LG | WF-TS1088TH | LG WF-TS1088TH Owner’s Manual

P/No.: 3828EA3024K
Washing
Machine
OWNER'S MANUAL
MODEL
:
WFT85C30(1)D(E,F)C(H,P,D,E,F,M)
WFT10C30(1)D(E,F)C(H,P,D,E,F,M)
WF-TS1088TH
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Record model
name
and serial number of the set.
Quote this information to your dealer when you
require
service.
P
roduct Features
Washer doesn't operate while the lid is open. If the lid is open
rinse or spin cycles, the operation stops for safety.
during
the wash,
sensors
The
automatically detects the quantity of a Detergent put by a user and
temperature and the quality of water to make the best washing algorithm for
washing and rinsing, which can give the best washing effect.
sensor
FUZZY
the
logic control
A built-in load
sensor automatically detects the laundry load and a
microprocessor optimizes washing conditions such as ideal WATER
and washing time.
SENSING
START
Advanced
ensures
AUTO
POWER
OFF
SETTING
Laundry Sensor
WASHING
Optimum
Washing
Water Level Sensor
Condition
technology
LEVEL
is built into the Electronic Control
System
which
the best washing result.
Turbo drum
When "Punch
washing (option)
washing wings turn, the washing
opposite direction. This makes the both
sides current of water which improve washperformance by rubbing clothes strongly.
+
3"
tub turns in the
Applied
3
models
:
WFT
Step washing
3 step
washing
makes the best
Rubbing and
Shaking
Rubbing
ATTENTION
washing performance with
Be
sure
low
tangling.
Shaking and
Disentangling
to remove the unit from the carton
base,
otherwise the machine will not be able to operate
properly.
Contents
READ THIS MANUAL
Inside you will find many helpful hints on how to
properly. Just a little preventive care on your part
use
and maintain your washer
you a great deal of time and
can save
money over the life of your washer. You will find many answers to common problems
in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you
may not need to call for service at all.
Introduction
Before
Starting
Safety
to Wash
Information
Identification of Parts
5
Function Information
6
Preparation Before Washing
7
Use of Water,
8
Special
Washing Programs
4
Detergent,
Bleach and Softener
Guide for Stain Removal
11
Function of each Button
12
FUZZY Wash
14
(Normal Wash)
ECONOMY Wash
14
JEAN Wash
14
WOOL Wash
14
DELICATE
14
SPEEDY SOAK Wash
16
FAVORITE Wash
17
SILENT
18
Additional Function
TUB CLEAN
19
Program
DELAY START (RESERVATION) Wash
20
Option Washing
21
Other Useful Functions
22
Installation
Care and Maintenance
Troubleshooting
Terms of
Warranty
Specification
Placing
and
Connecting
Water
Connecting
Drain Hose
Grounding
23
Leveling
Supply
Hose
Method
24
27
28
Cleaning
and Maintenance
29
Common
washing problems
31
Troubleshooting
32
Terms of
33
Warranty
Specification
34
4
S
afety
Information
WARNING!
Read and follow this
safety information carefully.
safety, the information in this manual must be followed to minimize the
shock, or to prevent property damage, personal injury, or loss of life.
For your
Introducin
risk of fire
or
explosion, electric
Save these instructions.
?
WATER HEATER
Under certain conditions hydrogen gas may be produced in a water heater that has not been
used for two weeks
SAFETY
or more.
Hydrogen gas can be explosive under these circumstances. If the
HOT water has not been used for two weeks or more, prevent the possibility of damage or
injury by turning on all HOT water faucets and allowing them to run for several minutes. Do
this before using any electrical appliance which is connected to the HOT water system. This
simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do
not smoke or use an open flame or appliance during this process.
PROPER
?
The base opening must not be obstructed by carpeting when the washing machine is installed on
?
Install or store where it will not be exposed to temperatures below
INSTALLATION
a
carpeted floor.
freezing or exposed to the
weather.
?
Properly ground washer to conform with all governing codes and ordinances. Follow details in
?
Must be positioned
Installation Instructions.
YOUR
?
LAUNDRY
AREA
?
THE WASHER
?
?
?
?
?
that the plug is accessible.
Keep the area underneath and around your appliances free of combustible materials such as lint,
paper, rags, chemicals, etc.
Close supervision is necessary if this
to
WHEN USING
so
play on,
appliance is used by or near children. Do not allow children
with, or inside this or any other appliance.
Use this
appliance only for its intended purpose as described in this Owner's Manual.
Never reach into washer while it is moving. Wait until the machine has completely stopped
before opening the lid.
Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing
different chemicals can produce a toxic gas which may cause death.
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as wax, oil, paint, gasoline, dry-cleaning solvents,
kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do
not use or place these substances around your washer or dryer during operation.
The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully
follow the garment manufacturer's wash and care instructions.
?
To minimize the possibility of electric
shock, unplug this appliance from the power supply or
disconnect the washer at the household distribution panel by removing the fuse or switching off
the circuit breaker before attempting any maintenance or cleaning.
NOTE:
Pressing Power button to turn off does NOT disconnect the appliance
from the power supply.
?
Never attempt to operate this
or
WHEN NOT IN
?
Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break
or
USE
?
appliance if it is damaged, malfunctioning, partially disassembled,
has missing or broken parts, including a damaged cord or plug.
rupture should occur. Check the condition of the fill hoses; they may need replacement after 5
years.
Before discarding
a
washer, or removing it from service, remove the washer lid to prevent
children from hiding inside.
?
?
Do not attempt to repair or replace any part of this appliance unless specifically recommended in
this Owner's Manual, or in published user-repair instructions that you understand and have the
skills to carry out.
Do not tamper with controls.
5
Identification
of Parts
Body
POWDER DETERGENT
AND SOFTNER BOX
WATER SUPPLY
HOSE
Make
sure
the water
does not leak.
POWER PLUG
If the
supply cord is
damaged, it must be
replaced by the
BLEACH
DISPENSER
manufacturer
or
its service agents
or
similarly qualified
person in order to
avoid a hazard.
FUNCTION SELECTOR
TUB
LINT FILTER
Clean
Use to start
or
regularly
linting
START/PAUSE
BUTTON
on
to
stop
the clothes
load.
stop the
washing machine
temporarily.
DRAIN HOSE
for pump model
Check if the drain hose
is
hung up before
operating the
washing machine.
DRAIN HOSE
for non pump model
ADJUSTABLE LEGS
Use to level the
washing
machine for correct balance
&
spin operation.
BASE
Accessories
Water
supply
hoses
Drain hose
or
or
1 Each for COLD and
HOT water
Note
Part
can
be different
according to the model.
Introducin
6
F
unction Information
Different
Our machine provides various washing methods which suits various conditions and
types of laundry.
types of laundry washing
FUZZY(Normal)
Use this
Wash
Program for everyday washing e.g. sheets, towels,
T-shirts.
(refer to page 14)
JEAN Wash
Use this Program for heavily soiled durable garments e.g. overalls, jeans.
Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms
can
be washed.
(refer to page 14)
DELICATE Wash
Use this program to wash DELICATE and washable laundries.
(refer to page 14)
WOOL Wash
Delicate clothes
(lingerie, wool, etc.) which may be easily damaged can be washed. (refer to page 14)
The fibers of machine washable woolens have been specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
Before washing your woolens check the care label for the washing instructions.
When washing woolens use a mild Detergent recommended for washing wool.
Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
(The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.)
Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.)
You may wish to handwash these articles and place them in the machine to spin dry.
?
?
?
?
FAVORITE Wash
This
setting allows you to store your FAVORITE wash conditions in the normal cycle memory. (refer to page 17)
SILENT Wash
Use this program to wash quietly at night.
Washing according
(refer to page 18)
to the condition of
laundry
ECONOMY Wash
ECONOMY wash
can
be selected to wash
lightly soiled clothes of less than 2.0 kg in a short time. (refer to page 14)
SPEEDY SOAK Wash
SPEEDY SOAK Wash is designed to maximize washing performance and
soiled laundry with FUZZY or JEAN Program. (refer to page 16)
Other
washing
can
be selected to wash
heavily
method
TUB CLEAN
Use this program to clean the inside of washing machine
especially Inner tub
& Outer tub
.
(refer to page 19)
DELAY START Wash
DELAY START Wash is used to delay the finishing time of the operation.
The number of hours to be delayed can be set by the user accordingly. (refer to page
20)
OPTION WASH
When the
user
needs
only SPIN, RINSE/SPIN, RINSE, WASH/RINSE, WASH, WASH/RINSE/SPIN,
(refer to page 21)
SPEEDY SOAK/WASH/RINSE/SPIN.
WASH OPTION
One
or more
WASH OPTIONS
can
be selected for FUZZY and JEAN
washing program. (refer to page 22)
7
Preparation
Before Washing
BeforStaingWsh
Care Labels
*
a care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Look for
Sort clothes into loads that
can
be washed with the
same
wash
cycle, Water Temperature and spin speed.
Sorting
To get the best
results, different fabrics need to be washed in different ways.
?
SOIL
?
COLOR (Whites, Lights, Darks)
LINT (Lint producers, Collectors)
?
(Heavy, Normal, Light)
Lint Producers
Terry cloth, Chenille, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Lint Collectors
Check before
?
?
Check all
Separate clothes according to the type and amount of soil.
Separate white fabrics from colored fabrics.
Separate lint producers and lint collectors.
Loading
pockets to make sure that they are empty. Things
?
Remove belts,
?
Pretreat any dirt and stains.
Make sure the clothes are washable in water.
?
?
?
underwires,
nails, hairclips, matches,
etc. to
prevent damage
to the
machine
or
larger during washing.
your clothes.
WIRE
washing instructions.
Remove tissue in pockets.
on
stains
or
heavy
soil
Pretreat shirt collars and cuffs with
Before
?
as
Check the
Pretreatment
?
such
pens, coins, and keys can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become
Use
a
a pre-wash product or liquid Detergent when placing them in the washer.
washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.
pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The
longer they are left the harder they
are
to remove.
(For more detail refer to page11)
Loading
Do not wash fabrics
WARNING
containing flammable materials (waxes, cleaning fluids, etc.).
Fire Hazard
Load Size
The WATER LEVEL should just
cover
the clothes.
Adjust the load size
accordingly. Loosely load clothes no higher than the top row of holes in the
washer tub. To add items after washer has started, press Start button and
submerge additional items. Close the lid and press Start button again to restart.
Light
and
Large-sized clothing
Clothes like downs and woollens
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer
can completely remove oil.
dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Do not
light weight, large and float easily. Use a nylon net and
laundry floats during the wash cycle, it may
become damaged. Use dissolved Detergent to prevent the Detergent from clumping.
wash them in
a
are
small amount of water. If the
Long laundry items
nylon nets for long, DELICATE items. For laundry with long strings or long length a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Use
,
8
U
BeforStaingWsh
Using
of Water,
se
Detergent,
Bleach and Softener
Water
Amount of WATER LEVEL
?
?
This machine detects the
quantity of laundry automatically,
(to
be
used) will be shown on
?
The
?
When the WATER LEVEL is
following table
though
even
?
the
The amount of
Water
a
the control
panel.
shows the amount of water.
same
automatically detected,
WATER LEVEL is indicated
cup in the
diagram is
about
it may differ depending
the control panel.
on
the
quantity of laundry
on
40g for concentrated Detergent.
Temperature
?
The machine sets the
?
You
?
then sets the WATER
LEVEL and proper amount of Detergent.
When you select a wash program, the WATER LEVEL and amount of Detergent
appropriate temperature automatically according to the wash program
change
Temperature by pressing the WATER TEMP. button. (refer to page 12)
The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning results.
.
the Water
can
We recommend temperatures of:
-
-
-
?
White
Most items
49~60°C...(120-140˚F)
29~40°C...(85-105˚F)
COLD* 18~24°C...(65-75˚F)
items, diapers, underclothing
and
heavily soiled,
colorfast items.
Only very bright colors with light soil.
washing in COLD water additional steps may be needed:
Adjust Detergent amount and pre-dissolve Detergent in WARM water
When
-
-
-
-
*
HOT
WARM
Pretreat spots and stains
Speedy Soak heavily soiled items
appropriate bleach
Use
Temperature below 18°C...(65˚F) will not activate laundry additives and may cause lint, residue, poor cleaning,
In addition, Detergent manufactures and care labels define COLD water as 26~29°C...(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the Detergent will not activate and clean
effectively.
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be
necessary for
severe cases.
Using Detergent
Detergent
Follow the
Use
more
Detergent package directions. Using too little Detergent is a common cause of laundry problems.
Detergent if you have hard water, large loads, greasy or oily soils or lower Water Temperature.
Choosing
the
right Detergent
We recommend the
use
of domestic
Detergent, (powder, liquid or concentrated). Soap flakes or
washing woolens
granulated soap powders should not be used in your washing machine. When
remember to use Detergent suitable for washing woolens.
etc.
9
Using Detergent
How much
Detergent
When you select a wash program the WATER LEVEL and the amount of Detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated Detergent.
The correct amount of Detergent will vary depending on the amount of soil in your clothes
cloches may need more Detergent, while bath towels usually need less.).
For
(Jeans
and work
liquid and concentrated Detergents, follow the recommendations of the Detergent manufacturer.
Note: To check you are using the correct amount of Detergent, lift the lid of your machine about halfway through the wash. There should be a thin layer of foam over the surface of the water. Lots of
foam may look good, but it does not contribute to cleaning your clothes. No foam means not enough
Detergent has been used; soil and lint can settle back on the clothes or the washing machine.
If excess
Detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental
Adding
the
pollution, so use it accordingly.
Detergent
Powder Detergent / Fabric Softener dispenser.
Open the Detergent dispenser and deposit the appropriate
amount of Detergent
Where you
where you deposit the Detergent
deposit the
Powder Detergent dispenser.
detergent
Some Detergents MUST be fully dissolved before
adding to your machine to get the best wash results.
Check the instructions on the Detergent packet.
If you use powdered Detergent it is essential that the required amount be fully dissolved in very HOT water
before being added to WARM or HOT water for the actual wash.
Pre-dissolving Detergent in WARM water when washing in COLD water can improve its performance.
Using Liquid
?
?
?
?
Bleach
clothing care label for special instructions and separate the
laundry to be bleached
Dilute liquid chlorine bleach.
Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
Check
Never pour undiluted
Bleach
dispenser
clothes
or
into the wash basket.
This may cause change of color or damage the laundry.
Do not mix chlorine bleach with ammonia or acids such
as
vinegar and/or rust remover. Mixing can reduce
liquid bleach directly onto
toxic gas which may cause death.
Do not pour powdered bleach into bleach
a
dispenser.
10
U
BeforStaingWsh
Using
se
of Water,
Bleach and Softener
Detergent,
Fabric Softener
Available Fabric Softener
?
Do not
?
For
use
more
concentrated fabric softener. This may cause some problems in automatic
products instructions for use.
Fabric Softener
Don't
softener with
use
detergent.
Use
Powder
softener in last rinse water
?
When
?
When
using dispenser,
(30ml) with fresh
?
?
dispensing.
details refer to the softener
Depositing
?
Type
Fabric Softener
(30ml)
do not
dispenser.
Where you deposit
the softener
dilute softener
water
filling dispenser,
Detergent /
splash or
overfill. It may stain clothes.
Never pour fabric softener directly
clothes. It may stain them
Limit Line
on
Depositing
spotting occurs, wet and rub with hand
dishwashing liquid (or mild bar soap) and
If
If the
filled,
is
softener
it can overflow.
over
Fabr ic
Softener
softener
don't fill it
above the
limit line.
Cap
rewash.
NOTE
Fabric Softener will be inserted
automatically during
the final rinse and the machine
When water pressure is low, the softener may have to be inserted
Scrud(Waxy
Build
gives
on
alarm sound.
manually.
up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with Detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it
smell in your washer.
If you wish to
?
?
?
?
?
?
use
fabric softener
we
can
result in stains
on
your clothes
or an
unpleasant
recommend
Using fabric softener sparingly.
filling the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle is finished.
Clean your machine regularly. (refer to page 19 or 30)
Cold water washing increases the chance of this build-up occurring.
When
HOT wash e.g. every 5th wash should be at least a
Fabric softener of thinner consistency is less likely
build-up.
We recommend
a
regular WARM or
warm one.
to
leave residue
on
the
dispenser and contribute to
a
11
Guide for Stain Removal
Special
WARNING
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
?
?
?
?
?
?
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of children's reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
For successful stain removal:
?
Remove stains
?
Determine the kind of
promptly.
stain,
then follow the recommended treatment in the stain
removal chart below.
To pretreat
?
stains,
use a
granular Detergent
prewash product, liquid Detergent,
unknown stains because HOT water
?
Use COLD water
?
Check
?
Check for colorfastness
?
Rinse and wash items after stain removal.
care
or a
paste made from
and water.
on
label instructions for treatments to avoid
can
set
stains.
fabrics.
specific
by testing stain remover on an inside seam.
on
Follow fabric
care
label
instructions
Stain Removal
STAIN
Adhesive tape,
rubber cement
chewing gum,
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
TREATMENT
Apply ice. Scrape off excess. Place stain face down on paper towels.
nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using COLD water and bleach safe for fabric.
Saturate with prewash stain
Rinse with COLD water. Rub with bar soap. Or pretreat
bleach safe for fabric.
product containing enzymes. Wash using
or
soak with
remover or
Dye transfer on white fabric
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Grass
Pretreat
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
motor oils)
or
soak in WARM water using
product containing enzymes. Wash using bleach safe for fabric.
Ink
Some inks may be impossible to remove. Washing may set
alcohol or nonflammable dry cleaning fluid.
Mildew, scorch
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before
mildewed fabrics may be permanently damaged.
Mud
Brush off dry mud. Pretreat
Mustard, tomato
Nail polish
Paint, varnish
Rust, brown or yellow
discoloration
Shoe polish
some
inks. Use
prewash stain remover, denatured
washing. Badly
or soak with product containing enzymes.
prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
Pretreat with
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
Detergent and
: Pretreat with a paste of granular Detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash using bleach
LIQUID
safe for fabric.
BeforStaingWsh
12
F
BeforStaingWsh
unction of each Button
WATER TEMPERATURE BUTTON
Use to select Water
HOT
Default
WARM
COLD
WATER LEVEL BUTTON
(INDICATION OF DETERGENT AMOUNT)
Temperature.
Pressing the button allows you to
COLD
(OPTION)
select
?
(HOT&COLD)
Use to adjust the WATER LEVEL as required. The appropriate amount of
Detergent is shown next to the WATER LEVEL in the WATERDETERGENT diagram
respectively.
setting is COLD.
?
WATER LEVEL is automatically selected for FUZZY (normal) program.
The following settings
LARGE
are
.
SMALL MEDIUM
WASH OPTION BUTTON(OPTION)
?
According to kinds of
laundry, soiled extent or
washing habit you can
The time increases when the button
a
is
OPTION manually.
pushed.
following settings are indicated
as the button is pushed 3
4
5
By pressing the button
...11
select suitable WASH
?
delayed finishing time.
Use to set
?
?
WASH OPTION is
changed.
The
12
14
16
...46
48
3 HOUR.
?
To cancel
?
?
EX-LARGE
SMALL
MEDIUM LARGE
LARGE
It only operates in FUZZY Program.
During being detected by the sensor, the LED flashes green, orange
and red in turn. And, after detecting, the LED lights a specific color
according to the detecting condition as follows:
If the current washing condition (Detergent quantity, Water
Temperature, water quality, etc.) is determined as better than the
standard one, it optimizes the algorithm to save the energy by
decreasing washing time/strength, and the LED automatically turns
delay time, turn the power
switch off.
(refer to page 22)
MEDIUM
WASHING CONDITION INDICATOR
DELAY START (RESERVATION) BUTTON
?
indicated as the button is pushed
LARGE EX-LARGE
(refer to page 20)
to red.
If the current washing condition is determined as worse than the
standard one, it optimizes the algorithm by increasing washing
time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard
one, the algorithm has no change and the LED turns to green.
Note
*
For
*
*
*
the washing algorithm, the displaying time may be
maximum and decreased by 4 minutes at maximum.
optimizing
8minutes
at
changed during washing-increased by
Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
If the
*
Because
*
TUB CL
Even if
the sens
*
The
con
13
TIME
LEFT,
DELAY START
START/ PAUSE BUTTON
(RESERVATION), ALARM INDICATION
?
?
?
Time left
-
During operation,
the
remaining time is indicated.
DELAY START INDICATION
(RESERVATION) When
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
-
?
DELAY START
?
Alarm indication -When
appears to
indicate the
an error
occurs,
abnormality.
For
an error
example,
Use to start
or
pause the
washing process.
Repeats start and pause by
pushing the button.
message
indicates
that the lid is open.
AUTO OFF
(POWER) BUTTON
?
Use to turn the power
off.
?
Push
again
on or
off
?
on or
and power goes
The power goes off
automatically about 10
seconds after the wash is
finished.
CHILD LOCK FUNCTION
PROCESS BUTTON
?
Use to select
SPEEDY SOAK,
Wash, Rinse and Spin
functions
as
desired.
?
Use to lock
or
unlock the control
buttons to prevent
settings from
being changed by a child.
To lock, push the PROCESS
PROGRAM BUTTON
?
?
and
PROGRAM buttons
?
simultaneously and to unlock
push them one more time during
the washing process.
(refer to page 22)
Use for
selecting wash program.
This button allows you to select 8
different programs for different kinds of
laundry and dirtiness.
program selections light up in sequence as
follows: FUZZY (NORMAL)
DELICATE
WOOL
TUB CLEAN
etc.
ECONOMY
SILENT
JEAN
FAVORITE
FUZZY
(NORMAL)
Select the desired program by
pressing the button.
*
*
detecting ability of the sensor may be decreased by using it for a long time, periodically use
TUB CLEAN course to clean the tub. (refer to page 19)
Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program,
Because the
the
*
sensor
will still work. The sensor algorithm may differ according
panel may differ according to different models.
The control
to models.
BeforStaingWsh
14
Washing Programs
WashingProm
Add
the
Washing
Programs
FUZZY Wash
Add
the
laundry
1
Detergent
2
4
(Normal Wash)
Used for normal loads, this
mode automatically selects the
most appropriate conditions
and completes the sequence
in one operation. The built-in
sensor detects the size of the
load and the ideal wash
power and wash, rinse and
spin times are set accordingly.
Add the appropriate
quantity of Detergent as
indicated by the WATER
LEVEL next to
WATER DETERGENT.
Or follow the Detergent
manufacturer's instructions
1
3
ECONOMY Wash
Use this mode when
Select the
ECONOMY
washing
program
the
Control
lightly soiled clothes for a short
highly recommended
laundry amount is under 2.0kg.
on
time. The
panel.
1
3
5
2
Add the
appropriate
quantity of Detergent as
indicated by the WATER
LEVEL next to
WATER DETERGENT.
Or follow the Detergent
manufacturer's
instructions
5
2
JEAN Wash
Use Jean program when
Jeans of different sizes
Spread
jean
evenly in
the
washing
the tub
1
3
Select the
JEAN program
on the
Control panel.
5
2
WOOL Wash
Use this program for washing delicate
fabrics such as lingerie and woolens.
Select the
WOOL
(wash only "water washable" clothes)
Before washing your woolens check
the care label for the washing
program on
the Control
panel.
(wash only water washable clothes)
DELICATE
action.
This would include
nylons and dress
light soiled.
blouses,
shirts with
Detergent
appropriate for the
laundry.
When washing
woolens use a
mild Detergent
recommend- ed
for washing wool.
instructions.
Use this program to wash items
requiring a GENTLE WASH
Use neutral
1
3
2
h Select the
DELICATE
program on
the Control
panel.
5
15
Close the lid
4
3
5
Caution & Note
Finish
6
If water is
wet
already in the tub, or putting
laundry into the tub before starting
will increase the WATER LEVEL.
The pulsator rotates for
8 seconds to detect the
laundry load.
Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.
Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.
When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.
5
4
6
7
5
4
6
7
5
4
6
7
With
lightweight bulky loads,
LEVEL
can
WATER
be set low.
Changes to Water Temperature
(HOT/COLD) and wash level are
possible during operation.
(refer to page 12)
When
setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
Washing with HOT water may damage
the laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg.
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain
normal.
some
water. This is
If WOOL wash is selected, GENTLE SPIN
will be set
5
4
6
7
h Before
automatically.
starting to wash, make sure that
laundry is washable.
Washing with HOT water may damage
the laundry (Water is set to COLD
automatically).
the
WashingProm
16
S
WashingProm
PEEDY SOAK Wash
Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty.
SPEEDY SOAK mode can be used with FUZZY or JEAN or SILENT or FAVORITE program.
1
Press the AUTO OFF
2
Press the PROGRAM button to select the
(POWER)
button to turn power
on.
washing program.
SPEEDY SOAK will
not
work in WOOL and
ECONOMY, DELICATE, TUB CLEAN Program.
3
Keep pressing the PROCESS button until the SPEEDY SOAK
light is on and then Wash, Rinse, Spin lights are on
simultaneously.
Until the washing process is completed, the SPEEDY SOAK
light is on.
4
Add the
Detergent.
The
appropriate quantity of Detergent marked next to
the
WATER LEVEL of WATER-DETERGENT.
5
Add the
laundry
and press the START/PAUSE button.
The WATER LEVEL and the amount of
used will be shown and water will be
6
Close the lid.
supplied for 2 minutes after the start of the
supplement the absorbed water by the laundry.
Water will be
wash to
Finish
Detergent to be
supplied.
When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
17
FAVORITE
Wash
Pressing the FAVORITE button allows you to store your FAVORITE
cycle memory and then recall it for use at a later time.
wash conditions in the
normal
1
Press the AUTO OFF
2
Select the FAVORITE program.
3
Select your FAVORITE wash conditions.
(POWER)
button to turn power
?
WashingProm
on.
Press the WATER TEMP. button to select wash Water
Temperature.
?
Press the WATER LEVEL button to select
WATER LEVEL.
?
Press the WASH OPTION to select WASH OPTION.
?
Press the PROCESS button to select
RINSE, SPIN) respectively
4
PROCESS(WASH,
you want to store.
Press the START/PAUSE button to store & start your FAVORITE wash
Power turns off automatically after wash.
Note
To recall your FAVORITE
1. Press POWER on.
2. Select the FAVORITE
cycle.
cycle by pressing the PROGRAM.
3. Press the START/PAUSE button. Then the wash cycle starts.
cycle.
18
S
WashingProm
ILENT Wash
Use this program to wash
quietly
in SILENT
especially during
late
button to turn power
on.
1
Press the AUTO OFF
2
Press the PROGRAM button to select SILENT program.
3
Add the
4
Press the START/PAUSE button.
5
Add the
laundry
(POWER)
into the
Detergent
washing
night
and dawn.
tub.
and close the lid.
Note
?
?
SILENT program takes
To reduce noise in
more
longer washing
spinning, spin rpm is
moisture than normal.
time than FUZZY
(Normal)
lower than normal
program.
spinning rpm.
So the
laundry has
19
TUB
CLEAN
If scrud is allowed to build-up in the machine it can result in stains on your clothes or unpleasant smell in
your washer.
Scrud is the way build-up that can occur within any washer when the fabric softener comes into contact
with Detergent, and according to particular degree of dirtiness or quality of water to be use,
in these case, use this program to clean inner tub and outer tub.
1
Press the POWER button to turn power
2
Press the PROGRAM button to select the TUB CLEAN program.
on.
Ex-Large WATER LEVEL
3
5
automatically.
Press the START/PAUSE button.
?
4
is set
Left time is
displayed.
After 10 minutes of water
?
Do not
?
Do not
supplement.
Add the
oxygenated
bleach
Detergent box.
place any laundry inside tub.
?
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid.
Note
Before
?
When
?
using
using
this program
lint inside lint filter.
place
any
This program takes about 3 hours to be
this program,
After
using
?
After
finishing
?
remove
this program, do not
?
?
remove
laundry
?
dirt inside filter.
this program, open the lid of wash to
Do not pour bleach into the tub
Do not leave diluted
Use this program
Do not
use
inside tub.
completed.
directly.
oxygenated bleach
It
might
once
for every month.
this program
repeatedly.
remove
cause
irritant odor.
damage
the tub.
inside tub for
It rusts the tub must drain the remained diluted
?
).
use
Close the lid.
?
(about 300 m
long time.
oxygenated water
out.
an
AditonalFucPrgm
20
D
AditonalFucPrgm
ELAY START (RESERVATION) Wash
DELAY START (RESERVATION) Wash is used to delay the finishing time of the
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time not the start time.
operation.
,
1
Press the POWER button to turn power
2
Press the PROGRAM button to select the
on.
washing program.
Select the program for laundry on the Control panel.
This program will not work in WOOL and DELICATE
Program.
3
Press the DELAY START
delayed washing
is to be
How to set the
(RESERVATION)
completed.
button to set the time when the
delay time.
you'd like your wash to finish at 9
in the figure below.
When you push the button the reservation time changes
3E 4E5E...12E 14E 16E...E 48E 3 repeatedly.
Example
:
It's 7
a.m. now.
p.m. set the
4
Add the
If
time
as
The
Detergent.
(RES.=DELAY)
appropriate quantity of Detergent marked next to
the
WATER LEVEL of WATER?DETERGENT.
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid
5
Add the
laundry
and press the START/PAUSE button.
When you press the START/PAUSE button the
blink.
6
light will
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
Water will be
Close the lid.
wash
Finish
The
to
washing will be finished according to
the
delayed time.
Note
If the lid is open, the machine will not
To select
START
work, and
an
alarm
signal will
alarm to remind you to close the lid.
washing program, spinning time, WATER LEVEL or HOT/COLD manually, press the DELAY
button and select the desired option. Then press the START/PAUSE button.
(RESERVATION)
laundry cannot be taken out immediately after the wash program ends, it is better to
spinning program (The laundry will be wrinkled if left for a long time after spinning.)
When the
.
an
omit the
21
OPTION
WASHING
When you
only
need the Wash, Wash/Rinse
or
Rinse
cycles,
these
can
be set
manually
1
Press the AUTO OFF
2
Wash
,
(POWER)
Wash+Rinse
,
button to turn power
Rinse
,
Rinse+Spin
,
Press the PROCESS button until above
(refer to p13)
light is on.
on.
Spin only options
Option Washing
When you want to only drain, wait until the water in the
washing tub drains completely and then, turn off the
power.
3
Press the WATER LEVEL button, to control the WATER LEVEL according
laundry. If you do not choose anything, it is set the Large
WATER LEVEL automatically.
(refer to page 12)
to the amount of
4
Add the
5
Press the START/PAUSE button.
6
Add the
laundry
into the
Detergent
washing
tub.
and close the lid.
Note
?
When
a
wash is
Wash, Wash/Rinse
completed.
?
If you do not
?
If
only
specify the
or
Rinse only
option is selected,
the water will not be drained off after the
WATER LEVEL, then Medium will be
Rinse is selected, the process will start from Water
Supply.
automatically
selected.
AditonalFucPrgm
22
O
AditonalFucPrgm
ther Useful Functions
Child Lock Function
If you want to lock all the
child lock
keys to prevent settings from being changed by
a
child,
you
can use
the
option.
How to Lock
1
Press the POWER button.
Turn Power
2
Press the START/PAUSE button to start
washing.
After all
3
on.
washing conditions
are
set
Press both the PROCESS button and the PROGRAM button
according to
the manual.
simultaneously.
During the wash program, all the buttons are locked
washing is completed or until the child- lock
function is deactivated manually.
and the remaining time will be displayed
alternately in child-lock mode.
until
"
"
How to Unlock
If you want to unlock
during wash, press both the PROCESS
and the PROGRAM button
simultaneously
again.
WASH OPTION
One
(OPTION)
or more
WASH OPTIONS
Wash program is
changed
can
be selected for FUZZY and JEAN
follows
according to
?
EXTRA WASH
:
Gives additional 3 min wash
?
EXTRA RINSE
:
Gives additional
eg.)
?
Mute
as
GENTLE SPIN
:
one
washing program.
selected WASH OPTIONS.
deep rinse
must add fabric softener
If you want EXTRA
RINSE, you
indication
in the final rinse. This maximize the fabric softener function.
beep rings
Gives GENTLE SPIN instead of normal
manually when
spin.
Option
If you want to
use
the
washing machine without alarm signal sounds, press both the
WATER LEVEL and
PROCESS buttons simultaneously.
To make buzzer
time.
work, press both the WATER LEVEL and PROCESS buttons simultaneously one more
23
Placing
Please
and
ensure
Leveling
that transit restraint has been removed before
your machine.
operating
Instal ion
1
Place the machine
on a
flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2 cm to the
right side and left sides of the machine for ease of
more
than 10
cm
installation.
At the rear,
a
minimum clearance of 10
cm
more
is
than
suggested.
2cm
more
than
2cm
Caution
If the washer is installed
spin
failure
It must be
2
on a
uneven,weak or tilted floor causing excessive vibration,
"
error can
placed
on a
happen to it.
firm and level floor to prevent
spin failure.
Check that the machine is level
Open the lid
same as
3
"
or
and look from above to
see
if it is
Top
view of the machine
shown.
the machine
Leveling
Lift the front of the
washing machine
the
until the surface bubble is
and twist
Adjustable Leg
placed in the center.
Adjustable legs
Level indicator
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or
electrical portable outlet device should be positioned so that it is not exposed to splashing
ingress
of moisture.
or
24
C
Instal ion
onnecting Water Supply Hose
Before connecting the Water Supply Hose to the water tap, check the hose type and
then choose the correct instruction here under.
Note that the Water Supply Hose supplied may vary from country to country, Make
sure to connect the blue inlet hose to the COLD water tap, and the orange inlet hose
to the HOT water tap.
Connecting
Water
Normal
1
Hose to water
Supply
Type
the
Untighten
(Normal tap without thread &
Fixing
screw
type inlet hose.)
Rubber
screw
Untighten the screw of the connector so
tap can be placed in the middle.
2
tap
packing
that the
screw
Connector
the connector to the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4
3
screws.
Attach the water
supply
hose
securely
to the
connector
Push the water
supply hose vertically upwards
that the rubber seal within the hose
completely to
can
Connector
so
adhere
the tap.
Water
Supply
4
Fixing
the connector to the water
supply
Hose
hose
Attach the water
then
5
tighten
it
supply hose to the connector and
by screwing it to the right.
Check the connection of water
supply
hose and the connector
After
connecting the hose, open the tap to check
for any water leakage.
If the water leaks, close the tap and start again
from step 1
Attention
The
washing machine is to be connected to the water mains using new hose-sets
not be reused.
and old hose-sets should
25
Normal
1
Type
Separate
(Normal tap without thread & one touch type inlet hose.)
Middle connector from Water
Supply
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose.
Hose
Middle
Fixed Sticker
connector
Pressing
Handle
Pressing
Rod
Water
2
Supply
Hose
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so
tap can be placed in the middle.
that the
Rubber
packing
screw
Fixed sticker
Note
In
case
tap is
too
Guide
large.
plate
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate.
3
Then follow
Rubber
packing
step1.
Fixing Connectors
to the
Tap
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4
4
screws.
Fixing Upper Connector
and Middle Connector
Remove the fixed sticker in between the
Connector
Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
5
Connecting
Middle
Connector
Fixed sticker
Middle Connector and Water
Supply
pressing rod of the Water Supply
separated from middle connector
and
then join it to the middle
Step1)
Connector
Middle
Connector
Hose
Press down the
Hose which
(refer to
was
Pressing
rod
connector.
Water
6
Check for water
leakage
After
connecting the hose, open the tap to check
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
skip step 1, water leakage may occur.
If you
Supply
Hose
Pressing
handle
Instal ion
26
C
Instal ion
onnecting Water Supply Hose
Screw
1
Type
Attach the water
supply
hose to the tap.
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
Water
tap
Rubber
Water
2
Connect the water
supply
Connect the water
Check water
connecting the hose,
for any water leakage.
?
Water
and then
leakage.
After
Connecting
Supply
hose to the tap.
supply hose to the tap
tighten it by screwing it to the right.
3
Packing
open the tap to check
Supply
Hose to the machine
supply hose to inlet valve of
washing machine, and then lock it by turning
the hose connecting part.
Connect the water
the
?
Check
to
see
if there is
a
rubber seal inside the
Hose connector
connector.
Rubber seal
Hose
27
Connecting
Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
Pump
Instal ion
Model
1
Fit the end of the drain hose to the outlet of the
2
Put the other end of the drain hose over the
drain pump and
tighten the clamp.
standpipe or
wash tub.
Hose
Guide
Within 50
mm
0.9~1.2m
Drain Hose
Note
To prevent siphoning, the drain hose should not extend more than 50 mm from the end of the hose
The discharge height should be approximately 0.9
1.2 m from the floor.
~
Non-Pump
1
Before
Model
connecting
Ensure that the hose
clip is
set
as
indicated here.
Clip
2
Connect the Elbow Hose
Push the elbow hose toward the
body of the
washing machine.
3
Place the Drain Hose
change the direction of the hose, pull out the
change the direction.
2.
Repeat Step
To
elbow hose and
guide.
28
G
CarendMitc
rounding
Method
Earth wire should be connected.
If the earth wire is not connected, there is
caused by the current leakage
possible
a
danger of
electric shock
.
Grounding
Method with Ground insert space Terminal
If the AC current outlet has
ground terminal, then
separate grounding
required. Note that AC
outlet
power
configurations may differ from country
a
is not
to
Ground Terminal
country
Outlet with
Other
Grounding
Method
Burying Copper
bury it
terminal.
Plate
Connect the Ground Wire
Plate and
ground
more
to
a
Ground
Copper
ground.
than 75cm in the
Ground Wire
75cm
Ground
Using Ground
Wire
ground Wire to
exclusively for Grounding.
Connect the
Using
a
the socket
possible,
employed
provided
Plate
Ground
Wire
Short Circuit Breaker
If grounding methods described above
a
Copper
are
not
separate circuit breaker should be
and installed by a qualified electrician
Short-circuit
breaker
Caution
?
?
To prevent a possible explosion, do not connect ground to a gas pipe
Do not connect ground to telephone wires or lightning rods. This may be
storms
?
Connecting ground to plastic has no
?
Ground wires should be connected when
effect
an
extension cord is used.
dangerous during electrical
29
Cleaning
Cold water
?
and Maintenance
washing
always use COLD water, we recommend that a WARM
intervals e.g. every 5th wash should be at least a WARM one.
If you
or
HOT wash be used
a
regular
as
sand),
at
When you have finished
?
?
Turn off taps to prevent the chance of flooding should
Always unplug the power cord after use.
When water supply into the tub is not clean
filter in the inlet valve occasionally.
(The figure of power cord and
water
or
the filter is
a
hose burst.
clogged
tap may vary according
with
to the
particles (such
clean the
country)
To Clean the Filter in the Inlet Valve
Close the tap before turning off the power.
Select both HOT/COLD and then press the
1
2
Turn off the power before
pulling out the cord.
4
Replace the filter after cleaning it.
[START/PAUSE] button to remove water
completely.
from the machine
After
3
removing the water supply
pull out the filter.
hose
Then
use a
brush to clean the filter.
Caution
Before
cleaning the filter,
the
impurities
in the water
supply hose
should be removed.
To Clean the Lint Filter
1
2
Pull out the lint filter from
Turn the net inside out
the tub in the direction
to clean the filter and
shown below.
rinse it with water.
3
Replace- the filter to the
original location. Push the
lip of the filter until a pop
sound is heard.
Note
?
If the lint filter is torn
To Clean the
1
or
damaged, purchase a new one from LG service center.
Pump casing (for pump model)
Place a towel on the
floor under the drain
pump cap. Excess
water may flow out.
2
Turn the cap
counter-
clockwise and
pull it out.
Cap
3
Remove any foreign
objects and fluff inside
pump casing and from the
filter.
Filter
4
Replace the cap. Insert the filter along
the guide ribs inside the pump casing.
Filter must face the guide ribs inside
pump casing and securely turn the cap
clockwise.
Guide rib
Filter
Caution
?
Check if water leaks after
reassembling. (The Rubber ring is in the cap)
CarendMitc
30
C
CarendMitc
leaning and
When there is
?
?
?
a
fear of
Maintenance
freezing
Close the water taps and remove the Water Supply Hose.
Remove the water which remains in the water supply.
Lower the drain hose and drain the water in the bowl and the drain hose
by spinning.
If frozen
?
?
?
supply hose, and immerse it in HOT water at approx.. 40˚C.
Pour approx.. 2 liters of HOT water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
Connect the water supply hose to the water tap and confirm that the washing machine performs the
Remove the water
and
supply
Wash Inner-tub
drainage of water.
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
use a clean soft cloth dampened with liquid Detergent, then rinse. (Do
the inner-tub
not use harsh or
Inlet Hoses
Hoses
connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit
sharp objects.
Exterior
Long
Vacations
Be
sure
water
be below
Cleaning
?
?
supply
freezing.
do
or
Add about two cups of
Stop the washer,
After
a
important that you occasionally clean the
powdered Detergent that contains phosphate.
soaking,
open the lid and leave it to soak
drain the washer and
Or use TUB CLEAN PROGRAM
run
it
Products that
Hydrocarbon
(Be
washer
or
during this procedure.
?
Use of
thinners and
or
liquids
can
damage your washer's
the
paintwork and components
etc.
can
are
dissolve
plastic
of your washer.
and blister
paint
flammable DO NOT put them in
control
panel.
in your washer may cause staining of the plastic components. The dye will not damage the machine
suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in
dyes
your washer.
Do not
machine
dryer.)
Some pretreatment sprays
we
cycle.
petrol, paint
lacquer thinners,
washing garments stained with these solvents as they
?
but
normal
diaper sanitizer will cause damage to
solvents i.e.
careful when
a
periodically.
might damage your washing
Concentrated bleaches and
overnight.
through
We do not recommend that you wash clothes
?
it is very
regular COLD water washing,
Let it operate for several minutes.
?
?
is shut off at faucets. Drain all water from hoses if weather will
Fill your washer with HOT water.
?
?
surface with
the Inside of your Washer
If you use fabric softener
inside of your washer.
?
gritty cleaners.)
use
your washer lid
as a
work surface.
31
Common
washing problems
Many washing problems involve poor soil & stain removal, residues of lint and
scum, and fabric damage. For satisfactory washing results, follow these
instructions.
Troubleshting
WASH PROBLEM
Problems
Poor soil
removal
Solutions & Preventive Measures
Possible Causes
?
?
Not
enough Detergent
Wash Water Temperature
too low.
?
?
?
the washer
Use WARM
or
HOT water for normal soil.
Temperature may be required according to
(refer to page 8)
cycle
sorting
?
Reduce load size.
pretreat stain
?
Wash with JEAN
Incorrect
?
Do not
amount of
Different Water
Incorrect wash
?
size,
soil and water Hardness.
?
Overloading
Use correct amount of Detergent for load
soil type.
or SPEEDY SOAK & JEAN wash cycle
heavy soiled laundry.
Separate heavily soiled items from lightly soiled ones.
Pretreat stain and heavy soil according to directions shown
for
?
?
on
Blue Stains
?
Undiluted fabric softener
dispensed directly
onto
?
?
fabric
page 7.
Rub the stain with bar soap. Wash.
Do not overfill fabric softener
liquid fabric
softener
See page 10 for
Black or gray
marks on
clothes
Yellow or
brown rust
stains
?
A
caused
buildup
by the
?
interaction of fabric softener
and
Detergent
can
flake off
?
and mark clothes
?
Not
?
Iron
water
or
manganese in
water
supply,
?
Keep the recommendations against Scrud(waxy buildup).
(refer to scrud page10.)
Use correct amount of Detergent for load
size,
amount of soil
To restore discolored load of whites,
use
rust
remover
safe
for fabric.
pipes,
water heater
instructions.
and water Hardness.
enough Detergent
or
more
dispenser and do not pour
directly onto fabric.
?
Install
nonprecipitating
water softener
or an
iron filter in
supply system for an ongoing problem.
Before washing, run water for a few minutes to clear lines.
your water
?
Lint
?
?
?
Incorrect
sorting
pocket
Overloading the washer
?
or
Detergent
?
Overloading
?
Undissolved
?
Use too
the washer
Detergent
much Detergent
or
Incorrect
use
of chlorine
?
?
Unfastened
zippers,
hooks, buckles
Ribs, tears and broken
?
Overloading
Degradation
Do not overload the washer
Do not overload the washer.
Some
Detergents need to be pre-dissolved, check the Detergent
instructions.
?
Try pre-dissolving the Detergent.
Increase Water Temperature
using HOT water safe for fabric.
Use proper amount of Detergent.
Never pour chlorine bleach
See page 9 for
?
Fasten
?
Remove
threads
?
synthetic fabrics and remove tissues
sorting and caring
?
bleach.
snags
towels, flannelette sheets, separately
?
?
?
eg
pockets
before loading.
?
Holes, tears,
givers
before wash. See page 7 for
?
Residue
Wash lint
from lint collectors eg
Tissues left in
directly on fabric.
adding liquid bleach.
zippers, hooks,
objects
in
and buckles.
pockets.
loading.
the washer
of fabric
?
Do not overload the washer.
See page 7 for
caring before
in
32
T roubleshooting
Before
Troubleshting
calling for service,
Symptom
Water Supply
Failure
check the
Error
problem against
Message
Check up
.
.
Is the water tap shut off?
Is the water supply cut off ?
.
Is the tap
.
Is the water pressure low
valve
.
.
Drainage
Failure
the list bellows.
or
water
supply hose frozen
or
Is the Hot hose connected to cold?
Is the Cold hose connected to hot?
Is the drain hose
.
Is the drain hose bent
.
Is the internal part of the hose
positioned correctly?
or placed too high?
(only pump model) clogged
Spin
Failure
Door(Lid) Open
Internal sensing
failure
Power failure
Overflow failure
is the filter of the inlet
clogged with impurities?
.
.
or
drain pump
with
impurities?
Check if electric power has gone off.
.
Is the
laundry evenly balanced?
.
Is the
washing machine placed on
.
Is the lid closed?
.
?
a
flat surface?
Please call your nearest LG Electronics service center
for help.
33
Terms
of Warranty
What Is Not Covered:
?
?
?
?
trips to your home to teach you how to use the product.
If the product is connected to any voltage other than that shown on the rating plate.
If the fault is caused by accident, neglect, misuse or Act of God.
If the fault is caused by factors other than normal domestic use or use in
Service
accordance with the owner's manual.
change the set-up of the product.
If the fault is caused by pests for example, rats or cockroaches etc..
Noise or vibration that is considered normal for example water drain sound, spin
sound, or warming beeps.
Correcting the installation for example, levelling the product, adjustment of drain.
Normal maintenance which recommended by the owner's manual.
Removal of foreign objects / substances from the machine, including the pump and
inlet hose filter for example, grit, nails, bra wires, buttons etc.
Replace fuses in or correct house wiring or correct house plumbing.
Correction of unauthorized repairs.
Incidental or consequential damage to personal property caused by possible defects
with this appliance.
If this product is used for commercial purpose, it is not warranted.
(Example : Public places such as public bathroom, lodging house, training center,
dormitory)
?
Provide instruction
on use
of product
or
?
?
?
?
?
?
?
?
?
If the
product is installed outside the normal service area, any cost of transportation
involved in the repair of the product, or the replacement of a defective part, shall be
borne by the owner.
34
S
pecification
Specifaton
H
D
W
WFT85C30(1)D(E,F)C(H,P,D,E,F,M)
Model
WFT10C30(1)D(E,F)C(H,P,D,E,F,M)
WF-TS1088TH
632(W)
Size
x
670(D)
x
980(H)
WFT85C30(1)D(F)
WFT10C30(1)D(F)
~
~
WF-TS1088TH
632(W)
x
670(D)
x
1005(H)
WFT85C30(1)E
WFT10C30(1)E
Water tab pressure
In
our
to the
30
-
800 kPa (0.3
-
8.0
~
~
kgf/cm2)
continuing effort to improve the quality of our appliances,
appliance without revising this manual.
it may be necessary to make
changes
Download PDF