LCD TV OWNER'S MANUAL MODELS: 15LC1R * 20LC1R * 23LC1R * Please read Information Manual included together before reading this manual and operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote require service. this information to your dealer when you P/NO : 38289U0018G (0601-REV02) Printed in Korea Contents 3 Installation How to join the product assembly to the wall to protect the set tumbling 5 Location and function of controls Remote control handset Battery installation / Front/ Rear 6 Basic operation On and off / Programme selection Volume adjustment / Quick view Mute function On screen language selection 10 On 11 screen menus Menu selection Setting 12 Picture adjustment PSM (Picture Status CSM (Colour Status Picture adjustment 17 up TV stations Auto programme tuning Manual programme tuning Programme edit Favourite programme Calling the programme table Sound Memory) Memory) 18 adjustment SSM (Sound Status Memory) Sound adjustment / Stereo/ Dual NICAM reception reception Time Menu Clock / On/Off time Auto sleep / Sleep timer 20 Other functions 22 TV, AV and PC modes Child lock / Power indicator Teletext Switch on/off SIMPLE text / TOP text FASTEXT / Special teletext functions 24 Connection of external 26 equipment Aerial socket Audio/Video in sockets / S-Video/Audio in sockets DVD input sockets / Headphone socket (S-Video) DTV in sockets Connection of PC 28 PC in socket (15/23LC1R * ) PC Setup (15/23LC1R * ) Picture format (23LC1R * only) Troubleshooting Product 2 check list Specifications 31 32 Installation Unfolding the stand base 1. Place the set with its front facing downward on a cushion 2. Hold down the release button inside the stand and or soft cloth. strongly pull out the stand with your two hands. Note: Here shown may be somewhat different from your set. The stand won't move if you don't press release button. Wall Mount: Horizontal installation < 20LC1R * only > 2-Ring 4 inches spacers 4 inches Place the 4 inches ring spacers on the set before installing the mounting bracket so that the inclination of the backside of the set can be adjusted perpendicularly. wall 4 inches 4 inches For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. Desktop Pedestal Installation 4 inches 4 inches 4 inches 4 inches For proper ventilation, allow the wall. a clearance of 4" on each side and from 3 Installation Connection of TV 1. Connect the aerial cable to the socket marked +75 Ω on the back. For the best reception an outdoor aerial should be used. 2. To connect an additional equipment, see the Connection of external equipment section. 3. Connect the power cord. Note: Here shown may be somewhat different from your set. () Positioning your display Adjust ? the position of the panel in various ways for maximum comfort. Tilt range 12 Be careful that your hands are not down when tilting the screen. pressed Location Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the back of the TV. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. 4 How to wall join the product assembly to the wall set tumbling protect the set Please set it up carefully Set it up close to the wall so the The instructions shown below is when it is the product so the doesn't fall product over when it is doesn't fall pushed to over. backwards. safer way to set up the product, which is to fix it on the wall so the product doesn't fall over in the forward direction. It will prevent the product from falling forward and hurting people. It will also prevent pulled product from damage a caused by fall. Please make sure that children don't climb on or hang from the product. Accessories / 15LC1R * 2-TV Bracket Bolts 1-TV Bracket, 2-Wall Bracket 2-TV The Product Back Side Brackets, 2-Wall Bracket The Product Back Side 3 1 2 15LC1R * product to the wall as shown in the picture. (not provided as parts of the product, must purchase separately) on Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. so it becomes horizontal between the wall and the product. 15LC1R * 1. Use the bracket and the bolt to fix the 2. Secure the bracket with the bolt the wall. 3. It is safer to tie the rope Notes ? When ? Use ? To moving the product to another place undo the ropes first. product holder or a cabinet that is big and strong enough for the size and weight of the product. use the product safely make sure that the height of the bracket that is mounted on the wall is same a as that of the product. 5 Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be panel 10 MUTE operate this adjusted with the buttons the remote control handset Only on supplied the top will set. POWER 1 11 TV INPUT Remote control handset I/II 2 12 LIST Q.VIEW MENU 3 13 4 Before you use the remote control handset, batteries. See the next page. 1. PR 5 of the set. OK VOL MUTE switches the sound on or please install the off. VOL 2. PR TV returns to the TV mode. clears the 123 6 8 from the from on screen. standby. 456 3. SSM 0 SLEEP ARC LIST the programme table. displays 789 7 menu switches the set PSM 14 4. Q.VIEW returns to the TEXT 9 selects 15 UPDATE TIME SIZE MIX HOLD REVEAL 5. viewed programme. D / E (Programme Up/Down) selects a programme or a menu item. on from standby. (Volume Down/Up) adjusts the volume. adjusts menu settings. F / G MODE i previously favourite programme. switches the set ? INDEX a M OK accepts your selection 6. (With TELETEXT/ARC) 7. or NUMBER BUTTONS switches the set on from SSM the current mode. displays standby and selects (Sound Status Memory) preferred sound setting. recalls your 8. 789 SSM 0 ARC select your desired picture format. PSM 9. SLEEP TEXT UPDATE TIME SIZE MIX HOLD REVEAL SLEEP sets the sleep timer. 10. INPUT ? (Without ARC) (With TELETEXT) 6 selects the remote operating mode. a programme. Location and function of controls 11. POWER switches the set on from standby or off to standby. 10 12. I/II selects the MUTE language during dual language 1 broadcast. I/II a menu. 13 4 Memory) picture setting. PR 5 OK VOL VOL PR 123 No function COLOURED BUTTONS models) Q.VIEW MENU 3 15. TELETEXT BUTTONS These buttons are used for teletext. For further details, see the 'Teletext' section. TELETEXT 12 LIST 14. PSM (Picture Status recalls your preferred or : These buttons are used for teletext (only 6 programme edit. 456 789 7 Battery INPUT 2 selects : 11 TV 13. MENU * POWER installation 8 SSM 0 PSM 14 SLEEP 9 The remote control handset is powered by two AAA/Alkaline type batteries. To load the batteries, turn the remote control handset over and open the battery compartment. Install two batteries the as indicated polarity symbols ( marked inside the + and by ) - compartment. Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. (Without TELETEXT/ARC) SSM 0 SLEEP ARC PSM (With ARC) (Without TELETEXT) 7 Location and function of controls Front Top panel PR VOL OK MENU INPUT /I 7 6 5 432 1 8 1. ON/OFF( 6. /I) switches the set on from standby or INPUT selects the remote 3. a programme or a menu item. switches the set on from standby. OK or displays mode. 5. 8 F / G REMOTE CONTROL SENSOR 8. POWER/STANDBY INDICATOR illuminates orange in standby mode. illuminates blue when the set is switched a menu. accepts your selection 7. mode. MENU selects 4. operating (Programme Down/Up) selects off to standby. 2. E / D (Volume Down/Up) adjusts the volume. adjusts menu settings. the current on. Location and function of controls Rear 23LC1R * only AV2 R AUDIO AUDIO INPUT L VIDEO VIDEO INPUT PC SOUND ANTENNA INPUT 23LC1R * INPUT PC INPUTJACK PC INPUT ANTIN( 75 ) PC SOUND AC INPUT H/P S-VIDEO AV1 AC INPUT COMPONENT (DVD/DTV IN) ((480i/480p/576i/576p), Audio) 20LC1R * AUDIO/VIDEO S-VIDEO HEADPHONE INPUT INPUT JACK FOR SERVICE ANTENNA JACK INPUT FOR SERVICE ANTIN( 75 ) AC INPUT H/P S-VIDEO AV AC INPUT COMPONENT (DVD/DTV IN) ((480i/480p/576i/576p), Audio) AUDIO/VIDEO S-VIDEO HEADPHONE INPUT INPUT JACK ANTENNA INPUT 15LC1R * PC SOUND INPUT PC INPUTJACK PC INPUT ANTIN( 75 ) PC SOUND AC INPUT H/P AV AC INPUT COMPONENT (DVD/DTV IN) ((480i/480p/576i/576p), Audio) S-VIDEO AUDIO/VIDEO S-VIDEO HEADPHONE INPUT INPUT JACK 9 Basic operation On and off Press the 1. switch it 3. Note POWER : If, while the INPUT TV, INPUT , or NUMBER buttons to set is switched on, the mains ed the set will switch to replaced TV D / E fully. Press the POWER button. The set reverts to Pull out mains plugs to switch the set off. 2. MUTE POWER, on standby or power in the mains power socket. on standby plug mode. is disconnect- when the mains plug is I/II Programme selection You a Q.VIEW MENU can select programme number with the D / E or NUMBER buttons. PR Volume OK VOL VOL adjustment Press the F / G button to PR adjust the volume. Quick view 123 Press the Q.VIEW button to view the last programme you 456 789 SSM 0 were watching. Mute function Press the MUTE button. The sound is switched off and the display appears. You can cancel it button. On screen The menu can language be First select your 1. 3. the MUTE, F / G, I/II,orSSM selection displayed language. on the screen in your desired Press the MENU button and then D / E SPECIAL 2. by pressing language. button to select the menu. Press the G button and then D / E button to select Language. Press the G button and then D / E button to select your desired language. All the 10 on screen displays will appear in the selected 4. Press the OK button. 5. Press the TV button to return to normal TV viewing. language. On screen menus Menu selection Press the MENU button and then D / E button to display each menu. Press the G button and then D / E button to select a menu item. 1. 2. the setting of an item in the sub or pull-down menu with F/G button. You can move to the higher level menu by pressing the OK button and to move to the lower level menu by pressing the MENU button. Note : a. In the PC mode, the SCREEN (20LC1R * ) menu is not dis- 3. Change played. b. In the teletext mode, menus are not displayed. STATION MENU PICTURE Auto programme PSM Manual programme CSM Programme edit Contrast Favourite programme Brightness PR OK Colour VOL Sharpness VOL PR D E MENU FG D OK E STATION MENU FG OK PICTURE menu menu SOUND SCREEN SSM * ARC AVL Auto configure Manual configure Balance Reset D E D MENU FG E OK SCREEN * : Clock Off time Input Child lock On time Power indicator Auto MENU FG menu TIME Language E OK SOUND 23LC1R * SPECIAL D MENU FG menu D OK SPECIAL E menu sleep MENU FG OK TIME menu 11 TV stations Setting up STATION Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. Auto programme Manual programme Programme edit Favourite programme Auto programme D E MENU FG tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. OK 1. 2. Press the MENU button and then D / E button to select the STATION menu. Press the G button and then D / E button to select Auto programme. Auto programme TV System BG Storage from I Search DK M MENU D E PR 3. OK VOL VOL PR 123 4. 5. 6. 456 789 7. 8. 0 MENU FG OK Press the G button. Select a TV system with the G button and then D / E button on the System menu; BG : PAL B/G, SECAM B/G (Europe/East Europe) I : PAL I/II (U.K./Ireland) DK : PAL D/K, SECAM D/K (East Europe) M : (USA/Korea/Philippines) Press the OK button. Press the D / E button to select Storage from. Select the beginning programme number with the F / G button or NUMBER buttons on the Storage from pull-down menu. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5. Press the D / E button to select Search. Press the G button to begin auto programming. Auto programme System Auto programme Storage from Search To start C21 BG 2 5% MENU : Stop MENU All receivable stations are stored. Option: In Australia, if no station name can be assigned to a folstation, the channel number is assigned and stored as ----- lowed number see by the station name. assign a 'Assigning a station name' section to To stop auto programming, press the MENU button. When auto programming is completed, the Programme edit menu appears on the screen. See the 'Programme edit' section to edit the stored programme. 9. 12 Press the TV button to return to normal TV viewing. Setting up Manual programme TV stations STATION tuning Auto programme Manual programme Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1. Press the MENU button and then D / E button to select the STATION menu. 2. Press the G button and then D / E button to select Manual 3. programme. Press the G button and then D / E button to select Programme edit Favourite programme D E MENU FG OK Storage. Manual programme 29 Storage System Channel Fine TV Search Name MENU D E 4. MENU FG OK Select the desired programme number (0 to button or NUMBER buttons on the Storage under 10 is entered with 5. 6. a 99) with the F / G Any number menu. numeric '0' in front of it, i.e. '05' for 5. Press the D / E button to select System. Select a TV system with the G button and then F / G button the System menu; BG I : DK : M : : PAL B/G, SECAM B/G PAL I/II (U.K./Ireland) OK on VOL VOL PR (Europe/East Europe) PAL D/K, SECAM D/K (East Europe) (USA/Korea/Philippines) 123 7. Press the OK button. 8. Press the D / E button to select Channel. Press the G button and then D / E button to select VHF/UHF Cable on the Channel menu. 9. PR If possible, select the channel number directly buttons. Any number under 10 is entered with 456 or with the number a numeric '0' 789 in 0 front of it, i.e. '05' for 5. 10. Press the OK button. 11. Press the D / E button to select Fine. 12. Use the F / G buttons to adjust frequency on your TV. 13. Press the OK button to store it. 14. Press the D / E button to select Search. 15. Press the G button and then F/G button to the Search ing on will stop. pull-down menu. If a commence search- station is found the search Manual programme Storage System Channel Fine FG Search Name D E MENU FG OK 16. Press the OK button to store it. 17. To store another station, repeat steps 3 to 13. 18. Press the TV button to return to normal TV viewing. 13 Setting up Assigning a station name 1. Repeat the 'Manual programme tuning' steps STATION Auto programme Manual programme 2. Programme edit 3. Favourite programme E MENU FG 1 to 2. Press the G button and then D / E button to select Name. Press the G button and then use the D / E You can use a blank, . +, D TV stations -,thenumber0to9andthealphabetAtoZ. + A~Za~z0~9?!#- OK :blank TV MENU PR OK VOL VOL PR 14 4. With the F button you can select in the opposite direction. Select the position by pressing the F / G button and then make 5. your choice of the second character, and Press the OK button to store it. 6. Press the TV button to return to normal TV so on. viewing. Setting up Programme TV stations STATION edit Auto programme This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. Press the MENU button and then D / E button to select the STATION menu. 2. Press the G button and then D / E button to select edit. Programme 3. Press the G button to menu. display the Programme edit Manual programme Programme edit Favourite programme D E MENU FG OK Programme edit 0C0 35S 6S17 2C1 2 7----- 3S6 6 8----- 4S6 7 9----- Delete E 1. 2. a Select MENU FG TV Copy Move D Deleting 69 1BLN03 Skip MENU OK programme programme to be deleted with the D / E orF/Gbutton. a Press the RED button twice. The selected programme is deleted, all the programmes are shifted up one position. following PR OK Programme edit VOL 0C0 35S 69 1BLN03 6S17 2C1 2 7----- 3S6 6 8----- 4S6 7 9----- VOL PR 123 Delete D E Copying a MENU FG programme programme to be 1. Select 2. Press the GREEN button. All the Moving 1. a following 456 OK copied programmes with the D / E orF/Gbutton. are shifted down one position. 0 a programme Select a programme to be moved with the D / E orF/Gbutton. 2. Press the YELLOW button. 3. Move the programme to the desired programme number with the D / E or F / G button. 4. Press the YELLOW button Skipping 1. 789 Select a a again programme number programme number to be to release this function. skipped with the D / E orF/G button. 2. 3. Press the BLUE button. The skipped Press the BLUE button to release the programme turns to blue. skipped programme. When a programme number is skipped it means that you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. again Press the TV button to return to normal TV viewing. 15 Setting up STATION Favourite programme Auto programme This function lets you select your favourite programmes Manual programme Programme edit Favourite programme D E TV stations directly. 1. Press the MENU button and then D / E button to select the STATION menu. 2. Press the G button and then D / E to select Favourite programme. MENU FG OK Favourite programme On D E 3. TV 4. 5. LIST Q.VIEW MENU 6. 7. ----- -- ----- -- ----- -- ----- -- ----- -- ----- -- ----- MENU FG OK -- or Off. ----- . the YELLOW button to select stored favourite programmes. OK VOL ----- -- Press the G button and then F / G button to select On Press the D / E button to select Select a desired programme with the F / G button. To store another programme, repeat steps 4 to 5. You can store up to 8 programmes. Press the TV button to return to normal TV viewing. Repeatedly press PR -- VOL PR Calling the programme table You can check the programmes stored in the memory the programme table. 123 456 Displaying programme table Press the LIST button to display the by displaying Programme table menu. The programme table appears on the screen. One programme table contains ten programmes as below. 789 0C0 35S 0 6S17 2C12 7S22 3S66 8C09 4S67 9C11 D E Note a. b. 69 1BLN03 MENU FG OK : You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. Some programmes with the channel number shown in the programme table indicate there is no station name assigned. Selecting Select a programme in the programme table programme with the D / E Then press the OK button. a or F / G button. The set switches to the chosen programme number. Paging through There are a programme table 10 programme table pages in which contain 100 programmes. Pressing the D / E or F / G button repeatedly Press the TV button to return to normal TV 16 turns the pages. viewing. Picture PSM adjustment PICTURE (Picture Status Memory) PSM 1. Press the MENU button and then D / E PICTURE menu. 2. Press the G button and then D / E button to select PSM. 3. the PSM on CSM Contrast Press the G button and then D / E button to select ting 4. button to select the a Brightness Colour picture set- Sharpness menu. D Press the OK button. E MENU FG OK PICTURE PSM Dynamic CSM Standard Contrast Mild Brightness Game Colour User Sharpness D MENU FG E 5. OK TV Press the TV button to return to normal TV viewing. MENU picture (Dynamic, Standard, Mild, on the remote control. The picture User) Dynamic, Standard, Mild and Game are programmed for optimum picture reproduction at the factory and cannot be changed. You also recall can a desired with PSM button Game or CSM (Colour Status Memory) PR Selecting a factory setting OK VOL colour set. VOL PR 1. Press the MENU button and then D / E PICTURE 2. 3. button to select the menu. Press the G button and then D / E button to select CSM. Press the G button and then D / E button to select a color set- ting on the CSM menu: Cool, Normal, Warm or User (Red, Green, Blue). 4. Press the OK button. 5. Press the TV button to return to normal TV Picture You adjustment PSM adjust picture contrast, brightness, sharpness to the levels you prefer. 1. viewing. can colour Press the MENU button and then D / E PICTURE menu. intensity, button to select the PICTURE PSM CSM Contrast 47 Contrast Brightness D E Colour D Sharpness E MENU FG Contrast 85 F OK 3. Press the D / E button to select the desired Press the F / G button to make appropriate 4. Press the TV button to return to normal TV 2. G picture item. adjustments. viewing. 17 Sound SOUND SSM AVL SSM (Sound Status Memory) You select your preferred sound setting; Flat, Music, Movie or and you can also adjust the sound frequency of the equalizer. can Sports Balance adjustment 1. Press the MENU button and then D / E button to select the SOUND menu. SOUND D E MENU FG OK SSM Flat AVL Music Balance Movie Sports G User D E 2. 3. TV MENU FG OK Press the G button and then D / E button to select SSM. Press the G button and then D / E button to select a sound setting on Sound the SSM menu. Frequency Adjustment Press the OK button in User. b. Select a sound band by pressing the F / G button. c. Make appropriate sound level with the D / E button. d. Press the OK button to store it for the sound User. a. MENU PR OK VOL VOL PR 0.1 0.3 1 3 8 Khz D E MENU FG OK Press the TV button to return to normal TV You viewing. also recall a desired sound setting (Flat, Music, Movie, Sports or User) with SSM button on the remote control. The sound settings Flat, Music, Movie and Sports are programmed for optimum sound reproduction at the factory and cannot be changed. can If you press the SSM button after making appropriate on the User sub menu, the display User automatically appears even though you have already set a factory preset set- Note : adjustment SSM ting; SOUND SSM D E AVL On Balance Off MENU FG OK Flat, Music, Movie or Sports. Sound adjustment You AVL adjust balance, AVL (Auto Volume Leveler). automatically keeps on an equal volume level change programmes. 1. 2. 3. can if you Press the MENU button and then D / E button to select the SOUND menu. Press the G button and then D / E button to select the desired sound item; AVL or Balance. Make desired adjustment with the F / G, D / E and then press the OK button. 18 even Sound - adjustment This feature is not available in all countries. Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Display I/II Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again. selection for dual language broadcast programme is received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly. DUAL I sends the primary broadcast language to the loudspeakers. DUAL II sends the secondary broadcast language to the Language If OK a loudspeakers. DUAL I+II sends NICAM a separate language equipped with the receiver for NICAM NICAM Instantaneous high quality Multiplex) digital output broadcast 1. 2. as (Near follows by pressing mono the I/II button is received, you can type of received repeatedly. select NICAM MONO FM MONO. When NICAM stereo is received, you STEREO or FM MONO. If the stereo FM mono. 3. reception, the Companding Audio sound can be received. can be selected according to the When NICAM or loudspeaker. reception If your set is Sound to each can signal select NICAM is weak, switch to When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected the display MONO appears on the screen. 19 TIME Menu Clock TIME Clock You must set the time Off time correctly before using on/off time function. On time Auto 1. sleep Press the MENU button and then D/E TIME 2. D E button to select the menu. Press the G button and then D / E button to select Clock. Time MENU FG OK Clock -i-i:i-i- Off time On time Auto D E sleep MENU FG OK 3. Press the G button and then D/E button to 4. Press the G button and then D/E button to 5. Press the MENU button to adjust the hour. adjust the minute. save. MENU On/Off time The off timer PR 1. OK VOL switches the set to Press the MENU button and then D/E TIME VOL PR automatically standby at the preset time. 2. button to select the menu. Press the G button and then D / E button to select Off time or On time. 3. Press the G button and then D / E button to select On. function, press the D/E button to To cancel On/Off time select Off. Time Clock Off time On time Auto -i-i:i-i- sleep Pr. Vol. 0 30 On D E MENU FG OK 5. Press the G button and then D / E button to adjust the hour. Press the G button and then D / E button to adjust the minute. 6. Only 4. 7. Press the MENU button to Note a. b. function; Press the G button and then D/E adjust volume level and programe number. On time button to : In the event of power interruption failure), the clock must be reset. automatically switch has been pressed. Once the the d. 20 on or back to or power on by the on time function it standby mode unless a button off time is set, these functions operate daily at preset time. Off Timer function overrides On Timer function if the e. (disconnection Two hours after the set is switched will c. save. same they are set to time. The set must be in standby mode for the On Timer to work. TIME Menu Auto TIME sleep Clock Off time If you select On on the Auto sleep menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1. Press the MENU button and then D/E TIME 2. 3. button to select the On time Auto D E menu. sleep MENU FG OK Press the G button and then D/E button to select Auto sleep. Press the G button and then D / E button to select On or Off. Time Clock Off time On time Auto sleep On Off D MENU FG E 4. OK MENU Press the MENU button to Sleep save. timer PR You don't have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the OK VOL VOL PR preset time has elapsed. Press the SLEEP button to select the number of minutes. The display Min' will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down ' --- from the number of minutes selected. Note : a. To view the remaining sleep time, press the SLEEP button once. b. To cancel the until the c. sleep time, repeatedly press Min' appears. display the SLEEP button ' --- When you switch the set off, the set releases the time. preset sleep SLEEP 21 Other functions SPECIAL TV, Language Input Inputs can be set for TV, AV or PC mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Child lock Power indicator D E MENU FG AV and PC modes Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. OK 1. 2. 3. Press the MENU button and then D / E button to select the SPECIAL menu. Press the G button and then D / E button to select Input. Press the G button and then D / E button to select TV, AV (or AV1), AV2, RGB-DTV, RGB-PC or Component mode. The AV and PC modes are : TV SPECIAL 15LC1R * Language MENU Input TV Child lock AV Power indicator Component RGB-DTV RGB-PC PR D E OK VOL MENU FG OK SPECIAL 20LC1R * VOL Language PR D E Input TV Child lock AV Power indicator Component MENU FG OK SPECIAL 23LC1R * Language Input TV Child lock AV1 Power indicator AV2 Component RGB-DTV RGB-PC D E MENU FG OK AV (or AV 1) : VCR connected to the AV socket of the set. AV 2 : VCR connected to the AV socket on the side of the set. (23LC1R * ) RGB-DTV RGB-PC : SET TOP connected to the PC INPUT and PC SOUND socket of the set. (15/23LC1R * ) PERSONAL COMPUTER connected to the PC socket of the set. (15/23LC1R * ) : Component : DVD connected to the COMPONENT sockets on the back of set. 4. Press the TV button to return to normal TV Alternatively you INPUT button. can select the TV or viewing. AV mode by pressing In AV mode, to return to TV mode, press the TV buttons. 22 the Other functions SETUP Child lock Language The TV can be set so Input that the remote control handset is needed to control it. This feature can be used to Child lock prevent unauthorized view- Power indicator ing. 1. Press the MENU button and then D / E button to select the SPECIAL 2. 3. D menu. E MENU FG OK Press the G button and then D / E button to select Child lock. Press the G button and then D / E button to select On or Off on the Child lock menu. SPECIAL Language Input Child lock On Power indicator Off TV D E 4. MENU FG MENU OK Press the TV button to return to normal TV viewing. With the lock on, the display Child lock on appears on the screen if any button on the top panel is pressed while viewing the TV. PR OK VOL Power indicator VOL PR Use this function to set the power indicator on the front side of the set On at any time, the power indicator product to On or Off. If you will automatically be turned 1. on. Press the MENU button and then D / E button to select the SPECIAL menu. 3. Press the G button and then D / E button to select Power indicator. Press the G button and then D / E button to select On or Off on the Power indicator menu. 4. Press the TV button to return to normal TV 2. viewing. SPECIAL Language Input Child lock Power indicator On Off D E MENU FG OK 23 Teletext - This feature is not available in all countries. Teletext is an optional function, therefore only a set with the telereceive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-theminute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. text (or TOP text) system can Switch on/off Press the TEXT button to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT button to switch off teletext. The previous mode reappears. PR OK PR SIMPLE text selection Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The D / E button can be used to select the preceding or following page. Page 1. 123 456 2. a colour button in LIST mode If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the ton to switch to LIST mode. Programming 789 M but- 0 TEXT UPDATE TIME SIZE MIX HOLD REVEAL INDEX MODE ? i Four teletext page numbers of your choice can be colour coded and easily selected by pressing the corresponding coloured button on the remote control handset. 1. Press a coloured button. 2. Using the NUMBER buttons, select the page you wish to programme. 3. Press the OK button. Then the selected page is stored as the selected page number by blinking once. From now on, you can select this page with the same coloured button. 4. The three other coloured buttons are programmed in this way. M TOP text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. Block / group / page selection 1. 2. 3. 4. 24 With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the D button can be used. The red button permits to return to previous selection. Alternatively the E button can be used. Teletext Direct page selection Corresponding to the SIMPLE teletext mode, you ber using the NUMBER buttons in TOP mode. can select a page by entering it as a three digit num- FASTEXT The teletext pages are colour coded corresponding coloured button. along the bottom of the selection i Press the button to select the index page. You can select the pages which are colour coded screen and are selected by pressing the Page 1. 2. along the bottom line with the same coloured but- tons. 3. 4. to the SIMPLE teletext mode, you can select a page by entering its three number with the NUMBER buttons in FASTEXT mode. The D / E button can be used to select the preceding or following page. Corresponding Special ? digit page teletext functions REVEAL Press this button to display concealed information, such as solutions of riddles Press this button again to remove the information from the display. or puzzles. SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. UPDATE Displays the display TV on the screen while waiting for the new teletext page. will appear at the top left hand corner of the screen. When the is available then display will change to the page number. Press this button to view the updated teletext page. picture The updated page HOLD the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited. To continue press this button again. Stops MIX Displays the teletext pages superimposed on the TV To switch the TV picture off press this button again. picture. TIME When viewing a TV programme, press this button to display the time at the top left hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, D / E or NUMBER buttons. Press again to exit this function. 25 Connection of external equipment You can connect additional equipment, such etc. to your set. Examples are shown below. (- This as VCRs, camcorders part of Connection of external equipment mainly tures for the 23LC1R * .) use pic- Aerial socket PC INPUT ANTIN( 75 ) PC SOUND 1. H/P S-VIDEO AV1 2. 3. 4. VCR 5. Connect the RF out socket of the VCR to the aerial socket of the set. Connect the aerial cable to the RF aerial in socket of the VCR. Store the VCR channel on a desired programme number using the 'Manual programme tuning' section. Select the programme number where the VCR channel is stored. Press the PLAY button on the VCR. Audio/Video in sockets PC INPUT ANTIN( 75 ) PC SOUND 1. H/P S-VIDEO AV 2. 3. VCR Note : If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO socket of the set. S-Video/Audio in sockets AV2 R AUDIO Connect the audio/video out sockets of the VCR to audio/video in sockets of the set. Press the INPUT button to select AV(or AV1) or AV2. Press the PLAY button on the VCR. The VCR playback picture appears on the screen. When connecting picture quality will L VIDEO 1. an (S-Video) S-VIDEO VCR to the S-VIDEO socket, the be further improved. Connect the S-Video socket of the VCR to the S-VIDEO socket of the set. VCR 2. Connect the audio cable from the S-VIDEO VCR to the AUDIO sockets of the set. 3. Press the INPUT button to select 4. Press the PLAY button The VCR PC INPUT ANTIN( 75 ) PC SOUND H/P AV1 S-VIDEO VCR 26 S-VIDEO on playback picture AV(or AV1). the VCR. appears on the screen. Connection of external DVD 1. input equipment sockets Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y (DVD/DTV) sock- Y PB PR) of the DVD to the COMPONENT ets (Y PB PR) of the set. or 2. Connect the audio cable from the (DVD/DTV)/ AUDIO to AV1 COMPONENT sockets of the set. 3. Press the INPUT button to select 4. Press the PLAY button The DVD DVD PC IN on playback picture Component. the DVD. appears DVD on the screen. DTV in sockets PCI 1. Connect the SET TOP outputs to the COMPONENT (DVD/DTV) sockets (Y PB PR) on the set. (or, connect the SET TOP with the output socket to PC INPUT socket cable of the SET TOP to the PC SOUND. D-Sub on AV1 the set and audio (15/23LC1R * )) 2. Connect the audio cable from the SET TOP to COMPONENT/ AUDIO sockets of the set. 3. Press the INPUT button to select Component or DTV Reciever RGB-DTV (15/23LC1R ). * PC INPUT Headphone Insert the can socket ANTIN( 75 ) PC SOUND H/P S-VIDEO AV1 headphone plug to the headphone socket of the set. You through the headphone. To adjust the head- listen to the sound press the F / G button. If you press the MUTE butthe sound from the headphone is switched off. ton, phone volume, DTV Reciever PC INPUT ANTIN( 75 ) PC SOUND H/P AV1 S-VIDEO 27 Connection of PC PC in socket PC INPUT ANTIN( 75 ) Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. Connect the audio cable from the PC to the PC SOUND sockets of the set. Press the INPUT button to select RGB-PC. Switch on the PC, and the PC screen appears on the set. The set can be operated as the PC monitor. 1. H/P S-VIDEO AV1 2. 3. 4. PERSONAL COMPUTER Displayable MODE VGA Monitor Resolution Specification Horizontal Vertical Frequency(kHz) Frequency(Hz) 640x480 31.4 60 800x600 35.1 56 800x600 37.8 60 XGA 1024x768 48.3 60 WXGA 1360x768 47.6 60 SVGA form (Synchronization input Note a. (15/23LC1R * ) PC SOUND : 23" only separate) : If the set is cold, there may be nothing wrong with the set. a small "flicker" when the set is switched on. This is normal, there is b. If possible, use the VESA 1024x768@60Hz (15") / 1360x768@60Hz (23") video mode to obtain the best image quality for your LCD monitor. If used under the other resolutions, some scaled or processed pictures may appear on the screen. The 1024x768@60Hz (15") / 1360x768@60Hz (23"). c. set has been Some dot defects may appear on the screen, like Red, Green impact or effect on the monitor performance. or pre-adjusted Blue to the mode VESA spots. However, this will have no d. Do not press the LCD screen with your distortion effects on the screen. e. When the PC will differ f. screen according appears (Display Power range" 28 a as this may produce some temporary message may appear on the screen, and the message a message appears click "Next" until the on the screen, adjust the PC as in the 'Displayable Monitor mode saving mode, automatically supplied signal time system version. If appears Management) When the PC is in the power energy. Note : Use the the set, to the Window message finishes. If the message "out of Specification' section. DPM on finger for a long the monitor goes into DPM mode to cable with the set. Otherwise, DPM mode may not work. save the Connection of PC SCREEN ARC PC Setup (15/23LC1R * ) You can * Auto configure configure Manual Reset 1. D E 2. MENU FG OK * : adjust auto configure, manual configure and reset as you prefer. 23LC1R * only 3. Press the INPUT button and then D / E button to select the RGB-PC. Press the MENU button and then D / E button to select the SCREEN menu. Press the G button and then D / E button to select the desired screen function. SCREEN ARC * Auto configure configure To start Manual Reset INPUT D MENU E 4. OK Make appropriate adjustments. Auto configure This function is for the automatic adjustment of the screen position, clock and phase. The displayed image will disappear for a few seconds while the Auto-configuration is in progress. PR OK VOL MENU FG VOL Manual PR configure This function is for the manual adjustment of the screen position, clock and phase. Press the F / G button to make appro- priate adjustments. H-Position / V-Position This function is to adjust picture to ? prefer. ? left/right and up/down as you Clock This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. ? Reset This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed. Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and phase manually. 5. Press the OK button to store it for the PC monitor picture. 29 Connection of PC Picture format You (23LC1R * only) watch TV in various can picture formats; Full, 16:9, 14:9, Zoom, Spectacle, Original, 4:3. press the ARC button to select your desired Repeatedly picture format. Full When your TV receives the wide screen signal, it will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. (Not available in all countries) 16:9 You can TV MENU 14:9 You can enjoy through the 14:9 mode. The PR the picture format of 14:9 14:9 is viewed screen just like right. or that the general screen TV programme 4:3 is magnified to the upper / lower and left / OK VOL enjoy the cinema (the picture format of 16:9) or general TV programme through the 16:9 mode. The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full. VOL PR Zoom You can The so enjoy screen that the the cinema in 4:3 is magnified screen a vast through screen the Zoom mode. to the upper / lower and left / 16:9 is full. The bottom and right sides top of the picture may be lost. Spectacle When your TV receives the wide adjust the picture horizontally, in entire screen a signal, it will lead proportion, to nonlinear you to fill the screen. Original ARC When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent. (Not available in all countries) 4:3 This picture Note 30 : ARC format is 4 to 3 of menu general TV. is not available in RGB-PC mode. T roubleshooting Checklist Checklist The ? doesn't work Power is suddenly Check to control The remote control does not work operation see if there is any obstruction. object normally. between the product ? Are batteries installed with correct ? Correct remote ? Install new ? Is the sleep ? Check the power control settings. Power interrupted No broadcast on station tuned with Auto off activated. turned off ? and the remote causing operating polarity (+ mode set: to +, - to -)? TV, VCR etc.? batteries. timer set? The video function does not work. No picture & No sound Check whether the ? Try ? Is the power cord inserted into wall power outlet? Check your antenna direction and/or location. ? Picture appears slowly after switching ? Test the wall power outlet, plug another product's power cord into the outlet where the product's power cord was plugged in. ? This is or on poor color poor picture normal, the image is muted during the product startup process. Please contact your service center, if the minutes. ? or with the broadcast. ? ? No product is turned on. problem may be another channel. The ? ? ? picture has not appeared after five Adjust Color in menu option. Keep a sufficient distance between the product and the VCR. Try another channel. The problem may be with the broadcast. Are the video cables installed properly? Activate any function to restore the brightness of the picture. Horizontal/vertical bars ture Poor reception some Lines in picshaking on channels or ? Check for local interference such ? Station or ? Station signal ? Check for ? Check antenna or streaks pictures cable is as an electrical product experiencing problems, weak, reorient sources of possible (Change appliance or power tool. tune to another station. antenna to receive weaker station. interference. the direction of the antenna). 31 T roubleshooting Checklist Checklist The audio function does not work. No ? Press the VOL Picture OK & ? Sound muted? Press MUTE button. No sound ? Try ? Are the audio cables installed ? Adjust ? A output from of the one another channel. The Balance in problem may be properly? with the broadcast. option. menu speakers Unusual sound from inside the change in ambient humidity or temperature may result in an unusual product is turned on or off and does not indicate a fault with noise when the product the product. There is signal PC mode range. Vertical bar horizontal ? Adjust resolution, ? Check it whether the ? Check the ? Work the Auto ? Check the ? Reinstall the PC video card. is out of input in PC mode. problem a (Only The button. (or Volume) applied) frequency, or vertical cable is connected signal frequency. or loose. source. or stripe on background & configure or adjust clock, phase, or H/V position. Horizontal Noise & Incorrect position Screen color is unstable or single signal cable. color Product Specifications Specifications Power Power Requirement Consumption Television System Program Coverage External Antenna * The specifications Impedance 15LC1R * : AC100-240V~50/60Hz 0.8A 20LC1R * : AC100-240V~50/60Hz 1.2A 23LC1R * : AC100-240V~50/60Hz 1.4A 15LC1R * : 40W 20LC1R * : 65W 23LC1R * : PAL/SECAM VHF : 120W B/G/D/K, PAL I/II, NTSC-M E2~E12,UHF : E21~E69,CATV:S1~S20,HYPER:S21~S47 75Ω shown above may be changed without prior notice for quality improvement.