LG | 21FX4AG | LG 21FX4AG Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0529A
(MC059A,
124D
and quote this inforservice.
cover
require
TX)
a
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off / Programme selection
7
Volume
adjustment
Quick view / Mute function
On screen language selection
On
(option)
8
screen menus
Menu selection
Setting up
TV stations
9
Auto programme tuning
Manual programme tuning
Programme edit / Favourite programme
Calling the programme table
Picture adjustment
PSM (Picture Status Memory)
CSM (Colour Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option)
15
Sound adjustment (option)
SSM (Sound Status Memory)
17
Sound
adjustment
X-WAVE (Wireless Sound) (option)
Turbo sound selection (option)
Sound output selection (option)
Stereo/Dual reception (option)
NICAM reception (option)
Time
setting
Setting the
Setting the
20
clock
On/Off timer
Auto off
Other functions
TV and AV modes
Child lock / Blue back (option)
Games (option) / Sleep timer
21
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Component in sockets (option)
Headphone socket (option)
23
Troubleshooting
2
check list
Back
cover
Installation
Power
This set
supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
operates
on an
AC mains
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
cause
of the set, this may
place anything containing liquid on top
a fire or could give an electric shock.
Service
Never
remove
the back
high voltage
properly, unplug it
very
of the set
this
expose you to
and other hazards. If the set does not operate
cover
as
can
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation
openings
on
the back
cover.
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions can also be
panel of the set.
adjusted
with the buttons
on
the front
Remote control handset
POWER
MUTE
1
Before you use the remote control
teries. See the next page.
1.
123
456
2
2.
POWER
switches the set
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
789
3.
MENU
0
TV/AV
3
4.
4
EYE/
I/II/
PR
VOL
VOL
OK
PR
on or
off.
(Programme Up/Down)
a
automatically.
F / G (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
LIST
SSM/
()
() /
scans
SLEEP
programmes
OK
7
FAVOURITE
/
accepts your selection
8
PICTURE
TURBO/
or
displays
the current mode.
SOUND
6.
Q.VIEW
returns to the
previously
viewed programme.
PSM
7.
(Picture Status Memory)
recalls your preferred picture setting.
8.
FAVOURITE
selects
9.
a
favourite programme.
TURBO PICTURE / SOUND BUTTON
selects Turbo
4
a
programme or a menu item.
switches the set on from standby.
6
9
select
a menu.
EYE/* (option)
switches the eye function
selects
()
Q.VIEW
PSM
MENU
selects
standby.
()
5.
5
handset, please install the bat-
picture
and sound.
(option)
number.
Location and function of controls
10. MUTE
switches the sound
on or
off.
11. TV/AV
selects TV
or
AV mode.
switches the set
on
from
standby.
12. I/II/*
(option)
selects the language during
selects the sound
dual
language
broadcast.
(option)
POWER
output.
MUTE
10
13. LIST
displays
1
2
3
4
5
6
7
8
9
MENU
0
TV/AV
the programme table.
14. SLEEP
sets the
15. SSM/*
recalls
sleep
timer.
(Sound Status Memory) (option)
your preferred sound setting.
16. SURROUND
11
12
(º/*) (option)
EYE/
selects surround sound.
COLOURED BUTTONS : These buttons
TELETEXT models) or programme edit.
are
used for teletext
(only
VOL
I/II/
PR
VOL
OK
PR
Battery
()
()
Q.VIEW
installation
LIST
13
PSM
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
-
SSM/
SLEEP
FAVOURITE
/
PICTURE
14
15
16
SOUND
TURBO/
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
21FX4R series
AV2
VIDEOL/MN
6
1234
AUDIO
5
8
R
21FB3R series
7
AV
ON/OFF
MENU
OK
VOL
PR
VIDEO L/MONO AUDIO R
VIDEO AUDIO
AV3
1234
7
7
AUDIO
6
6
VIDEO
RAUDIO
5
6
7
6
7
17/21FB7R series
L/MON
VIDEO
AV
AV2
123
Side
1.
4
5
panel
MAIN POWER (ON/OFF)
switches the set on or off.
6.
AUDIO
(AV
or
(or AUDIO) / VIDEO
AV2) (option)
-
L/R
IN SOCKETS
Connect the audio/video out sockets of
2.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in stand-
by
mode.
7.
dims when the set is switched
3.
REMOTE CONTROL SENSOR
8.
5.
a menu.
OK
accepts your selection
rent mode.
F / G (Volume
or
displays
the
Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
selects
programme or a menu item.
switches the set on from standby.
6
a
to these sockets.
HEADPHONE SOCKET
(option)
headphone plug to this
socket.
EYE
(option)
adjusts picture according
to the
surrounding
conditions.
Note : Shown is a simplified representation of
front or side panel. Here shown may be somewhat different from your set.
MENU
selects
equipment
Connect the
on.
Note : Only use the supplied remote control
handset. (When you use others, they'll be
not able to function.)
4.
external
cur-
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV
or NUMBER buttons on the remote control handset to switch it
on
fully.
3.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
4.
Press the main power button
to switch the set off.
again
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the D / E
or
NUMBER
POWER
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
buttons.
MENU
Volume
adjustment
Press the F / G button to
adjust
the volume.
PR
VOL
I/II/
()
VOL
OK
Quick view
PR
Press the Q.VIEW button to view the
were
previous programme
you
()
Q.VIEW
watching.
SSM/
Mute function
SOUND
Press the MUTE button. The sound is switched off and the
display
TURBO/
>
appears.
You can cancel it by pressing the
TURBO SOUND button.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
MUTE,
on
the
F
/
G, SSM/*, I/II/*,
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
Press the G button to select
3.
Press the G button and then D / E button to select your desired
Language.
language.
All the
4.
will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
on screen
displays
viewing.
7
On
screen menus
The
an
between you and your set takes place on screen with
menu. The buttons required for the operating steps are
dialogue
operator
also
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu
item.
Press the G button to display the sub menu or the pull-down
menu.
4.
Change
the
setting
of
an
item in the sub
or
F/GorD/E.
You
to the
can move
higher
level
to move to the lower level menu
pull-down
menu
with
with OK or F button and
press the G button.
menu
Note :
In mono models, the Sound menu does not appear.
a.
d. In some models, AVL, Balance, Woofer, X-WAVE, Blue
back, Game or Booster will not display.
MENU
{
BG
{
System
Storage
{
I
Prog.Oedit
{
Normal
{
DK
Favourite
{
Turbo
{
M
{
2
AutoOprog.
{
Manual
(
PR
VOL
()
PR
)O}i{OOKOMENU
Station
VOL
OK
(
)O}i{OOKOMENU
()
PSM
{
CSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
menu
(
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
(
)O}i{OOKOMENU
)O}i{O OKOMENU
Picture
SSM
{
Balance
{
Treble
{
Bass
{
X-WAVE
{
menu
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
(
)O}i{OOKOMENU
(
)O}i{OOKOMENU
Sound
Clock
{
OffOtime
OnOtime
{
AutoOoff
{
menu
{
(
)O}i{OOKOMENU
Time
Language
Input
{
BlueOback
{
ChildOlock
{
menu
{
(
)O}i{OOKOMENU
Special
TV programme
8
menu
Setting
TV
stations
up
Up to 200 TV stations can be stored by programme numbers (0 to
199). Once you have preset the stations, you will be able to use the
D / E or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
5.
6.
7.
8.
9.
OiO
O
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto prog..
Press the G button to display the Auto prog. menu.
OiO
4.
O
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
3.
O
1
2
3
4
5
6
7
8
9
O
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Storage.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage pulldown menu. Any number under 10 is entered with a numeric
'00' in front of it, i.e. '005' for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo.
MENU
0
PR
VOL
()
VOL
OK
PR
()
Note :
a.
Turbo is faster than Normal and in some models, these
searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the MENU button.
Normal
{000
0
Turbo
OO
{0000
OOO
OO
(Normal search)
When auto
OOO
(Turbo search)
is completed, the Prog. edit menu
See the 'Programme edit' section to edit
programming
appears on the screen.
the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
9
Setting
Auto programme scan
To automatically scan the pictures of stored programmes, press
theD( DD ) or E( E ) button for about 3 seconds. The picture of stored
programmes appears on the screen one by one.
O
O
OiO
TV
stations
up
E
To stop auto programme
buttons.
scanning,
Manual programme
tuning
press any button except VCR
O
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
1
2
3
4
5
6
7
8
9
MENU
2.
3.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual.
Press the G button to display the Manual menu.
0
OiO
4.
5.
PR
VOL
()
VOL
OK
PR
()
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
O
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number
under 10 is entered with a numeric '00' in front of it, i.e. '005' for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '00' in
front of it, i.e. '005' for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Search
16. To store another
17.
10
Repeatedly
viewing.
{
station, repeat steps
4 to 15.
press the MENU button to return to normal TV
Setting
station name
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Name.
Press the G button on the Name pull-down menu.
Press the D button. You can use a blank, +, -, the numeric 0
to 9 and the alphabet A to Z.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
Assigning
1.
Repeat
2.
3.
4.
5.
6.
7.
TV
stations
up
a
O
O
OiO
O
viewing.
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
If the
Only
a
set with
is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
reception
MENU
Booster to On.
3.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
Press the G button.
4.
Press the D / E button to select On
1
2.
Repeat
pull-down
or
Off
on
Press the OK button.
6.
Repeatedly
viewing.
()
the Booster
menu.
5.
PR
press the MENU button to return to normal TV
VOL
VOL
OK
PR
()
11
TV
stations
up
Setting
{
{
{
{
AutoOprog.
Manual
Prog.Oedit
Favourite
(
)O}i{OOKOMENU
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
Press the MENU button and then D / E button to select the
Station menu.
2.
Press the G button and then D / E button to select Prog. edit.
Press the G button to display the Prog. edit menu.
3.
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
1
2
3
DeleteOOOCopy
MoveOOOOOSkip
4
5
6
7
8
9
(
)O}i{OOKOMENU
Deleting
1.
MENU
2.
0
a
programme
Select a programme to be deleted with the D / E
Press the RED button twice.
The selected
grammes
Copying
PR
()
1.
2.
VOL
VOL
OK
PR
()
2.
3.
all the
F / G button.
following
F / G button.
or
All the
one
a
pro-
programme
Select a programme to be copied with the D / E
Press the GREEN button.
Moving
1.
a
are
programme is deleted,
shifted up one position.
or
following
programmes
are
shifted down
position.
programme
programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
Select
a
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
to release this function.
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
Move0Off
(
)O}i{OMENU
programme number
Select a programme number to be skipped with the D / E or
F / G button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Skipping
1.
2.
3.
a
Repeatedly
12
press the MENU button to return to normal TV
viewing.
Setting
TV
stations
up
Favourite programme
O
O
This function lets you select your favourite programmes
directly.
1.
Press the MENU button to select the Station
2.
Press the G button and then D / E button to select Favourite.
3.
Press the G button to
display the Favourite
menu.
OiO
O
menu.
O
00
O
Favourite
{
OiOOO
4.
Press the D / E button to select
5.
desired programme with the F / G button.
To store another programme, repeat steps 4 to 5.
6.
Select
You
--
-----.
a
can
store up to 8 programmes.
7.
Press the OK button.
8.
Repeatedly
viewing.
MENU
press the MENU button to return to normal TV
PR
Repeatedly
()
press the FAVOURITE button to select stored favourite
programmes.
VOL
VOL
OK
PR
()
FAVOURITE
13
TV
stations
up
Setting
Calling
You
the programme table
check the programmes stored in the memory
the programme table.
can
Displaying programme table
Press the LIST button to display
the
by displaying
Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
(
)O}i{OOKOMENU
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
VOL
VOL
OK
PR
programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
()
a
()
LIST
programme table
20 programme table pages which contain 200 pro-
Paging through
There
are
a
grammes.
Pressing the D / E
or
F / G button
repeatedly
Press the LIST button to return to normal TV
14
turns the pages.
viewing.
Picture
Note: Picture
PSM
menu
options
are
adjustment
not available for RGB
input source.
(Picture Status Memory)
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
1.
2.
3.
PSM
CSM
Contrast
PSM
{
CSM
Contrast
{
{
{
{
{
Brightness
Colour
Sharpness
Brightness
Colour
Sharpness
{
{
{
{
{
{
(
)O}i{OOKOMENU
Dynamic
Standard
Mild
Game
User
(
)O}i{OOKOMENU
Press the OK
4.
5.
Repeatedly
viewing.
You
or F
button.
press the MENU button to return to normal TV
also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
can
CSM
You
or
(Colour Status Memory)
can
select the
bluish,
1.
2.
3.
4.
MENU
as
you
picture
prefer.
colour status;
standard, reddish, greenish
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select CSM.
Press the G button and then D / E button to select Standard,
Reddish, Greenish or Bluish on the CSM pull-down menu.
Repeatedly press the MENU button to return to normal TV
PR
VOL
()
VOL
OK
PR
()
viewing.
PSM
Picture
You
2.
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
can
ness
1.
adjustment
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
PSM
CSM
Contrast
{
{
{
Brightness
{
{
{
Colour
Sharpness
100
(
)O}i{OOKOMENU
3.
Press the G button and then F / G button to make
adjustments on the each sub menu.
Contrast
appropriate
80
(
}i{O)OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
15
Picture
adjustment
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
some
models, the
set will
Press the EYE/* button to switch the eye function
on or
off.
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
but
condition
EYE/
Note
a.
b.
PICTURE
TURBO/
If you press the PSM or TURBO PICTURE button with the eye
function, the eye function is automatically switched off.
EYE function is not available for RGB input source.
picture
selection
When this function is on, the
tinct than normal picture.
Repeatedly
Note
(option)
picture
will be
more
brilliant and dis-
press the TURBO PICTURE button to switch
(Turbo Picture off)
on or
off.
(Turbo Picture on)
:
a.
If you press the PSM button with the Turbo picture function, the
Turbo picture function is automatically switched off.
b.
TURBO PICTURE function is not available for RGB input
source.
16
in green does not appear continuin yellow appears each time the picture
:
Turbo
PSM
display
the display
changes.
Sound
adjustment (option)
Sound
adjustment is an optional function only
adjustment can perform this function.
SSM
You
a
set with sound
(Sound Status Memory)
can
select your
preferred
sound
setting; Flat, Music,
Movie
or
Speech.
OiO
1.
Press the MENU button and then D / E button to select the
Sound menu.
2.
Press the G button to select SSM.
Press the G button and then D / E button to select
ting on the SSM pull-down menu.
3.
a
O
sound set-
MENU
OiO
4.
Press the OK
5.
Repeatedly
viewing.
You
or
O
F button.
press the MENU button to return to normal TV
PR
also
recall a desired sound (Flat, Music, Movie,
User) with SSM/* button on the remote control. The
can
Speech or
sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
VOL
()
VOL
OK
PR
()
SSM/
Sound
1.
2.
adjustment
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound
item; AVL (option), Balance, Treble, Bass
or
Woofer
(option).
3.
Press the G button.
OiO
4.
5.
Make desired
O
adjustment with
on each pull-down menu.
Repeatedly press the MENU
viewing.
the F /
G,
D / E or OK button
button to return to normal TV
17
Sound
SSM
Balance
Treble
Bass
X-WAVE
{
{
{
{
{
X-WAVE
You
1.
2.
3.
(
)O}i{OOKOMENU
adjustment (option)
can
(Wireless Sound) (option)
also listen to the sound
through
the FM receiver.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to tune in a frequency on the X-WAVE pull-down menu.
SSM
Balance
Treble
Bass
{
{
{
{
X-WAVE
{
106.7OMHz
87.7OMHz
87.9OMHz
88.1OMHz
88.3OMHz
88.5OMHz
88.7OMHz
88.9OMHz
Off
106.9OMHz
107.1OMHz
107.3OMHz
107.5OMHz
107.7OMHz
107.9OMHz
Off
or
(
)O}i{OOKOMENU
4.
Match the TV's
Some models
1.
MENU
2.
3.
PR
VOL
are
frequency
displayed
as
shown below.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to select Set Freq.
SSM
Balance
Treble
Bass
X-WAVE
()
{
{
{
{
{
X-WAVE
88MHz
SetOFreq
{
107MHz
or
Off
VOL
OK
and the FM receiver's.
FMO95.0MHz
PR
()
(
)O}i{O OKOMENU
4.
}{i0-9OOKOMENU
Press the G button to tune in
a
frequency
on
the X-wave
menu.
5.
SOUND
TURBO/
Usethenumber0to9orpresstheF/Gbuttontomatchthe
TV's frequency and the FM receiver 's.
Note:
a. If the reception is poor or weak, select a different frequency.
b. For best results, there should be no more that 5m (16.4ft)
between the TV and FM Receiver.
In certain areas, the FM transmitter ability may be weak, such
c.
as near a broadcast tower.
d. The reception sensitivity may depend on the kinds of receiver
(FM radio).
Turbo sound selection
(option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
MEGA TURBO
(Turbo
18
Sound
off)
(Turbo
Sound
on)
Sound
adjustment (option)
Sound output selection (option)
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II/* button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
L+L
:
:
R+R
:
speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right
loud-speakers.
Stereo/Dual
reception (option)
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
I/II/
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II/* button twice. In mono reception the
depth of sound is improved. To switch back to stereo, press the
I/II/* button twice again.
for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/* but-
Language selection
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II/* button repeatedly.
1.
2.
3.
equipped
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
19
Time
Setting the
o
1.
oo
2.
3.
OiO
Setting
clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
io
O
oi
o
oo
OiO
4.
5.
6.
O
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting the
On/Off timer
this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
By using
MENU
1.
2.
PR
()
3.
VOL
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
VOL
OK
o
PR
o
()
io
oi
o
OiO
4.
5.
6.
7.
O
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset
d.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
.
Auto off
If you select On on the Auto off pull-down menu, the set will automatically switch itself to standby mode approximately ten minutes
after a TV station stops broadcasting.
1.
2.
3.
4.
5.
20
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto off.
Press the G button and then D / E button to select On or Off on
the Auto off pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
Other functions
TV and AV modes
o
be set for TV or AV mode. AV mode is used when a video
Inputs
cassette recorder (VCR), or other equipment is connected to the set.
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
Press the MENU button and then D / E
Special
2.
3.
o
OiO
O
button to select the
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1
AV2, Component (option) on the Input pull-down menu.
or
o
1
2
3
4
5
6
7
8
9
0
TV/AV
o
OiO
4.
MENU
O
AV1 : VCR connected to the AV1 sockets of the
AV2 : VCR connected to the AV2 sockets of the
COMPONENT : DVD Player connected to the
sockets on the set (option)
Repeatedly press the MENU button to return
set
set
COMPONENT
PR
to normal TV
viewing.
VOL
Alternatively
you
TV/AV button.
In AV
mode,
can
select the TV
to return to TV
or
AV mode
mode, press the
()
by pressing
the
VOL
OK
PR
()
D / E or NUMBER but-
tons.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
ing.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
5.
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the
menus.
21
Other functions
Blue back
If you select On
ground appears
o
o
1.
O
2.
3.
4.
5.
on
on
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
Special
OiO
(option)
button to select the
menu.
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off
on the Blue back pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
1
2
3
4
5
6
7
8
9
0
TV/AV
MENU
Note:
a.
The blue background automatically appears on the screen
when there is no signal in AV mode.
b. In the Twin picture mode, PIP, Component mode, the blue background doesn't appear on the screen.
Games
(option)
Game is an
function by
PR
VOL
1.
()
Press the MENU button and then D / E
Special
VOL
OK
2.
3.
4.
PR
optional function, only a set with game
using the remote control handset.
()
SLEEP
can
perform
this
button to select the
menu.
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select a game and then press the OK
button.
You can enjoy the game by using the GAME owner's manual.
Note :
a.
Press the TV/AV
or
MENU button to return to the normal TV
viewing.
b.
If you want
the game.
Sleep
a new
game, press the RED button to start
during
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30,
play Sleep
60, 90, 120, 180 and 240. The timer begins to count down from the
number of minutes selected.
-
-
-
Note :
a.
To view the
remaining sleep time, press the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display Sleep
appears.
When you switch the set off, the set releases the preset sleep
time.
-
c.
22
-
-
Connection of external
You
can
connect additional
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
Y
LL
PB
PR
DVD INPUT
COMPONENT
(480i)
OUT
AV
VIDEO
(L/MONO)AUDIO (R)
IN
Aerial socket
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
ANT IN
75‰
OUT
VIDEO
AUDIO
IN
Audio/Video in/out sockets
1.
2.
3.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV (or AV1), AV 2.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
VCR
VIDEO
MENU
You
tape
also record programmes received
via audio/video out sockets.
can
by
the TV
on
OK
VOL
video
1.
2.
3.
4.
in sockets
R
VCR
(option)
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the DVD player to the COMPONENT
INPUT sockets (Y PB PR) on the set.
Connect the audio cable from the DVD player to AUDIO IN
sockets of AV (or AV1).
Press the TV/AV button to select Component.
Press the PLAY button on the DVD player.
The COMPONENT playback picture appears on the screen.
Headphone
AUDIO
AV
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Component
L
PR
ANT IN
Y
LL
PB
P
DVD INPUT
COMPONENT
(480i)
OUT
AV
VIDEO
(L/MONO) AUDIO (R)
IN
DVD
Player
socket
models which have a headphone socket can perform this
function.
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphones. To adjust the
headphone volume, press the F / G button.
Only
If you press the MUTE
switched off.
VIDEO
MENU
OK
VOL
L
AUDIO R
PR
AV
button, the sound from the headphone's is
23
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF

advertising