This method will not work in Wool Program.
?
(RESERVATION)
The
?
AditonalFucOps
on.
panel.
button.
light will
'
DELAY' turn
on
and 'TIME LEFT'
will be marked.
repeatedly to set the desired finishing time.
example,
washing in 9 hours from now, by
make the number 9:00 pressing the DELAY START
(RESERVATION ) button repeatedly.
Press the button
?
To finish
For
SOAK
(RES.=DELAY)
4
Add the
The
?
detergent.
Add the
laundry
RINSE
SPIN
SOAK
INLET Er.
WASH
SPRAY
RINSE
SPIN
DELAY
INLET Er.
DRAIN Er.
DRAIN Er.
DOOR Er.
DOOR Er.
TIME
LEFT
SPIN Er.
SPIN Er.
appropriate quantity of detergent marked next to
the
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid.
an
and press the START/PAUSE button.
When you press the START/PAUSE button the
blink and the time will be shown.
?
6
SPRAY
TIME
LEFT
water level of WATER-DETERGENT.
?
5
WASH
DELAY
?
Close the lid.
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
Water will be
wash to
Finish
light will
The
washing will be finished according to
the
delayed time.
Note
?
Finishing
time
be
can
delayed
from 3~48hours.
Delaying
from3~12hours
can
be done in 1 hour time
intervals and from 12~48hours in 2 hour time intervals.
?
If the lid is open, the machine will not work, and
an
alarm
signal
will alarm to remind you to close the
lid.
?
To select
washing time, rinsing times, spinning time, water level, hot/cold or wash power manually,
(RESERVATION) button and select the desired option. Then press the
press the DELAY START
START/PAUSE button.
?
When the
laundry cannot be taken out immediately after the wash program ends, it is
spinning program (The laundry will be wrinkled if left for a long time after spinning.)
.
better to omit the
18
AditonalFucOps
0
1
ption Washing
When you
only
need the Wash, Wash/Rinse
or
Rinse
Press the AUTO OFF
2
(Power)
button to turn power
Only Wash
these
can
be set
timing.
(refer
on.
Only Wash,Rinse
Press the WASH button to select the
desired
cycles,
manually.
to
p11)
Press the WASH button to select the
desired timing.
(refer
to
p11)
Press the RINSE button to select the
desired times of rinse.
(refer
to
p11)
can use this option for
wrinkles of laundry
You
3
preventing
Press the WATER LEVEL button, to control the water level according to the
laundry. If you do not choose anything, it is set the middle water
level automatically.
(refer to p10)
amount of
4
Add the
5
Press the START/PAUSE button.
6
Add the
laundry
into the
detergent
washing
tub.
and close the lid.
19
1
Press the AUTO OFF
2
Only
(Power)
button to turn power
on.
Only Rinse,Spin
Rinse
Only Spin/Only drain
Press the RINSE button to
Press the RINSE button to
Press the SPIN button to
select the desired times of
select the desired times of
select the desired times of
rinse.
rinse. (refer
rinse. (refer
(refer
to p
11)
to p
11)
to p
11)
Press the SPIN button to
select the desired times of
rinse. (refer
3
to p
11)
Press the WATER LEVEL button to control the water
level according to the amount of laundry. (refer to p 10)
4
Add the
5
Press the START/PAUSE button.
6
Add the
laundry
into the
detergent
washing
When you want to only
drain, wait until the water in
the washing tub drains
completely.
tub.
and close the lid.
Note
When
a
Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the
water will not be drained off. If you wish to drain the water, press SPIN button and wait until the
water in the tub has drained completely. Then press the START/PAUSE button.
If you do not specify the water level, then Medium will be automatically selected.
If only Rinse is selected, the process will start from Water Supply.
AditonalFucOps
20
O
ther Useful Functions
Child Lock Function
AditonFucOps
If you want to lock all the
use
the child lock
keys to prevent all the setting from being changed by
a
child,
you
can
option.
How to Lock
1
Press the AUTO
OFF(Power)
button.
Turn Power
2
Press the START/PAUSE button to start
washing.
After all
3
on.
washing conditions
Press both the WASH button and the RINSE button
are
set
according to
the manual.
simultaneously.
During the wash program, all the buttons are locked
until washing is completed or it is child- lock
DELAY
function is deactivated
manually.
How to Unlock
If you want to unlock
during wash,
press both the WASH and the RINSE button
simultaneously again.
Note
"
"
Mute
& the
remaining
time
are
alternatively shown
on
the
display while they
are
locked.
Option
If you want to use the washing machine without alarm
buttons simultaneously.
To make buzzer
signal sounds,
work, press both the WASH and SPIN buttons simultaneously
Seeing Remaining
see
the
one more
time.
Time
remaining time for each process, press one of the WASH,
The remaining time for each process will appear for about 1 second.
To
press both the WASH and SPIN
RINSE and SPIN buttons.
21
Placing
1
and
Place the machine
Leveling
on a
flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2cm to the
right side and left sides of the machine for ease of
more
installation.
At the rear,
a
than 10cm
minimum clearance of 10cm is
suggested.
more
than
2cm
more
than 2cm
2
Check that the machine is level
Open
the lid and look from above to
same as
see
Top
view of the machine
if it is
shown. Check that the bubble of the level
indicator is
placed in the center.
Level indicator
3
Leveling
Level indicator
the machine
Lift the front of the
washing machine and twist
the
until the surface bubble is
Adjustable Leg
placed in the center.
Adjustable legs
Level indicator
Caution
If the appliance is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
Instal ion
22
C
Instal ion
onnecting
Connecting
Supply
Hose
Before connecting the Water Supply Hose to the water tap, check the hose type and then
choose the correct instruction here under. Note that the Water Supply Hose supplied may
vary from country to country. Make sure to connect the blue inlet hose to the cold water tap,
and the orange inlet hose to the hot water tap.
Water
Normal
1
Water
Supply
Hose to water
Type
Untighten
the
tap
(Normal tap without thread &
screw
type inlet hose.)
Rubber
screw
packing
Untighten the screw of the connector so that the
tap can be placed in the middle.
2
Fixing
screw
Connector
the connector to the tap
Push the upper connector up till the rubber
Then
packing is in tight contact with the tap.
tighten the 4 screws.
3
Attach the water
to the connector
Push the water
supply
hose connects
supply hose vertically upwards
that the rubber seal within the hose
can
securely
so
Connector
adhere
completely to the tap.
Water
Supply
4
Fixing
the connector to the water
Attach the water
then
5
supply
tighten it by screwing it to
the
supply
connecting the hose, open the tap to check
for any water leakage.
If the connection leaks, close the tap and start
again from step
1
hose
right.
Check the connection of water
After
supply
hose to the connector and
hose and the connector
Hose
23
Normal
1
Type
Separate
(Normal tap without thread & one touch type inlet hose.)
Middle connector from Water
Supply
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose while pressing them.
Hose
Middle
Fixed Sticker
connector
Pressing
Handle
Pressing
Rod
Water
2
Supply
Hose
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so
tap can be placed in the middle.
that the
Rubber
packing
screw
Fixed sticker
Note
In
case
the tap is too
large.
Guide
plate
Rubber
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
packing
plate.
3
Fixing Connectors to
the
Tap
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4
4
screws.
Fixing Upper Connector
and Middle Connector
Remove the fixed sticker in between the
Connector
Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
5
Connecting
Middle
Connector
Fixed sticker
Middle Connector and Water
Supply
pressing rod of the Water Supply
separated from middle
connector(refer to Step1) and then join it to the
Connector
Middle
Connector
Hose
Press down the
Hose which
was
Pressing
rod
middle connector.
Water
6
Check for the water
After
leakage
the
hose, open the tap to check
connecting
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
skip step1, Water leakage may occur.
If you
Supply
Hose
Pressing
handle
Instal ion
24
C
Instal ion
onnecting
Screw
1
Water
Supply Hose
Type
Attach the water
supply
hose to the tap.
Push the water
packing
supply hose up so that the rubber
within the hose can adhere completely to
the tap.
Water
tap
Rubber
Water
2
Connect the water
supply
Packing
Supply
hose to the tap.
Connect the water
tighten it by
supply hose to the tap and then
screwing it to the right.
3
Check water
After
leakage.
connecting the hose,
leakage.
open the tap to check
for any water
Connecting
Water
Supply
Hose to the machine
supply hose to inlet valve of
washing machine, and then lock it by turning
the hose connecting part.
Connect the water
the
Check
to
see
if there is
a
rubber seal inside
Hose connector
the connector.
Rubber seal
Hose
25
Drain Hose
Connecting
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
Pump
Instal ion
Model
1
Fit the machine end of the drain hose to the outlet
2
Put the other end of the drain hose over the
of the drain pump and
tighten the clamp.
standpipe or
wash tub.
Fit the
plastic holder into
Hose
Guide
either holes for the holder at
the rear of the machine.
Within 50mm
The holder is possible to fit at either direction according
to location of the standpipe. Make sure that the holder
keeps firmly the drain hose so that the drain hose should
not fall
down.
0.9~1.2m
Drain Hose
Note
To prevent siphoning, the drain hose should not extend more than 50mm from the end of the hose
The discharge height should be approximately 0.9
1.2 m from the floor.
~
1
None
Pump
Model
Before
connecting
Ensure that the hose
clip is
set
as
indicted here.
Clip
2
Connect the Elbow Hose
Push the elbow hose toward the
body of the
washing machine.
3
Place the Drain Hose
change the direction of the hose, pull out the
change the direction.
Repeat Step2.
To
elbow hose and
guide.
26
G
rounding
Earth wire should be connected.
If the earth wire is not connected, there is
current
CarendMitc
Method
Grounding
possible danger
of electric shock caused
by
leakage.
Method with Ground insert space Terminal
If the AC current outlet has
a ground terminal, then
required. Note that AC
power outlet configurations may differ from country
separate grounding is
to
not
Ground Terminal
country.
Outlet with
Other
Grounding
Method
Burying Copper
Plate
Connect the Ground Wire
Plate and
bury
it
ground terminal.
more
to
a
Ground
Copper
ground.
than 75cm in the
Ground Wire
75cm
Ground
Using
ground Wire to
exclusively for Grounding.
Connect the
Using Short Circuit
Using
a
Copper Plate
Ground Wire
the socket
provided
Ground
Wire
Breaker
Circuit Breaker and If grounding methods
described above
are
not
possible, a separate
employed and installed
Short-circuit
breaker
circuit breaker should be
by a qualified electrician.
Caution
To prevent a possible explosion, do not connect ground to a gas
Do not connect ground to telephone wires or lightning rods.
pipe.
This may be
dangerous during electrical storms..
Connecting ground to plastic has no effect.
Ground wires should be connected when
an
extension cord is used.
the
27
Cleaning
When water supply into the tub is not clean or the filter is clogged with particles(such as
sands...), clean the filter in the inlet valve occasionally.The figure of power cord and water
tap may vary according to the country.
To Clean the Filter in the Inlet Valve
1
Close the tap before
2
turning
Turn off the power
pulling out the
off the power.
Select both hot/cold and then
press the
button to
cord.
[START/PAUSE]
remove
the machine
3
before
water from
completely.
4
After
removing the water
supply hose pull out the filter.
Then
use a
Replace the filter
after cleaning it.
brush to clean
the filter.
Caution
?
Before
cleaning the filter, the impurities in the water supply hose should be removed.
To Clean the Lint Filter
1
2
Pull out the lint filter from
3
Turn the net inside out
the tub in the direction
to clean the filter and
shown below.
rinse it with water.
Replace- the filter to the
original location. Push the
lip of the filter until a pop
sound is heard.
Note
If the lint filter is torn
To Clean the
1
damaged, purchase
a new one
from LG service center.
Pump casing (for pump model)
Unfasten 4
back
or
screws
of the
cover.
2
Turn the cap as shown in
diagram and unfasten it.
3
fasten it.
Remove
such
as
Reassemble the cap to
the arrow direction and
foreign objects
pin, button, coin,
etc
(Bottom view)
(Bottom view)
Self-cleaning function(for pump model)
In the initial stage of every washing machine process, the drain pump works for 3~5seconds to pump out
water with dirt from the washing tub. It helps to keep the wash tub clean and improve pumping ability.
Caution
?
Check if water leaks after
reassembling. (The
Rubber
ring
is in the
cap)
CarendMitc
28
C leaning
IF FROZEN
CarendMitc
1
Remove the water
supply hose,
and immerse
Connect the water
3
supply hose to
Pour approx. 2 liters of hot water at approx. 40
into the bowl and let it stand for 10 minutes.
2
it in hot water at approx. 40 ˚C.
the water tap and confirm that the
washing machine performs
the
˚C,
supply
and
drainage of water.
WHEN THERE IS A FEAR OF FREEZING
1
3
Close the water taps and
Water
Supply
remove
the
Remove the water which remains in the water
2
Hose.
Lower the drain hose and drain the water in the bowl and the drain hose
Wash Inner-tub
Leave the lid open after
by spinning.
to allow moisture to
washing
evaporate. If you
to clean the inner-tub use a clean soft cloth
then rinse.
Inlet Hoses
not use harsh or
dampened
gritty cleaners.)
with
want
liquid detergent,
Hoses
connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface
with sharp objects.
Exterior
Long
(Do
supply.
Vacations
Be
sure
water
supply
weather will be below
is shut off at faucets. Drain all water from hoses if
freezing.
SCRUD
Scrud is the
softener
given to the waxy build-up that can occur within any washer when the fabric
into contact with detergent. This build-up is not brought about by a fault in the
name
comes
machine. If scrud is allowed to
unpleasant smell
If you wish to
?
?
?
?
?
build-up
in the machine it
can
result in stains on your clothes or
use
fabric softener
we
recommend:
Using fabric the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle has finished.
Clean your machine regularly
Cold water washing increases the chance of this build-up occurring. We recommend a warm or hot wash at
regular intervals e.g. approx. every 5th wash.
fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a buildup.
CLEANING THE INSIDE OF YOUR WASHER
If you
use
fabric softener
occasionally
?
?
an
in your washer.
or
do
regular
cold water
Fill your machine with hot water. Add about two cups of
Let it rotate for several minutes.
Stop
?
After
the
?
washing,
it is
important
a
powder detergent that contains phosphate.
open the lid, and leave it to soak overnight.
drain the machine and run the machine through
machine,
soaking,
that you
clean the inside of your machine.
We do not recommend that you wash clothes
during
this
regular cycle.
procedure.
a
29
Troubleshooting
Look for your problem below, then check the things we suggest. More often than not,
this will give you the answer to your problem. And you'll be able to carry on without
having to telephone your service center.
WASH PROBLEM
Problem
Lint or residue
clothes
Possible Causes
Incorrect
sorting
Washing
too
What To Do
?
Separate
lint
from lint collectors.
producers
on
long
?
Wash small loads for
a
shorter time than
larger
loads.
Detergent
on
clothes
Detergent not
dissolving
?
Try using less detergent
?
Use
?
Try liquid detergent.
Try pre-dissolving the detergent
?
Black spots
clothes
on
Incorrect use of
fabric softener
Dye transfer
Fabric
damage
Snags, holes,
tears, rips or
excessive
wear
Pins, snaps, hooks,
sharp buttons, belt
buckles, zippers,
and sharp objects
left in pockets
Undiluted chlorine
bleach
?
?
?
warmer
When
filling dispenser, do not splash or overfill.
directly on clothes.
Never pour fabric softener
Pre-treat stain and rewash.
laundry
dirty
out
or lightly colored items from dark colors.
dry non-colorfast clothes separately
Sort whites
?
Wash and
?
Fasten snaps, hooks, buttons, and zippers.
Remove any loose brassiere wires.
?
objects in pockets and sharp buttons.
(which snag easily) inside out.
?
Remove
?
Turn knits
?
Check bleach
package instructions for proper
amount.
Never add undiluted bleach to wash
clothes to
comes
temperature.
?
?
The
water
a
come
or
allow
in contact with undiluted bleach.
Water temperature
is too cold.
Use
Stain is not pretreated
detergent dissolved in water onto stains
help shift dirt.
Wash stains as soon as possible. The longer they are
left the harder they are to remove.
Washer is
overloaded
Did you load too much into the machine?
Incorrect
White clothes
sorting
warmer
Brush
a
water
temperature
little
like collars and cuffs to
are
better washed
Separate light and heavily
separately.
soiled items.
Troubleshting
30
T roubleshooting
Before
Troubleshting
calling
Symptom
Water
Supply
Failure
for service check the
Error
problem against
Message
INLET Er.
the list belows.
Check up
.
.
.
.
Is the water tap shut off?
Is the water supply cut off ?
Is the tap
water
supply hose frozen
Is the water pressure low
valve
.
or
or
?
(refer
to
p28)
is the filter of the inlet
clogged with impurities?
(refer
to
p27)
Is Hot/Cold selected to Hot when the hose connected is
Cold?
.
Drainage
Failure
DRAIN Er.
Is the Cold hose connected to Hot?
.
Is the drain hose
.
Is the drain hose bent
.
Is the internal part of the hose
positioned correctly?
or placed too high?
or
drain pump
(only pump model) clogged with impurities?
.
Spin
Failure
Check if electric power has gone off.
.
Is the
laundry evenly balanced?
.
Is the
washing machine placed on
SPIN Er.
(refer
Door(Lid) Open
Internal
failure
sensing
Power failure
Overflow failure
DOOR Er.
.
.
to
(refer
a
to
p21)
flat surface?
p21)
Is the lid closed?
Please call your nearest LG Electronics Service Center
for help.
31
Specification
Specifaton
1007mm
925mm
625mm
625mm
Model
WF-T1022TP(H)
Weight
47
Size
625(W)x625(D)x1007(H)
Standard
water level
Water tab pressure
kg
94L
30 -800 kPa
(0.3
-8
kgf /cm2)
P/No.: 3828EA3007Y
Download PDF