LG | WF-T9011TH | LG WF-T8011TH Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODELS
:
WF-T7001(~6)PC(H/P)
WF-T7011(~6)PC(H/P)
WF-T8001(~6)TC(H/P)
WF-T8011(~6)TC(H/P)
WF-T7001(~6)PD(E/F)
WF-T7011(~6)PD(E/F)
WF-T8001(~6)TD(E/F)
WF-T8011(~6)TD(E/F)
WF-T9001(~6)TC(H/P)
WF-T9011(~6)TC(H/P)
WF-T9001(~6)TD(E/F)
WF-T9011(~6)TD(E/F)
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Record model
name
and serial number of the set.
Quote this information to your dealer when you require service.
P
roduct Features
The Turbo Drum
washing machine does not operate with the lid open.
opened during wash, rinse and spin cycles, the machine will stop
automatically.
If the lid is
Fuzzy Logic Control
A built-in load
automatically detects and measures the laundry load a
microprocessor optimizes washing conditions such as ideal water consumption
and washing time.
sensor
into the Electronic Control
Advanced
technology is built
washing result.
the best
SENSING
START
Laundry
Sensor
Water Level Sensor
System
which
ensures
SETTING
Optimum
Washing
WASHING
Condition
Turbo Drum
While the "Punch
AUTO
POWER
OFF
washing
3"
+
pulsator
rotates in one
direction, the Turbo Drum rotates in the opposite
direction. This creates an
flow of water in both
even
the upper and lower parts of the drum,
enhanced washing and rinsing action.
Punch
The
+
punch
resulting
in
an
3 washing action
action's powerful vertical water thrust
combined with the
rotating pulsator
improves washing performance and
movement
reduces tangles.
3
Spinning mini-pulsators create powerful jets of
laundry up and down in the
drum to ensure your laundry is evenly and
thoroughly washed.
water which move the
Lint Filter
Lint and loose threads from
during
the
filters for
washing cycle
a
laundry generated
caught by the lint
are
cleaner wash.
WF-T90/T80 Series
WF-T70 Series
:
:
Double Lint Filters
Single
Lint Filter
Auto Restart
In the event of
its
a
power failure, the washing machine will
is resumed.
automatically
interrupted cycle when power
Applied
models
:
WF-T7001(~6)PD(E/F),WF-T7011(~6)PD(E/F)
WF-T8001(~6)TD(E/F),WF-T8011(~6)TD(E/F)
WF-T9001(~6)TD(E/F),WF-T9011(~6)TD(E/F),
resume
C
ontents
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the
Troubleshooting section. If you review
may not need to call for service at all.
Introduction
Before
Starting
Safety
to Wash
our
chart of
Troubleshooting Tips first,
information
you
4
Identification of Parts
5
Function Information
6
Preparation Before Washing
7
Use of Water,
Bleach
8
Guide for Stain Removal
11
Detergent,
and Softener
Special
Function of each Button
Washing Programs
Fuzzy
Wash
Economy
Additional Function
Options
Installation
Care and Maintenance
12
(Normal Wash)
Wash
14
Blanket Wash
14
Wool Wash
14
Soak Wash
14
Delay Start (Reservation)
Wash
Specification
16
Option Washing
17
Other useful Functions
18
Placing
and
Leveling
Connecting
Water
Connecting
Drain Hose
Grounding
Supply
19
Hose
Method
Cleaning
Troubleshooting
14
20
23
24
25
Cleaning
and Maintenance
26
Common
washing problems
27
Troubleshooting
28
Specification
29
4
S
afety
information
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
Introducin
For your better understanding. these precautions are separated into two categories.
We urge you to pay special attention to them in the interests of your own safety, and
machine against damage:
Caution
Violation of these
Attention
Following
these
guidelines could result in
guidelines
serious
will protect your machine
Installation
appliance
is not intended for
or
use
infirm persons without
Supply
to
cord
sure
to
two persons should move it.
Do not install the washer where it is
exposed to sunlight, wind, rain, etc.
The appliance must be positioned so
the plug is accessible
ground the earth wire or connect it
Make
sure
ground detector after you put the power cord
into an outlet.
not move.
When the power cord is loose, do not
Do not damage the power cords.
hands.
Do not
plug many cords into
one
feet under this
place any rugs or heavy material
the power cord.
Since the machine is heavy, a minimum of
and
a
use
or
over
source.
Make
against damage.
Do not
Young children should be supervised to ensure that
they do not play with the appliance.
The base opening must not be obstructed by
carpeting when the washing machine is installed on
a carpeted floor.
Power
injury.
Do not put your hands
machine.
by young
supervision.
Do not install the washing machine in a damp place.
Keep the washing machine away from fire or heat
children
protection of your
Attention
Caution
The
fatal
or
or
it.
plug
that
the power cord is free of dust
properly so that the cord will
it in
Do not touch the power cord with wet
outlet at the
same
time.
If the power cord or fuse is damaged, it must be
replaced by the manufacturer or its service agents or
similarly qualified people in order to avoid a hazard.
If the appliance is supplied from a cord extension
set or electrical portable outlet device the cord
extension set or electrical portable outlet device
should be positioned so it is not subject to splashing
or ingress of moisture.
Operation
When you take out the
fall into the washer.
laundry, be careful not to
?
Do not put hands into the rotating tub.
Do not sprinkle water over the buttons.
Make
sure
the lid is closed
activating the machine.
more than 50˚C(122˚F)
?
Do not pour
into the tub.
?
Do not wash any
during operation of the
Do not put heavy objects on the machine.
Unplug the cord when the machine is not in
Do not press the buttons with sharp objects.
Check the hose connection and open the tap
before
spin cycle.
Maintenance
?
?
?
waterproof materials.
Do not pour corrosive materials
over
use.
the
water
washing machine.
or
It will
bleach
cause
damage to the power cord or the machine.
Never disassemble or remodel the washer
and power cord by yourself. Only a
qualified technician should work on the
machine.
5
I
dentification of Parts
Body
Power cord
Water
supply hose(1
Powder
detergent
EA
or
2EA)
box
()
Softener inlet
()
Bleach
dispenser
()
Inner tub
Lint filter
control
Drain hose
panel
for pump model
Drain hose for
Adjustable leg
non
pump model
Accessories
Water
supply
hoses
Drain hose
Anti-rat
cover
or
or
or
1 Each for cold and
hot water
Note
Part
can
be different
according to the model.
(option)
Introducin
6
Function
Information
Our machine provides various washing methods which suit various conditions and
types of laundry.
Introducin
Different
types of laundry washing
Fuzzy
(Normal) Wash
Use this
Program for normal clothes except for woolen clothes and lingerie.
automatically detects the quantity of laundry and selects the appropriate
power, washing time, rinsing time and spinning time. (refer to page14)
The
water
sensor
Economy
level, wash
Wash
Economy wash can be selected to wash lightly
soiled clothes of less than 3.0
kg in a short time. (refer to page14)
Blanket Wash
Blankets of different size
can
be
easily washed.
(refer to page14)
Wool Wash
Delicate clothes
(lingerie,
wool
etc.) which
may be
easily damaged can be washed. (refer to page14)
Soak Wash
Soak Wash
and
Other
can
be selected to wash
heavily soiled laundry by soaking
in water for
some
time to
grime. (refer to page14)
washing
methods
Delay Start (Reservation)
Wash
Delay Start (Reservation) Wash is used to delay the finishing time of the operation.
Delayed Start washing can be set according to preference. (refer to page16)
Option
Wash
Spin, Rinse/Spin, Rinse, Wash/Rinse,
and Wash
only options can
selected.
(refer to page17)
remove
dirt
7
Before
Preparation
Washing
BeforStaingWsh
Care Labels
*
care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Look for a
Sort clothes into loads that
can
be washed with the
same
wash
cycle, water temperature and spin speed.
Sorting
To get the best
results, different fabrics need to be washed in different ways.
?
SOIL
?
COLOR (Whites, Lights, Darks)
LINT (Lint producers, Collectors)
?
(Heavy, Normal, Light)
Lint Producers
Terry cloth, Chenile, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Lint Collectors
Check before
?
?
?
?
Check all
pockets to make sure that they are empty. Things
Remove belts,
?
Check the
underwires,
as
nails, hairclips, matches,
etc. to
prevent damage
to the
machine
or
larger during washing.
your clothes.
WIRE
washing instructions.
Remove tissue in pockets.
Pretreatment
on
stains
heavy
or
soil
Pretreat shirt collars and cuffs with
Before
?
such
Pretreat any dirt and stains.
sure the clothes are washable in water.
Make
?
Loading
pens, coins, and keys can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become
?
?
Separate clothes according to the type and amount of soil.
Separate white fabrics from colored fabrics.
Separate lint producers and lint collectors.
Use
a
a pre-wash product or liquid detergent when placing them in the washer.
washing treat special stains with bar soaps, liquid detergent or a paste of water and granular detergent.
pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The
longer they are left the harder they are to remove.
(For more detail refer to page11)
Loading
Do not wash fabrics
Load Size
The water level should just
cover
the clothes.
Adjust the load size accordingly.
Loosely load clothes no higher than the top row of holes in the washer tub. To
add items after washer has started, press Start button and submerge additional
items. Close the lid and press Start button again to restart.
Light
and
WARNING
containing flammable materials (waxes, cleaning fluids, etc.).
Large-sized clothing
Clothes like downs and woollens
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer
can completely remove oil.
dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Do not
light weight, large and float easily. Use a nylon net and
laundry floats during the wash cycle, it may
become damaged. Use dissolved detergent to prevent the detergent from clumping.
wash them in
a
are
small amount of water. If the
Long laundry items
nylon nets for long, delicate items.
Use
Fasten
laundry with long strings or long length a net will prevent
zippers, hook, and strings to make sure that these items don't snag on other clothes.
tangling during washing.
Nylon net is not supplied by LG.
For
,
8
of Water,
Use
BeforStaingWsh
Using
Detergent,
Bleach and Softener
Water
Amount of Water Level
?
?
This machine detects the
will be shown
on
the control
?
The
?
When the water level is
following table
though
?
the
same
The amount of
Water
a
it may differ depending
the control panel.
automatically detected,
cup in the
used)
X-LARGE
LARGE
MEDIUM
SMALL
D
T
diagram is
on
about
on
the
quantity of laundry even
40g for concentrated detergent.
temperature
The machine sets the
You
appropriate temperature automatically according to the wash program
change
by pressing the WATER TEMP button. (refer to p12)
The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning
.
the water temperature
can
results. We recommend temperatures of:
White
HOT 49~60°C...(120-140˚F)
-
-
-
WARM
COLD*
29~40°C...(85-105˚F)
18~24°C...(65-75˚F)
items, diapers, underclothing
and
heavily soiled,
colorfast items.
Most items
Only very bright colors with light soil.
washing in cold water additional steps may be needed:
Adjust detergent amount and pre-dissolve detergent in warm water
When
-
-
-
-
*
(to
WATER.DETERGENT
be
panel.
water level is indicated
?
?
then sets the water
shows the amount of water.
?
?
quantity of laundry automatically,
level and proper amount of detergent.
When you select a wash program, the water level and amount of detergent
Pretreat spots and stains
Soak heavily soiled items
Use
appropriate bleach
Temperature below 18°C...(65˚F) will not activate laundry additives and may cause lint, residue, poor
cleaning, etc. In addition, detergent manufactures and care labels define cold water as 26~29°C...(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the detergent will not activate and clean
effectively.
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be
necessary for
severe cases.
Using Detergent
Detergent
Follow the
Use
more
detergent package directions. Using too little detergent is a common cause of laundry problems.
detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.
Choosing
the
right detergent
We recommend the
use
of domestic
detergent, (powder, liquid or concentrated). Soap flakes or
washing woolens
granulated soap powders should not be used in your washing machine. When
remember to use detergent suitable for washing woolens.
9
Using Detergent
How much
detergent
When you select a wash program the water level and the amount of detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated
detergent.
The correct amount of detergent will vary depending on the amount of soil in your clothes
and work cloches may need more detergent, while bath towels usually need less.).
For
liquid and concentrated detergents,
follow the recommendations of the
(Jeans
detergent manufacturer.
Note: To check you are using the correct amount of detergent, lift the lid of your machine
about half-way through the wash. There should be a thin layer of foam over the surface of the
good, but it does not contribute to cleaning your clothes. No
enough detergent has been used; soil and lint can settle back on the clothes
water. Lots of foam may look
foam
means
not
or
washing machine.
If excess detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, so use it accordingly.
the
Adding
the
detergent
Open the detergent dispenser and deposit the appropriate
Powder Detergent Box
amount of detergent
()
where you deposit the detergent
Powder Detergent dispenser.
Where you
Some detergents MUST be fully dissolved before
deposit the
adding to your machine to get the best wash results. detergent
Check the instructions on the detergent packet.
If you use powdered detergent it is essential that the required amount be fully dissolved in very hot water
before being added to warm or hot water for the actual wash.
Pre-dissolving detergent in warm water when washing in cold water can improve its performance.
Using Liquid
?
?
?
?
Bleach
Bleach
clothing care label for special instructions and separate the
laundry to be bleached
Dilute liquid chlorine bleach.
Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
Check
dispenser
()
Never pour undiluted liquid bleach directly onto clothes
This may cause change of color or damage the laundry.
or
into the wash basket.
Do not mix chlorine bleach with ammonia
as
vinegar and/or rust remover. Mixing can reduce
toxic gas which may cause death.
Do not pour powdered bleach into bleach
or
acids such
a
dispenser.
10
U
BeforStaingWsh
se
of Water,
Detergent,
Bleach and Softener
Fabric Softener
Using
Dilute fabric softener with water.
Undiluted fabric softener may result in spots that look like
oil stains.
?
Measure and add the recommended amount of fabric
softener into the compartment marked with this smbol(
?
Softener
max
)
).
Fabric softener is
Follow manufacturer's direction.
in
the
final
rinse.
automatically dispensed
Do not overfill. The dispenser hold
Never add more than 35mL.
dispenser (
or
35mL.
Overfilling can cause early dispensing of the fabric
which could result in stained clothes. A cup with
a
softener
pouring spout will help
you avoid
spilling.
The effect of adding fabric softener may vary according to its viscosity. The stickier fabric softener makes its
effect the lower. For a sticky fabric softener it is recommended that it be diluted with water, then be manually
put during the time when the washer beeps several times before the final rinse. This function informing
correct time to dispense manually is optionally applied to some models. Please keep it in mind that fabric
softener has to be diluted with water before dispensed and never poured directly on clothes.
?
Attention
Do not mix with
detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Option washing is not designed to be used with fabric
Scrud(Waxy
Build
softener
dispenser.
up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it
smell in your washer.
If you wish to
?
?
?
?
?
use
fabric softener
we
result in stains
on
your clothes
or an
unpleasant
recommend
Using fabric softener sparingly.
When filling the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle is finished.
Clean your machine regularly. (refer to page 26)
Cold water washing increases the chance of this build-up occurring. We recommend a regular warm or hot
wash e.g. every 5th wash should be at least
?
can
Fabric softener of thinner
build-up.
a warm one.
consistency is less likely to
leave residue
on
the
dispenser and contribute to
a
11
Special
Guide for Stain Removal
WARNING
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
?
?
?
?
?
?
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of children's reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
For successful stain removal:
?
Remove stains
?
Determine the kind of
promptly.
stain,
then follow the recommended treatment in the stain
removal chart below.
?
To pretreat
stains, use a prewash product, liquid detergent, or a paste made from
granular detergent and water.
?
Use cold water
?
Check
?
Check for colorfastness
?
Rinse and wash items after stain removal.
care
on
unknown stains because hot water
label instructions for treatments to avoid
by testing
stain
can
on
remover on an
set
stains.
specific fabrics.
inside
Follow fabric care label
instructions
seam.
Stain Removal
STAIN
Adhesive tape, chewing gum,
rubber cement
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
TREATMENT
Apply ice. Scrape off excess. Place stain face down on paper towels.
nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash
using cold water and bleach
Saturate with
prewash stain remover or
safe for fabric.
Rinse with cold water. Rub with bar soap. Or pretreat
safe for fabric.
or
soak with
product containing enzymes. Wash using bleach
Mud
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Mustard, tomato
Pretreat with prewash stain
Nail polish
May be
Paint, varnish
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Ink
Mildew, scorch
Rust, brown or yellow
discoloration
Shoe polish
Repeat,
remover.
Wash
using bleach
safe for fabric.
Place stain face down on paper towels. Apply nail polish
impossible
replacing paper towels frequently. Do not use on acetate fabrics.
to
remove.
remover
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
to back of stain.
detergent and
: Pretreat with a paste of granular detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub detergent into dampened area, Wash using bleach
LIQUID
safe for fabric.
BeforStaingWsh
12
F
BeforStaingWsh
Water
unction of each Button
temperature button (option)
Water level button
(indication of detergent amount)
Use to select water temperature.
Pressing the button allows you to select
Cold
Cold
Warm
(Hot&Cold)
respectively.
Default
?
Hot
adjust the water level as required. The appropriate
detergent is shown next to the water level in
the WATER-DETERGENT diagram
Use to
amount of
setting is Cold.
?
Water level is
automatically selected for fuzzy (normal)
program.
The following
settings
pushed
LARGE
HOT
COLD
indicated
?
Use it to
adjust the strength of
water current
?
Power
option
in sequence
NORMAL
GENTLE
?
selections
as
light up
Adjustment
washing
The time increases when the button is
be made while
?
...46
To cancel
48
delay time,
(refer to page 16)
Note
The control
?
pushed.
following settings are indicated as the
12
pushed 3 4 5 ...11
16
STRONG
can
The
button is
follows
NORMAL
delayed finishing time.
Use to set
?
panel may differ according to different models
HOUR
TIME
LEFT
MIN.
Use to select
SOAK,
WASH, RINSE and
SPIN functions
14
3 HOUR.
turn
DELAY
Process button
button
?
?
SMALL
EX-LARGE
LARGE
MEDIUM
SMALL
NORMAL
Delay Start (Reservation)
a
the button is
WATER.DETERGENT
STRONG
GENTLE
Wash power button
as
LARGE
MEDIUM
WARM
are
EX-LARGE
the power switch off.
desired.
as
13
Time
Start/ Pause button
left, Delay Start (Reservation), Alarm indication
?
?
Time left
-
During operation, the remaining time is indicated.
?
Delay Start indication (Reservation) When delay start (reservation)
program is selected, it indicates the finishing time. (RES.=DELAY)
?
Alarm indication -When
-
indicate the
abnormality.
?
?
an error
For
occurs,
example,
an error
message appears to
indicates that the lid is
IN.
FUZZY
ECONOMY
BLANKET
WOOL
pause the
stopping.
AUTO OFF
(Power) button
AUTO OFF
SOAK
WASH
RINSE
SPIN
or
The power goes off
automatically 10 minutes
after
open.
UR
Use to start
washing process.
Repeats start and pause by
pushing the button.
?
Use to turn the power
off.
?
Push
again
on or
off
START
PAUSE
?
on or
and power goes
The power goes off
automatically about 10
seconds after the wash is
finished.
Child lock function
Use to lock
or
Program
unlock the control
buttons to prevent
from
settings
being changed by a child.
To lock, push the PROCESS
and
PROGRAM buttons
simultaneously and to unlock
push them one more time during
the washing process.
(refer to page 18)
?
?
?
button
Use for
selecting wash program.
This button allows you to select 4 different programs
for different kinds of laundry and dirtiness.
program selections light up in sequence
FUZZY (NORMAL)
ECONOMY
WOOL
program
FUZZY (NORMAL)
by pressing the button.
etc.
as
follows:
BLANKET
Select the desired
BeforStaingWsh
14
Washing Programs
WashingProm
AUTO OFF
Add
the
Washing
Programs
Add
the detergent
laundry
Fuzzy Washing
(Normal Wash)
1
2
4
Used for normal loads, this mode
automatically selects the most
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
Add the appropriate
quantity of detergent as
indicated by the water
level next to WATERDETERGENT.
Or follow the detergent
manufacturer's
instructions
detects the size of the load and the
ideal wash power and wash, rinse
and spin times are set accordingly
Economy Wash
washing lightly
1
3
5
2
Use this mode when
solided clothes for
a short
Select the
ECONOMY
time. The
weight should be under 3.0kg.
program on
the Control
panel.
Blanket Wash
Use blanket program when
Blankets of different sizes
1
5
2
3
washing
Spread the
blanket
evenly in
the tub
Wool Wash
Use this program for washing delicate
1
3
as lingerie and woolens.
(wash only "water washable" clothes)
Before washing your woolens check
the care label for the washing
Select the
Blanket
program on the
Control panel.
5
2
fabrics such
instructions.
program on
the Control
(wash only water washable clothes)
panel.
1
Soak Wash
Use this mode for washing
excessively dirty laundry by soaking
in water for some time to
remove
proteins and fats. 'SOAK' mode can
be used with all washing programs
simultaneously except for 'WOOL
& ECONOMY' program.
Use neutral detergent
appropriate for the
laundry.
When washing
Select the
WOOL
4
2
woolens use a mild
detergent recommended for washing wool.
3
6
SOAKwill not
work in WOOL
& ECONOMY
Program.
Keep pressing the PROCESS button until the SOAK light is on and then WASH,
RINSE, SPIN lights are on simultaneously.
If necessary, select the desired washing process from
(SOAK+WASH+RINSE+SPIN), (SOAK+WASH+RINSE),
(SOAK+WASH) manually.
SOAK
WASH
RINSE
SPIN
15
Close the lid
3
Caution & Note
Finish
6
5
If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the water level.
The pulsator rotates for 8
seconds to detect the
laundry load.
Then the water level and
the amount of detergent to
be used will be shown and
water will be supplied.
4
4
4
Water will be supplied
for 2 minutes after the
start of the wash to
supplement the water
the laundry has
absorbed.
6
When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.
With
lightweight bulky loads, water level
can
be set low.
Changes to water temperature (hot/cold) and
are possible during operation.
(refer to page 12)
wash level
7
6
7
6
7
Never wash electric blankets.
Use a nylon net for washing cashmere blankets
to prevent them floating out of the tub.
Never wash carpets in the washer.
Water may splash out when washing light
laundry such as a cashmere blanket or bed
sheet with water set at high level.
When
setting the water level manually, do not
prevent damage to laundry.
with
hot
water
Washing
may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still
set to MEDIUM to
contain some water. This is normal.
5
The water level and the
amount of detergent to be
used will be shown and
water will be supplied.
7
8
Soak Wash cannot be selected for the Wool
Wash program.
WashingProm
16
D
AditonalFucOps
elay Start (Reservation) Wash
Delay Start (Reservation) Wash is used to delay the finishing time of the
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time not the start time.
operation.
,
1
Press the POWER button to turn power
on.
AUTO OFF
2
Press the PROGRAM button to select the
washing program.
Select the program for laundry on the Control
This method will not work in Wool Program.
3
Press the DELAY START
(Reservation) button
be completed.
is to
delayed washing
How to set the
to set the time when the
delay time.
you'd like your wash to finish at 9
set
the
time
as
in the figure below.
p.m.
When you push the button the reservation time changes 3 4
...12
14
16
48 3 repeatedly.
Example
:
It's 7
a.m. now.
panel.
If
5
DELAY
HOUR
TIME
LEFT
MIN.
(RES.=DELAY)
...
4
Add the
detergent.
The
appropriate quantity of detergent marked next to
water level of
the
WATER-DETERGENT.
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid
5
Add the
laundry
and press the START/PAUSE button.
When you press the START/PAUSE button the
blink.
6
an
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
Close the lid.
Water will be
Finish
The
wash to
light will
washing will be finished according to
the
delayed time.
Note
If the lid is open, the machine will not
work, and
an
alarm
signal will alarm to remind you
to close the
washing program, spinning time, water level or hot/cold manually, press the Delay Start
(RESERVATION) button and select the desired option. Then press the START/PAUSE button.
To select
laundry cannot be taken out immediately after the wash program ends, it is better to omit the
spinning program (The laundry will be wrinkled if left for a long time after spinning.)
When the
.
lid.
17
Option Washing
When you
only
need the Wash, Wash/Rinse
Rinse
or
these
cycles,
can
be set
manually
1
Press the AUTO OFF
(Power)
button to turn power
on.
AUTO OFF
2
Wash
Wash+Rinse
,
,
Rinse
,
Rinse+Spin
,
Press the PROCESS button until above
(refer to page 13)
light is on.
Spin only options
Option Washing
When you want to only drain, wait until the water in the
washing tub drains completely and then, turn off the
power.
3
Press the WATER LEVEL button, to control the water level according to the
laundry. If you do not choose anything, it is set the LARGE water
level automatically.
(refer to page 12)
amount of
4
Add the
5
Press the START/PAUSE button.
6
Add the
laundry
into the
detergent
tub.
washing
and close the lid.
Note
?
When
a
Wash, Wash/Rinse or Rinse only option is selected,
after the wash is
completed the water will not be
drained off, If you wish to drain the water, press the SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button
.
?
?
If you do not
specify
If only Rinse is
the water level, then Medium will be
selected, the process will
start from Water
automatically
Supply.
selected.
AditonalFucOps
18
O
AditonalFucOps
ther Useful Functions
Child Lock Function
If you want to lock all the
child lock
keys to prevent settings from being changed by
a
child,
you
can use
the
option.
How to Lock
1
2
Press the POWER button.
AUTO OFF
Turn Power
Press the START/PAUSE button to start
washing.
After all
3
on.
washing conditions
are
set
according to the manual.
Press both the PROCESS button and the PROGRAM button
simultaneously.
During the wash program, all the buttons are locked
washing is completed or until the child- lock
function is deactivated manually.
and the remaining time will be displayed
alternately in child-lock mode.
until
"
"
How to Unlock
If you want to unlock
during wash, press both the PROCESS
and the PROGRAM button
simultaneously
again.
Auto Restart
Although the machine will not work during a power failure or if power is interrupted,
it will start again automatically from the point in the cycle when it stopped
applied
Mute
models
:
when power is resumed,
WF-T7001(~6)PD(E/F),WF-T7011(~6)PD(E/F)
WF-T8001(~6)TD(E/F),WF-T8011(~6)TD(E/F)
WF-T9001(~6)TD(E/F),WF-T9011(~6)TD(E/F)
Option
If you want to
use
the
washing machine without alarm signal sounds, press both the
WATER LEVEL and
PROCESS buttons simultaneously.
To make buzzer
time.
work, press both the WATER LEVEL and PROCESS buttons simultaneously one more
19
and
Placing
1
Leveling
Instal ion
Place the machine
on a
flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2cm to the
right side and left sides of the machine for ease of
than 10cm
more
installation.
At the rear,
more
a
minimum clearance of 10cm is
than
2cm
suggested.
more
than
2cm
2
Check that the machine is level
Open the lid
same as
3
and look from above to
see
Top
view of the machine
if it is
shown.
Leveling
the machine
Lift the front of the
washing machine and twist
Adjustable Leg until the washing machine is
placed evenly.
the
Adjustable legs
SETTING SCREW
Installing the Anti-Rat Cover (option)
Insert the anti-rat cover to be firmly
fixed from the back of washing
machine and screw it (1pcs)
Anti-Rat Cover
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
20C
Instal ion
onnecting
Supply Hose
Before connecting the Water Supply Hose to the water tap, check the hose type and
then choose the correct instruction here under.
Note that the Water Supply Hose supplied may vary from country to country, Make
sure to connect the blue inlet hose to the cold water tap, and the orange inlet hose to
the hot water tap.
Connecting
Water
Normal
1
Water
Supply
Hose to water
Type
the
Untighten
(Normal tap without thread &
Fixing
screw
type inlet hose.)
Rubber
screw
Untighten the screw of the connector so
tap can be placed in the middle.
2
tap
packing
that the
screw
Connector
the connector to the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4
3
screws.
Attach the water
to the connector
Push the water
supply
hose connects
supply hose vertically upwards
that the rubber seal within the hose
can
securely
Connector
so
adhere
completely to the tap.
Water
Supply
4
Fixing
the connector to the water
supply
hose
Attach the water
then
5
tighten
it
supply hose to the connector and
by screwing it to the right.
Check the connection of water
After
supply
connecting the hose, open the tap to check
for any water leakage.
If the connection leaks, close the tap and start
again from step
1
hose and the connector
Hose
21
Normal
1
Type
Separate
(Normal tap without thread & one touch type inlet hose.)
Middle connector from Water
Supply
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose while pressing them.
Hose
Middle
Fixed Sticker
connector
Pressing
Handle
Pressing
Rod
Water
2
Supply
Hose
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
Rubber
packing
screw
Fixed sticker
Note
In
case
tap is
too
Guide
large.
plate
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate.
3
Then follow
Rubber
packing
step1.
Fixing Connectors to
the
Tap
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
4
Fixing Upper Connector
and Middle Connector
Remove the fixed sticker in between the
Connector
Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
5
Connecting
Middle
Connector
Fixed sticker
Middle Connector and Water
Supply
pressing rod of the Water Supply
separated from middle connector
and
then join it to the middle
Step1)
Connector
Middle
Connector
Hose
Press down the
Hose which
(refer to
was
Pressing
rod
connector.
Water
6
Check for water
After
leakage
the
hose, open the tap to check
connecting
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
skip step 1, water leakage may occur.
If you
Supply
Hose
Pressing
handle
Instal ion
22
C
Instal ion
onnecting
Screw
1
Water
Supply Hose
Type
Attach the water
hose to the tap.
supply
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
Water
tap
Rubber
Water
2
Connect the water
supply
Packing
Supply
hose to the tap.
Connect the water
tighten it by
3
supply hose to the tap and then
screwing it to the right.
Check water
leakage.
After
connecting the hose, open the tap to
for any water leakage.
Connecting
Water
Supply
Connect the water
the
check
Hose to the machine
supply hose to
inlet valve of
and then lock it by
washing machine,
connecting part.
turning
the hose
Check
to
see
if there is
a
rubber seal inside
Hose connector
the connector.
Rubber seal
Hose
23
Connecting
Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
Pump
Instal ion
Model
1
Fit the machine end of the drain hose to the outlet
2
Put the other end of the drain hose over the
of the drain pump and
tighten the clamp.
standpipe or
wash tub.
Hose
Guide
Within 50mm
0.9~1.2m
Drain Hose
Note
To prevent siphoning, the drain hose should not extend more than 50mm from the end of the hose
The discharge height should be approximately 0.9
1.2m from the floor.
~
Non-Pump
1
Before
Model
connecting
Ensure that the hose
clip
is set
as
indicated here.
Clip
2
Connect the Elbow Hose
Push the elbow hose toward the
body of the
washing machine.
3
Place the Drain Hose
change the direction of the hose, pull out the
change the direction.
Repeat Step2.
To
elbow hose and
guide.
24
G
CarendMitc
rounding
Method
Earth wire should be connected.
If the earth wire is not connected, there is
caused by the current leakage
possible
a
danger of
electric shock
.
Grounding
Method with Ground insert space Terminal
If the AC current outlet has
ground terminal, then
separate grounding
required. Note that AC
outlet
power
configurations may differ from country
a
is not
to
Ground Terminal
country
Outlet with
Other
Method
Grounding
Burying Copper
bury it
more
terminal.
Plate
Connect the Ground Wire
Plate and
ground
to
a
Ground
Copper
ground.
than 75cm in the
Ground Wire
75cm
Using Ground
Ground
Wire
Copper
ground Wire to the socket provided
exclusively for Grounding.
Plate
Connect the
Using
a
Short Circuit Breaker
If grounding methods described above
possible,
employed
a
Ground
Wire
are
not
separate circuit breaker should be
and installed by a qualified electrician
Short-circuit
breaker
Caution
?
?
To prevent a possible explosion, do not connect ground to a gas pipe
Do not connect ground to telephone wires or lightning rods. This may be
storms
?
Connecting ground to plastic has
?
Ground wires should be connected when
no
effect
an
extension cord is used.
dangerous during electrical
25
Cleaning
When water supply into the tub is not clean or the filter is clogged with particles(Such
as sand), clean the filter in the inlet valve occasionally.(The figure of power cord and
water tap may vary according to the country)
To Clean the Filter in the Inlet Valve
Close the tap before
1
turning off the
power.
Select both hot/cold and then press the
[START/PAUSE] button to remove
water from the machine
removing the water
supply hose pull out the filter.
Then
use a
Turn off the power before
pulling out the cord.
4
Replace the filter after cleaning it.
completely.
After
3
2
brush to clean
the filter.
Caution
Before
cleaning the filter, the impurities in the water supply hose should be removed.
To Clean the Lint Filter
1
Pull out the lint filter from
2
Turn the net inside out
the tub in the direction
to clean the filter and
shown below.
rinse it with water.
3
Replace- the filter to the
original location. Push the
lip of the filter until a pop
sound is heard.
Note
?
If the lint filter is torn
To Clean the
1
damaged, purchase a new
one
from LG service center.
Pump casing (for pump model)
Unfasten 4
back
or
screws
of the
cover.
2
Turn the cap as shown in
diagram and unfasten it.
Remove
as
foreign objects
pin, button, coin,
3
Reassemble the cap to
the arrow direction and
fasten it.
such
etc
(Bottom view)
(Bottom view)
Self-cleaning function(for pump model)
In the initial stage of every washing machine process, the drain pump works for 3~5seconds to pump out
water with dirt from the washing tub. It helps to keep the wash tub clean and improve pumping ability.
Caution
?
Check if water leaks after
reassembling. (The
Rubber
ring
is in the
cap)
CarendMitc
26
C
CarendMitc
leaning
and Maintenance
When there is a fear of
?
?
?
freezing
Close the water taps and remove the Water Supply Hose.
Remove the water which remains in the water supply.
Lower the drain hose and drain the water in the bowl and the drain hose
by spinning.
If frozen
?
?
?
supply hose, and immerse it in hot water at approx.. 40˚C.
Pour approx.. 2 liters of hot water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
Connect the water supply hose to the water tap and confirm that the washing machine performs the
Remove the water
supply
and
Wash Inner-tub
drainage of water.
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
use a clean soft cloth dampened with liquid detergent, then rinse. (Do
the inner-tub
not use harsh or
Inlet Hoses
Hoses
connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit
sharp objects.
Exterior
Long
gritty cleaners.)
Vacations
Be
sure
water
be below
supply
freezing.
surface with
is shut off at faucets. Drain all water from hoses if weather will
Cleaning the Inside of your Washer
If you use fabric softener or do
the inside of your washer.
?
?
?
regular cold water washing,
it is very
important that you occasionally clean
Fill your washer with hot water.
Add about two cups of
a
powdered detergent that contains phosphate.
Let it operate for several minutes.
?
Stop the washer,
?
After
soaking,
open the lid and leave it to soak
drain the washer and
run
it
overnight.
through
We do not recommend that you wash clothes
a
normal
cycle.
during this procedure.
27
Common washing problems
Many washing problems involve poor soil & stain removal, residues of lint and
scum, and fabric damage. For satisfactory washing results, follow these
instructions.
Troubleshting
WASH PROBLEM
Problems
Poor soil
removal
Solutions & Preventive Measures
Possible Causes
?
Not
?
Wash water
enough detergent
?
?
the washer
?
Overloading
?
Incorrect wash
Use
?
Reduce load size.
?
Wash with Jean
Do not
soil type.
?
?
Undiluted fabric softener
dispensed directly
onto
?
?
fabric
page 7.
Rub the stain with bar soap. Wash.
Do not overfill fabric softener
liquid
fabric softener
See page 10 for
?
Black or gray
marks on
clothes
Yellow or
brown rust
stains
A
buildup
caused
by
the
?
interaction of fabric
softener and
detergent
can
flake off and mark clothes
?
Not
enough detergent
?
Iron
or
water
or
manganese in
supply,
water
?
?
?
?
Residue
or
detergent
Incorrect
sorting
Tissues left in pocket
Overloading the washer
?
Overloading
?
Undissolved
?
Use too
the washer
detergent
much detergent
?
Use correct amount of detergent for load
?
To restore discolored load of whites,
Install
nonprecipitating
?
Before
?
Wash lint
Incorrect
use
of chlorine
?
?
Unfastened
zippers,
hooks, buckles
Ribs, tears and broken
?
Overloading
Degradation
givers
eg
of fabric
remover
safe
or an
iron filter in
an
towels, flannelette sheets, separately
synthetic fabrics and remove tissues
sorting and caring
pockets
before loading.
?
Do not overload the washer
?
Do not overload the washer.
?
?
Some detergents need to be pre-dissolved, check the
detergent instructions. Try pre-dissolving the detergent.
Increase water temperature using hot water safe for fabric.
Use proper amount of detergent.
Never pour chlorine bleach
See page 9 for
?
Fasten
?
Remove
directly on fabric.
adding liquid bleach.
zippers, hooks,
objects
in
and buckles.
pockets.
loading.
the washer
rust
before wash. See page 7 for
threads
?
use
water softener
system for
from lint collectors eg
bleach.
snags
amount of soil
supply
ongoing problem.
washing, run water for a few minutes to clear lines.
?
?
Holes, tears,
size,
for fabric.
?
or
instructions.
Keep the recommendations against Scrud(waxy buildup).
(refer to scrud page10.)
your water
Lint
directly
more
dispenser and do not pour
onto fabric.
and water hardness.
pipes,
water heater
required according to
(refer to page 8)
or Soak(Turbo) & Jean wash cycle for
heavy soiled laundry.
Separate heavily soiled items from lightly soiled ones.
Pretreat stain and heavy soil according to directions shown
on
Blue Stains
amount of
hot water for normal soil.
pretreat stain
Incorrect
?
?
warm or
Different water temperature may be
cycle
sorting
?
size,
soil and water hardness.
temperature
too low.
Use correct amount of detergent for load
?
Do not overload the washer.
See page 7 for
caring before
in
28
T roubleshooting
Before
Troubleshting
calling for
Error
Symptom
Water
Supply
service check the
Failure
problem against
Message
the list belows.
Check up
.
.
Is the water tap shut off?
Is the water supply cut off ?
.
Is the tap
.
Is the water pressure low
valve
.
or
water
supply hose frozen
or
?
is the filter of the inlet
clogged with impurities?
Is Hot/Cold selected to Hot when the hose connected
is Cold?
.
Drainage
Failure
Is the Cold hose connected to Hot?
.
Is the drain hose
.
Is the drain hose bent
.
Is the internal part of the hose
positioned correctly?
or placed too high?
(only pump model) clogged
.
Spin
Failure
Door(Lid) Open
Internal sensing
failure
Power failure
Overflow failure
or
with
drain pump
impurities?
Check if electric power has gone off.
.
Is the
laundry evenly balanced?
.
Is the
washing machine placed on a flat surface?
.
Is the lid closed?
.
Please call your nearest LG Electronics service center
for help.
29
Specification
Specifaton
H
D
W
Model
WF-T7001(~6)PC(H/P/D/E/F),WF-T7011(~6)PC(H/P/D/E/F)
WF-T8001(~6)TC(H/P/D/E/F),WF-T8011(~6)TC(H/P/D/E/F)
WF-T9001(~6)TC(H/P/D/E/F),WF-T9011(~6)TC(H/P/D/E/F)
Weight
42
Size
590(W)x606(D)x928(H) WF-T7001(~6),T8001(~6),WF-T9001(~6)
kg
590(W)x606(D)x958(H) WF-T7011(~6),T8011(~6),WF-T9011(~6)
Water tab pressure
30 -800 kPa (0.3 -8
kgf /cm2)
M
emo
P/No.: 3828EA3003R
Download PDF